Develop Bugs

incorrect unlock code from AT&T

i got two nokia lumina 900's, one unlock code that they provided was good, the second unlock code for the second phone is not good I got the unlock code from AT&T. However, it just doesn't work. When I was asked for an unlock code on Lumia 900, I input the 8 digits code, press Enter, and it said "incorrect PIN". I've called AT&T services tons of times, and it ends up that they asked me to call Nokia support. The IMEI I gave to them is 100% correct, and AT&T stated again and again they've given me the right unlock code. If anybody can help me with this i would greatly appreciate it, I am pretty much stuck right now and I don't want to sell it and for someone else to have the same problem. Thank you

ivan242 said:
i got two nokia lumina 900's, one unlock code that they provided was good, the second unlock code for the second phone is not good I got the unlock code from AT&T. However, it just doesn't work. When I was asked for an unlock code on Lumia 900, I input the 8 digits code, press Enter, and it said "incorrect PIN". I've called AT&T services tons of times, and it ends up that they asked me to call Nokia support. The IMEI I gave to them is 100% correct, and AT&T stated again and again they've given me the right unlock code. If anybody can help me with this i would greatly appreciate it, I am pretty much stuck right now and I don't want to sell it and for someone else to have the same problem. Thank you
Click to expand...
Click to collapse
I am also facing this stupid problem. The Unlock Code provided by AT&T is not working, I tried to unlock the phone with AT&T and non AT&T sim.
I even contacted Nokia Customer care and was redirected to AT&T. Nokia statement "Nokia is not responsible for the Lock and Unlock of the mobile. This is done by AT&T, and Nokia cannot help"
I tried contacting the AT&T customer care again and was told they cannot help me. If the code is not being accepted by the mobile, at&T is not responsible.
Stupid AT&T, will soon move to T-Mobile

Ask for a supervisor, and a case with the unlocking department.

did u get any info on the unlock coz mine to is the same problem , the code is incorrect for my nokia lumia 900

i get the unlock code for my lumia900, but when i type the code into the device, it show me the code is incorrect. and I am sure the code is right, because i call them again and get the same code as first time. so what should I do right now. i only have 3 attempts remaining.
please help me :crying:

wWJimmyCuongWw said:
i get the unlock code for my lumia900, but when i type the code into the device, it show me the code is incorrect. and I am sure the code is right, because i call them again and get the same code as first time. so what should I do right now. i only have 3 attempts remaining.
please help me :crying:
Click to expand...
Click to collapse
i only have 2 attempts remaining

same here i have tried with 2 resellers given me same code ,code says incorrect pin , ready to pay as much as 50 usd for the working unlock code. some help here guys . hope some can make direct unlock with usb or box . that would be great ,

ivan242 said:
i only have 2 attempts remaining
Click to expand...
Click to collapse
Just try 2 attempts remaining. Then it say your sim card blocked. Now, you put your unlock code in and see what happend. I unlocked my phone successful with this method. Hope it will work with you.

Try Adding A Zero infront
I also got an unlock code from ATT which didn't sem right because it looked a number short. I had 10 attempts to play with. I tried 3 times with the code and each time it said it was wrong. Then I did something, I added "0"infront of the numbers they gave me and it worked. So I guess some unlockers do not consider the Zero a factor, but apparently the phone does. Just try that and see. Just my experience. Hope it helps some of you.

well mine is already 8 digit code , which starts with 0 . anyone got a correct code after the wrong code from at&t . share here please

Sea problem here, 4 websites gave me the same 8 digit code but its the incorrect one, ATT won't entertain me cause I am a non ATT Customer. Have 4 attempts remaining.
What do I do?

minhtien said:
Just try 2 attempts remaining. Then it say your sim card blocked. Now, you put your unlock code in and see what happend. I unlocked my phone successful with this method. Hope it will work with you.
Click to expand...
Click to collapse
are u sure bro , has anyone tried this , thsi guy says after the 10 times counter finished , he tried the code when its says to enter puk code , anyone here who doesnt have lock counter left can try unlock code there and let me know please , coz i have 4 more tries to unlock code . dont wanna take a risk yet .

PUK code is longer than the unlock code, how did the 8 digit unlock code work?
Sent from my Lumia 900 using Board Express

pyk said:
Sea problem here, 4 websites gave me the same 8 digit code but its the incorrect one, ATT won't entertain me cause I am a non ATT Customer. Have 4 attempts remaining.
What do I do?
Click to expand...
Click to collapse
Even with AT&T customer care, the unlock code is not working. The Unlock code provided by the AT&T customer care does not work with my mobile.
AT&T customer care is unable to resolve the issue and same response from Nokia.
I will never buy AT&t contract in future. Sick

SUCCESS
minhtien said:
Just try 2 attempts remaining. Then it say your sim card blocked. Now, you put your unlock code in and see what happend. I unlocked my phone successful with this method. Hope it will work with you.
Click to expand...
Click to collapse
I TRIED THIS AND ITS A SUCCESS, FINALLY!!!!!!!
Go ahead guys, now how do we debrand this to get internet sharing working??
Has anyone successfully flashed another RM-808 rom on an ATT Device?

pyk said:
I TRIED THIS AND ITS A SUCCESS, FINALLY!!!!!!!
Go ahead guys, now how do we debrand this to get internet sharing working??
Has anyone successfully flashed another RM-808 rom on an ATT Device?
Click to expand...
Click to collapse
are u sure bro , please verify this , will try myself today if only u are sure .

nokiam 900 unlock code not work
Damionix said:
I also got an unlock code from ATT which didn't sem right because it looked a number short. I had 10 attempts to play with. I tried 3 times with the code and each time it said it was wrong. Then I did something, I added "0"infront of the numbers they gave me and it worked. So I guess some unlockers do not consider the Zero a factor, but apparently the phone does. Just try that and see. Just my experience. Hope it helps some of you.
Click to expand...
Click to collapse
i tried add 0 on front of 8 unlock code (provide from att & 3rd party) it won't work, either. someone can help, please.
---------- Post added at 05:17 PM ---------- Previous post was at 05:10 PM ----------
pyk said:
I TRIED THIS AND ITS A SUCCESS, FINALLY!!!!!!!
Go ahead guys, now how do we debrand this to get internet sharing working??
Has anyone successfully flashed another RM-808 rom on an ATT Device?
Click to expand...
Click to collapse
Hi, bro,
How you can do that?
Please, teach me step by step.
Thanks

CHIMCANHCUT said:
i tried add 0 on front of 8 unlock code (provide from att & 3rd party) it won't work, either. someone can help, please.
---------- Post added at 05:17 PM ---------- Previous post was at 05:10 PM ----------
Hi, bro,
How you can do that?
Please, teach me step by step.
Thanks
Click to expand...
Click to collapse
Very simple dude, you get 10 tries to enter the right unlock code. Every time you try it says incorrect code which in fact is the right code.
You exhaust the your 10 permits by entering the code again and again, it will then ask you for the PUK code. That's when you again enter the code you have.
Voilà, your phone will be unlocked.
Hope this is clear

@pyk: I have the same situation as your. I am still waiting more than two weeks for the answer from AT&T, . Please confirm this method. Thank you very much!
@chimcanhcut: do you try this method?

minhtien said:
Just try 2 attempts remaining. Then it say your sim card blocked. Now, you put your unlock code in and see what happend. I unlocked my phone successful with this method. Hope it will work with you.
Click to expand...
Click to collapse
pyk said:
I TRIED THIS AND ITS A SUCCESS, FINALLY!!!!!!!
Go ahead guys, now how do we debrand this to get internet sharing working??
Has anyone successfully flashed another RM-808 rom on an ATT Device?
Click to expand...
Click to collapse
skid235 said:
@pyk: I have the same situation as your. I am still waiting more than two weeks for the answer from AT&T, . Please confirm this method. Thank you very much!
@chimcanhcut: do you try this method?
Click to expand...
Click to collapse
First off, thanks to minhtien & pyk
Like skid235, I was looking for confirmation that this worked. skid235--have you tried this method yet?
EDIT: I TRIED IT AND IT WORKS! Time to shout this from the mountaintops!

[Q] Is the cell unlock code dependent on RUU/firmware?

I decided to upgrade to M9. I currently have a T-mobile M8, that I decided to give away to a friend, he does not use T-mobile or live in the US.
So the question is, if I flash a HTC unlocked edition RUU, will the Sim unlock code provided by T-mobile still work?

Just dropping by....
siddardhab said:
I decided to upgrade to M9. I currently have a T-mobile M8, that I decided to give away to a friend, he does not use T-mobile or live in the US.
So the question is, if I flash a HTC unlocked edition RUU, will the Sim unlock code provided by T-mobile still work?
Click to expand...
Click to collapse
From what I know, no, it might not work because the phone might not even ask for the code.
In order to unlock the phone you have to insert a NON accepted sim and get it to prompt for the "SIM network unlock PIN".
If this is the situation, you can try flashing and see if it prompts for the code with your friends sim card.
IF, however, it does ask for the code, just try it first. If it doesn't work you have to flash back to stock Tmobile firmware, Unlock it, then it will work with you friend.
I recommend a few sites like cellphoneunlock.net or cellunlocker.net as I have had much success with them over the years. I don't know if you are using other sites but I am just contributing what I know so far
Good luck to you and your friend! :good:

1sagain said:
From what I know, no, it might not work because the phone might not even ask for the code.
In order to unlock the phone you have to insert a NON accepted sim and get it to prompt for the "SIM network unlock PIN".
If this is the situation, you can try flashing and see if it prompts for the code with your friends sim card.
IF, however, it does ask for the code, just try it first. If it doesn't work you have to flash back to stock Tmobile firmware, Unlock it, then it will work with you friend.
I recommend a few sites like cellphoneunlock.net or cellunlocker.net as I have had much success with them over the years. I don't know if you are using other sites but I am just contributing what I know so far
Good luck to you and your friend! :good:
Click to expand...
Click to collapse
siddardhab said:
I decided to upgrade to M9. I currently have a T-mobile M8, that I decided to give away to a friend, he does not use T-mobile or live in the US.
So the question is, if I flash a HTC unlocked edition RUU, will the Sim unlock code provided by T-mobile still work?
Click to expand...
Click to collapse
Just make sure the ROM you are flashing supports official HTC codes, I think that is how it goes.
I can say that if you need codes use cellunlocker.net , they are pretty legit.

[Q] Galaxy S6 Edge T-Mobile Unlock by SIM code

Hi everybody,
I´ve got my galaxy S6 edge (network locked) from t-mobile. Immediately ordered an unlock code. It tooks 24 hours to receive the code, but rigth now, a week later, the code isn't working. I´ve tried to unlock the phone by several days, but the code it's not working. It simply doesn´t unlock the phone.
Anyone have the same problem ? Did you get it unlocked ? If so, can you share us the way you manage to unlock it?
Thanks in advance.

try this
#7465625*638*yourcode#

Z51 said:
try this
#7465625*638*yourcode#
Click to expand...
Click to collapse
Thank you very much for your reply. I´ve tried that way before posting here, and I,ve got same notice, the code doesn't work.
I 've been reading that many t-mobile users had the same problem.

Z51 said:
try this
#7465625*638*yourcode#
Click to expand...
Click to collapse
Isn't it typed in this way?
#7465625*638*#
Then you get the option to enter the lock code here

dnkeyhnter said:
Isn't it typed in this way?
#7465625*638*#
Then you get the option to enter the lock code here
Click to expand...
Click to collapse
Anyway I tried that way, but still got the message "unlock unsuccesful".

themrmind said:
Anyway I tried that way, but still got the message "unlock unsuccesful".
Click to expand...
Click to collapse
The Samsung Galaxy S6 Edge from T-Mobile can not be unlocked, they changed the unlock process and it can only be done through T-Mobile Customer Service. The unlock codes and unlock services for the Samsung Galaxy S6 Edge are no longer available.

dnkeyhnter said:
Isn't it typed in this way?
#7465625*638*#
Then you get the option to enter the lock code here
Click to expand...
Click to collapse
digitalplatinum said:
The Samsung Galaxy S6 Edge from T-Mobile can not be unlocked, they changed the unlock process and it can only be done through T-Mobile Customer Service. The unlock codes and unlock services for the Samsung Galaxy S6 Edge are no longer available.
Click to expand...
Click to collapse
Samsung USA All Models 1-2 Days 35935906******* Service Provider: 41925935 Network Code: 68414648 $19.00
worked for me. T-Mobile version. fully unlocked now
---------- Post added at 04:35 PM ---------- Previous post was at 04:33 PM ----------
dnkeyhnter said:
Isn't it typed in this way?
#7465625*638*#
Then you get the option to enter the lock code here
Click to expand...
Click to collapse
yes sir, my mistake

Z51 said:
Samsung USA All Models 1-2 Days 35935906******* Service Provider: 41925935 Network Code: 68414648 $19.00
worked for me. T-Mobile version. fully unlocked now
---------- Post added at 04:35 PM ---------- Previous post was at 04:33 PM ----------
yes sir, my mistake
Click to expand...
Click to collapse
¿ Really got a working unlock code ?
Can you please tell us where did you get it ?
Thank you very much.

themrmind said:
¿ Really got a working unlock code ?
Can you please tell us where did you get it ?
Thank you very much.
Click to expand...
Click to collapse
From the s6 forum:
http://forum.xda-developers.com/showthread.php?p=60312531

Unlockdeals.com I've been using for them for years. Send an email before in case it doesn't work and ask if you can get a refund. I've had 3 people message me saying it didn't work. So I'm trying to figure out what's going on.

https://blog.unlockbase.com/unlock-samsung-galaxy-s6-tmobile-usa/
But no edge firmware yet only s6

Galaxy Samsung S6 Is Good

themrmind said:
Anyway I tried that way, but still got the message "unlock unsuccesful".
Click to expand...
Click to collapse
How about rooting and delete the unlock app, then typing #7465625*638*# and the unlock code? This will work? I did not receive the unlock code for my S6 Edge yet, so can't try this.

therenegade said:
How about rooting and delete the unlock app, then typing #7465625*638*# and the unlock code? This will work? I did not receive the unlock code for my S6 Edge yet, so can't try this.
Click to expand...
Click to collapse
Now I got my unlock code and its not working. Any Ideas?

Z51 said:
Samsung USA All Models 1-2 Days 35935906******* Service Provider: 41925935 Network Code: 68414648 $19.00
worked for me. T-Mobile version. fully unlocked now
---------- Post added at 04:35 PM ---------- Previous post was at 04:33 PM ----------
yes sir, my mistake
Click to expand...
Click to collapse
So youre saying you have a T-Mobile Galaxy S6 Edge and you unlocked it with a code? I have my code on order for this phone we purchased, but it does not prompt for a code. You used the #7465625*638*# option to do this?? I read in another forum that once the code is entered in there and the message is successful, once it reboots you still get a network error..
Please let me know the exact steps you used on your TMob S6 edge once you had the code. Thanks dude.

digisolnc said:
So youre saying you have a T-Mobile Galaxy S6 Edge and you unlocked it with a code? I have my code on order for this phone we purchased, but it does not prompt for a code. You used the #7465625*638*# option to do this?? I read in another forum that once the code is entered in there and the message is successful, once it reboots you still get a network error..
Please let me know the exact steps you used on your TMob S6 edge once you had the code. Thanks dude.
Click to expand...
Click to collapse
In my case, I have an unlock code, I input the code by #7465625*638*# without a sim and connected to the wireless. It said Unlock succesful. I reboot before putting a sim for a locked company (TELCEL from Mexico) in the phone and it is still locked.
Still waiting for the custom rom to try to unlock it that way. Galaxy S6 Edge from T-Mobile is the only carrier with this problem I guess.
I already asked for T-mobile to unlock it. They say I am totally elegible for unlock it (by app), but I had to wait for the process in their system.
I 'll tell you if this status change.

themrmind said:
In my case, I have an unlock code, I input the code by #7465625*638*# without a sim and connected to the wireless. It said Unlock succesful. I reboot before putting a sim for a locked company (TELCEL from Mexico) in the phone and it is still locked.
Still waiting for the custom rom to try to unlock it that way. Galaxy S6 Edge from T-Mobile is the only carrier with this problem I guess.
I already asked for T-mobile to unlock it. They say I am totally elegible for unlock it (by app), but I had to wait for the process in their system.
I 'll tell you if this status change.
Click to expand...
Click to collapse
Yeah, I just purchased one at our store which is financed assuming I could just buy the code like we always do.
I quoted user: Z51 or whatever because he says he ordered his code from unlockdeals and successfully unlocked a TMobile S6 Edge. I hope he responds and clarifies what he did to get this to work because it seems like everyone else cant get it going. I NEEEEED this phone unlocked in order to sell it for the full amount I was hoping.

We may need to be a bit patient...
themrmind said:
Hi everybody,
I´ve got my galaxy S6 edge (network locked) from t-mobile. Immediately ordered an unlock code. It tooks 24 hours to receive the code, but rigth now, a week later, the code isn't working. I´ve tried to unlock the phone by several days, but the code it's not working. It simply doesn´t unlock the phone.
Anyone have the same problem ? Did you get it unlocked ? If so, can you share us the way you manage to unlock it?
Thanks in advance.
Click to expand...
Click to collapse
From what I understand, you have to flash a METROPCS S6 EDGE stock rom on top of your phone to get rid of T-mobiles nasty unlocking app restriction.
Even if you use those dial pad codes into your phone it wont work.
Which brings up the question: How long till MetroPCS releases the S6 EDGE and someone dumps the stock ROM here in our forums. Then we are good to go.
I unlocked a lot of phones and they ALL get unlocked by inserting a NON accepted sim card into the phone and they prompt for a message " SIm network unlock Pin"
Hope this helps!

1sagain said:
From what I understand, you have to flash a METROPCS S6 EDGE stock rom on top of your phone to get rid of T-mobiles nasty unlocking app restriction.
Even if you use those dial pad codes into your phone it wont work.
Which brings up the question: How long till MetroPCS releases the S6 EDGE and someone dumps the stock ROM here in our forums. Then we are good to go.
I unlocked a lot of phones and they ALL get unlocked by inserting a NON accepted sim card into the phone and they prompt for a message " SIm network unlock Pin"
Hope this helps!
Click to expand...
Click to collapse
I was told that MPCS isn't releasing the edge, S6 only.

cpufrost said:
I was told that MPCS isn't releasing the edge, S6 only.
Click to expand...
Click to collapse
The real question is, does he unlocked a lot of S6 Edges from tmobile ?

[Q] Having trouble unlocking phone from Wind

Man, what a nightmare...
I moved from Vancouver to California in February, and I've been trying to unlock my phone from Wind ever since. They provided me with an unlock code that doesn't seem to work. Then, after waiting 30 days for them to get me a new code, they gave me the same one. At this point, I doubt that the code is a mismatch to my IMEI, but it's just not working...
Here's the facts:
I have a SGH-T999V running 4.4.2. When I put in the T-Mobile sim card that I'd like to use and then try to put in the unlock code, I get an error message saying that the unlock code was unsuccessful.
Here are the questions that I have:
Do I need to be on the Wind Network to have the unlock code work? I selected T-Mobile as the network operator ever since I moved down to California.
It seems like other people with my version of the phone have had similar issues...is there a solution to this problem?
Can the fine, fine people of this forum help?

This has been a problem since 4.3 with some Samsung devices. Only thing I can suggest is try regionlock away from chainfire to see if it will unlock, which is probably unlikely. Make sure you are on stock firmware with stock kernel

Andrew K. Sterling said:
Hi,
What message are you getting after inserting the code Wind provided?
Click to expand...
Click to collapse
Hi Andrew, it just says "Network unlock request unsuccessful."
I tried rooting my phone and using regionlockaway, which said that the patch was successful, but it seems that wasn't the solution.
It's pretty frustrating since I paid Wind for the unlock code, but it won't unlock my phone! Do you think that there is anything else I can do?

poageboy said:
Hi Andrew, it just says "Network unlock request unsuccessful."
I tried rooting my phone and using regionlockaway, which said that the patch was successful, but it seems that wasn't the solution.
It's pretty frustrating since I paid Wind for the unlock code, but it won't unlock my phone! Do you think that there is anything else I can do?
Click to expand...
Click to collapse
Only other thing is to contact Samsung, since it seems to be a Samsung issue at this point

serio22 said:
Only other thing is to contact Samsung, since it seems to be a Samsung issue at this point
Click to expand...
Click to collapse
Welp, I'll give it a try, but I've seen in other posts that people have been given the runaround by Samsung, who say, "This is because of how Wind locked your phone, can't help you."
I'll update this post with my progress, in case other people are having the same trouble.

Who has an S6 unlocked with metropcs ?

If you have S6 from Tmobile unlocked with metropcs , can you please post a screenshot of "abour device" ?

batillojr said:
If you have S6 from Tmobile unlocked with metropcs , can you please post a screenshot of "abour device" ?
Click to expand...
Click to collapse
hey, I have an S6 128GB originally TMobile, flashed the Metro ROM and its now unlocked. What do you want to see in particular in About Device?

digisolnc said:
hey, I have an S6 128GB originally TMobile, flashed the Metro ROM and its now unlocked. What do you want to see in particular in About Device?
Click to expand...
Click to collapse
i wanted to see if the baseband changed from tmobile to a metropcs baseband

batillojr said:
i wanted to see if the baseband changed from tmobile to a metropcs baseband
Click to expand...
Click to collapse
Baseband with the Metro ROM is G920T1UVU1AOCH, but the problem is, I flashed both of the S6's I have here to the Metro ROM to unlock them so I have no idea what the original baseband was lol I hope you do!
Any luck on the S6 Edge unlock? I scour the internet everyday for developments but I havent seen anything I feel like this S6 Edge I have is either going to sit here forever or Ill have to sell it as a blacklisted phone because its financed and I KNOW its going to get blocked.

digisolnc said:
Baseband with the Metro ROM is G920T1UVU1AOCH, but the problem is, I flashed both of the S6's I have here to the Metro ROM to unlock them so I have no idea what the original baseband was lol I hope you do!
Any luck on the S6 Edge unlock? I scour the internet everyday for developments but I havent seen anything I feel like this S6 Edge I have is either going to sit here forever or Ill have to sell it as a blacklisted phone because its financed and I KNOW its going to get blocked.
Click to expand...
Click to collapse
the fact that baseband has a G920T1 means that it did changed the radio , while every damn firmware i tried never change the baseband ., is good to know though ... and if you have an S6 Edge try this before selling it .. ask to borrow someone's tmobile sim card and try to at least do a temporary unlock if that doesn't work then download the app VyprVPN select germany (i did) with the tmobile sim still in and try temporary unlock again,,, doing this at least it bought a month's use of my phone , maybe a solution will come up later on.

batillojr said:
the fact that baseband has a G920T1 means that it did changed the radio , while every damn firmware i tried never change the baseband ., is good to know though ... and if you have an S6 Edge try this before selling it .. ask to borrow someone's tmobile sim card and try to at least do a temporary unlock if that doesn't work then download the app VyprVPN select germany (i did) with the tmobile sim still in and try temporary unlock again,,, doing this at least it bought a month's use of my phone , maybe a solution will come up later on.
Click to expand...
Click to collapse
So youre saying that when you flash the Metro ROM to it, its not changing your baseband? I used the one posted by UnlockBase. Were you able to successfully unlock yours?
And yeah, Ive tried the TEMP and PERM unlock on the S6 Edge. I put my TMobile dealer SIM in it hoping that would help as its a free $80 monthly demo line I get for selling TMobile service. I would gladly try that method, but since we sell these phones, a TEMP unlock wont help me I need a permanent solution so once I sell it, Ill know the customer wont have any issues down the road. I have both of the S6's up for sale now that they are unlocked, but I have always wondered if Samsung REGION LOCKS these phones. Ive tested my personal ATT line in it, and it works great, but alot of my customers on eBay export these phones overseas, so Im hoping these new Samsungs arent region locked :/

digisolnc said:
So youre saying that when you flash the Metro ROM to it, its not changing your baseband? I used the one posted by UnlockBase. Were you able to successfully unlock yours?
And yeah, Ive tried the TEMP and PERM unlock on the S6 Edge. I put my TMobile dealer SIM in it hoping that would help as its a free $80 monthly demo line I get for selling TMobile service. I would gladly try that method, but since we sell these phones, a TEMP unlock wont help me I need a permanent solution so once I sell it, Ill know the customer wont have any issues down the road. I have both of the S6's up for sale now that they are unlocked, but I have always wondered if Samsung REGION LOCKS these phones. Ive tested my personal ATT line in it, and it works great, but alot of my customers on eBay export these phones overseas, so Im hoping these new Samsungs arent region locked :/
Click to expand...
Click to collapse
when you try to flash any firmware with odin it ends on FAIL.. you can flash rom with twrp but baseband remains the same ,, so i dont know if the unlock app from tmobile is tied in the bootloader or radio or something else ... so far i'll just enjoy the 30days left and see what happens after that ... cause after it accepted my att sim card a message will appear reminding me the unlock was to end on Jul01 and if i wanna to do permanent unlock, so i flash a firmware from a canada version G925W so the reminder went away but i dont know if that means that in 30 days i'll be locked again

batillojr said:
when you try to flash any firmware with odin it ends on FAIL.. you can flash rom with twrp but baseband remains the same ,, so i dont know if the unlock app from tmobile is tied in the bootloader or radio or something else ... so far i'll just enjoy the 30days left and see what happens after that ... cause after it accepted my att sim card a message will appear reminding me the unlock was to end on Jul01 and if i wanna to do permanent unlock, so i flash a firmware from a canada version G925W so the reminder went away but i dont know if that means that in 30 days i'll be locked again
Click to expand...
Click to collapse
I gotcha. I did something similar. I flashed the international ROM on the S6 EDGE via TWRP and it told me the code is incorrect. I know the code is correct because if I ever it in with no SIM and the #7465625*638*# and put the code in it says successfull. This is SOOOOOO frustrating. The lock has to do with the radio or the bootloader/baseband.

batillojr said:
when you try to flash any firmware with odin it ends on FAIL.. you can flash rom with twrp but baseband remains the same ,, so i dont know if the unlock app from tmobile is tied in the bootloader or radio or something else ... so far i'll just enjoy the 30days left and see what happens after that ... cause after it accepted my att sim card a message will appear reminding me the unlock was to end on Jul01 and if i wanna to do permanent unlock, so i flash a firmware from a canada version G925W so the reminder went away but i dont know if that means that in 30 days i'll be locked again
Click to expand...
Click to collapse
I am interested to see if that works which it may as the app is not there to retrigger the lock. You never know.

I currently have metro pcs and I bout an unlocked Samsung galaxy s6. My original Sim is too big so I have to go to metro to get a new one but the phone is not reading the new sim in order for them to program it. How do I fix this or get around this? Should I not let metro try to activate the phone?