INSTALL OFFICIAL CM12 TO YOUR YU YUREKA
Yu Yureka has got the official Cyanogenmod 12S sealed and signed by Google which is being rolled out today! Few users has already got the update and we have captured the OTA link , that means now we don't have to wait for the OTA update. We can also install them manually and can enjoy the sweeter taste of Lollipop.
Hey guys,
Here's the official link of CM12S OTA package for Yu Yureka:
http://builds.cyngn.com/cyanogen-os...deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
Will update this post with mirrors shortly. Happy Flashing!
Special Thanks To Caesar & Chitu98
WARNING!!!!
ONCE YOU HAVE UPGRADED TO LOLLIPOP (cm-12.0) THEN DO NOT FLASH THE KITKAT (cm-11.0) IMAGES AS IT MAY LEAD TO THE DEVICE GETTING BRICKED!
Mirrors:
Pcloud -
CLICK HERE
Mediafire -
CLICK HERE
GDrive -
CLICK HERE (provided by @kamrul)
Yandex -
CLICK HERE
Stock Recovery:
DevHost - http://d-h.st/FSH (provided by tartutic07
Requirements :-
1.) Data Plan to download approx 680 mb OTA file.
2.) Charged Yu Yureka device.
3.) Stock recovery, download here
4.) Rashr to flash stock recovery.
5.) Backup all your data.
6.) Patience, it will require 30 min to install the update
Steps to Install the OTA update :-
1.) Flash the stock recovery first from Rashr or Flashify.
2.) Download the OTA zip file and place it in your storage.
3.) Power off your device, Now press Volume Up + Volume Down + Power button simultaneously.
4.) Cyanogenmod Official Recovery will be opened.
5.) Select 2nd option i.e. Apply Update
6.) Select the storage, you have copied the OTA zip file
7.) Select the OTA Zip file, and open it, it will start to install the update.
8.) Wait for the completing installation, you have to reboot it manually .
9.) First bootup will take time, so keep patience.
10.) Voila You have successfully updated your Yu Yureka to CM12S.
NOTE: We are not responsible to any damage to your device. Do at your own risk!
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fastboot files
can you please upload the fastboot files also preferably on gdrive
rohanvaja said:
can you please upload the fastboot files also preferably on gdrive
Click to expand...
Click to collapse
I Can't Bro Sorry But i'll get it then will upload it for you
Just brought the device yesterday..and it got update yesterday itself.. (got it delivered today )
and just about to flash lollipop.
But 1 req: plz..
plz confirm the
md5 hash : d8b8fdbfe0796b0f8f2f370526a5841a
thanks mate downloading it through pc,hope it does not messes up with 4.4 root binaries i.e. root should not cause any prob while updating
can you confirm that.
Ha\/0c said:
....plz confirm the md5 hash : d8b8fdbfe0796b0f8f2f370526a5841a
Click to expand...
Click to collapse
that's what i got too.
Question ?
Just a quick question... I upgraded to Android L via manual update... do we get "Cyanogen" Boot screen & "Android is Upgrading..." on the first reboot ?
Appreciate your response..
matwaking said:
thanks mate downloading it through pc,hope it does not messes up with 4.4 root binaries i.e. root should not cause any prob while updating
can you confirm that.
Click to expand...
Click to collapse
No bro Just Flash Stock CM Recovery Then Flash Lollipop With Stock Cyanogen Recovery
Kiranb212 said:
Just a quick question... I upgraded to Android L via manual update... do we get "Cyanogen" Boot screen & "Android is Upgrading..." on the first reboot ?
Appreciate your response..
Click to expand...
Click to collapse
idk Bro I will get device till 21st April
But as per my experience Only "Cyanogen" Boot screen
Ha\/0c said:
Just brought the device yesterday..and it got update yesterday itself.. (got it delivered today )
and just about to flash lollipop.
But 1 req: plz..
plz confirm the
md5 hash : d8b8fdbfe0796b0f8f2f370526a5841a
Click to expand...
Click to collapse
Idk Bro device Will Deliver Till 21st April :angel:
Rohit Gupta @123 said:
INSTALL OFFICIAL CM12 TO YOUR YU YUREKAYu Yureka has got the official Cyanogenmod 12S sealed and signed by Google which is being rolled out today! Few users has already got the update and we have captured the OTA link , that means now we don't have to wait for the OTA update. We can also install them manually and can enjoy the sweeter taste of Lollipop.
Hey guys,
Here's the official link of CM12S OTA package for Yu Yureka:
http://builds.cyngn.com/cyanogen-os...deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
Will update this post with mirrors shortly. Happy Flashing!
Special Thanks To Caesar & Chitu98
WARNING!!!!
ONCE YOU HAVE UPGRADED TO LOLLIPOP (cm-12.0) THEN DO NOT FLASH THE KITKAT (cm-11.0) IMAGES AS IT MAY LEAD TO THE DEVICE GETTING BRICKED!
Stock Recovery:
DevHost - http://d-h.st/FSH (provided by tartutic07[/B]
NOTE: We are not responsible to any damage to your device. Do at your own risk!
Click to expand...
Click to collapse
Can stock recovery be flashed through Odin?
EDIT: Can you also provide a mirror for stock recovery? I'm having issues
Im on custom ROM crdroid and cwm recovery,
So I just need to flash stock recovery and then flash the ota?
Or do I need to flash stock ROM too?
Even I'm on CrDroid ROM with a custom kernel. Can anyone advice if I can flash the update by having stock recovery installed via flashify?
Or do I need the stock kernel and stock Rom?
If yes can anyone help me with the links for the same?
Sent from my AO5510 using XDA Free mobile app
I am facing issues after installation of the rom. Kindly help. Please look at this link
http://forum.xda-developers.com/yureka/general/issues-installing-cm-12s-update-t3085534
Kiranb212 said:
Just a quick question... I upgraded to Android L via manual update... do we get "Cyanogen" Boot screen & "Android is Upgrading..." on the first reboot ?
Appreciate your response..
Click to expand...
Click to collapse
yes that;s what you get.
---------- Post added at 07:46 AM ---------- Previous post was at 07:41 AM ----------
Kiranb212 said:
Just a quick question... I upgraded to Android L via manual update... do we get "Cyanogen" Boot screen & "Android is Upgrading..." on the first reboot ?
Appreciate your response..
Click to expand...
Click to collapse
sal_rc said:
Im on custom ROM crdroid and cwm recovery,
So I just need to flash stock recovery and then flash the ota?
Or do I need to flash stock ROM too?
Click to expand...
Click to collapse
you need to flash the stock rom as well as stock recovery.
vu2pmc said:
Even I'm on CrDroid ROM with a custom kernel. Can anyone advice if I can flash the update by having stock recovery installed via flashify?
Or do I need the stock kernel and stock Rom?
If yes can anyone help me with the links for the same?
Sent from my AO5510 using XDA Free mobile app
Click to expand...
Click to collapse
you need to flash both stock rom as well as recovery.
link : http://www.thetechnotriad.com/393/how-to-unbrick-yu-yureka/
Follow the steps properly. and then install lollipop update.
What about the Kernel? Do I need that also changed to stock?
Sent from my AO5510 using XDA Free mobile app
vu2pmc said:
What about the Kernel? Do I need that also changed to stock?
Click to expand...
Click to collapse
when we flash stock rom, don't we get everything stock?
sal_rc said:
Im on custom ROM crdroid and cwm recovery,
So I just need to flash stock recovery and then flash the ota?
Or do I need to flash stock ROM too?
Click to expand...
Click to collapse
Flash Stock Rom & Stock Recovery Then Flash Lollipop OTA ZIP
id74em8 said:
Can stock recovery be flashed through Odin?
EDIT: Can you also provide a mirror for stock recovery? I'm having issues
Click to expand...
Click to collapse
I Had Uploaded It In Dev Host BRO See In OP
Related
Hello, actually on my P6 I have Omni Rom 4.4.2 (this one http://forum.xda-developers.com/showthread.php?t=2673839 )
I have some hardware problems with my device so I want to send it in WARRANTY, so now I need to return on stock firmware and revert to a stock boot+recovery+rom
Is this the right way to REVERT all to stock? :
1. I need a boot.img (a stock one, I think B118, it is a good rom for warranty?) <---- where to find it
2. I need a recovery.img (a stock one, B118? ) <---- found this (http://www.androidfilehost.com/?fid=23252070760973625 )
3. I downloaded a stock rom B118 on my SD (dload/update.app)
4. Have I to UNROOT my device?
Thank you very much
http://forum.xda-developers.com/showthread.php?t=2709607 check this.
FAIL to revert
tileeq said:
http://forum.xda-developers.com/showthread.php?t=2709607 check this.
Click to expand...
Click to collapse
Very fast & usefull installer, but I can't to revert to a stock firmware.
Now I've installed a Custom CyanogenMod unofficial on TWRP, no problems with zip firmware update or downgrade, but actually impossibile to install an official update/downgrade (update.app)
Dowloaded a stock B118
inserted it on SD in dload folder
rebooting (vol+)+(vol-)+power
initially has started the flashing process, but after a second appair FAIL...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
any suggestion?
marekaq said:
Very fast & usefull installer, but I can't to revert to a stock firmware.
Now I've installed a Custom CyanogenMod unofficial on TWRP, no problems with zip firmware update or downgrade, but actually impossibile to install an official update/downgrade (update.app)
Dowloaded a stock B118
inserted it on SD in dload folder
rebooting (vol+)+(vol-)+power
initially has started the flashing process, but after a second appair FAIL...
any suggestion?
Click to expand...
Click to collapse
You need to flash stock recovery image to be able to install stock ROM by dload method.
marekaq said:
Very fast & usefull installer, but I can't to revert to a stock firmware.
Now I've installed a Custom CyanogenMod unofficial on TWRP, no problems with zip firmware update or downgrade, but actually impossibile to install an official update/downgrade (update.app)
Dowloaded a stock B118
inserted it on SD in dload folder
rebooting (vol+)+(vol-)+power
initially has started the flashing process, but after a second appair FAIL...
any suggestion?
Click to expand...
Click to collapse
To reverd from KitKat to Jelly Bean first install that: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4 via dload folder, after that install 4.2.2 stock firmware again via dload folder. That is a middle step, without it you can't downgrade from KitKat to Jelly Bean.
Mr.DonDroid said:
You need to flash stock recovery image to be able to install stock ROM by dload method.
Click to expand...
Click to collapse
of course I did it
Try downgrading to B132 instead of B118
Sent from my P6-U06 using xda app-developers app
it worked
alex.79 said:
To reverd from KitKat to Jelly Bean first install that: https://mega.co.nz/#!9oEHUTiR!uVKEq6PYefO-p4_kJcJpHw2luWZT8QZ5yrnedx4rug4 via dload folder, after that install 4.2.2 stock firmware again via dload folder. That is a middle step, without it you can't downgrade from KitKat to Jelly Bean.
Click to expand...
Click to collapse
Alex you are the BEST.
It worked very well.
So thank you very much for helping.
Cheers
tileeq said:
Try downgrading to B132 instead of B118
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
good idea, but I tried it before and nothing... it worked updating this one: P6联通 EMUI2.0 回退中转包
Can alex.79 please post the last link again, the file doesnt exist on that cloud server anymore or if you arent able to please let me know what file it is that you suggested to marekaq, this will be highly appreciated.
link again!
please post that mega.conz link again ! please
Updated mega.co.nz link
Hi,
To all who tries to download the unavailable mega.co.nz-download, please try this link:
h**p://dl.vmall.com/c01l4l4a2y (please replace the ** with tt ... due low posts I cannot post outside links)
It's a very slow server. The file (117MB) took about 10-15 minutes to download, but it's the same file as the mega.co.nz-link.
asap
marekaq said:
Alex you are the BEST.
It worked very well.
So thank you very much for helping.
Cheers
Click to expand...
Click to collapse
how did you get it to work
Huawei toolkit
Use huawei toolkit
Themurk said:
Use huawei toolkit
Click to expand...
Click to collapse
please explain.
i Need to revert to send it back too.
thanks a lot!
i offer 5 euro via paypal for clear instructions how to revert recovery and go back to stock B135 (with links to recovery - b135 i got myself)
please !
polykoma said:
i offer 5 euro via paypal for clear instructions how to revert recovery and go back to stock B135 (with links to recovery - b135 i got myself)
please !
Click to expand...
Click to collapse
What is the current situation on the phone? Stock or custom, jellybean or kitkat?
Sent from my SM-G850F
[/COLOR]
tileeq said:
What is the current situation on the phone? Stock or custom, jellybean or kitkat?
Sent from my SM-G850F
Click to expand...
Click to collapse
Hi
P6-U06
Current state:
Cyanogenmod 10.1 unofficial
Andro 4.2.2
Kernel 3.0.8
I'm not like a super noob, I just dont have the time to investigate and try&error due high workload in my real life
Thank you so much
Since its not upgraded to kitkat it wont be too hard to revert back. You need stock recovery flashed and one of the last jellybean stock roms (my suggestion is B132). If you dont have a link to download stock rom just search the web for huawei p6 B132 or whatever you would like to revert to. As for the recovery you can extract it from the stock rom file with this tool
http://forum.xda-developers.com/showthread.php?t=2433454
Read the instructions and extract the recovery only nothing else is needed.
Connect the phone in fastboot mode with pc and flash the recovery with cmd. Tutorials on using adb&fastboot are easily found on internet. Before flashing it make sure you have a sdcard with dload folder on it containing update.app file from the stock rom. After flashing enter recovery and wait for it to finish. That would be about it. Ask anything that you dont find easy or understandable to do.
Sent from my SM-G850F
tileeq said:
Since its not upgraded to kitkat it wont be too hard to revert back. You need stock recovery flashed and one of the last jellybean stock roms (my suggestion is B132). If you dont have a link to download stock rom just search the web for huawei p6 B132 or whatever you would like to revert to. As for the recovery you can extract it from the stock rom file with this tool
http://forum.xda-developers.com/showthread.php?t=2433454
Read the instructions and extract the recovery only nothing else is needed.
Connect the phone in fastboot mode with pc and flash the recovery with cmd. Tutorials on using adb&fastboot are easily found on internet. Before flashing it make sure you have a sdcard with dload folder on it containing update.app file from the stock rom. After flashing enter recovery and wait for it to finish. That would be about it. Ask anything that you dont find easy or understandable to do.
Sent from my SM-G850F
Click to expand...
Click to collapse
10000x Thank man.
Worked perfectly on first try. Now Im back to B119!
<3 <3 <3 2 u
Q&A for [CWM][08.03.14]Galaxy Fame - 6.0.4.6 [FINAL]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
clockworkmod , custom recovery GT S6790
corsicanu said:
CWM 6.0.4.6 - Final
Changelog:
-removed some unused lines
-removed of "No" when you need to confirm actions
-home (middle) button now it can be used as 'Select'
-abandoned support for Mount Mass Storage
-added black background
//make backups to external storage always because wiping data may wipe /data/media (internal) too and you will lose your backup!
What is working:
-as before, everything, without Mass storage.
How to:
If you have stock recovery see this:
If already having a previous version of cwm installed, flash the zip as usual and reboot recovery.
Downloads:
Flashable zip - CWM - 6.0.4.6
Odin package - CWM - 6.0.4.6
Odin v3.07
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
hi i wouldnt know if this is wherre i can post this but i reeeeeeaaaalllllly need help. i wanted to get a custom recovery so much i downloaded and flashed cwm for galaxy fame. i am using galaxy fame lite GT S6790 XXANA1 running jellybean 4.1.2 . I flashed using odin 3.07 and my device booted fine but it wont enter recovery (clockworkmod) now i cant even enter recovery because stock recovery is gone. this was an honest mistake since i thought they are the same architecture and all it would work and i was of the view that it would also root the phone during the flashing process now i have found a way to root and im rooted but i cannot factory reset my phone because i dont have a recovery . when i get into recovery it is a black screen device reboots and i see samsung logo. pleeeeeeeeeeeeeeaaaaaase help me to get stock recovery back :crying::crying::crying::crying::crying:
Thagud said:
hi i wouldnt know if this is wherre i can post this but i reeeeeeaaaalllllly need help. i wanted to get a custom recovery so much i downloaded and flashed cwm for galaxy fame. i am using galaxy fame lite GT S6790 XXANA1 running jellybean 4.1.2 . I flashed using odin 3.07 and my device booted fine but it wont enter recovery (clockworkmod) now i cant even enter recovery because stock recovery is gone. this was an honest mistake since i thought they are the same architecture and all it would work and i was of the view that it would also root the phone during the flashing process now i have found a way to root and im rooted but i cannot factory reset my phone because i dont have a recovery . when i get into recovery it is a black screen device reboots and i see samsung logo. pleeeeeeeeeeeeeeaaaaaase help me to get stock recovery back :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/ - Make a free account and download stock firmware for your country or region. Flash it under pda in odin 3.07 and you are good to go... Note that you will lose everything from your phone so be carefull and make a backup of important things first. And next time please read 2-3 times before flashing! You are in the fame section not fame lite.. And if you make a simple comparison between the devices you will see that is more different than you think... Good luck! And P.S. - you are aware that you lost your warranty?
corsicanu said:
The recovery is compatible with all versions of Galaxy Fame - s6810 / s6810P / s6810L / s6810E / s6812 and is the only one fully working!
Click to expand...
Click to collapse
Help with CWM for Galaxy fame lite
Sir @corsicanu90, can you make us a CWM for Galaxy fame lite?, i have recovery.fstab and recovery.img file to upload...please i cant Linux to build my own port for that, and i very frustated searching on the web for that
angelus19792004 said:
Sir @corsicanu90, can you make us a CWM for Galaxy fame lite?, i have recovery.fstab and recovery.img file to upload...please i cant Linux to build my own port for that, and i very frustated searching on the web for that
Click to expand...
Click to collapse
I don't have much time now with all my work and others.. I need more things than recovery.fstab and recovery.img.. Those i can get by myself downloading stock fw from the internet. First thing I need you to be rooted. Also i need at least 2 testers since i don't have the device.. I will look and see what else i need. Some data about cpu, architecture, ram, partition sizes.. I'll contact you when i'll manage to get some free time. Cheers!
Sent from my GT-I9300 using Tapatalk
corsicanu said:
I don't have much time now with all my work and others.. I need more things than recovery.fstab and recovery.img.. Those i can get by myself downloading stock fw from the internet. First thing I need you to be rooted. Also i need at least 2 testers since i don't have the device.. I will look and see what else i need. Some data about cpu, architecture, ram, partition sizes.. I'll contact you when i'll manage to get some free time. Cheers!
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thx so much!
clockworkmod , custom recovery GT S6790
angelus19792004 said:
Sir @corsicanu90, can you make us a CWM for Galaxy fame lite?, i have recovery.fstab and recovery.img file to upload...please i cant Linux to build my own port for that, and i very frustated searching on the web for that
Click to expand...
Click to collapse
helo brother can you please upload your stock recovery im trying to restore my recovery without flashing the rom
Does this work with S6810B?
---------- Post added at 10:33 PM ---------- Previous post was at 10:22 PM ----------
Does this work with S6810B?
Should work.. Try and report. Cheers!
Sent from my GT-I9300 using Tapatalk
Galaxy Fame S6810B
Works perfect !!!
Thank you.
It's perfect! But I have a problem... The bluetooth not working altogether. I tried to connect my headphones and not let me, appears to me "Could not connect to Nokia BH-503 because the password or PIN is incorrect".
It can be? Obviously, the headphones do not have a password or PIN.
Please help me!
P.S: Sorry for my bad English...
Can someone send me a full guide of putting this rom on my samsung fame pls ?
Cwm for my galaxy fame lite
corsicanu said:
I don't have much time now with all my work and others.. I need more things than recovery.fstab and recovery.img.. Those i can get by myself downloading stock fw from the internet. First thing I need you to be rooted. Also i need at least 2 testers since i don't have the device.. I will look and see what else i need. Some data about cpu, architecture, ram, partition sizes.. I'll contact you when i'll manage to get some free time. Cheers!
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Hola me llamo dante vivo en argentina hay algun recovery o cwm personalizado para el s6790L? Y si no lo hay tu no puedes crear uno que necesitarias para hacerlo?
Bootloader
Must I have unlocked bootloader???I have GT-S6810P with root,locked bootloader,stock recovery,rom and kernel.I want flash racovery with odin!!!
eimaiogamiastismanassoy said:
Must I have unlocked bootloader???I have GT-S6810P with root,locked bootloader,stock recovery,rom and kernel.I want flash racovery with odin!!!
Click to expand...
Click to collapse
I never of locked bootloader on Galaxy Fame.. Did you tried to flash it and didn't worked?
Sent from my GT-N7100 using Tapatalk
i flash recovery with odin,i boot on it and when i boot on system and re-boot on recovery i boot on Stock recovery!!!!!!!!!!!!!!!!!!I cant boot on cwm!!!
eimaiogamiastismanassoy said:
i flash recovery with odin,i boot on it and when i boot on system and re-boot on recovery i boot on Stock recovery!!!!!!!!!!!!!!!!!!I cant boot on cwm!!!
Click to expand...
Click to collapse
Did you read the first or third post in the cwm thread?
corsicanu said:
If you have problems with reverting to stock recovery, push Aroma File Manager into sdcard, flash via odin cwm 6.0.5.1, reboot into recovery and flash AromaFM as normal zip.. After flashing, find and delete reboot-from-recovery.p, located into /system folder.
Click to expand...
Click to collapse
corsicanu said:
To bypass flashing stock recovery:
LondonMpee said:
If you have root from flashing CWM then you can delete (or move it out and keep as a trophy!) a file from /system folder called reboot-from-recovery.p before you try flashing CWM again.
This seems to be the thing that keeps restoring stock recovery over CWM, I checked again last night and it's still CWM 6.0.4.6 :good:
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Sent from my GT-N7100 using Tapatalk
corsicanu said:
Did you read the first or third post in the cwm thread?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
ohhh.sorry i will try!!!
corsicanu said:
Did you read the first or third post in the cwm thread?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Aroma FM find /system folder with inside only a bin folder which is without other files inside!!!Help i need that recovery!!!Sorry but your and wulsic work is the BEST you can find for Fame!!!I find only a recovery-from-boot.p file!!I will try to delete it!!!
EDIT:IT WORKS!!!!THANK YOU VERY MUCH!!!
eimaiogamiastismanassoy said:
Aroma FM find /system folder with inside only a bin folder which is without other files inside!!!Help i need that recovery!!!Sorry but your and wulsic work is the BEST you can find for Fame!!!I find only a recovery-from-boot.p file!!I will try to delete it!!!
EDIT:IT WORKS!!!!THANK YOU VERY MUCH!!!
Click to expand...
Click to collapse
bro, are you choose PA/PDA at Odin ,when at pc ?
pr yeah,if you are rooted ,try to delete that file bro with ES File manager / Root explorer,or any other root explorer
I packaged up the newest system version for the xt1063 as a flashable zip.
You can flash it using TWRP.
this flashes the newest system and boot image:
22.21.28-titan_retuglb.zip //down
flash via custom recovery
for completeness the corresponding modem and recovery for this system version.
(This doesnt add any functionality, but allows you to install future ota's)
xt1063-22.21.28-modem.zip flash via custom recovery
xt1063-22.21.28-recovery.img flash via fastboot
old downloads
22.21.25-titan_retuglb // down
xt1063-22.21.25-modem
22.21.16.titan_retuglb // down
Edit:
Seems like the files are gone from mega.
I have kind of moved on from this project and i dont have backups.
But if anyone has the files still please send them to me, so my work is not lost.
KennyWuLee said:
I packaged up the newest system version for the xt1063 as a flashable zip.
System version is 22.21.16.titan_retuglb so it includes the new ota on top of the lollipop update.
You can flash it using TWRP.
The rom will overwrite the recovery with the stock recovery on the first boot.
Download
Click to expand...
Click to collapse
Can this be flashed on a xt1064? I have a consumer cellular branded xt1064 which is flashed to the first 5.0 ota. Now want to get the second 5.0 ota flashed.
Trekker56 said:
Can this be flashed on a xt1064? I have a consumer cellular branded xt1064 which is flashed to the first 5.0 ota. Now want to get the second 5.0 ota flashed.
Click to expand...
Click to collapse
If you have a backup you can try.
The rom is not messing with the modem so it could work.
Don't have a back up ?. If anyone successfully flashes this to xt1064, do post it here please.
___________________
Sent from my BN NookHD+ using Tapatalk Pro.
Trekker56 said:
Don't have a back up ?. If anyone successfully flashes this to xt1064, do post it here please.
___________________
Sent from my BN NookHD+ using Tapatalk Pro.
Click to expand...
Click to collapse
You need TWRP to flash this zip Lol, so once you flash TWRP, you can make a backup in TWRP before flashing this zip. If flashing the zip doesn't work then you can restore your backup using TWRP.
Trekker56 said:
Don't have a back up ?. If anyone successfully flashes this to xt1064, do post it here please.
___________________
Sent from my BN NookHD+ using Tapatalk Pro.
Click to expand...
Click to collapse
I just flashed it on my x1064 and it works. Just need to figure out how to root this so I can restore my backup from titanium.
I tweaked a few things for XT1064 along side
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dialer > Google Dialer (goodbye kitkat icon, hello lollipop icon)
Messenging > Google Messenger
Download Here
You don't have to Wipe data. I flashed without wiping data and everything seems to be working fine.
Successful flash. Everything works. Using XT1063.
Root does not work
Rooting breaks wifi
could be something to do with boot.img
re-patch of boot.img required
awsome thanks for this zip
KennyWuLee said:
I packaged up the newest system version for the xt1063 as a flashable zip.
System version is 22.21.16.titan_retuglb so it includes the new ota on top of the lollipop update.
You can flash it using TWRP.
The rom will overwrite the recovery with the stock recovery on the first boot.
Download
Click to expand...
Click to collapse
Okay, just to clarify - I am on Kit-Kat 4.4.4 unlocked and rooted with TWRP 2.8.0.1 as recovery. I can download this and flash it directly from TWRP?
This works great, flashed on my 1064. via TWRP then reflashed TWRP after- perfect
But we need a full working root method!!! :/
pastorbob62 said:
Okay, just to clarify - I am on Kit-Kat 4.4.4 unlocked and rooted with TWRP 2.8.0.1 as recovery. I can download this and flash it directly from TWRP?
Click to expand...
Click to collapse
Yeah that should work.
Maybe you will need to do a factory reset.
KennyWuLee said:
I packaged up the newest system version for the xt1063 as a flashable zip.
System version is 22.21.16.titan_retuglb so it includes the new ota on top of the lollipop update.
You can flash it using TWRP.
The rom will overwrite the recovery with the stock recovery on the first boot.
Download
Click to expand...
Click to collapse
Fantastic tool! I was able to install Lollipop, reinstall TWRP, and get root with SuperSU-v2.37. I was not interested in upgrading to Lollipop but you made it very easy to do.
Great job! :good:
Am unable to flash TWRP recovery on my XT1064 that already has the first 5.0 OTA installed (consumer cellular version flashed to retail rom). I really want t o install the second 5.0 OTA, the memory management bug is very bad.
carstenheuer said:
But we need a full working root method!!! :/
Click to expand...
Click to collapse
Not sure what you mean by "full working root method". I used Super SU-ver2.37.zip, installed it from TWRP and I have full root. All of my root apps work fine and I have root explorer access from ES File Manager. Can't get any fuller access than that.
---------- Post added at 04:55 PM ---------- Previous post was at 04:26 PM ----------
Trekker56 said:
Am unable to flash TWRP recovery on my XT1064 that already has the first 5.0 OTA installed (consumer cellular version flashed to retail rom). I really want t o install the second 5.0 OTA, the memory management bug is very bad.
Click to expand...
Click to collapse
Is your boot loader unlocked? Can't flash a custom ROM until it is. Not sure if that is possible from Lollipop. You may have to downgrade to Kit-Kat, unlock the boot loader, flash TWRP then use this zip to install the latest Lollipop.
I was finally able to flash TWRP recovery. Flashing the ROM now. how long is it supposed to take? It's been close to 10 mins and still flashing.
Edit:
Finally flashed!! Thanks for all the help guys!
pastorbob62 said:
Not sure what you mean by "full working root method". I used Super SU-ver2.37.zip, installed it from TWRP and I have full root. All of my root apps work fine and I have root explorer access from ES File Manager. Can't get any fuller access than that.
---------- Post added at 04:55 PM ---------- Previous post was at 04:26 PM ----------
Is your boot loader unlocked? Can't flash a custom ROM until it is. Not sure if that is possible from Lollipop. You may have to downgrade to Kit-Kat, unlock the boot loader, flash TWRP then use this zip to install the latest Lollipop.
Click to expand...
Click to collapse
is your phone a 1064 or 1063...I read that root breaks wifi? can you please confirm?
I'm trying to install on XT1064 , anyone experiencing any issue?
I know it is possible to install, but any compatible issue will exist in theory?
---------- Post added at 06:43 AM ---------- Previous post was at 06:40 AM ----------
OTA 22.21.16 For XT1064
Could you help us make it flashable? if it is not too much trouble. Thanks
---------- Post added at 06:44 AM ---------- Previous post was at 06:43 AM ----------
OTA 22.21.16 For XT1064
Could you help us make it flashable? if it is not too much trouble. Thanks
As it seems some users want a full stock lollipop with no modding, well here you go.
What is this rom:
Full stock with stagefright bug fix
Stock kernel
Knox removed
Root & busybox
ExternalSD read/write fix
Aroma for region selection.
Deodexed = Xposed framework (for samsung lollipop) will work on this rom
Installation:
You need to be on a custom recovery
You need to be on the Lollipop bootloader : Flash this from Odin in download mode (all the stuff you need is here)
Now install your rom using a custom recovery.
P900-FULL_STOCK-Root-busybox.zip
Is this a deodexed rom?
DarkManX4lf said:
Is this a deodexed rom?
Click to expand...
Click to collapse
Yes sorry, forgot to mention it.
Thank you very much for this. I've been hesitant to try anything with so many mods but I can't wait to test this!
Thanks alot for this...this tablet gets NOOOOO LOVE...like my Note Edge...theres like 2 whole Roms out! Yeaaaa
---------- Post added at 02:59 PM ---------- Previous post was at 02:59 PM ----------
Thanks soooo much. ..I need this badly
---------- Post added at 03:00 PM ---------- Previous post was at 02:59 PM ----------
Civato...you are the man bro
Installed this ROM last night and spent the day setting my tablet up. I can honestly say that this is the smoothest and most responsive ROM I have tried for this tablet. Whatever you did in this ROM is perfect!!!
Many thanks for the rom mate @civato. You're always an help:good:
I will be trying this Lollipop for the first time on my note........
Cheers
Is there a way to install the bootloader from TWRP? I don't know when I'll be able to get my hands on a PC so I can't use Odin right now.
I've managed to get my hands on a PC so I can use ODIN now, but I do have a few questions:
1.) If I want or need to go back to a stock version will I need to replace the bootloader file that is being provided? If so where can I find the proper bootloader fIles?
2.) What are the correct steps to installing the new bootloader and ROM? I have TWRP installed and have made a full backup. Do I wipe everything first then shutdown or can I just boot into download mode from within TWRP then install the bootloader? After installing the bootloader do I reboot straight into recovery and then install the ROM? What options need to be selected in this version of ODIN?
3.) Out of curiosity where does the bootloader file that civato is providing come from? Is this something that was made especially for this modified ROM?
I'm sorry to ask all these noobie questions. I did search all over the place looking for answers, but most everything I found tended to be confusing and contradictory not to mention specific to other devices. I do appreciate any help that I can get. TIA
Nobody?
Bootloader is usually pulled from stock .tar file or any mod who made it for specific use, to go back to stock just flash stock .tar with odin it should overwrite existing bootloader as far as i know.
Sent from my LG-D800 using XDA Free mobile app
Can we get an updated version with newer base? BOF1 is the one with bluetooth keyboard doesnt work with. Thanks
FlyingHorseGA said:
I've managed to get my hands on a PC so I can use ODIN now, but I do have a few questions:
Out of curiosity where does the bootloader file that civato is providing come from? Is this something that was made especially for this modified ROM?
Click to expand...
Click to collapse
Bootloader is extracted from the original samsung firmware, you can only install a bootloader using Odin.
ReyStunner said:
Can we get an updated version with newer base? BOF1 is the one with bluetooth keyboard doesnt work with. Thanks
Click to expand...
Click to collapse
That is a kernel problem. Use a custom kernel.
civato said:
That is a kernel problem. Use a custom kernel.
Click to expand...
Click to collapse
I kinda figured that but seeing this is a stock untouched deodexed rom it would defeat the purpose for those who want to remain as stock as possible but have option to install xposed with deodexed stock rom.
Can someone give a link or version of xposed that works. I tried mutiple versions from arter thread but xposed app says version not compitable. Any help?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is with version xposed-v71-sdk21-arm-arter97-V6-exynos.zip
Do I need a custom kernel?
pradeepd said:
Can someone give a link or version of xposed that works. I tried mutiple versions from arter thread but xposed app says version not compitable. Any help?
View attachment 3511408
This is with version xposed-v71-sdk21-arm-arter97-V6-exynos.zip
Do I need a custom kernel?
Click to expand...
Click to collapse
I don't think you need a custom kernel. I havent installed this rom yet but did you use the right xposed installer ? There is a link to it in arter's thread.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
Hi
I'm on a p900 I was on an official 5.02 stock however, I rooted it and now got superuser working. Now do I still need to install the bootloader?. Plus if I want to get back to stock how would I remove the bootloader?
rirawin said:
Hi
I'm on a p900 I was on an official 5.02 stock however, I rooted it and now got superuser working. Now do I still need to install the bootloader?. Plus if I want to get back to stock how would I remove the bootloader?
Click to expand...
Click to collapse
No, the bootloader warning was for people who are on Kitkat wanting to move to lollipop.
In your case to go back to unrooted you can either go into the supersu app and select full unroot or better yet connect the tablet to a pc running kies and do a full factory reset.
Sent from my SM-P900 using Tapatalk
Havent rooted my note pro yet but wanted to check this out and says that I need a custom recovery, does anyone know of any good tutorial for rooting my note 12 smp900 with lollipop 5.0.2 , that way I could install a custom recovery
Valholy said:
Havent rooted my note pro yet but wanted to check this out and says that I need a custom recovery, does anyone know of any good tutorial for rooting my note 12 smp900 with lollipop 5.0.2 , that way I could install a custom recovery
Click to expand...
Click to collapse
Like this?
http://forum.xda-developers.com/showthread.php?t=3154362
Sent from my SM-P900 using Tapatalk
Mainly posting this here for any devs that want it.
I have removed the check for stock recovery as well as added a build fingerprint check for TWRP to allow this update to take without Stock recovery.
This is the update.zip that T-Mobile pushed out starting today (10/05/15). If you are not on D85120E stock (might work with root, I have not checked) do not flash this as it should fail but it's your choice to risk it.
Download MD5: 5858ab8aa2aedce3e74051ae365596b4
found a link to a KDZ here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KAsp3rd said:
Mainly posting this here for any devs that want it.
I have removed the check for stock recovery as well as added a build fingerprint check for TWRP to allow this update to take without Stock recovery.
This is the update.zip that T-Mobile pushed out starting today (10/05/15). If you are not on D85120E stock (might work with root, I have not checked) do not flash this as it should fail but it's your choice to risk it.
Download MD5: 5858ab8aa2aedce3e74051ae365596b4
found a link to a KDZ here
Click to expand...
Click to collapse
Mind me asking what updates/upgrades were made from E to G?
---------- Post added at 09:28 PM ---------- Previous post was at 09:23 PM ----------
yanowman said:
Mind me asking what updates/upgrades were made from E to G?
Click to expand...
Click to collapse
How would I just jump from either stock rooted 20e OR stock SR5.1.... CAN I JUST flash in twrp or...... Need some instructions for this update plzz
Looks like this is to patch Stagefright.
https://support.t-mobile.com/docs/DOC-11935
yanowman said:
Mind me asking what updates/upgrades were made from E to G?
---------- Post added at 09:28 PM ---------- Previous post was at 09:23 PM ----------
How would I just jump from either stock rooted 20e OR stock SR5.1.... CAN I JUST flash in twrp or...... Need some instructions for this update plzz
Click to expand...
Click to collapse
I would not attempt to flash this over any custom rom. With stock it is as simple as flashing in twrp. However as I said I did not test with root on 20e
Root 20G?
KAsp3rd said:
I would not attempt to flash this over any custom rom. With stock it is as simple as flashing in twrp. However as I said I did not test with root on 20e
Click to expand...
Click to collapse
How did you test it than. Coming from 20e without root? How does one flash it without root.... I'm guessing this is a dumb question however
yanowman said:
How did you test it than. Coming from 20e without root? How does one flash it without root.... I'm guessing this is a dumb question however
Click to expand...
Click to collapse
I had a stock 20e build without root however I did have TWRP. Which is why I removed the recovery check
Sent from my LG-D851 using Tapatalk
KAsp3rd said:
I had a stock 20e build without root however I did have TWRP. Which is why I removed the recovery check
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
So if i flash this stock rom...
https://www.androidfilehost.com/?w=...9fd46fa47b9c0a72d7ee44cb0635410d991e6dfa7fd52
Without supersu
Than boot into twrp and flash the zip it should work?
Just tried on sr and it failed
wooooo
Confirmed working for an idiot like me
Yes!!!! With new update my wificalling works again.
Sent from my LG-D851 using XDA Free mobile app
Just received this OTA. Dumb question but how can I update with my rooted, but stock ROM? I'm guessing I simply can't accept the OTA...
yanowman said:
Confirmed working for an idiot like me
Click to expand...
Click to collapse
how flash 20G?
yanowman said:
Confirmed working for an idiot like me
Click to expand...
Click to collapse
So, how long should it take to boot after flashing this? My phone is stuck on the white T-Mobile boot screen. I think its been sitting there for at least 15 minutes.
EDIT: I gave up waiting. I reflashed the stock rom over this and now I'm waiting though the optimizing process. Why didn't I make a backup first??
EDIT2: I redownloaded it, made a backup and tried to flash it again. This time we're good. Optimizing apps as we speak.
Does anybody know if this fixes the "Settings has stopped" error when going to the tethering menu in Settings?
So I need some clarification please and have a couple of questions. I have Tmo G3 (D851) running stock 20e, but it is rooted. I also have TWRP. Can I just flash this update.zip using TWRP and all will be fine or not? I of course will do a full backup before I start, but wonder about data. Has anyone learned whether this works on rooted devices yet? I think I am already Stagefright protected because I run Textra for SMS and MMS (I do NOT run stock messaging), but should I upgrade to this? I look forward to some expert opinions. Thanks to all.
hodgestl said:
So I need some clarification please and have a couple of questions. I have Tmo G3 (D851) running stock 20e, but it is rooted. I also have TWRP. Can I just flash this update.zip using TWRP and all will be fine or not? I of course will do a full backup before I start, but wonder about data. Has anyone learned whether this works on rooted devices yet? I think I am already Stagefright protected because I run Textra for SMS and MMS (I do NOT run stock messaging), but should I upgrade to this? I look forward to some expert opinions. Thanks to all.
Click to expand...
Click to collapse
I had unrooted (through supersu script) in order to setup Android pay. I would recommend you do the same, simply because this has the root script at the end of it anyhow...
So, unroot (setup Android Pay if you care to), flash, reroot...move on with life :good:
mjfrank said:
I had unrooted (through supersu script) in order to setup Android pay. I would recommend you do the same, simply because this has the root script at the end of it anyhow...
So, unroot (setup Android Pay if you care to), flash, reroot...move on with life :good:
Click to expand...
Click to collapse
Did all your data stay intact? After the update I assume you wiped cache and Dalvik? Thanks for your answers.
hodgestl said:
Did all your data stay intact? After the update I assume you wiped cache and Dalvik? Thanks for your answers.
Click to expand...
Click to collapse
No wipes necessary ('dirty flash'). Data stays intact. It will optimize all your apps on initial boot though.
mjfrank said:
No wipes necessary ('dirty flash'). Data stays intact. It will optimize all your apps on initial boot though.
Click to expand...
Click to collapse
Thanks for the reply. I guess I will do a full TWRP backup and move forward. Thanks again
Running rooted stock 5.0.1 20E. I've disabled supersu and booted back into TWRP to flash and I'm getting this error when I try to flash the zip:
"Package expects build fingerprint of lge/g3_tmo_us/g3:5.0.1/LRX21Y/151451134d07b:user/release-keys or lge/g3_tmo_us/g3:5.0.1/LRX21Y/15227151285fc:user/release-keys; this device has LG/omni-d851/d851:4.4.4/KTU84P/2:eng/test-keys."
Not familiar enough with the file system to know exactly what that is, but I'm guessing some file on my device is reporting I'm still on 4.4.4? Could that be a kernel issue? I did at one point have a custom kernel, but I went back to stock after that and re-rooted? Just hoping to avoid a full wipe and redo...