Related
I find that Egrees freezes my Hermes on startup prob not straight after install but certainly after a couple of days. The most recent was after a few hours anyone else get this problem.
I am using PDA Corner V10
Anyone else found this ??
How many news feeds have you got?
When i used to use it if i had more than about 15 setup it would not only freeze up but the sd would corrupt because of the number of files just 1 channel needed.
Ive been working on a better method which ill finish for public use when i get the time.
st3v3 said:
How many news feeds have you got?
When i used to use it if i had more than about 15 setup it would not only freeze up but the sd would corrupt because of the number of files just 1 channel needed.
Ive been working on a better method which ill finish for public use when i get the time.
Click to expand...
Click to collapse
I had once folder setup for XBOX News and had 3 rss feeds in it one for game news, one for genereal xbox news and one for this weeks top news.
Funny you should mention about corrupt SD card I had a folder on mine with all my photos of my kids in it and another with setup files. When I had installed egress the photos had gone off the card. lucky I have a backup at work.
st3v3 said:
Ive been working on a better method which ill finish for public use when i get the time.
Click to expand...
Click to collapse
Sweet. Keep me in the know about that project. I am always in the mood for a new RSS reader, and there is a lot of room for improvement.
What RSS reader you using at the minute larsuck ?
skauk said:
What RSS reader you using at the minute larsuck ?
Click to expand...
Click to collapse
Using SPB Insight at the moment. Caching the full contents of the webpage really saves me a lot of money in the long run.
Does anybody know how you can add more frames to Camera on the HTC S620. Ive just come back from holiday and when I was using the Camera for a few "fun pix" I was greatly dissapointed in the lack of choice... basicaly it only had four week frames to choose from. So as soon as I got back I went about getting some more frames for my phone.... which I found, but my phone cant find them. Ive already tried adding a "Frames" folder to "My Documents" both on my phone and the storage card but yet the phone doesnt recognise any of the frames. Anybody else have this problem or even better can anyone else give me instruction on how to get it to work?
if anybody wants to know the Camera Software im using is the Camera for Smartphones version 4.52 that came pre installed with the phone as I dont want to be having more than one installed.
Just out of curiosity, what's a fun frame?
I knew the camera software on the Dash could do "effects" like sepia or negative. Never heard of the above.
I am in the same boat, what exactly is a "fun" frame just wondering?
oh, I assumed all the HTC S620's had all the same basic software I wasnt aware that Frames wernt available on all models.
What I mean by fun frames is like Magazine Covers which you select and take a picture with the frame on top of it.
The four that come with the BT ToGo version which I have is one which has two magazine covers on (you take two pictures and they get put into the frame), a cartoony spikey frame, one which looks like a notice board with two pictures on and finally a folding frame that holds three pictures...
the problem is that they are too specific like the memo on the notice board say "I love you" on one and "happy birthday" on the other... and the three way folding frame has love hearts on so it isnt like you can use them on any occasion.
...Picture Themes, thats what they are!!! Mabey I would have got more response if I posted under that.
Yea this is a ROM specific function. I remember having this on my T-Mobile SDA. You could have images pre drawn on the screen with a spot in the middle of the screen so yo could take a picture and use the template around the picture. For example: i had one that was a template of bubbles, snorkle and face mask, and if you got the picture aligned properly you could make it look liit the person you wrre taking a pic of was wearing the snorkel and mask and look like they were underwater. Kinda cool effect. I never noticed this feature on the DASH though.
edit: i just found the templates on WM 6.1 , but the four that are preloaded are pretty lame.
Aaaaahhhhh, never mind Ive found out how you do it...
the trouble was BT never provided me with a manual with the phone, its all done online in PDF format now. But after trawling through the PDF I eventually found out how to add extra frames -
Template Folder (Picture Theme only). By default, templates are
stored in the \My Documents\Templates folder on the device’s Main
Memory. If you transferred some templates to a storage card (via File
Explorer), set this option to Main + Card to specify that templates are
located in both the main memory and the storage card.
Click to expand...
Click to collapse
]
so thats where I was going wrong, I had read somewhere that the folder had to be called Frames... when that didnt work I renamed it Template when all along it should have been Templates.
Thanks anyway.
raptor78 said:
Aaaaahhhhh, never mind Ive found out how you do it...
the trouble was BT never provided me with a manual with the phone, its all done online in PDF format now. But after trawling through the PDF I eventually found out how to add extra frames -
]
so thats where I was going wrong, I had read somewhere that the folder had to be called Frames... when that didnt work I renamed it Template when all along it should have been Templates.
Thanks anyway.
Click to expand...
Click to collapse
do you have any templates to share?
Templates
Here you go.
Uh, I know it's not rocket science, but my upload keeps failing, I was trying to upload a few templates that I have for the DASH, Excalibur, etc.
Yeah I have found one or two good ones, I will try and post them sometime today
A couple of Wako Jacko's from BoSelecta (one just does the face while the other takes the face and background)
a Shrek and Fiona and a Wanted poster for now...
I think the frames from Sony Ericson phones should work (320x240) so im going to see if I can find them on my girlfriends phone and copy them onto my excalibur. The Sony Erricsons have some great fun frames and to be honest a really good camera built into their phones.
Does the frame need a special neme or extension?.
In Which folder need to be placed?
PS: Sorry my bad English
raptor78 said:
Yeah I have found one or two good ones, I will try and post them sometime today
A couple of Wako Jacko's from BoSelecta (one just does the face while the other takes the face and background)
a Shrek and Fiona and a Wanted poster for now...
I think the frames from Sony Ericson phones should work (320x240) so im going to see if I can find them on my girlfriends phone and copy them onto my excalibur. The Sony Erricsons have some great fun frames and to be honest a really good camera built into their phones.
Click to expand...
Click to collapse
Please share this gifs
HnAw said:
Please share this gifs
Click to expand...
Click to collapse
I hope you get an answer, since this thread has been inactive for more than a year and a half.
gmaniac2008 said:
I hope you get an answer, since this thread has been inactive for more than a year and a half.
Click to expand...
Click to collapse
aye i didnt see the date,any way i ll ul some free gifs
HnAw said:
aye i didnt see the date,any way i ll ul some free gifs
Click to expand...
Click to collapse
Thanks amigo!
This is a great forum, thank you every body!
I've tried changing the .watch or .face files to .zip and expanded them, but there aren't any images in them, just unix files.
How are you guys actually making watch faces? I want to give it a shot and make some for WatchMaker, but I'm lost on where to start.. dunno dimensions, how to animate, etc.
Any help would be appreciated!
R u 4 real?
Search
Google watchmaker is ur friend
Learn, we all had to
Tweetytek said:
R u 4 real?
Search
Google watchmaker is ur friend
Learn, we all had to
Click to expand...
Click to collapse
Hey, is there a way to make watchfaces on the pc??
I read about an application for windows but i just cant seem to find it ANYWHERE!.. Help me out if you know of something.
It works just like watchmaker but its on the pc..
I thi k making these on a computer would be super easy!
Thanks, cheers!!
I thought that's what people were doing! You're making them in WatchMaker??
Well, that explains why I couldn't figure it out. I have WatchMaker Pro, been tinkering with it, but I guess I didn't catch the feature where I can actually make the watch faces with it. I thought I had to import them.
In that case, my next question is how do I find the directories to save the images, etc? The path shows up in WatchMaker when I browse for files, but the actual path doesn't seem to exist on my phone. I've gone into the folder where they're supposed to be, but nothing's there.
edit: never mind, got it sorted
g.sahny said:
Hey, is there a way to make watchfaces on the pc??
I read about an application for windows but i just cant seem to find it ANYWHERE!.. Help me out if you know of something.
It works just like watchmaker but its on the pc..
I thi k making these on a computer would be super easy!
Thanks, cheers!!
Click to expand...
Click to collapse
the name of the software u are looking for is "Watchface Studio - Windows Watchface editing software"..
its freeware and you can download it from codeplex dot com
kloan said:
I thought that's what people were doing! You're making them in WatchMaker??
Well, that explains why I couldn't figure it out. I have WatchMaker Pro, been tinkering with it, but I guess I didn't catch the feature where I can actually make the watch faces with it. I thought I had to import them.
In that case, my next question is how do I find the directories to save the images, etc? The path shows up in WatchMaker when I browse for files, but the actual path doesn't seem to exist on my phone. I've gone into the folder where they're supposed to be, but nothing's there.
edit: never mind, got it sorted
Click to expand...
Click to collapse
I made a face on watchmaker but how can I share it? Can't figure out how to upload the face I can only get the pic.
Hello Everyone,
I made my 1st watch face today. It is not perfect, but still looks good. Hence wanted to share it.
Have got both watchmaker and facer files now. But henceforth will make for watchmaker only since it is a much better app than facer.
The zip files have both the versions in them, so extract and choose the correct version.
Thanks
Too bad it doesnt open in watchmaker
Sent from my HTC One_M8 using XDA Free mobile app
The latest Facer update enables "copy protection" so Watchmaker won't import anymore.
Any chance of creating this face - http://www.authenticwatches.com/tag-heuer-kirium-wl1180-ft6000.html#.VKK5xf-CADA?
Thanks.
Hi Bikegeek. Right now I am not taking requests since I am still learning how to make watch faces. I will keep your request in mind once I get good at it. The Tag Heuer F1 was something I was trying to remember my old gimp skills on.
Sorry for now BIkegeek.
Bikegeek said:
The latest Facer update enables "copy protection" so Watchmaker won't import anymore.
Any chance of creating this face - http://www.authenticwatches.com/tag-heuer-kirium-wl1180-ft6000.html#.VKK5xf-CADA?
Thanks.
Click to expand...
Click to collapse
illuminati5288 said:
Hi Bikegeek. Right now I am not taking requests since I am still learning how to make watch faces. I will keep your request in mind once I get good at it. The Tag Heuer F1 was something I was trying to remember my old gimp skills on.
Sorry for now BIkegeek.
Click to expand...
Click to collapse
No problem.
Can you post a good hi res pic in front view that I could use.
Bikegeek said:
No problem.
Click to expand...
Click to collapse
illuminati5288 said:
Can you post a good hi res pic in front view that I could use.
Click to expand...
Click to collapse
Here's bunch that should work - http://www.zeitauktion.com/component/jshopping/tag-heuer/kirium-140365.html?lang=es
And this
Uploaded the new watch face that I made. It is the autodromo stradale.
Bikegeek said:
The latest Facer update enables "copy protection" so Watchmaker won't import anymore
Click to expand...
Click to collapse
As of this version, his "copy protection" is laughable and won't take more than a few seconds for the WatchMaker dev to get past it, if he wants to. The Facer dev is taking the json file and converting it to base64.
For example, the OP's latest watch face's "protected" watchface.json file looks like this if you open it in a text editor:
Code: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==
Converted back from base64:
Code:
[{"type":"image","id":0,"width":"320","height":"320","x":"0","y":"0","r":"0","opacity":"100","low_power":true,"alignment":0,"is_tinted":false,"tint_color":0,"hash":"c25ccbd934715150612e296fb4ee992"},{"type":"image","id":1,"width":"320","height":"320","x":"160","y":"160","r":"#DWFKS#","opacity":"100","low_power":true,"alignment":4,"is_tinted":false,"tint_color":0,"hash":"804ab1227ee1a422d0d99faa6e783d44"},{"type":"image","id":2,"width":"320","height":"320","x":"160","y":"160","r":"#DWFMS#","opacity":"100","low_power":true,"alignment":4,"is_tinted":false,"tint_color":0,"hash":"21593b81e743d04336f38ca99cb0624c"},{"type":"image","id":3,"width":"320","height":"320","x":"160","y":"160","r":"#DWFS#","opacity":"100","low_power":false,"alignment":4,"is_tinted":false,"tint_color":0,"hash":"3c00670b0015069d7f8e165d7b9060da"},{"type":"text","id":4,"text":"#Dd#","opacity":"100","color":"-16777216","bgcolor":"0","x":"260","y":"170","size":"18","r":"0","alignment":1,"font_family":4,"transform":0,"bold":false,"italic":false,"low_power":true,"low_power_color":"-16777216"}]
I'll make sure my next update to my Face Viewer app 1) works with these new files and 2) un-protects them for ya.
To the OP: very nice job on the two you've done so far. Very good eye for detail.
looking good, keep up the good work
My 3rd watch face is up. Check the 1st post for details. I used the badapps.fr version as a source and modified it.
The Helvetica Mondaine is up.
Does anyone know if I can get the #Dd# date displayer to display with two digits. For example : 04 instead of just 4.
Thanks
Have got both watchmaker and facer files now. But henceforth will make for watchmaker only since it is a much better app than facer.
The zip files have both the versions in them, so extract and choose the correct version.
3D scanner app exports all scanner objects with there textures to phone memory. (Mtl, obj, texture files)
Would it be possibile to import prescanned objects to the app ?
Has engine success in this ?
also I wonder if it is possible to make some shiny surface not shine.
is there a spray or such to achieve this ?
It's an interesting app, not sure if it has any use yet, but it's a start. It can't / won't do faces.
It actually can do face and head
mrmrmrmr said:
It actually can do face and head
Click to expand...
Click to collapse
Didn't Samsung remove that capability day after phone went for sale with the update? I downloaded original version, deleted updated one and installed old one. No go, there is no icon to start it up and as soon as I start it via Bixby vision, it closes. If you know the trick, can you please share or if it's a secret send me a msg? I'm very interested in this app and it was the thing that pushed me into buying 10+, since it's lacking other stuff I wanted and I was on the fence, kind of undecided originally, till I saw that 3d app. Now the stupid app is totally crippled. BTW I have SD so root is out of the question ATM.
No more facial / people scans. This option was removed with the update. Even now I can't completely scan an object as it fails mid way through. Hopefully they will update it again so it's more stable.
rlee008 said:
No more facial / people scans. This option was removed with the update. Even now I can't completely scan an object as it fails mid way through. Hopefully they will update it again so it's more stable.
Click to expand...
Click to collapse
I noticed this also. I tried to scan my cousin and it kept giving me an error. I was able to it but only partially starting from the back of the head but by the time I got to the face it kept shutting off. What's up with this? Security issue?
No clue but the only way I was able to scan my kids was to install the original installer of the 3d app and then turn off data and wifi so it wouldn't connect to Samsung and request the update.
Dont see a way to import into the app.
Could be possible.
And for scanning people. I believe it still works.
Seems with the new update. That it fails of the ground is black or darkly colored.
So if your scanning a face. Try to have the person wear a light colored shirt.
Also i had to untill the old one and reboot a few times before installing the new to get it to work.
Can someone post a link to the "original" 3d scanner app from Samsung? The updated one is garbage!
greatg said:
Can someone post a link to the "original" 3d scanner app from Samsung? The updated one is garbage!
Click to expand...
Click to collapse
https://www.apkmirror.com/?post_type=app_release&searchtype=apk&s=3d+scanner
I scanned my wife last week with the updated version. I can't show it because she was naked lol. Had no issues.
hayabusa1300cc said:
https://www.apkmirror.com/?post_type=app_release&searchtype=apk&s=3d+scanner
I scanned my wife last week with the updated version. I can't show it because she was naked lol. Had no issues.
Click to expand...
Click to collapse
Doubt your the 1st or last to do it lol
I scanned my wife last week with the updated version. I can't show it because she was naked lol. Had no issues.[/QUOTE]
Lol.. first thing I told my wife i wanted to do when i got the phone but havent done it yet.
hayabusa1300cc said:
https://www.apkmirror.com/?post_type=app_release&searchtype=apk&s=3d+scanner
I scanned my wife last week with the updated version. I can't show it because she was naked lol. Had no issues.
Click to expand...
Click to collapse
Proof or it didn't happen.....
this thread has gone out of its purpose.
I was asking to find/develop import method for pre scanned objects.
nobody interested ?
Win10 comes with 3D viewer, I could open all 3D scans I made on my phone with that viewer, after I transferred the files to my laptop and unzipped them. They actually looked pretty good, textures and everything. Viewer has 3D print and export options, but my 3D printer is not set with Win10 3D printing, so couldn't test that.
But I'm not sure what exactly are you trying to do? Import scans made with phone into what? 3D print them? View them in VR? Or are you trying to import 3D scans from others into phone and use them there? I think Samsung is using Arcsoft software for 3D scanning, maybe that company has other software that could be used with their scans.
mrmrmrmr said:
this thread has gone out of its purpose.
I was asking to find/develop import method for pre scanned objects.
nobody interested ?
Click to expand...
Click to collapse
All you need after it's created the scan and resulting files(share it as an attachment in an email)is to import it into a slicer(the stl can then be imported directly into your slicer application). Then, create a gcode file to import into your printer..
Done..
Sent from my Note 10+ using Tapatalk
MatroxD said:
All you need after it's created...
Click to expand...
Click to collapse
pete4k said:
Win10 comes with 3D viewer...
Click to expand...
Click to collapse
@pete4k , @MatroxD
Thanks for your responses but I think you totally misunderstood my question.
I am not asking about scanned obkects on phone. I am asking about importing prescanned objects (either scanned on another Note 10 or on PC) to the phone.
Actually I have a few nicely scanned objects (with texture) which I would like to use as AR figures.
did you try copying a 3d scan from another Note, or from a pc? error message or anything? i don't see what would be the problem transferring and viewing 3d scan files between notes but maybe from another device there could be issues due to potential incompatibilities between software/hardware.
raul6 said:
did you try copying a 3d scan from another Note, or from a pc? error message or anything? i don't see what would be the problem transferring and viewing 3d scan files between notes but maybe from another device there could be issues due to potential incompatibilities between software/hardware.
Click to expand...
Click to collapse
@raul6
Of course, I tried that. File from other Note10+ or from other source does not show up in the application.
I guess the app saves them in a DB together with the individual files. So , we need a "import" method to use them.