Hi guys,
I'm hoping someone can help me I'm desperate.
I have rooted my HTC One X - and i wanted to install a new ROM. Maybe about a month ago now I got stuck and left it as I had a replacement phone. Now the replacement is messed up and I need this phone back on-line so I'm pleading with someone to help me. On top of that if it wasn't bad enough I lost all my data on pc.
It a nutshell, once I successfully rooted my phone I followed some guidance online and installed clockworkmod recovery v6.0. 4.8. at the time I had then been able to connect my phone to pc and copied over the following zip files:
cm-11-20140804-SNAPSHOT-M9-endeavoru.zip and
gapps-kk-20140606-signed.zip.
I followed the instructions and wiped all data factory reset, including the partitions and wiped dalvik cache.
I then installed the ROM zip followed by the gapps zip rebooted the phone and it would not pass the white HTC screen and was perm stuck on this. I have tried everything and I'm pulling my hair out. Read so much day on end and feel like I'm just getting no where. I don't like stating threads as i normally find my answers.
I would really appreciate some support or guidance to fix this issue please.
Please see below the following is showing on my boot-loader screen. The problem I'm having is that I cant access the phone at all and it just wont connect it to the PC to allow me to copy new files over to the storage to then run via recoverymod. How can I do this please. as its just sticks.
Yesterday I read something about boot.img I then downloaded Flash_boot_33.x_0.1 and ran the install-boot windows. This has all run OKAY. After which when I reset the phone it went past the white HTC screen on to the cyanogenmod and I thought sorted, how wrong was I where I now have a blue spinning arrow, and it continues till battery dies.
This is how my boot-loader screen reads:
***unlocked***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1 . 36 . 0000
CPLD-None
MICROP-None
RADIO-5 . 1204 . 163R . 30
eMMC-bootmode : disabled
CPU-bootmode: disabled
HW Secure boot : enabled
MODEM PATH : OFF
Nov 16 2012, 18:32:39
FASTBOOT USB
SD Checking...
Failed to open usb master mode
[Preload] Failed to open usb master mode
loading PJ46IMG.zip image...
Failed to open usb master mode
Please help me if possible I feel I have missed a step and I'm unable to now correct it.
I did also find this http://forum.xda-developers.com/htc-one-x/help/stuck-cyanogenmod-11-bootscreen-t2815076 thread, but this needs access to the phone storage which I don't have as unable to connect to PC.
Thanks and very much appreciated.
Nad
N4D5 said:
Hi guys,
I'm hoping someone can help me I'm desperate.
I have rooted my HTC One X - and i wanted to install a new ROM. Maybe about a month ago now I got stuck and left it as I had a replacement phone. Now the replacement is messed up and I need this phone back on-line so I'm pleading with someone to help me. On top of that if it wasn't bad enough I lost all my data on pc.
It a nutshell, once I successfully rooted my phone I followed some guidance online and installed clockworkmod recovery v6.0. 4.8. at the time I had then been able to connect my phone to pc and copied over the following zip files:
cm-11-20140804-SNAPSHOT-M9-endeavoru.zip and
gapps-kk-20140606-signed.zip.
I followed the instructions and wiped all data factory reset, including the partitions and wiped dalvik cache.
I then installed the ROM zip followed by the gapps zip rebooted the phone and it would not pass the white HTC screen and was perm stuck on this. I have tried everything and I'm pulling my hair out. Read so much day on end and feel like I'm just getting no where. I don't like stating threads as i normally find my answers.
I would really appreciate some support or guidance to fix this issue please.
Please see below the following is showing on my boot-loader screen. The problem I'm having is that I cant access the phone at all and it just wont connect it to the PC to allow me to copy new files over to the storage to then run via recoverymod. How can I do this please. as its just sticks.
Yesterday I read something about boot.img I then downloaded Flash_boot_33.x_0.1 and ran the install-boot windows. This has all run OKAY. After which when I reset the phone it went past the white HTC screen on to the cyanogenmod and I thought sorted, how wrong was I where I now have a blue spinning arrow, and it continues till battery dies.
This is how my boot-loader screen reads:
***unlocked***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1 . 36 . 0000
CPLD-None
MICROP-None
RADIO-5 . 1204 . 163R . 30
eMMC-bootmode : disabled
CPU-bootmode: disabled
HW Secure boot : enabled
MODEM PATH : OFF
Nov 16 2012, 18:32:39
FASTBOOT USB
SD Checking...
Failed to open usb master mode
[Preload] Failed to open usb master mode
loading PJ46IMG.zip image...
Failed to open usb master mode
Please help me if possible I feel I have missed a step and I'm unable to now correct it.
I did also find this http://forum.xda-developers.com/htc-one-x/help/stuck-cyanogenmod-11-bootscreen-t2815076 thread, but this needs access to the phone storage which I don't have as unable to connect to PC.
Thanks and very much appreciated.
Nad
Click to expand...
Click to collapse
are you flashed the boot.img from rom archive. and When go in bootloader go with disconected phone and then connect to the computer and you will never see this
SD Checking...
Failed to open usb master mode
[Preload] Failed to open usb master mode
loading PJ46IMG.zip image...
Failed to open usb master mode
Thant said:
are you flashed the boot.img from rom archive. and When go in bootloader go with disconected phone and then connect to the computer and you will never see this
SD Checking...
Failed to open usb master mode
[Preload] Failed to open usb master mode
loading PJ46IMG.zip image...
Failed to open usb master mode
Click to expand...
Click to collapse
When I go with disconnected phone I still can't get it working properly. I installed the boot.ing from the pc using the cmd. The problem as above I have is I am unable to connect to pc to copy files over and the phone does not go past the boot screen.
Please guide.
Sent from my HTC One_M8 using XDA Free mobile app
N4D5 said:
When I go with disconnected phone I still can't get it working properly. I installed the boot.ing from the pc using the cmd. The problem as above I have is I am unable to connect to pc to copy files over and the phone does not go past the boot screen.
Please guide.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Instal philz 5.15.9 and mount sd card then copy the rom.zip to your sd card install the rom flash the boot.img from rom archive and you are ready
Thant said:
Instal philz 5.15.9 and mount sd card then copy the rom.zip to your sd card install the rom flash the boot.img from rom archive and you are ready
Click to expand...
Click to collapse
I cannot access the storage on the pc there is no way to copy the files to phone as it does not connect to pc..
Sent from my HTC One_M8
N4D5 said:
I cannot access the storage on the pc there is no way to copy the files to phone as it does not connect to pc..
Sent from my HTC One_M8
Click to expand...
Click to collapse
Are you flash Philz 5.15.9 there 100% the mount sd card work tested more then 100 times. Exactly Philz 5.15.9. To flash recovery you need only fastboot
So what your saying is that I can download this flash Philz 5.15.9 and then run it via my pc through fastboot. This should then boot my phone properly.
I cant find flash Philz 5.15.9 download any links.
Thanks
Correction - found the link -
http://d-h.st/users/philz_touch/?fld_id=16046#files
Right so I have downloaded Philz 5.15.9 and I have run the exe on pc. Nothing has happened, how do I copy to sd storage or copy anything to the sd card. I am unable to get past boot screen when i turn phone on.
Yes finally sorted if anyone is interested to how, its seems like I had the wrong boot img. So from my original download folder I used fastboot to run just the boot.img and its working now, i used the below instructions step by step and used my boot img.
Result.
https://www.youtube.com/watch?v=5xVl2dBTnmI
Related
Heya,
I was using the LeeDroid ROM until today, when I desided I want Cyanogen.
I backed up the phone using ROM Manager, wipe and flashed Cyanogem 6.1 RC2. The phone restarted, turned on - but it cn't load the actual android OS - just keeps restarting on the blue wheel-thing animation.
I can boot my phone into recovery, but can't do much from there since its S-ON.
The recovery windows says:
bravo pvt1 ship s-on
hboot-0.80.0000
microp-031d
touch panel-synt0101
radio-5.10.05.23
fastboot
recovery
clear storage
simlock
what can I do to get my phone working again? Will a simple restore using HTC software do the trick (followed by root with unrevoked)?
Thanks
CoreOxide said:
Heya,
I was using the LeeDroid ROM until today, when I desided I want Cyanogen.
I backed up the phone using ROM Manager, wipe and flashed Cyanogem 6.1 RC2. The phone restarted, turned on - but it cn't load the actual android OS - just keeps restarting on the blue wheel-thing animation.
I can boot my phone into recovery, but can't do much from there since its S-ON.
The recovery windows says:
bravo pvt1 ship s-on
hboot-0.80.0000
microp-031d
touch panel-synt0101
radio-5.10.05.23
fastboot
recovery
clear storage
simlock
what can I do to get my phone working again? Will a simple restore using HTC software do the trick (followed by root with unrevoked)?
Thanks
Click to expand...
Click to collapse
Which version of Clockworkmod recovery did you fakeflash? There is an issue with the latest one that makes your SDcard unaccessible afterwards. It also mess up your USB.
Here is a thread that guides you how to fix it: http://forum.xda-developers.com/showthread.php?t=691639
I used the latest one, 2.5.1.7 I think.
Isn't there a way to restore the phone with the HTC software, sonething lite the iphone+itunes combo?
Is your sd card not being recognzed?
As you said you created a backup using rom manager before you flashed the new rom. So why dont you just enter hboot, go to recovery and the restore youre phone to the backup that you made using rom mabager before you flashed?
When I select "recovery" using the HBOOT I get a picture of a phone, and a red triangle with an exclamation mark. Does this mean I have to do the USB brick fix?
hmmm thats odd ... sounds like it could be a usb brick related issue, im not sure as i havnt had the same problem before or seen anyone else in the forum experiencing this problem.
I think you should read up more about the usb brick fix, hopefully there is something there that would be able to help you ... if its already known that the latest version of clockworkmod does give this problem then im sure its this and you would be able to find a solution to this problem.
Good luck
UPDATE:
My bad, I was supposed to press volumeup+power to see the recovery screen.
Now, when I do that I get "E:Can't open /cache/recovery/command", and get only 4 options:
reboot system now
apply sdcard:update.zip
wipe date
wipe cache
Is this related to the USB BRICK thing?
You need to wipe data when switching roms, this will fix the bootloop.
I would also suggest you flash a permanent recovery for ease of use. You need to use unrevoked to do this.
CoreOxide said:
UPDATE:
My bad, I was supposed to press volumeup+power to see the recovery screen.
Now, when I do that I get "E:Can't open /cache/recovery/command", and get only 4 options:
reboot system now
apply sdcard:update.zip
wipe date
wipe cache
Is this related to the USB BRICK thing?
Click to expand...
Click to collapse
This is the default android recovery screen. The error "E:Cant open...." is something I also get.
Do you have an update.zip on your SDcard? Like the clockworkmod recovery? http://forum.xda-developers.com/showthread.php?t=839640Use 2.5.0.7 and not 2.5.1.2 (has the fail you most likely see now). If correct update.zip on SDcard, try to press apply sdcard. If youre able to do so, you are accessing your sdcard. If youre getting problems applying this update file. I suggest following the thread I told you in my first post You then have to make your SDcard accessible with a fastboot command.
You are accessing fastboot by holding vol down while powering your phone on. Select fastboot. Plug your USB. Download the Android SDK or only fastboot.exe. Run this command from cmd: "fastboot oem enableqxdm 0". You should get a return command like "okay", and your SD card should be accessible again. Now you will need to follow the guide and fix your USB. However, you should be able to flash a new ROM now when your SDcard is accessible again, or just restore the nandroid backup that gave you this problem to begin with
Update: post #30, weee!
jmelhus said:
This is the default android recovery screen. The error "E:Cant open...." is something I also get.
Do you have an update.zip on your SDcard? If so try to press apply sdcard. If youre able to do so, you are accessing your sdcard. If youre getting problems applying this update file. I suggest following the thread I told you in my first post You then have to make your SDcard accessible with a fastboot command.
Click to expand...
Click to collapse
When i select that I get "E; failed to open sdcard\update.zip (no such file or directory)
E: signature verification failed"
Does this simply mean I don't have that file on my card?
If so, is there a way to access the card in mass storage mode while the phone is in HBOOT?
CoreOxide said:
When i select that I get "E; failed to open sdcard\update.zip (no such file or directory)
E: signature verification failed"
Does this simply mean I don't have that file on my card?
If so, is there a way to access the card in mass storage mode while the phone is in HBOOT?
Click to expand...
Click to collapse
Do you have a mem reader for windows/linux? Look if you have the file or not. If you don't have it, copy it there. If it's there, you have a problem with accessing the SDCard.
I would say, If I were you, I would try to "repair" the SDcard with the fastboot command first. Most likely, your ROM will boot again when it can read from your SDcard.
Other options would be to try to push the update file with ADB in Android Recovery. Most likely you can't push it either since your SDcard most likely is inaccessible. Try fastboot
Download Android SDK for Windows here: http://dl.google.com/android/android-sdk_r07-windows.zip
MD5: 69c40c2d2e408b623156934f9ae574f0
Unzip the file. Open CMD, navigate to the tools folder in SDK. Issue the command.
Source: http://developer.android.com/sdk/index.html
I ran the SDcard fix on CMD, it said "OKAY", but nothing changed in the phone's condition.
I put the SDcard on a card reader and saw there are backup files (.img) in the clockworkmod directory. how do i get the phone to recover from them?
The "update.zip" file, where can i get that one?
CoreOxide said:
I ran the SDcard fix on CMD, it said "OKAY", but nothing changed in the phone's condition.
I put the SDcard on a card reader and saw there are backup files (.img) in the clockworkmod directory. how do i get the phone to recover from them?
The "update.zip" file, where can i get that one?
Click to expand...
Click to collapse
You can get your update.zip file from here: http://forum.xda-developers.com/showthread.php?t=839640
Download the 2.5.0.7 zip file and rename to update.zip. Put on root of SDcard and apply sdcard: update.zip in android recovery. From here, go to nandroid, restore, and select your backup.
Doesn't the Update.zip file suppose to be a zipped ROM?
Not necessarily. A zip can flash a lot of different things. I'm not that much into it. But it all depends on the content of the zip file.
How do I " go to nandroid"?
CoreOxide said:
How do I " go to nandroid"?
Click to expand...
Click to collapse
Don't remember what it's called exactly. But when running update.zip (clockworkmod), you should have a restore menu somewhere...
Thanks a lot man! recovering right now.. will update when done.
About that S-ON thing, will the Unrevoked reflash option "Remove phone security" take care of this? Is there a risk in re-rooting?
I want to add some notifications sounds and the "system" folder is write protected
EDIT:
The restore works just fine!
I have searched for hours and give up finding a workingsolution to the problem.
Long story short - Installed the latest OTA update manually by bypassing signature verfication on a rooted Froyo phone (still not entire sure how I did this, but I'll get back to this later).
The phone currently does boot loops repeatably. I can enter Hboot and menus Fastboot, Recovery, Clear Storage and SIMlock.
Phone info:
Bravo PVT1 ship s-on
Hboot 0.93.0001
Microp 031d
Touch panel-synt0101
radio-5.11.05.27
aug 10 2010, 17:52:18
Rooted with unrevoked 3 (I think)...
I installed Andriod SDK and ADT plugin for Eclipse on my WinXP PC.
USB Connectivity
My USB connectivity have three running USB scenarios
1. Then boot looping the HDD Icon show up momentarily but am unable to access it. In control panel the HDD works fine. I assume the SD Card is dismounted.
2. In Hboot mode, only Unrevoked USB drivers would install for then connecting the phone with a USB cable to the computer.
3. In Fastboot mode, only Google USB drivers (from the SDK) worked.
Though, there should be connectivity then applying the "ADB shell" command it detects no device in either boot mode. Either does the RUU Toolkit or Unrevoke 3.21.
Signature verification failed
I have a micro SD adoptor, so I have tried various ROMs and run recovery mode attempting to flash the phone. Depending on which ROMs the signature verifications make different progress (0-20 %).
What is funny, is that what allowed me to install the OTA in the first place was toggle the verification off. But, I have no idea how I did this. I do not have an alternative recovery manager installed. Though, it seems something from deleted from the update due to the install being an OTA. And that there might have been an alternative recovery mode.
I have been unable to "recovery-windows.bat" trick as no USB connectivity!
The latest PB99IMG file is currupt as that would be my last attempt. If anyone have this working please send it my way. Also, I have downloaded a 168 MB version of this file but I do not know what to do with it!?
I hope someone finds this a challenge and can help out! I have almost given up...
Cheers
Do a search on here for how to apply the PB99IMG.
It is quite a common request and there are lots of posts telling you how to do it
Sent from my HTC Desire using Tapatalk
mikep99 said:
Do a search on here for how to apply the PB99IMG.
It is quite a common request and there are lots of posts telling you how to do it
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Thanks for the heads up. I know this is a quite common post hence my frustration with nothing working.
I emphasized that the PB99IMG from the server is corrupt (10x download attempts) and if anyone could email a functional file?
Email a 168MB file?? Good luck with that one!!
Download this:
http://www.megaupload.com/?d=N03CIN0U
And then read the Word document I attached to this thread. It explains how to get the PB99IMG file from an RUU:
http://forum.xda-developers.com/showpost.php?p=10509780&postcount=102
The reason you can't 'turn off signature' is because the OTA has flashed the stock recovery back on. Yet another example of why you should NOT FLASH AN OTA ON A ROOTED PHONE!!
Hi ,
I have an HTC who planted and I can not do anything.
I try to put a zip on the memory card but nothing about it. RUU does not work on htc, bug at the time of restart in bootloader: s
BRAVO UNKNOWN SHIP S-ON
HBOOT-0.75.0000
TOUCH PANEL-SYNT0101
RADIO-4.05.00.11
Mar 5 2010,21:12:15
I can't do a Goldcard i don't know why, and change cid does not work because it is not recognizing the command "writecid"
Pleas help because i have no warranty now, so I can not send it to HTC
Use the 2.3.3 RUU
Which RUU is
EDIT: I found one in htcdev
Mixyde said:
Which RUU is
EDIT: I found one in htcdev
Click to expand...
Click to collapse
Instead of asking straight away try to do some searching, it helps.
I have the same problem with 2.33 : it gets stuck in waiting for bootloader , the phone get black screen and few second later : ERROR [171] : USB CONNECTION ERROR
EDIT: The logo Boot have change : I have black screen with HTC in grey
EDIT2 : after reboot because it still stuck int boot logo, the original boot came back
Mixyde said:
I have the same problem with 2.33 : it gets stuck in waiting for bootloader , the phone get black screen and few second later : ERROR [171] : USB CONNECTION ERROR
EDIT: The logo Boot have change : I have black screen with HTC in grey
EDIT2 : after reboot because it still stuck int boot logo, the original boot came back
Click to expand...
Click to collapse
So it's back to normal?
And for your USB connection error I'm guessing you weren't in fastboot.
Turn off the phone, hold BACK and POWER, then run the RUU with the phone plugged in.
No, nothing back to normal, I always was in fastboot, and when it says: reboot to bootloader, then the screen get black and nothing ..then ERROR [171]
look at my guide and using a RUU without usb
I tried and I get a message that passes very quickly, and I can not create GC.
I am in this situation [2]ADVANCED BOOT PROBLEMS S-ON
Mixyde said:
I tried and I get a message that passes very quickly, and I can not create GC.
Click to expand...
Click to collapse
you don't need to with the 2.3 update, are you sure you're doing this right?
Yes, and with the 2.3 update I juste have a .cab, not a rom.zip
EDIT: Sorry, I haven't seen the good directory
I placed the rom.zip in the root of my SD, and I renamed in PB99IMG.zip, I then placed the SD in the Desire and VOLDOWN + POWER ... and nothing
Okay I have absolutely no idea what on earth you're doing to your phone, so before you break it:
Download this
Extract the rom.zip and rename to PB99IMG.zip
put it on the root of your sd-card (NOT in any folders)
poweroff, hold VOLUME DOWN & POWER
when it asks to update, select yes.
After the bootloader, I have the fast message that the phone did not found a file or a wrong file
Well, this is weird, really don't see why it doesn't work..
You can try one more thing, make a goldcard (use this to get CID [copy without commas, spaces. Just letters/numbers], then follow this tutorial, and skip the part where they get the CID using the phone)
Then download this PB99IMG.zip and try it with that.
....Nothing, always the same quick message.
Mixyde said:
....Nothing, always the same quick message.
Click to expand...
Click to collapse
and you tried running the RUU from the PC in fastboot mode? I dunno, there's nothing else you can really try... if PB99IMG doesn't work and RUU doesn't work there are no other options...
Backup your sd-card, format it, then put the PB99IMG.zip on it, then try it one last time.. otherwise I dunno send it to HTC
Nothing works, so i will try to find a friend who had a Desire to help me doing a GC , now I have a Brick
Mixyde said:
Nothing works, so i will try to find a friend who had a Desire to help me doing a GC , now I have a Brick
Click to expand...
Click to collapse
I just said how to make a goldcard without a phone.. use the program to get the CID and then continue the tutorial without the phone (use an sd adapter)
Don't know whether it'll do you any good though..
By the way are you using the original cable when running the RUU?? sometimes it doesn't work if it's not.
Hey everyone. I know there are already a few threads with boot loop animations, and am having difficulties finding the same situation as what I'm going through. Here is what the phone used to have before it randomly started looping:
Rooted - with Stock rom, using ClockwordMod Recovery 5.5.0.2
Used Go Launcher Theme ( if that even matters )
No additional roms installed or anything, the phone is 3 months old.
Ok here is where I'm stuck. I understand I should reflash somethings like recovery image or something, but I'm stuck with one big problem. My computer and phone don't recognize using the USB mount.
The message I get is called "Unable to open lunfile ( no such file or directory)
Here's what screens I can get to:
1. Hold vol up/down while holding power ( the little android with its belly open, and the options Start - Restart Bootloader - Recovery mode - Power Off )
2. Hold vol down - ODIN mode, with the START option only
I can access WMD recovery and factory reset, Try to install my old backup, nothing works at all in that area, no matter what I do.
Can someone advise me a step by step way of getting my computer to recognize my phone, so that I am able to do fastboot, or reflash, or anything to get my phone working again. I can't access my internal memory at all.
It's even possible that I've read too much, and my frustration is getting in the way, if so I apologize! Some guidance would be greatly appreciated!
Thanks in advance of course! I need my phone for business!
Cheers,
Install the drivers on a computer then use fastboot oem unlock. Or just factory reset it from within recovery.
Sent from my Galaxy Nexus using Tapatalk 2 Beta-4
Try my siggy.
I'm not sure about the exact error:
But the link there will get you the correct drivers.
Also, as stated...try to factory reset.
You'll lose your apps/data that way though =/
Hopefully you can get the driver installed and get your computer to recognize.
If so, follow this to back up your apps:
http://forum.xda-developers.com/showthread.php?t=1420351
Have exactly the same setup as you (rooted/stock/CWM) and had the animation bootloop - animation would just loop until a battery pull.
Only thing that solved it was a factory reset from recovery. Been working fine for the 4 weeks since. No need for any reflashing etc. Titanium recoveries have all worked fine as well. Didn't try my Nandroid backup as I thought that may still have the 'fault' built in.
I had a boot loop for every from I tried to flash...wat fixed it was before flashing u need to wipe system data and wipe the cache in the recovery...ie a clean install...then every rom I tried worked...so I think ur missing that crucial step coz it worked for me
Sent from my Galaxy Nexus using Tapatalk
Hey guys, as stated above I've done numerous factory resets, it still seems to boot. I will for sure try to get the drivers installed so my phone is recongised by the computer, but would need step-by-step assistance when doing fastboot, or whatever the next step is.
Looking for more help though! Keep em coming!
?
Any other ideas?
Thanks!
Ok guys, so here's where I'm at now. I've used Jubakuba's sticky link, located here:
http://forum.xda-developers.com/showthread.php?t=1529058
Everything is able to be recognized up to the point where it says "Put the su.zip on your phone."
Since I cannot access my phone contents, since I keep getting this "Unable to open lunfile ( no such file or directory), it does not allow me to add anything to my phone.
I re-installed CWD as stated in the list of things to do, and all that went well. But I have the same issue, I tried factory resetting all that. erase cache, and still stuck with the same issue.
What's my next step now peeps? Looking for a quick answer as I have time to do it tonight!
Edit***
Just tried this trick: but it says it does not recognize the device?? what is going on! Please help someone! Thanks!
Panic Section! (Something is Wrong)
Q: My phone won't boot!
A: The easiest option is to get into recovery and restore a nandroid using the above guide (pull battery to put phone in an off-state if needed).
However, more advanced options are available if you don't have a nandroid available (You're naughty).
Do you have another rom .zip available on your SD card? If so, simply use the above guide for installing a rom to get you booting again.
If not, you can download one on your PC. Boot into fastboot (the green Android with open chest menu).
Move the .zip to the C:\android-sdk-windows\platform-tools folder.
Open ADB.
Change the NAMEOFZIP.zip below to the correct file name...and perform the action.
Surely your computer recognizes your phone. Otherwise how were you able to unlock the bootloader and flash the recovery?
And I've never seen that error message before. It doesn't even make any sense to me. Where are you seeing it? On your phone or on your computer? And in what context? What are you trying to do when it shows up?
If your phone isn't booting I'm not sure that you can copy any files to it yet. (Maybe you can use adb in clockworkmod? I'm not sure) What I do know you can do is flash the stock ROM and start over.
Download the image from Google here:
http://code.google.com/android/nexus/images.html
Here's a instructions for the GSM version:
http://forum.xda-developers.com/showthread.php?t=1366806
For the Verizon version, I can't find the thread at the moment but you just replace the filenames and also there's 2 radios to flash so:
fastboot flash radio *filename*
fastboot reboot-bootloader
fastboot flash radio-cmda *filename*
"Unable to open lunfile ( no such file or directory) appears on the phone, in CWD mode, when trying to attempt "mount Usb" to be able to access my internal storage .
I am attempting your thoughts right now.
I will post with results
Ok I tried to do this step. This is the outcome I received on the computer after even typing the first step:
'fastboot-windows' is not recognized as aninternal or external command, operable program or batch file.
A thing to stress, I'm not sure how to do step 1: 1) Take a Nandroid Backup if you have CWM installed.
EDIT***
GREAT NEWS!
used this setup!
http://android.modaco.com/topic/348161-01-feb-r4-superboot-rooting-the-gsm-lte-galaxy-nexus/
and it worked!
Thank you everyone! Going to play with my phone and make sure it all works!
Macinshak said:
Ok here is where I'm stuck. I understand I should reflash somethings like recovery image or something, but I'm stuck with one big problem. My computer and phone don't recognize using the USB mount.
The message I get is called "Unable to open lunfile ( no such file or directory)
Click to expand...
Click to collapse
the problem is when that happen?? when ur phone is booted and u plug the usb cable to ur pc? or when u are under recovery and want mount the usb mass storage? the second one doesn't work
Dear XDA-members,
This afternoon, I tried to root mij HTC One X and flash it to Cyanogenmod 10.2. During the flashing, I made the mistake to forget to put the boot.img and Google Apps files on my SD card. During the rom installation, I got stuck in the splash screen. For this reason, I formatted my SD kaart in the CWM recoveryscreen but now my phone doesn't have any rom at all. When I turn on my phone, I only get to see the white HTC screen. When I try to connect my phone to my pc, it doesn't get recognized. I just want to get my stock ROM back again to get my phone working. I do have acces to the CWM recoveryscreen.
I downloaded the fastboot and RUU files, but fastboot won't recognize my device through the commandscreen. This is why I can't put the RUU files on my phone.
Can someone please help me? I don't have a clue what to try next to save my phone.
Thanks in advance!
kajvb said:
Dear XDA-members,
This afternoon, I tried to root mij HTC One X and flash it to Cyanogenmod 10.2. During the flashing, I made the mistake to forget to put the boot.img and Google Apps files on my SD card. During the rom installation, I got stuck in the splash screen. For this reason, I formatted my SD kaart in the CWM recoveryscreen but now my phone doesn't have any rom at all. When I turn on my phone, I only get to see the white HTC screen. When I try to connect my phone to my pc, it doesn't get recognized. I just want to get my stock ROM back again to get my phone working. I do have acces to the CWM recoveryscreen.
I downloaded the fastboot and RUU files, but fastboot won't recognize my device through the commandscreen. This is why I can't put the RUU files on my phone.
Can someone please help me? I don't have a clue what to try next to save my phone.
Thanks in advance!
Click to expand...
Click to collapse
Can you mount storage in recovery ? If you can....
Mount storage in recovery and copy/paste rom and kernel on SD, flash rom and kernel, than flash boot.img via fastboot.
Can u do any fastboot commands while phone is on bootloader?
Sent from my HTC One X
Thanks for the quick responses!
Unfortunately, I can't mount storage in recovery so I can't acces my SD card.
I can, however, access the fastboot menu so it's possible to do fastboot commands and get into the CWM menu.
https://www.dropbox.com/s/yqzlpqo8illa53j/Philz recovery 5.15.9.img
Flash this recovery and you can mount the sd
Thanks, but can you explain how to do that?
I don't think I can use fastboot because my phone doesn't get recognized, but maybe I'm doing something wrong.
OK, I found a way to do that via fastboot, but I couldn't mount it just like in CWM. I did download a RUU.exe because I figured that fastboot is working for me! So I tried to install the stock ROM using the RUU.exe and fastboot, but the flashing progress was aborted because apparantly that RUU version was older than the one on my phone. I googled for a newer one, but there are no newer .exe files and according to others I should use a nandroid backup zip file.
How should I do that? Or is there any way that I can make the RUU.exe I downloaded work, because it seemed to me that the program worked fine except for the older version part. Or is it the easiest to flash Cyanogenmod, I've got those files on my pc as well. I wouldn't know how to do that, just by flashing boot.img from the zip file? I really hope you can help me out!
Further notes: during the RUU installation progress, CWM and Philz were wiped from the SD card and I had to relock my phone. I don't know if any of that should cause a problem though.
Flash that philz, enter recovery. Put in the usb cable and mount. Wait until the sdcard pops up on windows. Can take minutes......but works for sure !
Thank you, I'll try that tonight! Then, what kind of files should I copy on the SD card? And can I use the Cyanogenmod files as well as the stock ones? Lastly, do I need to unlock my phone again?
Unlock, flash recovery, flash boot.img, make a full wipe, install CM, install GAPPS ..... reboot
OK, so just to get it straight:
First I unlock it, then flash philz via fastboot. Then enter recovery mode and mount USB. After that, I copy the Cyanogenmod boot.img and the GApps file on the SD card. Lastly, I install the boot.img file via the Philz recovery program and then the GApps, and I reboot.
Is this right or should I do something different?
Thank you so much!
Cm.zip to sdcard, boot.img flash via fastboot. Install CM.zip and gapps via recovery.
Two last questions:
Which boot.img file do I need to use? The one from the CM.zip?
And how should I do the full wipe?
Also, I can not flash my phone because it won't charge properly... When I connect it to the charger, it will charge and I see the red light. After a while, the battery drains and gets empty, while still seeing the red light. I put it on the charger all night and it was totally empty when I checked this morning. Do you have an idea how I can deal with this?
If you can get into philz recovery. Leave it there. The battery charges inside of it.
And yes always boot.img of the rom.zip you want to install.
Sent from my HTC One X using XDA Premium 4 mobile app
I can not flash Philz yet because the bootloader is still locked. It has charged enough now, but when I try to unlock it by typing 'fastboot flash unlock unlock_code.bin' it says:
Sending 'unlock' (0 KB)... OKAY [0.009]
Writing 'unlock' ... FAILED (remote: not allowed)
finished. Total time: 0.219s
Could it be that I need to get a new unlock_code.bin? Now I use the same one as when I first tried to lock it. Or do I need to type another command for reunlocking? The status on my phone still says relocked...
Command is not correct
Fastboot flash unlocktoken unlock_code.bin
Sent from my HTC One X using XDA Premium 4 mobile app
Thank you so much, it worked!
CM10.2 is installed, I've got only one more problem...
When I boot it, and pass the setup wizard, the phone keeps popping up the same message:
Unfortunately, Setup Wizard has stopped. Every second it pops up.
I can acces various programs, so that works, except for that message.
Do you happen to know a solution for that as well?
Anyway, thank you again for your help!
Installed gapps ? The correct one ? Made a proper full wipe full before installing the rom !
Sent from my HTC One X using XDA Premium 4 mobile app
Yes, I got it to work. Now I've got a new problem... For one afternoon, my phone worked perfectly, but since that evening, now two days ago, I can't connect with my mobile services. I can't call, go on internet (only via WiFi), and when I try to create a new APN, it doesn't show. I tried it with two different SIM cards, neither work. Also my battery drains very fast and when I take a look at my battery app it doesn't show Google play services from which I heard is a common cause
Sent from my EndeavorU using xda app-developers app