[Q] N7100 only Stock recovery working boot loop happening - Galaxy Note II Q&A, Help & Troubleshooting

I am looking for N7100 OTA update file to flash stock ROM because my Device is not detecting in ODIN. Reinstalled driver several time. Alos after boot i am stuck with CM12 logo. I already tried factory reset/wipe cache from stock recovery. :crying:

rahulkiit said:
I am looking for N7100 OTA update file to flash stock ROM because my Device is not detecting in ODIN. Reinstalled driver several time. Alos after boot i am stuck with CM12 logo. I already tried factory reset/wipe cache from stock recovery. :crying:
Click to expand...
Click to collapse
search here.
Do you use download mode to connect in odin? Try different USB cable, PC or even Odin ver.

Related

HELP.Bricked tab3 8 SM-T310?

Please help because I messed up my tab3 8.
I was using the BinDroid ROM and today I decided to flash this ROM [JB/KK][4.3.1/4.4.2] CyanogenMod unofficial builds.
I started flashing the Philz recovery via Odin. After that I have bootloop.
I tried to flash stock firmware via Odin and still have bootloop.
Is there any way to fix this?
I am able to enter recovery or download mode.
spirosoupia said:
Please help because I messed up my tab3 8.
I was using the BinDroid ROM and today I decided to flash this ROM [JB/KK][4.3.1/4.4.2] CyanogenMod unofficial builds.
I started flashing the Philz recovery via Odin. After that I have bootloop.
I tried to flash stock firmware via Odin and still have bootloop.
Is there any way to fix this?
I am able to enter recovery or download mode.
Click to expand...
Click to collapse
1.Do you boot into the Philz recovery or the one you had previous to Odin the recovery? If its philz try wiping data and cache and rebooting.
2.Next check if the md5 of your download matches and you have downloaded the correct zip for your device (lt01wifi). If so factory data reset and then flash again.
3.Make sure you are using ODIN correctly. A good guide can be found here http://forums.androidcentral.com/ambassador-guides-tips-how-tos/300296-guide-samsung-how-flash-stock-rom-via-odin.html
I flashed the stock firmware again and still bootloop.
Then I did a factory reset via the recovery and that was it!!!! My tablet is fixed!!!
I pass the Philz recovery then and root the tablet.
So now I am with the stock ROM and rooted. Thank you!!!
Is your data lost after flashed ?
Image, mp3, video etc..

[Q] Android 4.3 update via odin fail

Hello everyone,
I decided today to try and switch from aokp android 4.4.2 rom back to the official 4.3 update. I Factory reset and cleared cache, and then flashed the .tar file via odin, and it said it passed. Unfortunately, it gets to the flashing Samsung logo, and gets stuck there.. any suggestions on how to fix this?
deanfranks21 said:
Hello everyone,
I decided today to try and switch from aokp android 4.4.2 rom back to the official 4.3 update. I Factory reset and cleared cache, and then flashed the .tar file via odin, and it said it passed. Unfortunately, it gets to the flashing Samsung logo, and gets stuck there.. any suggestions on how to fix this?
Click to expand...
Click to collapse
What phone model and carrier do you use and where did you find an Odin flashable file for 4.3 JB? Do you have custom recovery installed on your phone?
Larry2999 said:
What phone model and carrier do you use and where did you find an Odin flashable file for 4.3 JB? Do you have custom recovery installed on your phone?
Click to expand...
Click to collapse
I have a bell SGH-I747M, I got the zip off of sam mobile, and I did, until I flashed the rom through Odin and it removed root and cwm
deanfranks21 said:
I have a bell SGH-I747M, I got the zip off of sam mobile, and I did, until I flashed the rom through Odin and it removed root and cwm
Click to expand...
Click to collapse
The 4.3 ROM would have been better flashed as a zip file via custom recovery than Odin. I would suggest you first try booting into recovery mode and doing a hard wipe/reset. If this does not work, then you may try reinstalling the zip. Boot into download mode and flash custom recovery (cwm or TWRP) via Odin. Also copy the zip file you earlier downloaded (unextracted) onto an SDHC card or you may try another download via this link <http://www.androidfilehost.com/?fid=23269279319199494>. If you are able to successfully flash custom recovery, don't allow the phone to reboot but remove the battery and insert the card. Then boot into custom recovery and flash the zip from the SDHC card. Clear the cache and reset and, hopefully, your phone will be back in business.

Stuck on Samsung Logo

Sup!
so I did a full factory data reset (Philz Touch 5) wiped dalvik and went to storage and mounts to properly factory reset it. then rebooted, and now I am stuck on the Samsung Logo. tried flashing Stock Firmware with Odin but my PC can't find the proper drivers (format my pc).
so does anyone know how to fix this problem? I had stock ROM and running on 4.3 Jellybean. Can still boot into Download Mode & Philz Touch 5
FTBLLKiD said:
Sup!
so I did a full factory data reset (Philz Touch 5) wiped dalvik and went to storage and mounts to properly factory reset it. then rebooted, and now I am stuck on the Samsung Logo. tried flashing Stock Firmware with Odin but my PC can't find the proper drivers (format my pc).
so does anyone know how to fix this problem? I had stock ROM and running on 4.3 Jellybean. Can still boot into Download Mode & Philz Touch 5
Click to expand...
Click to collapse
Hi,
Did you install Kies software on your computer? The drivers are included in the software. With that done, Odin should detect your phone (don't forget to boot on download mode).
Let me know if it helped....

[Q] Urgent Help! Bricked Samsung Galaxy Tab 3 10in

Hello all i have bricked my Samsung Galaxy tab 3
I have tried rooting but it ended up giving me a boot loop
Nothing has worked, I have tried flashing a stock ROM, it was unsuccessful, i have tried a rooted ROM, it was successful though i was still stuck in a boot loop, so i flashed Philz recovery and that worked but it didn't clear anything.
I'm currently downloading another Stock ROM and I hope it works.
I also tried adb and that didnt work either.
How can I stock recover this device.
Battlecraftiser said:
Hello all i have bricked my Samsung Galaxy tab 3
I have tried rooting but it ended up giving me a boot loop
Nothing has worked, I have tried flashing a stock ROM, it was unsuccessful, i have tried a rooted ROM, it was successful though i was still stuck in a boot loop, so i flashed Philz recovery and that worked but it didn't clear anything.
I'm currently downloading another Stock ROM and I hope it works.
I also tried adb and that didnt work either.
How can I stock recover this device.
Click to expand...
Click to collapse
Have you tried using Odin to return to stock? don't forget to "uncheck" auto reboot. After flash completes, shut down, then restart.
Here's a thread for using Odin to return to stock
...and wipe/format system, data, cache etc before flashing
Which version? P5220(the LTE version) P5210(wifi only version) p5200 3g version
you can try out odin, flash everything including stock rom and recovery. Start everything all over.

[Q] Error on downgrade from CM12

After installing the CM12, I decided to downgrade to the stock firmware. However, Im stuck at the Samsung logo and cant access the recovery mode.
Does anyone has a solucion?
Thanks
Flash stock with odin
canjica said:
After installing the CM12, I decided to downgrade to the stock firmware. However, Im stuck at the Samsung logo and cant access the recovery mode.
Does anyone has a solucion?
Thanks
Click to expand...
Click to collapse
When I came back to stock too, I had to do a factory reset after flash it.
Yeah all you needed to do was wipe system, and all the caches and also data. Then flash in odin

Categories

Resources