looking for some suggestions as to what I can to to correct these issues. I have a 210R that I screwed up probably flashed something I should not have... to restore I went to sam mobil and downloaded the latest firmware ( T210RUEU0COB1), installed using Oden and restored the Tab. since I have done this (and yes I redownloaded the firmware and reinstalled to make sure it was a good file and installation) the tab now will boot up fine, but will come up with the error messages Process com.androis.systemui has stopped and often com.sec.android.flashbarservice has stopped as well clicking ok will sometimes let me continue, other times will simply reboot. If it lets me continue whatever app I am using will quickly stop as well and the tab reboots. in addition to this the WiFi barely recieves any signal unless I am almost on top of the router. it is currently stock. Any suggestions or help will be greatly appreciated.
Having the same problems minus wifi issues
jdsatyr said:
looking for some suggestions as to what I can to to correct these issues. I have a 210R that I screwed up probably flashed something I should not have... to restore I went to sam mobil and downloaded the latest firmware ( T210RUEU0COB1), installed using Oden and restored the Tab. since I have done this (and yes I redownloaded the firmware and reinstalled to make sure it was a good file and installation) the tab now will boot up fine, but will come up with the error messages Process com.androis.systemui has stopped and often com.sec.android.flashbarservice has stopped as well clicking ok will sometimes let me continue, other times will simply reboot. If it lets me continue whatever app I am using will quickly stop as well and the tab reboots. in addition to this the WiFi barely recieves any signal unless I am almost on top of the router. it is currently stock. Any suggestions or help will be greatly appreciated.
Click to expand...
Click to collapse
Dude my tablet is in the same state I use. The many reboots. All apps/process stopping for no reason. Funny thing is this started happening to me after I received an OTA update for 4.4.2 and flashed it. So basically the official update released by samsung messed up my phone. Somebody please respond with suggestions/solutions.
Sigh.... guess I'll just use it as a paperweight ..
Related
Okay so the other night i went and decided to flash the UK 2.2 firmware specifically 3.4.2.155 then flashed Pay's ROM and it went well. Instantly fell in love with how smooth everything ran without blurr. However.. as everyone warned I lost 3G and Wifi Calling.... and I love those things.
Did the adb push of those 3G fix files for 6.19 T-Mobile that user rob_t put together...http://forum.xda-developers.com/showthread.php?t=897445
However after rebooting i was simply stuck on moto logo... the wretched bootloop... and was forced to go back to US froyo...which after using Pay's rom just seemed unbearably slow...
Any reason that the 3G fix only seemed to bootloop me?
I really want Pay's ROM but I must have 3G
http://forum.xda-developers.com/showthread.php?t=944258
try these fixes dude...
i using pays rom and 3g is normally working.
phanikiranss said:
http://forum.xda-developers.com/showthread.php?t=944258
try these fixes dude...
Click to expand...
Click to collapse
I finally got it working. These files were a big help since I didnt have to mess with adb myself.. (I suck at command script)
I am running jboogies ginger now... and its pretty awesome but no built in tether like Pay's rom....
Ill try it on for a week.
Thanks for pointing me in the right way again
If this thread is still open - can someone please help me. I am on Pays rom and used the zip patch, so I have data working. However, market works intermittently, and I get an error message with roughly half the data downloaded and have to keep pressing 'retry' to get everything loaded. Also, when downloading an app, the first time or even a few times, it downloads the data but doesn't initiate the install. After I click 'download' it goes back to the market screen (as usual), and I have to quickly open the link for the app that I'm downloading so it brings up the app homepage and then it will actually download/install.
Is this normal? I initially didn't wipe after flashing the rom per Pays instructions, and since have wiped and reinstalled the patch to see if that worked...but it hasn't and still doing the above.
Anyone have the same problem? Any fix? Thanks in advance for any help! Oh, and same for browser internet...keep getting error message. And I used the APN settings that is on wife's stock tmous defy.
darule_2011 said:
If this thread is still open - can someone please help me. I am on Pays rom and used the zip patch, so I have data working. However, market works intermittently, and I get an error message with roughly half the data downloaded and have to keep pressing 'retry' to get everything loaded. Also, when downloading an app, the first time or even a few times, it downloads the data but doesn't initiate the install. After I click 'download' it goes back to the market screen (as usual), and I have to quickly open the link for the app that I'm downloading so it brings up the app homepage and then it will actually download/install.
Is this normal? I initially didn't wipe after flashing the rom per Pays instructions, and since have wiped and reinstalled the patch to see if that worked...but it hasn't and still doing the above.
Anyone have the same problem? Any fix? Thanks in advance for any help! Oh, and same for browser internet...keep getting error message. And I used the APN settings that is on wife's stock tmous defy.
Click to expand...
Click to collapse
I would make a new thread I think your problem is much different than mine was and I think people will overlook your question on a resolved thread
ketonkss4 said:
I would make a new thread I think your problem is much different than mine was and I think people will overlook your question on a resolved thread
Click to expand...
Click to collapse
Ended up getting it resolved with that baseband changer on here (v3.1 worked as v3.0 wasn't working).
Thanks for the reply though...I kinda figured my post would be lost at sea given that the thread was in resolved status
Did you ever get it working on Pays or did you end up staying with jboogie?
My new T900 is having problem with WiFi unable to assosiate to AP.
Keeps coming back with AP error message.
Tried to apply forget to re-enter password, but didn't do the trick.
Chronological orders of mess I did tonight, to help troubleshooting:
1. Tablet is new, been runnign fine stock for 2 days.
2. Flashed openrecovery-twrp-2.7.1.0-viennaltexx.img.tar using ODIN.
3. Flashed CF-Auto-Root-v2wifi-v2wifixx-smt900 using ODIN.
4. Flashed openrecovery-twrp-2.8.0.0-v2wifixx.zip using ODIN.
5. Still working fine at this point.
6. Froze bloatwares.
7. Tablet came off its stand and fell on the table - <2" drop, just on 1 edge.
I didn't remember if the Wifi stopped working after the drop or the bloatware freezing.
Anyway, I defrosted all the bloats and it wasn't working still.
Finally did a factory reset, and it's still not working.
I highly doubt the problem came from the drop (more like a bump) on the table - that'd make this the least realible product I've ever owned.
I strongly suspect SW, but even factory reset doesn't seem to fix the problem.
I also checked my Wifi Router and it's not the problem.
Any suggestions or ideas would be appreciated.
Fixed by doing reflash to stock.
ODIN 3.09
T900UEUANI1_T900XARANI1_XAR.zip
Wifi works right away after this.
Closing thread.
Hello everyone I'm Italian and I have problems with my stock galaxy tab 3 7.0 T211.
Often when I turn on the tablet the process systemui crash, then while using, many other app randomly lock, and I must open them 2-3 times to be used in normal way.
It happens also that the tablet will block for a couple of seconds and restart it automatically, but restart is not normal but is much faster.
I tried to do a factory reset from recovery, I installed with odin before the stock firmware 4.1.2 (XXAMK6) and then the 4.4.2 (XXBNI1), but in all cases nothing, the tablet gave me the same problems, particularly the problem of the process are terminated .
It also happened that during the first configuration (language, time, wifi network password, etc.) the configuration process crash, and I had to start all over again. All this even though I had just installed the firmware with odin.
I do not know what to do, it seems to me absurd that despite I start from a clean base and I use odin to flash a stock rom the tablet gives these problems, I do not understand what could depend.
I hope you can help me, any help or advice is welcome.
Many thanks to all!
Been there, done that
midnighteight said:
Hello everyone I'm Italian and I have problems with my stock galaxy tab 3 7.0 T211.
Often when I turn on the tablet the process systemui crash, then while using, many other app randomly lock, and I must open them 2-3 times to be used in normal way.
It happens also that the tablet will block for a couple of seconds and restart it automatically, but restart is not normal but is much faster.
I tried to do a factory reset from recovery, I installed with odin before the stock firmware 4.1.2 (XXAMK6) and then the 4.4.2 (XXBNI1), but in all cases nothing, the tablet gave me the same problems, particularly the problem of the process are terminated .
It also happened that during the first configuration (language, time, wifi network password, etc.) the configuration process crash, and I had to start all over again. All this even though I had just installed the firmware with odin.
I do not know what to do, it seems to me absurd that despite I start from a clean base and I use odin to flash a stock rom the tablet gives these problems, I do not understand what could depend.
I hope you can help me, any help or advice is welcome.
Many thanks to all!
Click to expand...
Click to collapse
This happened with me too but only after updating to KitKat 4.4.2 with Odin, I tried a couple of times and even used firmwares for other regions (mine is international version unlocked so it should work with no problems), I then Initialized the device using Kies 3 to the latest firmware available for my region for the SM-T211, it went OK, I still get crashes, I mean the problem hasn't totally been solved, but it's much much less crashes now than before when device was flashed with Odin (may I say that it was the same stock rom with the same build number from both Odin and Kies 3, still the one from Kies 3 was much more stable)
Here's the story. I purchased a factory refurb'd Tab Pro 10.1 (SM-T520NZKAXAR) on Woot a few weeks back. I live in Canada, but it is a USA tablet, if that matters. It came with a 90-day Samsung warranty. As soon as I got it, I started looking at custom ROMs. I have experience with custom ROMs on my HTC One m8 (and old m7), but not with any Samsung devices. I wish I had kept it stock for a few weeks first to check it out, but here we are.
I created a nandroid backup of the stock firmware, however I quickly deleted it during a wipe when flashing my first custom ROM, which was GraveD's v3.0. It seemed to go OK, but then it would start to freeze up and reboot on it's own. This seemed to happen mostly under load, and especially when trying to install apps from the Play store. I tried going back to the stock kernel, thinking that could be the problem. It stopped the crashing, but then wifi wouldn't work. So I could choose between having a tablet that crashes all the time, and has difficulty installing apps, or one without wifi. Both were basically useless.
I tried installing another custom ROM, GigaWatts Pro. Again, flashing seemed to go well, and the ROM also seemed to work very nicely for a couple of days. No random reboots, and wifi worked great. I spent a few days downloading all of my apps and getting things set up the way I like, when yesterday something went wrong. Perhaps the tablet lost its root (is that possible?). All of a sudden, apps are crashing all over the place (Unfortunately, [insert app name] has stopped). Titanium backup hangs at "Asking for root...". Installing apps is also difficult again. The tab doesn't reboot on it's own, but Play Services crashes constantly. Whenever I try to get into developer options, the Settings app crashes. I'm not even 100% sure USB debugging is enabled right now, although I'm still able to flash using ODIN.
I tried doing a factory reset and re-installing GigaWatts. Same problems. Tried making sure the root was OK. Same problems. I've tried using twrp 2.8.0.0 as well as 2.7.1.0 with no luck.
Right now, I've downloaded the stock firmware for Canada T520UEUANI1 4.4.2 (although the tab was bought from a USA site). I assume this also installs it's own Kernel. It shows Kernel version:
3.4.39-2776001
[email protected] #1
Mon Sep 15 17:44:40 KST 2014
I'm experiencing the same problems. Google Play Newsstand crashes every 10 minutes or so. Settings is almost useless. Installing apps is problematic.
Can anybody tell me if there's something I'm missing? Anything left to try? Does it sound like a hardware/ROM/kernel problem? If it's hardware, can I still utilize the Samsung warranty after trying to flash custom ROMs? I'm going to try to download another Cellular South stock ROM, but it seems like the problems are persisting regardless of which ROM i have installed, so I think it's something else (kernel or hardware-related).
Any help is GREATLY appreciated. My new tablet is basically useless, and I've run out of ideas.
Try this latest firmware since you mentioned your tablet is the XAR model the firmware should be cellular south (wifi)
http://www.sammobile.com/firmwares/download/39630/T520UEUANK1_T520XARANK1_XAR.zip/
If that doesn't help then it could just be a bad tablet .
(btw when you flashed a custom rom you probably tripped the hardware knox flag and voided any warranty it had, I guess you could play dumb if they ask and say it came like that since it was refurbished, and hope they still repair/replace it)
I just tried the USA cellular south firmware. Still experiencing the exact same issues. I'm completely out of ideas. Does anyone else have any ideas? Otherwise I'm going to have to try warranty service and hope for the best. Is there anything I can do to restore the Knox flag before I send it in?
Also, in download mode the tab is recognizing the system as custom. Is this normal after flashing a stock image?
So do a factory reset in recovery, and clear the cache also. Then load the cellular South file thru Odin. Then factory reset again. See if this clears your problems.
k8108 said:
So do a factory reset in recovery, and clear the cache also. Then load the cellular South file thru Odin. Then factory reset again. See if this clears your problems.
Click to expand...
Click to collapse
I've tried the Cellular South firmware to no avail. I'll be trying to warranty the tablet now. Fingers crossed!
Hey, guys. Hopefully one of you can help me. I've been having problems with my Galaxy tab 3 (Sprint version) all damn day and I figured I'd ask for help before I utterly destroy it.
So, I've been trying to restore the tablet to factory and nothing I do is working. It was rooted in the past but it was all undone before it was given to me a couple of years ago.
Anyway, I've downloaded the stock os from here, sammobile, and another source, but no matter which I use I seem to run into the same issues. (All flashed with odin 3.12)
1.) When resetting the tablet to factory before or after flashing, I almost constantly seem to get the message, "process system isn't responding."
2.) Keyboard seems unresponsive.
3.) Wifi doesn't seem to stay on, doesn't even let me get to where I can scan for signals.
Any help would be highly appreciated.
Sorry!
Can't help just because I don't own a T217S but I own a T210 instead!
They are two different models!
So yeah!
Good luck with what you are doing!
Cheers,
Diamond26
I have the same problem - Process system isn't responding Do you want to close it? I can't reply because the touch screen isn't working now. Anyone know what I should do?
What rom do you have on now?