[Q] Oddly Bricked Kindle Fire (HELP!) - Kindle Fire Q&A, Help & Troubleshooting

Before I begin, trust me when I say I have scurried through dozens of Google results, forums, blogs, YouTube videos, FAQ's and other things trying to find out how to unbrick this thing. I have a Kindle Fire first gen which I rooted using Kindle Fire Utility through superuser 3 days ago. All was well, as I had google play and an innovative new launcher. After downloading a few apps, I thought that I had finally made the Kindle the fully-functional Android tablet I had desired. However, after a few hours of seamless use, the Kindle decided to freeze on me. Holding the power button still brought up the "Do you wish to power down your Kindle?" notification, and I shut it down, planning on restarting it. However, when I turned it back on, it would not get past the animated Kindle Fire logo. The weird part was, I could still hear notification tones. I was using my phone to DM on Twitter, and when I would get a message back, I could hear the twitter notification on my Kindle. (No, I was not mistaking it for the phone). After a while, I could hear that sound it makes when the battery was about to die. I plugged it in, and after two hours I unplugged it, held the power button to shut it down, and started searching google for answers. I was advised to use the Kindle Fire Utility to launch it in fastboot mode, which only restars the Kindle with no success. I have tried all options on the KF utility, even Permaroot. If I install TWRP recovery, it gets stuck on waiting for device. On most options, it gets stuck on waiting for device. (I have tried all the unplugging, unpowering options I saw). The computer makes a sound when the KF is plugged in, but it doesn't come up on the devices with removeable storage tab. I have all drivers installed, it is ADB enabled through the device manager, I have the Java Developer Kit, as well as Android SDK. The only thing I can get any utility to do (I have tried many such as Kindle Brick, SuperOneClick,etc) is restart the Kindle as if I did it myself. It still makes all the notification tones I mentioned earlier. One thing I have noticed, though, is that when the Kindle is 10 seconds from dying, the Unlock Screen will appear with no response. I have tried several times to let it get to that point, then quickly plug it in, but no sucess. It just restarts on the same boot screen. I have no idea what to do. I'm not a developer by any means, but I'm good with following directions I'm given to mess with computers and such. I don't have much knowledge of the command prompt, either. I just made this post as a last resort. Someone please help. (Running Windows 10 techncinal preview on a Windows 8, 64-bit laptop if that helps)

Do you know which system version?
Kindle Fire Utility doesn't root the latest system version.
Guessing that you rooted older version, then Kindle downloaded and installed newer system version, it would not ask for permission.
New system version may not have installed correctly.
If system was updated, Kindle lost root.
When powered off, connect to wall charger, does it charge?
Couple of options
See if you can force fastboot mode with adb commands
Or buy a fastboot cable
Then flash fff and twrp so you can reinstall stock rom
See
[6.3.3] Flashing FFF and TWRP without Fastboot Cable
Sent from my XT912 using Tapatalk

Related

[Q] Need help with rooted(?) possibly bricked kindle fire

Back story: I purchased a used Kindle Fire on Ebay about a week ago, not knowing that it had been rooted. I was looking for a standard Kindle fire for my son so he would stop using my tablet (lol) and the parental controls are better and more books and so on... none the less when I got it I noticed that it booted differently (I had a kindle fire prior) and it booted into Android. I have had problems with trying to be able to get my computer to recognize it. It looks for missing drivers and I have been all frustrated, but figured that we would just have to download off of it, well, we went on a trip this past weekend (11 hours) and my son wanted to watch a movie, turned it on and it wont boot past the yellow triangle now. I have tried a hard reboot, I have tried to turn it on and hold it and watch for the orange light to no avail. The light is either green or its powered off.
I don know what to do at this point? I cant hook it to my computer (wont even recognize as an F drive or mass media) and I cant boot past the orange triangle. Yes, I am a newb (apologies) but a very frustrated one if that counts?
Sadly I think the thing is bricked and I will take a $150 hit (ugh)
No worries, your Kindle isn't bricked, it's just stuck in the wrong bootmode, which is easy to fix if you know what you are doing.
I could give you links to various guides and tutorials but it seems that it would be a lot to handle all at once for someone who knows nothing about Android and probably has no intention to.
Changing bootmodes is very easy, but getting everything set up to change bootmodes can be tricky, especially on Windows. It seems to me that you want the device back to stock (not rooted, stock bootloader, etc.), which may be a little less troublesome for you in the long run.
Hold the power button for 10-15 seconds to ensure it is completely powered off, then turn it on again.
When you see the yellow triangle, hold the power button until it turns orange and release. That should get you into the custom recovery that has been installed. When it boots into that recovery, describe what you see (i.e. recovery version, color scheme, etc.)
Yes, you would be correct in that I just want it stock, sure Android is great but my son is 4 and he just needs the basics for his books and angry birds lol. So, I attempted what you said, powered off all of the way and turned back on, as soon as I see the yellow triangle I hold the button and it wont turn orange, it will just power back off. I used to be able to touch the screen when the yellow triangle came up and it would take me into some menu (TWRP?) but it wont do that anymore either, its just remains either off or on the yellow triangle.
soupmagnet said:
No worries, your Kindle isn't bricked, it's just stuck in the wrong bootmode, which is easy to fix if you know what you are doing.
I could give you links to various guides and tutorials but it seems that it would be a lot to handle all at once for someone who knows nothing about Android and probably has no intention to.
Changing bootmodes is very easy, but getting everything set up to change bootmodes can be tricky, especially on Windows. It seems to me that you want the device back to stock (not rooted, stock bootloader, etc.), which may be a little less troublesome for you in the long run.
Hold the power button for 10-15 seconds to ensure it is completely powered off, then turn it on again.
When you see the yellow triangle, hold the power button until it turns orange and release. That should get you into the custom recovery that has been installed. When it boots into that recovery, describe what you see (i.e. recovery version, color scheme, etc.)
Click to expand...
Click to collapse
Well you're going to need a few things first.
The Kindle Fire Software Update
The Kindle Fire Utility
And you need to get a custom recovery. TWRP is kind of on the fritz right now so getting it from the TWRP website is probably not your best option. You can still find a working one with the smirkit but you'll have to extract it yourself. It will be titled "recovery_twrp_2.x.img". COTR will work just as well but be sure you get the .img
Extract the KFU and run the install_drivers.bat
Place your custom recovery.img in the Kindle Fire Utilitiy's " tools" folder
Shift + Right-click on the Kindle Fire Utilitiy's "tools" and select "Open command window here". In the window that opens up enter the following commands:
Code:
fastboot flash recovery name_of_recovery.img
fastboot oem idme bootmode 5001
fastboot reboot
I'll leave it at that until you can confirm you have recovery installed and you're booted into it.
I would if I could... lol... I can not get my computer to recognize the Kindle as either a kindle or a mass media drive... when I plug it in it will say that I need kindle drivers (which I am told there is no such thing as) and it does not show up as a drive either. I am to the point that I am about ready to throw it on craigslist for 50 bucks, take the 100 plus loss and start all over with a brand new one... damn you ebay! Lol
soupmagnet said:
Well you're going to need a few things first.
The Kindle Fire Software Update
The Kindle Fire Utility
And you need to get a custom recovery. TWRP is kind of on the fritz right now so getting it from the TWRP website is probably not your best option. You can still find a working one with the smirkit but you'll have to extract it yourself. It will be titled "recovery_twrp_2.x.img". COTR will work just as well but be sure you get the .img
Extract the KFU and run the install_drivers.bat
Place your custom recovery.img in the Kindle Fire Utilitiy's " tools" folder
Shift + Right-click on the Kindle Fire Utilitiy's "tools" and select "Open command window here". In the window that opens up enter the following commands:
Code:
fastboot flash recovery name_of_recovery.img
fastboot oem idme bootmode 5001
fastboot reboot
I'll leave it at that until you can confirm you have recovery installed and you're booted into it.
Click to expand...
Click to collapse
Save yourself the trouble mail it to me I will fix it then you reimburse me the return postage or better yet I can show you how to fix it without even mailing it . 150 for a first gen kindle is pretty high you kinda already got taken.
[email protected] said:
I would if I could... lol... I can not get my computer to recognize the Kindle as either a kindle or a mass media drive... when I plug it in it will say that I need kindle drivers (which I am told there is no such thing as) and it does not show up as a drive either. I am to the point that I am about ready to throw it on craigslist for 50 bucks, take the 100 plus loss and start all over with a brand new one... damn you ebay! Lol
Click to expand...
Click to collapse
Pay attention to what I said previously...
soupmagnet said:
Extract the KFU and run the install_drivers.bat
Click to expand...
Click to collapse
Clearly, there are drivers for the Kindle Fire and they are needed to fix your device.
I think I am officially over this thing... I downloaded the drivers and went to plug in the kindle fire to the computer and now its just looping the triangle... it turns on for a second and then off and on and off and so on... UGHHHHHH....
soupmagnet said:
Pay attention to what I said previously...
Clearly, there are drivers for the Kindle Fire and they are needed to fix your device.
Click to expand...
Click to collapse
You let the battery die. I won't go into how it happened but to get it to charge, you need to...
With the device turned off, Plug the device into USB and hold the power button until it shuts off again. If you can get it to stay off, leave it plugged in for about half a day and turn it on again.

[Q] Kindle Fire Static Logo Fastboot Stuck

I can get around in both windows and linux. I have rooted, flashed and modded a smartphone before (Samsung Galaxy Express) successfully.
This should be an easy one for some of you to diagnose. A fresh stock Kindle Fire (6.3.2). Trying to install KFU v0.9.6 from a Win7 (also have various flavors of linux, ubuntu, arch, debian, etc available to use if need be). ran install_drivers.bat without any problems, device showed up and was recognized. Ran run.bat. put it in fastboot mode. Kindle Fire rebooted into the "Kindle Fire" White/Orange static logo and is stuck. No animation, no powerbutton response, can't turn it off, unknown device in Win7, adb and fastboot commands return no devices.
From reading the many beginner guides and unbricking posts, I was lead to believe that I needed to put this unit in fastbootmode to do any custom work with the device, and seeing that it's #1 on the menu list of the KFU I thought this was a pre-requisite before installing anything else. Apparently this is not the case. The device comes up as a USB Unknown Device (Code 43) now, and KFU can not find the device and is waiting for the device. Can't do anything. The only clue I was able to read was possibly letting the power drain. It was full charged so I will have to wait for a while. In the meantime, I figured I would hit up the forum to see if anyone has a better suggestion.
How do I get my Kindle Fire out of FastBoot Mode?
I am right there too...
BlushNine said:
I can get around in both windows and linux. I have rooted, flashed and modded a smartphone before (Samsung Galaxy Express) successfully.
This should be an easy one for some of you to diagnose. A fresh stock Kindle Fire (6.3.2). Trying to install KFU v0.9.6 from a Win7 (also have various flavors of linux, ubuntu, arch, debian, etc available to use if need be). ran install_drivers.bat without any problems, device showed up and was recognized. Ran run.bat. put it in fastboot mode. Kindle Fire rebooted into the "Kindle Fire" White/Orange static logo and is stuck. No animation, no powerbutton response, can't turn it off, unknown device in Win7, adb and fastboot commands return no devices.
From reading the many beginner guides and unbricking posts, I was lead to believe that I needed to put this unit in fastbootmode to do any custom work with the device, and seeing that it's #1 on the menu list of the KFU I thought this was a pre-requisite before installing anything else. Apparently this is not the case. The device comes up as a USB Unknown Device (Code 43) now, and KFU can not find the device and is waiting for the device. Can't do anything. The only clue I was able to read was possibly letting the power drain. It was full charged so I will have to wait for a while. In the meantime, I figured I would hit up the forum to see if anyone has a better suggestion.
How do I get my Kindle Fire out of FastBoot Mode?
Click to expand...
Click to collapse
I am right there too...
I ordered a Factory Cable and it should be in any day now. . . .
That is what I am doing and crossing my fingers . . .
serendipityguy said:
I am right there too...
I ordered a Factory Cable and it should be in any day now. . . .
That is what I am doing and crossing my fingers . . .
Click to expand...
Click to collapse
For anyone who has run into the same problem, this is how I fixed my problem
[1] Power off the Kindle Fire and unplug. Hold down the power button for more than 10seconds. There seems to be some variance with how long you have to hold the button down.
[2] Use the Kindle Fire Utility "run.bat" in Windows. Without the Kindle Fire device plugged in, the ADB Status will be Offline and Boot Status unknown, obviously. Go into boot menu [1] and select Normal Boot [1]. It will tell you <waiting for device>.
[3] Plug in Kindle Fire device.
[4] It should reset the Kindle Fire to normal working status.
PS. I tried the power drain, but it as soon as I supplied power back to the unit it resumed its stuck boot loop condition, so nothing changed. The reason it took so long to figure out this problem was (a) I didn't know you had to hold down the power button so long. 3-5 seconds is typical for most devices to perform a hard shutdown. (b) You have to set the Kindle Fire Utility waiting to catch the Kindle Fire device booting, if it's stuck in this condition. You can't just plug it in and run the KFU while its stuck on that screen.
Also, DO NOT SELECT [1] and FastBoot Mode on a fresh stock unmodified Kindle Fire. The other install menu selections in KFU will automatically Fastboot in order to perform what they need to do.
Hope this helps others.

[Q] Fire HD 8.9 stuck at first loading image, USB not functioning

Hi there,
All was going well with my Fire HD 8.9, I rooted it, had the 2nd bootloader installed and was trying to install CM 11 before I got an error message saying that the jem version was the one I needed. I couldn't get my computer to recognise the the Kindle whilst in TWRP, so thought that I'd have to restore from the backup I made (of the stock Kindle OS and settings) to be able to transfer the version of CM that I needed. The backup seemed to work, but it hasn't in fact.
I turn on the Kindle and it gets stuck at the very first image of the logo, with NO animation
I'm unable to get back into TWRP
I can turn the kindle on and off but that's it
I can't use any recovery programs because my PC doesn't recognise the Kindle
I uninstalled and reinstalled the adb drivers, but when I connect the Kindle, my PC plays the 'Device Connected' then 'Device disconnected' sounds in quick succession, making the installation of any drivers fail
It's as though there's a brief second or two when USB works on the Kindle in terms of my PC knowing something is there, but then the USB disconnect noise plays
I only got it a day ago (managed to mess it up very quickly somehow!), so I could always try returning it if needs be, but hopefully that won't be necessary. Any ideas? Thanks in advance
EDIT - I can get the device to come up with fastboot mode and then the computer recognises it as an Adb device, but don't know where to go from there.
I would try to fix it from recovery if possible, it is way easier than having to do the process over again. You do know how to get it back into recovery right? Hold down volume up right after you power it on, just keep holding it even after kindle logo turns blue until you see the twrp logo. If that doesn't work, I would use kindle fire first aid to restore it and start over, but if you can get it into recovery then you can simply push a ROM onto it via adb.
Sent from my Amazon Kindle Fire HD using Tapatalk
stunts513 said:
I would try to fix it from recovery if possible, it is way easier than having to do the process over again. You do know how to get it back into recovery right? Hold down volume up right after you power it on, just keep holding it even after kindle logo turns blue until you see the twrp logo. If that doesn't work, I would use kindle fire first aid to restore it and start over, but if you can get it into recovery then you can simply push a ROM onto it via adb.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply. I actually managed to fix it in the end by using the fast boot command and then connecting the Kindle, then using the SR tool to erase user data and cache, before flashing the boot and recovery imgs (just saying in case anyone googles and this comes up and it might help).

[Q] Kindle fire HD 8.9 will not boot, can not see in my computer

I can not get my wife's fire HD 8.9 to boot. When I turn it on the Kindle Fire screen appears for about 5 seconds, then the Kindle Fire goes out, but the screen is still backlit.
This device is completely stock with no modifications. It did this when I turned it on one day, no previous problems.
I tried holding the power button down for up to 2 min. After I hold the button for 10 seconds the backlight goes out and the kindle is completely off. I tried letting the battery go completely dead, then charging it for several hours with no change. I tried running fastboot, but it is stuck at <waiting for device>. My computer does not see it at all. I do hear the chime that something was plugged into the computer immediately followed by the chime that it was disconnected, but nothing shows up in my computer at all.
Is there any hope for this Kindle, or is it bricked for good?
So I assume you're on windows. That beeb you hear is the fastboot mode you need to load drivers really quickly during that beeb. At that point fastboot shoukd work and you can issue a command to get into the factory restore.
I got it working again.
The problem was simple, I did not have any drivers installed on my computer for the kindle (I have never plugged it into this computer before it would not boot). I found the drivers to download here: http://forum.xda-developers.com/showthread.php?t=1890413
I was then able to get it into fastboot and recover it with instructions from this thread: http://forum.xda-developers.com/showthread.php?t=2011126

Kindle Fire Hdx 8.9 4th gen stuck on boot / driver woes

I have a Windows 10 PC and a Kindle Fire HDX 8.9 that I purchased about 2 years ago. Up until the past few days I was a very basic user. Just spotify, web browsing and some games. The most advanced things I did on it were install some apk files from the internet and make it so the screen was always on in the secret developer options menu. Up until Monday I had no intentions of rooting my tablet or doing any high level tech wizardry with it.
But the past few weeks I have been noticing significant performance decreases in my kindle. Apps crashing, screen freezing, slow performance. I didn't think much of it, I figured I just had too many terrible games on it. On Friday morning it crashed while I was using it and attempted to boot back up but with the [fastboot] text under the word amazon. It got stuck on this screen, restarting it just brought it back to this, attempting to hold the power button and the volume up button didn't appear to do anything either. Eventually after restarting it about 20 times it booted normal for whatever reason. After this it worked normal for another day and then it crashed again and booted with the [fastboot] text. I read up more on fastboot and various kindle fire issues and jammed restarts until it randomly worked again.
This time I when it was working I tried restoring it to factory default in case something I had done or added was the cause of these boot loops or whatever. I also went into developer options and turned on usb debugging since my reading made it seem like that was pretty necessary.
It crashed and restarted again Monday morning but it didn't get stuck in fastboot this time, it just got stuck on the word amazon. So I installed the various tools and drivers I have read about on here and I have been doing my best to try and make it work again. But as someone with zero experience with this sort of thing I have hit a wall.
When I first hooked it up last night I set the driver to the "adb interface driver", I got adb to see the device and I was able to execute some commands to it. I made it reboot just to see if I could, it still stopped at the word amazon, and then I went to sleep. Today I turned on my computer and adb will not find the device. Apparently something changed overnight and windows will now only see the device as a standard mtp usb device. I have attempted to force it to change with the "update drivers -> browse my computer -> let me pick from a list -> Have disk " line. But when I choose the kindle drivers or the adb drivers it tells me they are incompatible. Unplugging and plugging back in doesn't do anything. Restarting doesn't do anything. Attempting to uninstall the drivers doesn't do anything. I don't know what is left or how to fix this so I can proceed. And honestly even after I get through this road block I have no idea what I should do to try and make my tablet operational again. So I am in need of some guidance. Is there anyone out there that can show me the way or at least get adb to see my device again?
horgenblorg said:
I have a Windows 10 PC and a Kindle Fire HDX 8.9 that I purchased about 2 years ago. Up until the past few days I was a very basic user. Just spotify, web browsing and some games. The most advanced things I did on it were install some apk files from the internet and make it so the screen was always on in the secret developer options menu. Up until Monday I had no intentions of rooting my tablet or doing any high level tech wizardry with it.
But the past few weeks I have been noticing significant performance decreases in my kindle. Apps crashing, screen freezing, slow performance. I didn't think much of it, I figured I just had too many terrible games on it. On Friday morning it crashed while I was using it and attempted to boot back up but with the [fastboot] text under the word amazon. It got stuck on this screen, restarting it just brought it back to this, attempting to hold the power button and the volume up button didn't appear to do anything either. Eventually after restarting it about 20 times it booted normal for whatever reason. After this it worked normal for another day and then it crashed again and booted with the [fastboot] text. I read up more on fastboot and various kindle fire issues and jammed restarts until it randomly worked again.
This time I when it was working I tried restoring it to factory default in case something I had done or added was the cause of these boot loops or whatever. I also went into developer options and turned on usb debugging since my reading made it seem like that was pretty necessary.
It crashed and restarted again Monday morning but it didn't get stuck in fastboot this time, it just got stuck on the word amazon. So I installed the various tools and drivers I have read about on here and I have been doing my best to try and make it work again. But as someone with zero experience with this sort of thing I have hit a wall.
When I first hooked it up last night I set the driver to the "adb interface driver", I got adb to see the device and I was able to execute some commands to it. I made it reboot just to see if I could, it still stopped at the word amazon, and then I went to sleep. Today I turned on my computer and adb will not find the device. Apparently something changed overnight and windows will now only see the device as a standard mtp usb device. I have attempted to force it to change with the "update drivers -> browse my computer -> let me pick from a list -> Have disk " line. But when I choose the kindle drivers or the adb drivers it tells me they are incompatible. Unplugging and plugging back in doesn't do anything. Restarting doesn't do anything. Attempting to uninstall the drivers doesn't do anything. I don't know what is left or how to fix this so I can proceed. And honestly even after I get through this road block I have no idea what I should do to try and make my tablet operational again. So I am in need of some guidance. Is there anyone out there that can show me the way or at least get adb to see my device again?
Click to expand...
Click to collapse
this is only for kindle fire 1 (2011)
there is a separate section for your device see
Fire Index: Which Amazon (Kindle) Fire Do I have?
for correct forum link
Sent from my XT1254 using XDA Labs

Categories

Resources