Don't know if someone posted it before, but you can download the latest firmware version stock for OG at this website:
http://lg-firmware-rom.com/
You just need to type your IMEI and, the download of the lastest version of the ROM specific for your OG model will start. For example, I have a Brazilian variant (LG-E977), so the firmware available to download is E977-v20A KitKat 4.4.2 retail version.
Before you ask me or start doubting, this is COMPLETELY safe and definitely not a scam. The website needs your IMEI so it can access LG servers and find out which is the specific OG variant and firmware version attached to each IMEI. For example, if you bought your OG with a carrier contract, then the firmware to be downloaded will be customized to that particular carrier.
As expected, you can use the well-known LG Flash Tool 2014 tool to flash firmware stock, it's working 100%.
Related
Hi,
I am not sure if this question has been asked before as I could not find anything similar here. If it has already been asked, then I would request the moderators to please point me there.
I have an AT&T Optimus G Pro (E980). It was running the stock rom (AT&T E980AT V10g). I then flashed the value pack from AT&T (AT&T E980AT V10k) which I downloaded by following the download link provided in thread http://forum.xda-developers.com/showthread.php?t=2438088
The flashing tool I used is the one that required the .tot file and the .dll file. Flashing was a success.
I found the value pack 10k to be laggy compared to the stock 10g. So, I wanted to try out a new rom and flashed a Korean one (SKT/SK TELECOM(KOREA) F240S V10w). I did that using the flash tool and the kdz file given in the same thread as stated above. Flashing was a success.
Now, I want to return again to the AT&T stock (AT&T E980AT V10g). But, when I am using the .tot file and the .dll file, the flashing tool is showing an error something about the device model being different and that I should check the .tot and .dll file. I cannot paste the exact error message right now as I am not at my desk but I can paste it later, if required.
Do I need to have a kdz file of the stock to carry out the flashing ? If yes, then where to find it as the stock firmware thread in this forum lists only the zipped up .tot for the AT&T stock rom.
Else, do I need a .dll for the F240S model and then use it along with the stock E980AT firmware to flash ? If yes, then where can I find the .dll file ?
Thanks for taking the time to read this post and thanks for helping out This can serve as a reference to someone who is looking for the same answer.
Regards.
sandyiscool said:
Hi,
I am not sure if this question has been asked before as I could not find anything similar here. If it has already been asked, then I would request the moderators to please point me there.
I have an AT&T Optimus G Pro (E980). It was running the stock rom (AT&T E980AT V10g). I then flashed the value pack from AT&T (AT&T E980AT V10k) which I downloaded by following the download link provided in thread http://forum.xda-developers.com/showthread.php?t=2438088
The flashing tool I used is the one that required the .tot file and the .dll file. Flashing was a success.
I found the value pack 10k to be laggy compared to the stock 10g. So, I wanted to try out a new rom and flashed a Korean one (SKT/SK TELECOM(KOREA) F240S V10w). I did that using the flash tool and the kdz file given in the same thread as stated above. Flashing was a success.
Now, I want to return again to the AT&T stock (AT&T E980AT V10g). But, when I am using the .tot file and the .dll file, the flashing tool is showing an error something about the device model being different and that I should check the .tot and .dll file. I cannot paste the exact error message right now as I am not at my desk but I can paste it later, if required.
Do I need to have a kdz file of the stock to carry out the flashing ? If yes, then where to find it as the stock firmware thread in this forum lists only the zipped up .tot for the AT&T stock rom.
Else, do I need a .dll for the F240S model and then use it along with the stock E980AT firmware to flash ? If yes, then where can I find the .dll file ?
Thanks for taking the time to read this post and thanks for helping out This can serve as a reference to someone who is looking for the same answer.
Regards.
Click to expand...
Click to collapse
Okay, I know exactly what your talking about!!, You have TWO Options!
1. (Easist) Change your Build Prop to be an E980 on your current rom and then try it
2. Flash the Telcel or Panama KDZ on your phone using LG Flashtools , and THEN flash the AT&T Version. That`s what I have had to do.
Heres a Guide in case you did not know http://forum.xda-developers.com/showthread.php?t=2420219 for flashing the Panama or Telcel rom.
hyelton said:
Okay, I know exactly what your talking about!!, You have TWO Options!
1. (Easist) Change your Build Prop to be an E980 on your current rom and then try it
2. Flash the Telcel or Panama KDZ on your phone using LG Flashtools , and THEN flash the AT&T Version. That`s what I have had to do.
Heres a Guide in case you did not know http://forum.xda-developers.com/showthread.php?t=2420219 for flashing the Panama or Telcel rom.
Click to expand...
Click to collapse
Hi,
Thanks for showing the way. I am currently on the Telcel rom and everything is working perfect, though I dislike the bloatware in this rom, be it as less as it is
I wonder if you can help with the following questions :
1) What is the difference between the Panama and Telcel (Mexico) Roms ? I assume both are based on E980H but Telcel should have more bloatware, as it is from a carrier. How much bloated is the Panama Rom ?
EDIT : Got the exact answer for the above question in thread http://forum.xda-developers.com/showthread.php?p=45722192&postcount=1
Panama rom is almost the same as Telcel's, but without the extra bloatware. I am definitely going to flash this one
2) I am from India. So I tried out flashing the India Rom (E988). Though the flashing was successful, there was no mobile operator network. Is this because of some baseband/modem mismatch issue ?
3) Would you happen to know which all roms are fully working on AT&T E980 devices that will work in India. I have tried out the Korean F240S and Telcel roms and both do work.
sandyiscool said:
Hi,
I am not sure if this question has been asked before as I could not find anything similar here. If it has already been asked, then I would request the moderators to please point me there.
I have an AT&T Optimus G Pro (E980). It was running the stock rom (AT&T E980AT V10g). I then flashed the value pack from AT&T (AT&T E980AT V10k) which I downloaded by following the download link provided in thread http://forum.xda-developers.com/showthread.php?t=2438088
The flashing tool I used is the one that required the .tot file and the .dll file. Flashing was a success.
I found the value pack 10k to be laggy compared to the stock 10g. So, I wanted to try out a new rom and flashed a Korean one (SKT/SK TELECOM(KOREA) F240S V10w). I did that using the flash tool and the kdz file given in the same thread as stated above. Flashing was a success.
Now, I want to return again to the AT&T stock (AT&T E980AT V10g). But, when I am using the .tot file and the .dll file, the flashing tool is showing an error something about the device model being different and that I should check the .tot and .dll file. I cannot paste the exact error message right now as I am not at my desk but I can paste it later, if required.
Do I need to have a kdz file of the stock to carry out the flashing ? If yes, then where to find it as the stock firmware thread in this forum lists only the zipped up .tot for the AT&T stock rom.
Else, do I need a .dll for the F240S model and then use it along with the stock E980AT firmware to flash ? If yes, then where can I find the .dll file ?
Thanks for taking the time to read this post and thanks for helping out This can serve as a reference to someone who is looking for the same answer.
Regards.
Click to expand...
Click to collapse
sandyiscool said:
Hi,
Thanks for showing the way. I am currently on the Telcel rom and everything is working perfect, though I dislike the bloatware in this rom, be it as less as it is
I wonder if you can help with the following questions :
1) What is the difference between the Panama and Telcel (Mexico) Roms ? I assume both are based on E980H but Telcel should have more bloatware, as it is from a carrier. How much bloated is the Panama Rom ?
EDIT : Got the exact answer for the above question in thread http://forum.xda-developers.com/showthread.php?p=45722192&postcount=1
Panama rom is almost the same as Telcel's, but without the extra bloatware. I am definitely going to flash this one
2) I am from India. So I tried out flashing the India Rom (E988). Though the flashing was successful, there was no mobile operator network. Is this because of some baseband/modem mismatch issue ?
3) Would you happen to know which all roms are fully working on AT&T E980 devices that will work in India. I have tried out the Korean F240S and Telcel roms and both do work.
Click to expand...
Click to collapse
Well as for Living in India Flashing a local rom does not always mean it will be better. As the device you have is meant to be in America meaning the India rom is pretty much gonna have its issue. I only recomend the Telcel or panama roms for the E980
I am new to this site but have used it in the past. I have rooted phones previously, Galaxy s & Note 2, and had no problems.
My current p[hone is an LG g4 h815T on MM6.0 provided by Optus in Australia. I am looking to root this device in the near future but have found it difficult to find a site that has versions of carrier roms. My experience with Samsung and the availability of stock carriers ROMs from Sammobile has possibly spoiled me.
I am looking to find a site to download the above firmware so that when I root my device I can, if necessary, return to the carrier provided version. I have seen a version on this site which I have downloaded, AU h815T 10H.kdz, which I believe is Lollipop 5.1. Can someone confirm this for me.
As for rooting the phone I am unsure if it is available for my device and would appreciate some advice as to whether it can be done yet or will I have to wait. Waiting is OK. Details of the software are as follows :
Android version : 6.0
Android Security Patch Level : 2016.01.01
Baseband version : MPSS.BO.2.5.c3-00101-M8992FAAAANAZM-1.31581.1
Kernel version : 3.10.84
Build number : MRA58K
Software Version : V20d-505-02
Thanks in advance to all who provide this advice.
Firmware
drdqld said:
I am new to this site but have used it in the past. I have rooted phones previously, Galaxy s & Note 2, and had no problems.
My current p[hone is an LG g4 h815T on MM6.0 provided by Optus in Australia. I am looking to root this device in the near future but have found it difficult to find a site that has versions of carrier roms. My experience with Samsung and the availability of stock carriers ROMs from Sammobile has possibly spoiled me.
I am looking to find a site to download the above firmware so that when I root my device I can, if necessary, return to the carrier provided version. I have seen a version on this site which I have downloaded, AU h815T 10H.kdz, which I believe is Lollipop 5.1. Can someone confirm this for me.
As for rooting the phone I am unsure if it is available for my device and would appreciate some advice as to whether it can be done yet or will I have to wait. Waiting is OK. Details of the software are as follows :
Android version : 6.0
Android Security Patch Level : 2016.01.01
Baseband version : MPSS.BO.2.5.c3-00101-M8992FAAAANAZM-1.31581.1
Kernel version : 3.10.84
Build number : MRA58K
Software Version : V20d-505-02
Thanks in advance to all who provide this advice.
Click to expand...
Click to collapse
Hey do you have a copy of current optus .kdz file? id like to change Telstra H815K to Optus H815T MM 6.0
here is link for older firmwares for you
httx://devtester.ro/projects/lg-firmwares/country.php?country=Australia
arium84 said:
Hey do you have a copy of current optus .kdz file? id like to change Telstra H815K to Optus H815T MM 6.0
here is link for older firmwares for you
httx://devtester.ro/projects/lg-firmwares/country.php?country=Australia
Click to expand...
Click to collapse
I found a kdz at the following link on XDA. It is about reverting to stock firmware and how to do it.
http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Good luck
Can i flash the .200 firmware from this website onto my "generic LAM" international?
I have an "international" model that i believe is the LAM (Latin American Model) and i want to downgrade from .224 to .200 (for ivoryroott to backup DRM before bootloader unlocking) The only place i can find any .200 software is from the linked site below. I want to make sure its safe for me to follow this website and flash this firmware so has anyone used this website before? What gets me concerned is that at the end of the firmware file that you download to downgrade your phone, it has "_NCB" this makes me worry its for a particular model... I have plenty of experience with android and development but this is my first sony phone. Also, ive already checked XperiFirm and it doesnt have any software for any of our models BEFORE the .224 or .254 firmwares which i thought was weird.
http://xperiafirmware.com/8-firmware/128-sony-xperia-z5-premium-e6853
Thank you guys for any help!
SOLVED: yes i can lol
Oh forgot to add that it is the 6853 model
Hi all,
I have an H815 USA version, which I got off eBay but expect to be from the USA G4 trial program, and I have a few related questions:
What is the most recent .kdz file that anyone has tested with this phone?
Is the most recent (6.0 if applicable) supported stock ROM the best, or does it have any significant known bugs, for example failing to send/receive SMS messages?
Does putting on another stock ROM permit any sort of unlocks that were not previously possible with the USA version firmware?
The phone came with v10b-EUR firmware, and would not update itself to anything more recent. However, I downloaded a Polish .kdz from here (H81510E_00.kdz): http://storagecow.eu/index.php?dir=Xda/LG+G4/H815/ and successfully installed it using the LG Uploader (2014 version) tool today.
This appears to have fixed all but one stagefright vulnerability. I am interesting in upgrading to one of the Marshmallow versions there, if it is advisable by the crowd here.
Based on a screenshot from this post (http://forum.xda-developers.com/g4/help/diy-h815-usa-variant-hardware-boot-loop-t3311623), it looks like user rogconnect may have a 6.0 ROM installed on this version of the phone, but I am worried about bricking my device or upgrading to a firmware that is buggy and not being able to revert.
I unlock My Note 10+ 5g(At&t) SM-N976U from At&t..But it won't give me software update.. It stuck on anroaid 10 one ui 2..and i live in Bangladesh so i can't use At&t for software update..so how can i update my phone to one ui 3 any solution?? Thanks
You won't get automatic updates outside US.
You can download the firmware and flash it yourself using Odin software tool.
There is plenty of threads in this forum that explain the process.
Latest firmware for your model can be found through this thread.
Flashing is well explained here, although it is for another model so don't flash the firmware referenced there.
All at your own risk. Inform yourself well before starting to flash!
OnnoJ said:
You won't get automatic updates outside US.
You can download the firmware and flash it yourself using Odin software tool.
There is plenty of threads in this forum that explain the process.
Latest firmware for your model can be found through this thread.
Flashing is well explained here, although it is for another model so don't flash the firmware referenced there.
All at your own risk. Inform yourself well before starting to flash!
Click to expand...
Click to collapse
Can't Find My phone's model frimware in frija, sammobile,etc etc.. I chaked lot of website but i can't find N976USQU1ASL3 firmware
The first link in my post allows you to find all FWs. You would want the latest U- FW.