hi , so the problem is that i flash a CWM that for ace to my gio (it's my fault , i didn't read it carefully) and then because of that i can't pass the samsung logo and can't go to recover. I just can go to Download Mode.
I try flashing the recovery and Firmware from odin but it stuck at setup connection.
I use Odin3 v3.09
Already try changing the usb port , changing the cable , uninstalled the Kies
can anyone help me? i don't want to go to the service center , because i hate it for a reason.
If i try charging my phone, the screen just keep flashing.
Thanks
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I fix it... I use Odin multi downloader v4.42 and it's work like a charm
Related
I was installing the ICS in kies the computer was shut down and now I get an issue fimware Please upgrade Encountered in recovery mode and the recovery kies asks me for a code put q pq cell not read the thanksssssss
If you can odin, flash stock and try again.
if u can boot to..
if u can boot to the samsung screen ..it white and says samsung then try to use the 3 button combo both volume keys and power while usb is connected to the computer.. open odin google-(odin samsung) find the odin file ofr ics or gb look in android dev i hope that help better then the other guy ^^^:good:
Hello guys
Need your Help plz
This is my first Post on XDA forum...I was trying to install CYANOGENMOD 10 From SD CARD using ROOMMANAGER .but something wrong has happened .I think that I made a big mistake.my original rom is I5510JPKD3,Now all I can see , is SAMSUNG logo
Im trying now to enter recovery mode and downloading mode using A+Power And T+ Power buttons ( i have azerty keyboard) to make flash with ODIN Soft, but it still doesn’t work
Thanks in advance
Try flashing the default firmware for it.
danger_beast said:
Try flashing the default firmware for it.
Click to expand...
Click to collapse
My Phone can only enter Emergency download mode.i tried to flash it with ODIN but it stuck at "setup connection"..
Well first make sure u hv correct drivers for that download kies usb driver u can get it over internet first start odin and load the file then connect the mobile while u're in download mode...... if nothing works try google like fastboot 'ur device name' or the last option customer care
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
can you still get to download mode?
if so just re-download the firmware and flash with odin
ermmanuel said:
can you still get to download mode?
if so just re-download the firmware and flash with odin
Click to expand...
Click to collapse
the message that said to conect via pc using kies it is downloada mode i tried going to odin again but odin cant detect
woahhh
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
ikhsaricky said:
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
Click to expand...
Click to collapse
can i have your pit file in your SM-T210?
As long as it can enter recovery mode and can be recognized, do a STOCK ROM FLASH (USE THE CLEAN METHOD OF FLASHING). Now attempt to do that flash again..
An image/screenshot of the problem might help us to help you.
aaronjasper49 said:
can i have your pit file in your SM-T210?
Click to expand...
Click to collapse
Aw, im using smt311, but flashing with odinnis the simole way,, did yiu finish it?
same thing happened to my t217s when Samsung didn't do anything for a legit issue with my tablet during an OTA update and stated that it was rooted (it has been stock since out of the box). after many attempts (didn't have another computer available) i switched to a different usb port and got it flashed just fine.
hi can i ask something it happened i flash samsung j1 then suddenly in 90percent was cut and i cant go back to download mode. and the phone turn black and cant connect to pc. Can Please can you help me?
I had a similar situation with a Galaxy SM-T113 here in Canada. I was hammering away at it for about 4 days with no luck. All i got was the "use Kies" to fix it message. Kies would not detect my phone though. Anyway what i did that worked was in part already tried earlier.. I already tried for example using a different cable and a different port. And i always got a failure with Odin and attempting the stock firmware flash.
So what did i do ?
I unplugged my Gamepad i keep plugged in 24/7 thinking maybe i had too many USB devices hogging USB port bandwidth.. maybe that was it I don't know.. I also uninstalled Kies but this time i said yes to installing the unified driver it asks you about. I also changed to yet another USB port.
It was working fine before hand.
I was trying to flash the firmware simply to reset the thing like i have done on countless other devices over the years.
I am not new to this sort of thing and was rather surprised to see Odin fail.
So who knows maybe my post here will help others.
I feel relieved i did not brick a perfectly good device. LOL
hi.i need some help maybe someone can help me out.. i got a m919 s4 and i was having problems with the wifi running 4.4.2. phone was rooted. so i try installing stock rom on phone to remove the root access and maybe that would fix the wifi issue.. so i try loading the same firmware using odin 3.09 but it gave me error on write..i disconnected phone and turn it on but the phone gave me a screen telling me to connect the phone to kies for emergency recovery. i try doing that but kies doesnt see the phone..and everytime i try write thru odin i get failed to write.. any ideas....
ps i can only get into download mode and the screen telling me to connect to kies for recovery nothing else
os 4.4.2
nevermind guy finally found the problem.. i needed to use a older odin for it to work thanx anyway
Hi guys, I need a little help from a good soul
I'm from Brazil, and my father have a Samsung Galaxy Grand Duos, I thought was that, so without a reseacrh in the internet, I've try to get SUPERUSER on his phone, and when I tryed to update from Odin, the cellphone is stuck on boot logo samsung.
Now every time I enter in ODIN mode, my computer dont recognize to upload the original firmware, and ether the Samsung KYES, to make a emergency recovery.
So somebody know how I can recovery the cellphone?
After a 2 days looking in the internet, I discovery something about the phone, isn't Samsung Grand Duos, the boot logo says Samsung Galaxy NEO
have the codename: GT-I9060 ... and I don't founded nothing here about this phone.
Anyway, somebody can help me to unbrick this phonel? Its very like a Grand Duos, but is Samsung Galaxy NEO with Dual SIM.
Please, help me to unbrick! the old man want to kill me! hehehehe thx!
cya!
hi! you say (Now every time I enter in ODIN mode, my computer dont recognize to upload the original firmware)
this seems computer problem i think. Check if the drivers is ok at device manger on your computer and try to install the correct drivers for adb conection.
grsaridhtc said:
hi! you say (Now every time I enter in ODIN mode, my computer dont recognize to upload the original firmware)
this seems computer problem i think. Check if the drivers is ok at device manger on your computer and try to install the correct drivers for adb conection.
Click to expand...
Click to collapse
Hi, i've did all u say...
But still stuck..
Only I can see is the brand model name: Samsung Galaxy Neo and on the LEFT TOP of the screen have an symbol. RED EXCLAMATION !
And do nothing,
Only thing I can do is, enter in odin mode (power + vol down + home) after (vol up) ...
Appear
Odin Mode
Produto Name: GT-I9060
Current BIN: Custom
System Status Custom
I've downloaded the Odin 3.09 too, this odin recognize and allow me to send new firmware, but I did and nothing happen, still stucked.
Now I'll try download de original firmware from Samsfirmware and try send through odin again croos my fingers
Do you know what more else I can try?
Thx!