Hi just want to ask if it is possible to convert a f180L variant into a f180K?
So i can use its 4g band.
Sorry for the noob question.
Impossible as hardware doesn't support the bands. You will get no signals error
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
Related
Hi guys,
This is my first post in XDA
I have F180L,
as reading others posting, some people posted that F180L is equal to E973.
is it true?
can I flash CM 10.1 in my F180L by using E973 rom?
and I live in korea, and using my phone LG U+ provider,
Can I use my phone's LTE feature after flashing CM 10.1?
one more thing is that I'm mobile developer, I just want to contribute to, my gift in this forum
Where can I start first? I have some knowledge that embedded systems, and android framework, but I have no exp making device driver,
hi
I have an Optimus G F180L20S bought from Ebay.I have changed to english language in the settings and i have upgraded to 4.1.2 via OTA.
But still It has all Korean APPS and Korean language. I need help in Deleting the Korean preinstalled APPS and all the Korean Stuff if possible. Also while dialing a number without the country code, it asks call Korea or call Local. Iam new to this smart phone/Andriod.
1.Please help me how to make everything in Englisg with out korean APPS.
2.How To Root the above model Phone.
3.How to Change BootLoader. /What is BootLoader/Whare are advantages?
4.Will the 3G and 4G LTE be functional after the Rooting/Change in Boot Loader.
5.How to bring the above phone to Recovery Mode so that i can run Bloatkill.zip.!!
6.Any Idea whats the GSM frequency and the 3G/4G Bands?!!
Thanks
Sunil
Why you people buy korean phones?it's stated very clear,E975 is the international version,F180 is the koren model. You could try to flash an e975 stock rom on it...but it may be possible to break lte connection.
Sent from LG E975 pwd by CarbonRom
LG F180L20S to E975
kimitza said:
Why you people buy korean phones?it's stated very clear,E975 is the international version,F180 is the koren model. You could try to flash an e975 stock rom on it...but it may be possible to break lte connection.
Sent from LG E975 pwd by CarbonRom
Click to expand...
Click to collapse
Thank you Kimitza,
Well I have flashed E975 10C rom. now the phone works ok. (so far not rooted the phone). But I feel the signal strength is little bit lesser.
Some times for few seconds there is no signal itself.
Also i have enabled (phone allowed) GSM/WCDMA/LTE in the mobile network. But iam getting only "E" edge in the network type always.
After the changing the stock rom. how to find the LTE bands. is there any method.
If as u say the LTE connection is brokedn how to restore the same back to normal
Regards
Sunil
There is a korean modem on chadouming's site.look in his cm thread and you will find the download place.
Sent from LG E975 pwd by CarbonRom
F180L20P
I have also the Korean model. I apologize for this after reading your comments about Korean model but let it forget. I have also the same problem Korean applications, call to local/call to Korea message e.t.c.How to remove this.Which ROM i should use to upgrade it from jelly bean 4.1.2 to 4.3? when i click the updates icon, it tells that updates are available.after downloading updates, when it tries to install it gives Err:0x13B. What is this and how can it be fixed?
One more thing i am using the GSM800/900/1700/1800 band.
I shall be thankful for your help.
mansoor3131 said:
I have also the Korean model. I apologize for this after reading your comments about Korean model but let it forget. I have also the same problem Korean applications, call to local/call to Korea message e.t.c.How to remove this.Which ROM i should use to upgrade it from jelly bean 4.1.2 to 4.3? when i click the updates icon, it tells that updates are available.after downloading updates, when it tries to install it gives Err:0x13B. What is this and how can it be fixed?
One more thing i am using the GSM800/900/1700/1800 band.
I shall be thankful for your help.
Click to expand...
Click to collapse
Hi! I just happen to update my LGOG F180K to E975 using KDZ updater. If you do this, you must also flash the baseband for it. But problem is, as for me, the message sending is a headache. You can try at your own risk.
Lgog f180l20s
MitoTakatori said:
Hi! I just happen to update my LGOG F180K to E975 using KDZ updater. If you do this, you must also flash the baseband for it. But problem is, as for me, the message sending is a headache. You can try at your own risk.
Click to expand...
Click to collapse
Well Thanks for the thread.
Everybody says update KDZ and also must then Flash Baseband. Noone gives the procedure to flash kdz then flash baseband.
My original model is F180L20S.
I have tried to root the phone but i couldnt do so yet.
I am back to F180L20S from e975 coz when in e975 there was no signal and everytime it shows network type unknown.
Luckily i manged to put back f180l20s u+ LTE put the language to english and managing. now its working. my mobile network setup shows 3g/4g data only not the conventional gsm/wcdma/lte etc.
will i get 4G network.
Thanks
Sunil
The question is in the title, I ask it because I've read that you can lose signal from your carrier if you do that incorrectly.
Use search..it has already been discussed many times...don't be lazy
Sent from LG E975 pwd by MoKee Rom
hello i have a question about the lte band on different version of LG OG mine i got f180L
If I change it to E975 it will change to different band? because f180 just support something like 800 Mhz band but my carrier support higher from that.
so my question is. if i change my firmware to e975 it will change my network band?
Another question i want to change my f180L 20t is it safe to downgrade to e975 10d?
thanks for any help for me.
as the title says
im confused between f180k and f180l
my phone is from a korean carrier named KT aka Olleh
now many people says that optimus g from KT aka Olleh is f180k, but when i tried to flash a f180k modem on my phone i dont have a signal but when i flash a f180l modem i have a signal, so now i think my phone is f180l.
now f180l's LTE frequency band is 2100mhz
while f180k's LTE frequency band is 1800 mhz [correct me if something wrong here thnx]
now my phone's modem is f180l and my network's LTE band is 2100mhz
but my phone cant detect a single signal from LTE while im on a LTE coverage area of my network
somebody enlighten me
tnx
take a look at this thread: http://forum.xda-developers.com/showthread.php?t=2334023
akahroba said:
take a look at this thread: http://forum.xda-developers.com/showthread.php?t=2334023
Click to expand...
Click to collapse
sorry but i got nothing on the thread
if you could explain why you point out that thread to me, please??
yesiamfrozen said:
sorry but i got nothing on the thread
if you could explain why you point out that thread to me, please??
Click to expand...
Click to collapse
Because, I think, that's all we know about the variants. You should consult your carrier and network provider about the issue.
O sign on the back is F180K, ULte sign on the back is F180L and 4GLTE sign on the back is F180S, why did you flash the baseband?
It's possible that your phone is using the IMEI from a F180L.
Duo8 said:
It's possible that your phone is using the IMEI from a F180L.
Click to expand...
Click to collapse
i think of it too. i know that olleh is f180k and my phone is from olleh so that means my phone is f180k, what makes me wonder is f180k baseband is not working on me, only f180l baseband works
yesiamfrozen said:
i think of it too. i know that olleh is f180k and my phone is from olleh so that means my phone is f180k, what makes me wonder is f180k baseband is not working on me, only f180l baseband works
Click to expand...
Click to collapse
If your phone is using a f180l IMEI then only f180l bsb will work.