Related
I have a problem, that I hope someone here can help me with.
I have 2 devices, a digital camera and a phone:
- Canon Powershot G10
- HTC Touch Diamond
The Diamond is capable enough that I don't always need to take a laptop with me when I am travelling. But I still need to transfer pictures from the camera to the internet. The phone can upload to the internet if only I could get the pictures onto the phone! So I want to find a way to transfer selected pictures from the camera to the phone *without* using a computer.
As I can see it, there are several different ways to go about this, but I haven't found a solution yet:
1) Find a device similar to the iPod Camera Connector that would let me connect the camera to the phone via USB. Note that it is not enough to have a device that copies all photos. I need to select which photos will be copied. Copying 16GB of pictures onto the 4GB phone is not an option.
2) Find an SD card reader that can connect to the HTC Touch diamond directly.
3) Find a bluetooth adapter for the camera that will allow file transfers.
4) Find some way (hardware and/or software) to make the phone work like a PictBridge-compatible printer, so that I can "print" selected photos from the camera to the phone.
5) Find some software and/or hardware that will make the phone work as a USB host. If that was possible, reading SD cards is trivial.
I have searched and searched for solutions to this problem but so far without a result.
Needless to say, the solution needs to be both cheaper than a laptop and especially smaller and lighter than a laptop. Otherwise I could just bring a laptop.
I hope someone here can help me realize the full potential of my HTC Touch Diamond!
Best regards,
Mikkel
without usbHost nothing can make the usb connector in the diamond be
and activeparty
it can interduce itself to the camera as usbMasstorage but can connect itself to anything
so your camera would have to be the activepart no matter if you PictBridge, sdcardreader or iPod Camera Connector
the extUSB on your device is miniUSB input only when usbHost is not supported
plus audio out
Thank you for your reply.
As far as I know, neither the camera nor the Diamond has the capability to act as a USB host. Connecting them directly is therefore probably not an option. That is why I listed the various things that I have thought could go inbetween.
The iPod camera connector is such a device: a device that can connect 2 USB clients to each other. Unfortunately it only works on an iPod (as far as I know). I believe it may be using the USB OTG standard.
I know that a standard USB SD card reader requires a USB host to connect to. That is why I was hoping to find a non-standard SD card reader specialized for use with Windows Mobile phones or HTC phones. There is no doubt that it is possible to make such a device - I just don't know if anyone has done it. It would be useful for many purposes.
Here are some devices that come close to what I want to achieve, but not quite:
http://www.usbgo.com/
http://www.cooldrives.com/usb-otg-adapter.html
The main problem with these is that I don't see any option to select only a few photos to transfer.
So I was hoping that one of the knowledgeable people in here knew of a solution.
doubt any cable it do it as the cable it would have to init the usb connections to both devices and handle which files where to be transfered from to where
that would prob require the cable to have a screen and input option which would
pretty much make it a compuer or a pda with usbHost
my bet is that ipod have usbHost otherwise it would never work
unfortunaly the many posts in the forum about usbHost include as many hits about
usbToGo
and as much or little success
Connect a Usb host device with the camera
Hi.
Do you know how I can connect a digital camera with a device that has usb host. I own a X7501 with WM6.1. I was looking for a solution to transfer my digital photos taken in my 7 MP Sony Digital Camera to my HTC, in order to send it by mail.
Thanks for any suggestion
Regards
yes Athena is one of the few htc devices which support usbHost
http://forum.xda-developers.com/showthread.php?t=334024
it should work just fine if the camera support usbmass stroage
otherwise it require a driver for the camera
also you may have to use a cable which get power from somewhere else
then the Athena as it may not able to provide enough power
Searching for a solution!!!
Rudegar said:
yes Athena is one of the few htc devices which support usbHost
http://forum.xda-developers.com/showthread.php?t=334024
it should work just fine if the camera support usbmass stroage
otherwise it require a driver for the camera
also you may have to use a cable which get power from somewhere else
then the Athena as it may not able to provide enough power
Click to expand...
Click to collapse
Hello.
I try to connect my camera to the Athena, using the 4 in 1 cable adapter, It ask me for a driver name. I couldn't get anything.
Also I try to connect it via the docking station that has two usb ports for the USB HOST, in these I can connect a mouse and a keyboard. Also it has an external power, but the camera did nothing at all. I try to use all the connection mode that the camara has.
Also I try that some other recomend in this thread: USB Driver for Digital Camara.
I made a lot of search. Did you know somebody that can help me.
Regards.
you sugest you ask in the Athena forum
or pm some of the people who wrote in the
thread i linked to
as I don't have any first hand exp with Athena's or using usbHost
You can actually buy SD to Micro sd adaptors. I have one, they work really well.
Greenturtle said:
You can actually buy SD to Micro sd adaptors. I have one, they work really well.
Click to expand...
Click to collapse
Thanks a lot for your tip.
I'm trying a USB card Reader, but I'm looking for a solution that let me use the 4 in 1 cable, in order to carry the less of thinks with the me.
Right now I'm using a little bag with all that I use.
Regards.
its really interesting and great fun to play games in this forum.best wishes!!
thanx
catus
RPG
simple answer
Get a micro sd card that has an SD adapter. Plug the micro sd card into the sd adapter and plug the sd adapter into the camera. Take your pictures. When you are ready to email pictures, pull the adapter out of the camera, remove the micro sd card, and plug it into your phone. You are ready to email pictures. Keep things simple and just carry the micro sd adapter and forget all the cables and stuff. A spare card is always handy, too.
how to make defy look like a usbstick to any device.
i want some kind of emulator so my defy looks like a 2gb usb stick!!
Just connect to a pc with the data cable and select memory card access when asked for the type of usb conenction, it should get detected and act like a normal pen drive.
What device are u trying to use it with?
pravarth said:
Just connect to a pc with the data cable and select memory card access when asked for the type of usb conenction, it should get detected and act like a normal pen drive.
What device are u trying to use it with?
Click to expand...
Click to collapse
well that dont work im not that stupid. but im using the IKey M3 thats a recording devise that needs a usb pendrive.
http://www.ikey-audio.com/m3
thats it
i dont know i may'b super noob ,but have connected my defy witha samsung 2011 lcd tv & afair,i could access all of the defy just like a usb stick!
Does that device recognize other pen drives with no problem?
kbxdauser2011 said:
i dont know i may'b super noob ,but have connected my defy witha samsung 2011 lcd tv & afair,i could access all of the defy just like a usb stick!
Click to expand...
Click to collapse
I have a Samsung 42" plasma with USB port and it read my HDD and all my thumb-drives to play movies/Pics/musics. Never thought of trying with my Defy. Will certainly try this out today.
If the device supports mass storage host protocol then I dont see as to why it wont. My LCD recognises the defy without a problem.
Sent from my MB526 using Tapatalk
well yes normal usb sicks do work. hmmm i will test it some more.
If this is possible it would be very useful. I could put a bookable ubuntu on my phone and boot pc's from that instead of carrying a pendrive everywhere.
ow and im on Cm7
just enable usb mass storage in notification area
crixxalis said:
just enable usb mass storage in notification area
Click to expand...
Click to collapse
I DID and it did not work
hmm.... maybe just a little disclaimer in case it needs to be said: when enabling USB mass storage, the only storage system that can be seen from the defy is the one on the micro SD card.
So, if you don't have one, i'm pretty sure nothing would happen even if you connect it properly
haxabbit said:
hmm.... maybe just a little disclaimer in case it needs to be said: when enabling USB mass storage, the only storage system that can be seen from the defy is the one on the micro SD card.
So, if you don't have one, i'm pretty sure nothing would happen even if you connect it properly
Click to expand...
Click to collapse
I got a sdcard. it works on my pc normaly
In that case, i think it's time to think about using another feature that came with the phone: warranty
Monkey007Man said:
I DID and it did not work
Click to expand...
Click to collapse
There might be some issue in the device u are trying to connect to. Even in my pc i have usb issues. Some specific pen drives just randomly wont work on my pc. Just my 2 cents.
I've got an GT-P7500, and it will not read any USB Sticks.
Using the Samsung connection kit.
tried with 15 different USB sticks, all FAT32 formatted, all sizes 1-16gb.
A friend uses a 4gb stick in a GT-P7510, i tested that one, didn't work
Other things like usb mouse works, but not usb stick.
Anyone got any suggestions ?
Wonder if there is something wrong with it.
How do you know it isn't working? What directory are you looking at? What does the notification bar show? Which connector are you using? Is USB debugging on?
Also this is more a Q/A...
I'm hoping this thread is still alive because I am having the same problem. @ajnindlo I'm using the standard Samsung USB Connector with a 8gb usb stick. I've tried with USB Debugging on & off and I get the same message. "Damaged USB" and asked me to reformat.
I am using a Mac BUT I did format the stick as a ms-dos fat format.
Please help...
Thank you
PS. I know this is more of a q&a place, didn't know where else to post and didn't find any other with this problem but here. Please redirect to correct location if you know of a solution. Thank you
Just i hace received my USB kit and it works perfectly, my USB has 16 g and i haven't do anything to work, conected and work.
Sent from my GT-P7510 using xda premium
I had a 32 GB sd card and it also wouldn't be detected by my Galaxy Tab. But, I plugged it into my phone, plugged my phone into the computer, formatted the sd card and when I put in my Gtab, it worked.
I got my connection kit today but its not working at all.
Got 2 adaptors 1 for sd card and 1 for usb connection they both dont work.
Got no status bar message or anything.
Do I miss something here?
Sent from my GT-P7500 using xda premium
one catch that I have realized is that for proper identification of the USB Stick, the tablet must be in english language.
My friend had a hard time figuring out why his tablet won't show up any notification when a USB Stick was connected, whereas mine shows the "My Files" app showing the storage folder and all the contents of the stick, joking around I told him that was because my tablet was in english and his tablet was not.
Anyway, Astro file explorer doesn't work with USB Sticks, Use ES File Explorer instead and look in /mnt/ folder for usbdrive , there should be your content.
Nope still not working. No files found.
Feels like my device doesnt support usb host.
Is that possible?
Sent from my GT-P7500 using xda premium
brieuwers said:
Nope still not working. No files found.
Feels like my device doesnt support usb host.
Is that possible?
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
Connect the usb stick, open ES File explorer and go to /mnt/usbdrive folder, if you can't find the folder (which is not on the sdcard) you need to configure ES File explorer to get out of the sdcard directory, the usbdrive folder is always present even if you don't have any usb drive connected
I had similiar problems with my 16GB P7510. It would only recognize any of my Sandisk sticks and a brand new PNY only at 30% of the time. The only stick it was reliable with was an ancient 256MB stick I had. I worked fine with my camera.
I ended up returning it for a 32GB P7510 and have not had any problems with any of the sticks. At the time I didn't think the tablet was defective but it appears it was.
Sent from my GT-P7510 using Tapatalk
Solution ???
drummerweed said:
I'm hoping this thread is still alive because I am having the same problem. @ajnindlo I'm using the standard Samsung USB Connector with a 8gb usb stick. I've tried with USB Debugging on & off and I get the same message. "Damaged USB" and asked me to reformat.
I am using a Mac BUT I did format the stick as a ms-dos fat format.
Please help...
Thank you
PS. I know this is more of a q&a place, didn't know where else to post and didn't find any other with this problem but here. Please redirect to correct location if you know of a solution. Thank you
Click to expand...
Click to collapse
I have exact the same issue, but it's strange, some SD has this issue, some don't.
"Damaged USB"
I found a trick, but it solved my problem only once: format SD card by a digital camera (Canon powershot) , SD was now recognized by Tab10.1
Putting some extra files on it by PC ... insert SD to Tab10.1 ... same issue again :crying:
Have tried several SD formats & sizes ... notting helps
Did someone knows a solution to solve this problem
GT-P7510
Android 3.2
Rooted, TASK 14 Rom
Try to reboot, it worked for me.
bar_rodoy said:
Try to reboot, it worked for me.
Click to expand...
Click to collapse
Correct ... but after a second or third time connecting same SD , issue returns
Have tried this, waiting for a while does helps time to time ... so I guess it's maybe "memory" or "kernel" (system) related.
It seems we have the same TASK14 ROM + Pershoot's kernel.
Strange things.
I made the test by unroot my device and went back to factory stock ... it look like the issue is solved for 90% ... it appears when you disconnect and reconnect to fast after the 1st disconnection .
usb not recognised
Nothing happens when i plug (several) usb sticks. /mnt/usbdrive is empty.
Any idea?
charging Problem
You must Check that Your usb Debugging is On or Not as it creates problems and this will be stopping You device from Accepting Usb Sticks..
I found that FAT 'sdCard's would mount , but that NONE of my NTFS sticks would mount
All my sticks are NTFS , so that was unacceptable.
rooted 7500 and 6800
Installed 'Paragon NTFS&FHS', from the AndroidMarket and all files now popup in 'MyFiles' when I insert the usb with the adaptor
I have the Samsung Connection Kit containing as USB and a SD adapter. The USB adapter works fine, but the SD adapter doesn't work at all. All it does is starting the TuneIn Radio app when it is connected. I uninstalled the app and now connecting the adapter has no effect at all. Any suggestions?
Hi,
In january/february, i bought a USB keyboard with an USB adaptater to use it with my tablet.
I tried to plug it in the 3G's usb port, it did'nt worked, and because last week I broken it, and I updated my tab to ICS, I tried to plug my keyboard in the 3G port, and it worked !
Maybe it's because of ICS ?
Also, my keyboard has also an usb hub, it works too !
Mine seemed to work from the the start with Rom version: 3.2.69 and that's on 2 different G9 101, however others result have varied and it seems a bit hit and miss to say exactly what's going on.
I know there are 2 different versions of the 10" G9 - A101S and A101H , I've not dug too deep into it and I'm not 100% and what the differences are.
I think ICS generally improved the Usb Host support/integration which is always welcome.
Now I just need a large bag to transfer all these extra devices for my "portable tablet".
Mine won't see USB drives/camera cards formatted to FAT32. No big deal.
Actually, it did connect with my phone and its 16GB microSD card, so I'm happily mistaken.
From the ICS "firmware" update change log:
Archos 80/101 G9
Firmware changes
Version 4.0.4 - March 8th, 2012
Initial Ice Cream Sandwich 4.0.3 firmware release
MediaCenter Video: support for MKV3D on TV with automatic switch to best 3D mode
MediaCenter Video: allow to disable system notifications in video player
MediaCenter Video: collection of VOB files from DVD are now gathered into a single movie item
MediaCenter Music: integrate Music control panel in Lock Screen
MediaCenter info dialog: allow to edit the name used for performing the Movie and TVShow online search
File Manager: display a notification when file copy continues in background
File Manager: improved drag and drop support
File Manager: new option to prevent indexing of some storage/sdcard folders by multimedia library
Applications: more robust video conferencing support (Google talk, Skype etc.)
USB file transfer: a samba server is now activated on the tablet when using USB network tethering for easier file transfer on non Windows based hosts [Samba for "non Windows"??? Something bass-ackwards about that ...]
Archos widgets: new USB network tether widget [Anyone know if this means it will tether off a phone this way ala older Archos models like the 5 or 43 , or is this meant to "share" its internet connection (however it would obtain it, even if not "3G-enabled" - which seems useless)]
External Keyboard: french layout has been expanded to handle AtlGr keys for special symbols
Accessories: Xbox gamepad support
Maybe I shoulda hung on to the new 80 I bought a week ago, and returned after trying it out for a few days. The inability to get the back/3G USB port and MTP tools to work was a big factor in my return decision (along with no network tether option as the 5 and 43 had, and the reality check on the initial Staples web page claiming 1GB RAM - hope springs eternal...)
FWIW,
R
@rokkywoof I think that it's for the micro usb port, because this oen is meant to be an OTG micro usb port, and the original usb port is just for the 3G, but maybe they failed and applied the stuff to the 3G's port?
@Telyx/trevd wow that's strange !
I saw that the A80S (A101S) are the archos with flash memory (8 or 16gb), and the A80H/A101H are the archos with the Hard drive (H for Hard drive )
Telyx said:
Mine won't see USB drives/camera cards formatted to FAT32. No big deal.
Actually, it did connect with my phone and its 16GB microSD card, so I'm happily mistaken.
Click to expand...
Click to collapse
Is this true? This is the main reason why I was planning on getting this tablet this week because it is (or so I thought) that would have been able to transfer raw files from my CF cards to the internal hd, and backed up on an external HD. I shoot about 300gig a week while on the road.
Sent from my PG86100 using Tapatalk 2
It works fine... just have to turn on the "3G Stick" port, then wait a moment before plugging the camera, phone, thumb drive, card reader, etc. in. One camera connects like a thumb drive (mount the "drive" manually and open the folder in the file explorer), the other launches the Gallery app to allow me to import pictures.
Telyx said:
It works fine... just have to turn on the "3G Stick" port, then wait a moment before plugging the camera, phone, thumb drive, card reader, etc. in. One camera connects like a thumb drive (mount the "drive" manually and open the folder in the file explorer), the other launches the Gallery app to allow me to import pictures.
Click to expand...
Click to collapse
Thank you thats what I needed to do turn on 3G in settings and now it all works
3G's USB seems to work with nearly Everything
Hi @ll,
I also tried to get USB devices to work, no problem with USB-Sticks, but USB-HDD's (selfpowered) seem not to Work (neither on Stock image nor on Cyanogenmod). The HDD starts turning but Android doesn't mount it. Can someone give me some pointers?
My Specs:
Archos G9 80 Turbo HDD with an USB-HDD (USB 3.0 (should be backwards compatible)) by Toshiba
Thanks
I would bet the tablet is not able to supply enough power to actually start the USB HD up.
Remember that usb port was designed to be used with Archos' 3G cell stick and really wasn't meant to be hooked up to other things.
If the port is enabled, there is allways power for the hdd, also for a stick a mouse. But some keybords may not work (I don't figure it out).
The app USB OTG Helper will help to mount the hdd/stick.
I used a friends powered usb hub (dlink dub-h7) and was able to use both my keyboard and mouse with my tablet unfortunately my usb thumb drives dont work when attached to the usb hub however they do work when attached to the hub I didnt have my powered usb hard drive with me to test
Powered Hub
usb2lan-adapter?
Hi,
Just bought a G9 101 turbo to play with.
stock 4.0.25 ROOTED flashed and it's hanging nice on my tv.
Can anyone tell me/give me advise if there's any usb-lan adapter that works?
Would love to use a cable instead of the wifi...
THANKS!
--- EDIT ---
- Found something:
http://android.stackexchange.com/qu...between-an-archos-g9-android-4-0-wifi-and-a-l
- probaly will get me a thing like this:
http://star01.en.made-in-china.com/product/UqjmkZcOATri/China-USB-1-1-LAN-Card-Adapter.html
Sent from my Galaxy Nexus using Tapatalk 2
no but there is promise of usb otg I believe some people have been able to get it to work
I was bummed about the inability to add memory, but I've discovered some pretty cool workarounds.
For one, USB mass storage is working on several of the ICS ROMS I've tried, such as Hellfire KS and my new favorite SGT7. By using a powered USB hub and an app called "Stick Mount", I've been able to mount a 32GB flash drive. Because it requires a powered hub, it's not portable, but it's still cool to have that option.
What I like even better are some software solutions I've found which let me access my media over my wifi network, eliminating the need for physical storage:
BS Player - It's a general media player which runs many audio and video formats. Put it in LAN mode and you can browse shared folders on your PC. One really cool feature is that if you play an audio file over LAN, it can automatically add all of the other files in that folder to the playlist.
X-Plore - a really well-made dual pane file browser which can access folders via LAN and FTP. This is nice for backing up large files and such. The dual pane feature makes it super easy to transfer files from one location to the other.
Anyway, I hope that's helpful.
esteband said:
X-Plore - a really well-made dual pane file browser which can access folders via LAN and FTP. This is nice for backing up large files and such. The dual pane feature makes it super easy to transfer files from one location to the other.
Click to expand...
Click to collapse
X-plore is awesome, thanks for the tip.
You can add power for OTG with a USB phone charger
http://www.amazon.com/gp/product/B003M9Z5F6
and 2 AAs on a usb y cable and the whole arrangement will fit in your pocket, depending on how tight your pants are.
follolw up question
Lotek said:
X-plore is awesome, thanks for the tip.
You can add power for OTG with a USB phone charger
<Amazon link removed>
and 2 AAs on a usb y cable and the whole arrangement will fit in your pocket, depending on how tight your pants are.
Click to expand...
Click to collapse
Is a powered hub needed for any USB device? I've got an OTG cable and a thumb drive is seen by the KF (using StickMount) and I can see the files on it but the drive becomes inaccessible as soon as I try to access any files on it. It seems as if there is just enough power to fire the drive up but not enough to use it.
I like your idea of a battery pack and a Y cable. How do you have the Y cable arranged (i.e. which end of this configuration gets the base of the Y and which ends get the branches)? If you have a link to the Y cable you used that would be a tremendous help as well. I'm searching right now and there are quite a few out there.
boomshnka said:
Is a powered hub needed for any USB device? I've got an OTG cable and a thumb drive is seen by the KF (using StickMount) and I can see the files on it but the drive becomes inaccessible as soon as I try to access any files on it. It seems as if there is just enough power to fire the drive up but not enough to use it.
I like your idea of a battery pack and a Y cable. How do you have the Y cable arranged (i.e. which end of this configuration gets the base of the Y and which ends get the branches)? If you have a link to the Y cable you used that would be a tremendous help as well. I'm searching right now and there are quite a few out there.
Click to expand...
Click to collapse
I followed this guy's setup, probably a member here:
http://www.youtube.com/watch?v=BFEMh0ZYT5M&feature=youtu.be
Amazon links in the description.
It's pretty self explanatory when you see the y cable, there's a male end which goes to the mini USB otg adapter and the 2 forks of the Y cable end in male and female connectors, battery charger on the male and your portable hub or flash drive or whatever plugs into the female.
Power is not needed for absolutely every USB device, many keyboards work fine without it, but the majority of flash drives and all of them over 8 GB (reportedly) require it.
Thanks Lotek. That's perfect. Can't wait to get this all setup now.