Related
Is there something additional I need to do to actually gain "root"? I can't install the clear lock screen from smurf, can't wireless tether.... Don't know what's going on, all of this used to work fine on my Hero - what am I missing?
I don't think you have given enough info for people to even know what the problem is that you are having. Maybe you could be a bit more specific. Do you have superuser installed?
Sorry about that.... basically im on stock 2.2 with supposed "root" using regaws method - problem is, I can't use anything though; adb, wireless tether, I can't flash a lock screen (just sits at boot screen).
Download superuser app from the market place or google it if it is not on your phone already. Install it then launch an app that requires root. You will know real fast if you are rooted.
DomSim said:
Download superuser app from the market place or google it if it is not on your phone already. Install it then launch an app that requires root. You will know real fast if you are rooted.
Click to expand...
Click to collapse
I do have SU... that's the thing but when I try ADB Remount it says device not permitted or something like that, can't remember exactly
You could try full wipe / reflash.
Maybe try a diff ROM too.
You need to flash the engineering bootloader (0.76.2000). Go to Toast's method part 2 and follow the steps to unlock nand. You need the engineering bootloader in order to access /system.
Sent from my PC36100 using XDA App
sombdy said:
You need to flash the engineering bootloader (0.76.2000). Go to Toast's method part 2 and follow the steps to unlock nand. You need the engineering bootloader in order to access /system.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Nand root... I was looking for more info on this, I thought it was the culprit, thanks - ill post results, hopefully good
Edit: Won't work "Permission denied" .... this is really starting to piss me off grrr
DirtyShroomz said:
Nand root... I was looking for more info on this, I thought it was the culprit, thanks - ill post results, hopefully good
Edit: Won't work "Permission denied" .... this is really starting to piss me off grrr
Click to expand...
Click to collapse
Have you run Unrevoked Forever? This will turn off security permissions and should then allow you to flash anything.
Sent from my PC36100 using XDA App
Ok, the reason
Code:
adb remount
doesn't work is because the boot.img isn't patched to allow that, because I forgot to at the time of posting. You still have root (as long as you actually completed the guide successfully), that's just an all time access root through adb
To acheive the same results, type
Code:
adb shell
type
Code:
su
you will then see #. thats root.
Then remount your /system partition using
Code:
mount -o rw,remount / /system
there you go.
regaw_leinad said:
Ok, the reason
Code:
adb remount
doesn't work is because the boot.img isn't patched to allow that, because I forgot to at the time of posting. You still have root (as long as you actually completed the guide successfully), that's just an all time access root through adb
To acheive the same results, type
Code:
adb shell
type
Code:
su
you will then see #. thats root.
Then remount your /system partition using
Code:
mount -o rw,remount / /system
there you go.
Click to expand...
Click to collapse
When I try to type "su" it says "Permission denied"
DirtyShroomz said:
When I try to type "su" it says "Permission denied"
Click to expand...
Click to collapse
Do you have usb debugging on?
Try the new 1 click root in the dev forum. Unrevoked 3.2. See if that doesn't do the trick.
Sent from my PC36100 using XDA App
My guess is you didn't flash the 2.2-root.zip at the end then.. That's the best I can do w/ the info you've given.
one was already asked once but i had two questions
1. Is USB Debugging turned on or off? Settings > Applications > Development
2. you are using a stock rooted rom. are you trying to use sprint's wireless tether app? Sprint's app wont work you need to download wireless tether from the market.
joebags said:
one was already asked once but i had two questions
1. Is USB Debugging turned on or off? Settings > Applications > Development
2. you are using a stock rooted rom. are you trying to use sprint's wireless tether app? Sprint's app wont work you need to download wireless tether from the market.
Click to expand...
Click to collapse
Running stock 2.2. Regaw I did flash 2.2-root at the end and I am trying to use wireless tether not Sprints hotspot
I do have superuser in my apps list and I was able to install SNeoid, Swype, Setcpu, juicedefender and a few others that may require root but it wont let me do anything via adb or install any themes/mods that come in .zips
DirtyShroomz said:
Running stock 2.2. Regaw I did flash 2.2-root at the end and I am trying to use wireless tether not Sprints hotspot
I do have superuser in my apps list and I was able to install SNeoid, Swype, Setcpu, juicedefender and a few others that may require root but it wont let me do anything via adb or install any themes/mods that come in .zips
Click to expand...
Click to collapse
ok do this in command prompt and paste the results in code tags (to save space)
Code:
adb shell ls /system/bin/
regaw_leinad said:
ok do this in command prompt and paste the results in code tags (to save space)
Code:
adb shell ls /system/bin/
Click to expand...
Click to collapse
Code:
setconsole
dumplayer
svc
e2fsck_recvy
chownto
apph
ps
id
chownThp
notify
dhcpcd
pand
renice
bugreport
snd8k
hciattach
iqfd
top
lsmod
setprop
ionice
ifconfig
iptables
kthp_proxy
logwrapper
getevent
htcipcd
su
start
iqd
wipe
ip
smd
sleep
getWiMAXPropDaemond
newfs_msdos
vdc
sync
udhcpd
pppd
rmmod
fsck_msdos
netstat
route
sound8k
rm
radiooptions
pm
logcat
setWiMAXPropDaemond
resize2fs_recvy
htc_inittest
vmstat
dvz
mmcamera_test
keystore
dmesg
system_server
linker
fbtool
reboot
sdptool
busybox
hd
iftop
insmod
bootcomplete
rild
schedtop
debuggerd
wpa_supplicant
schedtest
bluetoothd
ping
btld
ime
omx_tests
tc
sendevent
racoon
toolbox
date
bma150_usr
bootanimation
wimaxDhcpRenew
log
installd
wimax_uart
applypatch
wimaxAddRoute
dexopt
monkey
ln
getprop
album_hdmiexe
stop
surfaceflinger
uevent
akmd
monitorMTD
wimax_mtd
mv
debug_tool
servicemanager
wimaxDumpKmsg
dumpstate
ipd
DmWrapperTest
nandread
kill
gzip
chmod
rmdir
lsc_camera
dbus-daemon
run-as
netcfg
cat
htclogkernel
sh
mount
printenv
mkdir
bmgr
wimaxDhcpRelease
umount
mke2fs_recvy
dnsmasq
input
df
ioctl
am
wimaxDumpLogcat
app_process
chown
htc_timezonetest
service
netd
ls
netsharing
cam_ins_spmo
mm-venc-omx-test
dalvikvm
ser2net
dmagent
shutdown
ndc
dumpsys
mediaserver
vold
sequansd
awb_camera
dd
keypress
cmp
mscompress
wimaxDumpLastKmsg
mtpd
watchprops
ok, so "su" is in there... you should be able to
Code:
adb shell
su
and it give you a #
try opening SuperUser.apk on your phone, THEN doing the above commands. a pop up should come up on your phone saying to allow root to su
regaw_leinad said:
ok, so "su" is in there... you should be able to
Code:
adb shell
su
and it give you a #
try opening SuperUser.apk on your phone, THEN doing the above commands. a pop up should come up on your phone saying to allow root to su
Click to expand...
Click to collapse
that worked, now to get remount do i have to always use that previous command you wrote?
I have an app that checks for root permissions and refuses to run. I am running a Blazer pre-rooted ROM. I have tried the following:
adb shell
mount -o remount,rw /system
busybox cp /system/xbin/su /sdcard
busybox mv /system/xbin/su /system/xbin/su2
When I do this several apps that require root such as titanium backup fail for obvious reasons. The phone is still rooted however. I know this because adb shell is still defaulting me to a root prompt, even after reboot. My questions are:
1) If I mv the su binary to something random how does the phone achieve root upon reboot?
2) Would it be possible to su to a different uid (the normal non-root user) and then launch my app or change the entire android environment to it?
3) What is the Superuser app called in this ROM? There is no /system/app/Superuser.apk. I would like to try to uninstall it.
Thanks,
Ownage
Ownage1100 said:
I have an app that checks for root permissions and refuses to run. I am running a Blazer pre-rooted ROM. I have tried the following:
adb shell
mount -o remount,rw /system
busybox cp /system/xbin/su /sdcard
busybox mv /system/xbin/su /system/xbin/su2
When I do this several apps that require root such as titanium backup fail for obvious reasons. The phone is still rooted however. I know this because adb shell is still defaulting me to a root prompt, even after reboot. My questions are:
1) If I mv the su binary to something random how does the phone achieve root upon reboot?
2) Would it be possible to su to a different uid (the normal non-root user) and then launch my app or change the entire android environment to it?
3) What is the Superuser app called in this ROM? There is no /system/app/Superuser.apk. I would like to try to uninstall it.
Thanks,
Ownage
Click to expand...
Click to collapse
did you try hide my root from the market? it works well with google wallet..
https://play.google.com/store/apps/...wsMSwxLDEsImNvbS5hbXBob3Jhcy5oaWRlbXlyb290Il0.
Ownage1100 said:
I have an app that checks for root permissions and refuses to run. I am running a Blazer pre-rooted ROM. I have tried the following:
adb shell
mount -o remount,rw /system
busybox cp /system/xbin/su /sdcard
busybox mv /system/xbin/su /system/xbin/su2
When I do this several apps that require root such as titanium backup fail for obvious reasons. The phone is still rooted however. I know this because adb shell is still defaulting me to a root prompt, even after reboot. My questions are:
1) If I mv the su binary to something random how does the phone achieve root upon reboot?
2) Would it be possible to su to a different uid (the normal non-root user) and then launch my app or change the entire android environment to it?
3) What is the Superuser app called in this ROM? There is no /system/app/Superuser.apk. I would like to try to uninstall it.
Thanks,
Ownage
Click to expand...
Click to collapse
Voodoo OTA RootKeeper also allows you to temporarily unroot and then re-root.
Hello everyone.
I have been able to modify the framework-res.apk file to enable bluetooth tethering for UAMDL from T-Mobile
While I was making the changes in there I also removed from it the call to tethering provisioning and changed the csc files needed too.
So this is for stock UAMDL T-Mobile rooted roms.
I have included the files below to install it if you want.
It does go without saying to backup everything first.
Download from Google Drive
Use the following ADB commands to successfully copy over to the framework folder. Does need to be done via ADB.
Copy new framework-res-mod.apk to root of internal sd card.
adb shell stop (this will cause the screen on your phone to go black that is fine)
adb shell mount -o remount,rw /system
adb shell cp /sdcard/framework-res-mod.apk /system/framework/framework-res.apk
adb shell chmod 644 /system/framework/framework-res.apk
adb shell start (screen will come back on and look like phone is booting again)
after that you can use your favorite root file brower to copy and replace the files customer.xml and feature.xml in the system/csc folder.
If after this you are having problems with getting google play to install apps you might need to master reset.
I want to thank elesbb for help with getting this thing to be able to be compiled and also with the adb instructions to get it copied to the phone without needing a custom recovery but just root.
Awesome man. One question though, so wireless tethering works or only bluetooth tethering?
Yes.
Wireless hotspot, bluetooth (my main goal) and wired tether are working.
Ooops I goofed in the customer.xml file with the APN used for tethering.
I used apn epc.tmobile.com when it should be epc.t-mobile.com
For the time being you can adjust that I will upload a fixed copy tomorrow when I can be at my computer again.
Actually was able to edit and reupload from phone.
It is fixed now.
Apk File not shared for download.
Sorry about that.
Should be fixed.
Give it a try again.
this is what I get
c:\windows-sdk\platform-tools>adb shell stop <<<< phone screen doesnt go black
c:\windows-sdk\platform-tools>adb shell mount -o remount,rw /system
mount: Operation not permitted
c:\windows-sdk\platform-tools>adb shell cp /sdcard/framework-res-mod.apk /system
/framework/framework-res.apk
cp: /system/framework/framework-res.apk: Read-only file system
c:\windows-sdk\platform-tools>adb shell chmod 644 /system/framework/framework-re
s.apk
Unable to chmod /system/framework/framework-res.apk: Read-only file system
am i missing something here?
Sounds like the kernel is not running in insecure mode.
Try installing and enabling insecure adbd with this app and try again
http://forum.xda-developers.com/showthread.php?t=1687590
TheArtiszan said:
Sounds like the kernel is not running in insecure mode.
Try installing and enabling insecure adbd with this app and try again
http://forum.xda-developers.com/showthread.php?t=1687590
Click to expand...
Click to collapse
Thanks man we'll give it a shot after I get off work tonight and let you know how it happens
Sent from my SGH-M919 using xda premium
So far I thought I had bluetooth working on this since it shows as a option in the tethering program but when go to pair with something it does not see or be able to use that profile for internet even though it is enabled on the phone.
Wasn't able to test at the time since I had to send in my tablet but have came to find out that this was not working.
I will continue to try and see what I missed or what I can find.
If anyone has a idea that would be helpful thank you.
Is it possible to implement mod on this Framework mate
http://www.mediafire.com/download/z98oy0q9axmcavv/framework-res.apk
** DISCLAIMER: I AM NOT A DEVELOPER. I DO THIS AS A HOBBY AND SHARE MY FINDINGS IN CASE SOMEONE ELSE FINDS THEM USEFUL. **
** THIS WORKED ON MY DEVICE BUT IT MAY NOT WORK ON YOURS. APPLY AT YOUR OWN RISK **** This method is designed for Amazon fire phone. Do not use it on other devices unless you are familiar with Android file system and are able to apply proper modifications. **
This has been tested with the unlocked US version running 4.6.1.
This procedure installs superSU root binaries and busybox on your system.
Requirements
Make sure your PC can communicate with your fire phone via adb.
The success of this method depends on following the procedure very carefully. So read the instructions and make sure you understand every step before you try it.
Procedure
1- Install and run Kingroot 4.0. You can google and download it or you can use the one in the attached zip file. When Kingroot runs it is all in Chinese, but basically you need to be connected to the internet for it to work. It will do its thing and show progress up to 100% after which you can exit the program. Now your phone is rooted. The following steps replaces the Kinguser with SuperSU.
2- Unzip the attached file in your adb directory and then open an adb terminal and make sure the PC can see your phone (you can check that by typing adb devices). Then type the following:
Code:
adb push su /data/local/tmp
adb push busybox /data/local/tmp
adb shell
3- In the shell that you get type the following and make sure you give the permission when the phone prompts you:
Code:
su
4- Continue by typing the following commands:
Code:
mount -o remount,rw /system
cat /data/local/tmp/su >/system/xbin/daemonsu && chmod 0755 /system/xbin/daemonsu
cat /data/local/tmp/busybox >/system/xbin/busybox && chmod 0755 /system/xbin/busybox
daemonsu -d &
The key is to keep this session running while you continue with the rest, so be careful with typos and monitor this window for any errors.
5- At this point, leave the adb terminal window running and go to your phone, open the Kinguser app, open settings (the wheel at the top right corner of the screen), Root authorization setting, and Remove Root permission. The app will self-uninstall.
6- Uninstall the other two Kingroot programs that are still on your phone (KingRoot and the other one with the blue icon and Chinese text under it).
7- Back to the adb terminal, and type the following:
Code:
cat /data/local/tmp/su >/system/xbin/su && chmod 0755 /system/xbin/su
busybox chattr -ia /system/xbin/ku.sud
busybox chattr -ia /system/xbin/supolicy
rm /system/xbin/ku.sud
rm /system/xbin/supolicy
rm /system/bin/rt.sh
rm /system/bin/install-recovery.sh
rm /system/bin/shipclean
rm /system/bin/start-ssh
busybox chattr -ia /system/etc/install-recovery.sh
busybox chattr -ia /system/etc/install-recovery.sh-ku.bak
rm /system/etc/install-recovery.sh
rm /system/etc/install-recovery.sh-ku.bak
rm /system/etc/install_recovery.sh
rm /system/usr/icu/icusuflag.conf
busybox chattr -ia /system/usr/iku/isu
rm -rf /system/usr/iku
rm /system/kroot_*
rm /sdcard/kr-stock-conf
rm -rf /sdcard/Kingroot
rm -rf /data/data-lib/com.kingroot.RushRoot
rm -rf /data/data-lib/com.kingroot.kinguser
rm -rf /data/data-lib/king
Again, leave the adb terminal window running and go to your phone.
8- Install superSU (from the attached file) on your phone, run it, and let it update the SU binary.
9- Reboot the phone. After about 5 minutes your root is ready.
Hint: It is a good idea to disable Amazon device client platform, DCP platform contracts, and two apps called System Updates in Amazon settings. They are responsible for regular updates, constant chatter with Amazon servers, and possible patching of your root exploit. Also disable Kinesis service which is responsible for major battery drain and heating. You will find it under settings, display, configure motion and gesture settings. Disable all.
Troubleshooting
1- Most of the problems that I noticed people have encountered is due to not reading the instructions fully. So make sure you read the OP word by word.
2- If you miss a step or mess up something go back to installing Kingroot and start over from the beginning.
3- If instant video or some other Amazon app doesn't work it is because you should run them at least once prior to rooting the phone.
4- Finally, I noticed that with an AT&T sim card in the phone Kingroot fails (why am I not surprised?) Either a reboot occurs in the middle of rooting or it completes the cycle without accomplishing root. If that occurs, my best advice is to change your phone company. If that fails, you may need to factory reset your phone or even install the firmware from scratch and try again without the sim card.
Okay. Working. I tried it 2 Times because i get in troubles with the SuperSu App.
After First Time i Cant open it anymore after adb shell.
Second Time i installed SuperSu, but after adbshell the app was gone (!?) - but i installed it again with adb shell before reboot. Now SuperSu is Working.
And now tell me how to change the FireOS to a Android Status Bar with Notifications, and youre my Hero ;D
najoor said:
** DISCLAIMER: I AM NOT A DEVELOPER. I DO THIS AS A HOBBY AND SHARE MY FINDINGS IN CASE SOMEONE ELSE FINDS THEM USEFUL. **
** THIS WORKED ON MY DEVICE BUT IT MAY NOT WORK ON YOURS. APPLY AT YOUR OWN RISK **
This has been tested with the unlocked US version running 4.6.1.
Requirements
Make sure your PC can communicate with your fire phone via adb.
The success of this method depends on following the procedure very carefully. So read the instructions and make sure you understand every step before you try it.
Procedure
1- Install and run Kingroot 4.0. You can google and download it or you can use the one in the attached zip file. When Kingroot runs it is all in Chinese, but basically you need to be connected to the internet for it to work. It will do its thing and show progress up to 100% after which you can exit the program. Now your phone is rooted. The following steps replaces the Kinguser with SuperSU.
2- Unzip the attached file in your adb directory and then open an adb terminal and make sure the PC can see your phone (you can check that by typing adb devices). Then type the following:
Code:
adb push su /data/local/tmp
adb push busybox /data/local/tmp
adb shell
3- In the shell that you get type the following and make sure you give the permission when the phone prompts you:
Code:
su
4- Continue by typing the following commands:
Code:
mount -o remount,rw /system
cat /data/local/tmp/su >/system/xbin/daemonsu && chmod 0755 /system/xbin/daemonsu
cat /data/local/tmp/busybox >/system/xbin/busybox && chmod 0755 /system/xbin/busybox
daemonsu -d &
The key is to keep this session running while you continue with the rest, so be careful with typos and monitor this window for any errors.
5- At this point, leave the adb terminal window running and go to your phone, open the Kinguser app, open settings, Root authorization setting, and Remove Root permission .
6- Uninstall the other two Kingroot programs that are still on your phone (KingRoot and the other one with the blue icon and Chinese text under it).
7- Back to the adb terminal, and type the following:
Code:
cat /data/local/tmp/su >/system/xbin/su && chmod 0755 /system/xbin/su
busybox chattr -ia /system/xbin/ku.sud
busybox chattr -ia /system/xbin/supolicy
rm /system/xbin/ku.sud
rm /system/xbin/supolicy
rm /system/bin/rt.sh
rm /system/bin/install-recovery.sh
busybox chattr -ia /system/etc/install-recovery.sh
rm /system/etc/install-recovery.sh
busybox chattr -ia /system/etc/install-recovery.sh-ku.bak
rm /system/etc/install-recovery.sh-ku.bak
rm /system/kroot_*
rm /sdcard/kr-stock-conf
rm -rf /sdcard/Kingroot
rm /system/usr/icu/icusuflag.conf
busybox chattr -ia /system/usr/iku/isu
rm -rf /system/usr/iku
Again, leave the adb terminal window running and go to your phone.
8- Install superSU (from the attached file) on your phone, run it, and let it update the SU binary.
9- Reboot the phone. After about 5 minutes your root is ready.
Hint: It is a good idea to disable Amazon device client platform, DCP platform contracts, and two apps called System Updates in Amazon settings.
Click to expand...
Click to collapse
Not sure what I'm doing wrong but everything works till I get to rm stage of step 7. Im getting 255 read only file system error. Any ideas what I did wrong. since it didnt work to I have reinstall Kingroot and start over or do I start over from the adb shell part?
Viperise152 said:
Not sure what I'm doing wrong but everything works till I get to rm stage of step 7. Im getting 255 read only file system error. Any ideas what I did wrong. since it didnt work to I have reinstall Kingroot and start over or do I start over from the adb shell part?
Click to expand...
Click to collapse
Do you close the adb window between steps 4 and 7? Step 7 should be continued in the window that you left open in step 4.
Do you get any error message after you type each command in part 4?
To redo the process you should install the Kingroot again and stay overt from the beginning.
I did not get any errors for part 4 just when I get to the first rm command in part 7, I'm getting (rm failed for /system/xbin/ku.sud, Read-only file system). Is that normal?
FIXED!!!
Ok i was not following this step properly "open the Kinguser app, open settings, Root authorization setting, and Remove Root permission ." I was not doing through that Root authorization setting which was a few slots down.
Viperise152 said:
Not sure what I'm doing wrong but everything works till I get to rm stage of step 7. Im getting 255 read only file system error. Any ideas what I did wrong. since it didnt work to I have reinstall Kingroot and start over or do I start over from the adb shell part?
Click to expand...
Click to collapse
Please copy and paste the entire content of the adb terminal up to the point that you get the error message and send it to me via pm so I can debug it.
najoor said:
Please copy and paste the entire content of the adb terminal up to the point that you get the error message and send it to me via pm so I can debug it.
Click to expand...
Click to collapse
I still had this page open while I was giving it another go. I figured out what i was doing wrong. The " open the Kinguser app,open settings, Root authorization setting, and remove root permission." part I was just opening Kinguser settings and hitting the big center button turning it off. Did'nt realize i had to go down a few slots to the Root Authorization Setting then hit the Remove Root Permission. After i did it right Kinguser disappeared unistalled the other 2 apps. Everything after that work fine then. Thanks for trying to help me out. Maybe my confusion will help others.
Viperise152 said:
I still had this page open while I was giving it another go. I figured out what i was doing wrong. The " open the Kinguser app,open settings, Root authorization setting, and remove root permission." part I was just opening Kinguser settings and hitting the big center button turning it off. Did'nt realize i had to go down a few slots to the Root Authorization Setting then hit the Remove Root Permission. After i did it right Kinguser disappeared unistalled the other 2 apps. Everything after that work fine then. Thanks for trying to help me out. Maybe my confusion will help others.
Click to expand...
Click to collapse
Thanks for updating with what you were doing wrong. I was having the same issue. Cheers!
funkadelik said:
Thanks for updating with what you were doing wrong. I was having the same issue. Cheers!
Click to expand...
Click to collapse
And me too I should have read your post instead of bugging najoor who has been a great help to resolve my SuperSU
installation
Great thread :good::good:
thx for the guide.
can you explain why it is better to have SuperSu. What is wrong with kingsu?
planning to do this soon, cheers for the guide
so what is safe to remove out of the stock apps
veti said:
thx for the guide.
can you explain why it is better to have SuperSu. What is wrong with kingsu?
Click to expand...
Click to collapse
King user might even be a better SU than superSU, who knows? The problem is that we don't know kinguser. We don't know who wrote it, we don't know what kind of information it gathers, we don't know if it puts a backdoor exploit in your OS, etc. Super SU is a tool that we have used for years. We know exactly what supersu does and who wrote it. We can even communicate with him on xda. Chainfire, the author of SuperSU even has a weblog that he often uses to talk about the intricacies of designing a tool like superSU. There is almost nothing unknown or suspicious about superSU.
On the contrary kingroot/kinguser seems to be intrusive and sneaky. The first thing it does after rooting your phone is to install some random app on it that has nothing to do with rooting and at best I can describe it as bloat. It saves files and folders all over your phone for no apparent reason. Then, it does everything it can to prevent you from removing it. In effect, the only straightforward way to remove it is to give up root, and even then it very suspiciously leaves some executable files behind that God knows if they are sleeper cells or what. To devise the procedure in the OP I had to go through an extensive search to find every little carp that king user has planted into the system and truth be told I will not be surprised if I discover more hidden gems left behind.
The corrected op guide worked great. I had to tap a blue rectangle at two different times to get kingroot to finish (get to a screen that had 100% on it), but other than that, everything worked.
najoor said:
King user might even be a better SU than superSU, who knows? The problem is that we don't know kinguser. We don't know who wrote it, we don't know what kind of information it gathers, we don't know if it puts a backdoor exploit in your OS, etc. Super SU is a tool that we have used for years. We know exactly what supersu does and who wrote it. We can even communicate with him on xda. Chainfire, the author of SuperSU even has a weblog that he often uses to talk about the intricacies of designing a tool like superSU. There is almost nothing unknown or suspicious about superSU.
On the contrary kingroot/kinguser seems to be intrusive and sneaky. The first thing it does after rooting your phone is to install some random app on it that has nothing to do with rooting and at best I can describe it as bloat. It saves files and folders all over your phone for no apparent reason. Then, it does everything it can to prevent you from removing it. In effect, the only straightforward way to remove it is to give up root, and even then it very suspiciously leaves some executable files behind that God knows if they are sleeper cells or what. To devise the procedure in the OP I had to go through an extensive search to find every little carp that king user has planted into the system and truth be told I will not be surprised if I discover more hidden gems left behind.
Click to expand...
Click to collapse
Thank you _so_ much for your effort. I was doing some research too in advance prior to installing kingroot, but didn't get near as much useful information. Sniffing the network connection for any suspicious behaviour via wireshark and my router wasn't successful at all, as they use https.
I came up with the idea that they could have patched some of the system-apps to load an payload even after you tried to "delete everything"(tm). I am currently checking the MD5 and SHA-1 checksum of a identical, second Firephone without root.
---------- Post added at 09:09 PM ---------- Previous post was at 09:05 PM ----------
Also the Mods should pin your post. I totally agree that KingRoot uses intrusive behaviour - as it seems mostly for statistics, but anyway - and should be replaced with the method described in the OP.
EDIT: The MD5 checksum of an unrooted firephone is identical. The System apps might not have been replaced or touched at all. I didn't got a easy chance to check all apps with the SHA-1 checksum though.
Followed the directions and got the root with 0 issues
Just saw this article saying root is now achievable w/ SuperSU via Towelroot: http://dottech.org/180812/how-to-root-amazon-fire-phone-on-android-4-4-kitkat-guide/
Can anyone verify?
amf100 said:
Just saw this article saying root is now achievable w/ SuperSU via Towelroot: http://dottech.org/180812/how-to-root-amazon-fire-phone-on-android-4-4-kitkat-guide/
Can anyone verify?
Click to expand...
Click to collapse
No, it doesn't work. When you run it, the towelroot app pops up a message saying the phone is currently not supported.
Hmph! That's too bad. I wasn't with my fire phone to check for myself. The internet is so weird lol. Why make a whole page with instructions for nothing? Ugh lol
rm /system/bin/rt.sh
Click to expand...
Click to collapse
This part is not working for me. Can't seem to remove it with root explorer either. Any tips?
Im on 4.6.1 with SuperSu. If im Sideload 4.6.1 again and do an Factory Reset. Is root gone? Because Amazon send me New One Because Hardware issues
I've been looking for a way how to have navigation keys back light always on while screen on (I was distracted by blinking caused by short timeout value) and at the same time always off for ebook reading and video watching and the solution should be simple and future proof (working on Nougat and Oreo as well). It is partially possible with Xposed and Gravitybox, but I am preparing myself for Oreo update, so I want to replace as many of its functions as possible. Long story short, use Tasker with following:
1. Event, display on, task:
run shell command as root, "chmod 644 /sys/class/leds/button-backlight/brightness"
run shell command as root, "echo 10 > /sys/class/leds/button-backlight/brightness"
run shell command as root, "chmod 444 /sys/class/leds/button-backlight/brightness"
2. Event, display off, task:
run shell command as root, "chmod 644 /sys/class/leds/button-backlight/brightness"
run shell command as root, "echo 0 > /sys/class/leds/button-backlight/brightness"
run shell command as root, "chmod 444 /sys/class/leds/button-backlight/brightness"
3. Application, ebook reader, youtube,..
Enter task
run shell command as root, "chmod 644 /sys/class/leds/button-backlight/brightness"
run shell command as root, "echo 0 > /sys/class/leds/button-backlight/brightness"
run shell command as root, "chmod 444 /sys/class/leds/button-backlight/brightness"
Exit task
run shell command as root, "chmod 644 /sys/class/leds/button-backlight/brightness"
run shell command as root, "echo 10 > /sys/class/leds/button-backlight/brightness"
run shell command as root, "chmod 444 /sys/class/leds/button-backlight/brightness"
Hi.
Is this working?
I really hate buttons light and would like to shut them off for good.
I guess that running this script after booting should work (if yours is working)
echo 0 > /sys/class/leds/button-backlight/brightness
What do you think?
Thanks in advance.
pantezuma said:
Hi.
Is this working?
I really hate buttons light and would like to shut them off for good.
I guess that running this script after booting should work (if yours is working)
echo 0 > /sys/class/leds/button-backlight/brightness
What do you think?
Thanks in advance.
Click to expand...
Click to collapse
I am still using this method without any issues. I even enhanced it with lowering the keys back light intensity during night, quite handy in total darkness
To disable back light permanently after boot use this:
1. run shell command as root, "chmod 644 /sys/class/leds/button-backlight/brightness"
2. run shell command as root, "echo 0 > /sys/class/leds/button-backlight/brightness"
3. run shell command as root, "chmod 444 /sys/class/leds/button-backlight/brightness"
Explanation:
1. make sure that we have RW configuration rights (I would say that this is optional in your case, but it won't hurt anything)
2. disable brightness
3. remove RW configuration rights (otherwise system apps can and will enable the back light again when you turn screen off and on)
Thanks for you fast reply.
I'm still trying to understand how magisk works with scripting (and the permissions you mention that I didn't know were required).
I come from an old S2 running custom Jelly Bean and all this systemless stuff is new to me as previously I used to put scripts in init.d and that was all I needed, but now I don't want to modify system partition.
I am using Magisk for root and few build.prop tweaks, not sure how init.d works with it. In the past I had luck with Script manager - it was enough to create a script file, open it with Script manager and set it as "run as root and at boot time". Or you can still use an automation app which can run shell commands (Tasker has this feature for sure).
_mysiak_ said:
I am using Magisk for root and few build.prop tweaks, not sure how init.d works with it. In the past I had luck with Script manager - it was enough to create a script file, open it with Script manager and set it as "run as root and at boot time". Or you can still use an automation app which can run shell commands (Tasker has this feature for sure).
Click to expand...
Click to collapse
As far as I know, anything you put under /magisk/.core/post-fs-data.d would be ran as a script after boot.
But as I said before, just starting with this and may be talking nonsense.
I really wouldn't like to install tasker or anything else as I just want them off for the rest of my life!
Thanks!
PD: Sorry for my english.
_mysiak_ said:
I am using Magisk for root and few build.prop tweaks, not sure how init.d works with it. In the past I had luck with Script manager - it was enough to create a script file, open it with Script manager and set it as "run as root and at boot time". Or you can still use an automation app which can run shell commands (Tasker has this feature for sure).
Click to expand...
Click to collapse
Hey!
I was able to run your commands via ADB and everything is working perfect (I don't know why but they didn't work via terminal emulator)
Only issue is that whenever I reboot my phone everything is lost.
My problem is that I'm unable to make a script that runs at boot time (I'm pretty ignorant in scripting and where to put that script).
Any help or suggestions will be highly appreciated!
pantezuma said:
Hey!
I was able to run your commands via ADB and everything is working perfect (I don't know why but they didn't work via terminal emulator)
Only issue is that whenever I reboot my phone everything is lost.
My problem is that I'm unable to make a script that runs at boot time (I'm pretty ignorant in scripting and where to put that script).
Any help or suggestions will be highly appreciated!
Click to expand...
Click to collapse
Don't forget to add "su" as a first command if you are running it from terminal emulator. Try Script manager mentioned before, it can do what you want quite easily - just put all commands in a file, save it somewhere on the internal SD, open it from SM, set as run at boot and run as root and that's it. You can run your scripts on demand as well, so you can check quickly if it's working fine.
I remembered that had bought Tasker a few years ago (but never really used it) so I created a task to perform the above mentioned commands at boot.
Anyway, I'm still unable to make a script and run it via terminal emulator, and that's really annoying!
I'll keep investigating.
Thanks a lot!
pantezuma said:
Anyway, I'm still unable to make a script and run it via terminal emulator, and that's really annoying!
Click to expand...
Click to collapse
What is the exact content of the script file, what are the file permissions and how do you try to run it?
_mysiak_ said:
What is the exact content of the script file, what are the file permissions and how do you try to run it?
Click to expand...
Click to collapse
Hi!
This script is something like this:
#!/bin/sh
su
chmod 644 /sys/class/leds/button-backlight/brightness
echo 0 > /sys/class/leds/button-backlight/brightness
chmod 444 /sys/class/leds/button-backlight/brightness
Named it "lights sh" and put in on my internal SD card,
Then, with terminal emulator browsed to its location and tried to run it via "./lights sh"
I got "Permission denied" and also some errors like "backlight not found".
Couldn't find the way to change permissions (Reading a little more found that internal SD card is mounted as non executable. Is that correct?
Later I moved the file to DATA and changed permissions to 755 obtaining the same results.
As you may notice I'm a complete noob regarding scripting and permissions and I apologize for that!
Thanks in advance!
pantezuma said:
Hi!
This script is something like this:
#!/bin/sh
su
chmod 644 /sys/class/leds/button-backlight/brightness
echo 0 > /sys/class/leds/button-backlight/brightness
chmod 444 /sys/class/leds/button-backlight/brightness
Named it "lights sh" and put in on my internal SD card,
Then, with terminal emulator browsed to its location and tried to run it via "./lights sh"
I got "Permission denied" and also some errors like "backlight not found".
Couldn't find the way to change permissions (Reading a little more found that internal SD card is mounted as non executable. Is that correct?
Later I moved the file to DATA and changed permissions to 755 obtaining the same results.
As you may notice I'm a complete noob regarding scripting and permissions and I apologize for that!
Thanks in advance!
Click to expand...
Click to collapse
I've just made a very simple script:
1.
#!/bin/sh
echo hello world!
2. saved it to the internal sd card as "script.sh"
3. chmod 755 script.sh
4. running it as "./script.sh" gives the permission denied error, but "sh script.sh" works fine
In your case, remove "su" command from the script file itself, but run it in terminal before calling the script instead. Or just use script manager
Thanks, working great Tasker profiles...
how to lower the brightness of thw buttons? on night the light is so bright and on the white variant looks horrible xD
deewfrank said:
how to lower the brightness of thw buttons? on night the light is so bright and on the white variant looks horrible xD
Click to expand...
Click to collapse
If you have tasker:
Code:
run shell command as root, "chmod 644 /sys/class/leds/button-backlight/brightness"
if %LIGHT > 3
run shell command as root, "echo 10 > /sys/class/leds/button-backlight/brightness"
else
run shell command as root, "echo 1 > /sys/class/leds/button-backlight/brightness"
end if
run shell command as root, "chmod 444 /sys/class/leds/button-backlight/brightness"
It will set brightness based on the surrounding light level.