Develop Bugs

TWRP 2.6.3.3 Problems

Has anyone successfully installed TWRP 2.6.3.3 (http://techerrata.com/browse/twrp2/m7) on your HTC One? I have tried all three methods on installing it and I can't seem to get it to stick on my phone.
Method one: Goo.im app
From the menu, selecting Install OpenRecoveryScript and selecting Yes results in No recoveries were found for your device.
Method two: ADB / Terminal
Opened up an ADB shell and used dd if=/sdcard/twrp.img of=/dev/block/mmcblk0p34 which successfully installed it. Rebooting to recovery goes to the HTC screen that says Entering recovery and then reboots the device for a normal startup.
Method three: Fastboot
Booting into the bootloader and selecting the fastboot option in order to run fastboot flash recovery recoveryfilename.img successfully installed. Rebooting to recovery goes to the HTC screen that says Entering recovery and then reboots the device for a normal startup.
Holding volume down + power and selecting Recovery from the bootloader also reboots to the HTC screen that says Entering recovery and then reboots the device for a normal startup.
No idea how to get this installation to stick. Can anyone help out?

the twrp for m7 doesn't work.
the twrp for m7vzw is the one you need.

raphytaffy said:
Has anyone successfully installed TWRP 2.6.3.3 (http://techerrata.com/browse/twrp2/m7) on your HTC One? I have tried all three methods on installing it and I can't seem to get it to stick on my phone.
Method one: Goo.im app
From the menu, selecting Install OpenRecoveryScript and selecting Yes results in No recoveries were found for your device.
Method two: ADB / Terminal
Opened up an ADB shell and used dd if=/sdcard/twrp.img of=/dev/block/mmcblk0p34 which successfully installed it. Rebooting to recovery goes to the HTC screen that says Entering recovery and then reboots the device for a normal startup.
Method three: Fastboot
Booting into the bootloader and selecting the fastboot option in order to run fastboot flash recovery recoveryfilename.img successfully installed. Rebooting to recovery goes to the HTC screen that says Entering recovery and then reboots the device for a normal startup.
Holding volume down + power and selecting Recovery from the bootloader also reboots to the HTC screen that says Entering recovery and then reboots the device for a normal startup.
No idea how to get this installation to stick. Can anyone help out?
Click to expand...
Click to collapse
I used Flashify from the Play Store and it worked perfectly. The recovery held and was able to flash CM11. My fastboot has been screwed ever since I upgraded to Win8.1 so Ive been using that app as an alternative.
EDIT- Using the correct one as the previous post alluded to would also be a great idea. I didn't even catch that.

wiredout46 said:
the twrp for m7 doesn't work.
the twrp for m7vzw is the one you need.
Click to expand...
Click to collapse
Ah thanks, didn't even notice that. Working great now. If anyone comes to this thread looking for the m7vzw image, it can be found here: http://goo.im/devs/Flyhalf205/M7VZW

raphytaffy said:
Ah thanks, didn't even notice that. Working great now. If anyone comes to this thread looking for the m7vzw image, it can be found here: http://goo.im/devs/Flyhalf205/M7VZW
Click to expand...
Click to collapse
2.6.3.3 is in the verizon htc one original development subforum. just flashed it and it works fine.

Guys help! Installed TWRP 2.6.3.3. specifically for installation Maximus HD after installation did WIPE and accidentally formatted storage on which lay installer Maximus 30 HD, how do I copy installer again on storage, because mode Bootloader - Fastboot USB can not get access to it?

How come I can't find VZW TWRP 2.6.3.3?
and only can find 2.6.3.4?
sorry, just curious

andybones said:
How come I can't find VZW TWRP 2.6.3.3?
and only can find 2.6.3.4?
sorry, just curious
Click to expand...
Click to collapse
2.6.3.3 had the charging bug no?
if you need it, i have a copy of it.

Problem
Hey
I was flashing my htc to CM11 and it says that flash was successful, but now my htc one stuck when you try to power on it says only HTC quietly brilliant and wouldnt go on. What should I do ?

peca_slo said:
Hey
I was flashing my htc to CM11 and it says that flash was successful, but now my htc one stuck when you try to power on it says only HTC quietly brilliant and wouldnt go on. What should I do ?
Click to expand...
Click to collapse
Did you wipe data before or after flashing?

Flyhalf205 said:
Did you wipe data before or after flashing?
Click to expand...
Click to collapse
yes i did i have rot the cm10.2 but it stuck on logo screen of cm

peca_slo said:
yes i did i have rot the cm10.2 but it stuck on logo screen of cm
Click to expand...
Click to collapse
You did flash the Verizon recovery and Verizon rom?

Flyhalf205 said:
You did flash the Verizon recovery and Verizon rom?
Click to expand...
Click to collapse
Yes I did but I think this is not a good verzion for me cuz i have m7-ul model, but now I can do nothing with the phone. It would be good if i could get it back to stock

peca_slo said:
Yes I did but I think this is not a good verzion for me cuz i have m7-ul model, but now I can do nothing with the phone. It would be good if i could get it back to stock
Click to expand...
Click to collapse
Might be better to go to the ul variant thread at http://forum.xda-developers.com/htc-one

Can't Flash TWRP after installing MaximusHD
So I am a noob at this stuff and successfully flashed TWRP 2.6.3.3. I installed the MaxHD ROM shortly after following all instructions that I could find. I ran into bootloop and had to revert to an old firmware then flashed the current firmware and viola MaxHD booted right up. However, now I can not flash TWRP back as my recovery. Everytime I flash it and go into recovery it goes into MaxHD ROM. If anyone has any ideas they are much appreciated.
Also, I have read for over three weeks on these boards before posting even my first post so I have tried to research the problem if anyone was wondering that.

Jaayyrod said:
So I am a noob at this stuff and successfully flashed TWRP 2.6.3.3. I installed the MaxHD ROM shortly after following all instructions that I could find. I ran into bootloop and had to revert to an old firmware then flashed the current firmware and viola MaxHD booted right up. However, now I can not flash TWRP back as my recovery. Everytime I flash it and go into recovery it goes into MaxHD ROM. If anyone has any ideas they are much appreciated.
Also, I have read for over three weeks on these boards before posting even my first post so I have tried to research the problem if anyone was wondering that.
Click to expand...
Click to collapse
Is MaxHD a Verizon rom? That could be an issue if it's not. Also, the latest TWRP is 2.7.0.8. Haven't had any issues with it. Are you flashing it with fastboot commands? You might try the app Flashify.
Sent from my HTC6500LVW using Tapatalk

brholt6 said:
Is MaxHD a Verizon rom? That could be an issue if it's not. Also, the latest TWRP is 2.7.0.8. Haven't had any issues with it. Are you flashing it with fastboot commands? You might try the app Flashify.
Sent from my HTC6500LVW using Tapatalk
Click to expand...
Click to collapse
Good call...it is not for the Verizon HTC One. Thanks much.
It doesn't say it's not in the write up about the ROM...I had to dig into the replies to see if anyone else asked.

[Q] Problems with recovery

Hi, i bought a One X 2 days ago and i unlocked the bootloader, i have 4.2.2 jellybean, i need to root my phone so i downloaded the X One All In One Tool Kit 2.5 and i installed the recovery (TWRP) but when i boot into recovery it just stays in a black screen all the time, it won't pass that, i have to reboot it to get into the system again, i tried installing the CWM but it's the exact same thing, black screen, i won't even appear the CWM logo or the TWRP logo, it just stays in black all along.... i try erasing the cache and nothing, i installed the recovery like 10 times now and it won't work... Why is this? I did everything like the tutorial, i also try directly with the cmd and it's the exact same thing... I really need to root my phone.
Thanks in advance for the help

GaborimboX said:
Hi, i bought a One X 2 days ago and i unlocked the bootloader, i have 4.2.2 jellybean, i need to root my phone so i downloaded the X One All In One Tool Kit 2.5 and i installed the recovery (TWRP) but when i boot into recovery it just stays in a black screen all the time, it won't pass that, i have to reboot it to get into the system again, i tried installing the CWM but it's the exact same thing, black screen, i won't even appear the CWM logo or the TWRP logo, it just stays in black all along.... i try erasing the cache and nothing, i installed the recovery like 10 times now and it won't work... Why is this? I did everything like the tutorial, i also try directly with the cmd and it's the exact same thing... I really need to root my phone.
Thanks in advance for the help
Click to expand...
Click to collapse
Try Philz Touch recovery >>>> http://d-h.st/users/philz_touch/?fld_id=16046#files

hmmm
GaborimboX said:
Hi, i bought a One X 2 days ago and i unlocked the bootloader, i have 4.2.2 jellybean, i need to root my phone so i downloaded the X One All In One Tool Kit 2.5 and i installed the recovery (TWRP) but when i boot into recovery it just stays in a black screen all the time, it won't pass that, i have to reboot it to get into the system again, i tried installing the CWM but it's the exact same thing, black screen, i won't even appear the CWM logo or the TWRP logo, it just stays in black all along.... i try erasing the cache and nothing, i installed the recovery like 10 times now and it won't work... Why is this? I did everything like the tutorial, i also try directly with the cmd and it's the exact same thing... I really need to root my phone.
Thanks in advance for the help
Click to expand...
Click to collapse
its clearly not a problem with the Recovery, But i can suggest you something is try flashing it manually. tell me if you are able to do it. you can find how to flash a recovery manually by Command prompt in many Threads.

virgolib said:
Try Philz Touch recovery >>>>
Click to expand...
Click to collapse
That one did work! Thanks a lot!

Device will not flash any recovery in fastboot

My device decided to randomly encrypt itself after using the CM12 port that is available. How this happened is beyond me. Anyhow, I tried to do a factory reset... Nothing would mount because the device was encrypted. So, I thought it would be a great idea to flash a different recovery. By now, I have flashed over 6 recovery images (all different) even the stock. Fastboot says that the transfer went through successfully only to find when I try to boot into recovery, it boots into fastboot instead.
Yes the device is unlocked.
I don't know if there is a ROM on it, but when i try to start it normally, it wont boot past the splash screen (before the boot animation)
Please help, as this is the only phone I am stuck with for a long time

Here's a thread with people that have a similar problem. There are some suggestions of what to do in there, but personally none of them worked for me. I ended up having to send it back to Amazon.

iananderson said:
Here's a thread with people that have a similar problem. There are some suggestions of what to do in there, but personally none of them worked for me. I ended up having to send it back to Amazon.
Click to expand...
Click to collapse
Thank you. Still no success :/

BLEXXAR said:
My device decided to randomly encrypt itself after using the CM12 port that is available. How this happened is beyond me. Anyhow, I tried to do a factory reset... Nothing would mount because the device was encrypted. So, I thought it would be a great idea to flash a different recovery. By now, I have flashed over 6 recovery images (all different) even the stock. Fastboot says that the transfer went through successfully only to find when I try to boot into recovery, it boots into fastboot instead.
Yes the device is unlocked.
I don't know if there is a ROM on it, but when i try to start it normally, it wont boot past the splash screen (before the boot animation)
Please help, as this is the only phone I am stuck with for a long time
Click to expand...
Click to collapse
Never factory restore when you have a Custom ROM as it isn't made to reset with the devices stock hardware and causes things to go crazy.
Always use a nandroid of the original system with root, then unroot, then factory restore from that.
Also. YouTube search - HTC Desire 816 root unlock bootloader.
Use the .exe recovery from that video in fastboot at least twice without exiting fastboot or rebooting.
Now try the recovery.
Sent from my 710C using XDA Free mobile app

Didn't work. Thanks though.

BLEXXAR said:
Didn't work. Thanks though.
Click to expand...
Click to collapse
When you were on the stock recovery, could you wipe partitions?
Also what model do you have?

Recovery issue

Having a little issue still with my Recovery. Currently I have Philztouch 6.57.8 recovery and when I go to flash a new rom I get an error "this package supports bootloader 3.18.0.00 ...this device bootloader is 3.16.0.00".
I have tried to flash other recoveries (twrp) and after flashing and trying to go into recovery I just get the green words at the top "entering recovery" but it never actually comes up on the screen. Strangely enough when I do try to go into recovery and I get the green words at the top, my phone pops up on my computer as being connected. So I know something is going on but I just can't seem to get into recovery.
I am trying to not have to RUU, because the last time I tried that I seemed to do something wrong and trying not to brick my phone at this point.

You need to update your bootloader.
And anyway, you posed in the wrong thread he he.

harrishabitat said:
Having a little issue still with my Recovery. Currently I have Philztouch 6.57.8 recovery and when I go to flash a new rom I get an error "this package supports bootloader 3.18.0.00 ...this device bootloader is 3.16.0.00".
I have tried to flash other recoveries (twrp) and after flashing and trying to go into recovery I just get the green words at the top "entering recovery" but it never actually comes up on the screen. Strangely enough when I do try to go into recovery and I get the green words at the top, my phone pops up on my computer as being connected. So I know something is going on but I just can't seem to get into recovery.
I am trying to not have to RUU, because the last time I tried that I seemed to do something wrong and trying not to brick my phone at this point.
Click to expand...
Click to collapse
fastboot erase cache
And then stay away from Philz and update your bootloader.

kickassdave said:
You need to update your bootloader.
And anyway, you posed in the wrong thread he he.
Click to expand...
Click to collapse
Sorry about that, what thread should I post this into?
And I am going to be a total noob... if I am not S-Off can I still update my bootloader? If not how do I go about that?

Recovery Boots to Black Screen

So I clean flashed the newest community edition of Oxygen. Directly after I flashed it I flashed SuperSU. Everything goes well, no big error messages (I edited the updater-script for Oxygen). So I boot into Oxygen, and I can't find root. Everything is working beautifully but there's just no SuperSU. So I reboot to recovery, about to flash the zip again, but I get a black screen. Doesn't go away until I hold the power button for 15 seconds. Rebooted to fastboot, flashed TWRP recovery image. Same result, black screen when booting into recovery. Is there something I'm doing wrong? It's usable but I'd really like root....

Use this recovery http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560

daleski75 said:
Use this recovery http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Click to expand...
Click to collapse
Thanks so much!

camcorder123 said:
Thanks so much!
Click to expand...
Click to collapse
No problem.

I've got this same problem. Thanks for the TWRP fix!
Did you manage to get SuperSU / Root to work?

daleski75 said:
Use this recovery http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Click to expand...
Click to collapse
Thanks. It worked.

daleski75 said:
Use this recovery http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Click to expand...
Click to collapse
you are awesome, thanks so much this fixed my issue

recovery black screen and fastboot not working on computer
HI .
I am stuck with this black screen on recovery problem. And fastboot is not working on my system. Please help.

vijaysivakula said:
HI .
I am stuck with this black screen on recovery problem. And fastboot is not working on my system. Please help.
Click to expand...
Click to collapse
If your bootloader is unlocked and you can access the bootloader insteead of recovery just get fastboot working on your computer and you should be able to flash the TWRP listed above.

Fastboot not working
HermitDash said:
If your bootloader is unlocked and you can access the bootloader insteead of recovery just get fastboot working on your computer and you should be able to flash the TWRP listed above.
Click to expand...
Click to collapse
Fastboot not working on my office laptop. Funnily, it used to work earlier. Could someone help me with that? Or I will flash it over the weekend when i am home and revert to complete stock. The Community Build did not seem very attractive or useful in the few days I tried.

vijaysivakula said:
Fastboot not working on my office laptop. Funnily, it used to work earlier. Could someone help me with that? Or I will flash it over the weekend when i am home and revert to complete stock. The Community Build did not seem very attractive or useful in the few days I tried.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2317790
Minimal ADB and Fastboot.
Then just install drivers for your phone or do a search and you'll find it for the OnePlus 3

Worked For me too!
camcorder123 said:
So I clean flashed the newest community edition of Oxygen. Directly after I flashed it I flashed SuperSU. Everything goes well, no big error messages (I edited the updater-script for Oxygen). So I boot into Oxygen, and I can't find root. Everything is working beautifully but there's just no SuperSU. So I reboot to recovery, about to flash the zip again, but I get a black screen. Doesn't go away until I hold the power button for 15 seconds. Rebooted to fastboot, flashed TWRP recovery image. Same result, black screen when booting into recovery. Is there something I'm doing wrong? It's usable but I'd really like root....
Click to expand...
Click to collapse
Helped me too, thanks big time

LunaticWinchester said:
Helped me too, thanks big time
Click to expand...
Click to collapse
Got same issue. Notify me if there is any solutions...thx.

Thanks work like a charm!

Sorry for reviving this thread, but I managed to solve my problem with this solution. however after a while, because of some problems I booted into recovery, and after seeing the TWRP logo the phone goes black and I can't do anything. I believe I might have killed my phone, but does anyone have some idea?

coyotejodido said:
Sorry for reviving this thread, but I managed to solve my problem with this solution. however after a while, because of some problems I booted into recovery, and after seeing the TWRP logo the phone goes black and I can't do anything. I believe I might have killed my phone, but does anyone have some idea?
Click to expand...
Click to collapse
Plz check some of my older posts. I posted a stock recovery Link. Use that and you'll be able to boot just fine.
Sent from my ONEPLUS A3003 using Tapatalk

HermitDash said:
If your bootloader is unlocked and you can access the bootloader insteead of recovery just get fastboot working on your computer and you should be able to flash the TWRP listed above.
Click to expand...
Click to collapse
I have unlocked my bootloader. when i flashed twrp it showed a blank screen it is not tuning on after holding the power button for 20 min. please help