Related
1. Since the Galaxy S III became available as a Boost variant, there’s been an increasing amount of questions, issues, and requests for builds. I have collaborated with the powers that be, and it was determined that it might be a good idea to start a Boost only thread. This thread is dedicated to anything and everything Boost Galaxy S III related.
2. I will update and bump and sticky and edit and whatever else needs to be done the best that I can, but it is open and available to all. This is YOUR thread, just as much as it is mine. I encourage folks to ask questions, post relevant links, tutorials, helpful hints, and anything else they come across while tinkering with their new phone that may help others related to the Boost S3.
3. First and foremost, as always is the disclaimer. We are all responsible for our own actions. I am not responsible for what you do to your phone, so please do not flame me or anyone else in this thread if you do something that potentially fries your device.
4. If you post a link to something flashable, either through Odin, CWM, Heimdall, TWRP, etc, please test it on your own phone first or have someone test it before you do so. If it works, and will benefit someone, feel free to include it. I will most likely PM the dev and ask to put it in the OP.
5. And finally, please be courteous and respectful. We are all here to learn from one another, and do not need sarcasm, unkindness, flaming, or disrespect, of any kind. Thank you and enjoy.
Stock Unrooted OTA Odin Tar
This is the official, stock, right out of the box, Boost MD7. This will unroot your device, and take everything back to the way it was when you got it. Please thank the OP, Smith058, over at AF (link to OP at the bottom), since he was so gracious to let me post it here, and to let me use it to cook up something good for you folks More to come on that one! The only issue I’ve noticed on this build is there’s no boot up sound. But it flashed modem, stock recovery, put the device status back to “normal” and made the “custom” in Odin mode back to “official.” This should come in handy if you need to send it back for repair, or just want to start anew. The coming zip (once it’s uploaded) has working sound.
Stock MD7 Odin Tar Link https://mega.co.nz/#!ARkXGZCS!RITkIjvPnT51c6nyDdFvE2Z4oBNQt0PTcKnCGWuavdo
Link to Smith058’s OP(be sure to give him a shout out!)
http://androidforums.com/boost-mobile-galaxy-s3-all-things-root/753772-odin-backup-sph-l710_md7-stock.html
Stock OTA MG2 Tar:
http://www.androidfilehost.com/?fid=23212708291678209
Flashing Instructions:
1. Download and Install Odin to your PC
2. Download the ROM to your computer, and remember where you put it
3. Boot your phone into download(Odin) mode by pressing volume down, home button, and power button simultaneously
4. Once in Odin mode, connect your phone to your PC
5. Once the “COM” block turns blue, click the PDA button, and navigate to the ROM tar.
6. As a habit, I uncheck the F. Reset Time and Auto Reboot boxes as well
7. Click Start. When it’s done, pull the battery.
8. Reinsert battery, boot up, and profit
Links to Boost ROMs
Stock Rooted MD7 Flashable Zip -http://forum.xda-developers.com/showthread.php?t=2478888
Stock Unrooted MD7 Flashable Zip - http://forum.xda-developers.com/showthread.php?p=46367914#post46367914
Stock Rooted, Deodexed MG2 Zip - http://forum.xda-developers.com/showthread.php?p=47537971
One more, just to be on the safe side
jdsingle76 said:
The only issue I’ve noticed on this build is there’s no boot up sound. The coming zip (once it’s uploaded) has working sound.
Click to expand...
Click to collapse
My phone is running a rooted version of the stock MG2 ROM. While it has the Boost startup splash "4G" screen, I don't think there ever was a sound component.
Also - If I recall correctly, some custom ROMs labelled as compatible with the Sprint Galaxy S3 will cause us to LOSE 4G SERVICE, because they do not have the Boost-specific APN settings in them, and changing APN settings on Jellybean ROMs is (apparently) not possible as it was on Ice Cream Sandwich ROMs. So beware, and make sure that any ROMs that you want to flash will not kill your 4G!
SweetBearCub said:
My phone is running a rooted version of the stock MG2 ROM. While it has the Boost startup splash "4G" screen, I don't think there ever was a sound component.
Also - If I recall correctly, some custom ROMs labelled as compatible with the Sprint Galaxy S3 will cause us to LOSE 4G SERVICE, because they do not have the Boost-specific APN settings in them, and changing APN settings on Jellybean ROMs is (apparently) not possible as it was on Ice Cream Sandwich ROMs. So beware, and make sure that any ROMs that you want to flash will not kill your 4G!
Click to expand...
Click to collapse
I think it was an issue with the Tar, because when I built the flashable zips, they not only had the Boost animation, but the sound component as well. And I have seen around that some Sprint ROMs will cause issues with 4g. I know that it is possible to get into change the "guts" of your phone if you have your MSL by with JB Touchwiz ROMs by dialing ##3282# from your phone's dialer. However, for some reason, with the zip I just built, it's not cooperating. I'm going to swap out secphone.apk later today, from another stock build, and see if that fixes the issue. But thanks for the heads up. That's what this thread is all about.
I've been prompted for a system update... safe?
beneliezer said:
I've been prompted for a system update... safe?
Click to expand...
Click to collapse
If you flashed the rooted one, chances are it won't let you update, but give it a try. Additionally, if you have custom recovery, which you had to in order to flash the zip, it most likely won't let you update it either. It's an Android Software update, not a firmware. I would try it, and I'm sure it will fail, but at least you won't get prompted anymore for software updates But yes, it is safe to try.
jdsingle76 said:
If you flashed the rooted one, chances are it won't let you update, but give it a try. Additionally, if you have custom recovery, which you had to in order to flash the zip, it most likely won't let you update it either. It's an Android Software update, not a firmware. I would try it, and I'm sure it will fail, but at least you won't get prompted anymore for software updates But yes, it is safe to try.
Click to expand...
Click to collapse
jdsingle76 is correct. It won't hurt anything, it just won't work. If you accept the update, your phone will reboot into recovery, process for a few seconds, and fail with an error. However in my experience, that will not stop the software update prompts from re-occurring. If I recall, the best way to stop them was to use something like Titanium Backup and freeze something having to do with 'OTACERTS'. It's been a while, so my info may be out-of-date on that front.
can someone please reupload the stock SPH-L710 odin tar file else where before I brick my phone accidentally, its not letting me use recovery. The root method i used did not work correctly, now my phone is now working properly and i just want to get back to stock to try a different method for rooting, i need this odin file please!
nickdagreat said:
can someone please reupload the stock SPH-L710 odin tar file else where before I brick my phone accidentally, its not letting me use recovery. The root method i used did not work correctly, now my phone is now working properly and i just want to get back to stock to try a different method for rooting, i need this odin file please!
Click to expand...
Click to collapse
http://androidforums.com/boost-mob...backup-sph-l710_md7-stock-3.html#post6238089
Post #106
smith058 said:
http://androidforums.com/boost-mob...backup-sph-l710_md7-stock-3.html#post6238089
Post #106
Click to expand...
Click to collapse
Good to see ya bro. Thanks for throwing that up there. Just noticed the dropbox link was broken for too much traffic. I have the MG2 tar from Kies as well. This weekend if I get time I'll throw both of them in AFH and/or dev-host. Hope all's well, thanks for helping out!
J
Guys, i know this post is a little bit old, but i was wondering if I could flash this file with the Sprint Version (same one, SPH-L710) I know this will not harm my phone but I just want to make sure. is it safe?
erick1457 said:
Guys, i know this post is a little bit old, but i was wondering if I could flash this file with the Sprint Version (same one, SPH-L710) I know this will not harm my phone but I just want to make sure. is it safe?
Click to expand...
Click to collapse
What file from this op are you referring to? But to answer your question, yes, you can flash ant sprint file to the boost variant, and vice versa, you just might have to change apn, mmsc, stuff like that, to get mms to work.
Sent from my SPH-L710 using Tapatalk
Boost Stock 4.3
jdsingle76 said:
What file from this op are you referring to? But to answer your question, yes, you can flash ant sprint file to the boost variant, and vice versa, you just might have to change apn, mmsc, stuff like that, to get mms to work.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Thanks to all of u guys out there especially jdsingle76, Can anyone help with untouched Stock BoostMobile S3 4.3.tar ODIN ROM, i would be glad for any help in this regard, Meanwhile are we seeing Kitkat for BM S3? , Again is there a chance we can be KNOX free again in our lives?
alemosman said:
Thanks to all of u guys out there especially jdsingle76, Can anyone help with untouched Stock BoostMobile S3 4.3.tar ODIN ROM, i would be glad for any help in this regard, Meanwhile are we seeing Kitkat for BM S3? , Again is there a chance we can be KNOX free again in our lives?
Click to expand...
Click to collapse
I have not gotten my hands on a 4.3 Odin tar yet. If you do remember it'll have Knox, and I think Knox is here to stay. Ice heard rumors about Kit Kat for this phone but nothing's come out yet. Thanks for the support!
Sent from my SPH-L710 using Tapatalk
jdsingle76 said:
I have not gotten my hands on a 4.3 Odin tar yet. If you do remember it'll have Knox, and I think Knox is here to stay. Ice heard rumors about Kit Kat for this phone but nothing's come out yet. Thanks for the support!
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Thank you Jdsingle76, Boost Mobile are doing a hell of a job there keeping the 4.3 Odin tar under their sleeves.
Are your enjoying my build
Sent from my SPH-L710 using Tapatalk
knox scares me
knox bootloader scares me soo much that am still running stock unrooted, am afraid when i void my warrant i might not be able to upgrade to kitkat if it ever comes out
alemosman said:
knox bootloader scares me soo much that am still running stock unrooted, am afraid when i void my warrant i might not be able to upgrade to kitkat if it ever comes out
Click to expand...
Click to collapse
Don't fret. .. If kitkat comes out there will definitely be a custom rom made with it that you will be able to flash. With root you will have many more options than you ever will with stock.
I Got this phone in the mail off Ebay today. And within the first hour I updated it to 4.3 and rooted it. And now I'm getting another OTA update notification. I'm not new to rooting and stuff but I am new to Samsung. So I'm a little worried if I should do the update or not. I don't wanna get stuck in a bootloop or anything.
I'm rooted
I'm running 4.3
I have Clockwork flashed
Rom is stock
All I'd like to know is if I am safe to update? I heard you are and then I've heard you're not.
not sure but if you can unroot you can allways re root in 4.4
If no one else has done so yet, ive got a modded ota that should allow you to flash via cwm or twrp, and should preserve root.
Its uploading now.
DocHoliday77 said:
If no one else has done so yet, ive got a modded ota that should allow you to flash via cwm or twrp, and should preserve root.
Its uploading now.
Click to expand...
Click to collapse
Alright thanks! let me know when it's up. And are you from Huntsville Alabama too?
Ok, here is the modded OTA!
It should allow you to flash via TWRP or CWM recoveries, and it should also preserve root!
You will still need to be full stock for it to work as it still will go through its checks before flashing. It is not recommended to remove these checks because it could cause problems when patching files. Especially if the files being patched have been modded.
THIS IS UNTESTED! I do not have a working device at the moment, (dont have the I747 anyway), so I am unable to test on my own before releasing. I do not foresee any problems, but there just is no way to be positive until its been tried. If there is an issue, it should still just fail before the flash like it always has been supposed to do.
Please post back ASAP after trying this out so we know if it is working or not.
Modded_OTA_UCUEMJB-UCUFNE4.zip
Hope this proves helpful for some of you!
Doc
DocHoliday77 said:
Ok, here is the modded OTA!
It should allow you to flash via TWRP or CWM recoveries, and it should also preserve root!
You will still need to be full stock for it to work as it still will go through its checks before flashing. It is not recommended to remove these checks because it could cause problems when patching files. Especially if the files being patched have been modded.
THIS IS UNTESTED! I do not have a working device at the moment, (dont have the I747 anyway), so I am unable to test on my own before releasing. I do not foresee any problems, but there just is no way to be positive until its been tried. If there is an issue, it should still just fail before the flash like it always has been supposed to do.
Please post back ASAP after trying this out so we know if it is working or not.
Modded_OTA_UCUEMJB-UCUFNE4.zip
Hope this proves helpful for some of you!
Doc
Click to expand...
Click to collapse
I would test it but I just can't. I'm pretty sure it wouldn't break anything. But I haven't had this phone for 24 hours yet, I just bought it and it's the only one I got. I even paid my bill today too. And I'm looking for another job and you have to have a phone for that lol. Post it up on the forum and let someone who knows more than I do test it because I'm just gonna have to wuss out on this one. I appreciate it though!:good::good:
No sweat. I completely understand! I may go ahead and make a thread for it, but was hoping to verify it works first. Ill post it in the other ota thread for now.
And yes, I am close to Huntsville. Good luck on your job hunt!
Questions and Help issues belong in Q&A and Help section..thanks
Thread moved
FNSM
Hey guys, I am new to this forum here but before anyone flames me, I did read the faqs and tried to uninstall from there but it did not work out. Apparently I dont think you can get rid of CM11 since you cant install any stock firmware older than it? Before I installed CM11, I was on jellybean. I had tried to find the latest kitkat update for the s3 (att) and there is no file of it found online (tried sammobile). When I tried flashing an older firmware with ODIN, it just fails at "NAND!". Any help would be appreciated. I am COMPELETELY new at this so specific directions would be appreciated!
I really do love cyanogenmod but there are simply too many glitches and not enough guidance on how to fix em. I am, however, currently using it on my HP touchpad, if anyone remembers what it is . Maybe ill go back to using it in the future.
thanks!
Your rom (cm) has nothing to do with what firmware you can or cannot flash. Once you have updated to 4.3 firmware or newer, you can only flash the same or newer firmware in odin from now on. (Regardless of firmware you can still flash older roms btw)
Using terminal emulator, enter this to find your current firmware build:
getprop ro.bootloader
I suspect you are on a 4.3 build. So odin flash that same firmware. You can find it in these forums. After that you can get the ota to update fully to kk.
There are other methods of updating. Just check the General section. (enewman17 has a few threads that will help)
Note: anytime you go between touchwiz and non touchwiz roms, you will have to factory reset or it'll hang at boot.
DocHoliday77 said:
Your rom (cm) has nothing to do with what firmware you can or cannot flash. Once you have updated to 4.3 firmware or newer, you can only flash the same or newer firmware in odin from now on. (Regardless of firmware you can still flash older roms btw)
Using terminal emulator, enter this to find your current firmware build:
getprop ro.bootloader
I suspect you are on a 4.3 build. So odin flash that same firmware. You can find it in these forums. After that you can get the ota to update fully to kk.
There are other methods of updating. Just check the General section. (enewman17 has a few threads that will help)
Note: anytime you go between touchwiz and non touchwiz roms, you will have to factory reset or it'll hang at boot.
Click to expand...
Click to collapse
..
I am on "I747UCUEMJB"
and i am not sure what build i am on but according to my "build number"this is what it says: "cm_d2att-userbug 4.4.2 KOT49H"
The main issue is, I cannot find 4.3 update anywhere on the internet
The MJB is your current firmware/bootloader build/version.
The build number displayed in settings only represents the rom, which is often different, and doesnt really matter to much.
From this post/thread
http://forum.xda-developers.com/showthread.php?p=52341560
Direct link to MJB firmware
http://www.androidfilehost.com/?fid=23329332407590581
DocHoliday77 said:
The MJB is your current firmware/bootloader build/version.
The build number displayed in settings only represents the rom, which is often different, and doesnt really matter to much.
From this post/thread
http://forum.xda-developers.com/showthread.php?p=52341560
Direct link to MJB firmware
http://www.androidfilehost.com/?fid=23329332407590581
Click to expand...
Click to collapse
i have no idea what MJB means (i google'd it) and i just found out what my bootloader version is via download mode (its at the very bottom) and i have version 2.0?
ok downloading the giant file now. will report details. just follow instructions in the first link?
[sorry, like i said, im a noob so i really apologize for the lack of terms here]
MJB is just short for I747UCUEMJB. Sorry if I confused you. And the S/W revision being 2.0 is what Odin uses to know what firmware it is allowed to flash. In this case 2.0 tells odin it can flash the MJB firmware, or anything newer.
And yes, follow the instructions he posted and you should be fine.
Oh, and if you did not run the getprop command I posted before, please do so before flashing....just to be on the safe side. If it returns I747UCUEMJB, you are good to go. If it returns anything else, let me know before flashing.
DocHoliday77 said:
MJB is just short for I747UCUEMJB. Sorry if I confused you. And the S/W revision being 2.0 is what Odin uses to know what firmware it is allowed to flash. In this case 2.0 tells odin it can flash the MJB firmware, or anything newer.
And yes, follow the instructions he posted and you should be fine.
Oh, and if you did not run the getprop command I posted before, please do so before flashing....just to be on the safe side. If it returns I747UCUEMJB, you are good to go. If it returns anything else, let me know before flashing.
Click to expand...
Click to collapse
Cool! Got it. I think that was my main problem. I could only find 4.0 (or 4.1) and have been trying to use that on ODIN. Perhaps that was the main issue....
Oh already ran it and got "I747UCUEMJB", sorry if didnt say it properly.
Really appreciate the help! Ive at this for days and no solutions. Sometimes the hacking/custom firmware isnt for everybody
Ill update what happens. Download is taking forever.
EDIT: BTW, for the first link, which poster am I gonna have to follow? im assuming "garbage guy"?
I though you did run the command already, but just wanted to be certain is all. For some reason AT&T stopped releasing their firmware, which has been causing all kinds of problems for people.
Anyway, it sounds like you are good to go! Good luck!
Oh, and if the firmware you're downloading is a .zip or .7z file, make sure you extract it first. Odin only flashes .tar and .tar.md5 files.
DocHoliday77 said:
I though you did run the command already, but just wanted to be certain is all. For some reason AT&T stopped releasing their firmware, which has been causing all kinds of problems for people.
Anyway, it sounds like you are good to go! Good luck!
Oh, and if the firmware you're downloading is a .zip or .7z file, make sure you extract it first. Odin only flashes .tar and .tar.md5 files.
Click to expand...
Click to collapse
Thank you so much! It finally worked! I got the reset notification and I am now back on JB
Thank you! should I take any more steps to ensure I made a clean installation or am I good after flashing it?
david12795 said:
Thank you so much! It finally worked! I got the reset notification and I am now back on JB
Thank you! should I take any more steps to ensure I made a clean installation or am I good after flashing it?
Click to expand...
Click to collapse
Weird, I went straight to update phone and it said my phone is up to date? I thought the official 4.4 update came out for the S3?
david12795 said:
Thank you so much! It finally worked! I got the reset notification and I am now back on JB
Thank you! should I take any more steps to ensure I made a clean installation or am I good after flashing it?
Click to expand...
Click to collapse
Awesome!
really glad to hear that! The only thing I can think of thst you might want to do next is backing up your nv data. The following is a copy/past from a post I made a few min ago... root is required to fo this btw, just so you know.
(Since you are looking to update though, I recommend waiting till you have updated before rooting and running this backup)
It's a super simple procedure and will create an on device backup of your nv data. The backup will be stored on a couple of partitions we never touch, not even with firmware flashes. This essentially makes it a permanent backup. The cool thing about it is every time you reboot, the system checks for any corruption, and if detected, it will automatically restore from this backup. So if it were to ever happen, you probably wouldn't ever even notice it!
Install the Terminal Emulator from the play store. Open and enter this:
su
reboot nvbackup
Thats it! Device will reboot and create your backup. This should prevent you from ever suffering from a lost IMEI!
david12795 said:
Weird, I went straight to update phone and it said my phone is up to date? I thought the official 4.4 update came out for the S3?
Click to expand...
Click to collapse
That has been released, but OTA's are generally rolled out in stages over several weeks. Usually done by region. So it msy not have started in your area just yet.
Two alternatives you can try though, install kies on your computer and update through that. Or there are a couple if threads in the General section that provide the ota for download.
Enewman17 has a few threads helping folks to update so I recommend checking them out as well.
Ive heard that some people have gone to best buy and they were able to initiate the update there. I dont know much more about this though.
DocHoliday77 said:
Awesome!
really glad to hear that! The only thing I can think of thst you might want to do next is backing up your nv data. The following is a copy/past from a post I made a few min ago... root is required to fo this btw, just so you know.
(Since you are looking to update though, I recommend waiting till you have updated before rooting and running this backup)
It's a super simple procedure and will create an on device backup of your nv data. The backup will be stored on a couple of partitions we never touch, not even with firmware flashes. This essentially makes it a permanent backup. The cool thing about it is every time you reboot, the system checks for any corruption, and if detected, it will automatically restore from this backup. So if it were to ever happen, you probably wouldn't ever even notice it!
Install the Terminal Emulator from the play store. Open and enter this:
su
reboot nvbackup
Thats it! Device will reboot and create your backup. This should prevent you from ever suffering from a lost IMEI!
Click to expand...
Click to collapse
Thank you! I will look into this. I just figured for some reason...I would have some data left from cyanogenmod, if that makes sense. In other words, i want my phone to be as fresh as possible. I only ask this because when I had CM, i accidentally made a backup of it through rom manager (or clockwork) and I am not sure if its in my partition somewhere.
That has been released, but OTA's are generally rolled out in stages over several weeks. Usually done by region. So it msy not have started in your area just yet.
Two alternatives you can try though, install kies on your computer and update through that. Or there are a couple if threads in the General section that provide the ota for download.
Enewman17 has a few threads helping folks to update so I recommend checking them out as well.
Ive heard that some people have gone to best buy and they were able to initiate the update there. I dont know much more about this though.
Click to expand...
Click to collapse
TIL that OTA arent as fast. Ill download KIES and give it a try.
Just installed KIES and it said my phone has the latest firmware?
david12795 said:
Thank you! I will look into this. I just figured for some reason...I would have some data left from cyanogenmod, if that makes sense. In other words, i want my phone to be as fresh as possible. I only ask this because when I had CM, i accidentally made a backup of it through rom manager (or clockwork) and I am not sure if its in my partition somewhere.
TIL that OTA arent as fast. Ill download KIES and give it a try.
Click to expand...
Click to collapse
Factory resetting with stock recovery installed wipes all data except the external sdcard. I am so sorry I should've mentioned this before. I was thinking you had already done one at some point and didn't have anything left to worry about. Still, I should have asked and I do apologize for that. Hopefully if it was really important it was saved to the external sdcard....
david12795 said:
Just installed KIES and it said my phone has the latest firmware?
Click to expand...
Click to collapse
Ok, I wasn't sure about that. I personally never need or use kies so I didn't know if it was tied to the staged rollouts. It would appear that it is though.
Give me a few min and ill post links to the threads where you can download the ota or update via a different method.
---------- Post added at 03:56 AM ---------- Previous post was at 03:40 AM ----------
UCUEMJB to UCUFNE4 firmware update - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2808654.
How to update SGH-I747 yo UCUFNE4_4.4.2 - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2789917
[Download] AT&T Kitkat OTA file - thread by bkong
http://forum.xda-developers.com/showthread.php?t=2788012
I suggest trying the third one by bkong first. He posted a pure OTA file you can try to update with.
The first option is a recovery flashable firmware, but does not include the /system (ROM) portion. To fully update using this you'll flash the firmware per his instructions and then go to his development thread for the stock rom. It is here: http://forum.xda-developers.com/showthread.php?t=2788357
The second option is the OTA file, but it has been slightly modified to skip certain file checks. If the original OTA doesnt work, theres a good chance this will. (Since you are full stock now either one should flash without issue).
Hope those help! I recommend doing a bit of reading about each one (at least the OP and last few pages) and start with whichever you are most comfortable with.
Or, you could always use that most valuable tool, patience, and wait for the OTA to roll out for your area.
Good luck!
DocHoliday77 said:
Factory resetting with stock recovery installed wipes all data except the external sdcard. I am so sorry I should've mentioned this before. I was thinking you had already done one at some point and didn't have anything left to worry about. Still, I should have asked and I do apologize for that. Hopefully if it was really important it was saved to the external sdcard....
Ok, I wasn't sure about that. I personally never need or use kies so I didn't know if it was tied to the staged rollouts. It would appear that it is though.
Give me a few min and ill post links to the threads where you can download the ota or update via a different method.
---------- Post added at 03:56 AM ---------- Previous post was at 03:40 AM ----------
UCUEMJB to UCUFNE4 firmware update - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2808654.
How to update SGH-I747 yo UCUFNE4_4.4.2 - thread by enewman17
http://forum.xda-developers.com/showthread.php?t=2789917
[Download] AT&T Kitkat OTA file - thread by bkong
http://forum.xda-developers.com/showthread.php?t=2788012
I suggest trying the third one by bkong first. He posted a pure OTA file you can try to update with.
The first option is a recovery flashable firmware, but does not include the /system (ROM) portion. To fully update using this you'll flash the firmware per his instructions and then go to his development thread for the stock rom. It is here: http://forum.xda-developers.com/showthread.php?t=2788357
The second option is the OTA file, but it has been slightly modified to skip certain file checks. If the original OTA doesnt work, theres a good chance this will. (Since you are full stock now either one should flash without issue).
Hope those help! I recommend doing a bit of reading about each one (at least the OP and last few pages) and start with whichever you are most comfortable with.
Or, you could always use that most valuable tool, patience, and wait for the OTA to roll out for your area.
Good luck!
Click to expand...
Click to collapse
No no! Its fine, I wasnt planning using it or anything, I just wanted to get rid of it since I have no use for it, no need to apologize. , I was fully aware that I would lose all files, other than SD ext drive. I just wanted to make sure that all files are in the right place and none of the unnecessary files are taking up space (e.g. files from cyanogenmod)
As for the update, I talked to a samsung representative and they said one can go to Best Buy and get it updated there through a technician, so Ill try that later since I am close to it ATM. If it back fires, Ill try your suggestions.
I really do appreciate for the help , I have been completely lost for days but it turns out I was just using the wrong firmware. Thanks for pointing it out. Good karma is coming your way . Hopefully one day, I will be here again and trying out a new custom firmware.
Glad I could help!
If I remember right, someone who mentioned the best buy thing had said at the time that the first store they went to did not have the update yet. But I think they found another in their area did. So if they say its up to date and cant help, you might find another store close by can. (If there is one of course!)
Just fyi so you're not too surprised if that happens.
DocHoliday77 said:
Glad I could help!
If I remember right, someone who mentioned the best buy thing had said at the time that the first store they went to did not have the update yet. But I think they found another in their area did. So if they say its up to date and cant help, you might find another store close by can. (If there is one of course!)
Just fyi so you're not too surprised if that happens.
Click to expand...
Click to collapse
Ill hope for the best and prepare for the worst.
Of course, if the worst happens, I can just use one of your links you mentioned. :good::good:
Hey guys,
I'm kinda new to the HTC/Android world, found this community a damn good place to find support.. But now I've hit a road block.
Basically, I've been eager to root from day 1 of getting my first htc handset, I came across from jailbreak and loved the fact of customizability with Android.
So I had the Google play edition(I think, all geared towards Google) running Kit Kat 4.4.4. Love it, big Google user so this all tied together lovely.
Here is the Situation.
I found a video on youtube, cannot provide URL as I'm in work at the moment, but it was root guide from scratch. Fresh windows OS, seemingly a phone fresh out the box.. you get the idea.
I used the Hasoon2000 tool to root the device. Installed ADB etc on my pc, signed up as a a dev, got the Key for device, sent in and received my .bin file. I got up to actually rooting my device, well pleased and happy. Using TWRP via Hasoon2000.
But here is where **** hits the fan.
The device needed to update, It took me back to 4.4.2 but Im unsure on how to get back to most up to date OS and keep the root.
But when I reboot to install this, it goes into TWRP. no other way around this.
Queried this on another forum, decided to continue to be patient... but no replies, in the mean time I restored my apps and have a fiddle, see what the root function can do for myself.
I installed "Freedom 1.0.6" and a program called "Market Share"- Hate iAP, some games are ridiculously priced for the smallest of things, I just wanted to sandbox plague inc. ;(
Now the device is stuck in a boot loop, phone starts up, see the home screen for a bout 40 seconds/ one minute.. Some times I unlock the device and it goes back to flash screen then.. others I boot an app and its slides away once more.
This happened close to 15x before I left for work this morning and I imagine its just going to repeat this and run the battery - I tried to stop this loop by going into TWRP and possibly choosing to boot system this way may of stopped it.. but when I was on the boot screen with those options.. It said Tampered at top of screen and S-On- which has scared me quite a bit..
What the hell has happened!?
I'm desperate to know and don't want to have this damn thing bricked! Please help.. try explain like I'm 5, as said I'm new to a lot of this! >.<
first off, if the screen comes on, its not bricked.
esenfur said:
But here is where **** hits the fan.
The device needed to update, It took me back to 4.4.2 but Im unsure on how to get back to most up to date OS and keep the root.
But when I reboot to install this, it goes into TWRP. no other way around this.
Click to expand...
Click to collapse
Do you mean you accepted an official OTA? I think that is what you are saying. You should not be accepting OTAs on a phone that has been bootloader unlocked, custom recovery, etc. unless you know exactly what you are doing and what the result will be (which is clearly not the case).
Stock recovery is needed to install an OTA. That is why it keeps going to TWRP, then it doesn't find stock recovery and reboots, hence the loop you are stuck in. Try to find the OTA file and delete it.
redpoint73 said:
first off, if the screen comes on, its not bricked.
Do you mean you accepted an official OTA? I think that is what you are saying. You should not be accepting OTAs on a phone that has been bootloader unlocked, custom recovery, etc. unless you know exactly what you are doing and what the result will be (which is clearly not the case).
Stock recovery is needed to install an OTA. That is why it keeps going to TWRP, then it doesn't find stock recovery and reboots, hence the loop you are stuck in. Try to find the OTA file and delete it.
Click to expand...
Click to collapse
Thank you for fast response.
Official OTA - being that the phone its self said "Update the OS" - I just accepted this, hit download and began install as a reboot- didnt spot implications. As said, noob, followed a tut. If it highlighted DO NOT UPDATE or.. IF U WANT UPDATE NOW FOLLOW THIS- Great, but nothing of the sort?
Is the OTA file basically the .exe for the OS- so find it and delete it.. although I dont have enough time to navigate and establish where the file actually is located!
Or do you have any links to tutorials I could possibly follow?
Side note- when this loop started I deleted
esenfur said:
Or do you have any links to tutorials I could possibly follow?
Click to expand...
Click to collapse
This is really your main issue. By following a YouTube video and using a Toolkit, you've failed to actually learn anything or gain any real understanding or knowledge. Do yourself a favor and ditch the tutorials and videos (and toolkit for that matter) and do it the old fashioned way . . . by reading. Videos and step-by-step guides do you no good when things go south (as you've now discovered). And with the prior proper knowledge (usually not gained by following tutorials) this whole mess probably would have never happened in the first place.
A cardinal rule of Android phone modding: DO NOT accept/download/install OTAs (official OS updates) on a modded device unless you know what you are doing, and what the result will be. If in any doubt, simply DO NOT do it.
esenfur said:
Is the OTA file basically the .exe for the OS- so find it and delete it.. although I dont have enough time to navigate and establish where the file actually is located!
Click to expand...
Click to collapse
.exe file is Windows specific. You are looking for a zip file, and it typically starts with "OTA". Don't remember where its saved to, so you will have to search for it. If you can't keep the phone running long enough to do so, mount the memory on your computer and search that way.
Deleting the OTA file worked for me on a past device, although one M8 user in the same position said deleting the file didn't get him out of the loop. Flashing your ROM again, or wiping the internal memory (backup any important personal data first) might be options for you.
redpoint73 said:
you've failed to actually learn anything or gain any real understanding or knowledge.
Click to expand...
Click to collapse
Ive seen quite a fair few ratings for Hasoon2000 and decided to go with it..
redpoint73 said:
Videos and step-by-step guides do you no good when things go south (as you've now discovered).
Click to expand...
Click to collapse
agreed.. theres FAR much more I need to learn.. its scary haha.
redpoint73 said:
DO NOT accept/download/install OTAs (official OS updates)
Click to expand...
Click to collapse
taken on board. I know with my jailbreaks in past it has been a pain, assumed Android would be alot more stable to over write- due to functionality of OS and unlocked features.
I was being generic when I said .exe- basically the installer..
I returned from work to see phone stopped looping.. i could stop the install and deleted the file ASAP.. but now what.. Phone is still bugging me to update, lost the root(got a checker).. so whats the correct procedure!?
I am confused to what you are trying to accomplish at this point, is it to install a OTA, or a recovery? What exactly is going down here?
Me personally to take an OTA is to relock bootloader, install stock recovery, and make sure CID matches. I am S-Off so bootloader means very little, but you can unlock and relock at will when you are S-Off. You will not lose S-Off accepting an OTA.
Try to re-flash the ROM, with stok ROM, using TWRP and clean install. It should work.
hack14u said:
I am confused to what you are trying to accomplish at this point, is it to install a OTA, or a recovery? What exactly is going down here?
Me personally to take an OTA is to relock bootloader, install stock recovery, and make sure CID matches. I am S-Off so bootloader means very little, but you can unlock and relock at will when you are S-Off. You will not lose S-Off accepting an OTA.
Click to expand...
Click to collapse
I am trying to update the phone, root and then some..
What file am I looking for and how do I flash a ROM on a M8
esenfur said:
I am trying to update the phone, root and then some..
What file am I looking for and how do I flash a ROM on a M8
Click to expand...
Click to collapse
First of all once the bootloader is unlocked you don't have to relock it to get OTA.
As I undersand you have done the following:
1) Unlock using HTCDev-Method
2) flashed a custom revocery (TWRP in your case)
3) flashed a supersu too!?
To install the OTA means loosing root acces. Thus you have to re-root it after the OTA is done. The other problem ist that STOCK OTAs don't work with a custom recovery. Meaning you would have to flash a stock recovery first, install the OTA second (as long as you didn't change anything an just root), and re-root third.
Let's have a look which stock recovery you would need:
1) reboot to bootloader
2) connect the phone to you PC and open cmd in you adb/fastboot folder
3) enter "fastboot getvar all"
4) paste this information here (but DELETE the IMEI and SERIAL NUMBER before posting!!)
As soon as we know which stock recovery you need we will go on.
esenfur said:
Ive seen quite a fair few ratings for Hasoon2000 and decided to go with it..
Click to expand...
Click to collapse
I'm not saying there is anything "wrong" with the toolkit, per se. For the most part, it does what its intended to do.
But it also shortcuts the learning process, and facilitates folks rooting the phone without gaining the proper knowledge. This is a dangerous thing.
This is just my opinion. But I strongly believe it. If you can't accomplish these things without a toolkit, you shouldn't be rooting your phone in the first place.
Others use the toolkits, and love them. They are more than entitled to have their own opinion. But when things go south, the toolkits aren't going to help; and those folks don't have the proper knowledge and they come running here. So you tell me what is the "best" way to root the phone?
esenfur said:
I was being generic when I said .exe- basically the installer..
Click to expand...
Click to collapse
I already figured this was probably the case. But I found it better to provide the exact information on what file to delete; rather than leaving it open to the possibility of you and/or others being misinformed.
esenfur said:
Phone is still bugging me to update, lost the root(got a checker).. so whats the correct procedure!?
Click to expand...
Click to collapse
Sounds like you still have TWRP installed, so just flash SU or SuperSU to gain root.
After that, you can use Titanium Backup or similar app to find the update process and freeze it, to stop the update notifications.
Don't remember the exact process (this is where searching and reading comes in for you) but its something like "drm..." or "updater".
I have this situation before,what i do is find the right stock recovery and flash..after ota done flash back custom recovery..?
esenfur said:
I am trying to update the phone, root and then some..
What file am I looking for and how do I flash a ROM on a M8
Click to expand...
Click to collapse
At this point after seeing this, I would suggest you take some time and start reading. All of your answers are here in the forums. Knowledge is power and within the pages of this site you will find everything you need.
To take the OTA find a stock recovery, to flash ROM's find the one you like and flash via your favorite recovery.
DELETE
Reflash twrp then wipe the cache and data partition then reboot.
.......
.......
Did you try factory resetting from within settings on the tablet?
If you did that was your first mistake.
Twrp is now stuck in a loop trying to execute a script created for the stock recovery when you tried to reset from within settings.
You cannot factory reset from settings when you have a custom recovery installed. You have to do that from recovery itself.
No worries it's easily fixable, simply head over to sammobile or samsung-updates.com and download your firmware. Then boot into download mode and flash with odin.
After that you will be back to stock.
What was the point of that!?
In future anyone with a post count of less than 3 won't get advice from me.
You're going on my block list!
Overreaction much?
This is the OP by the way. I did that to have this thread deleted as I have solved the issue on my own. I eventually downloaded stock firmware and flashed. And yes, I did go to settings and tried to factory reset.
I figured I would edit posts and put "delete" for mods to delete the thread since it was solved and I no longer needed any help. And I'm on your block list for that? Really?
I do have a question if you even care to answer... Is there any way to root the device without TWRP? I don't want a custom recovery. Just the root. All I want is to be able to remove bloatware and able to use the "factory reset" from settings if wanted.
Kryar112 said:
Overreaction much?
This is the OP by the way. I did that to have this thread deleted as I have solved the issue on my own. I eventually downloaded stock firmware and flashed. And yes, I did go to settings and tried to factory reset.
I figured I would edit posts and put "delete" for mods to delete the thread since it was solved and I no longer needed any help. And I'm on your block list for that? Really?
I do have a question if you even care to answer... Is there any way to root the device without TWRP? I don't want a custom recovery. Just the root. All I want is to be able to remove bloatware and able to use the "factory reset" from settings if wanted.
Click to expand...
Click to collapse
No its not an overreaction.
If everybody deleted their posts after getting the answer then nobody would benefit and those that help solve the problem would be wasting their time.
Its highly disrespectful to the forum and other members who try to help.
You have a very low post count and that is not the way to conduct yourself if you are a new member.
I suggest you have a peruse of the forum rules to understand what I'm talking about.
You have already broken 2 of them in the first few posts you've made.
I can't help with your question as you have left no info whatsoever as to what model you actually own.
Ok, I apologize. I didn't think it would be a waste of time if you had actually helped the OP, which you did.
By the way it's the OP, and for some reason I could not log into my other account. So I had to make another.
Anyway, what I want to do is root my tablet, but with no custom recovery. I just want to be able to remove a lot of bloatware and if I ever feel the need, reset the tablet like normal from settings menu. And also able to do software updates, OTA. If I can. Really all I want to do with root is just remove useless apps I will never use. Free up some space/save battery and such. Not much else.
So I own a Samsung Galaxy Tab S 10.5, model SM-T800, running Lollipop version 5.0.2. I rooted my tablet using a CF-autoroot + TWRP before. But is there any root file that is just the root that will work for my model/android version I am running? Thanks for your help thus far.
OK that's better, but just a word of warning, you've created 3 accounts. You can get banned for this. If you have problems with your accounts contact a moderator.
Anyway go to this link for just root.
With root you will lose ota. However it's no big deal as all updates are available at sammobile.
https://autoroot.chainfire.eu/
Thanks for the reply... I know, I didn't mean to make another account. Sorry about that. If a admin can, they can delete the first two accounts since i no longer have access to them, and will be using this one as my main one.
Anyway I followed that link and I see the Odin flashable root for my device. Will it work for Android lollipop 5.0.2? I notice it says it's for android version 4.4.2.
When I first tried rooting, I found a root file and it didn't work. I had SU installed, but when I opened it it would ask to update binaries and then fail.
Warit1321 said:
Thanks for the reply... I know, I didn't mean to make another account. Sorry about that. If a admin can, they can delete the first two accounts since i no longer have access to them, and will be using this one as my main one.
Anyway I followed that link and I see the Odin flashable root for my device. Will it work for Android lollipop 5.0.2? I notice it says it's for android version 4.4.2.
When I first tried rooting, I found a root file and it didn't work. I had SU installed, but when I opened it it would ask to update binaries and then fail.
Click to expand...
Click to collapse
It will work fine.
Yep, thank you it worked.
Another question, is there an easy way to unroot, then do software updates, then re-root? Or is that too much of a pain? I dunno if you can turn root off using SuperSU, or if you need to install firmware to get rid of the root.
Warit1321 said:
Yep, thank you it worked.
Another question, is there an easy way to unroot, then do software updates, then re-root? Or is that too much of a pain? I dunno if you can turn root off using SuperSU, or if you need to install firmware to get rid of the root.
Click to expand...
Click to collapse
Well if you find your firmware for your device on SamMobile, flash with FLASHFIRE keeping root.
You may find you keep root and be able to ota , but you may have to factory reset first.
It worked for another member.
Hmm. If I did a factory reset, would all the bloatware apps I removed return? Or will they be gone for good?
Warit1321 said:
Hmm. If I did a factory reset, would all the bloatware apps I removed return? Or will they be gone for good?
Click to expand...
Click to collapse
They will when you install the stock rom.
Ok thank you for your help. Much appreciated.