All of a sudden I'm not able to select an existing ZW when using Popup widget.
When selecting Zooper as the widget from within Popup Widget, one can only select the default 18 templates / sizes and not an existing created zooper widget.
I would appreciate some assistance please from someone who uses Popup Widget to place Zooper Widgets on screen.
This has worked before but not at the moment.
Thanks for any help in this regard!
niteowl360 said:
All of a sudden I'm not able to select an existing ZW when using Popup widget.
When selecting Zooper as the widget from within Popup Widget, one can only select the default 18 templates / sizes and not an existing created zooper widget.
I would appreciate some assistance please from someone who uses Popup Widget to place Zooper Widgets on screen.
This has worked before but not at the moment.
Thanks for any help in this regard!
Click to expand...
Click to collapse
Does it work if you create the Zooper widget directly on your homescreen/any other way than Popup widget? Just asking because from your initial description it kinda sounds like you have the free and not the pro version of Zooper installed.
kwerdenker said:
Does it work if you create the Zooper widget directly on your homescreen/any other way than Popup widget? Just asking because from your initial description it kinda sounds like you have the free and not the pro version of Zooper installed.
Click to expand...
Click to collapse
Thank you for prompt reply.
Yes it works well when I use from within Zooper.
The issue seems to be that from within Popup Widget, there is no way to select the actual zooper widget but only the default templates.
So the 18 templates can be chosen, but not the already existing custom zooper widget that one has already created!!!
Yes, I am using Pro version.
Thanks kwerdenker
kwerdenker said:
Does it work if you create the Zooper widget directly on your homescreen/any other way than Popup widget? Just asking because from your initial description it kinda sounds like you have the free and not the pro version of Zooper installed.
Click to expand...
Click to collapse
Actually, I should have stated that the way popup widgets work is to select a 'shortcut'.
So basically the process is to point the hotspot to Popup Widget and select one of the widgets prev setup in Popup Widget.
Problem is as per my original post, can't seem to create a Popup Widget using an already created Zooper Widget.
But this has worked previously!
Thanks
Ps I don't seem to be able to select a Zooper widget as the hotspot link from within Zooper either.
I can though select a Popup Widget within popup widget..
Apologies if this is getting confusing..
niteowl360 said:
Thank you for prompt reply.
Yes it works well when I use from within Zooper.
The issue seems to be that from within Popup Widget, there is no way to select the actual zooper widget but only the default templates.
So the 18 templates can be chosen, but not the already existing custom zooper widget that one has already created!!!
Yes, I am using Pro version.
Thanks kwerdenker
Click to expand...
Click to collapse
niteowl360 said:
Actually, I should have stated that the way popup widgets work is to select a 'shortcut'.
So basically the process is to point the hotspot to Popup Widget and select one of the widgets prev setup in Popup Widget.
Problem is as per my original post, can't seem to create a Popup Widget using an already created Zooper Widget.
But this has worked previously!
Thanks
Ps I don't seem to be able to select a Zooper widget as the hotspot link from within Zooper either.
I can though select a Popup Widget within popup widget..
Apologies if this is getting confusing..
Click to expand...
Click to collapse
I tried to recreate the issue but it works for me. Could you please check your steps against mine for any differences?
Create new Popup widget either via the app or directly via a new shortcut on the homescreen/Zooper's OnTap action.
Select a Zooper widget as the Popup widget content.
Configure the settings for the Popup widget.
Exit the popup configuration.
Open the newly created Popup widget via shortcut (again either from homescreen or via Zooper)
Tap the "blank" Zooper widget and load the template.
Exit the Zooper configuration.
The Popup widget should now be completely configured and show the Zooper template when called via the shortcut.
kwerdenker said:
I tried to recreate the issue but it works for me. Could you please check your steps against mine for any differences?
Create new Popup widget either via the app or directly via a new shortcut on the homescreen/Zooper's OnTap action.
Select a Zooper widget as the Popup widget content.
Configure the settings for the Popup widget.
Exit the popup configuration.
Open the newly created Popup widget via shortcut (again either from homescreen or via Zooper)
Tap the "blank" Zooper widget and load the template.
Exit the Zooper configuration.
The Popup widget should now be completely configured and show the Zooper template when called via the shortcut.
Click to expand...
Click to collapse
Thank you very much kwerdenker for your detailed reply.
Am going through your steps shortly and will reply soon.
kwerdenker said:
I tried to recreate the issue but it works for me. Could you please check your steps against mine for any differences?
Create new Popup widget either via the app or directly via a new shortcut on the homescreen/Zooper's OnTap action.
Select a Zooper widget as the Popup widget content.
Configure the settings for the Popup widget.
Exit the popup configuration.
Open the newly created Popup widget via shortcut (again either from homescreen or via Zooper)
Tap the "blank" Zooper widget and load the template.
Exit the Zooper configuration.
The Popup widget should now be completely configured and show the Zooper template when called via the shortcut.
Click to expand...
Click to collapse
Can you explain step 5 and 6 in greater detail please.
I pretty much do all the steps before that..
All other widgets from other apps work as expected....
These are my steps
1. Create a Zooper widget and save.
2. Select Create a new widget in Popup Widget.
3. Select Zooper.
4. Choose any of the 18 templates
5. This places a blank Zooper widget.
And this seems to be the issue.
I should be able to select a previously created Zooper widget that I have created in Step 1. Above.
Thanks for your time on this.
It is appreciated.
niteowl360 said:
Can you explain step 5 and 6 in greater detail please.
I pretty much do all the steps before that..
All other widgets from other apps work as expected....
These are my steps
1. Create a Zooper widget and save.
2. Select Create a new widget in Popup Widget.
3. Select Zooper.
4. Choose any of the 18 templates
5. This places a blank Zooper widget.
And this seems to be the issue.
I should be able to select a previously created Zooper widget that I have created in Step 1. Above.
Thanks for your time on this.
It is appreciated.
Click to expand...
Click to collapse
Ah ok, I think I understand the problem now: your expectation of the process doesn't match with the one Zooper implements
When you create a Zooper widget, you get the choice of multiple widgets. The only difference here is the size of the widget. (You used the word template here but when you talk about Zooper, template means the .zw file you can load via the SD card option. This probably had me confused a bit at the beginning.) To get to the screen where you can load the template, you first have to create a Zooper widget of any size. This will result in a widget with the text "resize or tap to start" on it. When you tap it, you'll get to the template screen.
This "tap to configure" part is problematic in combination with Popup because in the configuration screen, you can't actually tap the widget. When you do that, you get the resize option from Popup widget. So what you have to do is create the widget, configure it in Popup as far as you can. Then you exit Popup and call the Popup shortcut you just configured, so it opens the blank Zooper and you can actually tap on it to load the template.
I hope this clarifies the steps necessary to make Zooper templates work with Popup widget.
kwerdenker said:
Ah ok, I think I understand the problem now: your expectation of the process doesn't match with the one Zooper implements
When you create a Zooper widget, you get the choice of multiple widgets. The only difference here is the size of the widget. (You used the word template here but when you talk about Zooper, template means the .zw file you can load via the SD card option. This probably had me confused a bit at the beginning.) To get to the screen where you can load the template, you first have to create a Zooper widget of any size. This will result in a widget with the text "resize or tap to start" on it. When you tap it, you'll get to the template screen.
This "tap to configure" part is problematic in combination with Popup because in the configuration screen, you can't actually tap the widget. When you do that, you get the resize option from Popup widget. So what you have to do is create the widget, configure it in Popup as far as you can. Then you exit Popup and call the Popup shortcut you just configured, so it opens the blank Zooper and you can actually tap on it to load the template.
I hope this clarifies the steps necessary to make Zooper templates work with Popup widget.
Click to expand...
Click to collapse
That's exactly the issue.
I didn't express it well enough, but your understanding now is perfect.
So what you have to do, can you explain each step in the relevant App please, Zooper or Popup.
Still unsure of the process.
Apologies for being difficult, but this is difficult to comprehend.
I have though, once before, been able to see the Zooper widget load successfully into the Popup Screen.
This is probably driving you insane too, but once solved I'll document everything and post it here.
Thanks
niteowl360 said:
That's exactly the issue.
I didn't express it well enough, but your understanding now is perfect.
So what you have to do, can you explain each step in the relevant App please, Zooper or Popup.
Still unsure of the process.
Apologies for being difficult, but this is difficult to comprehend.
I have though, once before, been able to see the Zooper widget load successfully into the Popup Screen.
This is probably driving you insane too, but once solved I'll document everything and post it here.
Thanks
Click to expand...
Click to collapse
Try it with the following steps and see if you can make it work.
Create a Zooper widget, configure it the way you like, save it as a template
Open Popup widget and create a new widget
From the list, choose a Zooper widget with the appropriate size for the template you just saved
Configure the settings for the Popup widget as would normally
Exit the Popup widget configuration via the back key to save your Popup widget
Exit the Popup widget app.
Either create a shortcut to the Popup widget you just made or use the appropriate OnTap action from another Zooper widget
Open the Popup widget via the shortcut/Zooper OnTap. It will display the "blank" Zooper widget with the "resize or tap to start" message. Tap on this Zooper widget.
You should be in the "Open template" screen. Select "SD card", search for the template you saved in Step 1 and tap on it.
Your template should now be loaded in the Zooper widget you called via Popup widget.
Exit the Zooper configuration
Your template should now be loaded in the Zooper Popup widget.
kwerdenker said:
Try it with the following steps and see if you can make it work.
Create a Zooper widget, configure it the way you like, save it as a template
Open Popup widget and create a new widget
From the list, choose a Zooper widget with the appropriate size for the template you just saved
Configure the settings for the Popup widget as would normally
Exit the Popup widget configuration via the back key to save your Popup widget
Exit the Popup widget app.
Either create a shortcut to the Popup widget you just made or use the appropriate OnTap action from another Zooper widget
Open the Popup widget via the shortcut/Zooper OnTap. It will display the "blank" Zooper widget with the "resize or tap to start" message. Tap on this Zooper widget.
You should be in the "Open template" screen. Select "SD card", search for the template you saved in Step 1 and tap on it.
Your template should now be loaded in the Zooper widget you called via Popup widget.
Exit the Zooper configuration
Your template should now be loaded in the Zooper Popup widget.
Click to expand...
Click to collapse
Thank you very much kwerdenker.
Your instructions work perfectly.
I'm extremely grateful to you.
I obviously managed to do this once before, but by fluke.
At least now I understand the process thanks to your patience.
I'm using Uccw hotspot to call the popup widget, but will probably use Zooper at some point too.
Thank you again for your patience, I know this can be extremely frustrating, so I'm particularly appreciative.
Have a great remainder of the day.
Sorry I took so much of your time.
One last thing (promise), when creating a Zooper template, and resizing the template, how do you tell what size in pixels the resized template is?
Can't seem to see any setting that tells you the new size of the resized widget.
Thank you again.
Cheers
niteowl360 said:
Thank you very much kwerdenker.
Your instructions work perfectly.
I'm extremely grateful to you.
I obviously managed to do this once before, but by fluke.
At least now I understand the process thanks to your patience.
I'm using Uccw hotspot to call the popup widget, but will probably use Zooper at some point too.
Thank you again for your patience, I know this can be extremely frustrating, so I'm particularly appreciative.
Have a great remainder of the day.
Sorry I took so much of your time.
One last thing (promise), when creating a Zooper template, and resizing the template, how do you tell what size in pixels the resized template is?
Can't seem to see any setting that tells you the new size of the resized widget.
Thank you again.
Cheers
Click to expand...
Click to collapse
No problem. This is what these forums are meant for and I gladly support everyone who is willing to expand their horizon and has the will to work for it.
As to your question: you can't find one because there is none. Zooper doesn't really work with pixels but has an internal scaling engine that should make sure that widgets look the same on different screens. This doesn't always work as intended but that's another story.
I guess you want to know which size you need to set your Popup widget to, so it has the same as the original Zooper widget you saved as a template? My way for that is to just determine it by hand: get the size of your device's screen in pixel (1280 height and 720 width for your one x for example) and divide that by the number of rows/columns you have set up in your launcher. Then you can just multiply that by how many rows/columns your Zooper widget used on the homescreen and get the size you need or at least a good estimate.
kwerdenker said:
No problem. This is what these forums are meant for and I gladly support everyone who is willing to expand their horizon and has the will to work for it.
As to your question: you can't find one because there is none. Zooper doesn't really work with pixels but has an internal scaling engine that should make sure that widgets look the same on different screens. This doesn't always work as intended but that's another story.
I guess you want to know which size you need to set your Popup widget to, so it has the same as the original Zooper widget you saved as a template? My way for that is to just determine it by hand: get the size of your device's screen in pixel (1280 height and 720 width for your one x for example) and divide that by the number of rows/columns you have set up in your launcher. Then you can just multiply that by how many rows/columns your Zooper widget used on the homescreen and get the size you need or at least a good estimate.
Click to expand...
Click to collapse
Yes, that was exactly the reason for the question, lol.
Will try your method.
Thanks again.
When I post my results eventually on our other thread, will be sure to credit you....
looks like popup widget cant call a zooper from within themer. If a zooper included in popup widget is selected, you just get a blank "loading zooper..." message.
Any solution to this?
Sometimes this occurs when memory low.
Try reboot and see what happens.
Worth a shot.
Sent from my LG-D855 using XDA Free mobile app
aadkitta said:
looks like popup widget cant call a zooper from within themer. If a zooper included in popup widget is selected, you just get a blank "loading zooper..." message.
Any solution to this?
Click to expand...
Click to collapse
I have this trouble too. I can create a usually zooper widget in Popup 2, but I can't create a Themer zooper widget in Popup 2. I just want to create a shortcut to Themer category in widget, but i can't do that in usually zooper, there are no one Themer shoshortcuts. I can choose it in Themer zooper, but i can't create this widget
niteowl360 said:
Sometimes this occurs when memory low.
Try reboot and see what happens.
Worth a shot.
Click to expand...
Click to collapse
Nexus 4, 2 GB RAM
Rylezzz said:
I have this trouble too. I can create a usually zooper widget in Popup 2, but I can't create a Themer zooper widget in Popup 2. I just want to create a shortcut to Themer category in widget, but i can't do that in usually zooper, there are no one Themer shoshortcuts. I can choose it in Themer zooper, but i can't create this widget
Nexus 4, 2 GB RAM
Click to expand...
Click to collapse
Themer Zooper is only available in the Themer app itself, you can't use it outside of it.
I was wondering if anyone has discovered or knows of an app that will allow a document (word or pdf) to display as a widget or shortcut from the homescreen. Kinda like a mini binder. I have a bunch of schedules for work that I would like to display as a widget or something instead of having to open a viewer, search for the file, open and then close again.
I noticed two threads from 2012 with no answers; I'm hoping they were just forgotten about in the shuffle.
aspromalee said:
I was wondering if anyone has discovered or knows of an app that will allow a document (word or pdf) to display as a widget or shortcut from the homescreen. Kinda like a mini binder. I have a bunch of schedules for work that I would like to display as a widget or something instead of having to open a viewer, search for the file, open and then close again.
I noticed two threads from 2012 with no answers; I'm hoping they were just forgotten about in the shuffle.
Click to expand...
Click to collapse
I just tried something on my 10.1 Tab Pro. In the "My Files" app, press down on a file until a marked checkbox appears. Then select the 3 dots menu on the top right. There is an option to "Add shortcut to home."
Unfortunately you can't select more than one file at a time though, you have to create the shortcut, then go back in and uncheck that one, and check another one, etc.
Second Screen Custom App Icons & Widget Triggering through Tasker/Zooper/Popup Widget
Hi Guys
So I know this isn't earth shattering, but given we are all feeling a bit underwhelmed with the second screen theming options I thought I'd share. I was able to get Second Screen to recognize a custom APK installed through Tasker using Tasker App Factory. I used a combination of Tasker, Popup Widget, Zooper Widget, and Tasker App Factory for this. I'm one of those guys that bought Tasker pro a long time ago, made some basic stuff, and then gave up because easier options came along... kind of the same with Zooper Widget, but I think I might actually starting using it more (even though I believe ZW support is finished) because I barely use the second screens static app options right now, it's just easier to pop onto the homescreen and open whatever I need. I think taking this route will give you access to stuff you might not want on your main screen easily (for me, that's something like the weather channel app), and doing it in any app you're already in. Essentially you just hit the app icon and your widget pops up with the information you want it to show, my widget is interactive so from there I can click certain things on the widget and open them.
I just tried recording my screen to share but it didn't record the second screen, so I'll need to charge my other phone before I can show you what I'm talking about. I'll hopefully get some pictures or a video up shortly.
By the way, this works with Nova Launcher also... I've seen some other threads where you have to use LG Launcher to change your icon.
https://youtu.be/4_PtV7tvYrc
*credit to Jack Burnett in Zooper Widget G+ forum for creating the initial ZW.
EDIT
You will need the Zooper Widget Template that was created by Jack Burnett, I got this off of Zooper Widget Google + Community because it was easier than creating my own. I did however, edit a lot of the components to make it more in line with what I was looking for. You can do that in Zooper Widget.
This is a static widget that stays on the home screen, but allows you to interact with various shown components.
Jack Burnett original post with widget - https://plus.google.com/+JackMcDonaldBurnett/posts/hJjejJEc1mE
Jack Burnett Template Download Location –
http://www.combathaiku.com/zooper/
In short, you can use this widget standalone and it will not have the Popup Functionality and will always be on the home screen. Clearly this does not help if I am trying to get it on the Second Screen.
Create your Zooper Widget or Import the Template from above.
Create a new Pop Up Widget, import the previously created Zooper Widget into your Pop Up Widget and Save it.
Open Tasker, New Task, + to Add Action, Plugin, Hit Pop Widget Action Plug In… When it opens hit the pencil and select your Pop Up Widget that contains your Zooper Widget. In the bottom right of the Task Edit Screen there will be an icon select button, you can choose your custom icon at that time.
When you are done and on the Tasks list page of Tasker you can long press your Tasker Task that contains your Pop Up Widget and Custom App Icon, you’ll hit the 3 button menu at the top right and select Export. Export it As App. ( You will need Tasker App Factory for this).
When you do that hit the Android icon in the bottom right and it will ask if you want to install the Application just like it does when you download from anywhere else.
You’ll hit install, it should install, hit Done.
Go to Settings, Second Screen, Show When Main Screen is On, App Short Cuts, Scroll down to your APK (make sure you named it in Tasker) and select.
It will add to your second screen and allow you to Use your Custom Icon to interact with your pop up widget options.
What is that widget?
TheRealKingSen said:
What is that widget?
Click to expand...
Click to collapse
Here you go. @TheRealKingSen. It's actually pretty convenient
https://plus.google.com/+JackMcDonaldBurnett/posts/hJjejJEc1mE
I dont understand the problem, we can change the icons on the main screen and move the app to the second screen
melorib said:
I dont understand the problem, we can change the icons on the main screen and move the app to the second screen
Click to expand...
Click to collapse
Hi - I'm not understanding your statement. There isn't really a problem. I'm not just changing the icons I am triggering a widget from the second screen that is actionable... We're adding our own Tasker APK to the second screen, which is clickable, and you can interact with the widget. Instead of keeping the widget on your homescreen taking up space, you can just use it whenever you want from the second screen without going to the home screen.. Like I said not earth shattering, but at the time the only changes I had seen regarding customizing second screen were changing icons, but people were saying you couldn't do that unless you used LG stock launcher..
I didnt realize it was about widgets, on the other hand, if you cannot see what is saying it doesnt make much sense, you might as well just have the app shortcut...
His option seems more about having a "peak" option so you can stay in-app.
Maybe a step-by-step guide would be great for us to actually try it out, or even placing other widgets onto it as well? Like Whatsapp, Facebook and stuff like that.
Hi Guys - that's exactly why I was putting it out there. I think the functionality is endless if you are good at creating zooper and popup widgets. I clearly am novice at zooper, popup, and tasker so this was my first go at it. However, I do believe it would allow you to create really whatever you want... I was trying to get a Social Widget created, so I'd hit the one icon and my facebook, instagram, tumblr, etc... would all pull up in one actionable widget window.... but I couldn't get the Popup Widget and Zooper Widget to play nicely in Tasker.
I can put together a guide on how it was done, but to answer the question above, my recording quality was **** but I can clearly see everything on the widget and it's large enough to select individual portions of the widget to open them... ie the wireless dbm monitor if I hit that it takes me to wireless settings, in the middle there's a small calendar square (not clear in the video), if I hit that I go to calendar. And I can do it in app due to second screen or if I am on snapchat and my videos are taking forever to load, instead of pulling down notification panel and long press wifi, I can just go to this popup widget and it shows my dbm and the network I'm connected to immediately without leaving snapchat.
I'll edit the original post so that it's more concise as to what exactly is going on. You can use a shortcut but what this method allows you to do is to create "short cut icons" for whatever you want, even if it's not provided as a typical shortcut, through your zooper widget and tasker.
I'll update what I can to make it more clear though. thanks for your feedback. Again I think It's more of a hey you can do this, someone who has awesome zooper/tasker functionality, roll with it type of thing.
melorib said:
I didnt realize it was about widgets, on the other hand, if you cannot see what is saying it doesnt make much sense, you might as well just have the app shortcut...
Click to expand...
Click to collapse
If I did that you'd be limited to only the number of iapp spaces/shortcuts allowed on the second screen. In this instance, you can directly access Calendar, Clock, Wireless Settings, Settings, Weather, Battery, really whatever you want to add to the zooper widget interface by only taking up one App Icon Space in the second screen. I'm writing a more concise post now and will modify it. I added a screenshot of the widget below, it's legible.
:good:
Hi there
Whenever I install an app a new page gets created and the shortcut for app goes on that page, even though the three pages/screens already have a lot of space left.
Is there a setting somewhere which would stop adding the shortcut after creating a new screen.
Launcher and all settings are factory based with original Samsung firmware.
Thank you for your time.
Go to home settings and untick "Add apps to home screen". That way whenever you install a new app, no shortcut is created. If you still want to have a shortcut made but limited to adding to current screens instead of creating a new page, I have no idea on that.
Sent from my SM-N975F using Tapatalk
thephantom said:
Go to home settings and untick "Add apps to home screen". That way whenever you install a new app, no shortcut is created. If you still want to have a shortcut made but limited to adding to current screens instead of creating a new page, I have no idea on that.
Click to expand...
Click to collapse
I know how to disable, what I'm looking for is how to get shortcuts on current page.