Develop Bugs

[Q] How Could One Get 4G Working on Custom ROMs on a Virgin Mobile S3?

I have a Virgin Mobile S3.
So far, I have successfully flashed PA 3.69 and Liquidsmooth 2.9 on it. All went well with initialization and setup. However, data did not at first seem to work.
When I changed the network mode to CDMA/EvDo, I was able to receive a 3G signal, but never was able to get 4G to work.
I flashed a modem I found on another forum and altered the apns-conf.xml in /system/etc, but that did not help. I also flashed both ROMs on top of base build MD7, if that helps anyone.
Would data feasibly work if I flashed on top of MD4, instead?

Simple fix - maybe....
Higgs_Boson said:
I have a Virgin Mobile S3.
So far, I have successfully flashed PA 3.69 and Liquidsmooth 2.9 on it. All went well with initialization and setup. However, data did not at first seem to work.
When I changed the network mode to CDMA/EvDo, I was able to receive a 3G signal, but never was able to get 4G to work.
I flashed a modem I found on another forum and altered the apns-conf.xml in /system/etc, but that did not help. I also flashed both ROMs on top of base build MD7, if that helps anyone.
Would data feasibly work if I flashed on top of MD4, instead?
Click to expand...
Click to collapse
I was having the same problem and decided to check the easiest thing first - the setting for Mobile Networks (Settings->Wireless and Network->More Settings) was set to Global for some reason. I went under Network Mode and selected LTE/CDMA and the phone automatically rebooted. As soon as it was back up, it was in 4G!:highfive:
Give it a shot and see if it works for you. Sometimes the silliest things are the ones we overlook!

Just re flash the radio if you want to get service again.
Sent from my SPH-L710 using xda app-developers app

Work in progress...
Nobody seems to be able to get this working. I have spent many hours searching fourms.
I am willing to build from source if deemed necessary
I installed the latest stable sprint CyanogenMod (10.1.3) on my Virgin Mobile Galaxy S3
I am able to get full 3G but no 4G. I have tired the sprint modem, and two virgin mobile modems including the latest version. The modem does not seem to make a difference. I have copied the apns-conf.xml file and that did nothing. I did reboot and change radio modes. I think there is some software on the Virgin Mobile rom that makes it work. I have seen a few programs that run at startup. Of interest are "itson" and "chameleon". I think these enable 4G? how could I transfer these programs to run on CyanogenMod?
I am able to access 4g at full speed with the same modem and apns on the stock rom. I have TWRP backups of both CyanogenMod and the latest Virgin Mobile stock rom. I can switch between them easily.
Maybe there is an easy fix, via the build.prop?
Here is the build.prop
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JZO54K
ro.build.display.id=JZO54K.L710VPAMG2
ro.build.version.incremental=L710VPAMG2
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Fri Jul 19 12:06:39 KST 2013
ro.build.date.utc=1374203199
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-73
ro.build.tags=release-keys
ro.product.model=SPH-L710
ro.product.brand=samsung
ro.product.name=d2vmu
ro.product.device=d2vmu
ro.product.board=MSM8960
ro.chipname=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2vmu
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=d2vmu-user 4.1.2 JZO54K L710VPAMG2 release-keys
ro.build.fingerprint=samsung/d2vmu/d2vmu:4.1.2/JZO54K/L710VPAMG2:user/release-keys
ro.build.characteristics=chameleon
# Samsung Specific Properties
ro.build.PDA=L710VPAMG2
ro.build.hidden_ver=L710VPAMG2
ro.build.changelist=1293602
# end build properties
# 8960 RIL Basic
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
debug.compbypass.enable=1
debug.hwui.render_dirty_regions=true
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
debug.mdpcomp.maxlayer=3
#
# system props for the cne module
#
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.feature=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system property for Bluetooth Handsfree Profile version
#
ro.bluetooth.hfp.ver=1.6
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=1
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
ro.sf.lcd_density=320
# Use CDMALTE Phone
telephony.lteOnCdmaDevice=1
# Enable time services daemon
persist.timed.enable=true
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# Don't wait the card state for RADIO POWER request
persist.radio.no_wait_for_card=1
# For sys info indication
persist.radio.add_power_save=1
# Snapshot Setting
persist.radio.snapshot_enabled=1
persist.radio.snapshot_timer=22
# Control EONS (true = EONS enabled, false = EONS disabled)
persist.eons.enabled=false
# Data modules
ro.use_data_netmgrd=true
# Default ECCList (Except USCC)
ro.ril.ecclist=112,911,#911,*911
# Chameleon Default Operator (VMU with Chameloen)
ro.cdma.default_numeric=310000
ro.cdma.default_alpha=Samsung
# Do not show no sim notification
ro.config.donot_nosim=true
# ItsOn
ro.itson.path=/carrier/itson/resources/
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.hdcp2.rx=tz
ro.sec.fle.encryption=true
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=01_Over_the_horizon_Acoustic.ogg
ro.config.notification_sound=S_Whistle.ogg
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=off
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.1_r5
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Here is my current build.prop on CyanogenMod
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39E
ro.build.display.id=cm_d2spr-userdebug 4.2.2 JDQ39E eng.jenkins.20130923.122419 test-keys
ro.build.version.incremental=eng.jenkins.20130923.122419
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Mon Sep 23 12:25:18 PDT 2013
ro.build.date.utc=1379964318
ro.build.type=userdebug
ro.build.user=jenkins
ro.build.host=cyanogenmod
ro.build.tags=test-keys
ro.product.model=SPH-L710
ro.product.brand=samsung
ro.product.name=d2spr
ro.product.device=d2spr
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2spr
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=d2spr-user 4.1.2 JZO54K L710VPBMD4 release-keys
ro.build.fingerprint=samsung/d2spr/d2spr:4.1.2/JZO54K/L710VPBMD4:user/release-keys
ro.build.characteristics=default
ro.cm.device=d2spr
# end build properties
# system.prop for SPH-L710
#
# cannot take spaces
rild.libargs=-d /dev/smd0
ro.cdma.home.operator.numeric=310000
ro.cdma.home.operator.alpha=Sprint
ro.telephony.default_network=8
telephony.lteOnCdmaDevice=1
telephony.sms.pseudo_multipart=1
persist.radio.snapshot_enabled=1
persist.radio.snapshot_timer=22
persist.eons.enabled=false
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.sf.lcd_density=320
ro.hwui.text_cache_width=2048
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.ril.hsxpa=1
ro.ril.gprsclass=10
persist.radio.add_power_save=1
persist.radio.snapshot_disabled=1
com.qc.hardware=true
persist.radio.apm_sim_not_pwdn=1
ro.ril.transmitpower=true
ro.opengles.version=131072
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.speaker.location=high
ro.qc.sdk.audio.fluencetype=fluence
persist.timed.enable=true
ro.emmc.sdcard.partition=17
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=16
lpa.decode=true
rild.libpath=/system/lib/libril-qc-qmi-1.so
ril.subscription.types=NV,RUIM
ro.config.svlte1x=true
ro.cdma.subscribe_on_ruim_ready=true
persist.radio.no_wait_for_card=0
media.aac_51_output_enabled=true
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
ro.telephony.ril_class=SamsungQualcommRIL
ro.telephony.call_ring.multiple=0
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.rommanager.developerid=cyanogenmod
ro.url.legal=[LINK REMOVED DUE TO FORUM RULES]
ro.url.legal.android_privacy=[LINK REMOVED DUE TO FORUM RULES]
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=10.1.3-d2spr
ro.modversion=10.1.3-d2spr
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Argon.ogg
ro.config.alarm_alert=Hassium.ogg
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Please help! Any advice is appreciated!

I'm having the same issue with my Sprint Galaxy S3 on Credo Mobile. I get full 4G when i'm using a Touchwiz rom, but not with Cyanogenmod, nor any AOSP based ROMS.

drsn0w said:
I'm having the same issue with my Sprint Galaxy S3 on Credo Mobile. I get full 4G when i'm using a Touchwiz rom, but not with Cyanogenmod, nor any AOSP based ROMS.
Click to expand...
Click to collapse
"Newer" S3, and I don't get any data connection at all, despite a good signal.

drsn0w said:
I'm having the same issue with my Sprint Galaxy S3 on Credo Mobile. I get full 4G when i'm using a Touchwiz rom, but not with Cyanogenmod, nor any AOSP based ROMS.
Click to expand...
Click to collapse
I'm also a Credo customer, and I've never gotten LTE service. For that matter, 3G service is spotty.

I am having the same problem on the Project x rom no 4g

Has anyone tried THIS 4g fix(second post)? I used this fix for my boost gs3, but it breaks MMS. Either 3g and MMS or 4g and no MMS with this fix.

[STOCK ROM][FTF] Xperia T3 (D5103) 18.1.A.1.14 3 SE

Xperia™ T3 (D5103) 3 SE firmware FTF
Android version: 4.4.2
Kernel: 3.4.0 [email protected] #1 Fri Jun 6 14:55:30 CST 2014
Build number: 18.1.A.1.14
File System Version: GLOBAL-LTE_18.1.A.1.14
Customization Version: 1285-5313_R4B
Branding: 3 SE (branded)
Country: Sweden
This works on ANY Xperia™ T3 (D5103).
Your Xperia™ T3 does NOT have to be rooted.
Your Xperia™ T3 does NOT have to be bootloader unlocked.
This does NOT re-lock a SIM unlocked phone (unlocking is ONCE and PERMANENT).
This does NOT unlock your bootloader.
Download:
D5103 18.1.A.1.14 FTF ( 982.5 MB )
Build Prop
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Fri Jun 6 14:55:30 CST 2014
ro.build.date.utc=1402037730
ro.build.user=user
ro.build.host=SB2
##### Final patch of properties #####
ro.build.product=D5103
ro.build.description=D5103-user 4.4.2 18.1.A.1.14 8ft_bw release-keys
ro.product.brand=Sony
ro.product.name=D5103
ro.product.device=D5103
ro.build.version.incremental=8ft_bw
ro.build.tags=release-keys
ro.build.fingerprint=Sony/D5103/D5103:4.4.2/18.1.A.1.14/8ft_bw:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1285-5313
ro.semc.version.cust_revision=R4B
ro.somc.customerid=59
#############################################################################
################# Updating of the SW Version #################
ro.semc.version.fs_revision=18.1.A.1.14
ro.build.id=18.1.A.1.14
ro.build.display.id=18.1.A.1.14
##### Values from product package metadata #####
ro.semc.product.model=D5103
ro.semc.ms_type_id=PM-0730-BV
ro.semc.version.fs=GLOBAL-LTE
ro.semc.product.name=Xperia T3
ro.semc.product.device=D51
ro.product.model=D5103
# begin build properties
# autogenerated by buildinfo.sh
ro.si.version.sw_revision=2.24.J.1.26
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.type=user
ro.product.board=MSM8226
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
#
# from device/somc/seagull_lte/system.prop
#
#
# system.prop for msm8226
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
# Start in cdma mode
#ro.telephony.default_network=5
#
# system props for the cne module
#
persist.cne.feature=1
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.mixedmode.disable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
#9273 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
#+{WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01
# add product type property
ro.telephony.fxn_product_type=SEAGULL_LTE
#WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01}+
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#telephony.lteOnCdmaDevice=1//-WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
#+{WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
telephony.lteOnCdmaDevice=0
#WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01}+
#//+{WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01
persist.radio.rat_on=combine
#WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01}+
# simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
#+{WP1L2P3-AC-SET_RIL_LOG_LVL-01
#
# Set default adb_log_on value
#
persist.radio.adb_log_on=1
#WP1L2P3-AC-SET_RIL_LOG_LVL-01}+
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
#/* MM-KW-DISPLAY-00+{ */
# Enable/disable cabl
ro.qualcomm.cabl=0
#/* MM-KW-DISPLAY-00+} */
#MobileBraviaEngine2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Buffer size in kbytes for compress offload playback
# System prop for drm
drm.service.enabled=true
#Added system property for xLoud and ClearPhase
ro.somc.clearphase.supported=true
ro.semc.xloud.supported=true
persist.audio.hp=true
audio.offload.buffer.size.kb=32
#/* MM-CL-Offload-00*{ */
#disbale tunnel mode playback by default
audio.offload.disable=1
#disbale offload audio video playback by default
av.offload.enable=false
#/* MM-CL-Offload-00*} */
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#enable dsp gapless mode by default
audio.offload.gapless.enabled=true
# disable AssetAtlas service.
config.disable_atlas=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.config.wallpaper=hero_flow_black.png
ro.nfc.on.default=true
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.4_r3
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.ms=android-sonymobile
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.services.location
ro.gps.agps_provider=1
ro.drm.active.num=7
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.drm.active.5=widevine,1
ro.drm.active.6=dcp,1
ro.sony.fota.encrypteddata=supported
Mirrors Are Welcomed
Credits
M.Allen
Please Hit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If It Helps You

@Ben Ling Can u please upload kernel.sin from it? Mega seems down and I'll have to download whole of the ftf just for the kernel
Cheers,
AJ

Abhinav2 said:
@Ben Ling Can u please upload kernel.sin from it? Mega seems down and I'll have to download whole of the ftf just for the kernel
Cheers,
AJ
Click to expand...
Click to collapse
okay sure
there you go...
http://d-h.st/z20

Ben Ling said:
okay sure
there you go...
http://d-h.st/z20
Click to expand...
Click to collapse
Thanks BTW u own the device
EDIT: or know someone who does? @Ben Ling
Cheers,
AJ

Abhinav2 said:
Thanks BTW u own the device or no someone who does?
Cheers,
AJ
Click to expand...
Click to collapse
I didn't own it,I only have the Xperia Z...

Ben,
thank you very much for posting this .ftf for us!
I own a T3 and unlocked the bootloader however once I did it, the phone entered boot loop. After trying to flash a different kernel it doesn't leave the SONY screen at all. I tried using the flashtool by Androxyde but I always get "cannot open bundle error". Below are the messages I always get:
0/056/2014 17:56:14 - INFO - Selected Bundle for D5103. FW release : 18.1.A.1.14. Customization : 3 [email protected]
20/056/2014 17:56:14 - INFO - Preparing files for flashing
20/057/2014 17:57:24 - ERROR - .\firmwares\prepared\elabel-D5103-row_201406131600.1_18.1.A.1.14.sin (Acess denied)
20/057/2014 17:57:24 - INFO - Cannot open bundle. Flash operation canceled
Once I connect the phone to the USB while pushing the volume down button flashtool quickly recognizes it's in flashmode but then it appears to have lost the connection.
How can I successfully return my phone to factory status?
Thanks for your help!
JZ
---------- Post added at 08:00 PM ---------- Previous post was at 07:18 PM ----------
Ok, I passed the "access denied error". For some reason even though I was running flashtool as root the application wasn't being able to create the files on its directory. I transferred all files to my user folder and flashtool prepared the files correctly. Now I have a working phone again! I wish I was able to remove the branding though.
Best Regads,
JZ
jzeuro2 said:
Ben,
thank you very much for posting this .ftf for us!
I own a T3 and unlocked the bootloader however once I did it, the phone entered boot loop. After trying to flash a different kernel it doesn't leave the SONY screen at all. I tried using the flashtool by Androxyde but I always get "cannot open bundle error". Below are the messages I always get:
0/056/2014 17:56:14 - INFO - Selected Bundle for D5103. FW release : 18.1.A.1.14. Customization : 3 [email protected]
20/056/2014 17:56:14 - INFO - Preparing files for flashing
20/057/2014 17:57:24 - ERROR - .\firmwares\prepared\elabel-D5103-row_201406131600.1_18.1.A.1.14.sin (Acess denied)
20/057/2014 17:57:24 - INFO - Cannot open bundle. Flash operation canceled
Once I connect the phone to the USB while pushing the volume down button flashtool quickly recognizes it's in flashmode but then it appears to have lost the connection.
How can I successfully return my phone to factory status?
Thanks for your help!
JZ
Click to expand...
Click to collapse

Ben Ling said:
Xperia™ T3 (D5103) 3 SE firmware FTF
Android version: 4.4.2
Kernel: 3.4.0 [email protected] #1 Fri Jun 6 14:55:30 CST 2014
Build number: 18.1.A.1.14
File System Version: GLOBAL-LTE_18.1.A.1.14
Customization Version: 1285-5313_R4B
Branding: 3 SE (branded)
Country: Sweden
This works on ANY Xperia™ T3 (D5103).
Your Xperia™ T3 does NOT have to be rooted.
Your Xperia™ T3 does NOT have to be bootloader unlocked.
This does NOT re-lock a SIM unlocked phone (unlocking is ONCE and PERMANENT).
This does NOT unlock your bootloader.
Download:
D5103 18.1.A.1.14 FTF ( 982.5 MB )
Build Prop
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Fri Jun 6 14:55:30 CST 2014
ro.build.date.utc=1402037730
ro.build.user=user
ro.build.host=SB2
##### Final patch of properties #####
ro.build.product=D5103
ro.build.description=D5103-user 4.4.2 18.1.A.1.14 8ft_bw release-keys
ro.product.brand=Sony
ro.product.name=D5103
ro.product.device=D5103
ro.build.version.incremental=8ft_bw
ro.build.tags=release-keys
ro.build.fingerprint=Sony/D5103/D5103:4.4.2/18.1.A.1.14/8ft_bw:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1285-5313
ro.semc.version.cust_revision=R4B
ro.somc.customerid=59
#############################################################################
################# Updating of the SW Version #################
ro.semc.version.fs_revision=18.1.A.1.14
ro.build.id=18.1.A.1.14
ro.build.display.id=18.1.A.1.14
##### Values from product package metadata #####
ro.semc.product.model=D5103
ro.semc.ms_type_id=PM-0730-BV
ro.semc.version.fs=GLOBAL-LTE
ro.semc.product.name=Xperia T3
ro.semc.product.device=D51
ro.product.model=D5103
# begin build properties
# autogenerated by buildinfo.sh
ro.si.version.sw_revision=2.24.J.1.26
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.type=user
ro.product.board=MSM8226
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
#
# from device/somc/seagull_lte/system.prop
#
#
# system.prop for msm8226
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
# Start in cdma mode
#ro.telephony.default_network=5
#
# system props for the cne module
#
persist.cne.feature=1
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.mixedmode.disable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
#9273 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
#+{WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01
# add product type property
ro.telephony.fxn_product_type=SEAGULL_LTE
#WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01}+
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#telephony.lteOnCdmaDevice=1//-WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
#+{WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
telephony.lteOnCdmaDevice=0
#WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01}+
#//+{WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01
persist.radio.rat_on=combine
#WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01}+
# simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
#+{WP1L2P3-AC-SET_RIL_LOG_LVL-01
#
# Set default adb_log_on value
#
persist.radio.adb_log_on=1
#WP1L2P3-AC-SET_RIL_LOG_LVL-01}+
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
#/* MM-KW-DISPLAY-00+{ */
# Enable/disable cabl
ro.qualcomm.cabl=0
#/* MM-KW-DISPLAY-00+} */
#MobileBraviaEngine2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Buffer size in kbytes for compress offload playback
# System prop for drm
drm.service.enabled=true
#Added system property for xLoud and ClearPhase
ro.somc.clearphase.supported=true
ro.semc.xloud.supported=true
persist.audio.hp=true
audio.offload.buffer.size.kb=32
#/* MM-CL-Offload-00*{ */
#disbale tunnel mode playback by default
audio.offload.disable=1
#disbale offload audio video playback by default
av.offload.enable=false
#/* MM-CL-Offload-00*} */
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#enable dsp gapless mode by default
audio.offload.gapless.enabled=true
# disable AssetAtlas service.
config.disable_atlas=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.config.wallpaper=hero_flow_black.png
ro.nfc.on.default=true
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.4_r3
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.ms=android-sonymobile
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.services.location
ro.gps.agps_provider=1
ro.drm.active.num=7
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.drm.active.5=widevine,1
ro.drm.active.6=dcp,1
ro.sony.fota.encrypteddata=supported
Mirrors Are Welcomed
Credits
M.Allen
Please Hit
If It Helps You
Click to expand...
Click to collapse
Can you make a zip file of System? @Ben Ling

Bro can u port cyanogenmod rom for t3 d5102
Ben Ling said:
Xperia™ T3 (D5103) 3 SE firmware FTF
Android version: 4.4.2
Kernel: 3.4.0 [email protected] #1 Fri Jun 6 14:55:30 CST 2014
Build number: 18.1.A.1.14
File System Version: GLOBAL-LTE_18.1.A.1.14
Customization Version: 1285-5313_R4B
Branding: 3 SE (branded)
Country: Sweden
This works on ANY Xperia™ T3 (D5103).
Your Xperia™ T3 does NOT have to be rooted.
Your Xperia™ T3 does NOT have to be bootloader unlocked.
This does NOT re-lock a SIM unlocked phone (unlocking is ONCE and PERMANENT).
This does NOT unlock your bootloader.
Download:
D5103 18.1.A.1.14 FTF ( 982.5 MB )
Build Prop
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Fri Jun 6 14:55:30 CST 2014
ro.build.date.utc=1402037730
ro.build.user=user
ro.build.host=SB2
##### Final patch of properties #####
ro.build.product=D5103
ro.build.description=D5103-user 4.4.2 18.1.A.1.14 8ft_bw release-keys
ro.product.brand=Sony
ro.product.name=D5103
ro.product.device=D5103
ro.build.version.incremental=8ft_bw
ro.build.tags=release-keys
ro.build.fingerprint=Sony/D5103/D5103:4.4.2/18.1.A.1.14/8ft_bw:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1285-5313
ro.semc.version.cust_revision=R4B
ro.somc.customerid=59
#############################################################################
################# Updating of the SW Version #################
ro.semc.version.fs_revision=18.1.A.1.14
ro.build.id=18.1.A.1.14
ro.build.display.id=18.1.A.1.14
##### Values from product package metadata #####
ro.semc.product.model=D5103
ro.semc.ms_type_id=PM-0730-BV
ro.semc.version.fs=GLOBAL-LTE
ro.semc.product.name=Xperia T3
ro.semc.product.device=D51
ro.product.model=D5103
# begin build properties
# autogenerated by buildinfo.sh
ro.si.version.sw_revision=2.24.J.1.26
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.type=user
ro.product.board=MSM8226
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
#
# from device/somc/seagull_lte/system.prop
#
#
# system.prop for msm8226
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
# Start in cdma mode
#ro.telephony.default_network=5
#
# system props for the cne module
#
persist.cne.feature=1
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.mixedmode.disable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
#9273 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
#+{WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01
# add product type property
ro.telephony.fxn_product_type=SEAGULL_LTE
#WP1L2P2-PC-DISTINGUISH_PROJECTS_VIA_SYSTEM_PROPERTY-01}+
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#telephony.lteOnCdmaDevice=1//-WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
#+{WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01
telephony.lteOnCdmaDevice=0
#WP1L2P2-PC-SET_CDMA_DEVICE_PROPERTY_TO_FALSE-01}+
#//+{WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01
persist.radio.rat_on=combine
#WP1L2P2-AS-NETWORK_LIST_RAT_SUPPORT-01}+
# simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
#+{WP1L2P3-AC-SET_RIL_LOG_LVL-01
#
# Set default adb_log_on value
#
persist.radio.adb_log_on=1
#WP1L2P3-AC-SET_RIL_LOG_LVL-01}+
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
#/* MM-KW-DISPLAY-00+{ */
# Enable/disable cabl
ro.qualcomm.cabl=0
#/* MM-KW-DISPLAY-00+} */
#MobileBraviaEngine2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Buffer size in kbytes for compress offload playback
# System prop for drm
drm.service.enabled=true
#Added system property for xLoud and ClearPhase
ro.somc.clearphase.supported=true
ro.semc.xloud.supported=true
persist.audio.hp=true
audio.offload.buffer.size.kb=32
#/* MM-CL-Offload-00*{ */
#disbale tunnel mode playback by default
audio.offload.disable=1
#disbale offload audio video playback by default
av.offload.enable=false
#/* MM-CL-Offload-00*} */
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#enable dsp gapless mode by default
audio.offload.gapless.enabled=true
# disable AssetAtlas service.
config.disable_atlas=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.config.wallpaper=hero_flow_black.png
ro.nfc.on.default=true
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.4_r3
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.ms=android-sonymobile
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.services.location
ro.gps.agps_provider=1
ro.drm.active.num=7
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.drm.active.5=widevine,1
ro.drm.active.6=dcp,1
ro.sony.fota.encrypteddata=supported
Mirrors Are Welcomed
Credits
M.Allen
Please Hit
If It Helps You
Click to expand...
Click to collapse
Bro can u port CM rom for T3 D5102 (Indian Version) or a stock android 4.4.4 , will be very helpful for us:good::good::good::good::good:

[Q] Last lines in Build.prop

My phone is rooted and I recently changed a few settings in build.prop so I could write with a pencil, not sure if it worked but when I went back to delete it when I thought it didn't work that is the line I copy pasted then in the process I deleted the last lines of Additional Build Props in mistake, I want to put them back but I don't know what they are please help thanks, this is what I have now: ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
ro.secwvk=144
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.media_sound=Over_the_horizon_Acoustic.ogg
ro.monkey=0
ro.error.receiver.default=com.samsung.receiver.error
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.crypto.support=recovery_mount|others
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.com.google.gmsversion=4.2_r3
ro.build.selinux=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
persist.gps.qc_nlp_in_use=0

Although
I just tested with a pencil and change in sensitivity works, but still the lines are missing and I am a bit worried, can anybody copy paste who has rooted Samsung Galaxy S4 Mini ?

Here you are:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.I9195XXUCNE6
ro.build.version.incremental=I9195XXUCNE6
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Fri May 23 19:49:46 KST 2014
ro.build.date.utc=1400842186
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD5815
ro.build.tags=release-keys
ro.product.model=GT-I9195
ro.product.brand=samsung
ro.product.name=serranoltexx
ro.product.device=serranolte
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=serranolte
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=serranoltexx-user 4.4.2 KOT49H I9195XXUCNE6 release-keys
ro.build.fingerprint=samsung/serranoltexx/serranolte:4.4.2/KOT49H/I9195XXUCNE6:user/release-keys
ro.build.characteristics=phone
# Samsung Specific Properties
ro.build.PDA=I9195XXUCNE6
ro.build.hidden_ver=I9195XXUCNE6
ro.build.changelist=1646188
ro.product_ship=true
ro.chipname=MSM8930AB
persist.sys.storage_preload=1
ro.build.knox.container=
# end build properties
#
# from device/samsung/serranolte/system.prop
#
#
# system.prop for surf
#
ro.sf.lcd_density=240
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
#
# system props for the cne module
#
persist.cne.feature=0
lpa.decode=true
tunnel.decode=false
tunnel.audiovideo.decode=false
lpa.use-stagefright=true
qcom.hw.aac.encoder=true
audio.offload.disable=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
#33395 is sum of supported format flags in AAL
#Formats: AVI AC3 ASF AAC QCP DTS 3G2
mm.enable.qcom_parser=33395
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=false
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=0
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
#property to check if dynamic resolution change is supported in framework
ro.streaming.video.drs=true
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#system prop for setting rmnet mux mode
persist.rmnet.mux=disabled
#
# System prop for Tvout/HDMI
#
persist.sys.camera.transform=0
persist.sys.camera.connect=0
persist.sys.videomode=0
ro.hdmi.enable=true
# System property for Default Brightness
ro.lcd_min_brightness=10
ro.lcd_brightness=162
# System proverty for sys info indication
persist.radio.add_power_save=1
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
# System prop for SPN
persist.radio.prefer_spn=0
#system prop for KDHA tuning
ro.config.dha_cached_max=8
ro.config.dha_empty_max=42
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=1m
dalvik.vm.heapmaxfree=4m
ro.build.scafe=americano
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
media.enable-commonsource=true
ro.secwvk=144
ro.securestorage.knox=true
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.media_sound=Over_the_horizon_Acoustic.ogg
ro.error.receiver.default=com.samsung.receiver.error
ro.setupwizard.mode=OPTIONAL
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=4.4.2_r2
persist.sys.dalvik.vm.lib=libdvm.so
ro.kernel.qemu=0
ro.build.selinux=1
ro.config.knox=v30
ro.config.tima=1
ro.config.timaversion=2.0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=1
ro.gps.agps_provider=1
Sent from my black pearl using Tapatalk

Awesome
Thanks mate exactly what I needed.

[ROM][6.0.1] G920P PI3 Edge Multi CSC Multi Languages (En, Fr, Ar, ...)

Based on ROM:
G920PVPS4CPI3
ROM OS Version:
6.0.1 Marshmallow
ROM Kernel: (Choice by aroma)
1. STOCK Linux 3.10.61
2. SkyHigh 3.34 Linux 3.10.101
3. SuperNOVA 7-9-16 Linux 3.10.x
Features:
- Aroma Installer
- Deodexed
- Rooted
- Busybox
- Multi-User
- Knox Removed
- ItsOn Removed
- Sprint App Removed
- Multi CSC (56)
- Multi Languages (En, Fr, Ar, . . . )
- CSC features
- build.prob tweaks
- Edge Features
- GSM/WCDMA/LTE enabled ( and CDMA/EVDO V 1.1)
- FM Radio (works at 50%,The signal is very weak)
- Screen lock does not work and f-print
How to install:
You MUST be on 6.0.1 Firmware to flash these Rom
1) Make a backup of your existing rom and any apps;
2) Place rom zip in internal storage;
3) Boot into recovery and wipe cache, dalvik and data;
4) Flash rom.
Download V 1.1 md5: 01d9f0b2422d98a0ab999c10a5fe17e3
XDA:DevDB Information
RomAB, ROM for the Sprint Samsung Galaxy S6
Contributors
abbn78
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 6.0.1
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2016-11-29
Created 2016-10-25
Last Updated 2016-10-25

How is this different than the other Edge Multi ROM?

This ROM is fully multilingual ! : ( en_GB ; en_US ; fr ; de ; es;af;agq;ak;am;ar;ar_AE;ar_BH;ar_DZ;ar_EG;ar_IQ;ar_JO;ar_LB;ar_MA;ar_SA;ar_SY;ar_TN;ar_YE; . . . ).

Good job brother Rom wonderful. But the screen lock does not work and fprint!?

thank you for the work, i couldn't get data to work, might have been my phone, going to odin back to stock and retry. fyi new firmware CPJ1 just released today

This ROM Saved MY PHONE with the MULTI CSC , get Stucked with a wrong 920p Firmwarez !! Great Jobs
My Original Issue

I've lost my SIM Unlock, am getting noo network, am in Africa using a different network

Hey! Can we use to change the csc region of glaxay s6? Since yours is the only rom that is giving me the option of selecting the regionm pre flash. I tried flashing multiple official roms but stilll no use. I want to select PAK region, is there any workaound for my problem?
Thanks

Mr.X007 said:
Hey! Can we use to change the csc region of glaxay s6? Since yours is the only rom that is giving me the option of selecting the regionm pre flash. I tried flashing multiple official roms but stilll no use. I want to select PAK region, is there any workaound for my problem?
Thanks
Click to expand...
Click to collapse
try this CSC Changer or this .

dexterde said:
I've lost my SIM Unlock, am getting noo network, am in Africa using a different network
Click to expand...
Click to collapse
Make restoring your backup efs !

abbn78 said:
try this CSC Changer or this .
Click to expand...
Click to collapse
Thanks! Will try.

you can make full grace Ux rom ???

Fix screen lock
omer.sati said:
Good job brother Rom wonderful. But the screen lock does not work and fprint!?
Click to expand...
Click to collapse
How i can fix screen lock ?
---------- Post added at 08:24 AM ---------- Previous post was at 08:19 AM ----------
How should i do fix ?what should i do with download file?

Bealex317 said:
How i can fix screen lock ?
---------- Post added at 08:24 AM ---------- Previous post was at 08:19 AM ----------
How should i do fix ?what should i do with download file?
Click to expand...
Click to collapse
Download : Fix Lock screen & Fingerprint
1) Place rom zip in internal storage;
2) Boot into recovery and wipe cache and dalvik;
3) Flash this file.

dexterde said:
I've lost my SIM Unlock, am getting noo network, am in Africa using a different network
Click to expand...
Click to collapse
I have same problem in brazil.When I install the rom the phone is no signal, when I write the original firmware back signal.

gsaalmeida said:
I have same problem in brazil.When I install the rom the phone is no signal, when I write the original firmware back signal.
Click to expand...
Click to collapse
After flashing the ROM try to replace this file "build.prop" in the root directory /system
with root explorer (this file is the original file of the PI3 ROM).
Because this file is modified to support GSM networks (the original is for CDMA networks)
Original file :
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MMB29K
ro.build.display.id=MMB29K.G920PVPS4CPI3
ro.build.version.incremental=G920PVPS4CPI3
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=6.0.1
ro.build.version.security_patch=2016-09-01
ro.build.version.base_os=samsung/zerofltespr/zerofltespr:6.0.1/MMB29K/G920PVPU3CPG3:user/release-keys
ro.build.date=Tue Sep 20 09:53:14 KST 2016
ro.build.date.utc=1474332794
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD6321
ro.build.tags=release-keys
ro.build.flavor=zerofltespr-user
ro.product.model=SM-G920P
ro.product.brand=samsung
ro.product.name=zerofltespr
ro.product.device=zerofltespr
ro.product.board=universal7420
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=samsung
ro.product.locale=en-US
ro.wifi.channels=
ro.board.platform=exynos5
# ro.build.product is obsolete; use ro.product.device
ro.build.product=zerofltespr
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=zerofltespr-user 6.0.1 MMB29K G920PVPS4CPI3 release-keys
ro.build.fingerprint=samsung/zerofltespr/zerofltespr:6.0.1/MMB29K/G920PVPS4CPI3:user/release-keys
ro.build.characteristics=chameleon
# Samsung Specific Properties
ro.build.PDA=G920PVPS4CPI3
ro.build.hidden_ver=G920PVPS4CPI3
ro.config.rm_preload_enabled=0
ro.build.changelist=8847946
ro.product_ship=true
ro.build.official.release=true
ro.chipname=exynos7420
# end build properties
#
# HWUI_BUILD_PROPERTIES
#
ro.hwui.texture_cache_size=88
ro.hwui.layer_cache_size=58
ro.hwui.path_cache_size=16
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.shape_cache_size=4
ro.hwui.gradient_cache_size=2
ro.hwui.drop_shadow_cache_size=6
ro.hwui.r_buffer_cache_size=8
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=4096
ro.hwui.text_large_cache_height=2048
ro.hwui.fbo_cache_size=16
#
# from device/samsung/zerofltespr/system.prop
#
#
# system.prop for universal7420
#
#
# Integrate the Kineto VOWIFI changes
#rild.libpath=/system/lib64/libsec-ril.so
rild.libpath=/system/lib64/librilswitch.so
rilswitch.vendorlibpath=/system/lib64/libsec-ril.so
rilswitch.cfilibpath=/system/lib64/libcfiril.so
# End of kineto change
#
rild.libargs=-d /dev/smd0
ro.sf.lcd_density=640
ro.arch=exynos7420
persist.demo.hdmirotationlock=false
ro.zygote.disable_gl_preload=1
ro.sf.lcd_density=640
# Multimedia property for Smart View
media.enable-commonsource=true
# Enable time services daemon
persist.timed.enable=true
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# Don't wait the card state for RADIO POWER request
persist.radio.no_wait_for_card=1
# For sys info indication
persist.radio.add_power_save=1
# Snapshot setting
persist.radio.snapshot_enabled=1
persist.radio.snapshot_timer=22
# Use CP SE13 Table
persist.radio.use_se_table_only=1
# Default ECCList
ro.ril.ecclist=911,#911,*911
# QMI mux enabled for Fusion 4.0 (For APQ8084 model, MDM9x35)
persist.rmnet.mux=enabled
# Use CDMALTE Phone (For 4G model)
telephony.lteOnCdmaDevice=1
# Support Global Mode (For global mode model)
ro.config.multimode_cdma=1
# Data modules (For evolution RIL model)
ro.use_data_netmgrd=false
persist.data.netmgrd.qos.enable=false
# Use data service state for signal display (Except USC CS model)
ro.config.combined_signal=true
# Default Network Mode (For 4G / Global model)
ro.telephony.default_network=10
# Chameleon Default Operator (SPR with Chameleon)
ro.cdma.default_numeric=310000
ro.cdma.default_alpha=Chameleon
# Multimedia property for Camcorder Recording
media.sfrec.adj_frames=2
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.astcenc.astcsupport=1
ro.mct.compressiontype=ETC1
ro.config.tima=1
ro.config.timaversion=3.0
ro.config.dmverity=true
ro.config.rkp=true
ro.config.kap_default_on=true
ro.config.kap=true
ro.ril.ecclist=911,#911,*911
ril.subscription.types=NV,RUIM
ro.com.android.dataroaming=true
ro.telephony.default_network=10
ro.cdma.default_numeric=310000
ro.cdma.default_alpha=Chameleon
ro.use_data_netmgrd=false
persist.radio.sib16_support=0
dalvik.vm.image-dex2oat-filter=speed
dalvik.vm.dex2oat-filter=speed
ro.config.notification_sound=Skyline.ogg
ro.config.vc_call_vol_steps=7
ro.config.ringtone=Over_the_Horizon.ogg
ro.config.alarm_alert=Morning_Flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.config.ringtone_2=Basic_Bell.ogg
ro.config.notification_sound_2=S_Charming_Bell.ogg
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.opengles.version=196609
ro.sf.lcd_density=480
debug.hwc.force_gpu=0
debug.hwc.nodirtyregion=0
debug.hwc.winupdate=1
drm.service.enabled=true
ro.hdcp2.rx=tz
ro.secwvk=220
ro.securestorage.support=true
ro.build.scafe=capuccino
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.build.scafe.cream=white
ro.build.scafe.version=2016A
ro.sec.fle.encryption=false
ro.im.param.offset=7341648
ro.me.param.offset=7341728
ro.sn.param.offset=7341808
ro.pr.param.offset=7341888
ro.sku.param.offset=7341968
security.mdpp=None
ro.security.mdpp.ver=2.0
ro.security.mdpp.release=6
security.mdpp.result=None
ro.hardware.keystore=mdfpp
ro.security.vpnpp.ver=1.4
ro.security.vpnpp.release=6.1
ro.error.receiver.default=com.samsung.receiver.error
ro.config.dha_cached_min=6
ro.config.dha_cached_max=12
ro.config.dha_empty_min=8
ro.config.dha_lmk_scale=1.909
ro.config.64bit_lmk_enable=false
ro.config.dha_pwhitelist_enable=1
config.disable_atlas=true
sys.config.samp_oak_enable=true
sys.config.samp_oakoom_enable=true
sys.config.bigdata_enable=true
sys.config.bigdata_mem_enable=true
ro.security.mdpp.ux=Enabled
ro.frp.pst=/dev/block/persistent
keyguard.no_require_sim=true
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.security.icd.flagmode=multi
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=6.0_r4
ro.com.google.clientidbase.gmm=android-samsung
ro.build.selinux=1
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=generic
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a15
dalvik.vm.isa.arm.features=default
ro.config.knox=v30
ro.kernel.qemu=0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
ro.build.version.sdl=2301
ro.itson.path=/carrier/itson/
ro.expect.recovery_id=0x0a6245af52fb585c8dd00943e4f8d2e1c3dfdb1e000000000000000000000000
Modified file (to support GSM networks) :
Code:
# begin build properties
ro.build.id=MMB29K
ro.build.display.id=MMB29K.G920FXXS4CPI3
ro.build.version.incremental=G920FXXS4CPI3
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=6.0.1
ro.build.version.security_patch=2016-09-01
ro.build.version.base_os=samsung/zerofltexx/zeroflte:6.0.1/MMB29K/G920FXXU3CPG3:user/release-keys
ro.build.date=Tue Sep 20 09:56:53 KST 2016
ro.build.date.utc=1474333013
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWHC3716
ro.build.tags=release-keys
ro.build.flavor=zerofltexx-user
ro.product.model=SM-G920F
ro.product.brand=samsung
ro.product.name=zerofltexx
ro.product.device=zerofltexx
ro.product.board=universal7420
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=samsung
ro.product.locale=en-GB
ro.wifi.channels=
ro.board.platform=exynos5
ro.build.product=zeroflte
ro.build.description=zerofltexx-user 6.0.1 MMB29K G920FXXS4CPI3 release-keys
ro.build.fingerprint=samsung/zerofltexx/zeroflte:6.0.1/MMB29K/G920FXXS4CPI3:user/release-keys
ro.build.characteristics=nosdcard
ro.build.PDA=G920FXXS4CPI3
ro.build.hidden_ver=G920FXXS4CPI3
ro.config.rm_preload_enabled=0
ro.build.changelist=8847946
ro.product_ship=true
ro.build.official.release=true
ro.chipname=exynos7420
# end build properties
#
# HWUI_BUILD_PROPERTIES
#
ro.hwui.texture_cache_size=88
ro.hwui.layer_cache_size=58
ro.hwui.path_cache_size=16
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.shape_cache_size=4
ro.hwui.gradient_cache_size=2
ro.hwui.drop_shadow_cache_size=6
ro.hwui.r_buffer_cache_size=8
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=4096
ro.hwui.text_large_cache_height=2048
ro.hwui.fbo_cache_size=16
#
# from device/samsung/zerofte/system.prop
#
# system.prop for universal7420
#
#
# Integrate the Kineto VOWIFI changes
# rild.libpath=/system/lib64/libsec-ril.so
# rild.libpath=/system/lib64/librilswitch.so
# rilswitch.vendorlibpath=/system/lib64/libsec-ril.so
# rilswitch.cfilibpath=/system/lib64/libcfiril.so
# End of kineto change
#
rild.libargs=-d /dev/smd0
ro.sf.lcd_density=640
# RIL team modification
# qos will temporary false while supporting qos in EVO-RIL.
persist.data.netmgrd.qos.enable=false
ro.arch=exynos7420
persist.demo.hdmirotationlock=false
ro.zygote.disable_gl_preload=1
# Multimedia property for Smart View
media.enable-commonsource=true
# Enable time services daemon
# persist.timed.enable=true
[COLOR="Blue"]# General GSM Settings *********************
ro.telephony.default_network=9[/COLOR]
# ro.ril.def.preferred.network=9
[COLOR="Blue"]telephony.lteOnCdmaDevice=0
telephony.lteOnGsmDevice=1
ro.config.multimode_cdma=0[/COLOR]
persist.ril.modem.mode=2
persist.radio.vzw.cdma.mdn=deleted
ro.telephony.gsm-routes-us-smsc=0
persist.radio.ap.phonetype=1
persist.radio.lte.mm.disable=1
persist.ril.features=0x102
ro.HorizontalBUA=false
ro.HorizontalVVM=false
ro.telephony.ril.v3=signalstrength,skipbrokendatac all,writeaidonly
ro.telephony.ril.config=writeaidonly,signalstrength
telephony.rilV7NeedCDMALTEPhone=false
ro.cdma.subscribe_on_ruim_ready=false
persist.ril.mux.noofchannels=10
ro.cdma.nbpcd=0
ro.cdma.subscription=0
ro.com.android.dataroaming=false
ro.radio.networkmode=enable
ro.telephony.get_imsi_from_sim=true
persist.radio.apm_sim_not_pwdn=1
# Don't wait the card state for RADIO POWER request
persist.radio.no_wait_for_card=1
ro.telephony.call_ring.delay=0
# For sys info indication
persist.radio.add_power_save=1
# Multimedia property for Camcorder Recording
media.sfrec.adj_frames=2
#
# ADDITIONAL_BUILD_PROPERTIES
#
fw.max_users=3
fw.show_multiuserui=1
fw.show_hidden_users=1
fw.power_user_switcher=1
#Adb
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Enable ADB Debugging By Default & Disable USB Debugging
androidboot.selinux=0
boot.fps=20
shutdown.fps=20
mot.proximity.delay=15
persist.cne.feature=0
persist.mtp.notify=0
persist.usb.notify=0
pm.sleep_mode=1
ro.config.dmverity=false
ro.config.knox=0
ro.config.nocheckin=1
ro.config.tima=0
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
ro.lge.proximity.delay=15
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.ril.disable.power.collapse=0
ro.ril.enable.amr.wideband=1
ro.ril.fast.dormancy.rule=0
ro.securestorage.knox=false
ro.securestorage.support=false
ro.security.mdpp.ux=Disabled
ro.sys.fw.use_trim_settings=true
security.knox_kap_mode=false
sys.config.samp_spcm_enable=false
sys.config.spcm_db_enable=false
sys.config.spcm_db_launcher=false
sys.config.spcm_preload_enable=false
sys.config.spcm_gcm_kill_enable=false
wlan.wfd.hdcp=disable
##
ro.astcenc.astcsupport=1
ro.mct.compressiontype=ETC1
ro.config.rkp=true
ro.config.kap_default_on=true
ro.config.kap=true
ro.ril.ecclist=112,911,#911,*911
ril.subscription.types=NV,RUIM
ro.use_data_netmgrd=false
persist.radio.sib16_support=0
dalvik.vm.image-dex2oat-filter=speed
dalvik.vm.dex2oat-filter=speed
ro.config.notification_sound=Skyline.ogg
# ro.config.vc_call_vol_steps=7
ro.config.ringtone=Over_the_Horizon.ogg
ro.config.alarm_alert=Morning_Flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.config.ringtone_2=Basic_Bell.ogg
ro.config.notification_sound_2=S_Charming_Bell.ogg
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.opengles.version=196609
debug.hwc.force_gpu=0
debug.hwc.nodirtyregion=0
debug.hwc.winupdate=1
drm.service.enabled=true
ro.hdcp2.rx=tz
ro.secwvk=220
ro.build.scafe=capuccino
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.build.scafe.cream=white
ro.build.scafe.version=2016A
ro.sec.fle.encryption=false
ro.im.param.offset=7341648
ro.me.param.offset=7341728
ro.sn.param.offset=7341808
ro.pr.param.offset=7341888
ro.sku.param.offset=7341968
security.mdpp=None
ro.security.mdpp.ver=2.0
ro.security.mdpp.release=6
security.mdpp.result=None
ro.hardware.keystore=mdfpp
ro.security.vpnpp.ver=1.4
ro.security.vpnpp.release=6.1
ro.error.receiver.default=com.samsung.receiver.error
ro.config.dha_cached_min=6
ro.config.dha_cached_max=12
ro.config.dha_empty_min=8
ro.config.dha_lmk_scale=1.909
ro.config.64bit_lmk_enable=false
ro.config.dha_pwhitelist_enable=1
config.disable_atlas=true
sys.config.samp_oak_enable=true
sys.config.samp_oakoom_enable=true
sys.config.bigdata_enable=true
sys.config.bigdata_mem_enable=true
keyguard.no_require_sim=true
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.security.icd.flagmode=multi
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
#ro.setupwizard.network_required=false
#ro.setupwizard.mode=OPTIONAL
ro.setupwizard.mode=DISABLED
# ro.com.google.gmsversion=6.0_r4
ro.com.google.clientidbase.gmm=android-samsung
ro.build.selinux=1
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=generic
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a15
dalvik.vm.isa.arm.features=default
ro.kernel.qemu=0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
ro.build.version.sdl=2301
# ro.itson.path=/carrier/itson/
ro.expect.recovery_id=0xeea345a12651beb6c5b486f30968e49fa48eb5ef000000000000000000000000
dalvik.vm.checkjni=false
dalvik.vm.dexopt-flags=m=y
dalvik.vm.dexopt-flags=m=y,v=n,o=v
dalvik.vm.execution-mode=int:jit
dalvik.vm.verify-bytecode=false
lpa.decode=false
lpa.use-stagefright=false
media.stagefright.enable-aac=true
media.stagefright.enable-http=true
media.stagefright.enable-meta=true
media.stagefright.enable-player=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
media.stagefright.enable-scan=true
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8
net.tcp.buffersize.hspa=6144,87380,524288,6144,163
net.tcp.buffersize.lte=524288,1048576,2097152,5242
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
persist.sys.shutdown.mode=hibernate
persist.sys.ui.hw=1
power.saving.mode=1
power_supply.wakeup=enable
profiler.force_disable_err_rpt=1
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.config.disable.hw_accel=false
ro.config.hw_fast_dormancy=1
ro.config.hw_menu_unlockscreen=false
ro.config.hw_power_saving=1
ro.product.gpu.driver=1
ro.ril.def.agps.mode=1
ro.ril.sensor.sleep.control=1
ro.secure=0
video.accelerate.hw=1
wifi.supplicant_scan_interval=180
windowsmgr.max_events_per_sec=100
ro.media.enc.jpeg.quality=95

Has anyone gotten this to work on Sprint S6, if so what steps did you take

wright0101 said:
Has anyone gotten this to work on Sprint S6, if so what steps did you take
Click to expand...
Click to collapse
This ROM for Sprint S6 (G920P), with multi csc (56 regions) modified to operate in GSM networks and with different languages support (En, Fr, Ar ...), that are not supported in the original ROM Sprint (G920P SPR).

I am currently sim locked. If I flash this rom do I get sim unlock?

abbn78 said:
After flashing the ROM try to replace this file "build.prop" in the root directory /system
with root explorer (this file is the original file of the PI3 ROM).
Because this file is modified to support GSM networks (the original is for CDMA networks)
[/CODE]
Click to expand...
Click to collapse
its possible to enable gsm and umts setting without modding build.prop i enabled it in my next rom version without build.prop
i fixed it through some csc codes
and also your rom doesn't access hiddenmenu through adb its useful to fix NV

Fortnite not working even after its open for all

Its not working for me even after it's open for all....it just through me out of lobby with error message given below in the screenshot.....
Help me
I wanna play

sameer 100 said:
Its not working for me even after it's open for all....it just through me out of lobby with error message given below in the screenshot.....
Help me
I wanna play
Click to expand...
Click to collapse
+1

If You want to play Fortnite as badly me then I will help you ...
Just follow the instruction
1. Using Build props edit apk on playstore edit the build prop to S7's build
2.now open magisk and hide it from all direction and rename the package in the settings or option
3.Now restart the phone....
Now installation
Download fortnite game but don't open
Now in magisk hide hide launcher and game both
Now disable the usb debugging also
Now open the game here you go the game works well
Note ...
My Config
Citrus CaF 7.1
Magisk 17.1
Gapps micro
Works with
Dot os 8.1
ACIP OS 8.1
(If u use 8.1 u can use s8,s9 and even note 9 build props) but it will have lag issues
Don't use thermal engine like ubercool and other stuff directly play ....becoz it may throttle the processor
If U have any doubt pls don't qoute the whole post below just replay

praveensm899 said:
If You want to play Fortnite as badly me then I will help you ...
Just follow the instruction
1. Using Build props edit apk on playstore edit the build prop to S7's build
If U have any doubt pls don't qoute the whole post below just replay
Click to expand...
Click to collapse
Could you share the S9 Build.prop lines? Like what all should I change?
And what do you mean by rename the package?

Simply4Nothing said:
Could you share the S9 Build.prop lines? Like what all should I change?
And what do you mean by rename the package?
Click to expand...
Click to collapse
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=NMF26F
ro.build.display.id=z2_plus-userdebug 7.1.1 NMF26F 56b641b8c7 test-keys
ro.build.version.incremental=56b641b8c7
ro.build.version.sdk=25
ro.build.version.preview_sdk=0
ro.build.version.codename=OFFICIAL
ro.build.version.all_codenames=REL
ro.build.version.release=7.1.1
ro.build.version.security_patch=2016-12-05
ro.build.version.base_os=
ro.build.date=sab 8 apr 2017, 23.11.24, CEST
ro.build.date.utc=1491685884
ro.build.type=userdebug
ro.build.user=dd3
ro.build.host=dd3lubuntu
ro.build.tags=test-keys
ro.build.flavor=hero2ltexx-user
ro.product.brand=samsung
ro.product.name=hero2ltexx
ro.product.board=msm8996
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=samsung
ro.product.locale=en-US
ro.wifi.channels=
ro.board.platform=msm8996
# ro.build.product is obsolete; use ro.product.device
ro.build.product=z2_plus
ro.product.model=SM-G935F
ro.product.device=hero2lte
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=z2_plus-userdebug 7.1.1 NMF26F 56b641b8c7 test-keys
ro.build.fingerprint=ZUK/z2_plus/z2_plus:7.1.1/NMF26F/56b641b8c7:userdebug/test-keys
ro.build.characteristics=nosdcard
ro.citrus.device=z2_plus
# end build properties
#
# from device/zuk/z2_plus/system.prop
#
# Audio
audio_hal.period_size=192
audio.deep_buffer.media=true
audio.offload.buffer.size.kb=32
audio.offload.gapless.enabled=true
audio.offload.multiaac.enable=true
audio.offload.multiple.enabled=true
audio.offload.pcm.16bit.enable=true
audio.offload.pcm.24bit.enable=true
audio.offload.track.enable=false
audio.offload.video=true
audio.safx.pbe.enabled=true
audio.parser.ip.buffer.size=262144
audio.dolby.ds2.enabled=false
audio.dolby.ds2.hardbypass=false
use.voice.path.for.pcm.voip=true
ro.qc.sdk.audio.ssr=false
ro.qc.sdk.audio.fluencetype=fluence
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
tunnel.audio.encode=false
# Bluetooth
bt.max.hfpclient.connections=1
qcom.bluetooth.soc=rome
ro.bluetooth.emb_wp_mode=true
ro.bluetooth.wipower=true
# Camera
persist.camera.imglib.fddsp=1
persist.camera.llc=1
persist.camera.llnoise=1
persist.camera.stats.test=0
camera.disable_zsl_mode=1
# CNE
persist.cne.feature=1
# Data modules
persist.data.mode=concurrent
persist.data.netmgrd.qos.enable=true
ro.use_data_netmgrd=true
persist.data.iwlan.enable=true
<<<<<<< HEAD
# Device was launched with M
ro.product.first_api_level=23
=======
>>>>>>> 8ed04f9... Move away from system_prop.mk in favor of system.prop
# Display (Qualcomm AD)
ro.qualcomm.cabl=2
ro.qcom.ad=1
ro.qcom.ad.calib.data=/system/etc/calib.cfg
ro.qcom.ad.sensortype=2
# Fingerprint
persist.qfp=false
# Flip panel
persist.panel.inversemounted=1
ro.panel.mountflip=3
# Google
ro.opa.eligible_device=true
# Graphics
debug.egl.hw=1
debug.gralloc.enable_fb_ubwc=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
persist.hwc.enable_vds=1
ro.opengles.version=196610
ro.sf.lcd_density=480
sdm.debug.disable_rotator_split=1
sdm.perf_hint_window=50
# GPS
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
# Hdmi
persist.speaker.prot.enable=true
qcom.hw.aac.encoder=true
# Media
flac.sw.decoder.24bit.support=true
media.aac_51_output_enabled=true
mm.enable.smoothstreaming=true
use.qti.sw.alac.decoder=true
use.qti.sw.ape.decoder=true
# NITZ
persist.rild.nitz_plmn=""
persist.rild.nitz_long_ons_0=""
persist.rild.nitz_long_ons_1=""
persist.rild.nitz_long_ons_2=""
persist.rild.nitz_long_ons_3=""
persist.rild.nitz_short_ons_0=""
persist.rild.nitz_short_ons_1=""
persist.rild.nitz_short_ons_2=""
persist.rild.nitz_short_ons_3=""
# Perf
ro.am.reschedule_service=true
ro.min_freq_0=307200
ro.min_freq_4=307200
ro.sys.fw.bg_apps_limit=60
ro.vendor.extension_library=libqti-perfd-client.so
# Radio
DEVICE_PROVISIONED=1
rild.libpath=/vendor/lib64/libril-qc-qmi-1.so
ril.subscription.types=NV,RUIM
ro.telephony.default_network=22,22
ro.telephony.default_cdma_sub=0
ro.telephony.call_ring.multiple=false
persist.data.qmi.adb_logmask=0
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.net.doxlat=true
persist.radio.add_power_save=1
persist.radio.apm_sim_not_pwdn=1
persist.radio.custom_ecc=1
persist.radio.flexmap_type=dds
persist.radio.force_on_dc=true
persist.radio.multisim.config=dsds
persist.radio.primarycard=true
persist.radio.rat_on=combine
persist.radio.sib16_support=1
persist.radio.sw_mbn_volte=1
persist.radio.sw_mbn_openmkt=1
# RmNet Data
persist.rmnet.data.enable=true
persist.data.wda.enable=true
persist.data.df.dl_mode=5
persist.data.df.ul_mode=5
persist.data.df.agg.dl_pkt=10
persist.data.df.agg.dl_size=4096
persist.data.df.mux_count=8
persist.data.df.iwlan_mux=9
persist.data.df.dev_name=rmnet_usb0
# Storage
persist.fuse_sdcard=true
# TimeService
persist.timed.enable=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=Titania.ogg
ro.config.notification_sound=Tethys.ogg
ro.carrier=unknown
ro.config.alarm_alert=Oxygen.ogg
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.r_buffer_cache_size=8
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=288m
dalvik.vm.heapsize=768m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
persist.debug.wfd.enable=1
keyguard.no_require_sim=true
ro.com.google.clientidbase=android-google
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.build.selinux=1
ro.opa.eligible_device=true
persist.sys.dun.override=0
media.sf.omx-plugin=libffmpeg_omx.so
media.sf.extractor-plugin=libffmpeg_extractor.so
persist.sys.recovery_update=false
BUILD_DISPLAY_ID=NMF26F
citrus.ota.version=CitrusCAF-z2_plus-3.1-TANGERINE-OFFICIAL-20170408
ro.citrus.version=3.1-TANGERINE
ro.modversion=CitrusCAF-z2_plus-3.1-TANGERINE-OFFICIAL-20170408
ro.citrus.buildtype=OFFICIAL
ro.citrus.flavour=TANGERINE
ro.bionic.ld.warning=1
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=kryo
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a53
dalvik.vm.isa.arm.features=default
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.expect.recovery_id=0x20fa159947c3855ed8a0466232abd82246d2a8e7000000000000000000000000
I'dont use S9 props becoz our zuk heats up faster
But u can use this build prop
Copy create new file and save as build.prop
In twrp mount system
In recovery twrp using file manager
Paste the file in system
And click on the pasted file and run CHMod755

Lags and closes after matchmaking
I didn't get any error message. After matchmaking the phone lags and fortnite closes. Any fix ?
I'm on PF nougat.

anirban.ds said:
I didn't get any error message. After matchmaking the phone lags and fortnite closes. Any fix ?
I'm on PF nougat.
Click to expand...
Click to collapse
+1