Hey guys,
So i was trying to upgrade to lollipop by flashing laf, boot, and system from twrp, and now i'm stuck in fastboot.
The problem is, fastboot doesn't seem to do anything. When i send a command, it shows on the LG Screen (fastboot: processing commands) but it doesn't actually do anything.
If i try to boot into the OS it shows Security Error, recovery is gone, all i have is fastboot mode.
Any help would be appreciated.
bartcoop2 said:
Hey guys,
So i was trying to upgrade to lollipop by flashing laf, boot, and system from twrp, and now i'm stuck in fastboot.
The problem is, fastboot doesn't seem to do anything. When i send a command, it shows on the LG Screen (fastboot: processing commands) but it doesn't actually do anything.
If i try to boot into the OS it shows Security Error, recovery is gone, all i have is fastboot mode.
Any help would be appreciated.
Click to expand...
Click to collapse
bring it in for repairs it is bricked
solution for no download mode , fastboot, qhsusb bulk , security error
Hi dear frends.
Its sad to know that all you guys cant go to download mode or facing security error or stuck in lg logo or in fastboot mode
And some guys stuck qhsuab bulk 9008
So the solution is here.
If you are unable to get into download mode then you need to force your g3 into qhsusb bulk mode by shorting the test point.
I will help u all guys.....
I will help u to unbrick ur any lg model wothout download mode or stuck in 9008 or anytype of problem.
Please let me know your problem in pm.
aftabalam8c2 said:
Hi dear frends.
Its sad to know that all you guys cant go to download mode or facing security error or stuck in lg logo or in fastboot mode
And some guys stuck qhsuab bulk 9008
So the solution is here.
If you are unable to get into download mode then you need to force your g3 into qhsusb bulk mode by shorting the test point.
I will help u all guys.....
I will help u to unbrick ur any lg model wothout download mode or stuck in 9008 or anytype of problem.
Please let me know your problem in pm.
Click to expand...
Click to collapse
hi bro i have this problem
no fastboot no download mode
how i unbrick my device?
Related
Hi all members,
I dont know anything much about develpoment, I have ZE551ML 32gb version. I rooted my phone and it was working fine until i installed layers manager from playstore and applied new layers and instantly after restarting the phone was struck on bootloop .. So after searching a bit i managed to open the phone in fastboot mode .
after then i did a factory reset and restarted the phone but the problem of bootloop was still there .. so after searching more i decided to install a custom rom, for that i first used adb tools to flash a twrp recovery in fastboot mode and when i try to enter in recovery mode the phone restarts and enters the fastboot screen itself not on recovery screen. So for me there is not way to enter in recovery mode . So someone please help me and repair my phone i will be very grateful.
Yea you can only install layers for roms that support them. stock doesn't support it. is your bootloader unlocked? if not first do then that try flashing a recovery again.
I have bricked my phone while unrooting for ota update now i cant enter to recovery mode while trying to enter recovery phone restart and struck in asus logo pls help
cruizepramod said:
I have bricked my phone while unrooting for ota update now i cant enter to recovery mode while trying to enter recovery phone restart and struck in asus logo pls help
Click to expand...
Click to collapse
I think this is what you are looking for...
http://forum.xda-developers.com/zenfone2/general/guide-recover-fastboot-bricked-zenfone-t3284337
cheers
col
Thnks bro
Hello i have a nextbook ares 8 i want to unbrick it because android crashed and i can go only at fastboot ... at the recovery i cant go either because it said acces denied i flashed twrp_recovery any help ? Thanks a lot
Hello, as the title says, after 2 years without problems my lg got in the famous bootloop. I can access the download mode sometimes, sometimes it just start 9008 mode. I tried flashing recovery tot via lgup it flashed without problems but nothing changed if i try to flash full kdz file it stops on sending image, the phone just restart the download mode.. i tried the sd card method but it doesn't work too..
Btw my bootloader is unlocked. Any ideas? Thanks for help
Boris31 said:
Hello, as the title says, after 2 years without problems my lg got in the famous bootloop. I can access the download mode sometimes, sometimes it just start 9008 mode. I tried flashing recovery tot via lgup it flashed without problems but nothing changed if i try to flash full kdz file it stops on sending image, the phone just restart the download mode.. i tried the sd card method but it doesn't work too..
Btw my bootloader is unlocked. Any ideas? Thanks for help
Click to expand...
Click to collapse
Flash the bootloop fix of u can i dont own tht 815 so i dont know exactly where it is here but its here it disables all the cores but one. Then u mnully turn on the other 3 small cores
TheMadScientist420 said:
Flash the bootloop fix of u can i dont own tht 815 so i dont know exactly where it is here but its here it disables all the cores but one. Then u mnully turn on the other 3 small cores
Click to expand...
Click to collapse
Tried that, now im not able to get boot animation either, just the qbulk 9008 now :/
Boris31 said:
Tried that, now im not able to get boot animation either, just the qbulk 9008 now :/
Click to expand...
Click to collapse
If the fix dont work either new motherboard. Try lg waranty service. Or a new decice
Hello Team
i did mistake, i downgrade phone by octuplus box and now stuck here,
your device is corrupt. it cannot be trusted
and will not boot/
phone not going in download mode,
only when try with vol+ to enter in download mode, its show download mode screen for 1sec and then back to this error, please tell me how to solve out this problem.
by Jtag this device not supported yet Because of new UFS IC.
Best Regards
Arslan
Try flash Zv8 with LG Up 1.11
If you have error , try another PC
Stuck on Same issue
Arslan1988 said:
Hello Team
i did mistake, i downgrade phone by octuplus box and now stuck here,
your device is corrupt. it cannot be trusted
and will not boot/
phone not going in download mode,
only when try with vol+ to enter in download mode, its show download mode screen for 1sec and then back to this error, please tell me how to solve out this problem.
by Jtag this device not supported yet Because of new UFS IC.
Best Regards
Arslan
Click to expand...
Click to collapse
Have you got Any Fix yet ? because i also did the same with my ls992 now my phone is not going in download mode its just showing you device is crupt with this link ((g.co/ABH)), it will fix when we get the ota update latest version of nougat, and i am searching for tha Ota file of OBV if any one tell where can i find the ota file that can flash with stock recovery otherwise my device will stay dead
Hello,
I got the LG G4 H810 (H81010o AT&T) and I tried to flash it whit a rom but somthing goes wrong.
Now when I boot my phone I got directly the message blew and even the LG Logo don't appear.
[700]--------------------------------------------------------
[750]
[800] Secure booting Error!
[850] Error Code : 1006
[900] OFFICIAL !!
[950]
[1000]--------------------------------------------------------
I manage to install TWRP but i can't install a rom or I don't know how.
Can someone please help me ?
Thank you very much,
imider
imider said:
Hello,
I got the LG G4 H810 (H81010o AT&T) and I tried to flash it whit a rom but somthing goes wrong.
Now when I boot my phone I got directly the message blew and even the LG Logo don't appear.
[700]--------------------------------------------------------
[750]
[800] Secure booting Error!
[850] Error Code : 1006
[900] OFFICIAL !!
[950]
[1000]--------------------------------------------------------
I manage to install TWRP but i can't install a rom or I don't know how.
Can someone please help me ?
Thank you very much,
imider
Click to expand...
Click to collapse
these devices have locked bootloaders. how did u install twrp?
best bet would to be to find what ever firmware device was on and reflash it with lg up or flash tool if u still have download mode.
Thanks for your reply.
I really don't know what i did to install twrp.
I try to use flash tool but doesn't detect my phone.
imider said:
Thanks for your reply.
I really don't know what i did to install twrp.
I try to use flash tool but doesn't detect my phone.
Click to expand...
Click to collapse
With flash tool goto device manager on pc.
click ports and com get into settings on it and change com port to 41
and have device in download mode powered off volume up + insert usb cord from pc
@imider I have the same problem trying to recover from a hardbrick on H815. Tell me what happens if you pull battery, plug bag, hold VOL DOWN and insert USB. Do you get fastboot?
EDIT: You might be able to flash it in FlashTool (I said no before) because I see you have Official Status not MODIFIED.
Thanks for your reply guys.
I manage to flash it with LGUP with a TOT that I downloaded.
Thanks.
:good::good::good::good::good::good:
imider said:
Thanks for your reply guys.
I manage to flash it with LGUP with a TOT that I downloaded.
Thanks.
:good::good::good::good::good::good:
Click to expand...
Click to collapse
Congrat @imider ,
maybe you can share what you did to fix your G4
Hello,
First I wanted to flash a clean rom on LG G4 H810 and I don't know what I did but the flash doesn't work and my phone has a black screen even the logo is not displayed.
When I connect my phone to my PC (windows 10) it's detected as "Qualcomm HS-USB QDLoader 9008".
Now this is the step that I follow to repair my phone :
1) I follow this tuto : https://forum.xda-developers.com/g4/help/lg-g4-bricked-qualcomm-hs-usb-qdloader-t3609999
2) After that I can enter download mode
3) I flashed a tot with LGUP
I hope it will help.
lg g4
Hi. I have lg g4 h81010o android 5.1. I put custom firmware and decided to fix build.prop. after that it at me didn't turn on. and I accidentally flashed it with another firmware.through qfil I restored the com port..but the LGUP program doesn't define my model..driver changed and LGUP version does not help. I think it's because I changed in build.prop..please help me find a solution