CyanogenMod is a free, community built distribution of Android which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I'm not associated with Cyanogenmod at all and most definitely not on their paylist. Just a hobbyist.
Download:
http://download.cyanogenmod.org/?device=trltexx
How to Install
* For 910F: Use TWRP for trltexx: http://www.techerrata.com/browse/twrp2/trltexx
* For 910G: Use TRWPR for trltedt: http://www.techerrata.com/browse/twrp2/trltedt
(I suggest to download the .img and flash that recovery image with the tool 'flashify' )
After that, flash the Gapps of your choice BUT MAKE SURE THEY ARE LOLLIPOP GAPPS !! And make sure the version is compatible with the Android version of the ROM (current version: Android 5.1.1)
If you come from Touchwiz, make sure to do a factory reset and wipe Dalvik cache.
The ROM is rooted already ! You just need to enable it, which can be done in the developer options. If you don't know how to see developer options: http://www.greenbot.com/article/245...-options-on-your-android-phone-or-tablet.html
Again, this is very important: it is rooted already DO NOT ROOT IT YOURSELF !!! If you re-root the ROM with for example chainfire, you can expect all kinds of issue's and problems.
Changelog:
http://www.cmxlog.com/12.1/trltexx/
FAQ:
Q: Help I can't install it, my recovery says "this is for trltexx but you are on trlte".
A: Use the correct recovery like pointed out above
Q: Do I need to factory reset/wipe everything when I flash a new nightly ?
A: If you were previously on CM12 I think you should be fine. However I suggest to always wipe cache and dalvik cache, if you only wipe the cache you ensure the system is not using old
stuff. If you however are experiencing problems that no one else seems to experience, a full factory reset might be an idea.
Q: Should I flash gapps every time I flash a new nightly ?
A: No, only the first time you need to flash gapps.
Q: Does this work for 910C, 910U, 910T or whatever other variant ?
A: No. This ROM is only for 910F and 910G. Some other Snapdragons like the 910T have a ROM out, but check those forums. Exynos users like 910C are still out of luck although someone is working on a very early alpha ROM for it: http://forum.xda-developers.com/note-4/orig-development/n910c-cyanogenmod-12-sources-t3015717
Q: I want a cooler device (or more performance).
A: You can lower the throttle temp (cooler device) or increase it (more performance) with for example Faux clock or with this free app: https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor
Q: Help my phone wont go into deepsleep.
A: This could be anything. To find out what's keeping your phone awake I wrote this small tutorial: http://forum.xda-developers.com/showpost.php?p=59378043&postcount=330
Q: My phone sleeps well but still is draining too much battery
A: In your wifi settings in the top right corner you can pull down a menu. Click advanced and mare sure you have 'scanning always available' disabled. And then there are the usual things like in settings/accounts disable syncing for your accounts, don't enable any hardware features you don't use etc.
Q: Can I use a custom kernel with CM12 ?
A: Some might work. However we optimize things in the CM12 kernel specifically for CM12, so flashing a custom kernel might cause problems. So if you are on a custom kernel and reporting a problem with CM12, at least ALWAYS report that you've flashed a custom kernel when posting about some problem you are experiencing !
Q: Does the S-pen work ?
A: Yes, the S-pen works right out of the box on Cm12, including hovering. If you're a heavy s-pen user and want functionality like for example making a cropped screenshot (just like in Touchwiz) you can enable that with a 3rd party app like: http://forum.xda-developers.com/android/software/app-app-samsung-devices-provided-stylus-t3000448
Q: Can I control display parameters like Contrast and Saturation ?
A: Yes our kernel supports this app to do that: http://downloads.codefi.re/savoca/kcal/re.codefi.savoca.kcal-v1.2.apk
Q: Can I set change the display modes, like in Touchwiz ?
A: Yes I wrote an app for that, MDNIE tuner: https://mega.co.nz/#!uFwCAT7Z!qFzF9_2ZsJ-pHCNq8VLAD1PIiEFD9sKtLtWrazdQt5I
Q: How can I do 60/120 hz video recording ?
A: http://forum.xda-developers.com/showpost.php?p=61059360&postcount=2285
Q: What bootloader and/or modem should I be on ?
A: For 910F:Since the kernel is currently based on BOB4, I'd suggest to have both the bootloader and modem BOB4 too. You can download flashable odin files for those 2 here:
modem: https://www.androidfilehost.com/?w=files&flid=26347
bootloader: https://www.androidfilehost.com/?w=files&flid=26346
For 910G: Dont know exactly, probably a bootloader from december would be best.
*Known issue's:
* Google camera sometimes doenst close correctly on CM12-1 and then will yield a 'cant connect to camera', I'd suggest not to use Google camera. All other cam apps work fine.
* LTE can lose connection in some countries (Finland ?)
CM12 Known issue's (not specific to the note 4)
* Ringtones only work from internal SD card (not external sd card)
* Hardware encryption not functionally
* Fingerprint sensor not integrated just yet.
A special thank you to @slayher and @fattire, who not only were the pioneers for CM12 on the Note 4 but also helped me out countless times with problems I've ran into, both with the code and with GIT. Without their work and help we would be nowhere.
Enjoy !
XDA:DevDB Information
Official Cm12 for 910F and 910G, ROM for the Samsung Galaxy Note 4
Contributors
gekkehenkie11, Slayher, Fattire
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Nightly
Created 2015-03-05
Last Updated 2015-03-05
reserved
Yeah !
Thank you bro !
Thanks so much gekkehenkie! After all your hard work we are finally on official nightlies
Thanks!
So here we go on with official nightly's @gekkehenkie11. You made it possible to keep this phone longer than 2 months. That's almost a new record for me. So I did settle. And on cm. But with a better camera. Congratulations.
dankje henk, thanks a lot henk ! this made the note so much faster !!!
ps: dont forget about the theme's issue
Official... Finally, congrats gekkehenkie11
Finally Offical nighlies! Thanks Gekke and everyone who helped to develop this amazing rom!
Awesome!
background data problem
Hey guys theres a problem with background data, it seems to be restricted but when I go into settings it isnt, this is causing problems with downloading and social media, anyone any ideas?
Hello , I am on a N910G and want to try this ROM
What is this install script and How to edit it ?
Thank you
Planet X said:
So here we go on with official nightly's @gekkehenkie11. You made it possible to keep this phone longer than 2 months. That's almost a new record for me. So I did settle. And on cm. But with a better camera. Congratulations.
Click to expand...
Click to collapse
I almost did the same if it weren't for this development thread. Awesome work yo!
@gekkehenkie11, congrats on the release
ForceField said:
Hello , I am on a N910G and want to try this ROM
What is this install script and How to edit it ?
Thank you
Click to expand...
Click to collapse
Never Mind , Found it
Working perfectly on N910G :good:
Still have to play with it
Nice one gekkenhekie you deserved this thread the amount of Man hours you've put it. Flashing this bad boy now, cheers mate
Since gekkehenkie11 is not accepting any donations I would like to thank you very much for your awesome and hard work.
My post doesn't add anything to this thread but I just wanted to say thanks.
Tried to flash but got an error within TWRP, running a 910F.
Performed a full wipe, installed from internal memory, have just installed another CM based rom and all is well ?
Could be a bad download, i'll re-attempt, am I right in thinking that the first line doesn't need to be edited if you're running a 910F ?
Cheers.
ForceField said:
Never Mind , Found it
Working perfectly on N910G :good:
Still have to play with it
Click to expand...
Click to collapse
Where is it?
How can I add options at the bottom in shoutdown menu? I mean buttons normal-vibrate-silent
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a preview build of CyanogenMod 10.2
Sauce: https://github.com/CyanogenMod
Downloads
Firmware: http://get.cm/?device=p1 (Grab the builds that start with "cm-10.2-")
Google Apps: 1 (Make sure you grab the correct version, for CyanogenMod 10.2 / Android 4.3.0)
Installation
Note: this firmware uses the same partition layout as CyanogenMod 10.1 nightly builds.
Do a Nandroid Backup!
Install the firmware using ClockworkMod Recovery
Optionally install the Google Addon
Known Issues
Bootanimation looks weird for the first few seconds.
Still image capture from the front camera doesn't work.
Change Log
20130814
Initial release
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Use these commands to get a logcat and dmesg
Code:
adb root
adb logcat > logcat.txt (wait for a few seconds then press Ctrl + C)
adb shell dmesg > dmesg.txt
Credits
humberos, sbradymobile, jt1134, pawitp and everyone else involved in coding and debugging.
Works perfectly so far. Everything works. Battery backup is good too. The option to disable hardware keys is missing I guess but that's alright. Thanks for your hard work.
Sent from my GT-P1000 using Tapatalk 4
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Nicklag said:
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Click to expand...
Click to collapse
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Thank you, Desai!!! It looks decent! You are the great coder.
When push the power button, the screen always switches to landscape from portrait (or
vice versa) before it goes off. And lockscreen is always portrait.
Yue_Iohikzu said:
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Click to expand...
Click to collapse
P1000, P1000L and P1000N - the C version is a different beast.
Mjoelnir77 said:
P1000, P1000L and P1000N - the C version is a different beast.
Click to expand...
Click to collapse
I just verified, indeed it is a device for a different region.
Thank for the heads up.
Most likely the only requirements are the drivers for the region specific hardware, besides that it should be the same.
Hi!
First of all, thanks for this great new rom. Its feel like faster than 10.1 (maybe because of the factory reset)
My only problem i cant take PicSphere photos with Focal. The logcat is attached.
Thanks again!
As far as I know Focal is still in a very early stage. It has bugs on every 10.2 rom.
Sent from my GT-P1000 using xda app-developers app
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Go to Setting -> About tablet -> Click 7 times on Build Number to enable developer options, then set Root access there...
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Try to flash superSU 1.5.1
send from my Nexus
Installed this in my P1000. Working fine. Flashed this over 4.2.2 by alroger's and then flashed gapps for 4.3. Awesome. Thanks for the developer.
Sent from my GT-P1000 using xda premium
I can't connect to home WiFi network, even after several attempts it still reports only:
The problem with the verification
Thanks in advance for any help
Wiped Dalvik and formatted cache and system and then installed that directly over the Alroger from 10th of August with the march gapps (there are newer ones - loading them now). Everything works and no bugs so far (only missing the tweaks from the alroger rom).
You only get root after becoming a delevoper like described above. But it works then without any third party stuff or any problems.
Wow! Just installed this to test for the weekend, but I don't think I have to go back I also flashed over alrogers last build (full wipe), and it's working very stable ever since. What is experimental about it?
Just one question, what governor and scheduler do you prefer cdesai (or others)? Is the standard on demand and row advisable, because it's pre-configured like that, or is that a misunderstanding?
TRIM Support?
Hi, Thanks for this. Does anyone know if TRIM Support is enabled in this version? Does it help out?
Thanks.
why not p1c?looking forward.....
polycentric said:
why not p1c?looking forward.....
Click to expand...
Click to collapse
+1 , If I'm not interested in connecting it to the Sprint CDMA network and only use it as a WiFi tablet is it OK to use the GSM ROM anyway if i only use the wifi? I always wondered that.
If by "bootup screen looks weird for a few seconds" you mean that the Cyanogenmod logo is stretched horizontally and you can only see the word "Cyanogen", I've been having that since I first flashed CM10, even the stable builds.
As for the ROM itself, it's nice and fast, but battery life is a *****. I know it'll get better, of course, so I'll just stick with this.
Code:
*** Disclaimer by cdesai
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
Here goes my CM10.2 contribution to the good old Galaxy Tab 7". This is the ROM that I'm using and sharing with yout guys. It's based on the CyanogenMod ROM, with sgt7 repo goodies, sbradymobile's Trebuchet and Settings, OpenPDroid Patches to enable the use of the PDroid Manager Privacy App and hopefully humberos' kernel and TWRP Touch Recovery.
SGT7 Tabs - P1000, P1000N/L
CDMA - sorry, no prospect for now. Anyone able to help out there?
Click to expand...
Click to collapse
Features
Works: Everything except frontal pictures?
Click to expand...
Click to collapse
Installation instructions
Regular flash through CwM or TWRP Recovery:
Backup everything up!
Wipe/Factory Reset
Flash CM10.2 ROM.
Flash PDroid Patches (optional).
Flash GApps (optional).
Reboot.
Click to expand...
Click to collapse
Changelog
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
[20131103 ROM] My first good one. working good for me!
CwM Recovery, CM kernel, OpenPDroid optional ZIP...
Click to expand...
Click to collapse
Downloads
ROM, PDroid Patchs, separate kernel ZIPs, etc...
Alroger's Cafe-TI Download Page
Sources
https://github.com/CyanogenMod
https://github.com/sgt7
https://github.com/storm31
https://github.com/humberos
FAQ
The FAQ section in a thread is bound to grow over time... check for updates.
Q: How do I flash?
A: Learn that before coming here.
Q: How do I restore my {fill in here} ROM?
A: Learn that before coming here.
Q: How do I use ODIN?
A: Learn that before coming here.
Q: How do I use Heimdall?
A: Learn that before coming here.
Click to expand...
Click to collapse
Links and References
PDroid Manager Security App in the Play Store.
GApps (use the correct one, for Android 4.3.x / CM10.2.x only!)
storm31's experimental thread.
Click to expand...
Click to collapse
Troubleshooting
Mobile, Data, 3G problems? This ROM comes with the JPZ modem. You might need to flash your customary modem back. Just copy your modem.bin to /radio in the Tab.
Wrong MAC? Wrong IMEI? Try restoring files from /sdcard/backup/efs*/* to /efs/. If you don’t have a backup, then start over with FULL Restock, and next time save your backup/efs folders, which are created everytime you install CM10.1.
Market problems? Clear Google Services Framework data and reboot.
Multiple users is NOT supported by the OpenPDroid Patches.
Developer options: can’t find it? It’s hidden! Tap About tablet / Build number 7 times to unlock it.
No touch? That means you got the wrong kernel installed. A couple of builds had problems identifying the exact model. Just flash your kernel through recovery or heimdall / odin.
No boot? Stuck at the SAMSUNG logo? Flash the correct kernel using Download Mode using heimdall!
Deep Sleep not kicking in? Try wiping cLock’s data or freezing / removing it (com.cyanogenmod.lockclock).
Click to expand...
Click to collapse
Thanks To/Credits
* humberos
* cdesai
* sbradymobile
* storm31
everyone involved! CyanogenMod peeps, TWRP peeps, Linux peeps, OpenSource peeps, Android peeps, XDA peeps...
Dev-Host Downloads and Ads
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float around and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I've never even noticed that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
reserve 3
I've got a cdma gtab and the resources to put up a build environment for it. I suck as a developer though, but would love 10.2 on my old tab so I'll take a crack at it if I can bug ppl here for help.
UPDATE 20131104 - kernel humberos v1.52
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
Thanks @storm31 for your repo / manifest!
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
papatzis said:
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
Click to expand...
Click to collapse
No, can't keep your configs between major CM versions... you can try, but usually ends up in bad results. I recomend factory reset / wipe and restore your apps and data using something like Titanium Backup, but NOT the system settings.
Yeah, gapps seems to be having temporary problems right now... how about this temp link for you guys in UbuntuOne: gapps-jb-20130813-signed.zip
subscribed
Sent from my GT-I9500
Hi
I just installed the rom and thank you very much it's better than official cm 10.1 for me
But also I found some more issues
- boot logo is still weird on startup
- seLinux does not enable, just freeze when click ok
- unable to reset data with sdcard erase, just rebooting and system is the same. clean data from cwm works ok
regards
Unable to setup restricted account. Crash when press setup icon from main user account
Sent from my GT-P1000 using XDA Premium 4 mobile app
"dirty" flashed (wipe of system, boot, cache and dalvik only) coming from storm31's 20th release and no apparent problems so far
Back camera does not suitable for videoconferencing. Got a lot garbage in preview overlay in Trueconf videoconferencing software. Front camera preview works ok, never got this bug in stock
---------- Post added at 06:48 PM ---------- Previous post was at 06:43 PM ----------
The same result in HighSpeed Cam+ preview works only for 1024x600 and 800x600 other settings are garbage
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Dmaxx67 said:
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Click to expand...
Click to collapse
All my build tips in the CM10.1 thread. Not even a manifest to build cdma in cm10.2, or I would have shared. Feel free to test cm10.1 kernels with this ROM and share the results!
Thanks alroger for this. Will test it out soon :thumbup:
Sent from my GT-I9505G using Tapatalk 4
Firstly big thank alroger cdesai humberos koxudaxi et all, this build 20131104 has 487mb only, but on normal usage always available >100mb, hence response reactipon is really great. OC 1.4Ghz also stable, unlike 4.2 only manages 1.2Ghz.
Ok, possible bug report, bluetooth headset doesn't seem to be working with skype and oovoo, how to get logcat again! Thanks.
Can't detect headset device unless turn on DUT first then start BT in android. Inconclusive bcos only tried 1 DUT.
Sent from my GT-P1000 using xda app-developers app
Hi!
Thanks Alroger for keeping delivering to our old tabs
Came from Alrogers 4.2.2 date 10 aug.
Wiped and flashed.
Everything works great, also both cameras.
Only fc on browser so using chrome, and message app missing so im using Handcent.
Sent from my GT-P1000 using Tapatalk 2
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
goughymachine said:
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
Click to expand...
Click to collapse
Video playback is smooth for me so far on this ROM
Sent from my GT-I9505G using Tapatalk 4
alroger said:
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I never even knew that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
Click to expand...
Click to collapse
Quoting post #2. Check the image attached there.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Broken Features / Known Issues
VIDEO ENCODER/DECODER ISSUES: This results in green lines on videos/pictures taken using the Intel HW encoder/decoder and other playback issues dependent on video formats. See the list below:
Snapchat: thin greeen line tends to appear on recorded videos for snapchat
Asus Pixelmaster Camera App: Super resolution mode does not work. Turning off "Optimizations" from settings clears up any green line issues.
Some video formats do not play as expected
FM Radio is unsupported.
audio is a little weird in Real Racing 3.
sim 2 cannot be disabled (this is true for all CM builds on non qualcomm hardware)
Other than Fugu (Nexus Player TV box) there are no Vendor released M x86/x86_64 builds in existance. You may experience some issues with GAPPS and some known apps not loading or working correctly. Below is a list of KNOWN apps that do not currently run on CM13 based x86 Zenfone 2 builds :
Ingress, Polaris Office, Chase Mobile, Showbox...
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
As the Zenfone2 has multiple models from multiple countries please include the following information in your report:
model #
CPU Speed / RAM Size
device state when errors occur (BT/wifi/nfc on ? On a call ? sitting idle on shelf ? )
method to reproduce if you've found something consistent
Download Links
CyanogenMod for Z00A/ ze551ml: ROM @ http://get.cm/?device=Z00A
CyanogenMod for Z008/ ze550ml: ROM @ http://get.cm/?device=Z008
Recovery Links
Z00A
Official TWRP: TWRP.ME
Z008
Official TWRP: TWRP.ME
Google apps addon:
Recommend GAPPS for now as the updated x86 gapps. Our resident x86 GAPPS guru @deadman96385 has been working with the opengapps crew to keep these current for us.
Flashable Modem updates:
Currently only supported in jrior001's unofficial TWRP
May or may not work in others
** see this post for more info **
Intel stores some modem firmware in the OTA's in a file labeled "ifwi.zip"
These are flashable zips to receive the updated firmware while staying on custom ROMS
**THIS IS A ONE WAY PROCEDURE, JUST LIKE THE OTA's THERE IS NO KNOWN WAY
TO FLASH BACK TO EARLIER MODEM FIRMWARE, PROCEED WITH CAUTION**
IF you still wish to proceed, current flashable ifwi zips are available HERE for Z00A AND Z008
FOR INFO ON MM BOOTLOADER BASED BUILDS SEE THIS POST
XDA:DevDB Information
CyanogenMod 13.0 Nightly Bulids (Z00A/Z008), ROM for the Asus ZenFone 2
Contributors
jrior001, crpalmer
Source Code: https://github.com/CyanogenMod/android_kernel_asus_moorefield
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 2.20.40.16x stock base
Version Information
Status: Nightly
Created 2015-12-05
Last Updated 2016-09-07
Reserved
FAQ
Does Official TWRP work?
* Yep
* Unified recovery builds as of TWRP 3.0.0-0, same build for both Z00A/Z008
Can I use a custom kernel with these builds?
* At your own risk, don't complain here if something gets broken in the process
*Also, doing so makes any feedback useless to us because the kernel and the ROM are a complete package and changing part of that means you may have broken something beyond our control.
Will this be an Official ROM?
* When all the show stopping bugs are fixed and all the upstream commits are merged, yes.
* Until then, no because CyanogenMod has very high standards for accepting new devices.
* As of 3/17/16 we now have official builds
Do I need to unlock the bootloader?
* Yes.
Upgrade from CM-12.1 ?
* Tools have been put in place to make upgrading from 12.1 nightlies smooth however backups are always recommended. Make a backup and attempt upgrade from 12.1 -> 13.0. Make sure to Flash 6.0 gapps at the same time. 6.0 only applies the proper permissions for system apps on first boot.
* If the above fails to load smoothly, restore your backup, take the necessary backups of apps and such and make a clean flash upgrade instead.
EXTERNAL SDCARD in M
* There were major changes in AOSP in the handling of storage.
* Two options :
(1) used as external storage. Removable, plug and play storage like we all know and love.
(2) used as Adoptable storage. non removable, Sdcard becomes an extenstion of your /data partition. Removing Sdcard will cause signifigant data loss.
* On first boot you are presented with the option to choose how to handle your sdcard. CHOOSE WISELY
* read more about this feature in this article from android central
Green lines on Pixelmaster camera/Snapchat
* In the Asus camera app disable "Optimizations", this should clear green lines/distorted pictures here.
* In Snapchat, issue is far less intrusive and there is no workaround.
FM Radio
* Currently this is unsuported. As of yet we have not managed to figure out how Asus made this feature work. Should we figure that out We'd love to support it but until then it is not a high priority issue to resolve. ** UPDATED** I found some source code for the FM radio implementation but it's clearly marked as proprietary and unuseble by us at this time.
Call Recording
Native Call Recording is a feature that while only legal in some countries, has become very popular on CM.
Currently we do not have full audio HAL source for Intel devices and have no way to implement this in CM for this device.
C-APPS
They're are currently no C-APPS packages for CM-13. Due to the way M handles system app permissions this is not likely to be available at any time in CM13.
I'd like to make a donation
Support of this project is a joint effort between @crpalmer and @jrior001. Many users like to show support via Donations. If you feel so inclined to support us in this manner you can do so HERE(jrior001) and HERE(crpalmer). Donations are by no means expected, but always appreciated.
Reserved
Wow.. AWESOMEE.. Thanks Guyzz
Full wipe required when coming from 12.1?
Awesome!!! But... Must.. Resist... The urge.... Aauuggggh.
Updates issues and notes on upgrading from cm-12.1 .
RIL connectivity is not very good right now, requires manual setup on most sims. Clean install w/gapps is preferred, but CM team goes to great lengths to make sure upgrade path is smooth so a flash-able update from 12.1 nightly "should " work fine. Just make sure to flash your gapps w/ROM prior to rebooting. Flashing gapps later is not something that is going to work well for you.
jrior001 said:
Updates issues and notes on upgrading from cm-12.1 .
RIL connectivity is not very good right now, requires manual setup on most sims. Clean install w/gapps is preferred, but CM team goes to great lengths to make sure upgrade path is smooth so a flash-able update from 12.1 nightly "should " work fine. Just make sure to flash your gapps w/ROM prior to rebooting. Flashing gapps later is not something that is going to work well for you.
Click to expand...
Click to collapse
We have resolved the DRM video issue and the audio lag in games has yet to be an issue in cm-13 thus far.
I should be studying for a test, but........CM13 is coming first now
Sent from my ASUS_Z008 using XDA Free mobile app
Fantastic! Just Z00A for now?
Just finished the SAT. Came home to a welcome surprise!
troy5890 said:
I should be studying for a test, but........CM13 is coming first now
Sent from my ASUS_Z008 using XDA Free mobile app
Click to expand...
Click to collapse
550 version doesn't seem to be up yet, unfortunately.
kanagawaben said:
Fantastic! Just Z00A for now?
Click to expand...
Click to collapse
I manually ran a z00a build to test the setup. Assuming all goes well, there will be a z008 build tomorrow.
kanagawaben said:
550 version doesn't seem to be up yet, unfortunately.
Click to expand...
Click to collapse
We weren't going to do the thread till tom but somebody found the test build.... It will come, but probably not till next nightly cycle
Sent from my N5206 using Tapatalk
crpalmer said:
I manually ran a z00a build to test the setup. Assuming all goes well, there will be a z008 build tomorrow.
Click to expand...
Click to collapse
Thank you! No rush at all, of course.
---------- Post added at 11:44 PM ---------- Previous post was at 11:42 PM ----------
jrior001 said:
We weren't going to do the thread till tom but somebody found the test build.... It will come, but probably not till next nightly cycle
Sent from my N5206 using Tapatalk
Click to expand...
Click to collapse
Ditto, my comment above. Absolutely delighted it is coming, and happy to wait a bit longer. Thanks for your sterling work guys!
jrior001 said:
Updates issues and notes on upgrading from cm-12.1 .
RIL connectivity is not very good right now, requires manual setup on most sims. Clean install w/gapps is preferred, but CM team goes to great lengths to make sure upgrade path is smooth so a flash-able update from 12.1 nightly "should " work fine. Just make sure to flash your gapps w/ROM prior to rebooting. Flashing gapps later is not something that is going to work well for you.
Click to expand...
Click to collapse
yeah, i got that sim problem, but choosing manually worked, flashing this rom with open gapps worked fine
Seutp wizard has closed. Keep getting g that message. Back to 12.1.
How install super SU?
Awesome
I formatted my sdcard1 over and over... but my zen can't access it.
Any reason why?
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for official LineageOS 14.1 builds for LG G4 . The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Known bugs:
Video Recording
Installation:
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package, install the SU addon package(https://download.lineageos.org/extras, choose arm64)
Reboot
Download:
h815: https://download.lineageos.org/h815
h811: https://download.lineageos.org/h811
personnal nightlies http://host.erwanleboucher.fr/
XDA:DevDB Information
CM 14 on LG G4, ROM for the LG G4
Contributors
genesixxbf3, codeworkx
Source Code: http://github.com/CyanogenMod
ROM OS Version: 7.x Nougat
ROM Firmware Required: V20A Bootloader and modem
Version Information
Status: Beta
Created 2016-10-10
Last Updated 2018-01-28
Reserved
What's working.
everything except what's not working.
What's not working ?
encryption (who use that )
f2fs (who use that too )
QHD video recording
official = signed
unofficial = no signed
to go to unofficial to official flash experimental first (and boot it)
Reserved
If you don't have a sim card detected try that
Code:
adb root
adb shell rm /data/user_de/0/com.android.providers.telephony/databases/telephony.db
adb shell rm /data/user_de/0/com.android.providers.telephony/databases/mmssms.db
adb reboot
Nice job mate! Thank you!
Everythink work ??? no bug ? no issues ? theme engine work ?
yes i know Nougat is too Young for Stable custom Rom at this moment but hope
What doesn't work? if you dont mind me asking?
Awesome work, thanks Genesixx
If there are known issues I am sure the OP will update the first post. You can also flash it and post if you find anything, just don't forget to make a full backup first ????
How is the camera on this build?
Op says you should flash gapps 6.0, is this right?
ashensii said:
Op says you should flash gapps 6.0, is this right?
Click to expand...
Click to collapse
7.0 gapps
to see what's not workin check second post
wow excellent work!
Is this stable enough to use as a daily driver?
ceanth said:
wow excellent work!
Is this stable enough to use as a daily driver?
Click to expand...
Click to collapse
It is
Was running the 10-05 build for several days. I find it works just as good as CM13, possibly better (smoother/faster). Bugs are very minimal, features are too but overall this is a very stable and solid build so far!
THANK YOU @genesixxbf3 for bringing this to us! I don't really like CM13, but 14, something about it is very nice (coming from someone that prefers stock over aosp).
EDIT: It should be posted that H811 users need to be on 20o FW before flashing this, to make sure they get best experience (if you want sound/camera working).
EDIT2: Oh and now there is a thread for me to report: Zooming with standard gallery hot-reboots the phone.
theslam08 said:
It is
Was running the 10-05 build for several days. I find it works just as good as CM13, possibly better (smoother/faster). Bugs are very minimal, features are too but overall this is a very stable and solid build so far!
THANK YOU @genesixxbf3 for bringing this to us! I don't really like CM13, but 14, something about it is very nice (coming from someone that prefers stock over aosp).
EDIT: It should be posted that H811 users need to be on 20o FW before flashing this, to make sure they get best experience (if you want sound/camera working).
Click to expand...
Click to collapse
thanks, i might flash it tonight then. Should 815 users also be on stock rom before flashing this? I am currently on v20d stock rom
ceanth said:
thanks, i might flash it tonight then. Should 815 users also be on stock rom before flashing this? I am currently on v20d stock rom
Click to expand...
Click to collapse
Unfortunately I am not sure about the h815. With the h811 we had a recent issue where we had to be on the latest FW for it to fully work.
I would 'assume' it would be the same for you. May wish to wait for 815 users to report back which FW they're on and how it all works for them.
(and you don't have to actually be running the stock ROM before flashing this, the firmware is a once-flash-always-flashed type situation; firmware is not ROM based it stays between ROMs)
ceanth said:
thanks, i might flash it tonight then. Should 815 users also be on stock rom before flashing this? I am currently on v20d stock rom
Click to expand...
Click to collapse
v20A or newer. So you are fine. Before flashing you don't care what rom you are on. You just need to wipe system , data , cache and dalvik cache and flash whatever you like.
kessaras said:
v20A or newer. So you are fine. Before flashing you don't care what rom you are on. You just need to wipe system , data , cache and dalvik cache and flash whatever you like.
Click to expand...
Click to collapse
ok great.
I'll give it a go and report back with feedback to the group
ceanth said:
ok great.
I'll give it a go and report back with feedback to the group
Click to expand...
Click to collapse
(out of subject)
I wonder how do you live with the stock rom on G4
You charge the phone 2 times per day ? haha
The stock rom has issues and it doesn't let the phone get into doze.
Have fun flashing you will never wanna go back to stock again
kessaras said:
(out of subject)
I wonder how do you live with the stock rom on G4
You charge the phone 2 times per day ? haha
The stock rom has issues and it doesn't let the phone get into doze.
Have fun flashing you will never wanna go back to stock again
Click to expand...
Click to collapse
Haha. I flashed stock rom because I wanted to use Android Pay. There is a deal on in the UK where by you get free London Underground travel on Mondays throughout October.
I was planning on flashing something else after the offer is done but Android Pay failed to work this morning causing a massive queue behind me I have had enough of it!
ceanth said:
Haha. I flashed stock rom because I wanted to use Android Pay. There is a deal on in the UK where by you get free London Underground travel on Mondays throughout October.
I was planning on flashing something else after the offer is done but Android Pay failed to work this morning causing a massive queue behind me I have had enough of it!
Click to expand...
Click to collapse
Hmmm. I don't use android pay but I read somewhere that you can use it with cm 14 or 13 if you use an official and stable build , not nightly or unofficial , and disable superuser in developer settings.
Of course I don't know if that's true
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
More detailed instructions at:
Install LineageOS on find7
Download link:
LineageOS Downloads
Recommended Google Apps package:
Open GApps (choose the variant you want. Recommended nano package)
Official root addon
LineageOS Extras
Changelog:
Changes for find7
Bug reports:
How to submit a bug report
LineageOS JIRA
Donate to support development:
Donate via PayPal to mikeioannina
Donate via PayPal to LineageOS
XDA:DevDB Information
Official LineageOS 15.1 for Find7a/s, ROM for the Oppo Find 7
Contributors
mikeioannina
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Any version of ColorOS. Unified storage not supported.
Based On: LineageOS
Version Information
Status: Nightly
Created 2018-07-09
Last Updated 2018-11-15
Just curious. Are there any way for find 7 to install nano gapps? I keep on getting insufficient storage... Sad...
Am having problem of cold start gps. Takes about 8-10 mins before locking in. However, once lock in,everything work perfectly.
Updated on 18july.now everything is perfect. Even the battery life got better.
thank you???
luckywang95 said:
Just curious. Are there any way for find 7 to install nano gapps? I keep on getting insufficient storage... Sad...
Click to expand...
Click to collapse
You can delete the storage check in the installer script. Did it before and worked fine. I'm gonna try it tonight with this build.
Update: Stucked in bootloop. Gonna try tommorow again.
Update#2: Here is my working solution:
1. Flashing rom
2. Flashing addonsu
3. Flashing openGapps micro
Whats the perception about the Lineage<color>Accent.apks ?
They seemed to compromise my device and after removing these system aps
my find7 starts twice as fast as before.
In Settings->Apps they are all active but do nothing and their names are renamed like kakao lavendel kirsche carbon...
I'dont know whats this about,
but I feel Hacked and compromised by these apks!
Please explain what these apks are good for
and why it is stated in Settings->Apps that they do nothing else as being in background active
nor is anything protokollised from their activity!
I did a clean fresh install with these Custom Rom,
wiping all partitions and installing them with TWRP 3.2.2.0
With best regards Zoltan-X
P.S.: Find7 works better without these and no Errors are caused in usage so far!!!
Zoltan-X said:
Whats the perception about the Lineage<color>Accent.apks ?
They seemed to compromise my device and after removing these system aps
my find7 starts twice as fast as before.
In Settings->Apps they are all active but do nothing and their names are renamed like kakao lavendel kirsche carbon...
I'dont know whats this about,
but I feel Hacked and compromised by these apks!
Please explain what these apks are good for
and why it is stated in Settings->Apps that they do nothing else as being in background active
nor is anything protokollised from their activity!
I did a clean fresh install with these Custom Rom,
wiping all partitions and installing them with TWRP 3.2.2.0
With best regards Zoltan-X
P.S.: Find7 works better without these and no Errors are caused in usage so far!!!
Click to expand...
Click to collapse
Are you serious? These are just simple apks for the styles you can change from display settings.
If you are so curious about "being hacked" look at the source: https://github.com/LineageOS/android_packages_overlays_Lineage
Curios i've had in those app a data collecting folder structure,
like db, files, and more, maybe a rootkit on my device???
I don't know, since i removed those my find7 works again really well,
what it didn't do since a long time in this year....
With best regards
Code looks fine and i'll recheck if the image was compromised or not or how, but later these days.
thank you for the quick hint to those files!
P.S.: I've dirty reflashed the image i used to install lineageOS, after the expected remove, and no these nightly seems not been compromised,
Sorry for the alert,
but in the last days many hacks occured in my private relationships with my dearest, so I was a little curios, but seems now clean on my device!
Thank You verry much,
and Kudos Kudos Kudos to your quick hint reply.
I just installed lineage-15.1-20180806-nightly-find7-signed.zip to replace my stock Oppo Find7 firmware on the weekend and after a few days with it, so far so good! I had to lose the LVM unfortunately, but I'd rather have an up to date OS.
The battery life seems shorter than the stock firmware. I can still get through the day, but down to 40 or 50% or less by 6PM instead of much more with the stock Oppo FW. I haven't tried tweaking any battery life settings yet though.
Two minor things with the install compared to the LineageOS howto - the SD card path was different to what was documented ( /internal_sd not /sdcard) , and I had to install open_gapps-arm-8.1-pico-20180812.zip (pico instead of the documented nano version)... but this was minor stuff and I got where I wanted to go.
Awesome. Thanks for this release. Everything (almost) works great. Feels like a new phone. Only video recording does not work. Any ideas ?
hexplor said:
Awesome. Thanks for this release. Everything (almost) works great. Feels like a new phone. Only video recording does not work. Any ideas ?
Click to expand...
Click to collapse
Video recording is now working on latest AOKP Rom for Find 7. Google is your friend.
knusto said:
Video recording is now working on latest AOKP Rom for Find 7. Google is your friend.
Click to expand...
Click to collapse
Wooot ! They have nougat builds for find 7
hexplor said:
Awesome. Thanks for this release. Everything (almost) works great. Feels like a new phone. Only video recording does not work. Any ideas ?
Click to expand...
Click to collapse
It will be fixed in next build.
mikeioannina said:
It will be fixed in next build.
Click to expand...
Click to collapse
Thank you so much. Can't wait
hexplor said:
Wooot ! They have nougat builds for find 7
Click to expand...
Click to collapse
AOKP is now on Oreo for Find 7
mikeioannina said:
It will be fixed in next build.
Click to expand...
Click to collapse
Got the latest build. All fine Thanks
Allthough its not supported i've got unified working. not reliable tho. the only way i got it working when flashing los and direct rebooting into recovery again and then flashing the cm-13.0-find7-unified-storage-patch.zip from the according thread. cuz the original link is dead incl mirror i got my copy uploaded to gdrive here. https://drive.google.com/file/d/1sZ72qUD5P7qL4tsIF3MB-cQk9x9pamRR/view?usp=sharing
only drawback being you cant reboot anymore cuz that will somehow give you the your-sdcard-is-****ed message. havent found a reasonable routine so i guess you'll have to try your luck yourself and maybe give feedback?
Hi, could you disable CABC(Content Adaptive Brightness Control) or provide a way to disable it? The hardware of Find 7 use it and it really makes some troubles, brightness, color. Really thanks if you have that time
I read that the problem of heavy games crashing on Bacon (Oneplus One) was resolved recently with this commit https://review.lineageos.org/#/c/LineageOS/android_device_oneplus_bacon/+/218799/
I have the same problem with the Oppo Find 7/s (i.e. heavy games are crashing). As this device has the same processor and RAM as that of the Bacon, is it possible to get the same fix for Find 7 as well?
Manas1796 said:
I read that the problem of heavy games crashing on Bacon (Oneplus One) was resolved recently with this commit https://review.lineageos.org/#/c/LineageOS/android_device_oneplus_bacon/+/218799/
I have the same problem with the Oppo Find 7/s (i.e. heavy games are crashing). As this device has the same processor and RAM as that of the Bacon, is it possible to get the same fix for Find 7 as well?
Click to expand...
Click to collapse
That commit has already been applied for Find7 - https://github.com/LineageOS/androi...mmit/80e1e7e5ffca2c69730eecc8c498423c2ea48463