Related
Guys,
I used to be very good at rooting by in my HTC days (3 yrs ago). Not so much now a days :crying: I need some help.
I have the ATT LG G3 D850 (i believe) (16gb)
I rooted my phone a few months back. It was an app that did it quite easily for me. I downloaded and used root only apps like titanium back up with no problems.
I didn't download TWRP because at the time i don't believe it was available.
Anyways fast forward a few months and with lollipop out i thought i'd try to install TWRP and a rom that had android 5.0
I downloaded the TWRP app and then installed TWRP recovery through the app. (i listed my phone as D851 because i couldn't find D850 on the list)
Everything seemed to run fine and got a notification that the install was done successfully.
I tried to boot into recovery through the TWRP app and my phone did not boot! I get a message at the upper left corner of my phone that says:
: Boot Certification Verify
______________________________
Secure booting Error!
Cause : Boot Certification Verify
______________________________
and then my phone turns off.
What the hell did i do to my beautiful LG G3? Can someone help me fix this?
I greatly appreciate the help! This forum has always been so awesome!
You will probably have to reflash the KDZ - never choose a phone model unless its your actual device
Vivasanti said:
You will probably have to reflash the KDZ - never choose a phone model unless its your actual device
Click to expand...
Click to collapse
Can you help Explain how I do this? What is KDZ?
You must check what exactly model you have. Then download a firmware in KDZ format and flash it through LG Flash Tool. Can't give you more details, because I never used that way of flashing new firmware
You flashed TWRP for the T-Mobile variant that ships with an unlocked bootloader, however your variant has a locked boot loader hence the boot Sig error. You need to flash back to stock with kdz and then flash bumped TWRP which works around the locked bootloader and allows you to flash Roms and kernals. You can download "bumped" TWRP here: http://downloads.codefi.re/thecubed/lg_g3/bump/, and here is the thread: http://forum.xda-developers.com/lg-g3/orig-development/bump-unlock-lg-g3-twrp-d852-d852g-f400-t2900614
---------- Post added at 02:12 PM ---------- Previous post was at 02:02 PM ----------
This page is always helpful for finding packages, they would have the kdz I would think http://forum.xda-developers.com/showthread.php?t=2772658
melbing said:
You flashed TWRP for the T-Mobile variant that ships with an unlocked bootloader, however your variant has a locked boot loader hence the boot Sig error. You need to flash back to stock with kdz and then flash bumped TWRP which works around the locked bootloader and allows you to flash Roms and kernals. You can download "bumped" TWRP here: http://downloads.codefi.re/thecubed/lg_g3/bump/, and here is the thread: http://forum.xda-developers.com/lg-...mp-unlock-lg-g3-twrp-d852-d852g-f400-t2900614
---------- Post added at 02:12 PM ---------- Previous post was at 02:02 PM ----------
This page is always helpful for finding packages, they would have the kdz I would think http://forum.xda-developers.com/showthread.php?t=2772658
Click to expand...
Click to collapse
If i flash back to stock, will my phone be functional again? Or do i need to flash "bumped TWRP"
what is "bumped TWRP" ?
Your phone will be functional again if you flash back to stock afterward if you want to flash roms you need to then install bumped TWRP. Bumped TWRP is a special version of TWRP that has been patched to make it possible to use on variants of the g3 with locked bootloaders like yours, by tricking the phone into thinking it is booting stock recovery. This will allow you to flash Roms and kernals that have been "bumped" and apply mods like you would normally be able to with TWRP. Bump is basically a bootloader unlock for your phone that let's you flash roms, kernals, and Recovery's.
---------- Post added at 12:52 PM ---------- Previous post was at 12:16 PM ----------
You do not need to bumped TWRP unless you want to, you need to use the LG flash tool to reset your phone here's the link: http://forum.xda-developers.com/showthread.php?t=2797190 and check the index linked above to find the .kdz for the tool
melbing said:
Your phone will be functional again if you flash back to stock afterward if you want to flash roms you need to then install bumped TWRP. Bumped TWRP is a special version of TWRP that has been patched to make it possible to use on variants of the g3 with locked bootloaders like yours, by tricking the phone into thinking it is booting stock recovery. This will allow you to flash Roms and kernals that have been "bumped" and apply mods like you would normally be able to with TWRP. Bump is basically a bootloader unlock for your phone that let's you flash roms, kernals, and Recovery's.
---------- Post added at 12:52 PM ---------- Previous post was at 12:16 PM ----------
You do not need to bumped TWRP unless you want to, you need to use the LG flash tool to reset your phone here's the link: http://forum.xda-developers.com/showthread.php?t=2797190 and check the index linked above to find the .kdz for the tool
Click to expand...
Click to collapse
Thank you for your help. I travel a lot so i have not been able to sit down and try to fix this. I've been operating on my work phone all week. I hope to give this a shot sometime tomorrow.
Thanks again! Really appreciate the help.
melbing said:
Your phone will be functional again if you flash back to stock afterward if you want to flash roms you need to then install bumped TWRP. Bumped TWRP is a special version of TWRP that has been patched to make it possible to use on variants of the g3 with locked bootloaders like yours, by tricking the phone into thinking it is booting stock recovery. This will allow you to flash Roms and kernals that have been "bumped" and apply mods like you would normally be able to with TWRP. Bump is basically a bootloader unlock for your phone that let's you flash roms, kernals, and Recovery's.
---------- Post added at 12:52 PM ---------- Previous post was at 12:16 PM ----------
You do not need to bumped TWRP unless you want to, you need to use the LG flash tool to reset your phone here's the link: http://forum.xda-developers.com/showthread.php?t=2797190 and check the index linked above to find the .kdz for the tool
Click to expand...
Click to collapse
gosh it's going on 3-weeks without my phone. I've read through this thread http://forum.xda-developers.com/showthread.php?t=2797190
but i'm still lost. It's been so long since i rooted a phone i'm so out of touch with the jargon of today, makes me a little sad actually lol
so if i read this correctly i need to download the LG Flash Tool 2014 (can this be done on MAC?) I don't get what you mean with "and check the index linked above to find the .kdz for the tool"
i clicked on the link to the index, but what exactly am i looking for?
cyaiphone said:
gosh it's going on 3-weeks without my phone. I've read through this thread http://forum.xda-developers.com/showthread.php?t=2797190
but i'm still lost. It's been so long since i rooted a phone i'm so out of touch with the jargon of today, makes me a little sad actually lol
so if i read this correctly i need to download the LG Flash Tool 2014 (can this be done on MAC?) I don't get what you mean with "and check the index linked above to find the .kdz for the tool"
i clicked on the link to the index, but what exactly am i looking for?
Click to expand...
Click to collapse
You need to download the correct .kdz file for your variant. The .kdz is the complete stock firmware from LG. Also, if you really have an AT&T LG G3 (D850) it is a 32gb not 16gb version. If your phone only has 16gb of storage then you do not have a D850 and you need to go to your software information in the phone to verify what model you have. Do not flash anything for another variant as you see where that leads. Check back and let me know when you find out for sure which variant you have and I will point you to a specific thread for your device with step by step instructions on how to use the .kdz method to return to stock, then flash a Bump'd TWRP recovery so you can make a nandroid backup and save yourself from this mess again. I am also unsure if the .kdz restore method can be done on Mac, but I'm pretty sure it cannot be done considering the program provided is a Windows executable. Best of luck.
acparker18 said:
You need to download the correct .kdz file for your variant. The .kdz is the complete stock firmware from LG. Also, if you really have an AT&T LG G3 (D850) it is a 32gb not 16gb version. If your phone only has 16gb of storage then you do not have a D850 and you need to go to your software information in the phone to verify what model you have. Do not flash anything for another variant as you see where that leads. Check back and let me know when you find out for sure which variant you have and I will point you to a specific thread for your device with step by step instructions on how to use the .kdz method to return to stock, then flash a Bump'd TWRP recovery so you can make a nandroid backup and save yourself from this mess again. I am also unsure if the .kdz restore method can be done on Mac, but I'm pretty sure it cannot be done considering the program provided is a Windows executable. Best of luck.
Click to expand...
Click to collapse
I'm unable to get into my phone so I can't see what variant i have, but i do know that i have a 16gb on ATT.
I do have a windows laptop so i will attempt this on my laptop. Thank you so much for your help. I'll await your response.
All US Carriers for the LG G3 are 32gb models.
cyaiphone said:
I'm unable to get into my phone so I can't see what variant i have, but i do know that i have a 16gb on ATT.
I do have a windows laptop so i will attempt this on my laptop. Thank you so much for your help. I'll await your response.
Click to expand...
Click to collapse
I cannot point you in the right direction without having an exact model variant number. You obviously don't have a D850, but there are a few 16gb variants out there. I would hate to be the cause of you further bricking your phone. If you can dig through your information from the retailer you bought the phone from and give me an exact model, then I can help you without worrying about screwing you worse than you're already screwed.
---------- Post added at 11:01 AM ---------- Previous post was at 10:48 AM ----------
cyaiphone said:
I'm unable to get into my phone so I can't see what variant i have, but i do know that i have a 16gb on ATT.
I do have a windows laptop so i will attempt this on my laptop. Thank you so much for your help. I'll await your response.
Click to expand...
Click to collapse
The model number is listed on the IMEI sticker that's underneath the battery. My model says VS-985W since I have a white Verizon G3. Yours should say some model that starts with a D. This same number should also be plastered in multiple locations along the inside edge of the phone once the battery cover is removed.
acparker18 said:
I cannot point you in the right direction without having an exact model variant number. You obviously don't have a D850, but there are a few 16gb variants out there. I would hate to be the cause of you further bricking your phone. If you can dig through your information from the retailer you bought the phone from and give me an exact model, then I can help you without worrying about screwing you worse than you're already screwed.
---------- Post added at 11:01 AM ---------- Previous post was at 10:48 AM ----------
The model number is listed on the IMEI sticker that's underneath the battery. My model says VS-985W since I have a white Verizon G3. Yours should say some model that starts with a D. This same number should also be plastered in multiple locations along the inside edge of the phone once the battery cover is removed.
Click to expand...
Click to collapse
Ok, so the white sticker underneath my battery says LG-D850. There's also some D850 small white markings on the body of the phone.
The sticker on the box that my phone came in says "SW Ver D85010d"
cyaiphone said:
Ok, so the white sticker underneath my battery says LG-D850. There's also some D850 small white markings on the body of the phone.
The sticker on the box that my phone came in says "SW Ver D85010d"
Click to expand...
Click to collapse
Can you post a screenshot or two of your Storage page? The D850 is the AT&T model but they only come in a 32gb ROM / 3gb Ram storage option. All U.S. variants are of this variety and you should have access to 32gb of internal storage.
acparker18 said:
Can you post a screenshot or two of your Storage page? The D850 is the AT&T model but they only come in a 32gb ROM / 3gb Ram storage option. All U.S. variants are of this variety and you should have access to 32gb of internal storage.
Click to expand...
Click to collapse
My phone doesn't booT so I'm not sure I can get you a screen shot. Maybe I do have the 32 gb and me stating 16 gb was a mistake on my part.
cyaiphone said:
My phone doesn't booT so I'm not sure I can get you a screen shot. Maybe I do have the 32 gb and me stating 16 gb was a mistake on my part.
Click to expand...
Click to collapse
Sorry about repeatedly asking you to get information from your phone, too many different posts to keep up with!
http://forum.xda-developers.com/showthread.php?t=2785089
That link has everything you need to restore any variant back to stock. From there, you can root and Bump it if you want. Just download the KDZ from the link given in the OP of that thread. Make sure it says its for the D850 and try to find the earliest version possible if there are multiple options (eg. 10b instead of 10d if possible).
cyaiphone said:
My phone doesn't booT so I'm not sure I can get you a screen shot. Maybe I do have the 32 gb and me stating 16 gb was a mistake on my part.
Click to expand...
Click to collapse
Phone have got dowwnloadmod
If have downloadmod
Use lgflashtool flash file d850 tot 16gb
If cross [d851]to[d850]
use hex change tot
i can help you .
acparker18 said:
Sorry about repeatedly asking you to get information from your phone, too many different posts to keep up with!
http://forum.xda-developers.com/showthread.php?t=2785089
That link has everything you need to restore any variant back to stock. From there, you can root and Bump it if you want. Just download the KDZ from the link given in the OP of that thread. Make sure it says its for the D850 and try to find the earliest version possible if there are multiple options (eg. 10b instead of 10d if possible).
Click to expand...
Click to collapse
ok, here i go! I will attempt this now. It may be a looong night for me as i really don't know what i'm doing, but here it goes.
acparker18 said:
Sorry about repeatedly asking you to get information from your phone, too many different posts to keep up with!
http://forum.xda-developers.com/showthread.php?t=2785089
That link has everything you need to restore any variant back to stock. From there, you can root and Bump it if you want. Just download the KDZ from the link given in the OP of that thread. Make sure it says its for the D850 and try to find the earliest version possible if there are multiple options (eg. 10b instead of 10d if possible).
Click to expand...
Click to collapse
Ok so I clicked on the Firmware files link http://storagecow.eu/index.php?dir=X...+G3/Stock/ in the OP.
I then clicked on the very top folder which is ATT D850 folder. In that file, there's 3 different files. Do i need to download all these files?
Hey guys.
I'm desperate for some help with my LG G PAD 8.3 tablet.
All i simply want to do is put cyanogen mod ROM on the device, and I can't believe how difficult it is proving to do.
I have been all over the internet and spent around 4 days researching in to the whole process and every time I follow various online steps, guides and you tube videos i end up putting the tablet in to a software brick and then have to use the LG recovery tool to get the tablet working again. It's driving me insane!
So first of all i rooted the tablet using towel root. I then get a message saying that the device is rooted. I then download the super su app and that goes fine. I then try to get TWRP or CWM on to the device so i can back up the current running operating system and it's down hill from this point. The device reboots and comes up with:
Secure booting Error!
Cause : boot certification verify
it's happened 4 times to me now. I just can't figure out how to get this device doing what I want it to do. I see loads of videos and success stories of people having no problems getting cyanogen mod on to the LG tablet so what do i do? Is there someone that can provide a detailed step by step instruction to get this right?
i'm at the point of just giving up on it and being stuck with a poxy horrible LG stock look.
PLEASE SOMEONE HELP!
Anyone???
If I missed it in your OP, remind me, but what variant model of the 8.3? VK810.4G? V500? V510?
Sent from my VK810 4G
Sorry. Yes it's the v500 variant. I really wanted get this sorted and will appreciate everyone's help.
RHolmesy said:
Sorry. Yes it's the v500 variant. I really wanted get this sorted and will appreciate everyone's help.
Click to expand...
Click to collapse
Maybe I can help you, You can Use This App To Unlock The Bootloader and to put the recovery (TWRP ONLY) Its just need root.
This is not mine But I help him to share this to people who has having problem with bootloader and recovery
Its working both 4.2 and 4.4
LINK:https://app.box.com/LGGPADRECOVERYTWRP
Thanks. Can you tell me what I do with this app? What order do I do things when I have installed it in the tablet?
Ignore this comment - I've worked it out. Will report back with my findings. Thank you so far!
Same problem
RHolmesy said:
Thanks. Can you tell me what I do with this app? What order do I do things when I have installed it in the tablet?
Ignore this comment - I've worked it out. Will report back with my findings. Thank you so far!
Click to expand...
Click to collapse
I have the same problem for days i stack at "secure booting error
Cause:boot certification verify" with any recovery method i try(CWM,TWRP etc.)
---------- Post added at 11:22 PM ---------- Previous post was at 11:14 PM ----------
Jansxel said:
Maybe I can help you, You can Use This App To Unlock The Bootloader and to put the recovery (TWRP ONLY) Its just need root.
This is not mine But I help him to share this to people who has having problem with bootloader and recovery
Its working both 4.2 and 4.4
You are a savior!Thanks!
Click to expand...
Click to collapse
hello all, while my phone was upgrading it got stucked while upgrading and i was force to remove battery and now it is in this condition-Secure Booting Error! Cause: boot certification verify ,
i cant even flash it with flash tool.
Please any guide
unbrick your lg f460 l
the best method i think is to flash tot files.
with lg flash tool
UPSS !! said:
hello all, while my phone was upgrading it got stucked while upgrading and i was force to remove battery and now it is in this condition-Secure Booting Error! Cause: boot certification verify ,
i cant even flash it with flash tool.
Please any guide
Click to expand...
Click to collapse
Did u unbrick your 460l. My 460k is also bricked.no success uptil now
Just wait for it to finish, mine took several hours
F460k in 9008
dicecuber said:
Just wait for it to finish, mine took several hours
Click to expand...
Click to collapse
I tried to downgrde and now i hve 9008 delod mode on lg f460k
Need DeBrick.img
All you need is deBrick.img fil for that unit
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
---------- Post added at 01:50 AM ---------- Previous post was at 01:48 AM ----------
This is the unbrick hardbrick page check this out and remeber if u find this helpful remember the thanx button and dont foget to thank the orig poster for his hard work also
TheMadScientist420 said:
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
---------- Post added at 01:50 AM ---------- Previous post was at 01:48 AM ----------
This is the unbrick hardbrick page check this out and remeber if u find this helpful remember the thanx button and dont foget to thank the orig poster for his hard work also
Click to expand...
Click to collapse
This op is for g3 not for cat6. Bcz its chip is 8084
UPSS !! said:
hello all, while my phone was upgrading it got stucked while upgrading and i was force to remove battery and now it is in this condition-Secure Booting Error! Cause: boot certification verify ,
i cant even flash it with flash tool.
Please any guide
Click to expand...
Click to collapse
1. Download KDZ or TOT for your device
2. Download LG Flash tool
3. Flash KDZ or TOT with LG flash tool
4. Device is fixed
Im sorry i wasnt famliar with the model thought it was a g3
i'm just make my phone Super hard brick. Why dont anyone make APQ8084 model
Help please, my LG G3 F460L brick too.
Qualcomm 9008
Pio_28 said:
Help please, my LG G3 F460L brick too.
Qualcomm 9008
Click to expand...
Click to collapse
have you guys ubricked your lg G3? all need is debrick.img or dump file to put in sdcard. if you guys can join us, we can together make this success. we have solution. soultion at doorstep.. but need your support.
Not really
Kathik said:
have you guys ubricked your lg G3? all need is debrick.img or dump file to put in sdcard. if you guys can join us, we can together make this success. we have solution. soultion at doorstep.. but need your support.
Click to expand...
Click to collapse
i searched alot over the internet but nothing i found then
I paid 4000 rupees to a technician in local market to repair it.
---------- Post added at 12:46 AM ---------- Previous post was at 12:44 AM ----------
Did you get any solution for it?
muzammil457 said:
i searched alot over the internet but nothing i found then
I paid 4000 rupees to a technician in local market to repair it.
---------- Post added at 12:46 AM ---------- Previous post was at 12:44 AM ----------
Did you get any solution for it?
Click to expand...
Click to collapse
thats pretty high but does the repair done by box or by dump files, debrick image? i don;t like to use box as they solder emmc is risk life span of the device.
could you tell how he repaired? could you please make a debrick image for us? we flash it via sdcard to boot our mobile. i sent you personal message. reply to it.
Kathik said:
thats pretty high but does the repair done by box or by dump files, debrick image? i don;t like to use box as they solder emmc is risk life span of the device.
could you tell how he repaired? could you please make a debrick image for us? we flash it via sdcard to boot our mobile. i sent you personal message. reply to it.
Click to expand...
Click to collapse
I dont know how he did it. He wont tell me bcz he has to earn money too.
F460 owners soution for unbrick
F460 OWNERS . WE HAVE EASY HARD BRICK METHOD.
com port 9006 can be fixed. google partition unbrick. ubuntu method also works.
f460 : 9008 com port,, no twrp, no download mode, boot security error, verification failed. traditional lg flashtool, board diag, lg smart boot doesn;t help at all., i tried all and fed up. finally understood only 2 options on our own solutions available.
1. dump file using sd card
2. BOx method like riff, jtag, .octoplus (Risky as it shorts resistors may phone dead)
3. debrick image create ,
we our selves has to wake up and try to build by 1 and 3. 2nd option is expensive, soldering to emmc is not advisable.
for option 1, vietanmese selling dump filess, if anyone bought dumpfiles for f460, kindly upload and share with us.
option 2 by professionals repair method, option 3 debrick not yet availble for us, seniors has to look into this to create it. debrick is easy and simple and best of all.
ANY ONE HAVE DUMP FILE OR DEBRICK IMAGE FOR F460? thanks me if usefuL
Kathik said:
F460 OWNERS . WE HAVE EASY HARD BRICK METHOD.
com port 9006 can be fixed. google partition unbrick. ubuntu method also works.
f460 : 9008 com port,, no twrp, no download mode, boot security error, verification failed. traditional lg flashtool, board diag, lg smart boot doesn;t help at all., i tried all and fed up. finally understood only 2 options on our own solutions available.
1. dump file using sd card
2. BOx method like riff, jtag, .octoplus (Risky as it shorts resistors may phone dead)
3. debrick image create ,
we our selves has to wake up and try to build by 1 and 3. 2nd option is expensive, soldering to emmc is not advisable.
for option 1, vietanmese selling dump filess, if anyone bought dumpfiles for f460, kindly upload and share with us.
option 2 by professionals repair method, option 3 debrick not yet availble for us, seniors has to look into this to create it. debrick is easy and simple and best of all.
ANY ONE HAVE DUMP FILE OR DEBRICK IMAGE FOR F460? thanks me if usefuL
Click to expand...
Click to collapse
Hey, how can I contact the Vietnamese? I'm willing to pay if there's a way to solve the brick of MSM8084.
trumanh14 said:
Hey, how can I contact the Vietnamese? I'm willing to pay if there's a way to solve the brick of MSM8084.
Click to expand...
Click to collapse
i tell and help you. i have sent you private message. check it and reply.
Thank You
Kathik said:
have you guys ubricked your lg G3? all need is debrick.img or dump file to put in sdcard. if you guys can join us, we can together make this success. we have solution. soultion at doorstep.. but need your support.
Click to expand...
Click to collapse
Huge Thanks Kathik,
you saved my LG G3 F460,
now my G3 back to normal.
I follow Your instruction from Dead,Unbrick, Debrick LG G3 F460 S/K/L.
Salute to you :good:
Good Morning Everyone!!!
First off I would like to say sorry if i am posting this under the wrong section but i was not able to find a section for the Gpad 7.0 (if it is can a mod please move) So back to my dilemma here well I hard brick my New LG GPad from sprint a few days ago and I cannot get this thing up and running mainly because of the lack of availability of files (No KDZ, No TOT) so im wondering is someone on the forums who owns a WORKING Sprint LG GPad F7.0 (LGLK430) would be able to send me a copy of a backup of the device from QPST in the QCN format so that i can try to restore my device that way. Or if someone has one of the lg firmware files preferably the TOT or the hex files for QPST (None of the ones i have found online seem to be compatible with this device) that would work aswell. I know alor of people are going to say " Why dont you just take it back to sprint?" and I dont want to do this because i enjoy working with my devices and leaning new things and correcting my mistakes, taking the tablet back will be like my last resort. So sorry for the long post but i just wanna say thanks in advance to anyone who can help out
Hi! I don't have your device but if I might make a suggestion. Google for lg_imei_checker_2014_b1, enter your device's IMEI and see if the IMEI checker will provide a download for a KDZ for your device. Good luck!
Hello, Thank you for the response unfortunately i have already tried this method and there does not seem to be one publicly available and i say that because this website gaodi.net seems to have the TOT and KDZ but i was not able to get an account setup or meet the requirement due to unknown errors
paradise13 said:
Hello, Thank you for the response unfortunately i have already tried this method and there does not seem to be one publicly available and i say that because this website gaodi.net seems to have the TOT and KDZ but i was not able to get an account setup or meet the requirement due to unknown errors
Click to expand...
Click to collapse
i have tried registering for this site to download the LK430 stock firmware as well i made an account but need a certain amount of points to download it and this site seems to be the only one that has the firmware so it kinda sucks lol can anyone find this firmware on another site???
heres a link to the site if anyone can help it would be greatly appreciated
http://mobile.gaodi.net/forum.php?mod=viewthread&tid=668701
Sprint LK430
http://mobile.gaodi.net/forum.php?mod=viewthread&tid=668701[/QUOTE]
I have tried registering for the site and am trying to obtain points to download the file but the requirement requires $$$$$ :crying: IF anyone finds the stock files for this tab would be greatly appreciated
I have a stock Gpad 7 and would gladly help you if you can tell me how to do it
Sent from my LGLK430 using Tapatalk
LittleRedDot said:
I have a stock Gpad 7 and would gladly help you if you can tell me how to do it
Sent from my LGLK430 using Tapatalk
Click to expand...
Click to collapse
Thanks hun that would be awesome. as for the steps if you could please try this guide and let me know if you have success with it.
sanfranciscoandroid.co.uk/android/unlock-orange-san-francisco-ii/install-qpst-and-backup-qcn-orange-san-francisco-ii/
sprint stock recovery
could you upload a copy of your recovery. i cannot get mind to work and my tab is all hosed up. thanks
LittleRedDot said:
I have a stock Gpad 7 and would gladly help you if you can tell me how to do it
Sent from my LGLK430 using Tapatalk
Click to expand...
Click to collapse
LittleRedDot said:
I have a stock Gpad 7 and would gladly help you if you can tell me how to do it
Sent from my LGLK430 using Tapatalk
Click to expand...
Click to collapse
anyway you could upload a copy of the recovery image for the sprint variant
bsteady2 said:
anyway you could upload a copy of the recovery image for the sprint variant
Click to expand...
Click to collapse
can't post a link. PM you the lk430 recovery I saved.
ghostxxxx said:
can't post a link. PM you the lk430 recovery I saved.
Click to expand...
Click to collapse
If you still have a LK430 stock recovery image I would really appreciate the link to download. My Gpad 7.0 from sprint is in a loop...Thanks!
tekgeek101 said:
If you still have a LK430 stock recovery image I would really appreciate the link to download. My Gpad 7.0 from sprint is in a loop...Thanks!
Click to expand...
Click to collapse
PM sent.
Hey do you remember what site show you how to extract the recovery. I'm having a difficult time trying to get it back on my device. It won't get out of fastboot mode
bsteady2 said:
Hey do you remember what site show you how to extract the recovery. I'm having a difficult time trying to get it back on my device. It won't get out of fastboot mode
Click to expand...
Click to collapse
http://forum.xda-developers.com/g-pad-10/general/dev-thread-lg-g-pad-7-0-8-0-10-1-t2838995
I followed this. Actually, I saw your post in this thread in the first place when I googled "lk430 recovery".
ghostxxxx said:
http://forum.xda-developers.com/g-pad-10/general/dev-thread-lg-g-pad-7-0-8-0-10-1-t2838995
I followed this. Actually, I saw your post in this thread in the first place when I googled "lk430 recovery".
Click to expand...
Click to collapse
Hello! I am also stuck in a boot loop. If you would please send the link for the stock image, I would greatly appreciate it! Thank you.
ghostxxxx said:
can't post a link. PM you the lk430 recovery I saved.
Click to expand...
Click to collapse
If you could send me that link I would be very greatful!
Alvien89 said:
If you could send me that link I would be very greatful!
Click to expand...
Click to collapse
Don't wanna mislead people. I'm not an experienced guy. I dumpped the stock recovery following the instruction in the thread (http://forum.xda-developers.com/g-pad-10/general/dev-thread-lg-g-pad-7-0-8-0-10-1-t2838995). But, I'm not sure if I did it correctly and is this the file to save your pad from not booting or how to do it. The bottom line is that I don't wanna make it worse.
So, if you know what you're doing and you can tell from the file that it is exactly what you are looking for, PM me and I'll send you the link. Otherwise, I suggest you may get help from someone knows about compile stuff.
ghostxxxx said:
Don't wanna mislead people. I'm not an experienced guy. I dumpped the stock recovery following the instruction in the thread (http://forum.xda-developers.com/g-pad-10/general/dev-thread-lg-g-pad-7-0-8-0-10-1-t2838995). But, I'm not sure if I did it correctly and is this the file to save your pad from not booting or how to do it. The bottom line is that I don't wanna make it worse.
So, if you know what you're doing and you can tell from the file that it is exactly what you are looking for, PM me and I'll send you the link. Otherwise, I suggest you may get help from someone knows about compile stuff.
Click to expand...
Click to collapse
I'm not sure if you got my PM, but I do know exactly what I need. That is the stock recovery.img for the LG G Pad F 7.0 LK430 (which is the Sprint variant).
I made the mistake of attempting to install TWRP for a different version of the G Pad back when I originally bought the device. Now I have no recovery.img and cannot factory reset. If you have extracted the recovery.img from your stock LK430, that would indeed help me and I would greatly appreciate it.
Sent from my LGLS991 using Tapatalk
Could someone please send me the recovery image as well? (Or ideally, upload it to a file hosting site and post a link so that people don't have to keep bugging you for it!) I want to install Xposed but I have no way of backing up my device since Nandroid doesn't support it! I rather have to go back to factory than be stuck with a brick should anything go horribly wrong. Thanks.
Psythik said:
Could someone please send me the recovery image as well? (Or ideally, upload it to a file hosting site and post a link so that people don't have to keep bugging you for it!) I want to install Xposed but I have no way of backing up my device since Nandroid doesn't support it! I rather have to go back to factory than be stuck with a brick should anything go horribly wrong. Thanks.
Click to expand...
Click to collapse
Could you please provide an online storage which doesn't need register? I'll upload files to it.
I have the lg g4 h815 international model. It is rooted and has the boot loader unlocked, I manually upgraded to android 6.0 and then a few weeks or months after I was just on a normal day. So I turned my phone off, then when I needed to turn it back on it failed to start up only showing the lg logo with the boot loader unlocked sign in the top left. I tried all that I knew how to. I went into TWRP recovery and wiped all the data from it. I tried to boot up but it would not and it said that I have no OS installed, however I was sure I did. So }I tried the kdz method of restoring my phone but the lg flash tool 2014 seemed to not respond instantly.
Next I tried downloading the stock files and stock ROM and tried to flash them, but when I attempted to flash them using TWRP it froze and went back to the LG logo screen with the boot loader sign in the top left and it wont let me do anything. I can still go into download mode and recovery though. I have tried every method I know of and I am really stuck. If someone knows how to fix it then please reply, thank you.
If anyone knows how to fix it then please reply, thank you.
When u wiped u prob wiped all download a custom rom and put it on sd card the in twrp install it should be good to go
---------- Post added at 01:04 PM ---------- Previous post was at 01:03 PM ----------
uxkghost said:
If anyone knows how to fix it then please reply, thank you.
Click to expand...
Click to collapse
Try this
TheMadScientist420 said:
When u wiped u prob wiped all download a custom rom and put it on sd card the in twrp install it should be good to go
---------- Post added at 01:04 PM ---------- Previous post was at 01:03 PM ----------
Try this
Click to expand...
Click to collapse
Thank you for responding
I tried this but when I attempt this, TWRP freezes and it takes me back to the LG logo with the boot loader unlocked sign. Because it keeps freezing I cannot restore a backup or download a custom ROM and I am stuck on what to do.
EDIT: Also when trying to use the kdz method the lg flash tool 2014 just fails and force closes.
By chance u aint got the 505 serial number device do u there was a sorta recal on a few devicez if im not mistaken and im actually new to this device but i had g3 and it was a common problem on g3 for bat to go bad try dl rom and installing it while plugged in to power source other than that im not fortunate enough to have bl unlock and twrp or i might be able to give some more assistance
TheMadScientist420 said:
By chance u aint got the 505 serial number device do u there was a sorta recal on a few devicez if im not mistaken and im actually new to this device but i had g3 and it was a common problem on g3 for bat to go bad try dl rom and installing it while plugged in to power source other than that im not fortunate enough to have bl unlock and twrp or i might be able to give some more assistance
Click to expand...
Click to collapse
I have the 505 serial number, would it be helpful for me to tell you it?
It might still be waranties by lg there was a bootloop issue with those serial numz if im not mistaken lg done a recall. Id search on it
http://forum.xda-developers.com/sprint-g4/general/lg-sprint-admit-hardware-issue-t3215396
TheMadScientist420 said:
It might still be waranties by lg there was a bootloop issue with those serial numz if im not mistaken lg done a recall. Id search on it
http://forum.xda-developers.com/sprint-g4/general/lg-sprint-admit-hardware-issue-t3215396
Click to expand...
Click to collapse
But if I have unlocked the boot loader and rooted it will it void the warranty?
Ule have to look its a noted hardware failure so maybe not
TheMadScientist420 said:
Ule have to look its a noted hardware failure so maybe not
Click to expand...
Click to collapse
Thank you for all your help. But now I am stuck with a broken phone, no money to buy new one and I do not know what to do. But thank you for all the help you gave me.
uxkghost said:
Thank you for all your help. But now I am stuck with a broken phone, no money to buy new one and I do not know what to do. But thank you for all the help you gave me.
Click to expand...
Click to collapse
Now like i said im new to this device there still mey be hope this is just what ive come across so far plus helps keep ure thread to the top so maybe someone with more knowledge may come along and answer better
---------- Post added at 06:06 PM ---------- Previous post was at 06:05 PM ----------
It could be corupted somewhere which can easliy happen to. Im just not yet familiar with all the issues like i was on g2 and g3
If anyone knows how to fix it then please reply.
uxkghost said:
If anyone knows how to fix it then please reply.
Click to expand...
Click to collapse
You can try method which mentioned here:
http://forum.xda-developers.com/g4/help/lg-g4-stuck-bootloop-t3268734/page25
Read two last pages.