So I just bought my Nexus 7 yesterday and it's really nice. I bought an OTG cable to connect my keyboard dock. It worked perfectly but I am now trying to connect an IDE 320GB HDD using a Sabrent HDD SATA/IDE to USB adapter. I managed to get it connected only ONCE for a second or two to the tab. Using StickMount it told me that the drive was located in SDA1 but I am trying to look for but nothing is there mounting it again in StickMount shows that there is no drive connected. I have it hooked up to a power supply and I can hear it whirring so I don't know what the problem is. Pic:
Sent from my HTC One X using XDA Free mobile app
Hi!
What file system do you use? NTFS?
Try "Paragon NTFS & HFS+".
I find USB Mount All works best properly lists partition types and sizes, remember stickmount doesn't support ext4 also.
404-Not Found said:
So I just bought my Nexus 7 yesterday and it's really nice. I bought an OTG cable to connect my keyboard dock. It worked perfectly but I am now trying to connect an IDE 320GB HDD using a Sabrent HDD SATA/IDE to USB adapter. I managed to get it connected only ONCE for a second or two to the tab. Using StickMount it told me that the drive was located in SDA1 but I am trying to look for but nothing is there mounting it again in StickMount shows that there is no drive connected. I have it hooked up to a power supply and I can hear it whirring so I don't know what the problem is. Pic:
Sent from my HTC One X using XDA Free mobile app
Click to expand...
Click to collapse
Look under/sdcard/usbstorage/sda1/
I thought we couldnt connect an external HDD to the tablet because it will not supply enough power through the micro usb connector to power it up. I have a 1TB Toshiba USB external HDD, will I be able to mount it using stickmount or any other app?
gmfirebird said:
I thought we couldnt connect an external HDD to the tablet because it will not supply enough power through the micro usb connector to power it up. I have a 1TB Toshiba USB external HDD, will I be able to mount it using stickmount or any other app?
Click to expand...
Click to collapse
No - needs EXTERNAL poser added to the process. Some OTG adapters allow for this.
External hdd needs to be formatted to FAT32 NTFS wont work
Related
Now that JB is out for the One X I want to get a USB OTG cable.
Can anyone who has one tested and working for plugging into an external hard drive (a 1tb externally powered Toshiba drive) post a link in the UK of where to get one? This will enable me to transfer files, photos and videos etc from the hard drive quickly / easily.
Ideally from amazon or someone like that - I don't fancy guessing which ones will work etc, it would be great to only buy one!
Many thanks in advance
i couldn't connect it external hard drive ( i think hard drive needs more Electricity ) but it works with flash memories fine
I think an OTG cable is an OTG cable... I just tried the one that came with my USB keyboard folio case I use with my Nexus 7, which works fine with the HOX now its updated to the new HBoot/kernel.
Azurael said:
I think an OTG cable is an OTG cable... I just tried the one that came with my USB keyboard folio case I use with my Nexus 7, which works fine with the HOX now its updated to the new HBoot/kernel.
Click to expand...
Click to collapse
true, any otg cable should work if it's really otg, however you should get a usb powered one for a hard drive if the hard drive does not have a y split cable.
Sent from my HTC One X using xda app-developers app
I'm using a standard usb otg cable from amazon. I have an external powered hdd(2gb)(I believe it must be self powered anyways) and using the app called usb otg helper to make ntfs work with android.
Sent from my HTC One X using xda premium
I use otg cable from my prestigo and it works fine.
Sent from my HTC One X using xda app-developers app
davitox87 said:
I'm using a standard usb otg cable from amazon. I have an external powered hdd(2gb)(I believe it must be self powered anyways) and using the app called usb otg helper to make ntfs work with android.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Ahh - thank you!!
I have a Bytestor 4gb FAT32 stick that works fine with no extra power etc, but I tried my 1TB external powered hard drive and it failed
I only just realised it is NTFS to avoid the 4gb limit for files for videos etc.
So if I install USB OTG Helper I can use NTFS? Nice - that needs Root though - how can you use NTFS drives if you are not-rooted and stock JB?
oh, and I just got one of the standard USB OTB cables off Amazon for £3 and it worked fine. As others said, just buy any of them they probably work fine!
gunswick said:
oh, and I just got one of the standard USB OTB cables off Amazon for £3 and it worked fine. As others said, just buy any of them they probably work fine!
Click to expand...
Click to collapse
i paid 99p for mine, it works fine.
Hi
I have OTG cable but i can not using this cable. What can i do?
SvSGEn said:
Hi
I have OTG cable but i can not using this cable. What can i do?
Click to expand...
Click to collapse
Are you updated to JB?
Sent from my One X
I just use a regular OTG cable.
bought cable from eBay and seems its working fine, the only problem is that if i connect usb flash with files on it sometimes it deletes most of files. that happened with my cars USB flash, i tried to connect it to manage some music but it deleted about 3GB of 4GB music...
can anybody tell me why is this happening?
Hey guys
i just got a usb otg cable but i can't get the kindle to tead my flash drive.
any help pls?
vess_csm said:
Hey guys
i just got a usb otg cable but i can't get the kindle to tead my flash drive.
any help pls?
Click to expand...
Click to collapse
Many OTG peripherals require the use of a powered USB hub as the Kindle needs power assistance in the USB department. The app "Stick Mount" has rendered success with accessing some flash drives. Unfortunately not ALL flash drives are compatible.
guitarman2010 said:
Many OTG peripherals require the use of a powered USB hub as the Kindle needs power assistance in the USB department. The app "Stick Mount" has rendered success with accessing some flash drives. Unfortunately not ALL flash drives are compatible.
Click to expand...
Click to collapse
i tried that app and nothing happens. it has a diagnostic tool also and it recognizes the flash drive.. but with no success.
if i need external power for a hub, then this entire thing is pointless.
vess_csm said:
i tried that app and nothing happens. it has a diagnostic tool also and it recognizes the flash drive.. but with no success.
if i need external power for a hub, then this entire thing is pointless.
Click to expand...
Click to collapse
If that app picks it up than a powered USB hub will probably make it work. For example....I tried using an optical USB mouse that was plugged straight into the OTG cable plugged straight into the Kindle. The mouse actually lite up BUT nothing happened besides that. When I obtained a powered hub it worked great using the same OTG cable with hub. What ROM are you using just out of curiousity?
I am using the 4.2.1_r1 AOSP ROM.
the thing is that I don't want to be dependant on elecricity. there isn't a plug every where. thank you for the time spent on my question
maybe should a nexus 7 and forget about it.
sent using xda app
vess_csm said:
I am using the 4.2.1_r1 AOSP ROM.
the thing is that I don't want to be dependant on elecricity. there isn't a plug every where. thank you for the time spent on my question
maybe should a nexus 7 and forget about it.
sent using xda app
Click to expand...
Click to collapse
Well if you don't want to be dependent on electricity there is a different method people have used for a USB power supply. Here is a Youtube link that should explain it, or you could just get a Nexus 7 lol http://m.youtube.com/#/watch?v=BFEMh0ZYT5M&desktop_uri=/watch?v=BFEMh0ZYT5M
Sent from my SCH-R880 using xda app-developers app
thanks for all the help
sent using xda app
The sandisk cruzer sdcz36-004g
http://www.amazon.com/gp/product/B007JR531I/ref=sr_1_2?ie=UTF8&keywords=sdcz36-004g&qid=1357184937&sr=8-2
Only 4gb but I'd prefer to carry around a few on a ring than a powered hub, or that arrangement with the Y cable and the phone charger.
Plug it directly into the otg cable and off you go, I've played 720p video from the flashdrive with several ROMs recently, paranoid android worked great, TWA_priv's 4.2 also works but with some mounting wackiness sometimes.
USB mass storage watcher seems better than stickmount right now IMO.
Would the 8gb cruzer switch work? I am planning on buying an OTG Cable and need to specify.
Vlasp said:
Would the 8gb cruzer switch work? I am planning on buying an OTG Cable and need to specify.
Click to expand...
Click to collapse
Sure it will work, but you'll need a wired hub of some sort to mount it, either connected to an outlet or using a Y cable and a battery powered phone charger, which is hassle to carry, finicky to mount and not really OTG. I've never found a drive over 4 gb which was usable just by sticking it into the end of the otg cable, and most drives 4 gb or under don't work either.
The cruzer 4gb is my one and only recommendation I'm afraid.
I know this thread is a little old but just wanted to list the mini attache 16gig flash works with no powered hub.
Downside is that it only works till about 70% of battery. After that its not enough voltage
Plug it into the kindle, then plug in the flash drive.
nunook said:
I know this thread is a little old but just wanted to list the mini attache 16gig flash works with no powered hub.
Downside is that it only works till about 70% of battery. After that its not enough voltage
Click to expand...
Click to collapse
Can you detail which app you used to mount it? I've tried quite a few of them but stick with USB otg helper and USB mass storage watcher.
What you need
- Nexus 7 2013
- WD 2tb Passport HD ( no ac required)
http://www.amazon.com/Passport-Portable-External-Storage-WDBY8L0020BBK-NESN/dp/B005HMKKH4
- Portable External battery
http://www.ebay.ca/itm/2USB-30000ma...hone_PDA_Batteries&hash=item258103ee95&_uhb=1
- Micro USB Host OTG Cable with USB power Male Female for cell phone Tablet
http://www.ebay.ca/itm/USB-2-0-Micr...bles_Hubs_Adapters&hash=item3385f60dc4&_uhb=1
Works flawlessly. I'm able to access all my files on the hard drive through my tablet. The down side of it is you gotta carry a portable external battery for it to work. Other than that its pretty useful.
aznduk said:
What you need
- Nexus 7 2013
- WD 2tb Passport HD ( no ac required)
http://www.amazon.com/Passport-Portable-External-Storage-WDBY8L0020BBK-NESN/dp/B005HMKKH4
- Portable External battery
http://www.ebay.ca/itm/2USB-30000ma...hone_PDA_Batteries&hash=item258103ee95&_uhb=1
- Micro USB Host OTG Cable with USB power Male Female for cell phone Tablet
http://www.ebay.ca/itm/USB-2-0-Micr...bles_Hubs_Adapters&hash=item3385f60dc4&_uhb=1
Works flawlessly. I'm able to access all my files on the hard drive through my tablet. The down side of it is you gotta carry a portable external battery for it to work. Other than that its pretty useful.
Click to expand...
Click to collapse
Really nice to run across this! I have a 1TB WD Passport, OTG cable, an Anker external battery, and Nexus Media Importer and they work great with this setup. I had tried a powered USB hub and it worked but this is much better from my perspective - hadn't thought of trying the battery pack.
Interestingly, I also have 2 500GB WD Passports that worked without additional power on my 2012 N7 but they won't work without additional power on my 2013 N7.
Thanks for the post!
Dave
aznduk said:
Works flawlessly. I'm able to access all my files on the hard drive through my tablet. The down side of it is you gotta carry a portable external battery for it to work. Other than that its pretty useful.
Click to expand...
Click to collapse
Can you also write to the hard drive?
Thanks, Michael.
does it have to be a 2 tb? i have a 1.5 tb
mtbvfr said:
Can you also write to the hard drive?
Thanks, Michael.
Click to expand...
Click to collapse
yes, im currently on cm10.2 m1(milestone) rom with stock kernal. playing videos straight off hd tends to reboot my device. Let me know if you get similar issues. i find copying the file into the sd storage is the most stable way. hopefully CyanogenMod will come up with an update that corrects this problem
Midnight Marauder said:
does it have to be a 2 tb? i have a 1.5 tb
Click to expand...
Click to collapse
It works with any hd drive that doesnt require an outlet plug
Is it possible to use a USB hub, connect the HDD to the hub, mount the HDD and then connect a SD Card reader to the USB hub, mount the SD card reader and transfer files from the SD card to the HDD??
TehFonz said:
Is it possible to use a USB hub, connect the HDD to the hub, mount the HDD and then connect a SD Card reader to the USB hub, mount the SD card reader and transfer files from the SD card to the HDD??
Click to expand...
Click to collapse
No. It appears that a single external drive/memory device is the limit (at least on a stock unit).
I forgot to ask before, does this require rooting?
Midnight Marauder said:
I forgot to ask before, does this require rooting?
Click to expand...
Click to collapse
No, I'm stock.
I have a WD element 1tb, I'll need the OTG but the external battery is required to play it on n7?
vinceboiii said:
I have a WD element 1tb, I'll need the OTG but the external battery is required to play it on n7?
Click to expand...
Click to collapse
Yes, and an app like Nexus Media Importer to access it. I'm actually assuming that it will require additional power, like my 1TB WD Passport does - I haven't tried this particular model myself.
ahh right need that app too okay thanks. I will give this a try after I move and settle in.
Clarify cable connection
I don't understand. How do you have it cabled? For example, I have a limefuel 15600mAh battery with a microUSB input (for power) and two USB outputs to power a device. How are you cabling the Passport to the battery and then to the Nexus?
kennybellew said:
I don't understand. How do you have it cabled? For example, I have a limefuel 15600mAh battery with a microUSB input (for power) and two USB outputs to power a device. How are you cabling the Passport to the battery and then to the Nexus?
Click to expand...
Click to collapse
I'm using a different setup, a dual A to Micro-B USB 3.0 Y Cable like this --
http://www.amazon.com/gp/product/B005M0ICG2/ref=wms_ohs_product?ie=UTF8&psc=1
The USB 3 male plug goes to the WD; the male USB 2 power plug goes to the external battery; the other male USB 2 goes to a OTG cable connected to the Nexus 7. I use Nexus Media Importer to access the WD.
Dave
sparksd said:
I'm using a different setup, a dual A to Micro-B USB 3.0 Y Cable like this --
http://www.amazon.com/gp/product/B005M0ICG2/ref=wms_ohs_product?ie=UTF8&psc=1
The USB 3 male plug goes to the WD; the male USB 2 power plug goes to the external battery; the other male USB 2 goes to a OTG cable connected to the Nexus 7. I use Nexus Media Importer to access the WD.
Dave
Click to expand...
Click to collapse
is there cheaper on ebay for that microUSB 3.0 y cable? that looks interesting if u can do usb3.0 speeds TO and FROM your tablet/phone
sparksd said:
I'm using a different setup, a dual A to Micro-B USB 3.0 Y Cable like this --
The USB 3 male plug goes to the WD; the male USB 2 power plug goes to the external battery; the other male USB 2 goes to a OTG cable connected to the Nexus 7. I use Nexus Media Importer to access the WD.
Dave
Click to expand...
Click to collapse
Thanks. That helps.
cobyman7035 said:
is there cheaper on ebay for that microUSB 3.0 y cable? that looks interesting if u can do usb3.0 speeds TO and FROM your tablet/phone
Click to expand...
Click to collapse
Probably are - Amazon was convenient. As for speed, I don't have a way to measure transfer speeds but I do know it is fast and in no way impedes video file viewing direct from the HDD. Using on a laptop, I can see that it does give true USB 3.0 transfer speeds.
sparksd said:
Yes, and an app like Nexus Media Importer to access it. I'm actually assuming that it will require additional power, like my 1TB WD Passport does - I haven't tried this particular model myself.
Click to expand...
Click to collapse
You don't really need the Nexus Media Importer app to access external hard drive files.I'm on Cm10.2.0 and I'm using ES File Explorer to access the files. I do get random reboots due to the Nexus overheating say after an hr of video play directly from the HD.
aznduk said:
You don't really need the Nexus Media Importer app to access external hard drive files.I'm on Cm10.2.0 and I'm using ES File Explorer to access the files. I do get random reboots due to the Nexus overheating say after an hr of video play directly from the HD.
Click to expand...
Click to collapse
True - I was responding from the perspective of a stock device. I haven't seen the reboots - are you overclocking with Cm?
Anyone know why my external hard drives aren't able to be detected? I am using stickmount. I have gotten pen usb drives to work. Even the powered external hard drive does not work.
d0rkster said:
Anyone know why my external hard drives aren't able to be detected? I am using stickmount. I have gotten pen usb drives to work. Even the powered external hard drive does not work.
Click to expand...
Click to collapse
Try this:
https://play.google.com/store/apps/details?id=com.homeysoft.nexususb.importer&hl=en
That's what I use and it works for me.
If it doesn't work, there's always the 15 minute refund window.
I have an external HDD plugged in now recognized by Nexus Media Importer.
Sent from my Nexus 7 using xda app-developers app
i use very cheap chinese cable. all ok
I was wondering if anyone has been able to access their external HDD via a otg cable. My hard drive is usb 3.0 but 2.0 compatible. The HDD is self-powered and I have the usb-Y otg cable with regular female usb for drive, micro usb to phone, and female micro usb for external power. I think my problem lies in the fact that the external drive is fat32 because the mounting apps require NTFS and HFS+.
When I power it with my 5V 2.0A samsung charger I get nothing no drive noise or motion. When I connect the otg "power" to a usb hub I hear the drive running.
Any ideas?
sent from my SGH-T889-JMX2
I have no problem using hd with my note2. Im using
https://play.google.com/store/apps/details?id=com.paragon.mounter
Sent from my SGH-T889 using xda app-developers app