Develop Bugs

Going back to stock

Here is my necessary fastboot getvar details:
bootloader: 3.19.0.0000
version-main: 4.18.720.8
version-misc: PVT SHIP S-OFF
modelid: 0P6B65000
cidnum: 11111111
I want to go back to stock with 4.16.401.10 base. I wanted to know if I can flash a firmware for 4.16.401.10 on my device, but I also read that my MID also needs to be changed. I'm very confused about the whole process. I want to know what it takes to flash the firmware 4.16.401.10 on my device and also if I can also go to stock with that. Please help me. Consider me a noob. I would really appreciate your help.
I'm taking all these steps, because if I want to go back to stock, I can RUU for 4.16.401.10

Why not just use the 4.18.720.8 RUU? The FW is the same so you can use the Lollipop ROMs without issues

Orange UK RUU (ORANG001)

Hi, Does any one has latest Orange UK RUU OS v. 2.10.61.6 (cid = ORANG001)? Thanks in advance

Anyone please... My device is currently in bootloop. BL is locked , OEM unclocking is disabled. There no other way I can do but to flash an RUU

side_flip15 said:
Anyone please... My device is currently in bootloop. BL is locked , OEM unclocking is disabled. There no other way I can do but to flash an RUU
Click to expand...
Click to collapse
As far as I know there is no RUU you could use unless you are S-OFF. But maybe llabtoofers RUU service can help you out.

Flippy498 said:
As far as I know there is no RUU you could use unless you are S-OFF. But maybe llabtoofers RUU service can help you out.
Click to expand...
Click to collapse
Thanks! I already made an inquiry..
another option I am thinking is to unlocked BL and install custom rom and recovery but unfortunately I cannot unlocked BL since OEM unlocking is disabled in dev option. Is there anyway to toggle OEM unlocking may in adb or fastboot?

side_flip15 said:
Thanks! I already made an inquiry..
another option I am thinking is to unlocked BL and install custom rom and recovery but unfortunately I cannot unlocked BL since OEM unlocking is disabled in dev option. Is there anyway to toggle OEM unlocking may in adb or fastboot?
Click to expand...
Click to collapse
Not as far as I know...

Flippy498 said:
Not as far as I know...
Click to expand...
Click to collapse
After several wipes of cache and factory reset, my phone booted but I am stuck at initial setup as it requires the previous gmail synced. Unfortunately I forgot the password and no way to recover because the email was just a dummy for testing. Anyway to bypass FRP on the M9?

I want to make update to android 6, now i have version 5.1 firmware orange uk. (I have no official update) BOOT LOCKED, LK -1.0.0.0000 S-ON data on phone: HTC HIMA UHL PVT S-ON, cid orang001, mid opja 10000 o.s .. 2.10.61.6, radio u 11,440,601. * - I want to know if it can unlock boot, install TWRP and super su, then i can install a custom rom with android MM and what custom rom ????????????? expect an answer, thank you very much

Hi Everybody, plz help me, my phone HTC M9 is crached, and it can't boot to the OS, I tried to unlock it many time but no result, it's always relocked. now I need the officiel RUU to return the life to my HTC
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) version-main: 2.10.61.6
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440601_83.06.50709G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: ORANG001

Problem with htc one m8 ota

I tried upgrading my HTC one m8 by RUU but keep getting this error 155 wrong RUU used....
my phone is:
S-off
bootloader locked
CID version supercid 1111111
I tried using fastboot method,.zip method but nothing works

BruceWayne16594 said:
keep getting this error 155 wrong RUU used....
Click to expand...
Click to collapse
In order to troubleshoot this, we need to know what RUU you are trying (exact file name).
SuperCID is not enough, you need to also match MID in order to run RUU.
Do fastboot getvar all, and post the result (delete IMEI and serial number before posting).
Also, your title says "OTA" but your post says "RUU". Confirm its RUU you are talking about? RUU and OTA are 2 very different things, with very different requirements, so you need to clarify here.

redpoint73 said:
In order to troubleshoot this, we need to know what RUU you are trying (exact file name).
SuperCID is not enough, you need to also match MID in order to run RUU.
Do fastboot getvar all, and post the result (delete IMEI and serial number before posting).
Also, your title says "OTA" but your post says "RUU". Confirm its RUU you are talking about? RUU and OTA are 2 very different things, with very different requirements, so you need to clarify here.
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 1.08.20.0916
version-cpld: None
version-microp: None
version-main: 2.16.654.4
version-misc: PVT SHIP S-OFF
meid: 99000499079516
product: m8_whl
platform: hTCBmsm8974
modelid: 0P6B70000
cidnum: 11111111
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 8a0f02ff
hbootpreupdate: 11
gencheckpt: 0
Yeah i'm talking about RUU
Ruu version (tried both)
RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_6.20.651.3
RUU_M8_UL_M60_SENSE70_MR_BrightstarUS_WWE_6.12.1540.4

BruceWayne16594 said:
RUU_M8_UL_M60_SENSE70_MR_BrightstarUS_WWE_6.12.1540.4
Click to expand...
Click to collapse
Since you have the Sprint version, you should not try to use this RUU. The Sprint version has different partitioning than other M8 versions. Trying to flash any firmware or RUU besides Sprint can result in a radio brick.
Error 155 is common when trying to flash MM RUU on any device that is currently on LP (or in your case KK) firmware. Fastboot flash the 6.20.651 .3 firmware from the following thread, then try the RUU again: http://forum.xda-developers.com/showthread.php?t=2729173
Also, it looks like you have the Harmon Kardon variant (654 version numbers, versus 651 for non-HK Sprint). But I think 6.20.651 should still work. Otherwise, use the 6.20.654.3 firmware, then the 6.20.654.3 RUU.

redpoint73 said:
Since you have the Sprint version, you should not try to use this RUU. The Sprint version has different partitioning than other M8 versions. Trying to flash any firmware or RUU besides Sprint can result in a radio brick.
Error 155 is common when trying to flash MM RUU on any device that is currently on LP (or in your case KK) firmware. Fastboot flash the 6.20.651 .3 firmware from the following thread, then try the RUU again: http://forum.xda-developers.com/showthread.php?t=2729173
Also, it looks like you have the Harmon Kardon variant (654 version numbers, versus 651 for non-HK Sprint). But I think 6.20.651 should still work. Otherwise, use the 6.20.654.3 firmware, then the 6.20.654.3 RUU.
Click to expand...
Click to collapse
I already have the .zip version of the Ruu used , should i use that??

Thanks,
i succesfully flashed the firmware and rebooted but then the phone got stuck at splash screen.... pls help

BruceWayne16594 said:
I already have the .zip version of the Ruu used , should i use that??
Click to expand...
Click to collapse
Firmware and RUU are not the same thing; which is the very reason I've advised to flash the firmware, then the RUU.
Firmware is a small but critical zip package that contains several modules, including hboot, radio, and a few others. Once you install the firmware, the RUU should run properly to update all the remaining partitions.
---------- Post added at 09:16 AM ---------- Previous post was at 09:14 AM ----------
BruceWayne16594 said:
Thanks,
i succesfully flashed the firmware and rebooted but then the phone got stuck at splash screen.... pls help
Click to expand...
Click to collapse
You didn't follow my instruction, to flash the firmware, then try the RUU again. As I just mentioned above, RUU and firmware are not the same, and are 2 very different things.

Solved
redpoint73 said:
Firmware and RUU are not the same thing; which is the very reason I've advised to flash the firmware, then the RUU.
Firmware is a small but critical zip package that contains several modules, including hboot, radio, and a few others. Once you install the firmware, the RUU should run properly to update all the remaining partitions.
---------- Post added at 09:16 AM ---------- Previous post was at 09:14 AM ----------
You didn't follow my instruction, to flash the firmware, then try the RUU again. As I just mentioned above, RUU and firmware are not the same, and are 2 very different things.
Click to expand...
Click to collapse
Thanks,
I flashed the firmware follwed by the RUU as mentioned by you, this time following each thing very carefully and ................IT WORKS!!!!!!!!!!!
Thanks a lot

You're very welcome. Happy you got it sorted out.

Marshmallow firmware for S-ON HTC m8

I am looking for firmware zip for my m8:
S-ON
modelid: 0P6B10000
cidnum: HTC__032
version-main: 4.16.401.10
No luck in searching since 24 hours... 1)Maybe You guys have some links?
getting S-OFF is the last option i think of because of 25$ for sunshine
2)Please tell me if installing some stock rom will update "version-main: 4.16.401.10".
Best regards,
Please help

1. http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
2. http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6

Need stock details of my m8.

Hi there, recently i bought used m8 and its android version is 4.4.3, it is made in ireland as htc said. It is s-off and has supercid 11111, It means previous owner customized this device. I need to know its orignal Cid and Mid so i will update it to marshmallow( since i am not receving ota updates), so please help me out what should i do...I also dont know it has stock rom/ recovery. Bootloader is locked. I guess it has stock recovery. I want any stock upgrade because this rom has many bugs like delaying messeges e.t.c. Thanks in advance

worgamerx said:
Hi there, recently i bought used m8 and its android version is 4.4.3, it is made in ireland as htc said. It is s-off and has supercid 11111, It means previous owner customized this device. I need to know its orignal Cid and Mid so i will update it to marshmallow( since i am not receving ota updates), so please help me out what should i do...I also dont know it has stock rom/ recovery. Bootloader is locked. I guess it has stock recovery. I want any stock upgrade because this rom has many bugs like delaying messeges e.t.c. Thanks in advance
Click to expand...
Click to collapse
Power off your phone, then boot it up by holding both the power button + vol down. This will take you to the bootloader. Post here what it says there. To navigate in the bootloader, use the vol keys to change selections, and the power button to select. You'll need to know that to select reboot.

xunholyx said:
Power off your phone, then boot it up by holding both the power button + vol down. This will take you to the bootloader. Post here what it says there. To navigate in the bootloader, use the vol keys to change selections, and the power button to select. You'll need to know that to select reboot.
Click to expand...
Click to collapse
Already mentioned:
CID:111111
S-Off
Bootloader is locked and i guess it have stock recovery.
Software number is: 2.11.708.2
I think rom is stock because it matchs with stock software number. But i want to upgrade so suggest me what should i do.

worgamerx said:
Already mentioned:
CID:111111
S-Off
Bootloader is locked and i guess it have stock recovery.
Software number is: 2.11.708.2
I think rom is stock because it matchs with stock software number. But i want to upgrade so suggest me what should i do.
Click to expand...
Click to collapse
Already mentioned where? Certainly not here. That CID means absolutely nothing.
And the ROM is stock because it matches with what? You have matched the OS version in bootloader, or the version-main number in you getvar with the software version in settings > about you mean?
If that is your software number, then you probably are stock, since I don't know of any ROMs that use 708 as a base.
Do you have TWRP recovery still installed? You can tell if you boot to bootloader and then boot to recovery (you need to select hboot to get the recovery option in bootloader). If the TWRP logo comes up, then you do, and this will be an easy fix by going to this thread to find a stock ROM backup and stock recovery for you to flash back to stock so that you can get OTA updates on your device.

Twrp is not installed.....its still on stock recovery....i matched the software number from the settings in about section with other device running this OS.
The main prob is its supercid is changed so i dont know which rom is compatible with it.

worgamerx said:
Twrp is not installed.....its still on stock recovery....i matched the software number from the settings in about section with other device running this OS.
The main prob is its supercid is changed so i dont know which rom is compatible with it.
Click to expand...
Click to collapse
Well, almost any new ROM isn't compatible because your firmware is too old. You need to update that first. That's what I'm trying to help you with here.
Also, that phone isn't Irish. None of them are. UK yes, Ireland no. It's an Asian model. Specifically, from Hong Kong.
The only way I could offer help is if you were to unlock the bootloader again. Instead I will mention @ckpv5 here (he'll get a notification because of the mention) because I'm pretty sure he has a link to the RUU you need to update.
He's a really helpful guy, and will respond here when he sees the notification. He's not logged in now, so just be patient.
Good luck!

xunholyx said:
Well, almost any new ROM isn't compatible because your firmware is too old. You need to update that first. That's what I'm trying to help you with here.
Also, that phone isn't Irish. None of them are. UK yes, Ireland no. It's an Asian model. Specifically, from Hong Kong.
The only way I could offer help is if you were to unlock the bootloader again. Instead I will mention @ckpv5 here (he'll get a notification because of the mention) because I'm pretty sure he has a link to the RUU you need to update.
He's a really helpful guy, and will respond here when he sees the notification. He's not logged in now, so just be patient.
Good luck!
Click to expand...
Click to collapse
Thank you so much. You are really kind person. I am waiting

Post fastboot getvar all result (without serial & imei no) to see what is best for you

ckpv5 said:
Post fastboot getvar all result (without serial & imei no) to see what is best for you
Click to expand...
Click to collapse
thank you for replying
here is the result:
version: 0.5
version-bootloader: 3.18.0.0000
version-baseband: 1.19.21331147A1.16G
version-cpld: None
version-microp: None
version-main: 2.11.708.2
version-misc: PVT SHIP S-OFF
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B10000
cidnum: 11111111
battery-status: good
batter-voltage: 0mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: c802cb02
hbootpreupdate: 11
gencheckpt: 0

worgamerx said:
thank you for replying
here is the result:
version-bootloader: 3.18.0.0000
version-main: 2.11.708.2
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B10000
cidnum: 11111111
security: off
Click to expand...
Click to collapse
Your device has Hong Kong firmware but the MID is EU.
You won't get OTA with this combination.
I suggest to install EU RUU as this is easier, no need to change MID to Hong Kong.
You can follow this, direct update to the latest Marshmallow
Link : http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6

ckpv5 said:
Your device has Hong Kong firmware but the MID is EU.
You won't get OTA with this combination.
I suggest to install EU RUU as this is easier, no need to change MID to Hong Kong.
You can follow this, direct update to the latest Marshmallow
Link : http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Click to expand...
Click to collapse
I am going to install RUU.....its my first time that i am doing such a thing..Thank you so much God Bless You

thank you so much "ckpv5", i just followed your instruction and i successfully installed marshmallow, thanks again you helped me out . i am also thanks full to "xunholyx".