Front Camera smoothing problem. - G3 Q&A, Help & Troubleshooting

Hi all
I bought phone a week ago , 502k serie
I have problem with front camera. It makes photos very smooth even when i make smoothness slider to 0 . Is there anyway to completely close it. Or to fix this problem.
Here an example

Looks like only I have this problem which means my camera is not working well

1sin1 said:
Looks like only I have this problem which means my camera is not working well
Click to expand...
Click to collapse
1) Root your phone. No, don't ask me how, there are detailed gudes in "General" section.
2) Open /etc/camera_config.xml in any text editor and change the value of "beautyshot_supported" to false. The problem is clearly software one, this method should completely disable smoothing.

YaDr said:
1) Root your phone. No, don't ask me how, there are detailed gudes in "General" section.
2) Open /etc/camera_config.xml in any text editor and change the value of "beautyshot_supported" to false. The problem is clearly software one, this method should completely disable smoothing.
Click to expand...
Click to collapse
Thanks mate , thats good. I know how to root but i am not sure about it right now. I just bought it and i dont want to lose warranty very early.
So I guess it is not possible to reach that config file without root ?

1sin1 said:
Thanks mate , thats good. I know how to root but i am not sure about it right now. I just bought it and i dont want to lose warranty very early.
So I guess it is not possible to reach that config file without root ?
Click to expand...
Click to collapse
No, it's not possible to change this file without root.

YaDr said:
No, it's not possible to change this file without root.
Click to expand...
Click to collapse
Thanks mate , I finally root my phone few days ago and remember this topic I created .. So i tried your way and It is good so far (need more test) ..
Thanks again.

Related

Request for Japanese SHARP DIAG driver!

Hi, I have a SHARP SH-06E and I successfully turned on its DIAG mode.
Now I have some devices not recognized, the HW IDs are below:
USB\VID_04DD&PID_96CD&REV_0228&MI_02
USB\VID_04DD&PID_96CD&MI_02
USB\VID_04DD&PID_96CD&REV_0228&MI_03
USB\VID_04DD&PID_96CD&MI_03
I cannot find its driver anywhere...
Can I mod the HTC/Moto one and force it installed? I want to use QPST to explore its internals.
tewilove said:
Hi, I have a SHARP SH-06E and I successfully turned on its DIAG mode.
Now I have some devices not recognized, the HW IDs are below:
USB\VID_04DD&PID_96CD&REV_0228&MI_02
USB\VID_04DD&PID_96CD&MI_02
USB\VID_04DD&PID_96CD&REV_0228&MI_03
USB\VID_04DD&PID_96CD&MI_03
I cannot find its driver anywhere...
Can I mod the HTC/Moto one and force it installed? I want to use QPST to explore its internals.
Click to expand...
Click to collapse
Hello. How do did you enable in this mode smartphone Diag mode? You can link to the manual?
Killsleep said:
Hello. How do did you enable in this mode smartphone Diag mode? You can link to the manual?
Click to expand...
Click to collapse
Temp root, and then run this it will allow DIAG.
Then setprop, see init.qcom.rc for details.
IIUC, diag mode drivers should be same for all Snapdragon (600 here) devices. Anyway it's pretty easy to edit driver ID and force installation.
Please keep us in touch, enabling QPST access will be great.
Also maybe you know is there any way to enter recovery without ADB?
temp root
tewilove said:
Temp root, and then run this it will allow DIAG.
Then setprop, see init.qcom.rc for details.
Click to expand...
Click to collapse
How can I temp root the sh-06e? Doe's an english description exist?
Hree said:
How can I temp root the sh-06e? Doe's an english description exist?
Click to expand...
Click to collapse
I am still working on the translation of the rootkit. Should be ready in the next couple of days and will upload it to my website.
cheeseus said:
I am still working on the translation of the rootkit. Should be ready in the next couple of days and will upload it to my website.
Click to expand...
Click to collapse
Thank you, than I will see it on your famous webside :laugh:
Hree said:
Thank you, than I will see it on your famous webside :laugh:
Click to expand...
Click to collapse
TWO DIFFERENT rootkits translated and uploaded
But please note that I've had to implement a script that only allows one download per 24 hours because there has been some abuse, and my hosting plan doesn't offer a lot of traffic.
cheeseus said:
TWO DIFFERENT rootkits translated and uploaded
But please note that I've had to implement a script that only allows one download per 24 hours because there has been some abuse, and my hosting plan doesn't offer a lot of traffic.
Click to expand...
Click to collapse
Thank you, I used the Sharp Android Rooting Tools version 6.1 / 6.01.2014 and it functioned well.
You did a good job
cheeseus said:
TWO DIFFERENT rootkits translated and uploaded
But please note that I've had to implement a script that only allows one download per 24 hours because there has been some abuse, and my hosting plan doesn't offer a lot of traffic.
Click to expand...
Click to collapse
My sharp is rooted thanks to you! Thank you! But what can I do now? Can I upgrade my sh-06e with Kitkat or update my present system 4.2?
Best regards for all of you!
joshua.maxell said:
My sharp is rooted thanks to you! Thank you! But what can I do now? Can I upgrade my sh-06e with Kitkat or update my present system 4.2?
Best regards for all of you!
Click to expand...
Click to collapse
Welcome!
No, I'm afraid not. Sharp's (and all of Japanese manufacturers') smartphones use highly customized versions of Android. Your only chance to upgrade to a higher version is when Sharp/Docomo release it. Still, you will need to have installed all minor (software) updates before that. What this means: Once a new version of Android is released, send your phone to someone in Japan (e.g. the seller you bought it from) to update to latest build version, then upgrade Android, then return to you. Everything else - you risk bricking the phone.
What you can do now that you have root... Install Titanium Backup Pro to make backups of /system apps, then uninstall them (but make sure you read on Japanese sites what can and what can't be disabled unless you want to brick your phone).
Another thing you can do is install Link2SD to integrate updates of built-in apps into /system (overwrite the built in apps with newer versions). This, however, is not really necessary now that the phones come with 8-16 GB of onboard storage -- used to be important for phones like my 005SH or SH-01D where available ROM space was 200 MB and 850 MB respectively.
Yet another thing you can do is install AutoStarts to disable certain apps from launching when the phone boots, e.g. OneSeg TV and many others -- this will make the phone work faster. But then again, the SH-06E is pretty powerful... how much faster do you want it to be?
cheeseus said:
Welcome!
No, I'm afraid not. Sharp's (and all of Japanese manufacturers') smartphones use highly customized versions of Android. Your only chance to upgrade to a higher version is when Sharp/Docomo release it. Still, you will need to have installed all minor (software) updates before that. What this means: Once a new version of Android is released, send your phone to someone in Japan (e.g. the seller you bought it from) to update to latest build version, then upgrade Android, then return to you. Everything else - you risk bricking the phone.
What you can do now that you have root... Install Titanium Backup Pro to make backups of /system apps, then uninstall them (but make sure you read on Japanese sites what can and what can't be disabled unless you want to brick your phone).
Another thing you can do is install Link2SD to integrate updates of built-in apps into /system (overwrite the built in apps with newer versions). This, however, is not really necessary now that the phones come with 8-16 GB of onboard storage -- used to be important for phones like my 005SH or SH-01D where available ROM space was 200 MB and 850 MB respectively.
Yet another thing you can do is install AutoStarts to disable certain apps from launching when the phone boots, e.g. OneSeg TV and many others -- this will make the phone work faster. But then again, the SH-06E is pretty powerful... how much faster do you want it to be?
Click to expand...
Click to collapse
Thank you very much for this reply! That's very kind of you. My phone has some little fault (software). When I'm using the lock screen (trying to unlock) the phone resets itself. That's the one problem I have at the moment. My sharp is new and really great but I have little kids and I'm afraid that one day they may use my phone.
I thought if my phone is rooted I can upgrade the system to kitkat or normal jellybean ( not branded) and fix that problem.
Looks like I have only two options. Sell it on ebay or try it to do some upgrade. There are some apps on google play, maybe mobile odin pro or something? Any ideas?
regards for all
joshua.maxell said:
Thank you very much for this reply! That's very kind of you. My phone has some little fault (software). When I'm using the lock screen (trying to unlock) the phone resets itself. That's the one problem I have at the moment. My sharp is new and really great but I have little kids and I'm afraid that one day they may use my phone.
I thought if my phone is rooted I can upgrade the system to kitkat or normal jellybean ( not branded) and fix that problem.
Looks like I have only two options. Sell it on ebay or try it to do some upgrade. There are some apps on google play, maybe mobile odin pro or something? Any ideas?
regards for all
Click to expand...
Click to collapse
Hm... resetting when unlocking the screen... sounds weird. A friend has this phone, and my brother is still waiting to receive his in the next couple of days. But I haven't heard of any such issue with it. What is your build version? The latest one is 1.00.07. I read in the updates list that various bugs have been fixed but no mention of yours.
Have you disabled any apps? Maybe you can try re-enabling everything, then resetting to factory settings --- NEVER reset to factory setting if you have disabled any apps. Not sure about a rooted SH-06E.
I am sure that Android 4.3 will roll out some time this year for the SH-06E. You can upgrade it then. I might be able to help you with that but we'll see once the update comes out.
I did uninstall actually some apps but after when I restored the system everything was ok until I started to install google apps and the others. There may be some conflict. But obviously I'm not sure.
This phone is really pretty so perhaps I will not take a risk but who knows...
It would be nice if you could help me with installation of android 4.3. I have tired to find some information on Japanese websites, a there is some "img files" but those files are to small so perhaps it's not the system.
My build version is 1.00.07.
Kind regards
A little correction. I think I know what the problem is. I did not make an update of google keyboard and the problem gone. At this moment of course, after all day of using my Sharp. I hope this can be helpful for somebody.
Have you finally managed to get QPST worked?
I really want to use EDGE on my SH-06E but it seems that I have to enable it myself with QXDM.
I saw some Japaneses use HTC Diag driver on Xperia Z Ultra and it worked. Perhaps it would work with SH-06E.
hi there,
I just wondering, is it possible to upgrade to the latest (software/firmware/OS) SH-06E outside Japan? can I directly update just like ordinary android phone by OT using wifi?
thanks before
romeokk said:
Have you finally managed to get QPST worked?
I really want to use EDGE on my SH-06E but it seems that I have to enable it myself with QXDM.
I saw some Japaneses use HTC Diag driver on Xperia Z Ultra and it worked. Perhaps it would work with SH-06E.
Click to expand...
Click to collapse
Sorry but i don't know what QPST or QXDM is?
---------- Post added at 11:17 PM ---------- Previous post was at 10:32 PM ----------
wilto said:
hi there,
I just wondering, is it possible to upgrade to the latest (software/firmware/OS) SH-06E outside Japan? can I directly update just like ordinary android phone by OT using wifi?
thanks before
Click to expand...
Click to collapse
I'm afraid you can't do this.
tewilove said:
Temp root, and then run this it will allow DIAG.
Then setprop, see init.qcom.rc for details.
Click to expand...
Click to collapse
hello. did you find driver? and what to do with setprop?
Thanks
can u help me to enable diag mode for SH-10D
can u help me to enable diag mode for SH-10D without root!
How can I enable the DIAG mode in a 302SH? Already rooted, but unable to activate the DIAG mode so I can do a research in QPST? any tips?
---------- Post added at 12:47 PM ---------- Previous post was at 12:30 PM ----------
tewilove said:
Temp root, and then run this it will allow DIAG.
Then setprop, see init.qcom.rc for details.
Click to expand...
Click to collapse
What to do with Setprop? trying this in 302SH

[Q] i need your help! please read...

Hi. This is my question...
My wife found a galaxy s4 mini....
i have paid for imei unlock that phone.
Now its my phone.
(i know its not correct but i also lost a phone and never see it again, so please do not judge me)
can i use this phone like if i buy it ?
can i activate or allow android to see location of the phone, example: to be able to activate weather app ??
is it safe??
please help me here. Thanks.
If you found one the thing you should do is... on recovery full wipes and nothing more. Now the phone is like if you have bought new from any shop
Han5ixix1 said:
If you found one the thing you should do is... on recovery full wipes and nothing more. Now the phone is like if you have bought new from any shop
Click to expand...
Click to collapse
thank you for your answer .
So .... :
can i allow android to see location of the phone, to be able to activate weather app ??
is it safe??
xesp2 said:
thank you for your answer .
So .... :
can i allow android to see location of the phone, to be able to activate weather app ??
is it safe??
Click to expand...
Click to collapse
If you wiped everything it should be safe
thank you
Flatric said:
If you wiped everything it should be safe
Click to expand...
Click to collapse
thank you all for your help.

How to make my G4 look like a G5

Hello guys,
I've would like to know how to have the launcher (thème) of the G5 on my G4. Have the icons like the G5 would be nice!
Is it possible to do it without the root?
Flash Geneysis or Impuriam ROMS
ali.akbar01 said:
Flash Geneysis or Impuriam ROMS
Click to expand...
Click to collapse
Ok but i don't really know how to do!
Is it complicate to do it for the first time?
I found on the forum the Genisys Rom 4.9 is that one?
Is it work good?
shadow911 said:
Ok but i don't really know how to do!
Is it complicate to do it for the first time?
I found on the forum the Genisys Rom 4.9 is that one?
Is it work good?
Click to expand...
Click to collapse
I haven't used that myself but it does have UX 5 and all G5 UI perks. Have unlocked ur phone's bootloader?
ali.akbar01 said:
I haven't used that myself but it does have UX 5 and all G5 UI perks. Have unlocked ur phone's bootloader?
Click to expand...
Click to collapse
No, is not unlocked!
Is it necessary to root the phone?
Do u use it on your phone? if yes which one u use?
you can try 2 things from my friends .. and please push the thanks button on the dev if they help.. thats all they ask and deseserve.
how about G6 eeeh
i beleive they both say install as normal app dont forget to thank them not me.
https://forum.xda-developers.com/lg-g2/themes-apps/theme-lg-g5-original-icons-t3351025
https://forum.xda-developers.com/lg-g2/themes-apps/home-g6-ux6-ported-to-g2-t3577403
Work on a G4 because it's from the G2 forum?
It's only an icons pack or it's the launcher?
Any way to install UX5.0 on G4?
And what about this one? https://forum.xda-developers.com/g4/orig-development/bl-lock-ul-android-6-0-marshmallow-t3459260
Thanks for your answer!
Do you only need a theme? not a custom UX 5.0 rom....
So something like this then : https://drive.google.com/file/d/0B1oLfe5yO0TASk1KSmRxdjhnd00/view?usp=sharing
shadow911 said:
Work on a G4 because it's from the G2 forum?
It's only an icons pack or it's the launcher?
Any way to install UX5.0 on G4?
And what about this one? https://forum.xda-developers.com/g4/orig-development/bl-lock-ul-android-6-0-marshmallow-t3459260
Thanks for your answer!
Click to expand...
Click to collapse
That one is actually a non-rooted rom. The way it works is like flashing a normal LG TOT, just u must be on the version it requires first.
Just watch the tutorials there (and yes, there are) and try to understand what your supposed to do according to that.
Its a full G5 theme, rootless.
Also you wont be voiding your warranty cause you didnt do anything that "ruins" the warranty according to the actual warranty files
foxyfoxyblah said:
That one is actually a non-rooted rom. The way it works is like flashing a normal LG TOT, just u must be on the version it requires first.
Just watch the tutorials there (and yes, there are) and try to understand what your supposed to do according to that.
Its a full G5 theme, rootless.
Also you wont be voiding your warranty cause you didnt do anything that "ruins" the warranty according to the actual warranty files
Click to expand...
Click to collapse
OK, i don't want to root my phone anyway so that woukd be great, i prefer keep my warrantly safe & don't do anything that could "ruin" it!
But i'm not sure about "flashing a normal LG TOT" , what that mean?
When u talk about the version, it is v20a, v20c, etc ??
Do you know if it stable to use it?
And if i have any issue with this rom can i restore my phone to factory settings like i have right now?
Thanks for your help
waagbull said:
Do you only need a theme? not a custom UX 5.0 rom....
So something like this then : https://drive.google.com/file/d/0B1oLfe5yO0TASk1KSmRxdjhnd00/view?usp=sharing
Click to expand...
Click to collapse
Does it change icons also?
You don't have the post on the xda forum?
To see what it looks like!
shadow911 said:
OK, i don't want to root my phone anyway so that woukd be great, i prefer keep my warrantly safe & don't do anything that could "ruin" it!
But i'm not sure about "flashing a normal LG TOT" , what that mean?
When u talk about the version, it is v20a, v20c, etc ??
Do you know if it stable to use it?
And if i have any issue with this rom can i restore my phone to factory settings like i have right now?
Thanks for your help
Click to expand...
Click to collapse
So first thing, u need to be on version v20J, but it can be on any H815 variant.
Second of all, when i meant that its like any other TOT flash, you pretty much flash it in the same tool u flash V20J on, just you upgrade and not refurbish.
There is a tutorial in that thread, it may explain it better
And you do know how to use LG Flash Tool, right?
It`s just like installing a normal app and you can uninstall if you dont like and yes it does change the icons and also you get the G5 wallpapers. After you install it go into menu and then just change it under home screen (themes) then you will also get a preview before you apply it... :good:
shadow911 said:
Does it change icons also?
You don't have the post on the xda forum?
To see what it looks like!
Click to expand...
Click to collapse
waagbull said:
It`s just like installing a normal app and you can uninstall if you dont like and yes it does change the icons and also you get the G5 wallpapers. After you install it go into menu and then just change it under home screen (themes) then you will also get a preview before you apply it... :good:
Click to expand...
Click to collapse
Does it have the appdrawer with this thème?
Where did u found that thème link? On xda or somewhere else?
I didn't find it on the forum!
No, then you will have to get a custom rom that has ported the UX 5.0 , not just the visuals like this theme does...
I dont remember where I found it, its been a while since I downloaded it after searching both Xda and Google for new themes for the G4 as I tought the themes available in LG "store" was boring and more suitable for "kids" ..... So I searched around and found a bunch of different themes I liked and saved them
But just try it and You will see if you like it or not....... , it is easy to uninstall and will not do any "harm" to your phone :fingers-crossed:
But if You really want do customise your phone, I suggest You read up on the different ways to do it here on Xda , there are guides and descriptions of everything You need to know :good:
shadow911 said:
Does it have the appdrawer with this thème?
Where did u found that thème link? On xda or somewhere else?
I didn't find it on the forum!
Click to expand...
Click to collapse
foxyfoxyblah said:
So first thing, u need to be on version v20J, but it can be on any H815 variant.
Second of all, when i meant that its like any other TOT flash, you pretty much flash it in the same tool u flash V20J on, just you upgrade and not refurbish.
There is a tutorial in that thread, it may explain it better
And you do know how to use LG Flash Tool, right?
Click to expand...
Click to collapse
No i don't know how to use LG Flash tool but if you say that they are a tutorial i'll look at it.
I checked on my phone the version is v20i...
Any risk to change tue version?
shadow911 said:
No i don't know how to use LG Flash tool but if you say that they are a tutorial i'll look at it.
I checked on my phone the version is v20i...
Any risk to change tue version?
Click to expand...
Click to collapse
If you have any of the H815 variants (L/P/T/International [which means nothing after the H815] and etc) you shouldnt have an issue with the rollback. This isnt like with the carrier variants that block it.
Just make sure when you roleback on LG Flash Tool to click Refurbish on the KDZ, and not UPGRADE. I've made that mistake once = it equals soft brick, even though its MUCH easier to unbrick a non-rooted soft brick.
waagbull said:
No, then you will have to get a custom rom that has ported the UX 5.0 , not just the visuals like this theme does...
I dont remember where I found it, its been a while since I downloaded it after searching both Xda and Google for new themes for the G4 as I tought the themes available in LG "store" was boring and more suitable for "kids" ..... So I searched around and found a bunch of different themes I liked and saved them
But just try it and You will see if you like it or not....... , it is easy to uninstall and will not do any "harm" to your phone :fingers-crossed:
But if You really want do customise your phone, I suggest You read up on the different ways to do it here on Xda , there are guides and descriptions of everything You need to know :good:
Click to expand...
Click to collapse
Ok i'll try to see. I checked and i didn't find the thème on LG Store!
Yep i start reading on the forum how to custome my phone, that why i'm asking to u before to make sure!
I found this rom in the G4 section, if i'm sure i understand how to do i'll try https://forum.xda-developers.com/g4/orig-development/bl-lock-ul-android-6-0-marshmallow-t3459260
No root & bootlader needed..
foxyfoxyblah said:
If you have any of the H815 variants (L/P/T/International [which means nothing after the H815] and etc) you shouldnt have an issue with the rollback. This isnt like with the carrier variants that block it.
Just make sure when you roleback on LG Flash Tool to click Refurbish on the KDZ, and not UPGRADE. I've made that mistake once = it equals soft brick, even though its MUCH easier to unbrick a non-rooted soft brick.
Click to expand...
Click to collapse
Yes H815 variants... They are a video tuto in the description i think he explain how to do it!
shadow911 said:
Work on a G4 because it's from the G2 forum?
It's only an icons pack or it's the launcher?
Any way to install UX5.0 on G4?
And what about this one? https://forum.xda-developers.com/g4/orig-development/bl-lock-ul-android-6-0-marshmallow-t3459260
Thanks for your answer!
Click to expand...
Click to collapse
i use both.. only icons i installed normal other i put in rom zip... so its should work if it says normal apps.. yes icons and renzetti is launcher..

[Guide] Enable App Twin Feature on EMUI 5.0

Saw few users not having App Twin feature on various variant of 6X on EMUI 5.0. I found this trick on Honor 5C Facebook group shared by one of the user claiming this worked for him on rooted phone. I could not test this because I already have this feature on my phones so unable to verify but someone not having this feature on EMUI 5.0 can verify and report.
This needs a rooted phone with root enabled file explorer. (Root browser or ES file manager)
Go to this path:- system/emui/lite/prop/
backup this file - local.prop (copy and paste in internal storage or somewhere)
Now edit the original file under system/emui/lite/prop/ and make below changes.
fw.max_users=1 to 2
fw.show_multiuserui=0 to 1
ro.config.hw_support_clone_app=false to true.
Save the file and Reboot the phone.
Now check in settings option just below battery for app twin.
If it works, please share the feedback so that other users can get benefit of this and if doesn't work, we will explore more option to have this.
If you face any issue, just restore the original file from backup.
Good luck.
Success
Dazed No More said:
Success
Click to expand...
Click to collapse
Perfect.
It wasn't there earlier?
No. I have no need for it either so I removed it as well. Just wanted to test it for you since no one had responded:good:
Dazed No More said:
No. I have no need for it either so I removed it as well. Just wanted to test it for you since no one had responded:good:
Click to expand...
Click to collapse
Thanks for testing it mate.
Tested this feature and this will work 100% on Honor 6X on any region. Just follow the instruction mentioned in OP. I just did on BLN-L21 model (debranded today)
Just debranded from BLN-L22 to BLN-L21. Everything working fine. More details to follow soon.
For those, who were just curious to know if there will be OTA after debranding, you will get OTA after debranding without any issue. Just confirmed after debranding to BLN-L21. Got 2 updates in less than 30 minutes.
EDIT- Ignore this post. was posting in debranding guide thread but tab changed in a blink which I didnt notice.
shashank1320 said:
For those, who were just curious to know if there will be OTA after debranding, you will get OTA after debranding without any issue. Just confirmed after debranding to BLN-L21. Got 2 updates in less than 30 minutes.
EDIT- Ignore this post. was posting in debranding guide thread but tab changed in a blink which I didnt notice.
Click to expand...
Click to collapse
hey man you debranded to EU version, and you didn't told me,, is NFC working or not??
Khan ubaid said:
hey man you debranded to EU version, and you didn't told me,, is NFC working or not??
Click to expand...
Click to collapse
Sorry mate. I just had a file, oeminfo, to start and nothing else. Had to go with some trial and error.
NFC don't work.
Will post guide today. Was busy doing this and then restoring the phone for 7 hours yesterday.
shashank1320 said:
Sorry mate. I just had a file, oeminfo, to start and nothing else. Had to go with some trial and error.
NFC don't work.
Will post guide today. Was busy doing this and then restoring the phone for 7 hours yesterday.
Click to expand...
Click to collapse
ok you post, i will also try...
Khan ubaid said:
ok you post, i will also try...
Click to expand...
Click to collapse
Guide here https://forum.xda-developers.com/honor-6x/how-to/guide-successful-debranding-to-bln-t3701050
For HONOR 6x
and change
ro.config.hw_support_clone_app=false
to
ro.config.hw_support_clone_app=true
myyounes said:
For HONOR 6x
and change
ro.config.hw_support_clone_app=false
to
ro.config.hw_support_clone_app=true
Click to expand...
Click to collapse
Same was mentioned in OP mate
shashank1320 said:
Same was mentioned in OP mate
Click to expand...
Click to collapse
You have to change in your subject !
myyounes said:
You have to change in your subject !
Click to expand...
Click to collapse
Change to? Already mentioned a guide for the purpose
Just FYI. This guide worked, more or less, on a Huawei Enjoy 7 Plus (Nougat 7.0, Emui 5.1). Did I say "More or less"? yeah, I did.
It appeared "Aplicación gemela" new menu, just under the battery option in the settings menu ("twin app", in spanish). Problem is inside option, I only have option to replicate WeChat app. Okay, that is one of the two apps I'd like to clone (messaging app with logon based on phone number, and this phone is a 2-SIM one... personal and work). The other one is Whatsapp, also installed. But not appearing in menu for twinage.
So guide works, functionality in limited way.
Maybe it's due the mobile origin (China), the tuning I've made to it for getting gApps working (my god...), or maybe its due the whatsapp I've installed is the beta version? unsure.
XiaoMigue said:
Just FYI. This guide worked, more or less, on a Huawei Enjoy 7 Plus (Nougat 7.0, Emui 5.1). Did I say "More or less"? yeah, I did.
It appeared "Aplicación gemela" new menu, just under the battery option in the settings menu ("twin app", in spanish). Problem is inside option, I only have option to replicate WeChat app. Okay, that is one of the two apps I'd like to clone (messaging app with logon based on phone number, and this phone is a 2-SIM one... personal and work). The other one is Whatsapp, also installed. But not appearing in menu for twinage.
So guide works, functionality in limited way.
Maybe it's due the mobile origin (China), the tuning I've made to it for getting gApps working (my god...), or maybe its due the whatsapp I've installed is the beta version? unsure.
Click to expand...
Click to collapse
O so there is a seperate method given already in xda for cloning as many app as you want. This guide will just enable your phone for this feature. Let me give you link for the other guide.
shashank1320 said:
O so there is a seperate method given already in xda for cloning as many app as you want. This guide will just enable your phone for this feature. Let me give you link for the other guide.
Click to expand...
Click to collapse
Sorry, forgot to come and edit. I've already seen it. it's great info.
But in the end, Whatsapp doesn't works for me (ok, I didn't go trhough ABD but just modified XML file, whatsapp appears in menu, i can clone it, second icon appears in NOVA's app drawer, but it opens with the SAME configuration, it is not a different one... for wechat, it works)
It is no so important for me, so I'm not dedicating more time, just playing around a nice feature. If sometime in future i need it, maybe i will investigate more or use any app out there for cloning.
Thanks ^_^
XiaoMigue said:
Sorry, forgot to come and edit. I've already seen it. it's great info.
But in the end, Whatsapp doesn't works for me (ok, I didn't go trhough ABD but just modified XML file, whatsapp appears in menu, i can clone it, second icon appears in NOVA's app drawer, but it opens with the SAME configuration, it is not a different one... for wechat, it works)
It is no so important for me, so I'm not dedicating more time, just playing around a nice feature. If sometime in future i need it, maybe i will investigate more or use any app out there for cloning.
Thanks ^_^
Click to expand...
Click to collapse
Apps or WhatsApp must be updated. Also Khan posted one zip which can be used for many needed apps. Check in guide section of honor 6X

Galaxy Wearable App on Rooted Device

Hello,
I would like to know how to install the Galaxy Wearable app on my rooted Galaxy S9 (SM-G960F) running Lineage OS 15.1(-20190429-NIGHTLY-starlte), I have followed the instructions on every thread I could find numerous times and I'm still getting the following message:
Notice
The operating system on your phone has been modified in an unauthorised way, and is not compatible with the Samsung Gear app. Check your operating system and try again.
Any questions please feel free to ask and I will reply ASAP.
Use Magisk Hide.
rtakak said:
Use Magisk Hide.
Click to expand...
Click to collapse
I've tried this, multiple times and still get the same error.
same problem here with LOS 17.1, can't believe any dev here doesn't know how to bypass this... Tried to edit build.props, doesn't work..
CTShepherd said:
Hello,
I would like to know how to install the Galaxy Wearable app on my rooted Galaxy S9 (SM-G960F) running Lineage OS 15.1(-20190429-NIGHTLY-starlte), I have followed the instructions on every thread I could find numerous times and I'm still getting the following message:
Notice
The operating system on your phone has been modified in an unauthorised way, and is not compatible with the Samsung Gear app. Check your operating system and try again.
Any questions please feel free to ask and I will reply ASAP.
Click to expand...
Click to collapse
jaroulz said:
same problem here with LOS 17.1, can't believe any dev here doesn't know how to bypass this... Tried to edit build.props, doesn't work..
Click to expand...
Click to collapse
this is a build.prop issue
jaroulz, what did you change in the build.prop? You basically need to tell the watch that its not a samsung device. I always chose HTC in the alternate build.prop choices and it worked 100% of the time
It's all sorted now mate, I used the props mod from Magisk in order to modify the file build.props following the tutorial posted by EvilWayz in a different thread.
jaroulz said:
It's all sorted now mate, I used the props mod from Magisk in order to modify the file build.props following the tutorial posted by EvilWayz in a different thread.
Click to expand...
Click to collapse
word. glad its sorted!
Youdoofus said:
word. glad its sorted!
Click to expand...
Click to collapse
It might be a stupid question but once I've done all of this and managed to start the Samsung app, can I revert the file build.props to what is was before? Or does it need to stay like this forever? Using the Magisk Props Mod, how do I revert back to the original build.props file? Is there any backup file somewhere?
jaroulz said:
It might be a stupid question but once I've done all of this and managed to start the Samsung app, can I revert the file build.props to what is was before? Or does it need to stay like this forever? Using the Magisk Props Mod, how do I revert back to the original build.props file? Is there any backup file somewhere?
Click to expand...
Click to collapse
no stupid questions man! if you revert, itll likely crop back up as a problem. Its been a while since ive had to deal with it, but im thinking its a bad idea to revert
jaroulz said:
It might be a stupid question but once I've done all of this and managed to start the Samsung app, can I revert the file build.props to what is was before? Or does it need to stay like this forever? Using the Magisk Props Mod, how do I revert back to the original build.props file? Is there any backup file somewhere?
Click to expand...
Click to collapse
The tima secure needs to stay the same.
Thats all we used to modify was ro.tima.secure from 1 to 0
TheMadScientist said:
The tima secure needs to stay the same.
Thats all we used to modify was ro.tima.secure from 1 to 0
Click to expand...
Click to collapse
could you be a bit more explicit? what is this value for?
jaroulz said:
could you be a bit more explicit? what is this value for?
Click to expand...
Click to collapse
Don't really know. But that's how we modded a rooted system to get health and wear to work
TheMadScientist said:
Don't really know. But that's how we modded a rooted system to get health and wear to work
Click to expand...
Click to collapse
ok so only by changing this value to 0, you get Samsung app to work on a Galaxy phone?
jaroulz said:
ok so only by changing this value to 1, you get Samsung app to work on a Galaxy phone?
Click to expand...
Click to collapse
Changing it to 0 will allow shealth yo work on a rooted device sorry. Which imo is part of wearable. Since i use both togethor
Of you already flashed a build prop tweak it may be done. But in the past this was all we needed
If you google it. There are loads of pages on it
TheMadScientist said:
Changing it to 0 will allow shealth yo work on a rooted device sorry. Which imo is part of wearable. Since i use both togethor
Of you already flashed a build prop tweak it may be done. But in the past this was all we needed
If you google it. There are loads of pages on it
Click to expand...
Click to collapse
alright, not sure if it works tho coz i haven't try it but yes i did edit my build.props and everything is fine now.
jaroulz said:
It's all sorted now mate, I used the props mod from Magisk in order to modify the file build.props following the tutorial posted by EvilWayz in a different thread.
Click to expand...
Click to collapse
Hey jaroulz, I've tried changing samsung to htc in 4 different places in build.prop but no joy for me, is that all you did? FWIW I'm on s10e with LOS 17.1 so might be something additional that I have to do.
Also no sign of that ro.tima.secure entry on mine.
jonmoz said:
Hey jaroulz, I've tried changing samsung to htc in 4 different places in build.prop but no joy for me, is that all you did? FWIW I'm on s10e with LOS 17.1 so might be something additional that I have to do.
Also no sign of that ro.tima.secure entry on mine.
Click to expand...
Click to collapse
Have a look here mate
https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228/page271
jaroulz said:
Have a look here mate
https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228/page271
Click to expand...
Click to collapse
Perfect thanks, all paired up!

Categories

Resources