Folks,
Can you please help me on my Samsung Tab 3 SM-T210, I've been trying to fix it for days now the steps that I have done is flashing it to a stock rom T210XXAMG7_T210XSAAMG1_T210XXAMG7_HOME.tar.md5 using odin v3.07 I followed all the steps that I found on the internet and nothing happens it shows PASS! in odin though. I think the problem maybe is I can't get the device into the download mode, tried holding power volume up and home button all at the same time and it goes right back to the firmware upgrade encountered an error.
ODIN MODE
PRODUCT NAME: SM-T210
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
HW REV: 0x5
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T210XXAMG7_T210XSAAMG1_T210XXAMG7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> PBL.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> NVM.img
<ID:0/004> radio.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> PBL.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> NVM.img
<ID:0/004> radio.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
If you have further insight please let me know.
Thanks,
BesterEM
you must repair ur tab with jtag z3x or other emmc box...so ur boot emmc is corupted and u must repair it
Related
When I try to flash CWM or TWRP Odin says PASS but my tablet just reboots and no recovery is installed. I have installed Kies on my PC and successfully used CF-Auto-Root but recovery just won't install.
If it helps, this is the message from Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Anyone knows what I'm doing wrong? Total noob here :silly:
What is the device
Sorry for my ignorance, but can you tell me what is your device actually? I'm bit confused about "N1150."
Trying to install back to default Samsung galaxy note 2. It had Cyanogen on it, I just tried to wipe it back to normal and this is the error I get. I have a Samsung Galaxy Note 2 on AT&T. Can anyone help on how to get around this?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Last Night my Note2 finally got the 4.4 upgrade which I let install. Upon waking up I was greeted with my phone staying on the Samsung logo (it was doing the glowing animation both on the logo and the LCD so it wasn't frozen as far as I know). I've been trying all day to get it to work, I even tried flashing the Stock rom (KIES_HOME_L900VPAMC2_L900SPTAMC2_1090526_REV04_user_low_ship.tar.md5) via ODIN v3.07, unfortunately I keep getting the following when I try to flash the recovery:
<OSM> KIES_HOME_L900VPAMC2_L900SPTAMC2_1090526_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I've also tried Samsungs Kies Software and I haven't had any luck.
Can someone please help or at least point me in the right direction?
Any help is very appreciated.
Thank you so much
4.4.2 odin .tar file is available now:
http://forum.xda-developers.com/showthread.php?t=2780984
916
DaniLuv said:
Last Night my Note2 finally got the 4.4 upgrade which I let install. Upon waking up I was greeted with my phone staying on the Samsung logo (it was doing the glowing animation both on the logo and the LCD so it wasn't frozen as far as I know). I've been trying all day to get it to work, I even tried flashing the Stock rom (KIES_HOME_L900VPAMC2_L900SPTAMC2_1090526_REV04_user_low_ship.tar.md5) via ODIN v3.07, unfortunately I keep getting the following when I try to flash the recovery:
<OSM> KIES_HOME_L900VPAMC2_L900SPTAMC2_1090526_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I've also tried Samsungs Kies Software and I haven't had any luck.
Can someone please help or at least point me in the right direction?
Any help is very appreciated.
Thank you so much
Click to expand...
Click to collapse
Michael just helped me out in this thread I made, having the same issue as you. That fix.tar really helps! Just read his post in this thread: http://forum.xda-developers.com/showthread.php?t=2780409
hi guys
i flashed stock firmware but odin failed midway... tab s shows the yellow triangle and "encountering an issue". i couldnt recover with kies. it also fails.
there's odin's log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T805XXU1BOCC_T805VFG1BOC4_T805XXU1BOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i can access download mode. i can't download another rom cuz it took a week to download this one!! anyone can help me?
This is common when you flash a firmware not for your region. Easy fix, just boot to recovery and wipe cache then reboot. Everything should be fine after that.
Hello guys,
My S4 mini (GT-I9195) is restarting after the Samsung GalaxyS4mini GT-I9195 screen.
I can enter Odin mode. I can update firmware. see below log from Odin.
After that, phone enters recovery mode and restarts and i'm back at the begining.
Any ideas?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> NON-HLOS.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Hello razvanells. Sorry for taking advantage of your topic, but I'm having the same problem as you.
This also happened with the S4 Mini (but I9192 version) of a my friend. This device had no root and had a stock rom. He hung up and did not turn on anymore, locking on the screen Samsung Galaxy S4 Mini I9192. I downloaded the stock rom from the sammobile site and installed it by Odin. The log I received was identical to yours, saying that the installation occurred successfully, but when the device reboots it goes to recovery mode and it does not start, I can only enter the download or recovery mode.
I tried the hard reset and received the following error:
Formatting / data ...
E: format_volume: make_extf4fs failed on /dev/block/platform/msm_sdcc.1/by-name/userdata
Formating / cache ...
E: format_volume: make_extf4fs failed on /dev/block/platform/msm_sdcc.1/by-name/cache
Data wipe complete.
Click to expand...
Click to collapse
I tried to recover the stock rom using Kies but it did not work either.
After a lot of research on google, I found a guy saying he was able to recover a smartphone using TWRP and formatting the memory in FAT and then reformatting it to EXT4 (at that link: http://forums.androidcentral.com/t-...850-encrypted-phone-freezes-when-turning.html).
I tried to install TWRP by Odin, which according to the log occurred perfectly, but after restarting the device the Android default recovery was there (even entering the recovery mode as soon as the phone rebooted).
I tried to install the CWM for Odin, and so it was. Odin's log said it was successful but when the phone was rebooted there was the default Android recovery again (even entering the recovery mode as soon as the phone rebooted).
I have no more ideas, and I wanted to ask if anyone knows how to solve this?
Thank you.
razvanells said:
Hello guys,
My S4 mini (GT-I9195) is restarting after the Samsung GalaxyS4mini GT-I9195 screen.
I can enter Odin mode. I can update firmware. see below log from Odin.
After that, phone enters recovery mode and restarts and i'm back at the begining.
Any ideas?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> NON-HLOS.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
même problème que vous