L710t Android system update - Sprint Samsung Galaxy S III

Just got this android system update on my rooted galaxy s3 triband l710t model. Does anyone know what this is? Its 106mb. Just dont wanna install if it updates baseband and then maybe wont have a full restore tar like nj3. So if I deleted this out of system/cache/update.zip will it get rid of the annying popup in my notifications?
Sent from my SPH-L710T using XDA Free mobile app

Maybe lollipop?

If it were lollipop it would be a lot bigger
Probably just some misc bug fixes

CNexus said:
If it were lollipop it would be a lot bigger
Probably just some misc bug fixes
Click to expand...
Click to collapse
yea that's true duh! I should've thought of that thanks a lot

I hust took an update on vm710t and my baseband is now oa3. Thats the first time i have seen this one

pbailey212 said:
I hust took an update on vm710t and my baseband is now oa3. Thats the first time i have seen this one
Click to expand...
Click to collapse
have you noticed anything good?

6th_Hokage said:
have you noticed anything good?
Click to expand...
Click to collapse
Nothing that i noticed. I just got this phone as a replacement and took the update a few hours later. Its been so long since i have ran stock tw, i cant tell if anything is different.

pbailey212 said:
Nothing that i noticed. I just got this phone as a replacement and took the update a few hours later. Its been so long since i have ran stock tw, i cant tell if anything is different.
Click to expand...
Click to collapse
i see and if it follows the pattern Odin NF4 and it will brick :/

is there anyway i could get a copy of a flashable modem or odin for the aoa update?......i had that same update and i accidently flashed cm11 wich changed my modem before i got a chance to back it up and now im stuck with a brand new phone that says unkown baseband/modem....no phone signal at all or wifi......i was looking for a full odin of the new update to fix my phone but only found ndc thus far.... or at the very least if you could pull the modem for me to flash or point me in the right direction to fix my gs3 id be very very gratefull.

emceeskwaird said:
is there anyway i could get a copy of a flashable modem or odin for the aoa update?......i had that same update and i accidently flashed cm11 wich changed my modem before i got a chance to back it up and now im stuck with a brand new phone that says unkown baseband/modem....no phone signal at all or wifi......i was looking for a full odin of the new update to fix my phone but only found ndc thus far.... or at the very least if you could pull the modem for me to flash or point me in the right direction to fix my gs3 id be very very gratefull.
Click to expand...
Click to collapse
did you take the OA3 update?

i did install it...then like a dumby installed cm11 and it borked my modem/baseband ....if you could post a flashable modem zip or a odin file of the new firmware to help me out id be very gratefull.

Related

[Q] Stock T-Mobile Image and Baseband

Anyone have these yet by chance?
I am sure it is coming. I would like to get my hands on it also.
Would be nice to have as I've already screwed it up.
liquidblue1985 said:
Would be nice to have as I've already screwed it up.
Click to expand...
Click to collapse
did you flash the n7100 stock firmware?
JoJo2211 said:
did you flash the n7100 stock firmware?
Click to expand...
Click to collapse
Nope. Downloading that right now actually. The only issue I'm having is that it's not recognizing the baseband.
It would be nice to be able to flash the Tmobile modem.
gedster314 said:
It would be nice to be able to flash the Tmobile modem.
Click to expand...
Click to collapse
Yeah. I'm pretty much stuck at this point. I have a custom recovery installed, root and on an international rom but I cannot get cell service. Wifi works, but that's about it.
I believe it has to do with the isis security.
Was thinking about going to TMO and getting a non-isis sim card to try.
liquidblue1985 said:
Yeah. I'm pretty much stuck at this point. I have a custom recovery installed, root and on an international rom but I cannot get cell service. Wifi works, but that's about it.
Click to expand...
Click to collapse
+1 I need the modem or a stock tar to odin asap, hope it drops soon...
The non-ISIS sim card did not change anything.
Looks like I need the stock rom also.
:/
luser01 said:
I believe it has to do with the isis security.
Was thinking about going to TMO and getting a non-isis sim card to try.
Click to expand...
Click to collapse
If anyone can help out with getting a flashable radio for this it'd be greatly appreciated. I've looked around on how to extract the radio from the current version with no luck.
As far as the ROM, a user linked one here:
http://forum.xda-developers.com/showpost.php?p=33242968&postcount=67
I've restored that through custom recovery/nandroid and it works fine. But without the radio... I'm lost.
I get a MD5 mismatch when I try to restore it with nandroid.
Downloaded it twice. anyone else had luck?
liquidblue1985 said:
If anyone can help out with getting a flashable radio for this it'd be greatly appreciated. I've looked around on how to extract the radio from the current version with no luck.
As far as the ROM, a user linked one here:
http://forum.xda-developers.com/showpost.php?p=33242968&postcount=67
I've restored that through custom recovery/nandroid and it works fine. But without the radio... I'm lost.
Click to expand...
Click to collapse
luser01 said:
I get a MD5 mismatch when I try to restore it with nandroid.
Downloaded it twice. anyone else had luck?
Click to expand...
Click to collapse
Had the same thing. Best bet is to go into the md5 file with a text editor and just delete everything and save the file. Recopy the md5 file over and reflash. Not sure why it was causing this error because I even re-ran the md5's myself and they were the same.
Also, just got off the phone with Samsung, they pretty much said the phone is not in their system yet and they do not have access to the firmware at this point. Their suggestion was to go back to t-mobile and get an exchange unit.
I will try that..
I called Samsung last night and they gave me the same run around.
liquidblue1985 said:
Had the same thing. Best bet is to go into the md5 file with a text editor and just delete everything and save the file. Recopy the md5 file over and reflash. Not sure why it was causing this error because I even re-ran the md5's myself and they were the same.
Also, just got off the phone with Samsung, they pretty much said the phone is not in their system yet and they do not have access to the firmware at this point. Their suggestion was to go back to t-mobile and get an exchange unit.
Click to expand...
Click to collapse
Just hoping now that maybe someone with enough knowledge sees this and can extract a flashable baseband... I'd really hate to go and buy another unit.
liquidblue1985 said:
Just hoping now that maybe someone with enough knowledge sees this and can extract a flashable baseband... I'd really hate to go and buy another unit.
Click to expand...
Click to collapse
You should find a store with one on the shelf, and not much supervision... and root it/extract a nand image hehehe. Though that would mean you would have be able to do all that and I have no idea how to extract a baseband image that is the power of the xda dev gods!
How hard is it to extract a baseband image?
Could someone that has one do it easily?
MikeBrWade said:
You should find a store with one on the shelf, and not much supervision... and root it/extract a nand image hehehe. Though that would mean you would have be able to do all that and I have no idea how to extract a baseband image that is the power of the xda dev gods!
Click to expand...
Click to collapse
I'm not sure if this is what you're looking for in particular buuut...
http://forum.xda-developers.com/showthread.php?t=1954597
It was (and still is) posted on the N7100 dev forum. It's the T-Mobile boot.img in tar format. Read through the thread for more info.
That is for people that messed up the rooting.
I flashed a full ITL rom that had the modem in it.
All I need is the modem and I am good to go.
/Waits
anoneemooz said:
I'm not sure if this is what you're looking for in particular buuut...
http://forum.xda-developers.com/showthread.php?t=1954597
It was (and still is) posted on the N7100 dev forum. It's the T-Mobile boot.img in tar format. Read through the thread for more info.
Click to expand...
Click to collapse
luser01 said:
That is for people that messed up the rooting.
I flashed a full ITL rom that had the modem in it.
All I need is the modem and I am good to go.
/Waits
Click to expand...
Click to collapse
Oh so wait. You're using a T-Mobile Note 2 and managed to flash an international ROM with everything working and functional (except for signal/sms/data/call) ? No reboots?
I ask because I've been wanting to somehow "convert" my T-Mobile Note 2 to an international Note 2 (as in, be able to flash the updates the international version gets instead of waiting on T-Mobile). I'm not US based so I don't need it to work with T-Mobile SIM anyhow...

[Q] what files are right to flash?

so i have been working on my friends phone for a while now and cant get anything to flash to it.after an ota update it bricked.i tried to redo his phone because he did not have insurance and it wasnt under warranty.but i tried everything on here and i get nothing odin says no pit partition sometimes so i tried finding a fix for that.but after reading on here yesterday im wondering if im flashing the wrong sprint s3 files.are the files the same for the android it came with and the ota it got 2weeks ago? im guessing it was 4.2 and the ota was 4.3 since thats what was rolling out to the phones
gjmath01 said:
so i have been working on my friends phone for a while now and cant get anything to flash to it.after an ota update it bricked.i tried to redo his phone because he did not have insurance and it wasnt under warranty.but i tried everything on here and i get nothing odin says no pit partition sometimes so i tried finding a fix for that.but after reading on here yesterday im wondering if im flashing the wrong sprint s3 files.are the files the same for the android it came with and the ota it got 2weeks ago? im guessing it was 4.2 and the ota was 4.3 since thats what was rolling out to the phones
Click to expand...
Click to collapse
Have you read THIS thread about Knox?
yes i can get to dl mode at first when i got it that was all i can do then i flashed files with oden and it went away i guess it soft bricked it but i built a jig and it was now without the jig.... just wondering if i need to use mk3 files not md4
If mk3 OTA was accepted Knox will not allow any previous versions to install... as I understand it
Sent from my SCH-L710 using Tapatalk
Saiya69 said:
If mk3 OTA was accepted Knox will not allow any previous versions to install... as I understand it
Sent from my SCH-L710 using Tapatalk
Click to expand...
Click to collapse
Correct
yes just from getting caught up in reading all the thrds and post about rooting and flashing and sd booting s3 it did not cross my mind that 4.3 changed how it all works.for some reason it hit me so i asked him if it took the update and he said yes it worked for 3days..so im back to square one just different version but ill find it all i think i spend more time here and i do at work lol @ joey thanks bud looking at i now
gjmath01 said:
yes just from getting caught up in reading all the thrds and post about rooting and flashing and sd booting s3 it did not cross my mind that 4.3 changed how it all works.for some reason it hit me so i asked him if it took the update and he said yes it worked for 3days..so im back to square one just different version but ill find it all i think i spend more time here and i do at work lol @ joey thanks bud looking at i now
Click to expand...
Click to collapse
Keep up with that thread, Once CNexus gets the tar, he'll get it going
thanks a lot it explains exactly what is wrong with it.i seen post about knox but never really gave much info. sounds good to me ill wait for CNex to release his fine work
gjmath01 said:
thanks a lot it explains exactly what is wrong with it.i seen post about knox but never really gave much info. sounds good to me ill wait for CNex to release his fine work
Click to expand...
Click to collapse
Did this phone have custom recovery or stock before he took the OTA?
EDIT: nevermind, it doesn't matter.
no it was stock unrooted.

[Q] IMEI says 0 on 4.4.1

Hey guys, I think I screwed up. I think that I lost my IMEI through flashing it and I didn't make a back up. It says 0 and only very few of the *# codes work, the *#7285# and #22745927 codes do absolutely nothing and the only one that I know of that works is *#*#4636#*#* which doesn't help me at all. Most programs that I use don't detect the phone correctly or my phones just downright wrecked. Example is DFS says CPS N/A in every section and Samsung MEID Repair says "Unhandled exception has occurred in your application" when I try to connect it to my phone.
I'm running CM11 4.4.1 and I had the problem when I was running a 4.3 ROM. Also I have data and I can make calls. Its just that I cant send MMS and I drop to edge over time and stay on edge until I restart.
Any help would be greatly appreciated. Everyone I call is saying it'll cost $65 - $75 IF they can even fix it.
Try to use nv writer to inject the imei.
http://forum.xda-developers.com/showthread.php?t=1804117
Note that if you reinject IMEI, it might screw up your network
audit13 said:
Try to use nv writer to inject the imei.
http://forum.xda-developers.com/showthread.php?t=1804117
Click to expand...
Click to collapse
I wish I could, When I try to use it, it says "Failed.. phone does not answer". Keep in mind that *#7284# doesnt do anything at all.
Did you know that you need to be completely stock in order to use the code?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
pcshano said:
Did you know that you need to be completely stock in order to use the code?
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
I did not. That helps a LOT. Thank you so much. I havent tried going back yet, I'm gonna be more cautious about what i do now. Can I go back to stock from CM11 4.4.1 without screwing anything up? I keep seeing that you cant downgrade. Is that the case or is it just the case with official android roms?
Thank you so much, I feel like with your help I may be able to fix this. What im thinking that I have to do (I'll wait for your opinion) is that I should flash to stock, use the nv reader/writer, then ill be able to reroot it? When you say that it could screw up the network, what exactly do you mean?
chasetacos said:
I did not. That helps a LOT. Thank you so much. I havent tried going back yet, I'm gonna be more cautious about what i do now. Can I go back to stock from CM11 4.4.1 without screwing anything up? I keep seeing that you cant downgrade. Is that the case or is it just the case with official android roms?
Thank you so much, I feel like with your help I may be able to fix this. What im thinking that I have to do (I'll wait for your opinion) is that I should flash to stock, use the nv reader/writer, then ill be able to reroot it? When you say that it could screw up the network, what exactly do you mean?
Click to expand...
Click to collapse
I'm not sure what bootloader are you using
but IF your phone is fully unlocked, it doesn't matter, just flash 4.3 Stock and you're good to go
check out this post if you need help getting back to stock http://forum.xda-developers.com/showthread.php?t=2658486
the reason why you see people keep saying you can't "Downgrade" is mostly due to the bootloader you have, and it only apply to if and only if you're downgrading from MJB bootloader to a older version of Touchwiz (ie. Touchwiz 4.3 which will obviously come with MJB, thus you can't downgrade to 4.2 or 4.1 versions of touchwiz), not AOSP. if you're on AOSP in which CM is one, yes you can go from one AOSP to another, but no one does it because most of the time newer > older =D
pcshano said:
I'm not sure what bootloader are you using
but IF your phone is fully unlocked, it doesn't matter, just flash 4.3 Stock and you're good to go
check out this post if you need help getting back to stock http://forum.xda-developers.com/showthread.php?t=2658486
the reason why you see people keep saying you can't "Downgrade" is mostly due to the bootloader you have, and it only apply to if and only if you're downgrading from MJB bootloader to a older version of Touchwiz (ie. Touchwiz 4.3 which will obviously come with MJB, thus you can't downgrade to 4.2 or 4.1 versions of touchwiz), not AOSP. if you're on AOSP in which CM is one, yes you can go from one AOSP to another, but no one does it because most of the time newer > older =D
Click to expand...
Click to collapse
Cool. Im using CWM 6.0.4.3. Youre saying flash back to stock, then use the codes and the NV reader/writer? Also, when using the ZIP. am I using this through CWM "install zip"?
chasetacos said:
Cool. Im using CWM 6.0.4.3. Youre saying flash back to stock, then use the codes and the NV reader/writer? Also, when using the ZIP. am I using this through CWM "install zip"?
Click to expand...
Click to collapse
Yes.
but again you might want to update it to latest version since according to this http://forum.xda-developers.com/showthread.php?t=2658486, he mentioned version 6.0.4.5 and 6.0.4.7 though he didn't say if it's necessary to be but to be safe, you should so that you won't run into any issues.
though again, let me warn you, Reinjecting your IMEI, will work, BUT at the same time, it might screw up with your broadband
I experienced it once with one of my S3 and it stuck on either E or G network.. and I had to fix it by copy my efs folder to that phone in order to fix(and unless you have a good friend with S3 phone with same model, or own more than 1 S3, you won't be able to do it since nobody want to share, apply to me as well)
pcshano said:
Yes.
but again you might want to update it to latest version since according to this http://forum.xda-developers.com/showthread.php?t=2658486, he mentioned version 6.0.4.5 and 6.0.4.7 though he didn't say if it's necessary to be but to be safe, you should so that you won't run into any issues.
Click to expand...
Click to collapse
Cool. I Will do this and I will keep you updated. Itll be just a few moments before I complete the process
pcshano said:
Yes.
but again you might want to update it to latest version since according to this http://forum.xda-developers.com/showthread.php?t=2658486, he mentioned version 6.0.4.5 and 6.0.4.7 though he didn't say if it's necessary to be but to be safe, you should so that you won't run into any issues.
though again, let me warn you, Reinjecting your IMEI, will work, BUT at the same time, it might screw up with your broadband
I experienced it once with one of my S3 and it stuck on either E or G network.. and I had to fix it by copy my efs folder to that phone in order to fix(and unless you have a good friend with S3 phone with same model, or own more than 1 S3, you won't be able to do it since nobody want to share, apply to me as well)
Click to expand...
Click to collapse
So when I try to flash the stock I get an error status 7. Any advice?
chasetacos said:
So when I try to flash the stock I get an error status 7. Any advice?
Click to expand...
Click to collapse
funny a lot of people who use CWM got this error when trying to get back to stock lol
try TWRP.. it should definitely fix it
Cool. It may not be till tonight or tomorrow till I respond, I'm about to have a project m competition. I'll let you know how it goes as soon as I get a chance.
pcshano said:
funny a lot of people who use CWM got this error when trying to get back to stock lol
try TWRP.. it should definitely fix it
Click to expand...
Click to collapse
So now that Ive restored to stock, I have a transparent window with yellow text in it. it reads a bunch of info on the phone. It also said that it was in factory mode?
pcshano said:
funny a lot of people who use CWM got this error when trying to get back to stock lol
try TWRP.. it should definitely fix it
Click to expand...
Click to collapse
So despite being stuck in factory mode I was able to write the NV and luckily I dont have any new network problems as far as I know. However my IMEI now says / 00 and in the phone info it says "unknown"
So this is my progress so far. I have made connection with the NV items reader and I have saved the NV file. when i rewrote it i noticed that my imei is / 00 and it says unknown in the phone info. I have my imei and my converted imei and i was going to insert it into line 00550 but that line says "00550 (0x0226) - Inactive item". Factory mode is still on, I have edited the text files for both factory mode and keystr from ON to OFF and back again rebooting my phone each time and getting no result.
So im stuck in factory mode with / 00 imei. I can however make connection with programs now, I feel like im moving forward.
I feel like it may be worth noting that ive never ever seen a nv_data.bin in my phone....
chasetacos said:
So this is my progress so far. I have made connection with the NV items reader and I have saved the NV file. when i rewrote it i noticed that my imei is / 00 and it says unknown in the phone info. I have my imei and my converted imei and i was going to insert it into line 00550 but that line says "00550 (0x0226) - Inactive item". Factory mode is still on, I have edited the text files for both factory mode and keystr from ON to OFF and back again rebooting my phone each time and getting no result.
So im stuck in factory mode with / 00 imei. I can however make connection with programs now, I feel like im moving forward.
I feel like it may be worth noting that ive never ever seen a nv_data.bin in my phone....
Click to expand...
Click to collapse
make sure that you take your SIM out before injecting imei... then try again
and nv_data.bin is in your efs folder which you can only see it if you have some sort of root explorer
pcshano said:
make sure that you take your SIM out before injecting imei... then try again
and nv_data.bin is in your efs folder which you can only see it if you have some sort of root explorer
Click to expand...
Click to collapse
Still nothing, im getting the same result. This Nv data bin file is not in there. i mean, unless i dont know where to look, but ive checked the whole EFS folder and its not in there...
Hi try flash UCUEMJB 4.3 stock rom via odin .. I have same problem and the stock ROM fix my problem
Sent from my GT-P5113 using XDA Premium 4 mobile app
---------- Post added at 06:24 PM ---------- Previous post was at 06:06 PM ----------
I fix mine with this .....
Ok... I hated to see the posts about the tar file bricking a couple of phones. I had taken it down so not to brick anyone else's phone. But with over 400 downloads and only 2 reports I feel that it was fine, but in either case I have redone it. I have flashed it many many time now and my phone is fine.
Please only use Odin 3.0.7 http://forum.xda-developers.com/showthread.php?t=1722686
Make sure Auto Reboot and Re-Partition are checked. Uncheck F. Reset Time and anything else that might be checked.
Check and load the file in the PDA slot.
Start Flash and wait till it the phone reboots.
I747UCUEMJB 4.3 Odin flashable tar.
http://www.androidfilehost.com/?fid=23329332407590581
Sent from my GT-P5113 using XDA Premium 4 mobile app
elcocolo50 said:
Hi try flash UCUEMJB 4.3 stock rom via odin .. I have same problem and the stock ROM fix my problem
Sent from my GT-P5113 using XDA Premium 4 mobile app
---------- Post added at 06:24 PM ---------- Previous post was at 06:06 PM ----------
I fix mine with this .....
Ok... I hated to see the posts about the tar file bricking a couple of phones. I had taken it down so not to brick anyone else's phone. But with over 400 downloads and only 2 reports I feel that it was fine, but in either case I have redone it. I have flashed it many many time now and my phone is fine.
Please only use Odin 3.0.7 http://forum.xda-developers.com/showthread.php?t=1722686
Make sure Auto Reboot and Re-Partition are checked. Uncheck F. Reset Time and anything else that might be checked.
Check and load the file in the PDA slot.
Start Flash and wait till it the phone reboots.
I747UCUEMJB 4.3 Odin flashable tar.
http://www.androidfilehost.com/?fid=23329332407590581
Sent from my GT-P5113 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately that did nothing . I might just have to cry about it

[Q] Havent been able to load new roms after having to fix soft brick

First off I NEVER have had rom issues before this, it all started with a failed encryption attempt that soft bricked my phone. instead of re posting what i wrote here is a link to the 2 pg thread in which i received help and thus this is where i am at.
http://forum.xda-developers.com/showthread.php?t=2701706
OK now ever since then i have never been able to update to a new rom. I believe it let me do it once and i believe i am using an older version of S3Rx.
I believe it may be due to how I updated to 4.3 I would like to get 4.4 as i believe kit kat (tell me if im wrong) will probably be the last android os the S3 will support so i basically want to get the most out of it as i can and also be able to try other roms in general like i used to. Because i currently do not have a sd card I have yet to try anything drastic as i normally use my sd card for backups and rom installs because if something happens to the phone i have the sd card backup.
So in all What should I DO, I have fears of using Odin as the one time it failed on me i bricked a phone and I cant really afford to hard brick this one like i did the other. Although the only thing I can think of being a dumb leach user and non dev. Would be to use odin with the most recent root66 then go from there? Although again lol all i can think of is the above.
Thanks for reading and i hope like the last time I will recieve help to bring back the life to this device. TIA!!
Can you give a little more info on why you can't flash, like an error message or something?
serio22 said:
Can you give a little more info on why you can't flash, like an error message or something?
Click to expand...
Click to collapse
for some reason using twrp and cwm they fail with twrp it normally fails instantly and with cwm it will fail sometime during the install.
I need to put a rom on my phone and ill give exact error. I havce been trying to use the likewise port from att http://forum.xda-developers.com/galaxy-s3-t-mobile/development/rom-likewise-s5-4-1-tw-4-4-2-ne4-t2879647 I normally use an sd card as i have the 12gb model and some roms are large but i should still be able to succeed (we will see from the error message)
thanks for replying
Alright. Also make sure you are using the latest recoveries
serio22 said:
Alright. Also make sure you are using the latest recoveries
Click to expand...
Click to collapse
HRM i guess im ok i just installed the latest S3Rx as i wanted to see what made it stop so i chose this rom (because i needed to update anyway) and it had aroma so I thought perfect ill know when it fails but it worked out ive downloaded and tried to install likewise several time at first i thought i got a bad download but ive tried again and for some reason. I have yet to try a 4.4 (i wanted to try likewise so thats why i chose it) so without trying other roms my issue has something to do with going to 4.4 from 4.3 IDK though as i have not tried other roms but no one else seams to have this issue with this rom port?
Any 4.4 rom suggestion to try to find out what the issue is?
currently installed base-band modem should have no impact on rom installation only the fact i wont get signal right?
I just cant think of any reason why i am having the issue?? any ideas anything i should check to make sure its right on my mobile? BTW thanks for coming back to help as this is possibly a stupidity problem which is hard to help how do you help stupid lol?
Try S3rx 4.4.2 or do you mean aosp/cm?.. And correct, baseband/modem won't matter on ROM installation.. I'm sure it's not stupidity, believe me we all get issues we cannot understand at times and the next time you try, problem is gone lol
serio22 said:
Try S3rx 4.4.2 or do you mean aosp/cm?.. And correct, baseband/modem won't matter on ROM installation.. I'm sure it's not stupidity, believe me we all get issues we cannot understand at times and the next time you try, problem is gone lol
Click to expand...
Click to collapse
i personally prefer touchwiz so no aosp or cm and the latest version of s3Rx i though is what i just installed but its only 4.3 not 4.4
http://forum.xda-developers.com/showthread.php?t=2326763
installing that works but i still cant get to 4.4 im going to search for one that has aroma maybe it will work do you have any suggestions on a good touchwiz based rom on the latest version of android?
To me Likewise looked the best but trying to get that rom working is what prompted this OP.
I still have yet to try again after this recent rom update as I havent had the time and the battery level is not high enough yet to start as i will need to create a new backup and delete my old ones as i have the 12 gb model and currently no sd card.
I will post back when that has been done to show my results. In the mean time ill be searching for another possibly suitable rom like i already said something with aroma and if you have a preference ill try that first.
S3rx 4.4.2 http://forum.xda-developers.com/showthread.php?t=2848080 try that and see if it works
Sent from my SGH-T999 using Tapatalk
serio22 said:
S3rx 4.4.2 http://forum.xda-developers.com/showthread.php?t=2848080 try that and see if it works
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
it wont change my modem? and it will be OK I NEVER have used a rom other than roms made specially for t-mobile i was always under the impression that's a bad idea? I know att and t-mobile are sometimes compatible though but Ive still always been weary so before i do it you want me to use an att rom on my t-mobile?
Anythi8ng special i should know before i do it (besides thew obvious like make a backup and follow op directions) because im not on att i dont want another soft brick (cant afford to have that happen right now either) and a HARD brick would totally mess me up. (i just paid this off lol)
serio22 said:
S3rx 4.4.2 http://forum.xda-developers.com/showthread.php?t=2848080 try that and see if it works
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
it wont change my modem? and it will be OK I NEVER have used a rom other than roms made specially for t-mobile i was always under the impression that's a bad idea? I know att and t-mobile are sometimes compatible though but Ive still always been weary so before i do it you want me to use an att rom on my t-mobile?
Anythi8ng special i should know before i do it (besides thew obvious like make a backup and follow op directions) because im not on att i dont want another soft brick (cant afford to have that happen right now either) and a HARD brick would totally mess me up. (i just paid this off lol)
EDIT:
AT&T I747 users should update bootloaders and modem to NE4 http://forum.xda-developers.com/gala...pdate-t2808654 I747M and T999 users need to be on 4.3 firmware or ROM will not boot.
Click to expand...
Click to collapse
after reading this it makes me for comfortable so ill try it out Im currently on S3Rx 4.3 so wish me luck I sure hope it works!!
Edit: well I tried it it installed fine but the screen would not display i could feel the phone vibrate as to start up although like i said no boot screen no Samsung loading screen basically yeah I'm having problems with 4.4.X
You don't need to change anything and it won't change your modem, you just need to be on 4.3 firmware
serio22 said:
You don't need to change anything and it won't change your modem, you just need to be on 4.3 firmware
Click to expand...
Click to collapse
ill try again but the rom you said to try installed fine no problems but after restart no display????? it vibrated so IDK if it even booted. I am really confused I have never had problems like this. Especially with this phone as it has been easy from the start not the case with other devices i have used.
So ill try again maybe a reboot will get it working IDK but i guess ill try it again cross your fingers
BeatnikBandit said:
ill try again but the rom you said to try installed fine no problems but after restart no display????? it vibrated so IDK if it even booted. I am really confused I have never had problems like this. Especially with this phone as it has been easy from the start not the case with other devices i have used.
So ill try again maybe a reboot will get it working IDK but i guess ill try it again cross your fingers
Click to expand...
Click to collapse
That means you are not on 4.3 firmware, so update your firmware and try again
serio22 said:
That means you are not on 4.3 firmware, so update your firmware and try again
Click to expand...
Click to collapse
my phone says its 4.3 but like you said it must be an issue how do i update my firmware again?
BeatnikBandit said:
my phone says its 4.3 but like you said it must be an issue how do i update my firmware again?
Click to expand...
Click to collapse
You could be on a 4.3 ROM, but have a 4.1.x bootloader.. Download latest 4.3 firmware for your device and flash it with Odin
So yes i must be on 4.1.2 as that was the last time i flashed with odin so i believe you help3ed me with my main isssue now this is something i would like to be sure of:
Can i simply flash the following posted on the s3rx page or will i have to use odin i prefer not to as well i don't know much about it and it scares me as idk how to if possible backup in case of error as the only unfixed problem i have ever had was a while rooting a galaxy s 4g (the one that came with inception) and i walked away and the cord was unplugged and there was an error that it still has about firmware upgrade failure connect to kies and neither kies nor odin will connect to it so its currently in the same situation. So i am fearful of using odin unless it must be done.
Complete 4.3 T999, T999L and T999V bootloader and modem packages.
After flashing DO NOT try to install any older bootloaders or use any other odin.tar other then the latest 4.3 or you will brick your phone.
T999 ONLY, T999 ONLY, T999 Only
T999 ONLY, T999 ONLY, T999 Only
Complete MJC bootloader and modem
http://www.mediafire.com/download/5c..._modem_4.3.zip
Complete NC2 bootloader and modem *Added 3-22-14* Thanks to @Synthetic.Nightmare
http://www.mediafire.com/download/fc..._modem_4.3.zip
Click to expand...
Click to collapse
Would this be enough (would probably use NC2) or will i be better of using the latest root66 with odin? and if so can you give me some tips on odin usage as i would get the latest odin and the latest root66 rom and flash it hoping it works I would try to learn more also but yeah.
It's better to flash the full firmware with Odin imo, but it should be fine. And yes, use nc2
So i think the best cleanest way is to use odin although i have a few questions
First the latest version of odin should work right so 3.09 or 3.10?
Can a backup before this? is there a way to do it?
Lastly the best rom to flash is root 66 NC2 fot t999
Then i will be on a 4.3 bootloader and will be able to use 4.3+ roms?
I have the drivers the latest odin and the root66 image can you direct me on how to do it as a refresher?
I appreciate all your help!!
Please go to Android development an look at [baseband] an just go to first page should help with everything
I believe the root66 thread has instructions

need help with galaxy s 3 please

my nephew rooted my phone (little turd) I thought I bought it that way. so.... the phone updated on its own and when i woke up it was stuck on att logo, I reset phone, battery out,and hard reset nada nothing, so I sent it to shop not at&t seems how where I live it would take 5months to get there and back not to mention no warranty seems how he messed with it. The guy flashed it and got it working but when I got it back it says no sim please insert the sim is good, I downloaded phone info, i read it on this site and there is no baseband,imei,modem board can anyone please help me please I have a decent understanding of computers and software I need proper direction thank you so much in advance
from lawrence in kodiak alaska
dont know if this will help , but in part D (?) of this backup thread it talks about restoring imei without having a backup.
http://forum.xda-developers.com/showthread.php?t=1852255
the modem i believe can be flashed just like a ROM thru recovery. just have to make sure it matches your bootloader version. sure there is a thread for that.
more info.... bootloader version , carrier , sghi747 ? , current rom/android version. and hopefully some more help will jump in.
"all i can really do , is stay out of my own way and let the will of heaven be done"
mrrocketdog said:
dont know if this will help , but in part D (?) of this backup thread it talks about restoring imei without having a backup.
http://forum.xda-developers.com/showthread.php?t=1852255
the modem i believe can be flashed just like a ROM thru recovery. just have to make sure it matches your bootloader version. sure there is a thread for that.
more info.... bootloader version , carrier , sghi747 ? , current rom/android version. and hopefully some more help will jump in.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
bootloader I747ucufne4
at&t carrier
pda version I747ucuemjb
csc version I747attemjb
build number jss15j.I747ucuemjb
build description d2uc-user 4.3 jss15jI747ucuemjb release keyes
android version 4.3
hardware/board qcom/msm8960
knox warrant 0x1
i got this info from phone info samsung i decided more info is probably better, funny how a guy can rebuild any thing with a sparkplug or glow plug but a teeny battery and screen got me stumped LOL thank you again for responding!
lol. too much stuff under the hood. ok , this thread looks like it can you caught up to NE4 across the board.
http://forum.xda-developers.com/showthread.php?t=2808654
sorry i dont have more. theres prob an easier way. may want to also update your recovery CWM/twrp/philz whichever you use.
p.s. never ever downgrade your bootloader as it will brick your phone.
"all i can really do , is stay out of my own way and let the will of heaven be done"
---------- Post added at 09:26 AM ---------- Previous post was at 09:24 AM ----------
@audit13 , if available youre more than welcome to jump in anytime. i know i'm missing something obvious ; as always. lol.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Well I've got the required down loads and twrp I not rooted yet, I am thinking of waiting to see if anyone else chimes in just to be safe, I have not rooted before however when I went to recovery mode twrp came up, the files I got from the thread you directed me to when they were done the popped up and said phone needs to be rooted, ok I'm a bit scared lol I guess the worst thing that could happen is that I'll ruin the phone and have my excuse to buy the new cat s50 android dual sim
lol. ok. srry my bad , thought phone was rooted. hopefully some one will chyme in.
"all i can really do , is stay out of my own way and let the will of heaven be done"
I think rooting is needed, you should try it. And if it doesnt work you can buy another phone great excuse
Sent from my SM-G900F using XDA Free mobile app
Do you have access to wifi? If you do, install the Samsung Info App from the Play store and let me know the bootloader and modem version on your phone. The modem may be unknown because the modem does not match the bootloader.
I recommend not flashing or changing anything until you know exactly what's on your phone.
hi!!
audit13 said:
Do you have access to wifi? If you do, install the Samsung Info App from the Play store and let me know the bootloader and modem version on your phone. The modem may be unknown because the modem does not match the bootloader.
Good morning from Alaska
I recommend not flashing or changing anything until you know exactly what's on your phone.
Click to expand...
Click to collapse
hi, I have the app I read your post to someone else . cool app. bootloader I747UCUFNE4
bootloader I747ucufne4
at&t carrier
pda version I747ucuemjb
csc version I747attemjb
build number jss15j.I747ucuemjb
build description d2uc-user 4.3 jss15jI747ucuemjb release keyes
android version 4.3
hardware/board qcom/msm8960
knox warrant 0x1
Do you have a custom recovery installed (CWM or TWRP)? I think you need to flash an ne4 modem.
http://forum.xda-developers.com/showpost.php?p=53626873&postcount=4
twrp
audit13 said:
Do you have a custom recovery installed (CWM or TWRP)? I think you need to flash an ne4 modem.
http://forum.xda-developers.com/showpost.php?p=53626873&postcount=4
Click to expand...
Click to collapse
i do and i will install it now i wanted to wait and see what you thought I should do
okay almost!!
karlukalaska said:
i do and i will install it now i wanted to wait and see what you thought I should do
Click to expand...
Click to collapse
I flashed and now have correct imei,baseband and now shows att network under phone info, im in remote village with no cell service so I cant really know if its all right, Problem, now I have no wifi capability, is there a fix? maybe a bundle per say? Thank you all so much for the help!!!!!!!!!!!!!!!!!
pda-csc
karlukalaska said:
i do and i will install it now i wanted to wait and see what you thought I should do
Click to expand...
Click to collapse
karlukalaska said:
I flashed and now have correct imei,baseband and now shows att network under phone info, im in remote village with no cell service so I cant really know if its all right, Problem, now I have no wifi capability, is there a fix? maybe a bundle per say? Thank you all so much for the help!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
sorry to bug but does the pda version and csc have to match the bootloader and baseband NE4 dont laugh and remember Im new to this LOL
thanx
Since you don't have wifi, it may be because the ROM is 4.3 with a 4.4.2 bootloader and modem.
http://forum.xda-developers.com/showpost.php?p=54029413&postcount=11
So should I be using 4.4.2 Ota zip update?
Have a look at the thread. The first post says it will update the bootloader and modem to ne4. Are you already on ne4 modem and bootloader? You should be since imei is back with the ne4 bootloader.
I guess I didn't understand yes I'm on ne4 modem and bootloader
Your wifi doesn't turn on or it turns on and cannot connect to a network?
Not sure what to suggest since I have not run into this situation before. You could either flash a custom kernel or flash everything to 4.4.2 using the zip file from that thread.
You could also try to locate an updated csc file as well. Not sure if that will make a difference.
audit13 said:
Your wifi doesn't turn on or it turns on and cannot connect to a network?
Not sure what to suggest since I have not run into this situation before. You could either flash a custom kernel or flash everything to 4.4.2 using the zip file from that thread.
You could also try to locate an updated csc file as well. Not sure if that will make a difference.
Click to expand...
Click to collapse
yes its weird everything seems to work but wifi, wifi just wont turn on slide it over to on it just slides back lol darn bugger
I not sure that a CSC file will help since that file is really just for carrier customization.
You suppose you could try flashing the full ne4 firmware from the thread I linked.

Categories

Resources