Its not detailed guide, so use your brain
Part A
1. Install any rom which you want to use as first rom ( in my case i installed cm-11-20150214-UNOFFICIAL-armani.zip)
2 Now flash the dual boot aroma installer and enter function.
3. select install and uninstall menu
4. Select "Install the dual boot system" ( it will formate your internal as well as all data)
5. it will reboot to recovey ,now restart the phone
6. It should boot into your pre installed rom ( im my case cm-11-20150214-UNOFFICIAL-armani.zip)
Part B
1 . Flash the dual boot aroma installer
2 . Select "Install Systemchanger"
3 . Select "System One"
4 . At the end it will ask to tick "restart phone" , select it. It will restart phone.
5 . Now you will find a system changer icon, tap it and grant it root permission.
6 . Device will reboot but will not boot to any os.
7 . Now go to recovery mode with key combo (Power + Vol Up)
8 . Now install your desired second rom (in my case MIUI v5 Build v45)
9 . Don't reboot to system , instead reboot to recovery.
10 . Flash dual boot aroma installer
11 . Select "Install Systemchanger"
12 . Select "System Two"
13 . At the end it will ask to tick "restart phone" , select it. It will restart phone.
14 . You should find a Systemchanger icon in second OS ( in my case MIUI v5 Build 45) ,if yo can't find then again repeat steps 10,11 and 12 of Part B
Thats it,, I will update guide later for changing roms
revert back, and others tutorials,,,,,,,
Changing ROM
1. Boot into that rom which you want to change ( in my case cm-11-20150214-UNOFFICIAL-armani.zip) then reboot to recovery
2 Now flash the new rom , for example Carbon or PA and wipe cache and dalvik cache.
3. Flash dual boot aroma installer and select clear data (this step is optional and it will wipe your previous rom data , so proceed only if you want)
4. Reboot the device.
5. Reboot to recovery and flash dual boot aroma installer and select "Install Systemchanger".
6. Select "Install Systemchanger"
7. Select "System One" if yo are changing first system or select "System two" if you are changing second system (in my case "System one" because i installed cm in first system)
8. At the end it will ask to tick "restart phone" , select it. It will restart phone.
9. Now you will find a system changer icon in newly installed system i.e. PA, Carbon , tap it and grant it root permission.
Uninstalling Dual System
1. Flash the aroma installer
2. Enter Function and Select "Uninstall Dual system"
3. It will reboot to recovery
4. After getting into recovery you can install any rom in traditional single system mode.
Cleaning data
Don't formate data with recovery options, it will wipe data of both roms so use dual boot aroma installer to clear data.
1. Boot into rom in which you want to clear data
2. Flash dual boot aroma installer
3. Enter the function
4. Select Clean data and restart the device
,,,,,,,
Goin to Try it
If i flash the mokke 50.0 as 2nd system it is telling that "no such volume", what i have to do avoid this problem??
BATVIC said:
If i flash the mokke 50.0 as 2nd system it is telling that "no such volume", what i have to do avoid this problem??
Click to expand...
Click to collapse
Try doing all steps from first
There is a revised guide in the other dual boot thread
Sent from my HM 1S using XDA Free mobile app
as9333 said:
Try doing all steps from first
There is a revised guide in the other dual boot thread
Sent from my HM 1S using XDA Free mobile app
Click to expand...
Click to collapse
I am having cr-droid as the 1st system and if i flash the cm11 it is working but if i flash mokke it is not working and telling no such volume.
BATVIC said:
I am having cr-droid as the 1st system and if i flash the cm11 it is working but if i flash mokke it is not working and telling no such volume.
Click to expand...
Click to collapse
cm12 has different type of updater script and also different type of files inside zip.. so won't work,,
Related
Hi guys, I have recently loaded UHD 3.0.2 onto my Sony Ericcson Xperia Arc, but when trying to complete the last step below, my phone wont enter CWM. The phone isn't in a boot loop but the Wifi isnt working and I do have the modules on my SD card.
C. Install custom rom
========================
. Turn on ur phone now then keep pressing volume down to enter CWM.
. Standard operation before installing new rom :
- wipe data/factory reset
- wipe cache partition
- mount and storage -> format /system
- advanced -> wipe dalvik cache
- advanced -> wipe battery stats
. Now install zip from sdcard -> choose the UHD zip file, and follow the instruction in aroma. After finish don't reboot yet.
. Unchecked the reboot in aroma, after finish, u will be back in cwm.
. Now install the wifi modules first ( usually the custom kernel have their own wifi modules).
. reboot system.
. Finish
Please Help!!
Ejazr said:
Hi guys, I have recently loaded UHD 3.0.2 onto my Sony Ericcson Xperia Arc, but when trying to complete the last step below, my phone wont enter CWM. The phone isn't in a boot loop but the Wifi isnt working and I do have the modules on my SD card.
C. Install custom rom
========================
. Turn on ur phone now then keep pressing volume down to enter CWM.
. Standard operation before installing new rom :
- wipe data/factory reset
- wipe cache partition
- mount and storage -> format /system
- advanced -> wipe dalvik cache
- advanced -> wipe battery stats
. Now install zip from sdcard -> choose the UHD zip file, and follow the instruction in aroma. After finish don't reboot yet.
. Unchecked the reboot in aroma, after finish, u will be back in cwm.
. Now install the wifi modules first ( usually the custom kernel have their own wifi modules).
. reboot system.
. Finish
Please Help!!
Click to expand...
Click to collapse
Hi Ejazr,
When you finish with aroma press the back key, then select advanced (the last option, in the bottom), and there you'll find the option reboot recovery, select it, then follow with the wifi modules etc.
Good luck.
Sent from my GT-S5830 with The Ultimatum, Swap All OC, Viper and Fly-On mod
BajoPrimate said:
Hi Ejazr,
When you finish with aroma press the back key, then select advanced (the last option, in the bottom), and there you'll find the option reboot recovery, select it, then follow with the wifi modules etc.
Good luck.
Sent from my GT-S5830 with The Ultimatum, Swap All OC, Viper and Fly-On mod
Click to expand...
Click to collapse
Hi BajoPrimate,
Thank you for your quick reply I really appreciate it!, I am very very new to this, but what I try to do to enter the CWM mode is shutdown the phone, turn it back on while pressing the down volume button, but it doesn't seem to do anything, it just boots into the normal phone screen, Please help as I desperately need to resolve the issue with my Wi-Fi not authenticating.
Ejazr said:
Hi BajoPrimate,
Thank you for your quick reply I really appreciate it!, I am very very new to this, but what I try to do to enter the CWM mode is shutdown the phone, turn it back on while pressing the down volume button, but it doesn't seem to do anything, it just boots into the normal phone screen, Please help as I desperately need to resolve the issue with my Wi-Fi not authenticating.
Click to expand...
Click to collapse
Hi Ejazr, try another key, in my brother's phone it's the back key, but it could be another, reboot and try eventually you'll get it.
Edited : my brother says that with this room he uses volumen down key also, so I don't know, perhaps you could try installing x-parts from the market, but be careful, I'm not sure now. Sorry and good luck.
Good luck, and you're welcome.
Sent from my GT-S5830 with The Ultimatum, Swap All OC, Viper and Fly-On mod
Well, just Flash the .587 ftf . and then flash the kernel, and then install ROM from CWM. It should work if your did this procedural properly.
Wish the best . :good:
I was facing bootloop (stuck at mi logo) issue with installing any custom Rom on my Redmi 1s, and i think many other people suffering this prob too.
Today i finally did it! So, now going to tell you how to excatcly flash any ROM on Redmi 1S!
Follow these steps : (STEP No. 4 and No.6 is too RECOMMENDED) !!
1.Flash TWRP Recovery (Latest one)
2.Backup your ROM (RECOMMENDED)
3.Go to "wipe > Swipe to Factory Reset"
4.(INPORTENT!) after Factory reset, go back on Home, then go to "Reboot > Recovery" (NOTE: reboot into recovery, not in system)
5.After that go to "wipe" again, then click on "Advanced Wipe" then select everything except "USB OTG" and "External SD".
6.After that, reboot into recovery again! Follow 4th no step again! (RECOMMENDED)
7.Now flash the custom ROM zip.
8.After flash, dont reboot! clear delvik cache! (this option will come on left side when your flashing will done)
9.Now Reboot to System and enjoy the ROM
boot loop still exists
Hey i tried this step by step ,,,still failure ,,,, after flashing rom when i reboot to system its just coming to mi screen n blinking
abhijeet.mitra.7 said:
I was facing bootloop (stuck at mi logo) issue with installing any custom Rom on my Redmi 1s, and i think many other people suffering this prob too.
Today i finally did it! So, now going to tell you how to excatcly flash any ROM on Redmi 1S!
Follow these steps : (STEP No. 4 and No.6 is too RECOMMENDED) !!
1.Flash TWRP Recovery (Latest one)
2.Backup your ROM (RECOMMENDED)
3.Go to "wipe > Swipe to Factory Reset"
4.(INPORTENT!) after Factory reset, go back on Home, then go to "Reboot > Recovery" (NOTE: reboot into recovery, not in system)
5.After that go to "wipe" again, then click on "Advanced Wipe" then select everything except "USB OTG" and "External SD".
6.After that, reboot into recovery again! Follow 4th no step again! (RECOMMENDED)
7.Now flash the custom ROM zip.
8.After flash, dont reboot! clear delvik cache! (this option will come on left side when your flashing will done)
9.Now Reboot to System and enjoy the ROM
Click to expand...
Click to collapse
sauman said:
Hey i tried this step by step ,,,still failure ,,,, after flashing rom when i reboot to system its just coming to mi screen n blinking
Click to expand...
Click to collapse
Which rom have you flashed??
I have tried with Ressurection Remix & Xperience both marshmallow version,,,,
vicky romero said:
Which rom have you flashed??
Click to expand...
Click to collapse
sauman said:
I have tried with Ressurection Remix & Xperience both marshmallow version,,,,
Click to expand...
Click to collapse
First wipe cache,dalvik cache,system, data and internal then flash rom then without wiping anything flash gapps then again without wiping anything flash firmware then reboot to system without wiping
1. Download resources:
a. Download the rom UL USER, leave it there and do nothing to it yet.
b. Download the twrp.zip file https://mega.nz/#!l8BXgaDL!Y1AH5TM9jKI5r6LtEKFN_4Po105glHNR602yVDipfF8 (if you still have twrp installed beforehand)
c. Magisk 20.0 https://github.com/topjohnwu/Magisk/releases/download/v20.0/Magisk-v20.0.zip
2. Proceed:
Do not update the UL USER rom from the device's interface (SYSTEM UI), power off, boot into TWRP. Select install zip in the following order:
a. Rom UL USER
b. Twrp.zip
c. Magisk v20.0 (or exit the main menu, select Advanced, install root also)
Done, exit the main menu select advanced wipe, wipe cache, dalvik.
Reboot the device.
Done.
By chicken
This did not completely work for me going from .35 to .64. All the steps completed successfully but when I rebooted the phone, Magisk was not installed so I didn't have root. I was able to then boot to TWRP and successfully install Magisk, but I don't know why it didn't work the first time. Anyone else try this? Did it work as intended for you?
One other thing I noticed - TWRP no longer has an option to wipe the cache under wipe > advanced, only for Dalvik/ART cache. Why?
Wish I would have tried this before i updated and lost root, i flashed a root boot.img with fastboot now im bricked and don't know what to do.
EDIT: got twrp did a factory reset and im in now.
dungnghien said:
1. Download resources:
a. Download the rom UL USER, leave it there and do nothing to it yet.
b. Download the twrp.zip file https://mega.nz/#!l8BXgaDL!Y1AH5TM9jKI5r6LtEKFN_4Po105glHNR602yVDipfF8 (if you still have twrp installed beforehand)
c. Magisk 20.0 https://github.com/topjohnwu/Magisk/releases/download/v20.0/Magisk-v20.0.zip
2. Proceed:
Do not update the UL USER rom from the device's interface (SYSTEM UI), power off, boot into TWRP. Select install zip in the following order:
a. Rom UL USER
b. Twrp.zip
c. Magisk v20.0 (or exit the main menu, select Advanced, install root also)
Done, exit the main menu select advanced wipe, wipe cache, dalvik.
Reboot the device.
Done.
By chicken
Click to expand...
Click to collapse
In my experience after install back twrp reboot back to recovery (twrp) before flashing magisk .
Does this work when updating to A10?
Good evening everyone
I followed steps on this page https://forum.xda-developers.com/re...edmi-note-8-pro-guide-firmwares-twrp-t3987121 and installed twrp and root perfectly with miui 10.4.2. I then installed miui_BEGONIAGlobal_V11.0.1.0.PGGMIXM_f057ff19fc_9.0.zip successfully using twrp. When I rebooted twrp was missing and the standard recovery popped up instead of twrp. Would reinstalling twrp and following the directions based on the site listed above allow me to root miui 11 before I brick my phone again? Has anyone successfully rooted miui 11 on Redmi note 8 pro global version?
When phone bricked, you should flash the phone with Miflash again. Then flash recovery, reboot to recovery. In twrp, install miui 11 recovery file.zip. After that, you do not restart, do these steps:
3.Install and look for the supersu folder>select the file SuperSu_instsller.zip and install.
4. Make Wipe, Advanced Wipe, Dalvik/Art Cache, Data and Cache and swipe
5. Make Wipe and Format Data
6. Mount the SD card, install magisk-uninstaller.zip to remove the old Magisk
7. Install magisk-release.zip Install the new Magisk v20.2
8. Advanced > File Manager >system_root / system > Delete the recovery_fromboot.p file
9. Advanced (put 2 checkmarks) Close AVB2.0
10. Advanced (put 2 ticks) RM Force encrypt
11. Reboot System
12. Pass authorization, install the Magisk app-release.apk
13. Click in the application: Check SafeNet status
Click to expand...
Click to collapse
I'm success with bigonia China version. But you should use Magisk 19.3, miui 11 not compatible with magisk 20.1
I don't know which version that not making my phone bootloop. Tried Magisk 19 and 20, both makes bootloop. Anyone can help me?
Root android 10 miui
Use lrtwrp q
steps:
1.boot into twrp
2.go to advanced
3.click installl root
4.swipe to install root
5.reboot your device
saanchey said:
Use lrtwrp q
steps:
1.boot into twrp
2.go to advanced
3.click installl root
4.swipe to install root
5.reboot your device
Click to expand...
Click to collapse
Nope it's still bootloop here
uyo_kun said:
Nope it's still bootloop here
Click to expand...
Click to collapse
Before going to install root , go to close avb 2.0 in advanced settings and flash it and then try to root
saanchey said:
Before going to install root , go to close avb 2.0 in advanced settings and flash it and then try to root
Click to expand...
Click to collapse
Thank you! Finally it work! :victory:
can you write full instruction?
- Unlock bootloader
- Install twrp lr team (easy to find for android 9, and for android 10 use this of my post, is the last... https://forum.xda-developers.com/re...ui-11-global-android-10-t4066479#post82062075)
- format data, if is encrypted. (This format all your data, make a backup)
- go to Advanced, File Manager, navigate to, system_root, system, and delete recovery-from-boot.p.
-go back to Advanced, and search Close AVB2.0, slide to close.
-in advanced, install root. This install magisk 19, you can install the last version in magisk manager, direct install, more later.
-reboot
You have your rom rooted...
MOD EDIT: QUOTE REMOVED
Sorry, but this is not correct.
This is the correct procedure...
- Unlock bootloader
- Install twrp lr team (easy to find for android 9, and for android 10 use this of my post, is the last... https://forum.xda-developers.com/red...9#post82062075)
- format data, if is encrypted. (This format all your data, make a backup)
- go to Advanced, File Manager, navigate to, system_root, system, and delete recovery-from-boot.p.
-go back to Advanced, and search Close AVB2.0, slide to close.
-in advanced, install root. This install magisk 19, you can install the last version in magisk manager, direct install, more later.
-reboot