hardware differences - AT&T Samsung Galaxy Note 4

Is there any hardware difference between Note 4 variants?
I broke my screen and bent the housing. On ebay, there is a replacement part for Sprint Note 4 (N910P) and the seller says that it will not work for other variants.
Can anyone confirm this?

This won't fully answer your question, but I know for a fact that the Verizon version has the microphones in different places than the ATT and T-Mobile versions. I know because while buying a case, I kept seeing Verizon users rating the case's as 1 star because the case was covering the microphone. ATT and Tmobile users were giving high ratings and saying that the case fit perfectly and didn't cover the microphone.
So my point is that yes, there are some differences, but it depends on the varients. Some varients are the same in some areas, but different in others, while some varients are 100% same. I just don't know how the Sprint version compares to the ATT version though.
Sent from my Samsung Galaxy Note 4 (sm-910a) using Tapatalk

Related

[Q] I9100 and T989 - How different are they?

So I just purchased the T-Mobile variant of the Samsung Galaxy S2. However there seems to be little to no cases available for it.
Does anyone know how physically different these versions are?
The case I'm looking at says it will fit the international and Canadian versions but not the Sprint version. (It doesn't say anything about the T-Mobile one).
The case is the Case Mate Galaxy S2 Pop! I'd post a link but can't just yet.
Any help/advice would be appreciated!
Thanks!
rob04 said:
So I just purchased the T-Mobile variant of the Samsung Galaxy S2. However there seems to be little to no cases available for it.
Does anyone know how physically different these versions are?
The case I'm looking at says it will fit the international and Canadian versions but not the Sprint version. (It doesn't say anything about the T-Mobile one).
The case is the Case Mate Galaxy S2 Pop! I'd post a link but can't just yet.
Any help/advice would be appreciated!
Thanks!
Click to expand...
Click to collapse
The case on the international version will not fit the T-Mobile version. Our phone is slightly larger, wider. Also the camera and led on our phone has an up and down design, the international and at&t version has a side by side design for the camera and led. You will have to get a T-Mobile specific case!
Sent from my SGH-T989 using xda premium
Dunno where you're looking but I have found almost all the cases that there were for the Sensation on ebay already.......
search eBay "t989 case"
Thanks guys!
I'm looking for a few specific brands I've used in the past.... specifically Case-Mate and Otterbox. However neither have a T-Mobile version yet that I can find.
size wise they are different the Tmo version is bigger / wider
some accessories wont fit
rob04 said:
So I just purchased the T-Mobile variant of the Samsung Galaxy S2. However there seems to be little to no cases available for it.
Does anyone know how physically different these versions are?
The case I'm looking at says it will fit the international and Canadian versions but not the Sprint version. (It doesn't say anything about the T-Mobile one).
The case is the Case Mate Galaxy S2 Pop! I'd post a link but can't just yet.
Any help/advice would be appreciated!
Thanks!
Click to expand...
Click to collapse

Battery for Int'l and AT&T version - can I use one with the other?

I have not seen the seller selling the original battery for the Int'l version of the Note (N7000), however there are some that sell original battery for the AT&T version. However, they noted that the AT&T version is not compatible with the Int'l version.
I am thinking that the AT&T version can be used for the Int'l version, so I emailed on of the seller and their response is:
Both the international Note and the US version of the Note are constructed a
bit differently. The battery for the international version is different
than the battery for the US version. Not sure if it is to accommodate the
voltage difference of the wall chargers but I hear from the customers that
the batteries are different and not interchangable. The Note battery we
sell is for the U.S. ATT Note SGH-i717 only and will not work on the Samsung
Note N7000.
So it seems that there is an issue with charging the battery, judging by what this seller's customer reported? Can anyone provide insight on this?
My goal is to buy ORIGINAL Samsung battery, so I don't have to deal with quality or incompatibility issue and ended up damaging my Int'l Note, which have NO Samsung US warranty. If the AT&T version can be used in my Int'l version, I can buy one from an AT&T store!
NOTE: I used to have a Nokia phone a while back and I use 3rd party battery (non Nokia battery) and it damaged my phone, so I don't want to go through the same thing again.
I use both with no problems!
Sent from my GT-N7000 using xda premium
Think about it this way:
Compatible means physical size, shape, electrical contacts, and voltage and charging are the same.
What you are worried about is crappy chemistry, poor quality of manufacturing, or other poor design. Which is not an issue with any OEM battery.
Go to ATT store, pull the battery, read the ratings and compare their size and shape. If they match, you are golden.
David
I did order one of the AT&T Note batteries for my N7000 international Note. Both batteries look identical. After several charges with the new battery, it doesn't seem to function any differently either.
So if you want a second battery, proceed with one for the AT&T Note.
Best is to check part numbers if present.
One thing I know is that in the I777, I9100 batteries wouldn't work - the I777 specifically checked the ID resistor (the pin between + and -) for a value that was different from I9100 batteries - but with the I777, NFC was in the battery.
In the I717, NFC is in the battery door instead of the battery.

If I buy a case designated for N7100, will it fit my att GN2?

Question in title.
I know the model number is SGH-I717 but is SGH-I717 the same as N7100?
I717? :what:
That's the note 1
If you mean I317, then yes N7100 cases will fit at&t note 2.
Sent from my SAMSUNG-SGH-I317 using xda premium
My apologizes I meant to say i317
All the versions of the note 2 are the same as far as hardware fit.
Yes, cases marketed for the N7100/N7105 will fit the SGH-I317 along with other GALAXY Note II models, as the hardware layout is identical. That being said, I'd recommend staying away from cheaper TPU cases or if you're buying in person, ask to try the case on first -- the reason I say this is because some cases aren't cut very well, I've seen a few where the cutouts for the camera and the charging port were too small for example.
Have a great day and enjoy your phone!

Frame picture

Hey guys. I have a request of someone with a Verizon Note 4. I bought a gold Chinese note 4 frame on eBay with the seller saying it would fit my T-Mobile note 4. Of course, i knew most likely that it would not. I think it might fit the Verizon model, but I'm not 100% sure. I was wondering if someone could take their frame off their Verizon model and take a few pictures for me to see if it would be compatible. I have a feeling the mold that they used for the frame is the N910F international variant. I think it is very similar to the Verizon model. I'm attaching pictures of the two frames.

[Q] Is "standard" Note 8 digitizer compatible with the i467 (AT&T) Note 8?

[Q] Is "standard" Note 8 digitizer compatible with the i467 (AT&T) Note 8?
Hi All,
I spent some time searching but didn't come up with anything definitive. I've heard from one source that a standard Galaxy Note 8 digitizer (e.g., GT-N5110) *is not* compatible with the AT&T branded Note 8 (SGH-I467). Price online for replacements are significantly higher for what are called I467 digitizers than a regular Note 8 digitizer, so wanted to get a second opinion before purchasing.
Thanks!
I know this is an old thread. Since it took me some efforts to figure this out, I am sharing with the public.
In terms of the digitizer, GT-5110 *IS* compatible with SGH-I467. This is because neither have an earpiece or proximity sensor. GT-5100 has these 2 hardware. Thus, if you put a GT-5100 digitizer on SGH-I467, you would have extra holes. Many sellers on eBay would tell you both GT-5110 and SGH-I467 share the same digitizer because both are Wi-Fi only version. This is WRONG. While GT-5110 is Wi-Fi only, SGH-I467 is LTE. However, the radio capability is IRRELEVANT. What makes them compatible is the lack of these extra holes. By grouping GT-5110 with SGH-I467 these sellers do sell you the right part even though they have the wrong knowledge. haha

Categories

Resources