[KERNEL] No Force Encrypt CM12 Nexus 9 Kernel - Nexus 9 Android Development

**I AM NOT RESPONSIBLE FOR ANY NEGATIVE OUTCOMES CAUSED BY ANY FILE HERE OR ANY INSTRUCTIONS**
Stock CM12 kernel, but without forced encryption.
ZIP and IMG available!
Download Directories: (Direct downloads in first post)
Root download directory: https://www.androidfilehost.com/?w=files&flid=26041
ZIPs): https://www.androidfilehost.com/?w=files&flid=26073
IMGs: https://www.androidfilehost.com/?w=files&flid=26074
Install instructions:
I will create a new modified boot.img every time the kernel is updated!
Flash latest cm12 nightly in recovery and then flash boot.img zip in recovery before reboot!
If you are already encrypted you will also have to wipe data which means you will lose everything!
IMG:
Flash the latest cm12 nightly. Wipe data if the device is already encrypted, then boot into fastboot and use "fastboot flash boot boot.img"
**YOU MUST DO THIS EVERY TIME YOU FLASH CM12**
Remember to hit :good: thanks!
XDA:DevDB Information
Nexus 9 Stock CM12 Kernel Without Forced Encryption, Kernel for the Nexus 9
Contributors
sp99
Kernel Special Features: No forced encryption
Version Information
Status: Beta
Created 2015-02-09
Last Updated 2015-02-11

Download Links:
Download Directories:
Root download directory: https://www.androidfilehost.com/?w=files&flid=26041
ZIPs: https://www.androidfilehost.com/?w=files&flid=26073
IMGs: https://www.androidfilehost.com/?w=files&flid=26074
Direct downloads:
20150209:
IMG:https://www.androidfilehost.com/?fid=95916177934526641
ZIP:https://www.androidfilehost.com/?fid=95916177934526727

Reserved

Thank you for providing this. Huge speed increase when copying files. Forced encryption the Nexus 9 is so slow, especially when comparing it to my encrypted Nexus 6 and 5.

I know, the forced encryption thing is stupid
Remember to flash the latest boot.img I have with each update, I'll make it a flashable zip later and do the latest nightly
Sent from my A0001 using XDA Free mobile app

sp99 said:
I know, the forced encryption thing is stupid
Remember to flash the latest boot.img I have with each update, I'll make it a flashable zip later and do the latest nightly
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
This is great, ill link it in my OP
The flashable part isn't hard if you want i can help you with it( i had to do it a few times for when we were trying to get the kernel to build)
Also i don't think it will be necessary to rebuild this everyday as nothing in the flounder kernel should really ever change.
EDIT: my bad, looks like you already have the flashables built
And linked to your thread, you rock

zawata said:
This is great, ill link it in my OP
The flashable part isn't hard if you want i can help you with it( i had to do it a few times for when we were trying to get the kernel to build)
Also i don't think it will be necessary to rebuild this everyday as nothing in the flounder kernel should really ever change.
EDIT: my bad, looks like you already have the flashables built
And linked to your thread, you rock
Click to expand...
Click to collapse
Thanks!

If anyone can test the flashable zip that'd be great as I'm letting my n9 charge to 100% after I got a bootloop (not from this don't worry ) and I thought I turned it off... but I obviously didn't so it completely ran out of battery
So much so that its hidden LED lit up! (I didn't think it even had one)
But yeah, if someone could test it that'd be great! :angel:
EDIT: Doesn't matter

zawata said:
This is great, ill link it in my OP
The flashable part isn't hard if you want i can help you with it( i had to do it a few times for when we were trying to get the kernel to build)
Also i don't think it will be necessary to rebuild this everyday as nothing in the flounder kernel should really ever change.
EDIT: my bad, looks like you already have the flashables built
And linked to your thread, you rock
Click to expand...
Click to collapse
I'm having some problems making the zip work :/ I've tried the cm12 update binary and signed using a testsign program but it comes up with errors
EDIT: Fixed

I have the official CM now.. with encrypted on is still good.
How do we know if the system was encrypted in off with this? and what are the benefits? other than some say it is a bit faster.

@sp99
you dont have to make a zip for every build.
you can look here to see if changes happen :highfive:

Max128 said:
I have the official CM now.. with encrypted on is still good.
How do we know if the system was encrypted in off with this? and what are the benefits? other than some say it is a bit faster.
Click to expand...
Click to collapse
It say if it is encrypts in security, but without encryption it seems a lot faster!

USBhost said:
@sp99
you dont have to make a zip for every build.
you can look here to see if changes happen :highfive:
Click to expand...
Click to collapse
Thanks!

sp99 said:
It say if it is encrypts in security, but without encryption it seems a lot faster!
Click to expand...
Click to collapse
I flashed the latest CM12 nightly (from today) and flashed this kernel (9-2), and did an data/factory reset, but it still says Encrypted under Settings -> Security.
I'm using the latest TWRP.
Any suggestion?

edgarf28 said:
I flashed the latest CM12 nightly (from today) and flashed this kernel (9-2), and did an data/factory reset, but it still says Encrypted under Settings -> Security.
I'm using the latest TWRP.
Any suggestion?
Click to expand...
Click to collapse
So did you download cm zip and kernel to computrer, boot to twrp, wipe data, system, cache, dalvik and factory reset. adb push the files and flash cm then the kernel?

I thought he had a new file each build? the build today is working with the file 09, the file is the same?

Max128 said:
I thought he had a new file each build? the build today is working with the file 09, the file is the same?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=58769046&postcount=11

Is working for me now.

Hi,
I want to know if you could do a similar script for the nexus 9? it'd be great!
http://forum.xda-developers.com/nexus-6/development/mod-disable-force-encryption-rom-kernel-t3000788

This is the nexus 9... ?
Sent from my A0001 using XDA Free mobile app

Related

[PATCH][ICS][CM9] PDroid patch for CM9 - CWM Flashable ZIP

Hey guys,
Alroger has included a patched framework into one of his builds, offering support for PDroid. Based on their work, the modified JAR files seem to do the work nicely. Therefore, you can find the patched and unpatched versions of the files in CWM flashable format attached to this post.
Please report back if it works for you, as it will be valuable feedback to the team porting PDroid to ICS.
For more info on PDroid, go here:http://forum.xda-developers.com/showthread.php?t=1357056
For more info on the port of PDroid to ICS, go here: http://forum.xda-developers.com/showthread.php?t=1554960
Notes & Observations
- Only compatible with official CM9 (Android 4.0.3 and 4.0.4).
- Only compatible with Recovery 3.0.x or later (should not be a problem with recent/modern ROMs/builds).
- This build is only compatible with SGT7 device variants and the CM9 builds released for these devices.
However, if you indeed get into trouble, try clearing cache, dalvik cache and flashing your original ROM on top of this package. No data wipe should be required!
Download & Install:
Download OP post attachment of your choice (based on CM9 0421 nightly)
Flash P1-PDroid-CM9-0421-CWM.ON.v2.zip to apply patch
Flash P1-PDroid-CM9-0421-CWM.OFF.v2.zip to remove patch
Save zips onto your Tab
Reboot in Recovery mode
Install zip from SD Card
Reboot tab & wait for Android to upgrade
Install PDroid app from market (market link)
Enjoy
Disclaimer
I will not offer support to anyone in case these ZIPs cause any harm or damage in any way. You are responsible of your own actions including flashing anything to your device!
Thanks and Credits
Thanks, in no particular order to these guys:
svyat for the initial work
pastime1971 for the ICS port
alroger for building the patched framework files compatible with CM9 and giving me his blessing to pack the patched framework files
Let me know of any issues or success stories in the thread.
Peace,
C.
I don't need to flash this patch as I already use alroger's build of CM9 ROM with PDroid (2012-04-24), but I just wanted to say thank you, as this is excellent news for next time when I don't use a ROM that already includes PDroid patches!
http://cafe-ti.blog.br/1524~sgt7-p1000-android-ics-cm9-mtd.html
Is this device specific?
It runs on all SGT7 variants running official CM9 build.
It won't work for other ROMs or other devices than SGT7.
PS: if it runs on something else, it is only by chance!
Peace,
C.
Ok...thanks anyway.
From the OP it read like it was good for any cm9.
Hope nobody flashes it on the wrong device.
Luckily I was smart enough to ask first.
I thought it is common sense since this is SGT7 forum?
Sent from my GT-P1000 using XDA
priyana said:
I thought it is common sense since this is SGT7 forum?
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Just followed a link that he posted from a different thread....
And the xda app doesn't say what device thread you're in if you follow a link.
will this work on a sph-p100 running update-cm-9-20120425-NIGHTLY-p1c-signed
LivnDream said:
will this work on a sph-p100 running update-cm-9-20120425-NIGHTLY-p1c-signed
Click to expand...
Click to collapse
Yes, @cheatman's post is exactly for the official cm9 nightly p1 and p1c (Galaxy Tab 7 GSM and CDMA).
And he offers the removal of the patch also, in case you have any problems.
thanks will give it a go
Hi Cheatman,
Will this work on AOKP ICS?
Or will it need a different one? Can you build one?
Thanks!!
First thing: updated OP post to avoid confusion.
Secondly @priyana: It will probably break AOKP builds as the framework is heavily modified compared to CM9. You could try to flash it and report back, but be ready to flash AOKP again on top of it if it bugs out.
If you have issues, you will not need to restock or wipe data. You can just flash AOKP again on top of it and it should return to normal after a reboot.
Peace,
C.
Thanks Cheatman.
Just to feed back here.
I just tried applying it on my aokp build #31 but can't boot into the OS.
Flashed the from again on top of it and I am back to aokp like you said.
Sent from my GT-P1000 using XDA
Same for me with AOKP. After installing the ON package it boots up to the part of updating, the next start it doesn't boot up anymore and is stuck on the bootlogo and makes a short vibration in repeated intervalls.
Installed the OFF package, updated on first boot, doesn't work anymore on next boot just like the ON package.
Too bad for me as I'm going to use the train now and could've used the tab.
Thanks anyway and I'm still interested in this and would hope to see a fix.
You can still use the tab by flashing aokp again.
All data intact in my case.
Sent from my GT-P1000 using XDA
I know that and did that already because OP wrote that in the first post:
"However, if you indeed get into trouble, try clearing cache, dalvik cache and flashing your original ROM on top of this package."
Works as usual but no pdroid.
OK.
Read you wrongly because you said too bad, you "could have used the tab"
I thought you meant now it is unusable/broken, hence the reminder.
Sent from my GT-P1000 using XDA

[ROM][UNOFFICIAL][4.4.3][D2TMO/D2LTE] Omni Rom for all D2s [Multi-window][OpenDelta]

This is an unofficial build of Omni Rom based on KitKit 4.4.2. There is no official support for the d2 variants. Props to androidsftw for picking apart what was needed for our d2s.
I am not the dev of this rom, all I did was add in necessary device/vendor/d2 files for d2. This is not a port, everything has been built from source.
As with all things root, I am not responsible for anything that happens while flashing this rom. You take responsibility for your actions. Nandroid is your friend.
----------------------------------
Downloads:
Omni Rom for the D2LTE - Droidhype Roms
GAPPS 4.4.2 - PA 0-Day
SuperSU - Chainfire
Kernel (optional) - BMS
----------------------------------
Installing for the first time? Grab the newest full zip from the D2LTE directory. For future updates, just go to Settings -> System Updates and let the magic happen.
HOW TO INSTALL
1. Factory Data reset
2. Wipe System/Data/Dalvik/Cache
3. Install ROM zip from Sdcard
4. Install GAPPS zip from Sdcard
5. Install SuperSU from Sdcard
6. Reboot to home screen to confirm good flash
7. (Optional) Reboot to recovery and flash kernel
TO USE DELTAS, YOU HAVE TO USE TWRP OR PHILZ RECOVERY. CWM WILL NOT WORK BECAUSE IT DISABLES SCRIPTING CAPABILITIES BY DEFAULT. If there's anything that you want the updater to flash automatically after it flashes your update, put the file(s) in the FlashAfterUpdate directory inside your Opendelta folder in your internal storage.
Join the BMS G+ community which will have quicker release info in the future for all things BMS and roms.
Enjoy!
Cherry-picks:
- Multi-window
This build is unofficial, so I don't exactly carry around a changelog. However, you can always check cmxlog for omni and see what's been changed with each version of one of their nightlies. It won't be exact as some have specific device merges, but it will give you a good idea. The dates on my builds will correspond with the officials listed on cmxlog.
You can also check their gerrit or git to see what's been merged.
This question gets posted pretty frequently so if some users could please bookmark this post, we can just repost it when needed. Here are all the links you can peruse for your changelog/update enjoyment.
cmxlog - http://omni.cmxlog.com/4.4/
gerrit - https://gerrit.omnirom.org/#/q/status:merged,n,z
github - https://github.com/omnirom/
G+ - https://plus.google.com/u/0/communities/102450203113748251717
XDA - http://forum.xda-developers.com/omni
XDA:DevDB Information
Omni Rom for the d2tmo, a ROM for the T-Mobile Samsung Galaxy S III
Contributors
GideonX
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: Omni
Version Information
Status: Beta
Created 2014-02-18
Last Updated 2014-02-18
Reserved
FIRST!
Thanks, Will try!
2nd haha anyways will give this a try when i get home c:
Sent from my SGH-T999 using xda app-developers app
Hell yes finally, thanks for this for sure
Sent from my SGH-T999 using Tapatalk
So what I'm getting is that a d2lte build will work on all d2 variants, no updater-script editing required?
Screenies??
As GideonX has said, these builds support all the d2 variants. Everything is automatically done during flashing. You don't need to do anything but flash like normal
downloaded and working
Except for su recconising apps. have tried manual install also just can't seem to make it work. appreciate this rom otherwise. will keep trying. thanks:good:
Is anyone having problems with swipe typing?
trofmoc said:
Except for su recconising apps. have tried manual install also just can't seem to make it work. appreciate this rom otherwise. will keep trying. thanks:good:
Click to expand...
Click to collapse
4.4 needs special twrp jyst in case you restored back on to tw or never updated.
Anyways seems like the rom had little to offer in my personal opinion. I decided to just go an restore previous rom instead
Sent from my SGH-T999 using xda app-developers app
I just installed the Rom! Working great! Thank you.
Wp4Wp4:good:
twrex82 said:
Is anyone having problems with swipe typing?
Click to expand...
Click to collapse
Try PA's gapps. If you're talking about how no letters actually get inputted on the screen even though it is showing the swipe, then that's what you need.
http://forum.xda-developers.com/showthread.php?t=2397942
New D2LTE 2014-02-21 Build - http://goo.gl/zJwFzA
- Had some opendelta issues. Please flash this entire zip this time around, thanks.
- Screen rotation is in settings now.
where are the screen shots for this rom?
Thank you for this rom and one quick question, can't Sync facebook contacts info anymore on the last build?
"Envoyé depuis mon SGH-T999 avec Tapatalk"
Can someone on tmobile verify uploading pictures and video works with this rom in instagram? it may be a kitkat issue with instagram but previously I have gotten a lot of freezes, FC, and reboots while trying to upload video. anybody willing to test this on the latest release?
Dude sorry but are u spamming the threads with the same question?
Sent from my SGH-T999 using xda app-developers app
Anyone have OpenDelta mess up their phone? Every time I booted into recovery it would install the update. Then lost root and my gapps. It was hell trying to get it all back.
Purplezigar said:
Anyone have OpenDelta mess up their phone? Every time I booted into recovery it would install the update. Then lost root and my gapps. It was hell trying to get it all back.
Click to expand...
Click to collapse
I'm using Philz recovery, opendelta updates work as expected. What's your setup?

[ROM][5.1][Flounder] Pure AOSP 3/18/15 [LMY47D]

Hello! I'll be posting pure AOSP builds whenever there are new versions of android released (providing I have the time).
If you choose to use these builds, please ensure you have unlocked your bootloader and have custom recovery installed. I have also noticed that TWRP seems a little wonky at this point, so in order for me to flash it correctly, I had to wipe, then restart recovery, then flash. Hope that's not the case for everyone else.
3/18/15
Added ability to change DPI.
3/15/15
No longer messes with recovery at all. Bluetooth working, data does not force encrypt.
3/13/15
Android 5.1.0_r1 (LMY47D)
This release will wipe your recovery. If anyone needs this changed let me know and I will build another.
1/3/2015
Android 5.0.2_r1 (LRX22G)
Data is now encryptable, meaning your unencrypted data should stick going forward.
Included my own build of stock kernel with Linaro 4.9.3 toolchain.
Fixed bluetooth (thanks Lollipopalooza/Craig)
No longer need to re-flash recovery.
12/6/2014
Android 5.0.1_r1 (LRX22C)
You will need to install separate gapps
You will need to re-flash your custom recovery after you install (you all let me know if I should change this or not, I think I will on future builds)
I am not responsible for anything that happens to your device or to you, yourself while flashing this.
Latest DL Links will be in post #2.
XDA:DevDB Information
Pure AOSP Flounder, ROM for the Nexus 9
Contributors
gchild320
ROM OS Version: 5.0.x Lollipop
Based On: AOSP
Version Information
Status: Stable
Created 2014-12-06
Last Updated 2015-01-03
Downloads
3/18/15
https://www.androidfilehost.com/?fid=95916177934543409
3/15/15
https://www.androidfilehost.com/?fid=95916177934541983
3/13/15
5.1 - https://www.androidfilehost.com/?fid=95916177934540786
1/3/14
Flounder Android 5.0.2_r1 build LRX22G https://www.androidfilehost.com/?fid=95864024717074545
Future FAQ if necessary (let's hope not).
Thank you!!!!
Will test it tomorow
I hope cm12 will build on arm64 soon
Just a few questions. What gapps do you recommend? What twrp ? There is the mainline version and the one @USBhost did. Thanks for the ROM!! Really appreciate seeing this show up.
mpmilestogo said:
Just a few questions. What gapps do you recommend? What twrp ? There is the mainline version and the one @USBhost did. Thanks for the ROM!! Really appreciate seeing this show up.
Click to expand...
Click to collapse
I didn't realize that there were two versions of twrp...I used the one from twrp website.
gchild320 said:
I didn't realize that there were two versions of twrp...I used the one from twrp website.
Click to expand...
Click to collapse
Yep
https://s.basketbuild.com/devs/USBhost/Nexus 9/recovery
I fixed some things
in it
Factory reset will not encrypt data
fixed the device name
look bit better
custom built FIRE-ICE kernel for recovery
USBhost said:
Yep
https://s.basketbuild.com/devs/USBhost/Nexus 9/recovery
I fixed some things
in it
Factory reset will not encrypt data
fixed the device name
look bit better
custom built FIRE-ICE kernel for recovery
Click to expand...
Click to collapse
Hell yes checking this out tomorrow.
build
Awesome !!!! Been waiting for this. How did u build? Last week since their are little options for roms decided to build one on my own and i did a repo sync to Google source but when i did lunch flounder wasn't listed in the build options ?
Flounder still isn't listed just lunch it anyway
Made a video running the ROM. Works very well!!
https://www.youtube.com/watch?v=kVQW-PMepn0
Hello,
can anyone provide a minimal gapps pack? I would like to avoid too much bloatware
http://fitsnugly.euroskank.com/?rom=banks&device=gapps
This maybe what you are looking for.
Hiro Nakamura said:
Hello,
can anyone provide a minimal gapps pack? I would like to avoid too much bloatware
Click to expand...
Click to collapse
belair56 said:
http://fitsnugly.euroskank.com/?rom=banks&device=gapps
This maybe what you are looking for.
Click to expand...
Click to collapse
Well i don't think it's 64bit version or is it ?
Hiro Nakamura said:
Well i don't think it's 64bit version or is it ?
Click to expand...
Click to collapse
From what I understand the apps themselves need to be optimized for 64 internally. These are all Google apps so they are if Google did so. As you update from the play store you don't choose if you're running 64bit or not.
As always I can be wrong.
Hiro Nakamura said:
Well i don't think it's 64bit version or is it ?
Click to expand...
Click to collapse
This is actually a great question.
Adaptive brightness doesn't work. Other than that everything seems to be working.
Edit: Okay so I used an app to look at which sensors were working and which ones weren't... The proximity sensor is not working at all.
omvir said:
Adaptive brightness doesn't work. Other than that everything seems to be working.
Edit: Okay so I used an app to look at which sensors were working and which ones weren't... The proximity sensor is not working at all.
Click to expand...
Click to collapse
Adaptive brightness is working flawlessly. Maybe you had a bad download or flash.
gchild320 said:
Flounder still isn't listed just lunch it anyway
Click to expand...
Click to collapse
I use USBhost's version of TWRP. I tried to flash the rom following directions in OP. It wouldn't flash. First it said for flounder and this device is flounder. Also said something about updater binary. I got this with the other rom also. I tried un-mounting and mounting system, but I still got the error messages. Any ideas?
jlokos said:
I use USBhost's version of TWRP. I tried to flash the rom following directions in OP. It wouldn't flash. First it said for flounder and this device is flounder. Also said something about updater binary. I got this with the other rom also. I tried un-mounting and mounting system, but I still got the error messages. Any ideas?
Click to expand...
Click to collapse
I manually changed it to work with official twrp... Not sure why twrp is calling it volantis instead of flounder but that's why. Also, to get anything to flash in twrp at the moment, I have to reboot recovery after wiping. Hope this helps.

[ROM] BeanStalk Kitkat 4.4.4 Resurected-Unofficial

BeanStalk Kitkat 4-4-4 resurected and remixed. For those of us who prefer stable devices versus half baked lollipops...
Changes:
1. 7 second delay (blank screen) after Sony logo and before boot animation starts - fixed
2. Camera updated to latest (no lag, no focus problems)
3. Latest libs and firmware files
4. Slimlauncher (new open source launcher from Slimroms)
5. Slim keyboard, which is 12mb size, as opposed to bloated CM's 43mb
6. Paranoid bootanimation
7. TWRP recovery
8. Modified version of [CM] X-Honami Kernel with TWRP 2.8 (must be flashed separately, see download section)
Maybe more...
Rom and Kernel (to be flashed separately) are in Download section
Credits: Original Developer Scott; Giveme13s; Alnikki25k; Cyanogenmod; Slimroms; Paranoid; maybe others - let me know if I forgot you
Instructions:
1. If you are on CWM, go to Mounts, mount System/Cache/Data and format each
2. If you are on TWRP, go Wipe/Advanced, wipe System/Cache/Data/Dalvik
3. Flash the rom (you can boot and start using it with included stock-custom kernel), but I recommend X-Honami Kernel by Alnikki25K, modified by me to include TWRP 2.8; for this
4. Flash the attached Zip file (see Download section)
XDA:DevDB Information
[ROM} BeanStalk Kitkat 4.4.4 Resurected-Unofficial, ROM for the Sony Xperia Z1
Contributors
optimumpro
Source Code: https://github.com/scotthartbti
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Version Information
Status: Stable
Stable Release Date: 2015-01-06
Created 2015-01-07
Last Updated 2015-01-07
Screenshots
Screenshots added...
Thanks Man for your work here, Really appreciate that you are working for KK and providing Stable ROM.
Nevermind. I found it.
BlAckXpeRia said:
Download link?
Click to expand...
Click to collapse
Open in Desktop View u ll see Download Section
I`m tried to restore the programs with Titanium backup. Many programs were restored with the original icon of Android and do not run. In Titanium backup noticed "SD card icon" next to an application. Could it be that messed up the names of the SD card path in ROM?
DMondi said:
I`m tried to restore the programs with Titanium backup. Many programs were restored with the original icon of Android and do not run. In Titanium backup noticed "SD card icon" next to an application. Could it be that messed up the names of the SD card path in ROM?
Click to expand...
Click to collapse
I am running this rom and have no problems with Titanium. You shouldn't have problems if you were running CM based rom before, but some stock apps won't work. Also, you have to tinker with Titanium restore options. Also, if you are trying to restore system app, you might have a problem (in this case, manually transfer it to /system/apps. I don't think Kitkat allows you to install apps on SD card (unless you manually transfer them from internal storage)....
DMondi said:
I`m tried to restore the programs with Titanium backup. Many programs were restored with the original icon of Android and do not run. In Titanium backup noticed "SD card icon" next to an application. Could it be that messed up the names of the SD card path in ROM?
Click to expand...
Click to collapse
TB is a ****ty App guys gives trouble now and then For Apps backup best App i have used is "Super Backup", it will save all ur apps apk files
optimumpro said:
I am running this rom and have no problems with Titanium. You shouldn't have problems if you were running CM based rom before, but some stock apps won't work. Also, you have to tinker with Titanium restore options. Also, if you are trying to restore system app, you might have a problem (in this case, manually transfer it to /system/apps. I don't think Kitkat allows you to install apps on SD card (unless you manually transfer them from internal storage)....
Click to expand...
Click to collapse
solved problem system.ui?
e30luismi said:
solved problem system.ui?
Click to expand...
Click to collapse
No problem Flash again with full wipe
how to flash the kernel?
I have to flash the kernel after flashing the rom and by using recovery?ryt? Sry for dumb ques i hav never flashed a kernel.thankyou
hitesh1792 said:
I have to flash the kernel after flashing the rom and by using recovery?ryt? Sry for dumb ques i hav never flashed a kernel.thankyou
Click to expand...
Click to collapse
Yes
I tried this rom just after it came out.
I was pretty impressed by the camera experience.
But I think that BeanStalk is a little bit "dirty".
@optimumpro
Could you make a PA Bulid with all of your device specific changes.
I also think that an stable kitkat is better than some hacky lollipop without camera.
Thanks in advance
mischa_martin
Or Liquid Smooth KK Bug free
abbychauhan said:
Or Liquid Smooth KK Bug free
Click to expand...
Click to collapse
mischa_martin said:
I tried this rom just after it came out.
I was pretty impressed by the camera experience.
But I think that BeanStalk is a little bit "dirty".
@optimumpro
Could you make a PA Bulid with all of your device specific changes.
I also think that an stable kitkat is better than some hacky lollipop without camera.
Thanks in advance
mischa_martin
Click to expand...
Click to collapse
I really can't touch PA or Liquid, because original threads are active. Beanstalk thread is closed. They need to be closed, since there is no further development. I have also fixed Dirty Unicorn problems, but it can't be built from sources and the current author is not responding to my PMs...
optimumpro said:
I really can't touch PA or Liquid, because original threads are active. Beanstalk thread is closed. They need to be closed, since there is no further development. I have also fixed Dirty Unicorn problems, but it can't be built from sources and the current author is not responding to my PMs...
Click to expand...
Click to collapse
Oh thats sad, Thanks for the Reply
optimumpro said:
I really can't touch PA or Liquid, because original threads are active. Beanstalk thread is closed. They need to be closed, since there is no further development. I have also fixed Dirty Unicorn problems, but it can't be built from sources and the current author is not responding to my PMs...
Click to expand...
Click to collapse
Really?
Correct me if im wrong but I thought, that opensource means that everyone can copy the source, modify it and bulid it.
Of course with credits given to the author.
Take CM Unoffical bulids as an example. There are soo many of them.
Regards,
mischa_martin
mischa_martin said:
Really?
Correct me if im wrong but I thought, that opensource means that everyone can copy the source, modify it and bulid it.
Of course with credits given to the author.
Take CM Unoffical bulids as an example. There are soo many of them.
Regards,
mischa_martin
Click to expand...
Click to collapse
You are right, but neither liquid nor dirty unicorn builds from source (multiple errors indicating missing resources) and errors in script. Sometimes, developers change a few things in sources to make it impossible to build for others. This is a way to go around GPL 3. I am not saying liquid and dirty unicorn do it, but somehow they can build, but others can't. In addition, XDA has a rule: only one rom of the same version per device forum
Any mirrors?
Looks nice, and will look forward to try it, but the download time is estimated to 3-5 hours, and I have already got download-error twise. Thanks
golagha11 said:
Looks nice, and will look forward to try it, but the download time is estimated to 3-5 hours, and I have already got download-error twise. Thanks
Click to expand...
Click to collapse
I had the same problem with every download from xda servers.
But I think it depends on your location. Im from germany and after I connected to my favorite free vpn it worked flawlessly with 1,2mbps.
http://freevpn.me/accounts
Regards,
mischa_martin

Cyanogenmod 14.1 official nightly

Hi all,
Seems there is a CM14.1 nightly now available for find7s on the official CM site, link here: hxxps://download.cyanogenmod.org/?type=nightly&device=find7s
Was just wondering if anyones given it a go yet, and if so knows whether or not it supports LVM and how stable the rom is?
Haven't found any info that states one way or the other, hoping someone knows.
Thanks in advance.
About the storage support:
Stock -> YES
LVM - NO
Coldbird - Not tested
Chinese - YES
New display:
Cant test it because i havent the new display
At the moment no theme engine
Is stable for daily driver FROM MY POINT OF VIEW
Its a little bit weird that there is not available yet on the page https://www.cmxlog.com/14.1/
Hope it will appear here soon as well as it is already here:
(Find 7a) https://download.cyanogenmod.org/?device=find7
and
(Find 7) https://download.cyanogenmod.org/?device=find7s
Dirty flashed cm-14.1-20161205-NIGHTLY over cm-14.1-20161201-UNOFFICIAL via menu CyanogenMod updates. Everything seems to be OK. One remark: boot time when update is completed is quite long, so be patient. Of course in order to not see "SD corrupted" it is necessary to flash cm-13.0-find7-unified-storage-patch.zip
EDIT: Just for your information: boot animation CM face is gone. Now there is word "android" in plain white.
great news
Finally there we are changes logs:
https://www.cmxlog.com/14.1/find7/
https://www.cmxlog.com/14.1/find7s/
Android 7.1.1 in the next nightly
CyanogenMod will never support LVM.
This is 7.1 right? Or is it 7.0? I downloaded the 7.1 GAPPS, which should be correct for this build...
I updated it, and it runs smooth without any force crashes and nonsense. (Besides the time I tried to open an app not built for nougat, =P. If you're hesistant about updating, don't think, just do it.
Injected said:
About the storage support:
Stock -> YES
LVM - NO
Coldbird - Not tested
Chinese - YES
New display:
Cant test it because i havent the new display
At the moment no theme engine
Is stable for daily driver FROM MY POINT OF VIEW
Click to expand...
Click to collapse
i want to upgrade from an existing cm 13 installation, it is alredy unified with the chinese method, did you made a clean installation? what about the need of flashing Wuxianlin's patch after every upgrade? thanks in advice
-lorenzo- said:
i want to upgrade from an existing cm 13 installation, it is alredy unified with the chinese method, did you made a clean installation? what about the need of flashing Wuxianlin's patch after every upgrade? thanks in advice
Click to expand...
Click to collapse
Yup u can do that. After flashing cm14.1 official, u might wanted to flash cm13 patch by wuxianlin, then flash the gapps and lastly wipe the cache and dalvik
-lorenzo- said:
i want to upgrade from an existing cm 13 installation, it is alredy unified with the chinese method, did you made a clean installation? what about the need of flashing Wuxianlin's patch after every upgrade? thanks in advice
Click to expand...
Click to collapse
And yes you need to flash Wuxianlin's patch after every upgrade just for aesthetic purpose, that is to fix the SDcard damage info bug, unless CM find7 maintainer will fix that, and when it happen you will no longer need to flash the Wuxianlin's CM13 patch.
I am on crdroid right now (LVM) and i really want to try this. Please tell me in short how to revert back to stock partition and then flash this.
Yashraj Chawla said:
I am on crdroid right now (LVM) and i really want to try this. Please tell me in short how to revert back to stock partition and then flash this.
Click to expand...
Click to collapse
1. If you are on LVM you need to back to stock partition layout. Just google for "Find 7 unbrick tool" for procedure. "Sahara" tool is available for download here: http://d3bzg7dsosz4ht.cloudfront.net/OTA/Find7/FIND7WX_12_A.09_140810.tgz
2. Setup Chinese partition layout: http://forum.xda-developers.com/showpost.php?p=64149659&postcount=3
3. Flash wuxianlin's version of TWRP: link available under point 10. on http://community.oppo.com/en/thread-47844-1-1.html
4. Flash cm-14.1 last official nightly build: https://www.cmxlog.com/14.1/find7/
5. Flash nano open gaaps
6. Flash SU
7. Flash cm-13.0-find7-unified-storage-patch
8. Enjoy newest, very stable and fast Android 7.1.1.
Yashraj Chawla said:
I am on crdroid right now (LVM) and i really want to try this. Please tell me in short how to revert back to stock partition and then flash this.
Click to expand...
Click to collapse
rafal.polska.b said:
1. If you are on LVM you need to back to stock partition layout. Just google for "Find 7 unbrick tool" for procedure. "Sahara" tool is available for download here: http://d3bzg7dsosz4ht.cloudfront.net/OTA/Find7/FIND7WX_12_A.09_140810.tgz
2. Setup Chinese partition layout: http://forum.xda-developers.com/showpost.php?p=64149659&postcount=3
3. Flash wuxianlin's version of TWRP: link available under point 10. on http://community.oppo.com/en/thread-47844-1-1.html
4. Flash cm-14.1 last official nightly build: https://www.cmxlog.com/14.1/find7/
5. Flash nano open gaaps
6. Flash SU
7. Flash cm-13.0-find7-unified-storage-patch
8. Enjoy newest, very stable and fast Android 7.1.1.
Click to expand...
Click to collapse
OMG! No! Just need to flash "unlvm" script to revert to stock layout, that is supported by this ROM. Then flash ROM, gapps and SuperSU.
Anyway, to configure chinese storage, if desired, step 1 is unnecesary: just step 2 is enough.
And, of course, don't forget to make a backup in external SD because any choosen method (unbrick tool, setup chinese storage or revert LVM) erases both data and internal card.
Edit:
Here you can find the removelvm_find7_FULL_WIPE script needed to revert to stock layout; flashing it from TWRP is the only you need. When in stock again, you can proceed as usual flashing ROM, gapps and everything you want.
DELETE
Thanks everyone for the info, might hold off as I have LVM, here's hoping that namelessrom put out an official nougat rom in the not too distant future.
New Display is not supported
Injected said:
About the storage support:
Stock -> YES
LVM - NO
Coldbird - Not tested
Chinese - YES
New display:
Cant test it because i havent the new display
At the moment no theme engine
Is stable for daily driver FROM MY POINT OF VIEW
Click to expand...
Click to collapse
New Display is not supported. Colors, ghosting, and bleeding will still be running wild just like all older CM.
The only Custom ROM on the planet that fully supports new display is OmniROM and it seems that they could use some help. Please support their effort: omnirom.org
javier.pc said:
OMG! No! Just need to flash "unlvm" script to revert to stock layout, that is supported by this ROM. Then flash ROM, gapps and SuperSU.
Anyway, to configure chinese storage, if desired, step 1 is unnecesary: just step 2 is enough.
And, of course, don't forget to make a backup in external SD because any choosen method (unbrick tool, setup chinese storage or revert LVM) erases both data and internal card.
Edit:
Here you can find the removelvm_find7_FULL_WIPE script needed to revert to stock layout; flashing it from TWRP is the only you need. When in stock again, you can proceed as usual flashing ROM, gapps and everything you want.
Click to expand...
Click to collapse
Thank you guys i just did that and i must say CM - 14.1 is Lovely :good:
Yashraj Chawla said:
Thank you guys i just did that and i must say CM - 14.1 is Lovely :good:
Click to expand...
Click to collapse
It is. But omnirom support substratum theme.
StormTrooper89 said:
It is. But omnirom support substratum theme.
Click to expand...
Click to collapse
I think you can install substratum theme in CM14.1 (but only substratum themes that support Android 7.1.1), since there no theme engine inside CM14.1

Categories

Resources