Android rocks on the tilt
any update on Bluetooth?
Bluetooth headset and music both work for me.
I haven't tried other potential bluetooth uses (keyboard, mouse, etc).
What bluetooth use cases are you thinking of that maybe don't work?
It was really necessary to open a new thread for this question
Car BT works perfectly.
Hello
I just got the Sound ID 510 Bluetooth Headset
& want a USB device that will conect it to my PC
so can listen to Music on my Bluetooth headset from my PC
does anyone know whats the USB device called or where i can find one please
Will this do the Job - Bluetooth 2.0 Dongle Adapter
Thanks
I'm not an expert on these things, but I believe you need to make sure that whatever device you getting can handle A2DP. That's the Bluetooth profile that allows for High Quality audio to be transmitted through BT. What I'm not sure is if the A2DP is a software controlled, or hardware controlled thing.
Followup: I did find this device:
http://usa.asus.com/Product.aspx?P_ID=kMQYNVBNRWehBd3U&content=specifications
Which specifically lists A2DP as one of the supported profiles, so based on that it might be a hardware thing. BTW, the A2DP for this device is only supported on a Windows Machine, not Mac.
Hello all, this is my first post after a long time viewing this great forum.
I was wondering, could the HTC Desire be turned into a wireless audio receiver with A2DP? My stereo bluetooth headset died recently, and I got used to watching movies on the PC while using them as headphones. So I was wondering if it was possible to turn the phone into a receiver in the same manner.
If it's not possible, is it a hardware limitation?
Thanks.
+1 for this thread,
-Even i was looking for same app ,so that i can connect my desire to my laptop using bluetooth and use it as a wireless head phone.
-I lost my head phone too, I have Desire's hands free , i was wondering if i could use it as a head set..for my pc through bluetooth..!!
harish.awe said:
+1 for this thread,
-Even i was looking for same app ,so that i can connect my desire to my laptop using bluetooth and use it as a wireless head phone.
-I lost my head phone too, I have Desire's hands free , i was wondering if i could use it as a head set..for my pc through bluetooth..!!
Click to expand...
Click to collapse
I've tried searching for any input on this subject, but I couldn't find any real info about it.
We know the Desire can transmit stereo over A2DP, and can receive mono when you are talking with a BT device. But does this indicate the ability to receive stereo over A2DP? I hope there is no hardware limitation for that.
If it is possible, I guess an application would act like an A2DP device, so that the BT software on the PC would recognize it as such. I'm really hoping to see such a feature, or at least to know if it's possible.
i have a mini cooper, and it supports Iphone docking. it also supports msc drivers, but with newer android phones, MSC isn't really available.
anyway, i just realized there are devices that basically (Bluewave Bluetooth Audio Receiver) that emulate the iphone, but gets it's signal via bluetooth. so i can pair my phone to it, which would in turn relay the audio to my car...and hopefully, my car would think it's an iphone, and all the corresponding features would still work.
has anyone had any experience with these? would i be able to control my phone audio via my car's control? would the headset display song titles?
anyonw know one that support apt-x?
(@Admins I think this is the correct forum to post this in, but please feel free to move it if I've chosen the wrong forum. I'm still figuring out exactly what category my device is in)
TL;DR - Trying to figure out if it's possible to get an external USB Bluetooth dongle working on my radio instead of the built-in one, so I can connect to all types of bluetooth devices, not just streaming audio
Hi all,
I'm searching for a possible solution that would allow me to connect my Android radio (AUTOPUMPKIN AA0495B, using a PX5, MCU CSN2_06252019_163051) to a Dual XGPS160 device. I installed this stereo in my track car for the purpose of running Harry's Lap Timer; currently the app is running perfectly, with a wired OBDLink EX in use for OBDII data and also connecting to a GoPro via WiFi to control the camera. The last piece of the puzzle is I want to get an XGPS160 connected for better GPS data capture (10Hz vs 1Hz of the radio's GPS). After hours spent trying to get it to pair and connect to the device, I emailed AUTOPUMPKIN support and they confirmed that this radio cannot connect to such devices, as the Bluetooth module in the radio is essentially a glorified bluetooth headset and can only connect for streaming audio (I haven't been able to determine the model number of the bluetooth module it uses). My hope is there is a USB Bluetooth dongle that I could plug into the radio and then have the radio use that instead, which would then allow it to connect to the XGPS160 (and any other type of bluetooth device).
When I go into the Car Settings on the radio, it has the following options available for bluetooth:
IVT i140
IVT i145
FC6000TN
GOC_BC5
KD6
KD6 is what is selected from the factory. Please correct me if I'm wrong, but my understanding is this list is basically the different bluetooth hardware models the radio has driver support for? If I'm correct on that, then I'm also guessing if I were to plug in a bluetooth dongle using one of the other models and change this setting, the radio would use that instead of the built-in bluetooth? I don't use the bluetooth audio streaming or phone tethering feature, so I don't care if I lose those features if it allows me to connect the radio to the XGPS160. As long as the WiFi keeps working I'm ok with it.
Sorry if I'm asking any stupid questions; I'm a programmer by background, but even after hours of reading this forum my knowledge about the hardware in these Android radio units is still very limited. That being said, I'm not opposed to modifying config files to get this working. I have Android Developer mode enabled and I can connect to the radio via ADB; I spent some time looking at the file structure and various config files so modifying those if needed shouldn't be a problem for me.
thanks!
There was another (lengthy) thread on the subject of bluetooth dongles around here somewhere. You will have to do a search for it. If I remember correctly you had to open your head unit and physically disconnect your original bt module... and even with that there was limited success in getting the thing to actually work....and of those who claimed they did get it to work also said they couldn't get anything more to connect to the dongle than what the original BT could handle
It's too bad too. I have a sound processor on my system which uses an app through BT on my phone to make adjustments and I was HOPING it would connect to the head unit. It won't
BTW... your obdlink ex usb will also work with Torque (Pro). I use it with torque and it's blazing fast and reliable.... a lot more than a BT connection!
deja100 said:
(@Admins I think this is the correct forum to post this in, but please feel free to move it if I've chosen the wrong forum. I'm still figuring out exactly what category my device is in)
TL;DR - Trying to figure out if it's possible to get an external USB Bluetooth dongle working on my radio instead of the built-in one, so I can connect to all types of bluetooth devices, not just streaming audio
Hi all,
I'm searching for a possible solution that would allow me to connect my Android radio (AUTOPUMPKIN AA0495B, using a PX5, MCU CSN2_06252019_163051) to a Dual XGPS160 device. I installed this stereo in my track car for the purpose of running Harry's Lap Timer; currently the app is running perfectly, with a wired OBDLink EX in use for OBDII data and also connecting to a GoPro via WiFi to control the camera. The last piece of the puzzle is I want to get an XGPS160 connected for better GPS data capture (10Hz vs 1Hz of the radio's GPS). After hours spent trying to get it to pair and connect to the device, I emailed AUTOPUMPKIN support and they confirmed that this radio cannot connect to such devices, as the Bluetooth module in the radio is essentially a glorified bluetooth headset and can only connect for streaming audio (I haven't been able to determine the model number of the bluetooth module it uses). My hope is there is a USB Bluetooth dongle that I could plug into the radio and then have the radio use that instead, which would then allow it to connect to the XGPS160 (and any other type of bluetooth device).
When I go into the Car Settings on the radio, it has the following options available for bluetooth:
IVT i140
IVT i145
FC6000TN
GOC_BC5
KD6
KD6 is what is selected from the factory. Please correct me if I'm wrong, but my understanding is this list is basically the different bluetooth hardware models the radio has driver support for? If I'm correct on that, then I'm also guessing if I were to plug in a bluetooth dongle using one of the other models and change this setting, the radio would use that instead of the built-in bluetooth? I don't use the bluetooth audio streaming or phone tethering feature, so I don't care if I lose those features if it allows me to connect the radio to the XGPS160. As long as the WiFi keeps working I'm ok with it.
Sorry if I'm asking any stupid questions; I'm a programmer by background, but even after hours of reading this forum my knowledge about the hardware in these Android radio units is still very limited. That being said, I'm not opposed to modifying config files to get this working. I have Android Developer mode enabled and I can connect to the radio via ADB; I spent some time looking at the file structure and various config files so modifying those if needed shouldn't be a problem for me.
thanks!
Click to expand...
Click to collapse
No; it must be a specific BT type MD725 realtek device. No, you cant connect all manner of devices due to the hacked BT implementation.
Bob_Sanders said:
There was another (lengthy) thread on the subject of bluetooth dongles around here somewhere. You will have to do a search for it. If I remember correctly you had to open your head unit and physically disconnect your original bt module... and even with that there was limited success in getting the thing to actually work....and of those who claimed they did get it to work also said they couldn't get anything more to connect to the dongle than what the original BT could handle
It's too bad too. I have a sound processor on my system which uses an app through BT on my phone to make adjustments and I was HOPING it would connect to the head unit. It won't
BTW... your obdlink ex usb will also work with Torque (Pro). I use it with torque and it's blazing fast and reliable.... a lot more than a BT connection!
Click to expand...
Click to collapse
Yeh I found that threat in my searches, but no one in there quite mentioned this specific scenario (Selecting one of the other options in the Bluetooth settings) so I wasn't sure. And I'm definitely not opening up the unit and cutting on the hardware; hacking config files I can do all day long, but I have no skills when it comes to soldering so I'd probably just destroy the radio in the process of trying to cut that module :laugh:
Yeh I've run the OBDLink EX with Torque as well for data logging temps on track and it worked flawlessly for that as well. BT is definitely more convenient, especially since most are running apps from their phones, but if you have a dedicated radio like these then it's a no-brainer to permanently wire up a USB device.
marchnz said:
No; it must be a specific BT type MD725 realtek device. No, you cant connect all manner of devices due to the hacked BT implementation.
Click to expand...
Click to collapse
When you say "hacked BT implementation" I'm assuming you mean they don't use the standard Bluetooth stack built into the Android OS? That would make sense, as when I try to do anything with bluetooth from the standard Bluetooth settings menu, it doesn't do anything, doesn't see any devices available for pairing, or anything else. You can only see other devices and pair to them from the PUMPKIN Bluetooth app; the funny thing is it will go through the first steps and show the XGPS160 as being paired, but none of the apps that use the GPS actually see it as a paired device (my OBD dongle shows up, but not the GPS).
I don't understand why they didn't just use standard bluetooth that's already part of the OS, rather than use some hacky custom solution
Quick update since the last post. Spent some time tonight on google looking up the information I could find on those other bluetooth modules in the list of options on my stereo. Based on technical manuals and FCC documents, it appears the FC6000TN and BC5 are audio-only bluetooth chips that only support A2DP profile (basically the same as what I have now with the KD6); Now the IVT i140 and IVT i145 on the other hand appear to be full fledged bluetooth chips, and do support the SPP (Serial Port Protocol) that is needed by the XGPS160 (and many other bluetooth profiles) so in theory that would work. Unfortunately after searching for both of those, all I can find are ones in bare module form (i145 and i140) that would have to be soldered onto the board (assuming the pins are even compatible) and there are no USB versions of them that I could just plug in to my radio's free USB-A slot. The only thing even remotely close that comes up in Google in USB form is this adapter and I'm pretty sure it's not based on the i140 or i145.
Given that my soldering skills are non-existent, it seems I'm pretty much out of luck on getting this to work. Disappointing for sure, as I would gladly have paid more $ for the unit to come with a fully functional bluetooth module instead of this hacked audio only junk they put in it :/
deja100 said:
Quick update since the last post. Spent some time tonight on google looking up the information I could find on those other bluetooth modules in the list of options on my stereo. Based on technical manuals and FCC documents, it appears the FC6000TN and BC5 are audio-only bluetooth chips that only support A2DP profile (basically the same as what I have now with the KD6); Now the IVT i140 and IVT i145 on the other hand appear to be full fledged bluetooth chips, and do support the SPP (Serial Port Protocol) that is needed by the XGPS160 (and many other bluetooth profiles) so in theory that would work. Unfortunately after searching for both of those, all I can find are ones in bare module form (i145 and i140) that would have to be soldered onto the board (assuming the pins are even compatible) and there are no USB versions of them that I could just plug in to my radio's free USB-A slot. The only thing even remotely close that comes up in Google in USB form is this adapter and I'm pretty sure it's not based on the i140 or i145.
Given that my soldering skills are non-existent, it seems I'm pretty much out of luck on getting this to work. Disappointing for sure, as I would gladly have paid more $ for the unit to come with a fully functional bluetooth module instead of this hacked audio only junk they put in it :/
Click to expand...
Click to collapse
Unfortunately, It wouldn't matter which BT you use from the supported BT types, BT implementation is non-standard to do stuff like act as a BT hands-free.
marchnz said:
Unfortunately, It wouldn't matter which BT you use from the supported BT types, BT implementation is non-standard to do stuff like act as a BT hands-free.
Click to expand...
Click to collapse
Yeh, that's extremely disappointing Does anyone know of any Android based radio units that have full working bluetooth? I don't mind buying a new unit for the car if I know it will work with everything.
The old intel sofia units (mtcd as well) had the bluetooth & wifi ibtegrated into the soc...and they had a standard (or at least more profiles) implemented
Enviado desde mi SM-G975F mediante Tapatalk
ikerg said:
The old intel sofia units (mtcd as well) had the bluetooth & wifi ibtegrated into the soc...and they had a standard (or at least more profiles) implemented
Enviado desde mi SM-G975F mediante Tapatalk
Click to expand...
Click to collapse
Bummer they don't make those units anymore :/ Then again, they may not have been powerful enough to run my track timer apps anyway.