Related
So..
AFter couple of tries i have to ask you guys : how to fully wipe my phone after and before flashing 4.1.2 stock via odin ?
I did wipe data/factory reset in CWM but internal memory is still there... So it was not full wipe.. Although when i flashed rom i got that initial setup, but internal memory was intact...
So, how to do full wipe before and after flashing 4.1.2 stock via odin ?
Thanks in advance
Laynee1 said:
So..
AFter couple of tries i have to ask you guys : how to fully wipe my phone after and before flashing 4.1.2 stock via odin ?
I did wipe data/factory reset in CWM but internal memory is still there... So it was not full wipe.. Although when i flashed rom i got that initial setup, but internal memory was intact...
So, how to do full wipe before and after flashing 4.1.2 stock via odin ?
Thanks in advance
Click to expand...
Click to collapse
a full wipe is formatting system, data and caches not sure if odin formats system
Laynee1 said:
So..
AFter couple of tries i have to ask you guys : how to fully wipe my phone after and before flashing 4.1.2 stock via odin ?
I did wipe data/factory reset in CWM but internal memory is still there... So it was not full wipe.. Although when i flashed rom i got that initial setup, but internal memory was intact...
So, how to do full wipe before and after flashing 4.1.2 stock via odin ?
Thanks in advance
Click to expand...
Click to collapse
Hi, to make things easier for you. Download Zoot's Super Wipe Script at the Android Development Section. It's a few pages back but it's worth a look
Was searching for Zoot's Super Wipe Script at Android development.. Cant find it...
p.s. and if i do full wipe before and after flashing rom, wouldn't that erase my rom because of system wipe ?
http://forum.xda-developers.com/showthread.php?t=1983489
Laynee1 said:
Was searching for Zoot's Super Wipe Script at Android development.. Cant find it...
p.s. and if i do full wipe before and after flashing rom, wouldn't that erase my rom because of system wipe ?
Click to expand...
Click to collapse
To answer your question, yes it will. And do a full wipe BEFORE not after flashing a ROM.
Here's the link for the script. Merry Christmas!
SMNE said:
http://forum.xda-developers.com/showthread.php?t=1983489
To answer your question, yes it will. And do a full wipe BEFORE not after flashing a ROM.
Here's the link for the script. Merry Christmas!
Click to expand...
Click to collapse
Thanks mate !!
But one more thing i have to ask you :
If i do full wipe with script before flash (including system wipe) would i be able to flash 4.1.2 via odin then ?? I mean, ive heard that it is only firmware update.. Thanks again
Are you trying to go back to stock? Or flash a custom ROM? Sorry, didn't get you there.
SMNE said:
Are you trying to go back to stock? Or flash a custom ROM? Sorry, didn't get you there.
Click to expand...
Click to collapse
Im on 4.1.2 french stock dll4 atm.. And i have pinch to zoom lag when zooming pictures.. A lot of ppl told me to do full wipe and then flash again 4.1.2 dll4 via odin and it will go away... I did wipe (without wiping system) before flash... And it is there again... So ppl told me to do wipe before and after flash..
So, im trying to do full wipe, flash 4.1.2 again via odin, then wipe after flash...
Laynee1 said:
Im on 4.1.2 french stock dll4 atm.. And i have pinch to zoom lag when zooming pictures.. A lot of ppl told me to do full wipe and then flash again 4.1.2 dll4 via odin and it will go away... I did wipe (without wiping system) before flash... And it is there again... So ppl told me to do wipe before and after flash..
So, im trying to do full wipe, flash 4.1.2 again via odin, then wipe after flash...
Click to expand...
Click to collapse
Ah. You will be able to flash it via Odin. But do not wipe or use the suoer wipe script AFTER. Just do it before flashing. Use the Mega Wipe from the AROMA of Zoot's script.
But be aware, it will erase your internal SD card as well so move every important thing to the external.
SMNE said:
Ah. You will be able to flash it via Odin. But do not wipe or use the suoer wipe script AFTER. Just do it before flashing. Use the Mega Wipe from the AROMA of Zoot's script.
But be aware, it will erase your internal SD card as well so move every important thing to the external.
Click to expand...
Click to collapse
Ok.. I did flashed mega wipe script.. now flashing rom via odin... Fingers crossed
So I have xperia arc S ..
I have installed new rom and I forgot to wipe the cache so now when I turn on phone it just write SONY and then nothing else.. and I can't come in recovery.. to wipe these.. how can I come in recovery?? I have rooted phone..
thanks !!
http://forum.xda-developers.com/showthread.php?p=39552745#post39552745
Saludos.
If you did factory reset, then wiping cache is unnecessary. Factory reset already wipes the cache partition aswell.
Someguyfromhell said:
If you did factory reset, then wiping cache is unnecessary. Factory reset already wipes the cache partition aswell.
Click to expand...
Click to collapse
Hy
How I do factory reset??
Bosty13 said:
Hy
How I do factory reset??
Click to expand...
Click to collapse
I can't go to recovery so I can do factory reset....
Bosty13 said:
So I have xperia arc S ..
I have installed new rom and I forgot to wipe the cache so now when I turn on phone it just write SONY and then nothing else.. and I can't come in recovery.. to wipe these.. how can I come in recovery?? I have rooted phone..
thanks !!
Click to expand...
Click to collapse
with firmware and CWM embed, than take hold back key to start phone
You probably dont have unlocked bootloader and you installed recovery with x-parts from google play store or runned a cmd file to install it.
When you installed the custorm rom you automaticaly lost your recovery. Each time you install a rom you must install recovery too.
Now that your phone wont boot you must flash stock ics/gb again with flash tool seus or pc companion.
Seus and PCC work only with locked bootloaders.
i want to root, unlock bootloader and flash this ROM to my device
but i have several question regarding to the feature of this ROM
it says, same look but much faster..
does this mean:
-it supports HTC Media Link HD?
-it have the ImageSense and able to take photos while recording videos
-it is basically the exact same ROM as the stock one in pretty much everything but more speed?
thanks in advance.. :good:
Yes
Yes, if you can on stock ROM
Yes and it's rooted
well thank's! time for root now muehehehe
Good luck! If you run into problems, just ask in this thread and don't create a new one. Thanks.
Hy guys. I installed Revolution HD on my HTC wile ago. Everything is working perfect except the proximity sensor. In calls the screen won't come off. Does any one has the same problem. And the usb doesn't work anymore on my car stereo dvd.
And how can i downgrade to the original rom my htc from revolution hd. Should i only connect it to htc menager and install the rom or what. Thanks guys.. And so sorry for my bad english.
Greatings from Croatia.
Silvach1 said:
Hy guys. I installed Revolution HD on my HTC wile ago. Everything is working perfect except the proximity sensor. In calls the screen won't come off. Does any one has the same problem. And the usb doesn't work anymore on my car stereo dvd.
And how can i downgrade to the original rom my htc from revolution hd. Should i only connect it to htc menager and install the rom or what. Thanks guys.. And so sorry for my bad english.
Greatings from Croatia.
Click to expand...
Click to collapse
What ARHD are you using? did you do a Full wipe/ wipe dalvik cache. Also make sure u do fastboot erase cache after u fastboot your boot.img.
Dizy801 said:
What ARHD are you using? did you do a Full wipe/ wipe dalvik cache. Also make sure u do fastboot erase cache after u fastboot your boot.img.
Click to expand...
Click to collapse
since i update it from original to ARHD it wont work at all.. i did full wipe in the restore before instaling the arhd or this is something else? Could you help so i can try it?
Silvach1 said:
since i update it from original to ARHD it wont work at all.. i did full wipe in the restore before instaling the arhd or this is something else? Could you help so i can try it?
Click to expand...
Click to collapse
What are the steps you are taking to flash your rom and boot.img?
when you flash your rom it should go into aroma.. choose the option that says do full wipe, if you dont you'll run into problems. after you have flashed it, flash your boot.img in fastboot mode from your computer then do fastboot erase cache to prevent any problems from the boot.img. Can you give me the steps your taking to flash?
Dizy801 said:
What are the steps you are taking to flash your rom and boot.img?
when you flash your rom it should go into aroma.. choose the option that says do full wipe, if you dont you'll run into problems. after you have flashed it, flash your boot.img in fastboot mode from your computer then do fastboot erase cache to prevent any problems from the boot.img. Can you give me the steps your taking to flash?
Click to expand...
Click to collapse
Taking all the steps needed to install it but i didnt do fastboot wipe... i find the wipe steps...
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Boot phone in recovery mode
Wipe data/factory reset
Wipe cache partition
Wipe dalvik cache
Install zip from SD card -> pick rom
i'll do this and try it again.. so i'll get back.. U thing that the problem is in the wiping?
Silvach1 said:
Taking all the steps needed to install it but i didnt do fastboot wipe... i find the wipe steps...
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Boot phone in recovery mode
Wipe data/factory reset
Wipe cache partition
Wipe dalvik cache
Install zip from SD card -> pick rom
i'll do this and try it again.. so i'll get back.. U thing that the problem is in the wiping?
Click to expand...
Click to collapse
Wiping is VERY IMPORTANT! if the necessary steps arn't taken then you can mix up new codes with the old codes leaving you with many different problems. Thats why devs ALWAYS recomment wiping even when Wiping isnt needed to avoid such problems. Also you might want to check your md5 sum from your downloaded rom.. could potentially be a bad download
Dizy801 said:
Wiping is VERY IMPORTANT! if the necessary steps arn't taken then you can mix up new codes with the old codes leaving you with many different problems. Thats why devs ALWAYS recomment wiping even when Wiping isnt needed to avoid such problems. Also you might want to check your md5 sum from your downloaded rom.. could potentially be a bad download
Click to expand...
Click to collapse
Done everything again with wiping all the data and again proximiti sensor doesn't work. Even dont light up red... damn.. maybe the sensor is dead? how can i install the original software on it? do stepst of flash boot boot.img and install it like the ARHD
Silvach1 said:
Done everything again with wiping all the data and again proximiti sensor doesn't work. Even dont light up red... damn.. maybe the sensor is dead? how can i install the original software on it? do stepst of flash boot boot.img and install it like the ARHD
Click to expand...
Click to collapse
I had something like this with my HOX once, but the problem was due to loose connections after i had cracked it open. you can look at the development section to revert back to original. http://forum.xda-developers.com/showthread.php?t=2094113
Dizy801 said:
I had something like this with my HOX once, but the problem was due to loose connections after i had cracked it open. you can look at the development section to revert back to original. http://forum.xda-developers.com/showthread.php?t=2094113
Click to expand...
Click to collapse
So much download here which to download? Really don't now. Help pls. This are stock roms for hox?
Silvach1 said:
So much download here which to download? Really don't now. Help pls. This are stock roms for hox?
Click to expand...
Click to collapse
You need to know what stock rom u need first. Check your phone's CID number. Yes these are all factory stock roms
do i really need to go to HTCDev.com to unlock my bootloader? or is there any other way?
Briztama said:
do i really need to go to HTCDev.com to unlock my bootloader? or is there any other way?
Click to expand...
Click to collapse
You have to go there, they send you a unique code to ur email for your device that unlocks the bootloader
Dizy801 said:
What ARHD are you using? did you do a Full wipe/ wipe dalvik cache. Also make sure u do fastboot erase cache after u fastboot your boot.img.
Click to expand...
Click to collapse
what the heck is a dalvik cache? what is full wipe? omg i did now know anything about rooting looks like it is not that simple
man probly it's better to avoid any root/flashing anyway to avoid problems like that guy faces
my stock is good but i don't know the fully unlocked experience.. been hesitating due to these kind of problem...
and probly i can't go back either
Briztama said:
what the heck is a dalvik cache? what is full wipe? omg i did now know anything about rooting looks like it is not that simple
man probly it's better to avoid any root/flashing anyway to avoid problems like that guy faces
my stock is good but i don't know the fully unlocked experience.. been hesitating due to these kind of problem...
and probly i can't go back either
Click to expand...
Click to collapse
Its simple once u get used to it. looks a lot more complicated until u have it finished lol. wiping and dalvik cache is an option in recovery.hard to miss when installin roms. no need to worry about that with unlocking.
Dizy801 said:
You need to know what stock rom u need first. Check your phone's CID number. Yes these are all factory stock roms
Click to expand...
Click to collapse
I just downloaded and instal 4.0.1. ARHD 9.9 and the usb mass storage works again but proximity sensor doesn't. Loks like it going on service cous it's probably broaken.
The rooting the HOX is not so complicated download some things and ur on new rom... Everything is going on in CMD line so nothing couldn't get wrog...
Silvach1 said:
I just downloaded and instal 4.0.1. ARHD 9.9 and the usb mass storage works again but proximity sensor doesn't. Loks like it going on service cous it's probably broaken.
The rooting the HOX is not so complicated download some things and ur on new rom... Everything is going on in CMD line so nothing couldn't get wrog...
Click to expand...
Click to collapse
Try a different rom other then ARHD?
I have a big problem. I was runnig Ditto n3 rom but i had random reboots.
I decide to go back to my (restore)Omni rom and return was good but then ,bootloop.
I am not able to install any rom,i cant restore nothing.i try evrything,,,format sistem.,wipe dalvik ,cach but nothing.
Can you help me ,please???
Edit:I can go to the recovery or download mode ,i can flash any rom but get a BOOTLOOP.
Tnx
Anyone,please.
dzontra11 said:
I have a big problem. I was runnig Ditto n3 rom but i had random reboots.
I decide to go back to my (restore)Omni rom and return was good but then ,bootloop.
I am not able to install any rom,i cant restore nothing.i try evrything,,,format sistem.,wipe dalvik ,cach but nothing.
Can you help me ,please???
Tnx
Click to expand...
Click to collapse
what recovery did you use in restoring omni rom?
warlycastro said:
what recovery did you use in restoring omni rom?
Click to expand...
Click to collapse
First i try to restore my older Ditto n3 rom ,bootloop(with philz),after that i flash twrp and try to restore Omni but again bootloop.
Tnx
Do you make a factory reset after restoring? Maybe it couse the Bootloops
dzontra11 said:
First i try to restore my older Ditto n3 rom ,bootloop(with philz),after that i flash twrp and try to restore Omni but again bootloop.
Tnx
Click to expand...
Click to collapse
2.6.3.1 TWRP? Sounds like bad flashing. Have tried "Enable md5 verification" in TWRP while restoring? Was it a complete backup from TWRP? Kernel? Modem? Boot? System?
I have not tried that but now i flash again philz via odin and try again but seems like Bootloop ,again,
Yes, complete backup from twrp and also complete backup from philz.
gencho81 said:
Do you make a factory reset after restoring? Maybe it couse the Bootloops
Click to expand...
Click to collapse
Nope.
dzontra11 said:
I have not tried that but now i flash again philz via odin and try again but seems like Bootloop ,again,
Yes, complete backup from twrp and also complete backup from philz.
Click to expand...
Click to collapse
Before you restore
Make sure to:
1. In Philz, Wipe Data / Factory Data Reset then Clean Install a new ROM
2. Wipe Data / Factory Data Reset then Wipe Data Factory Reset
3. Wipe Cache and Dalvik's Cache
4. Flash TWRP
5. Restore BACKUP from TWRP
Try it!
warlycastro said:
Before you restore
Make sure to:
1. In Philz, Wipe Data / Factory Data Reset then Clean Install a new ROM
2. Wipe Data / Factory Data Reset then Wipe Data Factory Reset
3. Wipe Cache and Dalvik's Cache
4. Flash TWRP
5. Restore BACKUP from TWRP
Try it!
Click to expand...
Click to collapse
I will try right now and report later..tnx in advance.
Failed.
Seems like i have a big problem here,,,,,any ideas??
how about flashing omni rom again? fresh flash.
warlycastro said:
how about flashing omni rom again? fresh flash.
Click to expand...
Click to collapse
Cant,i try but cant Twrp report an error e:bla,bla something...
deniz4700 said:
Cvm modun eski versiyonunda yedekleme sorunu olmuştu
GT-I9505 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
What?
Can i flash some prerooted stock rom now,via pc odin or something?
dzontra11 said:
Seems like i have a big problem here,,,,,any ideas??
Click to expand...
Click to collapse
Yes, you cant seem to write correct titles that are descriptive of topic.
Look,i need help here,so ,please if you can help to me it wiil be great.
I try again evrything i know but still stack on Samsung lognly hope is to flash some stock prerooted rom ,i think.
So ,anyone can recomended some stock rom for me?
Tnx
Anyone?
Sent from my Transformer TF101 using xda app-developers app
Please help me :crying:.. i'm trying to flash to stock firmware with odin.. everything is fine the process also pass/reset..
but after the reboot it just same like before.. the wallpaper/locksreen/rooted and all the setting is same.. not a single things change
why odin not resetting/restore to factory my note 8 .. forgive me for the bad english
N5100 version
Because not all official stock firmware come with wipe command... so wipe it yourself...
Go to settings --> backup and reset ---> factory data reset.
edan1979 said:
Because not all official stock firmware come with wipe command... so wipe it yourself...
Go to settings --> backup and reset ---> factory data reset.
Click to expand...
Click to collapse
thanks you.. its working, everything restore to factory:victory: