Develop Bugs

[GUIDE][HOW TO][N900W8]Canadian Note 3 - KitKat 4.4.2 ROM with WIFI/BT/NFC Fix

*MEXICAN USERS, PLEASE SKIP TO PART 4*
The following is for Canadian Note 3 users - model number N900W8. Please do not attempt the following on ANY other device (including the N900T). I am not responsible for your phone or any damages, so perform at your own risk.
[PART ONE - UPGRADE FROM 4.3 TO 4.4.2 STOCK]
1. Download the following Stock TelCel (Mexican) 4.4.2 files.
http://pc.cd/7kH (AP - System)
http://pc.cd/gXH (BL - Bootloader)
http://pc.cd/K7H (PIT - Repartition)​
2. Download the following Canadian modem and CSC.
http://fs1.androidfilesharing.com/d0ed8bf1a29d2c01 (CP - Modem)
http://fs1.androidfilesharing.com/6cb078fbe8a64316 (CSC - Carrier Specific Code)​
3. Download Odin 3.09.
http://fs1.androidfilesharing.com/7625af2fbef08abc​
4. Backup important files to your computer and boot into download mode (hold HOME+VOLUME DOWN during boot).
5. Plug the phone into your computer, preferably with the cable that came with the phone.
6. Open Odin 3.09 and load the 5 files you just downloaded into their corresponding spots.
7. UNCHECK Re-Partition. Make sure Auto Reboot and F. Reset Time are CHECKED.
http://i.imgur.com/f5vVc5h.jpg​
8. Click start and wait for it to finish.
*Notes*
-This will factory reset your device.
-There has been some controversy over whether to leave Re-Partition checked or unchecked. Try unchecked first, then checked if it doesn't boot up.
-If you are having problems, try booting into recovery (hold HOME+VOLUME UP during boot) and factory resetting your device and restarting.
-If you boot and find bloatware from a different carrier or something isn't working, open the dialer and type *#272*YOURIMEI# and change your CSC to the appropriate carrier. This will factory reset your phone.
-We have the ability to revert back to 4.3 (flashing stock 4.3 rom in Odin), but the method isn't concrete. You should be ready to stay on 4.4.2 if you are going to flash it.
-If you are having issues writing to the SD Card, take a look at this thread - http://forum.xda-developers.com/showthread.php?t=2617921
__________________________________________________
[PART TWO - ROOT AND CUSTOM RECOVERY]
1. Download Chainfire's CF-Auto-Root file.
http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip​
2. Load into Odin 3.09's AP section and flash in download mode.
3. Download BigBiff's N900W8 TWRP recovery OR Chenglu's CWM recovery.
TWRP - http://techerrata.com/bigbiff/hltecan-recovery.img.tar​CWM - http://d-h.st/users/xiaolu/?fld_id=31963​
4. Load into Odin 3.09's AP section and flash in download mode.
*Notes*
-Assume this will trip Knox warranty to 0x1. Some users have reported otherwise, but just be ready for it.
__________________________________________________
[PART THREE - CUSTOM 4.4.2 ROM AND KERNEL + WIFI/NFC FIX]
1. Download your favourite custom 4.4.2 rom from the N9005 forums.
2. Download custom (N900T) 4.4.2 kernel.
Custom (CivZ) - http://www.androidfilehost.com/?w=files&flid=12054​Custom (Wootever) - http://forum.xda-developers.com/showthread.php?t=2581888​
3. Download the WIFI/NFC fix (NB7 Source)
fs1.androidfilesharing.com/2a941b72c218c505​
4. Place files on SD card. Some roms are known to wipe your internal storage.
5. Boot into TWRP Recovery and wipe system, data, cache, and dalvik cache.
6. Install custom rom, kernel, and WIFI/NFC fix, then reboot.
*Notes*
-A custom rom alone will break WIFI and NFC, follow these instructions to install a custom rom and fix connectivity.
-The stock kernel caused connectivity issues on custom roms, use CivZ's custom kernel
__________________________________________________
[PART FOUR - MEXICAN USERS]
1. Complete PART ONE using these files instead of the ones above.
http://pc.cd/7kH (AP - System)
http://pc.cd/gXH (BL - Bootloader)
http://pc.cd/dXH (CP - Modem)
http://pc.cd/K7H (PIT - Repartition)
http://pc.cd/97H (CSC - Carrier Specific Code)​
2. Complete PART TWO of this post. (Root and install TWRP)
3. Make a full nandroid backup via TWRP
4. Complete PART THREE of this post (custom rom, kernel, and fix).
5. To fix connectivity, boot into recovery and restore ONLY the EFS files and the modem from the nandroid you made and reboot.
__________________________________________________
Who should you thank?
@kirabyte - Original TelCel N900W8 4.4.2 base and links
@Chainfire - Root
@bigbiff - TWRP
@Chenglu - CWM
@civato - Custom Kernel
@Wootever - Custom Kernel
@miscom - Flashable fix base
@turilo - Help with WIFI fix and testing
@mixxy - Help with NFC fix and testing
@xBlackDroid - Signal fix method for Mexican variant
__________________________________________________
Last but not least, PLEASE read the thread in its entirety before you ask any questions.
Thank you! Good luck and happy flashing.

Oogar said:
Thought this should branch off into its own thread.
I've managed to successfully install 4.4.2 onto my Rogers Note 3. I extracted the modem and CSC from the latest Rogers 4.3 and flashed with Odin 3.09 along with TelCel (Mexican) files below.
Use the PIT, BL, and AP from this website --> http://androidmx.net/2014/01/actualiza-tu-galaxy-note-3-n900w8-a-kitkat-4-4-2/
Use the CP and CSC from here --> https://www.mediafire.com/?5ww5zzb2s501njt
There is a little bit of controversy on this...but I did NOT have re-partition checked in Odin. I would try having it unchecked first, and play around after if you have issues.
Rooted with --> http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
Flash in Odin 3.09 using AP.
Happy flashing!
Click to expand...
Click to collapse
And what kernel was used to accomplish this? And have you tried to go back to 4.3 with this procedure?

TheAxman said:
And what kernel was used to accomplish this? And have you tried to go back to 4.3 with this procedure?
Click to expand...
Click to collapse
Stock kernel, Mexican and Canadian variants are both N900W8.
I was able to flash back to stock 4.3 with Odin a couple times last night. I will do it one more time and confirm with you though.

Oogar said:
Stock kernel, Mexican and Canadian variants are both N900W8.
I was able to flash back to stock 4.3 with Odin a couple times last night. I will do it one more time and confirm with you though.
Click to expand...
Click to collapse
I am impressed, nice work. So stock kernel, and you for sure can go back to 4.3? I believe you, but, wow. Try once more please, as this could and can be bad if it has not been tested. Thank you sir for you work and info.

TheAxman said:
I am impressed, nice work. So stock kernel, and you for sure can go back to 4.3? I believe you, but, wow. Try once more please, as this could and can be bad if it has not been tested. Thank you sir for you work and info.
Click to expand...
Click to collapse
Just successfully flashed back to stock Rogers 4.3.
Flashed stock via odin, first boot was hanging so I factory reset in recovery. Works fine now.

Thanks for this bro!!

this is probably more wishful thinking than any real hope of it having happened yet - but I have to join the hordes to ask the one question - has anyone flashed on TMOBILE Sucessfully yet? (Intellectually I am sure I know the answer - but I feel compelled to ask the question just the same)..

http://forum.xda-developers.com/showpost.php?p=49524853&postcount=543
Here's how a Canadian user got his to work for more proof. You folks are so lucky & im so jealous! Key thing that he did was check re-partition

RMXO said:
http://forum.xda-developers.com/showpost.php?p=49524853&postcount=543
Here's how a Canadian user got his to work for more proof. You folks are so lucky & im so jealous! Key thing that he did was check re-partition
Click to expand...
Click to collapse
Yeah I saw this as well. I had it not work with re-partition checked, and it's worked every time since then with re-partition unchecked. Not sure what the implication of this is yet.

Oogar said:
Thought this should branch off into its own thread.
I've managed to successfully install 4.4.2 onto my Rogers Note 3. I extracted the modem and CSC from the latest Rogers 4.3 and flashed with Odin 3.09 along with TelCel (Mexican) 4.4.2 files below.
Use the PIT, BL, and AP from this website --> http://androidmx.net/2014/01/actualiza-tu-galaxy-note-3-n900w8-a-kitkat-4-4-2/
Use Rogers Modem (CP) --> http://www.mediafire.com/download/1oias85eoz8ykuh/Rogers Modem (CP).tar
Use Canadian Multi CSC-->http://www.mediafire.com/download/xn11kh614eag7ir/Canadian Multi CSC.tar (change CSC - Open dialer --> *#272*YOURIMEI# --> will factory reset)
There is a little bit of controversy on this...but I did NOT have re-partition checked in Odin.
Rooted with --> http://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip
Flash in Odin 3.09 using AP.
Turn off Reactivation Lock.
CWM Recovery --> http://d-h.st/users/xiaolu/?fld_id=31400
Flash in Odin 3.09 using AP.
Happy flashing!
Edit: Should note that both Canadian and Mexican variants are N900W8.
Edit 2: I flashed my sisters Note 3 with this method. Re-partition unchecked, worked perfectly. It was running stock 4.3.
Click to expand...
Click to collapse
Should this work with the tmobile n900t if I use the latest tmobile modem and csc with the methods outlined in your post?

mocsab said:
this is probably more wishful thinking than any real hope of it having happened yet - but I have to join the hordes to ask the one question - has anyone flashed on TMOBILE Sucessfully yet? (Intellectually I am sure I know the answer - but I feel compelled to ask the question just the same)..
Click to expand...
Click to collapse
I am in the process now of flashing it on tmo....hold tight.

TheAxman said:
I am in the process now of flashing it on tmo....hold tight.
Click to expand...
Click to collapse
Cant wait to hear that
Sent from my SM-N900T using Tapatalk

TheAxman said:
I am in the process now of flashing it on tmo....hold tight.
Click to expand...
Click to collapse
Remember to use a CSC from a TMO Odin rom and GL.
-Sent from my TMO Samsung Galaxy Note 3 using Tapatalk

RMXO said:
Remember to use a CSC from a TMO Odin rom and GL.
-Sent from my TMO Samsung Galaxy Note 3 using Tapatalk
Click to expand...
Click to collapse
Here's the T-Mobile CSC and T-Mobile Modem

Good luck!
@TheAxman PM me if you are having issues and want to bounce ideas back and forth

TheAxman said:
I am in the process now of flashing it on tmo....hold tight.
Click to expand...
Click to collapse
thump thump - thump thump - thump thump..thump tump thmp thm thmpthmpthmp..
be still my beating heart..... lol - can't wait to hear what happens - fingers crossed...

Oogar said:
Good luck!
Click to expand...
Click to collapse
I'm downloading the files. I found the tmobile modem in bin format, will that suffice or will I need to find the tar?
Anyone have a link?

toyanucci said:
I'm downloading the files. I found the tmobile modem in bin format, will that suffice or will I need to find the tar?
Anyone have a link?
Click to expand...
Click to collapse
Apparently you can flash a modem.bin with Odin...give it a quick google.
I didn't know this and used Cygwin64 Terminal to convert it to a .tar
EDIT: Here is the T-Mobile Modem as a .tar.
https://www.mediafire.com/?xlhlrd09l9pl0k3

TheAxman said:
I am in the process now of flashing it on tmo....hold tight.
Click to expand...
Click to collapse
So how did it go? If t-mobile can do it than AT&T user like me has a chance lol..

Walter.White said:
So how did it go? If t-mobile can do it than AT&T user like me has a chance lol..
Click to expand...
Click to collapse
It didn't boot up.. Lol
Sent from my Nexus 5 using Tapatalk

How to restore stock and unlock

So I have an S3 LTE from fido, currently running clockwork and Cm11.
I want to restore it to stock rom so I can unlock via purchasing a code from unlock.canadagsm.ca (does this site work? another site I should use?)
I have the fideo i747MVLUEMK5 image from the forums downloaded, do I flash it, how do I flash? do I flash it via odin?
thanks for any help you can give

Oh an its the 4.3 bootloader, since I got this phone in January.

SpacePotato said:
Oh an its the 4.3 bootloader, since I got this phone in January.
Click to expand...
Click to collapse
Only flash with Odin if it's a *.tar file. If it's a zip file, then save to your internal SD card and flash via (custom) recovery.

Larry2999 said:
Only flash with Odin if it's a *.tar file. If it's a zip file, then save to your internal SD card and flash via (custom) recovery.
Click to expand...
Click to collapse
its a tar.md5 file, which option in odin do I use to flash it?
also will it restore default bootloader and remove clockwork?

SpacePotato said:
its a tar.md5 file, which option in odin do I use to flash it?
also will it restore default bootloader and remove clockwork?
Click to expand...
Click to collapse
If you are using Odin v3.09, load the file in the AP box. For other versions, use the PDA box. Do not check or uncheck any boxes other than the defaults. Yes, flashing the file will restore your phone to near factory settings and flash all partitions including bootloader, system, modem and recovery. This means you will have stock, rather than custom, recovery at the end. You can, however, always reflash custom recovery if that's your preference.

Larry2999 said:
If you are using Odin v3.09, load the file in the AP box. For other versions, use the PDA box. Do not check or uncheck any boxes other than the defaults. Yes, flashing the file will restore your phone to near factory settings and flash all partitions including bootloader, system, modem and recovery. This means you will have stock, rather than custom, recovery at the end. You can, however, always reflash custom recovery if that's your preference.
Click to expand...
Click to collapse
aight thanks. Also unlock.canadagsm.ca is it a good site to get unlock codes?

SpacePotato said:
aight thanks. Also unlock.canadagsm.ca is it a good site to get unlock codes?
Click to expand...
Click to collapse
Never used them before, I'm afraid. I just checked their website, however, and at $19, seems reasonable enough. You can, however, limit your risks by ensuring you only use a relatively safe payment option (e.g. PayPal).

Larry2999 said:
Never used them before, I'm afraid. I just checked their website, however, and at $19, seems reasonable enough. You can, however, limit your risks by ensuring you only use a relatively safe payment option (e.g. PayPal).
Click to expand...
Click to collapse
aight, thanks so much!

[q] help major porblem my phone wont boot

okay so i was trying to install bootloader through twrp , it failed (tried clearing dalvik and cache but it still failed) so i gave up on it and pressed reboot, once that happened, the device name appeared for a split second then dissapeared then appeared then dissapeared (keeps appearing and dissapearing) I CANT ACCCESS TWRP MENU , OR BOOT ONLY DOWNLOAD MODE, WHAT DO I DO D:

OmarKnows said:
okay so i was trying to install bootloader through twrp , it failed (tried clearing dalvik and cache but it still failed) so i gave up on it and pressed reboot, once that happened, the device name appeared for a split second then dissapeared then appeared then dissapeared (keeps appearing and dissapearing) I CANT ACCCESS TWRP MENU , OR BOOT ONLY DOWNLOAD MODE, WHAT DO I DO D:
Click to expand...
Click to collapse
Generally speaking: Install bootloader only with Odin.
You should now flash firmware using Odin to save your device. Maybe Kies could restore also.

Androidwizzard said:
Generally speaking: Install bootloader only with Odin.
You should now flash firmware using Odin to save your device. Maybe Kies could restore also.
Click to expand...
Click to collapse
how exactly do i do that? can you provide any links?

OmarKnows said:
how exactly do i do that? can you provide any links?
Click to expand...
Click to collapse
HERE you may find firmware for your country/device, download.
Start Odin, connect your phone in download mode to pc, see if Odin shows up com-port and flash firmware in tab PDA/AP.
There are several guides on youtube/google

Cant Find my carrier
my carrier is international, only countries are on that list, I dont know which one to choose, also if im gonna flash firmware is it possible to flash 4.1.2? or 4.2.2/4.3?

OmarKnows said:
my carrier is international, only countries are on that list, I dont know which one to choose, also if im gonna flash firmware is it possible to flash 4.1.2? or 4.2.2/4.3?
Click to expand...
Click to collapse
Depends on your last firmware. What was the bootloader version? If above MJ5, you can't downgrade so you are free to flash eg latest 4.4.2

Androidwizzard said:
Depends on your last firmware. What was the bootloader version? If above MJ5, you can't downgrade so you are free to flash eg latest 4.4.2
Click to expand...
Click to collapse
I have no idea what bootloader i have

OmarKnows said:
I have no idea what bootloader i have
Click to expand...
Click to collapse
Great, and which one didya try to flash through TWRP?

Androidwizzard said:
Great, and which one didya try to flash through TWRP?
Click to expand...
Click to collapse
The MJ5 bootloader, i found one that said it would be flashable through a recovery menu

OmarKnows said:
The MJ5 bootloader, i found one that said it would be flashable through a recovery menu
Click to expand...
Click to collapse
1. Never flash bootloader through recovery
2. I assume that you have had newer bootloader than MJ5 before flash, so you soft bricked your device
3. To regain full funtional device follow post #4

Androidwizzard said:
1. Never flash bootloader through recovery
2. I assume that you have had newer bootloader than MJ5 before flash, so you soft bricked your device
3. To regain full funtional device follow post #4
Click to expand...
Click to collapse
im having trouble , check my post here : http://forum.xda-developers.com/gal...m-via-odin-t2868125/post55256421#post55256421

S6e+ G928W8 (Canadian variant) DEODEXED ROOTED AND XPOSED ROM

Hello,
Here is an UPDATE this is a FULL S6e+ Canadian Variant Rom
First of All at this point you know that your phone should be rooted + you need a moded kernel or you will be stuck in a boot-loop ( you will find it in S6e+ international Thread )and this means BYE-BYE WARRANTY
Second do not forget to Backup in TWRP / CWM
The most important is: I'M not responsible if your phone went crazy
Now that you agreed for the 3 Warnings:
Download the ROM in your SD
Reboot in your TWRP / CWM recovery
Flash it
Wipe Cache, Wipe Dalvik/ART Cache
Reboot wait and wait maybe one more time wait (android will finish doing his Job) et Voilà.
What is in this ROM
A FULL ROM WITH ALL THE CSC CANADIAN
Volume is boosted
Native Call Recorder is Enabled
2nd Keyboard Symbol Enabled ( for eng_US and fr_CA )
Rooted
Xposed
Deodexed
As from my Side everything is working well . BUT STILL SO IMPORTANT DO A BACKUP AS WE DON'T HAVE YET A STOCK FIRMWARE.
When you Flash it you will have Rogers CSC . if you want another Canadian Carrier CSC,
once you phone is booted go to the dialer and type *#272*IMEI# its gonna prompt the Canadian CSC select the needed one click on install, the Phone will reboot Reset and install the selected CSC.

I know all the T-Mobile bloatware will be removed but I would like to keep one of them which is the "NAME ID" how could I do that?

negbalakay said:
I know all the T-Mobile bloatware will be removed but I would like to keep one of them which is the "NAME ID" how could I do that?
Click to expand...
Click to collapse
just push it in system/ app/ create folder nameid / and set the permission

With the proper Kernel, would this ROM work for the standard T-Mobile S6 edge? Also does this ROM retain the T-Mobile WiFie Calling?

GodfatherSadri said:
With the proper Kernel, would this ROM work for the standard T-Mobile S6 edge? Also does this ROM retain the T-Mobile WiFie Calling?
Click to expand...
Click to collapse
This is not a Full Rom so u cant flash it as so.
CA variant does not have Wifi call enabled <till now>
Kernels wld work usually b/een Tmobile and Canadian ( i was even surprised when I flashed a full Note5 T-mobile ROM on my s6 edge + just to test how the phone wld act)

When will we US variants get in on the action eh?
Sent from my SM-G928T using Tapatalk

---------- Post added at 05:49 AM ---------- Previous post was at 05:49 AM ----------
[/COLOR]
Shredder96 said:
When will we US variants get in on the action eh?
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
Try going to s6edge plus general section. We have action there.
Sent from my SM-G928T using Tapatalk

Shredder96 said:
When will we US variants get in on the action eh?
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
I dont know. . I did this rom cause we canadian do not have yet a stock firmware.

Can we install TMobile 928T ROM in our 928W8? I really want the Wifi calling feature. What's really the difference between these two models?
Sent from my SM-G928W8 using XDA Free mobile app

Yorgo1982 said:
This is not a Full Rom so u cant flash it as so.
CA variant does not have Wifi call enabled <till now>
Kernels wld work usually b/een Tmobile and Canadian ( i was even surprised when I flashed a full Note5 T-mobile ROM on my s6 edge + just to test how the phone wld act)
Click to expand...
Click to collapse
Do you know where we can download the Canadian version of stock firmware? My phone has turned out to be a brick because of the FRP lock (so stupid that forgot OEM unlock before factory reset the device), seems like I will have to use the stock firmware to make it work again... Or do you have any other suggestions? Only few information about 928W8, so hard to find one on the same boat...

sunyangkobe said:
Do you know where we can download the Canadian version of stock firmware? My phone has turned out to be a brick because of the FRP lock (so stupid that forgot OEM unlock before factory reset the device), seems like I will have to use the stock firmware to make it work again... Or do you have any other suggestions? Only few information about 928W8, so hard to find one on the same boat...
Click to expand...
Click to collapse
I will try to make an odin with a tmobile rom. Will test it and give u news. but let me understand 1rst are you able to boot in recovery mode again ? if yes a stock recovery?

sunyangkobe said:
Do you know where we can download the Canadian version of stock firmware? My phone has turned out to be a brick because of the FRP lock (so stupid that forgot OEM unlock before factory reset the device), seems like I will have to use the stock firmware to make it work again... Or do you have any other suggestions? Only few information about 928W8, so hard to find one on the same boat...
Click to expand...
Click to collapse
You can find it most likely at http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841 :good:

mmyers0876 said:
You can find it most likely at http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841 :good:
Click to expand...
Click to collapse
\
thanks but your link is for the G925W8 and not the G928W8 and in canada we dont have a stock rom yet

Yorgo1982 said:
I will try to make an odin with a tmobile rom. Will test it and give u news. but let me understand 1rst are you able to boot in recovery mode again ? if yes a stock recovery?
Click to expand...
Click to collapse
Thanks for the reply. I am in the situation exactly like here: http://forum.xda-developers.com/sprint-galaxy-s6/help/custom-binary-blocked-frp-lock-t3152054
Tried to flash TWRP using ODIN, but got the same error "custom binary blocked by FRP lock". Only download mode is available, in other words, only ODIN can help now.
Lots of discussions in the above link, but seems that the only working solution is to flash the stock firmware, which doesn't exist for 928W8 in Canada....

sunyangkobe said:
Thanks for the reply. I am in the situation exactly like here: http://forum.xda-developers.com/sprint-galaxy-s6/help/custom-binary-blocked-frp-lock-t3152054
Tried to flash TWRP using ODIN, but got the same error "custom binary blocked by FRP lock". Only download mode is available, in other words, only ODIN can help now.
Lots of discussions in the above link, but seems that the only working solution is to flash the stock firmware, which doesn't exist for 928W8 in Canada....
Click to expand...
Click to collapse
Are u rooted?
I created an odin and flashed it and it worked. With a moded boot. Twrp and a system.img sm-g928f as soon as u r in u can flash my cust rom with twrp to go back to g928w8. But it will trip ur knox.

Yorgo1982 said:
Are u rooted?
I created an odin and flashed it and it worked. With a moded boot. Twrp and a system.img sm-g928f as soon as u r in u can flash my cust rom with twrp to go back to g928w8. But it will trip ur knox.
Click to expand...
Click to collapse
Yes, it is rooted. But the FRP lock stops me odin flashing the tmobile stock firmware, which I guess is still different from 928w8's stock firmware.... Odin always shows failed.....

sunyangkobe said:
Yes, it is rooted. But the FRP lock stops me odin flashing the tmobile stock firmware, which I guess is still different from 928w8's stock firmware.... Odin always shows failed.....
Click to expand...
Click to collapse
Stock tmobile wont work.
And even moded system tmobile fails . I will send u the odin that i did. It will need 6min to finish uploading

Yorgo1982 said:
Stock tmobile wont work.
And even moded system tmobile fails . I will send u the odin that i did. It will need 6min to finish uploading
Click to expand...
Click to collapse
Sure, thanks a lot! I will wait for it and hope you can save my phone....

sunyangkobe said:
Sure, thanks a lot! I will wait for it and hope you can save my phone....
Click to expand...
Click to collapse
Voila https://www.dropbox.com/s/pntnqaxi0an79k1/CREATED-TAR-201509210757.tar?dl=0
Again this is based on international system. With TWRP note 5

Yorgo1982 said:
Voila https://www.dropbox.com/s/pntnqaxi0an79k1/CREATED-TAR-201509210757.tar?dl=0
Again this is based on international system. With TWRP note 5
Click to expand...
Click to collapse
Awesome, really appreciated! I will download and try this one and will let u know if it fixes my problem.
---------- Post added at 03:48 AM ---------- Previous post was at 03:13 AM ----------
Yorgo1982 said:
Voila https://www.dropbox.com/s/pntnqaxi0an79k1/CREATED-TAR-201509210757.tar?dl=0
Again this is based on international system. With TWRP note 5
Click to expand...
Click to collapse
hmm... still with no luck...
Same error..... When I tried to odin the new ROM, the error shows up again "Custom Binary(Boot) Blocked By FRP Lock"....

Stock TW Firmware/Bootloader/Modem N910TUVU2DOK2 [UNMODIFIED][Mirror]

Mirror Link to N910TUVU2DOK2_N910TTMB2DOK2_TMB [FULL STOCK ROM]
Also: BOOTLOADER & MODEM
---Downloads---
Full Untouched ROM from Sammobile
Mega: https://mega.nz/#!asRzgCYb!f8ssb_v6zDxYJ8_u1ygzpothj1arjRmMdM_opGz8QO0
Bootloader file:
Android File Host: https://www.androidfilehost.com/?fid=24269982087008410
Mega: https://mega.nz/#!atYXVJQI!KSMHRMcH4qPgoP7sxSWM0ihNMOU-eQwYISaimam5tdk
Modem file:
Android File Host: https://www.androidfilehost.com/?fid=24269982087008409
Mega: https://mega.nz/#!vlQ2VILY!NFCASlvP7Rf5kB3d2eN2sy3MC_3SLmQ945dRKB1nfzU
User: @eduardog131 provided links just to the modem and bootloader in a later post in this thread. I am simply providing the link in the OP Thanks!

OK so do we use odin

Thanks. Will we be able to root and custom recovery?

lilila said:
Thanks. Will we be able to root and custom recovery?
Click to expand...
Click to collapse
You should be able to ODIN flash TWRP then you will need to flash a custom kernel to get root, and flash Superuser.
I have not tried it yet though, so I have not verified if it works or not.

I tried flash clean rom via odin, fully bootup, reboot to download, installed TWRP recovery, then flashed superuser.zip. Bootloop.
There was this other article on the net about the 910C saying they got 5.1.1 but you have to flash back your booloader to 5.0.1.

Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.

poontab said:
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
Click to expand...
Click to collapse
Did it work?

poontab said:
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
Click to expand...
Click to collapse
Do you have a link for beastmode?

Rollablunt420 said:
Did it work?
Click to expand...
Click to collapse
Dunno. Left laptop at work but should since it's not enforcing. I'll know in a few hours.
sdaelr said:
Do you have a link for beastmode?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3238775
Alternatively AEL or other non enforcing 5.1.1 compatible kernel are needed for Samsung lollipop 5.1 or greater with root.

poontab said:
Odin new firmware, Odin twrp, in twrp flash freeza's beastmode 1.1 for n910T/3, flash supersu. report.
Click to expand...
Click to collapse
Yes, it works for me.
来自我的 SM-N910T 上的 Tapatalk

Ripped the BL/CP parts straight from the firmware.
Since I assume none of you want to exactly download a 1.84GB file for just a bootloader and modem upgrade (why would you go back to stock), here are the BL/CP parts!
-
[Update: 13-1-16: PIT file now available to recover from a bad brick]
[DO NOT USE UNLESS YOU NEED TO REPARTITION YOUR PARTITION TABLE, OR YOU'RE IN A BAD BRICK.]
https://www.androidfilehost.com/?fid=24369303960684492
INSTALLING THESE FILES
1. Load phone in download mode. (Vol down+Home+Power)
2. Open ODIN3 on your computer. (Make sure the Samsung drivers are installed.)
3. Load the booloader file in BL.
3a. Load the modem file in CP.
4. Hit the start button, and let the files flash.
5. If there are no error messages in the log portion of ODIN3, then you have successfully flashed and upgraded to the 5.1.1 bootloader.
NOTE: At this time, you CANNOT downgrade from the 5.1.1 bootloader, so take caution.
---Downloads:
Bootloader file:https://www.androidfilehost.com/?fid=24269982087008410
Modem file:https://www.androidfilehost.com/?fid=24269982087008409

eduardog131 said:
Ripped the BL/CP parts straight from the firmware.
Since I assume none of you want to exactly download a 1.84GB file for just a bootloader and modem upgrade (why would you go back to stock), here are the BL/CP parts!
-
INSTALLING THESE FILES
1. Load phone in download mode. (Vol down+Home+Power)
2. Open ODIN3 on your computer. (Make sure the Samsung drivers are installed.)
3. Load the booloader file in BL.
3a. Load the modem file in CP.
4. Hit the start button, and let the files flash.
5. If there are no error messages in the log portion of ODIN3, then you have successfully flashed and upgraded to the 5.1.1 bootloader.
NOTE: At this time, it is unknown if you can downgrade from the 5.1.1 bootloader, so take caution.
---Downloads:
Bootloader file:https://www.androidfilehost.com/?fid=24269982087008410
Modem file:https://www.androidfilehost.com/?fid=24269982087008409
Click to expand...
Click to collapse
Pretty cool... Can you please do the same for the T3 version?

domhall said:
Pretty cool... Can you please do the same for the T3 version?
Click to expand...
Click to collapse
Sure, when I get time at home. (That is, unless someone beats me.)

~~

Razgriz said:
DOK2 is for both versions of the TMo Note 4.
Click to expand...
Click to collapse
T3 isn't interchangeable with T firmware.

I'm gonna go on the limb here, I'm 50% certain you can't go back to COG2... Be very cautious... When I Odin'ed DOK2 the process seemed odd not sure why lol

Will say modem on DOK2 seems way more stable, I don't seem to have as many data drops, and me personally I could give two s**ts if I can go back to cog2..doesnt matter as you can still flash those roms, I'm on a DOK2 Bootloader and modem with a cog2 rom right now...by the way thanks for the bootloader and modem files man..lol..really didnt wanna go back to stock
Sent from my SM-N920T using xda app-developers app

manufan721 said:
Will say modem on DOK2 seems way more stable, I don't seem to have as many data drops, and me personally I could give two s**ts if I can go back to cog2..doesnt matter as you can still flash those roms, I'm on a DOK2 Bootloader and modem with a cog2 rom right now...by the way thanks for the bootloader and modem files man..lol..really didnt wanna go back to stock
Click to expand...
Click to collapse
Yeah, pretty much agree here. This new modem has given me a lot less data drops. I had really spotty HSPA, with it dropping so constantly. Tested it out during school today and it hasn't dropped.
-------
N910T3 BL+CP parts ripped! I also managed to acquire a PIT file for the T3...DO NOT LOAD THE PIT FILE INTO ODIN3! I HAVE IT IN CASE SOMEONE WHO HAS A SEVERE BRICK CAN USE IT!
Same instructions as before for flashing the BL+CP parts. Reference a few posts up.
Bootloader file:https://www.androidfilehost.com/?fid=24269982087009029
Modem file:https://www.androidfilehost.com/?fid=24269982087009028
PIT FILE (YOU HAVE BEEN WARNED! DO NOT LOAD UNLESS THERE IS A SEVERE BRICK.)https://www.androidfilehost.com/?fid=24269982087009027

Confirm once you load DKO2 BL you can't go back to COG2 BL

ALLDAT said:
Confirm once you load DKO2 BL you can't go back to COG2 BL
Click to expand...
Click to collapse
Lawdy.. lol how many threads have you asked this in. I answered this in another thread.