Hi
My touch screen is not responding with cm 12 based rom. I tried cm 12 and cyanHacker rom. In both the cases the screen was not responding after the rom boots up.
I initially had cm 11 installed with cwm recovery. The steps i did to install the roms were,
1. Flash the boot image using fastboot into boot partition. (fastboot flash boot boot.img)
2.Then after going into recovery mode installed the zip and gapps and restarted.
3. When the rom boots for the first time, at the the language selection page, the screen was non responsive.
But i did notice that hardware buttons (power, volume + and volume - ) are fine. Also the screen auto rotate is working fine.
I am unable to find why this is happening and what went wrong. Can someone please help me with me with correct way to do it and get it installed.
My is Z!C 2011 model, just an info
Thanks
Related
I am currently running Domination CM10 build 6 and was previously using the kernel that came with the rom.
Just updated to latest bricked which first just wouldnt boot (flashed kernel via fastboot and zip via recovery as normal) either normally or load recovery so used viper flasher to do kernel and modules (replaced ones it came with to latest ones from the kernel zip)
Now phone boots fine but after a few seconds it comes up "Failed to Load! " in a box at bottom (similar to boxes when something is given root access, checked and phone still rooted and that side working fine) but the box never seems to fade away so stays stuck over top of everything.
I only have 2 widgets... clock & calendar both of which load up fine, boots into recovery now if I boot normal and then use rom "reboot into recovery" but whenever I try to use it the phone just reboots, if I hold volume down when powering on it just boots as normal and dont load hboot
Any ideas? Know its not major issues and can probably be fixed with a wipe but tbh was lazy and didnt backup before flashing kernel thinking I wouldnt need it so hoping someones had similar and knows a simpler fix which wont involve wiping
ViaraiX said:
I am currently running Domination CM10 build 6 and was previously using the kernel that came with the rom.
Just updated to latest bricked which first just wouldnt boot (flashed kernel via fastboot and zip via recovery as normal) either normally or load recovery so used viper flasher to do kernel and modules (replaced ones it came with to latest ones from the kernel zip)
Now phone boots fine but after a few seconds it comes up "Failed to Load! " in a box at bottom (similar to boxes when something is given root access, checked and phone still rooted and that side working fine) but the box never seems to fade away so stays stuck over top of everything.
I only have 2 widgets... clock & calendar both of which load up fine, boots into recovery now if I boot normal and then use rom "reboot into recovery" but whenever I try to use it the phone just reboots, if I hold volume down when powering on it just boots as normal and dont load hboot
Any ideas? Know its not major issues and can probably be fixed with a wipe but tbh was lazy and didnt backup before flashing kernel thinking I wouldnt need it so hoping someones had similar and knows a simpler fix which wont involve wiping
Click to expand...
Click to collapse
try to reflash stock kernel, maybe it will be ok again, in worst case you'll have to wipe
SM-T900 Pro 12.2 boots only to a backlit black screen. If I attempt to boot to recovery (vol down + home + power), I can boot to TWRP, but not to an OS.
This device had been rooted before. I was trying to install LineageOS 14.1. In my mind, I followed these instructions perfectly.
https://forum.xda-developers.com/ga...-7-1-xsm-t900-unofficial-cyanogenmod-t3524853
I've rooted and installed quite a few ROMs on quite a few devices, but I'm stumped.
Works:
Can boot to download (and can use Odin (v.3.10)
Can boot into TWRP recovery
Can always reboot with vol down + home + power
Doesn't work:
Can't boot normally - a reboot takes me to a backlit black screen.
Can't boot to the OS (not from recovery either)
How strange, mine has just started doing the same thing, I thought I needed a new battery but no.
I have a SMT-520
Like you I can boot into TWRP and the android recovery mode but that's it when I try to boot to android it just sits on a black screen nothing more,
I can connect with Odin, I've tried re-flashing new rom and the original rom back on to the device but still not working please any info will be great
thanks
wolf
Mine did the same thing but I left it on the black screen and after a couple minutes it rebooted and went black for a while and then finally booted into 14.1 rom
LG G3 D855
aoscp 5.1 Funnelcake
3GB/32GB
Android 8.1
No Root
No Custom Kernel
I had TWRP installed for about 2 years
But now when I try to enter it then it says "Boot Verification Failed" and then Blue and Red light flashes constantly until I pull out the battery. I even flashed MR_Bump on every ROM Flash.
Fact is,
The system boots up fine.
In rare cases the system boots up till the Launcher's home screen and then automatically reboots into download mode, but it can be easily fixed by a battery pullout.
My real problem is how to install TWRP once again because I want to install a new ROM because this one's malfunctioning.
Any help would be appreciated
--- I am stuck in the boot animation logo screen with both Lineage OS 8 and the stock Samsung ROM ---
I have a Samsung Galaxy Tab S (SM-T800). I've installed TWRP and Lineage OS 7.1.2 on it a while ago. However, I was never able to boot into TWRP after that - pressing the Power key, the Volume up key and the Home key always got me to the "Downloading..." screen instead.
Recently, my Lineage OS ROM kept resetting unexpectedly, so:
- I did a factory reset, trying to solve the problem. It didn't, but I noticed that on first reboot after the factory reset, I got to the TWRP Recovery screen.
- I decided to install a new custom ROM. I downloaded Lineage OS 8 and did another factory reset from my existing Lineage OS 7.1.2.
- When I got to the TWRP Recovery screen, I chose "Install" this time and installed Lineage OS 8 (without doing a clean first...)
- On first boot after install, it got stuck into the Lineage OS boot animation logo.
- I had to reset it using the Power key, the Volume up key and the Home key - this got me into the "Downloading..." screen
- I used Odin to flash the stock SM-T800 ROM I got from sammobile.com (T800XXU1CRJ1_T800OXX1CRJ1_ROM.zip)
- ROM was successfully flashed, but it got stuck again - this time in the stock ROM boot animation logo on first reboot.
So now:
- I am stuck in boot animation logo with both Lineage OS 8 and the stock Samsung ROM
- My tablet is visible in Odin (so I could maybe flash smth else?)
- I can only reboot in Download Mode
- I have adb and fastboot on my PC, but I don't know how to make my tablet visible to these tools in the current situation
Is there any way I can recover from this?
Did you end up finding a solution? I am having a similar issue with my T700. Trying the stock rom now
Yes, managed to boot into recovery mode (Home + Volume Up + Power button). From there, I went through format partition and reset dalvik, then reset - the tablet finally booted after that.
Hi to all, I just want to ask for some advice or tips. The thing is:
I have one old Redmi 5A Riva. It was lying in the drawer some time, so I decided to try to unlock the bootloader and flash some custom ROM.
So, I unlocked the bootloader - OK
Then I flashed TWRP - OK
Then I decided to make root on stock firmware - OK
Then I tried to flash Lineage OS 17 - after flash it stopped booting.
So I tried to flash Lineage OS 18 - it started booting again but I found out that phone doesn´t detect an USB cable, so I wanted to flash some other ROM instead.
But after few moments TWRP suddenly disappeared (volume up + power on stopped working, only vol. down and power on worked to fastboot) - kinda weird, I said to myself Now I am f**ked up because Lineage 18 was not rooted, I wanted to do it later, so I couldn´t use TWRP app to reflash it.
But after few moments there appeared stock recovery menu, so I thought okay, maybe its not dead, so I try to flash just stock rom. I tried MIUI 10, but again - not booting.
So I did wipe again and tried MIUI 9 - flashing via fastboot and used flash_all.bat attached to rom - it booted up and worked, so I enabled USB debugging again and tried OMNI ROM. I flashed it, after flash it boots up, but after few second screen goes black and nothing else happens.
I am kinda annoyed with this , I flashed many phones, but only Xiaomi makes these weird problems.
Can someone help me to fix this?