Hi guys i need help installing lollipop, i have downloaded update the file and when click on install update in notifactions bar the phone boots into recovery teamwin recovery, what do i do then. and my phone is rooted with htc standard rom and S is on. I have phone data backed-up.
do i need to wipe device before i install zip file in downloads folder.
Related
CWM is no more there after installing a new rom and new rom won't load. Then i have to flash the stock rom again > root it > install CWM. Again when i install any rom it would install normally but nothing gives a blank screen after reboot and the stock rom is not even there.
The situation is occurring with the following;
Phone: Sony Xperia ARC S (LT18i)
Bootloader: unlocked
Android version 2.3.4 (Build 4.0.2.A.42) -
I have made multiple attempts on installing new roms but nothing works. Every time i reboot after installation im left with a blank screen. Can anyone advise what the problem could be ?
Thanks
Did u flash the kernel for the ROM u flashed ? The ROM will not boot without its kernel.
Sent from my Xperia Arc S using Tapatalk 2
mtpocketz said:
CWM is no more there after installing a new rom and new rom won't load. Then i have to flash the stock rom again > root it > install CWM. Again when i install any rom it would install normally but nothing gives a blank screen after reboot and the stock rom is not even there.
The situation is occurring with the following;
Phone: Sony Xperia ARC S (LT18i)
Bootloader: unlocked
Android version 2.3.4 (Build 4.0.2.A.42) -
I have made multiple attempts on installing new roms but nothing works. Every time i reboot after installation im left with a blank screen. Can anyone advise what the problem could be ?
Thanks
Click to expand...
Click to collapse
you must be installing CWM into the system through one touch command prompt program.. as such as soon as the ROM changes and you wipe out data and cache, CWM disappears..try flashing a custom recovery kernel which are available even for stock roms.
Also follow these steps for a custom ROM (eg CM9):
download the ROM, extracted it into a folder, copy the boot.img where you can remember, then copy the original cm9 ZIP - not the extracted folder- into the root of SD..use fastboot mode of flashtools to flash the kernel boot.img which you had copied..its a recovery kernel so CWM should open..wipe out SD data..then cache..and then go into advanced option and clear dalvik..and then proceed to install zip from sd..then gapps.zip if u want..it should install fine..and then reboot.
Press Thanks if you think i was of help to you..:good:
Thanks
iwarind said:
you must be installing CWM into the system through one touch command prompt program.. as such as soon as the ROM changes and you wipe out data and cache, CWM disappears..try flashing a custom recovery kernel which are available even for stock roms.
Also follow these steps for a custom ROM (eg CM9):
download the ROM, extracted it into a folder, copy the boot.img where you can remember, then copy the original cm9 ZIP - not the extracted folder- into the root of SD..use fastboot mode of flashtools to flash the kernel boot.img which you had copied..its a recovery kernel so CWM should open..wipe out SD data..then cache..and then go into advanced option and clear dalvik..and then proceed to install zip from sd..then gapps.zip if u want..it should install fine..and then reboot.
Press Thanks if you think i was of help to you..:good:
Click to expand...
Click to collapse
Got it - Yes i was installing CWM within stock rom via market. though i tried to install it through adb/windows but still i guess the problem was all about not installing a custom recovery kernel.
Thanks a lot !
Installation aborted error status 7 xperia mini
I succesfully rooted my xperia mini and installed cyanogenmod 9 rc2 (smultron). The device was running fine with no problems then i did a huge mistake i entered in the cwm recovery and i formatted cache data syatem and all that listed there.then i reboot device it stuck on free xperia project logo.then i tried to install rom via cwm i started to give error installation aborted status 7 error. Please help no backup of official rom.
aditya naik said:
I succesfully rooted my xperia mini and installed cyanogenmod 9 rc2 (smultron). The device was running fine with no problems then i did a huge mistake i entered in the cwm recovery and i formatted cache data syatem and all that listed there.then i reboot device it stuck on free xperia project logo.then i tried to install rom via cwm i started to give error installation aborted status 7 error. Please help no backup of official rom.
Click to expand...
Click to collapse
Download stock ROM and install it via Flashtool.
My signature, there is link to download stock ROMs. Search for proper one and install it.
Hi in my micromax a1 I've installed custom recovery twrp. So after that when I get the new lollypop 5.1.1 system update notification and download it then after the phone restarts it opens in recovery mode and opens the twrp. I've also try to flash the update.zip from my internal memory path but its not flashing and showing some error message. So I've decided to go back in stock recovery. For that I went for the recovery in my stock kitkat rom in sp flash tools. But when I connect my phone it is not detecting with or without battery. What should I do now? pls help...
itsovi said:
Hi in my micromax a1 I've installed custom recovery twrp. So after that when I get the new lollypop 5.1.1 system update notification and download it then after the phone restarts it opens in recovery mode and opens the twrp. I've also try to flash the update.zip from my internal memory path but its not flashing and showing some error message. So I've decided to go back in stock recovery. For that I went for the recovery in my stock kitkat rom in sp flash tools. But when I connect my phone it is not detecting with or without battery. What should I do now? pls help...
Click to expand...
Click to collapse
Did you find any solution to this? Cuz I'm having the same problem
Hi guys, this morning I decided to root ny tablet. I flashed CWM custom recovery and then installed universal android root zip file through the recovery. My goal was to unlock the full potential of Lucky Patcher by having unlocked Root permissions. I succeeded in installing the zip file, and everything was perfect. Unfortunately after custom patching Google play with LP, it kept crashing on startup. So (my bad) I decided to revert to factory settings. By doing this I'm now stuck in this never ending bootloop. I tried reinstalling .zip file through the use of ADB sideload, but when I exit that menu to reboot the device after having installed the .zip the device boots in CWM recovery mode. I really need your help as I'M very new to these type of things. Thand you
Back to stock ROM and start all over again
hello everyone, hope you all have a nice day...
i'm no on NON-ROOTED stock OxygenOS 3.5.2, yesterday OTA update to 3.5.3 appeared on my phone and i downloaded it, i have TWRP recovery, then in rebooted to TWRP to install the update, after thtat, phone reboots again and said Update failed, if i go to system update now,it wants to download a 1.3GB file instead of former 80mb file! can i update using the 80mb OTA file instead of downloading a 1.3gb file ?
OTA wont work with TWRP Recovery. You need to revert back to stock recovery to use OTA.
And If you use full ROM ZIP, it will break your TWRP recovery.
ansaziz777 said:
OTA wont work with TWRP Recovery. You need to revert back to stock recovery to use OTA.
And If you use full ROM ZIP, it will break your TWRP recovery.
Click to expand...
Click to collapse
It worked for me with TWRP. But I did something different. If you turn on "show hidden files" in any supported File Manager you'd notice a folder named ".OnePLusH2Ota" that's where the downloaded update files are stored as a zip. So all you have to do is download the update file and Move it to the Root directory from the update folder. Then boot into TWRP and flash the zip and it will work.. Hope that helped
**REMEMBER THE TWRP I USED WAS NOT THE OFFICIAL TWRP. IT WAS A CUSTOM VERSION OF TWRP**
ansaziz777 said:
OTA wont work with TWRP Recovery. You need to revert back to stock recovery to use OTA.
And If you use full ROM ZIP, it will break your TWRP recovery.
Click to expand...
Click to collapse
I was able to download and then flash the update .zip with the modified TWRP, didn't break that version of TWRP.
Hi All,
Previously my op3 unlocked and rooted after some days i was flashed Freedom OS 1.7 (normal) build. Now i want go back to complete stock and unroot. I follow some of the guidance videos internet and followed ,
1. Restored my backup via twrp
2. Flashed Full rom OOS 3.2.6 via TWRP
3. Flashed stock recovery via ADB. Everything works fine but
Now i am trying to update 3.2.6 to 3.2.7 getting error " Installation Failed" . Whats wrong i did .
Also i have boot logo Freedom OS don't know even i am on stock rom. Can any one help me
1. How to remove that boot logo
2. Completely go back to stock rom with stock recovery
3. Also get updates and install without fail
Please help Guys.
Thanks in Advance
Mahesh
Well, probably its a problem with your boot.img partition. Extract boot.img from stock rom zip, then flash it via fastboot flash boot boot.img and then, flash orginal recovery same as boot. Then, finally, flash via recovery STOCK ROM. Probably now it will be fine.
If not, try flash TWRP and make FULL WIPE included system partition and repeat upper steps.
Cheers.
In twrp goto wipe and do normal wipe remember don't do advance wipe otherwise it'll format internal storage as well so avoid advance wipe only do normal wipe then install full 3.2.7 zip and super su. zip
Sent from my ONEPLUS A3003 using Tapatalk
Mahesh8348 said:
Hi All,
Previously my op3 unlocked and rooted after some days i was flashed Freedom OS 1.7 (normal) build. Now i want go back to complete stock and unroot. I follow some of the guidance videos internet and followed ,
1. Restored my backup via twrp
2. Flashed Full rom OOS 3.2.6 via TWRP
3. Flashed stock recovery via ADB. Everything works fine but
Now i am trying to update 3.2.6 to 3.2.7 getting error " Installation Failed" . Whats wrong i did .
Also i have boot logo Freedom OS don't know even i am on stock rom. Can any one help me
1. How to remove that boot logo
2. Completely go back to stock rom with stock recovery
3. Also get updates and install without fail
Please help Guys.
Thanks in Advance
Mahesh
Click to expand...
Click to collapse
before you flash 3.2.7 mount system read-only. you can do this under "mount"
it is a known bug with twrp and oxygenos
You can download the stock boot logo from here: https://www.androidfilehost.com/?fid=529152257862664522
Credits goes to @jamal2367
panther124 said:
before you flash 3.2.7 mount system read-only. you can do this under "mount"
You can download the stock boot logo from here: https://www.androidfilehost.com/?fid=529152257862664522
Credits goes to @jamal2367
Click to expand...
Click to collapse
Hi you are saying in TWRP or Stock recovery? anyway i am on stock recovery . How to mount on stock recovery.
Mahesh8348 said:
Hi you are saying in TWRP or Stock recovery? anyway i am on stock recovery . How to mount on stock recovery.
Click to expand...
Click to collapse
if you are on stock recovery you cant change the mounts.
flash twrp to flash bootlogo and oxygenos 3.2.7
otherwhise you have to install via sideload but this is very slow and you cant flash stock bootlogo
so flash twrp and then mount system read-only and then flash oxygenos 3.2.7 and after or before this you can flash the stock bootlogo
panther124 said:
if you are on stock recovery you cant change the mounts.
flash twrp to flash bootlogo and oxygenos 3.2.7
otherwhise you have to install via sideload but this is very slow and you cant flash stock bootlogo
so flash twrp and then mount system read-only and then flash oxygenos 3.2.7 and after or before this you can flash the stock bootlogo
Click to expand...
Click to collapse
Thanks sir for that boot logo.
I want go complete stock without twrp. after i flash 3.2.6 via twrp it will replace twrp recovery and automatically go to stock recovery. Again i flashed stock recovery . try to update via stock recovery it shows installation failed. attached is the image for your reference. could you please suggest to install updates successfully .
Mahesh8348 said:
Thanks sir for that boot logo.
I want go complete stock without twrp. after i flash 3.2.6 via twrp it will replace twrp recovery and automatically go to stock recovery. Again i flashed stock recovery . try to update via stock recovery it shows installation failed. attached is the image for your reference. could you please suggest to install updates successfully .
Click to expand...
Click to collapse
download 3.2.7 full zip and flash it
i will show you how to get this becuase you cant download it from official site
http://forum.xda-developers.com/oneplus-3/how-to/download-install-oxygenos-3-2-7-update-t3472178
here you can get the full zip. And this zip you can flash without 3.2.6 preinstalled.
panther124 said:
download 3.2.7 full zip and flash it
i will show you how to get this becuase you cant download it from official site
http://forum.xda-developers.com/oneplus-3/how-to/download-install-oxygenos-3-2-7-update-t3472178
here you can get the full zip. And this zip you can flash without 3.2.6 preinstalled.
Click to expand...
Click to collapse
Thanks for that sir,
Every time i got update need to do like this way. or i will get updates automatically .
Mahesh8348 said:
Thanks for that sir,
Every time i got update need to do like this way. or i will get updates automatically .
Click to expand...
Click to collapse
You should get it automatically