Develop Bugs

[GUIDE]Root, install recovery with s ON simplest

Hey Guyzzz,
I m preparing a guide how to root and install cwm.............
You just need brains, the files mentioned in the attachment and a minute......
How to:
Install CWM
1. Unlock bootloader from http://www.htcdev.com...
2. After downloading the recovery file, extract it anywhere, connect your phone(it should be switched off), open recovery.bat.
3. And here you go... CWM is installed
Root it
1. After installin CWM, copy the root.zip file into your sd card.
2. Then power off your phone and press volume down+power button.
3. It will scan for some PG...zip files so see to it that there isnt any such file.
4. Then go to recovery by using volume keys.
5. After going to CWM then choose install from sdcard, then choose zip, then navigate to the zip file and click yes.
6. There you go your phone is rooted..
7. And then update the superuser from Play Store and su binary
Install custom ROM
1. After installin CWM, and root.zip, copy any custom ROM file into your sd card.
2. Then power off your phone and press volume down+power button.
3. It will scan for some PG...zip files so see to it that there isnt any such file.
4. Then go to recovery by using volume keys.
5. After going to CWM go to advance wipe dalvik cache and battery stats and go back and wipe cache and factory data reset.
6. Then choose install from sdcard, then choose zip, then navigate to the zip file and click yes.
6. There you go Custom ROM is installed.
For Video Guide how to install cwm see This
THEN INSTALL ANY CUSTOM ROM YOU LIKE...
HOPE I HELPED YOU:good:

As far as i remember 5.0.2.6 version of CWM had problems with charging while being off ( led would stay orange eventho phone was fully charged ).
5.0.2.8 doesnt have this problem, you can get it here http://forum.xda-developers.com/showthread.php?t=1469928

Yasounet said:
As far as i remember 5.0.2.6 version of CWM had problems with charging while being off ( led would stay orange eventho phone was fully charged ).
5.0.2.8 doesnt have this problem, you can get it here http://forum.xda-developers.com/showthread.php?t=1469928
Click to expand...
Click to collapse
Same with 6.0 ports
Sent from my Baconator Over-9000 or my Gmail phone based off iOS based off Android based off Amazon OS based off BlackBerry OS based off Pacman based off Windows 9

Micromax Stock Rom Recovery by JASPREET

This is a STOCK ROM Backup which any MMX A25 Smarty Holder can use to RECOVER HIS OR HER PHONE FROM WORSE Cases, as i have also passedfrom a stage like this where i flashed Clockwork Mod-hence my a25 HANGED ON BOOT SCREEN(micromax/smarty).. so i decided to add this thread to help all others who arein need of this to recover there phones...!
As u have flashed ur a25 with WRONG ROM OR Clockwork mod which is not DONE PROPERLY THEN TO RECOVER FROM IT and To DO IT BY JUST SITTING AT HOME NOT GIVING TO MMX CUSTOMER CARE ,JUST FOLLOW THESE STEPS...
*
IMPORTANT THING- I AM UPLOADING 'clockworkmod' folder u just copy it to root directory of SD Card,then.....
Steps to Recover:
1.As this is a NANDROID BACKUP to recover-Flash ur phone with Clockwork Mod Recovery (link-http://forum.xda-developers.com/showthread.php?t=2063712).
2.then paste this BACKUP in your SD Card (not in any folder).
3.then boot into CWMR recovery by pressing-Volume Up + Power Only(no need to press home button).
4.Now click on-Wipe Data/Factory Reset , then select Yes, after Process completes click on-Wipe Cache Partition, again select Yes then....
4.then go to Backup and Restore option, then click Restore, then it will show you MY Backup FILE Stock Rom,CLICK ON IT, then many NO options will be there YOU HAVE TO CLICK ON YES.
5.then the restore process will start, u sit back let it do its WORK then CWM recovery will automatically reach its home screen, and u will see that below it is WRITTEN-SUCCESSFULLY RESTORED...
Thats It ,Now Reboot ur Phone n enjoy Installing custom Roms now without any worry as if ur A25 IS BRICKED U CAN RESTORE IT AGAIN TO ITS ORIGINAL STOCK ROM... and wait my NET IS SLOW WILL UPLOAD STOCK ROM SOON.....

[GUIDE] For Root and Install CWM Recovery for Samsung Ace GT-S6802

I'm not a Sammy specialist, but I know how to root and flash a recovery.
I wrote this guide after the post from @loganyu who was really disappointed because there was nowhere the zip file update for the Samsung Galaxy Ace GT S6802 Duos.
In this post you will find how to root and install clockwork mod recovery for Samsung Galaxy Ace Duos GT S6802.
So, here is full solution to root your device. It has one version of CWM which is work. Previous version was not working perfectly.
Your phone screen stuck while rebooting. So you have to forcefully switch off mobile by removing and reinserting battery.
New version allows smooth restart in recovery mode. If you are new in this area and never rooted any android smart phone then read this guide with a lot of attention. So if you're ready, Go ahead for the Root process
APPLY THIS AT YOUR OWN RISK!​​
How to root your Sammy Ace GT-S6802
Click to expand...
Click to collapse
1 - Download this update_for_GT-S6802.zip file. This comes in zip format. Don't extract, just rename it "update" only
2 - Connect your mobile to the PC using USB cable. Samsung mobile USB drivers must be installed. Download it in case you don't have the same.
3 - Now put downloaded root file “update.zip” in your Sdcard’s root directory.
4 - Restart your device in recovery mode. Press Volume Up+Home Key/Menu Key+Power Key together to boot in your recovery.
5 - Select “apply update from sd-card” option.
6 - Navigate to “update.zip” (file which you have put in sd-card in step 3) with the volume key
7 - Select it and press home key.
8 - Root will be installed successfully.
9 - Restart your phone.
10 - If all is OK, you can see a super user icon at your home screen.
11 - Well done, you are root and you can play with your phone
How to install CWM recovery for your Sammy Ace GT-S6802
Click to expand...
Click to collapse
1 - Your mobile must be rooted to install recovery. So first root it.
2 - Now Download CWM Recovery Mode zip package. Don’t extract, just transfer this file in your Sdcard’s root directory by connecting mobile with pc /transfer using Bluetooth.
3 - Restart your device in recovery mode. Press Volume Up+Home Key/MenuKey+Power Key together to boot into recovery. There will be a option menu.
4 - Select “apply update from sd-card” option. A new menu will be option
5 - Browse directory using volume up and down volume key. Find CWM package which you have put from PC.
6 - Select this file and press home button to OK.
7 - Wait till completion. Reboot phone after success message appear.
8 - Done. You have installed CWM recovery successfully :good:
NOTE: If you are still on stock recovery after reboot to recovery, select "update.zip" function to reinstall CWM and normally it works well and definitely
Click to expand...
Click to collapse
Files you need for this process:
- update_for_GT-S6802.zip - MD5 Sum: 24e42f067084d66e05bc0cb4928491c9 - Size: 1.23 MB (1287256 bytes)
- CWM-6802.zip - MD5 Sum: 7f01bf047c18bc72c301b11909144afa - Size: 1.35 MB (1413709 bytes)
- samsung usb drivers - MD5 Sum: 658c485f29bd6e15efa6fd28b03a3a90 - Size: 14.08 MB (14760589 bytes)
Click to expand...
Click to collapse

Just reserved in case

Is this cwm permanent
Sent from my GT-S6802

Preshak said:
Is this cwm permanent
Click to expand...
Click to collapse
What do you mean by permanent ?
In case you will find a another recovery which is compatible with your device, you can change if you want.
I don't understand this question ?
Normally we says that for the root! not for a recovery.
If it's for the root, yes, it's a perm root

Bro m saying that , is this cwm installs internally to system ???
as in mmx devices the cwm installs permanent to system and we dont have load it every time we wanna use this, i mean we dnt have update.zip file everytime..
Sent from my GT-S6802

Preshak said:
Bro m saying that , is this cwm installs internally to system ???
as in mmx devices the cwm installs permanent to system and we dont have load it every time we wanna use this, i mean we dnt have update.zip file everytime..
Click to expand...
Click to collapse
Yes, it's permanent

Not working that update.zip. Recovery says
"
(Status 7)
Installation aborted
"

j0e74 said:
Not working that update.zip. Recovery says
"
(Status 7)
Installation aborted
"
Click to expand...
Click to collapse
Have you compare the md5 sums ?
Try to re-download.

philos64 said:
Have you compare the md5 sums ?
Try to re-download.
Click to expand...
Click to collapse
Not really.
I tried with other source after resetting the fone to its defaults and everything went fine. Just waiting for a serious custom ROM meanwhile.
Thanks for your answer.

After installing CWM, stock recovery sends you to CWM, so I decided to do a backup, then rebooted, but I couldn't get back to CWM again. Is there a different button combination to get to CWM? Or is it there was any problem at installing CWM with the boot stuff in the stock boot.img?

Help Needed Please
philos64 said:
I'm not a Sammy specialist, but I know how to root and flash a recovery.
I wrote this guide after the post from @loganyu who was really disappointed because there was nowhere the zip file update for the Samsung Galaxy Ace GT S6802 Duos.
In this post you will find how to root and install clockwork mod recovery for Samsung Galaxy Ace Duos GT S6802.
So, here is full solution to root your device. It has one version of CWM which is work. Previous version was not working perfectly.
Your phone screen stuck while rebooting. So you have to forcefully switch off mobile by removing and reinserting battery.
New version allows smooth restart in recovery mode. If you are new in this area and never rooted any android smart phone then read this guide with a lot of attention. So if you're ready, Go ahead for the Root process
APPLY THIS AT YOUR OWN RISK!​​
update_for_GT-S6802.zip[/COLOR][/U][/B][/URL] file. This comes in zip format. Don't extract, just rename it "update" only
2 - Connect your mobile to the PC using USB cable. Samsung mobile USB drivers[/URL] must be installed. Download it in case you don't have the same.
3 - Now put downloaded root file “update.zip” in your Sdcard’s root directory.
4 - Restart your device in recovery mode. Press Volume Up+Home Key/Menu Key+Power Key together to boot in your recovery.
5 - Select “apply update from sd-card” option.
6 - Navigate to “update.zip” (file which you have put in sd-card in step 3) with the volume key
7 - Select it and press home key.
8 - Root will be installed successfully.
9 - Restart your phone.
10 - If all is OK, you can see a super user icon at your home screen.
11 - Well done, you are root and you can play with your phone
1 - Your mobile must be rooted to install recovery. So first root it.
2 - Now Download ]CWM Recovery Mode zip[/URL] package. Don’t extract, just transfer this file in your Sdcard’s root directory by connecting mobile with pc /transfer using Bluetooth.
3 - Restart your device in recovery mode. Press Volume Up+Home Key/MenuKey+Power Key together to boot into recovery. There will be a option menu.
4 - Select “apply update from sd-card” option. A new menu will be option
5 - Browse directory using volume up and down volume key. Find CWM package which you have put from PC.
6 - Select this file and press home button to OK.
7 - Wait till completion. Reboot phone after success message appear.
8 - Done. You have installed CWM recovery successfully :good:
Click to expand...
Click to collapse
After applying the update from sd card step it says reboot and when i try n reboot the phones is stuck with message ClockworkMod recovery v5.0.2.6. so i had to remove the batery please help !!!!!!!!!!!

j0e74 said:
After installing CWM, stock recovery sends you to CWM, so I decided to do a backup, then rebooted, but I couldn't get back to CWM again. Is there a different button combination to get to CWM? Or is it there was any problem at installing CWM with the boot stuff in the stock boot.img?
Click to expand...
Click to collapse
Do you use Rom manager ? Try the Free App.
It's a another way to go to CWM recovery

gauravsharma1990 said:
After applying the update from sd card step it says reboot and when i try n reboot the phones is stuck with message ClockworkMod recovery v5.0.2.6. so i had to remove the batery please help !!!!!!!!!!!
Click to expand...
Click to collapse
What is exactly the message ?
As I says I'm not Sammy Expert, but we need to know more. how long did you stay with this message?

philos64 said:
Do you use Rom manager ? Try the Free App.
It's a another way to go to CWM recovery
Click to expand...
Click to collapse
Rom Manager sends me to stock recovery.
CWM never installs.

j0e74 said:
Rom Manager sends me to stock recovery.
CWM never installs.
Click to expand...
Click to collapse
Try to re-install completely, because I think that a bad step was make.
Check all Md5 sums before to install.
I will see from my side, if the process is all good,

also roviya
philos64 said:
Try to re-install completely, because I think that a bad step was make.
Check all Md5 sums before to install.
I will see from my side, if the process is all good,
Click to expand...
Click to collapse
I did. No luck at all.
Everytime I reboot to recovery appears this:
recovery opts
...
-- Copying media files...
Successfully copied media files.
-- Applying Muti-CSC --
multicsc : src /syatem/csc/TPA/system/ .
Click to expand...
Click to collapse
I am sure this means stock recovery rewrites recovery everytime I reboot to recovery. CWM installs, but it seems the phone overwrites stock.
It's the only explanation.

have the same problem, can't do anything.
it seems like there's no way to have a definete version of CWR on s6802....

CWM recovery is not there after reboot.
While installation, CWM is getting installed and open successfully. But after a reboot again switches to default recovery.

do these processes deal with unlocking bootloader?
I m a newbie here, sorry if this is a silly question.

Works amazing, thanks a lot for this guide, mate!
I've rooted and installed CWM today on my friend's S6802 with XXMC1 baseband ver. upon this guide. All went perfectly well.
Even after installing CWM, reboot to recovery mode brought me into stock recovery, but no problem about that- I've choosen again "update zip" function to reinstall CWM and it goes perfectly well.

[Q] ( SOLVED) Please help. Can not flash Superu

Hi everybody,
I'm a newbie.
I tried to root my phone but just can not flash superu.
I flash TWRP ( 2.5.0.0) via ODIN sucessfully with a green Pass . Reboot phone to recovery and Hit System and TWRP asked me to swipe if i want to root my phone. I did and my phone reboot after some action performed by TWRP.
I checked with root check basic and it said Root access is not properly installed on this device. I tried to run TWRP manager apk. It said to run the apk phone need rooted. So I know the phone has not been rooted.
I did the following to see if I can correct the problem.
1)Reboot to TWRP recovery and flash CWM_Root_Superuser_3.1.3_Busybox zip file. No success.
2) flash another zip: su-3.0.5-efgh-signed. No sucess.
3) flash another zip: Update superU-1.51 : No success.
4) Flash ClockworkMod Touch Recovery 6.0.2.8 then try to run Install zip on SD card but CWTR return with an error "can not mount sd card "
Please help so I can root my phone. Thanks.
__________________________
Solution:
I found a SU file that work at this thread : http://forum.xda-developers.com/gal...ginner-trying-to-root-flash-rom-t989-t2832408

Installing blisspop

Is there a step by step procedure for installing twrp and blisspop on my e980? presently running the 20i firmware. Tried Flashify but it fails to install twrp. This phone has root but is carrier unlocked but has never been flashed so I am stumped. Any help appreciated

I had this same issue but with installing a recovery in the first place due to the locked bootloader and I couldn't find fixes.
But some info would be useful
1. What firmware are you on ex : Kitkat 4.4.2 etc - this can be checked in about phone option.
I used GPro recovery then flashed twrp via that using the unofficial cwm it installed file for the recovery at the bottom of this thread :
http://forum.xda-developers.com/optimus-g-pro/general/root-bootloader-unlock-t3203573
Steps that may work
1. Enabled unknown sources in security
2. Installed the GPro apk file
3. Hit flash kitkat recovery for g pro
4. Moved the recovery.IMG file for twrp to /sdcard
5. Booted into recovery using the app
6. Flash the recovery.IMG file
What might work (worked for me)
1. Installed cwm using the above method steps 1-3
2. Get latest twrp.IMG (recovery.IMG)
3. Go into flashify
4. Hit flash recovery image
5. Hit choose a file and use your preferred file browser to navigate to your file
6. Hit flash now.
7. Reboot to recovery or normal reboot.
You can mix these two methods and try them differently as for blisspop
1.Get the .zip file
2.Boot into your recovery
3. Wipe System,cache,dalvik cache, and data.
4. Flash the .zip file.
5. Hit reboot to system
WARNING make a backup and check if the .zip is corrupted before booting into recovery
You can also Google methods for installing ROMs.
Hope I helped.