Related
I successfully (??) flashed my F180k to E975K kdz/
everything seems ok, but I get Invalid sim error, and obviously cannot connect/
I tried to unlock the phone using freegee, running TWRP, with no success. should i run CWM 6.0.3.0?
Any other ideas why the phone is locked or how to unlock it?
thanks,
invalid sim got nothing to do with lock bootloader and recovery and freegee
the phone is permanently locked (!!) help...
Any ideas how to bypass it?
if it was working fine before try the same stock f180 firmware and see if that works, have no idea about sim unlocking on optimus G. search for that.
gilsh4321 said:
Any ideas how to bypass it?
Click to expand...
Click to collapse
you need to flash f180 baseband, 1st check your f180 S or K or L then flash baseband made for your variant
thanks, I will try
sunyakram said:
you need to flash f180 baseband, 1st check your f180 S or K or L then flash baseband made for your variant
Click to expand...
Click to collapse
BTW, I was following your (great) instructions. probably did something wrong while trying to flash the baseband. I will retry.
gilsh4321 said:
BTW, I was following your (great) instructions. probably did something wrong while trying to flash the baseband. I will retry.
Click to expand...
Click to collapse
sorry if i was wrong,but many people including me use the method and have no worry,the problem only came when we make a lil mistake,what your model? f180s/f180l/f180k?
I was convertiong LG F180k to E975
sunyakram said:
sorry if i was wrong,but many people including me use the method and have no worry,the problem only came when we make a lil mistake,what your model? f180s/f180l/f180k?
Click to expand...
Click to collapse
your guide is really great, I probably did something wrong. how can I tell if I am running the right baseband?
the baseband currently installed on my phone is APQ8064/MDM9x15M.
do you have another baseban file other than what you've linked to on your guide?
many thanks!
gilsh4321 said:
your guide is really great, I probably did something wrong. how can I tell if I am running the right baseband?
the baseband currently installed on my phone is APQ8064/MDM9x15M.
do you have another baseban file other than what you've linked to on your guide?
many thanks!
Click to expand...
Click to collapse
i dsnt post any guide on here or any where,okay?
here are the links
f180s
f180k
f180l
I flashed the baseband, but it is still permanently locked.
Any ideas as to how can it be unlocked? maybe if I will use other EFS backup?
will it be solved if I will go back to to the original KDZ?
gilsh4321 said:
Any ideas as to how can it be unlocked? maybe if I will use other EFS backup?
will it be solved if I will go back to to the original KDZ?
Click to expand...
Click to collapse
have you backed up your efs before installing kdz? it may help you for working sim cards.
but if you revert back to orignal kdz baseband is a issue here again
Did u hard reset after flashing kdz???
Sent from my Optimus G using Tapatalk
I have the same problem
atifsh said:
if it was working fine before try the same stock f180 firmware and see if that works, have no idea about sim unlocking on optimus G. search for that.
Click to expand...
Click to collapse
I have the same problem and when I turn it back to stock F180K firmware it recognizes any sim very well
---------- Post added at 12:04 PM ---------- Previous post was at 11:57 AM ----------
sunyakram said:
you need to flash f180 baseband, 1st check your f180 S or K or L then flash baseband made for your variant
Click to expand...
Click to collapse
This did not solve the problem.
The baseband fix seems to only fix the reception issues of the phone so that it can pick up the signal.
The problem I have is about the phone not recognizing the sim card. It will only recognize it when I go back to the stock F180K rom not the E975 rom.
By the way, all F180 phones are pre-unlocked by Korean law.
jung901 said:
I have the same problem and when I turn it back to stock F180K firmware it recognizes any sim very well
---------- Post added at 12:04 PM ---------- Previous post was at 11:57 AM ----------
This did not solve the problem.
The baseband fix seems to only fix the reception issues of the phone so that it can pick up the signal.
The problem I have is about the phone not recognizing the sim card. It will only recognize it when I go back to the stock F180K rom not the E975 rom.
By the way, all F180 phones are pre-unlocked by Korean law.
Click to expand...
Click to collapse
can you please help me?
even if i go back to stock f180k, i still can't get a signal
is it my sim?
i already flash the baseband but still no use
call me
coldmalice said:
can you please help me?
even if i go back to stock f180k, i still can't get a signal
is it my sim?
i already flash the baseband but still no use
Click to expand...
Click to collapse
You do not need to touch the baseband if you already flashed the F180K rom.
The sim should be recognized and baseband should be the right one already.
If you need further info add jseo to kakao talk and send me a message and we can talk real time. I'm in Seoul
jung901 said:
You do not need to touch the baseband if you already flashed the F180K rom.
The sim should be recognized and baseband should be the right one already.
If you need further info add jseo to kakao talk and send me a message and we can talk real time. I'm in Seoul
Click to expand...
Click to collapse
Can you please tell me what to do?
Invalid sim card after converting E975
neaznc021 said:
Can you please tell me what to do?
Click to expand...
Click to collapse
Hi Guys,
I need expert help here , it looks i brick my handset while i was trying to convert it into E975 by following the instruction
Guide
Regardless of which firmware you are currently running on your F180, you will need to download and switch to the corresponding one from the list below:
F180S : F180S20B_00.kdz
F180K : F180K20B_00.kdz
F180L : F180L20H_00.kdz
Tip: You can find your phone’s model by going to ‘Settings > About > Phone identity’ in Android.
Warning: Make sure your phone’s battery is at least charged 80%. Don’t proceed otherwise as LG Optimus G comes with non-removable battery and thus you won’t be able to easily swap the battery if it dies in the middle of the process.
It is mandatory that you factory reset your phone before proceeding. For doing so, go to ‘Settings > Privacy > Factory data reset’. Please keep in mind that doing so will wipe your phone including contacts, messages, mails, applications and all the data on your phone’s internal storage. Your phone will reboot twice. Let it boot after factory reset. Once you are on the language selection screen, power off your phone
Press and hold down ‘Volume Up’ + ‘Volume Down’ and while inserting USB cable in to the phone. This will get you to S/W download mode on LG F180.
Now you need to flash the firmware you downloaded earlier. Please refer to the guide here:
How to: Download and Install KDZ LG firmware – All Android models
Once the KDZ firmware is successfully flashed, your phone will reboot automatically. Once it fully boots up, go through the setup procedure and again factory reset it as you already did once.
Once you are on the language selection screen, power off your phone
Once again, put your phone in download mode
For converting your phone to E975, we’ll be flashing this E975 Hong Kong KDZ:
Follow the same procedure for flashing KDZ as you did earlier.
Once the KDZ flash is successful, go through the set-up procedure. Now go to ‘Settings > Storage’ and make sure your internal storage is being listed there. If it shows “0.00 GB” there, don’t panic. Power off your phone. Once completely off, press and hold down ‘Volume Down’ + ‘Power’ buttons until the phone displays a hard reset screen. Release ‘Volume Down’ and press ‘Power’ twice for resetting your phone.
Your phone will reboot once again and your phone’s internal storage will be back to normal.
Now you need to root your phone. Please refer to our LG Optimus G universal rooting guide here:
Universal root for LG Optimus G – Any firmware
Once you are done with rooting process, make sure you reboot your phone at least once if it doesn’t reboot automatically.
Now we will be flashing LG F180 baseband. Download your corresponding baseband backup from the list below:
F180S Baseband
F180K Baseband
F180L Baseband
Unzip the downloaded archive and you will find a batch file named ‘modem-flash’ inside it. Make sure ‘USB Debugging’ is enabled on your phone and your phone is in ‘Charge only’ mode while connected to the PC. Run the ‘modem-flash’ batch file.
Keep an eye on your phone screen as you will need to tap the grant permission button on SuperSU pop-up. If you miss the pop-up as it expires after 10 sec, run ‘modem-flash’ batch file again.
Once the baseband has been flashed successfully, reboot your phone
Congratulations! You have just converted LG F180 to LG E975.
it converted successfully but when i insert sim in it says invalid sim card , i have updated the base band given in above link but no luck then i tried to flash the original rom with many version for this set same thing again ,no signal no network .i think i mess up with the orginal modem without taking any kind of backup.
I need expert advise here how to fix it and which kdz to use to fix it.
looking forward for your reply.
Thanks,
@ranadawood: Flash original kdz file for your respective model to get back network ...
e.g F180L/k or S one
umair928 said:
@ranadawood: Flash original kdz file for your respective model to get back network ...
e.g F180L/k or S one
Click to expand...
Click to collapse
I already tried but no luck i tried F180K20O but no luck ,trying F180K30b_00 giving me extract erro.
Please let me know which could be the original rom for my phone and?
Thanks
ranadawood said:
I already tried but no luck i tried F180K20O but no luck ,trying F180K30b_00 giving me extract erro.
Please let me know which could be the original rom for my phone and?
Thanks
Click to expand...
Click to collapse
Follow this guide, This has also many fix included...
http://forum.xda-developers.com/showthread.php?t=2625044
and if none of above work for you than try to flash kdz with cdma mode rather than 3gqt and start kdz flashing by selecting CSE web upgrade test
HI !!!
recently i bought G3 D855 ..it was gud, but when i flash upgraded v30a.kdz thorugh its imei i got lot of trouble there is no working wifi,bluetooth,camera,no network ...
so i flash D855 EUR v10e.tot using Flashtool which flash completly everything but leave me in dark .. my phone got bricked i just got fastboot and nothing else...so i trie hard and mangae to bring back my device and acces download mode and flash that previous v30a.kdz ..and i was in same sitituation no network ,no camera working ,no wifi lots of error..
then i open my device and notice that it has LS990 board ..Frankenstien G3 ,so i downloaded ls990 stock firmaware but as you guyz know i have already flash d855 firmwre so ls990 will not flash ..so i am now tying to edit values of ls990 stock firmware to D855 so flash will flash it and i got my phone back .. i have pics whihc i took befre flashing factory firmware...
Before Flashing and Rooting and Installing TWRP.Stock recovery of my Phone i.e ls990vz4
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is my Phone board which i open after bricking my device:crying:
Before Flashing Factory Firmware V10n
LGUP Error
LG Flashtool Error when flashing LS990 on d855 ?
u need another thing
naeembabakheil said:
HI !!!
recently i bought G3 D855 ..it was gud, but when i flash upgraded v30a.kdz thorugh its imei i got lot of trouble there is no working wifi,bluetooth,camera,no network ...
so i flash D855 EUR v10e.tot using Flashtool which flash completly everything but leave me in dark .. my phone got bricked i just got fastboot and nothing else...so i trie hard and mangae to bring back my device and acces download mode and flash that previous v30a.kdz ..and i was in same sitituation no network ,no camera working ,no wifi lots of error..
then i open my device and notice that it has LS990 board ..Frankenstien G3 ,so i downloaded ls990 stock firmaware but as you guyz know i have already flash d855 firmwre so ls990 will not flash ..so i am now tying to edit values of ls990 stock firmware to D855 so flash will flash it and i got my phone back .. i have pics whihc i took befre flashing factory firmware...
Before Flashing and Rooting and Installing TWRP.Stock recovery of my Phone i.e ls990vz4
Here is my Phone board which i open after bricking my device:crying:
Before Flashing Factory Firmware V10n
LGUP Error
LG Flashtool Error when flashing LS990 on d855 ?
Click to expand...
Click to collapse
U need octopus box
Otherwise try it
First u have to flash laf.img via fastboot
Then u try to open extract tot.. From willcracker
On d855 tot file replace modem file from lg990
Recenty I'll crate a youtube video..
I faced same prob on my g2 d802/ls980 whatever
nibedankaran said:
U need octopus box
Otherwise try it
First u have to flash laf.img via fastboot
Then u try to open extract tot.. From willcracker
On d855 tot file replace modem file from lg990
Recenty I'll crate a youtube video..
I faced same prob on my g2 d802/ls980 whatever
Click to expand...
Click to collapse
thanks for reply .. fastboot command not work for me .. so how can i flash laf.img file ? i have extracted las990 stock firmaware throug boardiag ...but real problem is fastboot adb not work well ...although if i flash .kdz it will flash easily but ls990 has no kdz
naeembabakheil said:
thanks for reply .. fastboot command not work for me .. so how can i flash laf.img file ? i have extracted las990 stock firmaware throug boardiag ...but real problem is fastboot adb not work well ...although if i flash .kdz it will flash easily but ls990 has no kdz
Click to expand...
Click to collapse
Try to flash laf from boarddiag
I fixed my g3 verizon like this
nibedankaran said:
Try to flash laf from boarddiag
I fixed my g3 verizon like this
Click to expand...
Click to collapse
how to use boarddiag when phone was not in qhsub mode .. can boarddiag flash files in downlado mode or when phone is running in OS ?
naeembabakheil said:
how to use boarddiag when phone was not in qhsub mode .. can boarddiag flash files in downlado mode or when phone is running in OS ?
Click to expand...
Click to collapse
Oho you are really in a bad condition
Then you have a single one and only way that is fastboot.....any how
Is pc detect port?
Then via flash tool try flash d855
First you turn on your phone
Then flash d855 recovery_(i think you know how)
Use custom rom
nibedankaran said:
Oho you are really in a bad condition
Then you have a single one and only way that is fastboot.....any how
Is pc detect port?
Then via flash tool try flash d855
First you turn on your phone
Then flash d855 recovery_(i think you know how)
Use custom rom
Click to expand...
Click to collapse
i manage to flash .kdz file .. now i my phone got some life but one thing is missing my i flash US cellular .kdz which work fine but network is locked ?now is there any tool and method to unlock US Cellular network on my G3 ?
naeembabakheil said:
i manage to flash .kdz file .. now i my phone got some life but one thing is missing my i flash US cellular .kdz which work fine but network is locked ?now is there any tool and method to unlock US Cellular network on my G3 ?
Click to expand...
Click to collapse
Tools are there but not worked
U need to use custom twrp and custom roms with d850 kitkat moden flashable zip
It will be perfectly work
nibedankaran said:
Tools are there but not worked
U need to use custom twrp and custom roms with d850 kitkat moden flashable zip
It will be perfectly work
Click to expand...
Click to collapse
as i mentioned i have rooted but twrp not install so how flash rom wtoh that ??
...thats y i am asking about unlocking
naeembabakheil said:
as i mentioned i have rooted but twrp not install so how flash rom wtoh that ??
...thats y i am asking about unlocking
Click to expand...
Click to collapse
Plz unlock flash twrp try custom rom
**** .. i flash Ls990 .tot it flashes but my device is not turning on .. what should i do know .. device detected a normal in device manager ...no actitvity on screen just...
LG UP detect as Unknown device ,Com Port works...
Flashtool detect but give eror of SW error etc ...
LS990 Flashed with Box but no signals .. then i bring phone back and flash its modem from its orgnl OS ... Now Working ....
Thanks
Thread Closed
its not bricked just stuck.
naeembabakheil said:
HI !!!
recently i bought G3 D855 ..it was gud, but when i flash upgraded v30a.kdz thorugh its imei i got lot of trouble there is no working wifi,bluetooth,camera,no network ...
so i flash D855 EUR v10e.tot using Flashtool which flash completly everything but leave me in dark .. my phone got bricked i just got fastboot and nothing else...so i trie hard and mangae to bring back my device and acces download mode and flash that previous v30a.kdz ..and i was in same sitituation no network ,no camera working ,no wifi lots of error..
then i open my device and notice that it has LS990 board ..Frankenstien G3 ,so i downloaded ls990 stock firmaware but as you guyz know i have already flash d855 firmwre so ls990 will not flash ..so i am now tying to edit values of ls990 stock firmware to D855 so flash will flash it and i got my phone back .. i have pics whihc i took befre flashing factory firmware...
Before Flashing and Rooting and Installing TWRP.Stock recovery of my Phone i.e ls990vz4
Here is my Phone board which i open after bricking my device:crying:
Before Flashing Factory Firmware V10n
LGUP Error
LG Flashtool Error when flashing LS990 on d855 ?
Click to expand...
Click to collapse
I have the ls990 and can definitely tell you that the ls990-G3 variant is in fact very different from the other g3 variants out. Different partition sizes/mount points. I found out by flashing ls990/d855/us990/vz990/etc an all inclusive supposedly rom. which has now zeroed my carrier out. after flashing stock tot unlocking rooting flash custom twrp i proceeded to flash the separate stock partitions in twrp to boot reboot twrp flashed my rom and now atleast have it running again, now at the part where i im/chat with a tech to get my spc/msl to edit my mdn/min the last part recover my esn, meid/hexmeid from the sticker behind the phone battery. if all goes well i should be back to where i started.
my1989 said:
I have the ls990 and can definitely tell you that the ls990-G3 variant is in fact very different from the other g3 variants out. Different partition sizes/mount points. I found out by flashing ls990/d855/us990/vz990/etc an all inclusive supposedly rom. which has now zeroed my carrier out. after flashing stock tot unlocking rooting flash custom twrp i proceeded to flash the separate stock partitions in twrp to boot reboot twrp flashed my rom and now atleast have it running again, now at the part where i im/chat with a tech to get my spc/msl to edit my mdn/min the last part recover my esn, meid/hexmeid from the sticker behind the phone battery. if all goes well i should be back to where i started.
Click to expand...
Click to collapse
First Flash only LS990 Rom on your Phone ..
and second Why you flash random files ?
EFS has your IMEI settings etc ...
Another thing if you are still new to problem you can ask in G3 Whatsapp group Here is Invite Link
Join and get instant help ...Thanks
hello,anyone know how to fix unknown baseband and imei is also null. I try to install stock rom but nothing happen my variant is f400s
I buy my new phone about month ago,i had 4.3 JB firmware,and then i update to 4.4.2,then i seen a problem i can't call someone,i can't use mobile internet,i can't receive a messages or a calls,i tried to downgrade again to 4.3,same problem,i tried to insert other sim card,i tried everything and nothing works,my Wi-Fi works but not Sim-Card,It says "Not Registered on Network"
bump
bump please help
Does the phone show the correct imei? Could the phone be blacklisted? Model in download mode is n7100? How did you update to 4.4.2?
Download and install MobileOdin, copy stock 4.3 on your device then install ROM from device.
tin2404 said:
Download and install MobileOdin, copy stock 4.3 on your device then install ROM from device.
Click to expand...
Click to collapse
Uradio sam to,idalje isti problem
audit13 said:
Does the phone show the correct imei? Could the phone be blacklisted? Model in download mode is n7100? How did you update to 4.4.2?
Click to expand...
Click to collapse
I know nothing about IMEI,i update it with Odin.
If the phone does not have the correct imei #, it will not connect to a carrier network.
check your IMEI by typing in the dialing screen *#06# and see if its start at 0499 or its on Null/Invalid
i had a similar problem which i updated from 4.1.2 to 4.2.2
the IMEI was correct but it still was stuck on emergency call only
i found this modem file which helped me.
i tried flashing all kind of roms with this modem but it was pointless..
until i tried flashing that Omega v4.2.2 rom and then flashed the modem again
and it actually worked..no clue how did it work on the Omega and not for the others but oh well..
now im on CyanogenMod 5.1.1 and the phone is fully working.
If you planning on doing something like that (messing with your phone rom and such..) dont forget to make a FULL backup.
kapac7a said:
I buy my new phone about month ago,i had 4.3 JB firmware,and then i update to 4.4.2,then i seen a problem i can't call someone,i can't use mobile internet,i can't receive a messages or a calls,i tried to downgrade again to 4.3,same problem,i tried to insert other sim card,i tried everything and nothing works,my Wi-Fi works but not Sim-Card,It says "Not Registered on Network"
Click to expand...
Click to collapse
I had similar problem and worked fine..download 4.3 or 4.4.2 from Sammobile stock XEO Poland or XEF France ROM. They have modem we in Croatia use. Problem is not in ROM then in your modem or your device is locked on one carier but you have wrong different carier SIM.
Or just look here for modems then flash it with Odin but over computer.In ODIN check "nand erase all".
Of course you need to wipe everything ,flash ROM then flash modem separatly but it MUST BE XEO or XEF modem !
Hello,
I have a lg g4 815h bought from ebay India and using in India for a few months back...it was working fine till yesterday. A pop up was coming for a system update since 1 month so I decided to perform the update ...so I allowed the update but as soon the phone rebooted and the android sign came it showed error.
After 5 mins nothing happned so i restarted the device it booted but since then the camera is is not working says unfortunately camera has stopped ,even my phone call pick up screen is not showing when there is a call to answer...
I can call some one but cannot end the call due to no calling screen is appearing.
I did hard reset but the situation is same...
Should I flash using lg flash tool ?any version works on windows xp?I only have a windows xp Pc...
Or please provide a solution which can be performed using recovery like twrp...
Please help...
Thanks in advance
If any advices to flash my device using twrp please also suggest me a simple and stable rom
file...
Thanks
Kind Regards
one more problem I have Identified on my phone ,
I can see the hardware serial no shows LGLS991852e50ae which can be a sprint phone but the software installed shows that the phone's model is H815...
what to do...
please help
ur phone is REFURBISED?
karan5567 said:
one more problem I have Identified on my phone ,
I can see the hardware serial no shows LGLS991852e50ae which can be a sprint phone but the software installed shows that the phone's model is H815...
what to do...
please help
Click to expand...
Click to collapse
open phone . take out mother board .. and read plaque model. if sprint flash sprint KDZ and LGUP. if H815 then do that .. thats the only way to be sure.
U have a refurbished model.Go to nearest mobile repair shop & take out your motherboard to see what model no is written on this.Then flash a rom accoringly. Don't flash any other rom just by assuming else you will brick your device.
Yes my phone is refurbished...
But how to flash the rom?
If I found it to be a sprint version and flash a sprint rom ...it will be locked?I am using phone in India...
Any chance to root the phone and install twrp?
Then flash a custom rom?
Please help...
karan5567 said:
Yes my phone is refurbished...
But how to flash the rom?
If I found it to be a sprint version and flash a sprint rom ...it will be locked?I am using phone in India...
Click to expand...
Click to collapse
Most probably it will be locked cause most higher Android versions LG has blocked rooting or unlocking..But you can always browse few threads.
Mine is also a refurbished model with F500L motherboard,LS911 body & had H815 global rom installed out of the box.I am currently on F500L Nougat locked & unrooted..I have tried almost every method.It failed to root & even to enter fast boot.
If you get your proper model no on motherboard then just flash the rom with ToT flasher in download mode with respective DLL.
asingha94 said:
Most probably it will be locked cause most higher Android versions LG has blocked rooting or unlocking..But you can always browse few threads.
Mine is also a refurbished model with F500L motherboard,LS911 body & had H815 global rom installed out of the box.I am currently on F500L Nougat locked & unrooted..I have tried almost every method.It failed to root & even to enter fast boot.
If you get your proper model no on motherboard then just flash the rom with ToT flasher in download mode with respective DLL.
Click to expand...
Click to collapse
Thanks for your reply...
Your network is locked?
You cant unlock it?
Can we degrade our Os to lollipop to get root?
Even I cant turn on the Enable OEM unlock under the developer mode...
Any more advices?
Please help.....
I have tried almost all h815 ans ls991 roms with all flashing methods but still unable to successfully flash my device...lg tot flash tool always show dl error after 4 to 6 percent of flashing...
Please help
Any idea's?
Pick the phone, and send it to the place where you bought it. If you have warranty the repair is free, if not, then you must pay sadly.
Still no solution, I even cannot enable OEM unlock under developer options...
It automatically disables it...
Please help
Just experienced this issue after changing sim card... Call and Camera stopped working over and over again.
How I solved it: Go to the specific app that is causing you trouble, and clear cache/files (too bad I only found this after 3 factory resets).
Maybe it will help ... LG G4 CAM
Hello i have Global Device 6/128 GB unlocked.
i Successfull flashed xiaomi.eu_multi_MIMAX3_9.7.4_v10-9 Weekly and then i make full BACKUP with TWRP.
All just run fine.
Then i Updated via TWRP c...
Theni testet Ressurection Kernel 6.
After that i cannot use Fingerprint anymore.And cannot delet the Fingerprints that i learned with Phone.
Wiping Cache and Dalvik also didnt Help.
So i thoght its because the Kernel.
So i Dirty flashed again xiaomi.eu_multi_MIMAX3_9.8.1_v10-9 .
After tha the password of my phone didnt match.So i Make full WIPE of my Device "YES" in TWRP. FORMAT DATA.
Then i tryed to Restoere my Backup wich was make with TWRP.But it always Hangs on "SYSTEM Image" and FAILS.
So i tryed to make a new Install with xiaomi.eu_multi_MIMAX3_9.8.1_v10-9.
It boots and i can Use it but my IMEIs from SLOT1 and SLOT2 are "0" ...No imei.
Also it shows no Baseband and no Bluetooth Address.
MAc Adress is Present.
So i searched Internet that i have to restore the EFS Partition.
I done zthis but Imei is again not showing.
Is my Phone now bricked or is there a chance to get my imei back ?
Try flashing stock fastboot rom with MiFlash.
And if you have a 6/128 model it is a China version, Global version of that model doesn't exist. So if you flash Global fastboot rom keep in mind to choose 'Clean all' instead of 'Clean all and lock' in MiFlash. This is very important because it will brick your phone when done wrong.
mierlo420 said:
Try flashing stock fastboot rom with MiFlash.
And if you have a 6/128 model it is a China version, Global version of that model doesn't exist. So if you flash Global fastboot rom keep in mind to choose 'Clean all' instead of 'Clean all and lock' in MiFlash. This is very important because it will brick your phone when done wrong.
Click to expand...
Click to collapse
I tryed this. Flashed via MiFlashtool the Global Stable .Did not Help me.
Again no Imei and no Baseband Available.....
Its now on Global Stable 10.3.3.0 ...
majo3000 said:
I tryed this. Flashed via MiFlashtool the Global Stable .Did not Help me.
Again no Imei and no Baseband Available.....
Its now on Global Stable 10.3.3.0 ...
Click to expand...
Click to collapse
You need to reflash persist.img that matches your firmware
here is the instructions
https://translate.googleusercontent...Jrhi2V70LG9aacGv6M8dbfpVoZLb1Ew#entry78571590
check even this one out
https://translate.googleusercontent...JrhieUa5tVbP0pu8QSGUm8vr0V5ZN6A#entry79813319
eliaztheone said:
You need to reflash persist.img that matches your firmware
here is the instructions
https://translate.googleusercontent...Jrhi2V70LG9aacGv6M8dbfpVoZLb1Ew#entry78571590
check even this one out
https://translate.googleusercontent...JrhieUa5tVbP0pu8QSGUm8vr0V5ZN6A#entry79813319
Click to expand...
Click to collapse
this doesnt HELP.
I tryed it in TWRP
But again no EMEI Present after reboot =(
NEED QCN FIle.
After a long search i think i have to do this tutorial.But i need help !
https://www.androidbrick.com/ultima...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
I need a ".qcn" Backup File from another MiMax3 and the "imei" wich belongs to that backup and Phone from another Person.
if have this i can search the "Imei" in backup File and can Add my "IMEI" wich is present on my Phonepacking.
If someone can help me that would be very wonderfull. But better help me on "PN" ....
Tryed really all things.... i think that would help.
Things i tryed : Flash Modem , Flash Firmware , MIflash (fllashall),flash Persist ....and so on.....
Hope someone can help me
Mismo problema
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
kacike69 said:
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Click to expand...
Click to collapse
Do you have also a China Version of that Phone and a Global Image was flashed ? 6/128 GB is sure China Version.
Yes i need a .qcn Backup from another Phone with an "imei" Present.then i can add my imei and flash back the qcn file.
I tryed everything.Only thing i didnt is flashing a China Fastboot Rom. Its because i flashed 10.3.3.0 Global ....but at the moment only china 10.3.2.0 is present....
And it will Hardbrick the Device if i try to flash China.I must wait that Version 10.3.3.0 is out.
The thing to enable diag mode is..... i did it with ADB.But i think phone must be rooted.
# adb shell
# su
# setprop sys.usb.config diag,adb
have you tryed to make a clean flash via Miflash with fastboot rom ?
majo3000 said:
Do you have also a China Version of that Phone and a Global Image was flashed ? 6/128 GB is sure China Version.
Yes i need a .qcn Backup from another Phone with an "imei" Present.then i can add my imei and flash back the qcn file.
I tryed everything.Only thing i didnt is flashing a China Fastboot Rom. Its because i flashed 10.3.3.0 Global ....but at the moment only china 10.3.2.0 is present....
And it will Hardbrick the Device if i try to flash China.I must wait that Version 10.3.3.0 is out.
The thing to enable diag mode is..... i did it with ADB.But i think phone must be rooted.
# adb shell
# su
# setprop sys.usb.config diag,adb
have you tryed to make a clean flash via Miflash with fastboot rom ?
Click to expand...
Click to collapse
I am in the same boat! exact same situation, did you manage to ever solve this?