Related
Hey guys, please help me out. I tried reverting back to stock AT&T HTC One M8 but I seem to have managed to remove the entire OS. I was following a guide on here on how to revert back but whatever I did in RUU, it completely ruined the phone so far. I can't load past the HTC logo. I'm able to install a custom recovery program but I don't know how to get back to anything at this point. I'm going to try to flash a custom ROM and see if that works but ultimately I'd like to go back to completely stock ROM. Thank you for the responses in advance.
First, flash a ROM in recovery to get it working again. Secondly, read the guides on going back to stock more thoroughly and make sure you understand what you're actually doing before trying to go back to stock again (the same is true before you even think about unlocking the phone - why do something when you have no idea what to do if something goes wrong?!?!).
I know my response may sound harsh but if you'd read up on everything first before doing anything then this question wouldn't have to be asked over and over again by multiple people every day...
EddyOS said:
First, flash a ROM in recovery to get it working again. Secondly, read the guides on going back to stock more thoroughly and make sure you understand what you're actually doing before trying to go back to stock again (the same is true before you even think about unlocking the phone - why do something when you have no idea what to do if something goes wrong?!?!).
I know my response may sound harsh but if you'd read up on everything first before doing anything then this question wouldn't have to be asked over and over again by multiple people every day...
Click to expand...
Click to collapse
Thank you for the response, appreciate it! I do read almost everything before flashing my devices, I like to see what problems people encounter before I attempt to mess with my phone. But I just found my mistake I ran into. The guide I was reading was about going from GPE to Sense Stock (I had maybe 4hrs of sleep in my defense on being brain dead). I did flash back to a custom ROM for now, I'll just do some more further research on going back to stock sense. Is it just as simple as getting the ROM and flashing like the custom ROMs?
Jayanyway said:
Thank you for the response, appreciate it! I do read almost everything before flashing my devices, I like to see what problems people encounter before I attempt to mess with my phone. But I just found my mistake I ran into. The guide I was reading was about going from GPE to Sense Stock (I had maybe 4hrs of sleep in my defense on being brain dead). I did flash back to a custom ROM for now, I'll just do some more further research on going back to stock sense. Is it just as simple as getting the ROM and flashing like the custom ROMs?
Click to expand...
Click to collapse
So, were you running a GPe ROM or a Sense ROM? If you were running a Sense ROM you just need to restore a backup to get it back to stock. What software build was the phone on when you bought it new?
EddyOS said:
So, were you running a GPe ROM or a Sense ROM? If you were running a Sense ROM you just need to restore a backup to get it back to stock. What software build was the phone on when you bought it new?
Click to expand...
Click to collapse
I was on a Sense ROM. Android Revolution to be exact. And if you're talking about this number: 1.54.401.5 then I was that?
So just find a backup and restore to it? And that'll allow me to grab OTA updates too?
Jayanyway said:
I was on a Sense ROM. Android Revolution to be exact. And if you're talking about this number: 1.54.401.5 then I was that?
So just find a backup and restore to it? And that'll allow me to grab OTA updates too?
Click to expand...
Click to collapse
If your phone was on 1.54.401.5 when you first got it (or before you flashed a custom ROM), and if you're S-OFF, you can follow the guide in my signature to go back to 100% stock
EddyOS said:
If your phone was on 1.54.401.5 when you first got it (or before you flashed a custom ROM), and if you're S-OFF, you can follow the guide in my signature to go back to 100% stock
Click to expand...
Click to collapse
Now what if I'm not 100% sure what build number I was before messing with my phone? Good chance of bricking? And one last question I promise, If I do go back to stock Sense ROM, can I still be rooted. S-Off, bootloader unlocked and still receive OTA updates? Or would I have to lock down again? I did read your guide, I was just wondering if I would still receive em before I decide to do all this work again lol
I really appreciate the quick responses. You're awesome.
Jayanyway said:
Now what if I'm not 100% sure what build number I was before messing with my phone? Good chance of bricking? And one last question I promise, If I do go back to stock Sense ROM, can I still be rooted. S-Off, bootloader unlocked and still receive OTA updates? Or would I have to lock down again? I did read your guide, I was just wondering if I would still receive em before I decide to do all this work again lol
I really appreciate the quick responses. You're awesome.
Click to expand...
Click to collapse
If you're not sure on the original build then I wouldn't follow my guide. Do you know the CID of your phone? to check, run the following fastboot command:
fastboot getvar all
And post the results (blanking out the S/N and IMEI)
EddyOS said:
If you're not sure on the original build then I wouldn't follow my guide. Do you know the CID of your phone? to check, run the following fastboot command:
fastboot getvar all
And post the results (blanking out the S/N and IMEI)
Click to expand...
Click to collapse
Well I recently changed my CID to that 11111111 CID but here's what I got from that command:
Jayanyway said:
Well I recently changed my CID to that 11111111 CID but here's what I got from that command:
Click to expand...
Click to collapse
Looks like an AT&T model to me.
Something that is not clear to me: Did you convert your phone to GPE or not? The partiton sizes are different so, if you did a GPE conversion you would need to convert your firmware partitions back.
If you didn't convert to GPE, you should just be able to restore a CWS__001 backup from the stock backups thread in the general section, flash stock recovery and download/install the OTA.
exad said:
Looks like an AT&T model to me.
Something that is not clear to me: Did you convert your phone to GPE or not? The partiton sizes are different so, if you did a GPE conversion you would need to convert your firmware partitions back.
If you didn't convert to GPE, you should just be able to restore a CWS__001 backup from the stock backups thread in the general section, flash stock recovery and download/install the OTA.
Click to expand...
Click to collapse
Yes, I have an AT&T HTC One M8. As far as I know, I never converted to GPE. Here's a history of what I've done as far as flashing goes.
Unlocked bootload, rooted, went S-Off, flashed Android Revolution, flashed Viper ROM, went back to Android Revolution then tried to go back to stock and broke my phone. Now I'm back on Android Revolution. I did a whole bunch of factory resets/dalvik wipes and such so maybe that's why it looks confusing?
exad said:
If you didn't convert to GPE, you should just be able to restore a CWS__001 backup from the stock backups thread in the general section, flash stock recovery and download/install the OTA.
Click to expand...
Click to collapse
Sent from my HTC One_M8 using XDA Free mobile app
Same Problem?
Hey folks!
I have the same question I think and I don't want to open a new thread.
I flashed SinlessRom over ViperOne without converting to GPe and now I'm stuck in a bootloop...
Can I restore a CWS__001 backup from the stock backups thread, flash stock recovery and I'm good to go?
Edit: Ok, my m8 is working now after flashing ViperOne, because it fixed the partitions
Edit2: There is still no information about the os when I'm booting into the bootloader
Does nobody know, why there is no firmware version?
Missing OS in HBOOT resolution
Finally got the answer I was looking for!
Download the modified TWRP from here:
http://forum.xda-developers.com/showthread.php?p=54054835
You are going to have to flash your current firmware first before installing it for the OS info to show up again in HBOOT. You can use the Flashify app to install it or else just do it the PC/ADB way using command prompt like I did. It totally worked for me, so go ahead and try it!!
If you have questions on how to flash anything, lemme know.
RockStar2005
Lintux_ said:
Does nobody know, why there is no firmware version?
Click to expand...
Click to collapse
Deleted.
Sorry didn't see your post @RockStar2005
Disregard this message!!
HTCNerdYoda said:
Deleted.
Sorry didn't see your post @RockStar2005
Click to expand...
Click to collapse
Yoda,
Hey........ disregard my previous message. That version of TWRP DOES work (fixing "Blank OS" issue), HOWEVER........ I created a new backup using it and then tried to restore it over the weekend........... IT DIDN'T WORK! I think something is corrupted with it. So anyone who clicked on that link and got that version of twrp, delete it and ANY BACKUPS YOU CREATED WITH IT immediately. They are corrupted and useless.
Fortunately though, I was able to find a fully-operational version of TWRP over the weekend that has no issues and it too fixes the "Blank OS" problem too. Here you go:
http://themikmik.com/showthread.php?16278-SPRINT-RECOVERY-TWRP-Recovery-(UNOFFICIAL)-v2-7-0-4 (Control + F this: "Downloads TWRP Recovery 2.7.1.0 (DH) | Mirror (AFH) - build date: July 13, 2014". I downloaded from the Mirror link.)
Don't worry about it saying Sprint...... the dev CONFIRMED it works for all variants/carriers. So after creating a new backup using the standard twrp, I went back to stock recovery, re-flashed my most recent firmware (2.22.401.5), and then switched over to that new version of twrp........ created a new backup and then restored it using that new version. Worked like a charm!! And the "blank OS" issue........... gone! I highly recommend it!!
So please delete that old twrp and any backups you created using it, and you should be good to go!
P.S. My thanks to Midasgalp and also Captain Throwback!!
RockStar2005
Thanks.
Sent from my HTC One_M8 using XDA Free mobile app
Thanks.
Sent from my HTC One_M8 using XDA Free mobile app[/QUOTE]
Anytime buddy!
RockStar2005
My M8 has the CID of HTC_044 and I would like to flash latest ROM. However it requires latest firmware, ie 2.22.401.4, I am wondering if it is safe to flash the firmware to my device being with different CID as the firmware's android-info does not contain my device CID.
I have S-OFF on my device, I am wondering if I change mt CID to supercid would allow my device to run the firmware without issue.
Thanks in advance.
Yep,if your phone is supercid,u can flash that firmware...
hellcommando said:
My M8 has the CID of HTC_044 and I would like to flash latest ROM. However it requires latest firmware, ie 2.22.401.4, I am wondering if it is safe to flash the firmware to my device being with different CID as the firmware's android-info does not contain my device CID.
I have S-OFF on my device, I am wondering if I change mt CID to supercid would allow my device to run the firmware without issue.
Thanks in advance.
Click to expand...
Click to collapse
If your firmware for CID HTC__044 is 2.22.707.3, it is not necessary for you to flash another firmware to run a 2.22.401.4 ROM.
As long as the firmware is 2.22.xxx.x ... you're good to go.
Anyway it's up to you if you want to flash 2.22.401.4 firmware but your Radio will be the EU region if the firmware that you flash come with radio image. If you currently in Asia, it's best to keep 2.22.707.3 firmware
hdorius said:
Yep,if your phone is supercid,u can flash that firmware...
Click to expand...
Click to collapse
Thank you!
ckpv5 said:
If your firmware for CID HTC__044 is 2.22.707.3, it is not necessary for you to flash another firmware to run a 2.22.401.4 ROM.
As long as the firmware is 2.22.xxx.x ... you're good to go.
Anyway it's up to you if you want to flash 2.22.401.4 firmware but your Radio will be the EU region if the firmware that you flash come with radio image. If you currently in Asia, it's best to keep 2.22.707.3 firmware
Click to expand...
Click to collapse
Thank you! However I have heard there was one 2.22.7xx posted but was meant for M7, and at the moment I could not find 2.22.707.3 firmware from any firmware repository. I'm from Asia, could you please kindly post the link so that I wont brick my phone? Thank you!!
hellcommando said:
Thank you! However I have heard there was one 2.22.7xx posted but was meant for M7, and at the moment I could not find 2.22.707.3 firmware from any firmware repository. I'm from Asia, could you please kindly post the link so that I wont brick my phone? Thank you!!
Click to expand...
Click to collapse
When we read firmware we look at x.xx.707.x not 2.22.7xx.x
You don't need 2.22.707.3 firmware if you already done the OTA update.
Please advise your current firmware that you have ... check what is written on the bootloader ... is it 1.54.707.7 or 2.22.707.3 ?
If it is 1.54.707.7 then you need to do OTA update.
If it is 2.22.707.3 then you're good to flash any ROM.
ckpv5 said:
When we read firmware we look at x.xx.707.x not 2.22.7xx.x
You don't need 2.22.707.3 firmware if you already done the OTA update.
Please advise your current firmware that you have ... check what is written on the bootloader ... is it 1.54.707.7 or 2.22.77.3 ?
If it is 1.54.707.7 then you need to do OTA update.
If it is 2.22.707.3 then you're good to flash any ROM.
Click to expand...
Click to collapse
Couldn't check my firmware version as the OS field is empty in the bootloader.
Hboot: 3.16.0.0000
Radio: 1.16.2133156.UA10G
But I highly doubt my firmware is 2.22.707.3, I would think it is more likely to be 1.54.707.7 as I have rooted by phone before newer firmware roll out.
So can I use your firmware in http://forum.xda-developers.com/showthread.php?t=2701376&page=141
and flash it by using this guide? http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
hellcommando said:
Couldn't check my firmware version as the OS field is empty in the bootloader.
Hboot: 3.16.0.0000
Radio: 1.16.2133156.UA10G
But I highly doubt my firmware is 2.22.707.3, I would think it is more likely to be 1.54.707.7 as I have rooted by phone before newer firmware roll out.
So can I use your firmware in http://forum.xda-developers.com/showthread.php?t=2701376&page=141
and flash it by using this guide? http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
Click to expand...
Click to collapse
Right ... your current hboot is 3.16 so it's 1.54.707.7
I suggest that you restore 1.54.707.7 stock Backup, flash back stock recovery and do the OTA (no need to relock bootloader or S-On .. OTA update work on unlocked bootloader and S-Off)
I don't post firmware on XDA. Those that I posted are recovery and stock backup.
If you insist to update firmware without OTA update .. that's you call. Someone maybe will guide you how to do it as I don't feel comfortable telling how to update firmware.
ckpv5 said:
Right ... your current hboot is 3.16 so it's 1.54.707.7
I suggest that you restore 1.54.707.7 stock Backup, flash back stock recovery and do the OTA (no need to relock bootloader or S-On .. OTA update work on unlocked bootloader and S-Off)
I don't post firmware on XDA. Those that I posted are recovery and stock backup.
If you insist to update firmware without OTA update .. that's you call. Someone maybe will guide you how to do it as I don't feel comfortable telling how to update firmware.
Click to expand...
Click to collapse
Awesome! I just followed your advice by doing the safe way, flashed stock recovery and backup. I'm running on 2.22.707.x now! Thanks a lot :good:
hellcommando said:
Awesome! I just followed your advice by doing the safe way, flashed stock recovery and backup. I'm running on 2.22.707.x now! Thanks a lot :good:
Click to expand...
Click to collapse
Great
Now you can flash any Sense 6 custom ROM that you like.
Only remember that you don't need to flash another firmware, your current one is good enough.. just flash ROM.
I am having the same issue - I have the HTC__044 and need new firmware to get the newest ROM.
I am S-On and CANT get S-off (s-off needed to flash firmware)...firewater does not work with my phone after multiple tries.
I tried getting Sunshine to work for s-off, but I need to be on a stock Sense ROM (I am on Viper 1.8) and don't have a stock backup. I can't find ANY stock ROM's online! Once I have supercid i was going to flash firmware, but without S off...I'm going nowhere (it seems)
anyone have an idea where I should start?
charkswitlazers said:
I am having the same issue - I have the HTC__044 and need new firmware to get the newest ROM.
I am S-On and CANT get S-off (s-off needed to flash firmware)...firewater does not work with my phone after multiple tries.
I tried getting Sunshine to work for s-off, but I need to be on a stock Sense ROM (I am on Viper 1.8) and don't have a stock backup. I can't find ANY stock ROM's online! Once I have supercid i was going to flash firmware, but without S off...I'm going nowhere (it seems)
anyone have an idea where I should start?
Click to expand...
Click to collapse
Stock ROMs and recoveries for HTC__044
http://forum.xda-developers.com/showthread.php?t=2701376
charkswitlazers said:
anyone have an idea where I should start?
Click to expand...
Click to collapse
Everything that you need is here : http://forum.xda-developers.com/showthread.php?t=2701376
1. Restore nandroid backup 1.54.707.7
2. flash stock recovery 1.54.707.7
3. reboot and check for OTA
4. install OTA
5. done .. your ROM will be 4.4.3 - 2.22.707.3
6. flash any 4.4.3 custom ROM that you like if any
All above no need to relock bootloader or S-Off, it works on S-On
If you want to S-Off with sunshine, step 1 & 2 then sunshine
or after step 5 then sunshine (both way should work)
ckpv5 said:
Everything that you need is here
1. Restore nandroid backup 1.54.707.7
2. flash stock recovery 1.54.707.7
3. reboot and check for OTA
4. install OTA
5. done .. your ROM will be 4.4.3 - 2.22.707.3
6. flash any 4.4.3 custom ROM that you like if any
All above no need to relock bootloader or S-Off, it works on S-On
If you want to S-Off with sunshine, step 1 & 2 then sunshine
or after step 5 then sunshine (both way should work)
Click to expand...
Click to collapse
I'm still a little on the noob side with rooting/flashing..I am at work and don't have time to read much - i will go home and give it a go... I'm sure I will have lots of questions
A quick look at the site, i saw lots of recoveries but not very many stock ROMs. I mainly just need a plain/rooted stock Sense rom to run Sunshine. After which i can flash new firmware, then the new custom ROM i've been wanting. Also, does a nandroid HAVE to be HTC__044, or can it be any WWE cid? (like anything that's "HTC__xxx")?
Excuse my ignorance...trying to learn as much as possible
I just got my m8 from Tmobile today, and I am on firmware 157.531.7
I've checked several times for updated firmware, but always comes back nothing.
Am I stuck on this, or will it take awhile for the network to "see me" and send it?
not rooted, fully stock for now
thanks so much!
charkswitlazers said:
I'm still a little on the noob side with rooting/flashing..I am at work and don't have time to read much - i will go home and give it a go... I'm sure I will have lots of questions
A quick look at the site, i saw lots of recoveries but not very many stock ROMs. I mainly just need a plain/rooted stock Sense rom to run Sunshine. After which i can flash new firmware, then the new custom ROM i've been wanting. Also, does a nandroid HAVE to be HTC__044, or can it be any WWE cid? (like anything that's "HTC__xxx")?
Excuse my ignorance...trying to learn as much as possible
Click to expand...
Click to collapse
If your main purpose to restore to stock to get SunShine working, then any nandroid backup will do either HTC__044 or WWE. You don't really need a rooted stock as SunShine works on non-rooted ROM too.
As you said you're a noob, that is why I suggest to restore to 1.54.707.7 then OTA to 2.22.707.3 so you don't need to manually flash firmware to get other custom ROMs running flawlessly. It is not necessary to have 2.22.401.4 firmware but it is necessary to have a 2.22.xxx.x firmware for those custom ROMs, unless you're not in Asia.
As you can see in my sig, I'm on 2.22.707.3 firmware, I can run any ROM without problem.
Being a noob, you may make a stupid mistake when flashing firmware.
There is also by mike or so a stock Rom as a zip.
Flash it like a custom Rom Flash the stock kernel and better the recovery and do sunshine...easier then with getting nandroid backup etc
Slow Booting & Sense 6 Toolbox Not Working On ARHD v10.2
One-M8-Master said:
There is also by mike or so a stock Rom as a zip.
Flash it like a custom Rom Flash the stock kernel and better the recovery and do sunshine...easier then with getting nandroid backup etc
Click to expand...
Click to collapse
Hi One-M8-Master,
I've read quite a few of your posts & given that your moniker seems appropriate, I'm wondering if you might be able to help me?
I've posted this on another thread but haven't got very far as yet, so am hoping that you might be able to get me out of the stupid hole I've dug myself into :fingers-crossed:
It is quite a long description but if you don't fall asleep reading it, I'd really appreciate any help you might be able to give me.....Here goes:
"Hi Guys,
Now I know you're all already thinking that I didn't update my firmware before I flashed ARHD & now I'm getting all the problems that come along with not doing that......& you'd be correct....kind of. HOWEVER, as it turns out, I already seem to have it. Let me explain.
As you can see, I'm relatively new to all this but successfully unlocked, rooted & installed a custom ROM on my ASUS TF700T tablet, so I wanted to do it with my One M8. I always do loads of reading before I start anything (I even read the instructions for new games before I attempt to play them because I'm a bit weird like that!) but what happened on this occasion was that I did the reading, unlocked the phone, flashed TWRP, & rooted it but then ran into the problem that some people appear to have had when trying to s-off via the adb commands & Firewater, that is, my pc could see the phone but when I gave the reboot command, it told me it wasn't connected.
I then got into hours of reading to try & solve this issue, discovered that (without Sunlight) on some devices it just doesn't work once you've accepted the 'should we allow this pc to connect every time' message (which I NEVER normally say 'yes' to), unless you install the Android Studio & Java Develpers Kits, update your version of adb, & force the phone to ask again (which I did but it turned out that I already had the latest version of adb, so that route proved fruitless!). I actually missed a night's sleep trying to resolve the problem, so work wasn't good the next day! but I think it is here is where my problems started because I was so tired & frustrated that I just picked a ROM & flashed it. I had even read the warning about not flashing it if you didn't have the correct firmware but I think that being so tired, it didn't really sink in, or I'd forgotten about it by the time I just flashed the ROM.
By this point, I'd been sat in front of my pc for about 30 hours & needed to go to work but the phone was actually booting through to ARHD, so I was relatively happy in the knowledge that at least I hadn't bricked it! On starting to use the phone that evening, I noticed the long boot times & then that my Sense 6 Toolbox didn't seem to be making any changes, even if I rebooted the device, so I went back to the beginning of this thread & started reading again. Thus, I re-read the firmware warning & panicked (my 2nd mistake!), thinking that I was getting the problems because I hadn't updated the firmware (it still didn't occur to me to just check because I think I just assumed that I wouldn't have it). So.....I tried to restore my TWRP backup of the stock ROM that I made after I had unlocked/rooted, with the intention of reverting to the stock ROM, getting the OTA update & then re-flashing ARHD but despite TWRP telling me that the backup had been successful, the phone went into a bootloop back into TWRP. I solved this by re-flashing the ARHD ROM that I knew at least would get my phone out of the bootloop & back into KitKat, which it did. I then checked what version of the firmware I had & to my surprise, my Build Number in About\Software Information\More says "2.22.401.4 CL365360 release-keys", so it looks like I had the correct firmware version all along?
The above being the case, I'm now puzzled as to why I'm getting the problems that I'm getting with ARHD? Does anyone have any clues/answers that might get me out of this hole I've dug for myself & get my awesome One M8 working like it should?
I know I've caused this problem by doing things when I was too tired to think straight but I'm fresh as a daisy now (still fairly noobish but fresh ) & now I need your help to sort myself out. I would be so grateful for any help anyone can give me to get me back on track.
I hope all of that makes sense & thanks in advance."
@dan5001
The firmware you speak of is the displayed version main number of the flashed rom. It has no relation to your actual installed firmware. Check your bootloader and post here what it says. I bet it is still hboot 3.16 and if that's the case your firmware is not updated.
Mr Hofs said:
@dan5001
The firmware you speak of is the displayed version main number of the flashed rom. It has no relation to your actual installed firmware. Check your bootloader and post here what it says. I bet it is still hboot 3.16 and if that's the case your firmware is not updated.
Click to expand...
Click to collapse
Hi.
This is my own fault but I'm getting really frustrated with it because I've probably spent a total of 40 hours on it so far
I tell you that because I know that I needed S-OFF & SUPER CID to be able to update my firmware, so I just thought "screw it" & I paid for Sunshine. I now have S-OFF & following Vomer's guide here:
http://forum.xda-developers.com/htc-one-m8/general/vomerguides-m8-bootldr-unlock-s-off-t2800727
I now have S-OFF & SUPER CID. I thought that would be the end of my issues but it would appear not!
Looking at my bootloader, you are correct, HBOOT is 3.16.0.0000!
However, I've tried to upgrade this firmware by downloading what I think is the correct update .zip from the list at the bottom of the aforementioned Vomer's guide (v2.22.401.5 (Rename to firmware.zip after downloading)), renaming it as suggested, & then flashing it in TWRP but it just keeps telling me that the update has failed!
Do I have to do it using the adb commands on Vomers guide? I didn't think so but it's just not working??
I appreciate any help you can give me with this. Given that I've spent so long on this & have paid for Sunshine, you can see that I'm trying to help myself but I've still got rain!!
EDIT
Just a thought, I do still have ARHD v10.2 installed at the moment because even though it's not working properly without the correct firmware, it's the only ROM I've got at the moment, so it means I can use the M8 to a degree; would that cause the problem with upgrading the firmware?
Firmware flash can be done via fastboot commands, that's how i did it
Installed rom has no influence on the to flash firmware, try it via fastboot
I originally had a stock sense M8 (bought it first day) but since October, I changed my phone to GPE (GPE Firmware and everything) and have been using 5.0 eversince using SkyDragon rom. Ran into issues a few weeks ago, and i've been waiting hard to go back to sense and use the newer 5.0 sense version.
However, today I ran into multiple issues, I thought installing the latest Sense Lollipop firmware and installing the latest ARHD 5.0 rom would do the trick, sadly that did not work.
I flashed the latest sense firmware and the ROM only for it to boot saying my Data is corrupt and i have to reset my phone, i say okay(was going to do that anyway) but then I access my recovery (TWRP) and my Internal storage/Cache/Data will not mount. I tried going back to GPE (atleast so my phone would work) but I cant do that either because even with the GPE firmware, the data partition wont mount and my internal storage shows 0 MB in TWRP, now im just stick in a bootloop/bricked device for hours. Any help would really be appreciated...thanks a lot.
Dev Edition RUU is what I would recommend. Partitioning is different on GPE versus Sense. So I'm guessing running the firmware only, since its not a complete image, did not change the partitioning back to the Sense partition scheme.
Converting from GPE back to Sense is not trivial, and not to be taken lightly. It seems like you tried to make up your own process instead of following any definitive guide or advice, which I do not recommend.
redpoint73 said:
Dev Edition RUU is what I would recommend. Partitioning is different on GPE versus Sense. So I'm guessing running the firmware only, since its not a complete image, did not change the partitioning back to the Sense partition scheme.
Converting from GPE back to Sense is not trivial, and not to be taken lightly. It seems like you tried to make up your own process instead of following any definitive guide or advice, which I do not recommend.
Click to expand...
Click to collapse
Thanks for your reply, to get this clear:
I should flash the Dev Edition RUU from (http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777) (3.28.1540.5) and then update the firmware to 4.16.1540.8 by just flashing that separate zip. However, if I flash the RUU wouldn't it relock my bootloader and put me on S-On and lose root and the custom recovery(Im terribly sorry if this sounds dumb, but my phone is soft bricked and I really need to get everything right this time), Is that the case if I flash the dev edition RUU? Thanks again.
Austin3161337 said:
However, if I flash the RUU wouldn't it relock my bootloader and put me on S-On and lose root and the custom recovery
Click to expand...
Click to collapse
No, RUU will not relock the bootloader. The only way the bootloader gets locked/unlocked is if you do so yourself.
Same with s-off, there is nothing that can change that aside from you making it s-on yourself.
Yes, you will lose custom recovery, as RUU will install stock recovery. So just flash stock recovery by fastboot after RUU. Then flash the ROM you want, which should already be rooted (so losing root is a moot point).
Official firmware.zip will also write stock recovery. So doing so would have caused the loss of TWRP anyway (unless it was a user modified firmware zip).
redpoint73 said:
No, RUU will not relock the bootloader. The only way the bootloader gets locked/unlocked is if you do so yourself.
Same with s-off, there is nothing that can change that aside from you making it s-on yourself.
Yes, you will lose custom recovery, as RUU will install stock recovery. So just flash stock recovery by fastboot after RUU. Then flash the ROM you want, which should already be rooted (so losing root is a moot point).
Official firmware.zip will also write stock recovery. So doing so would have caused the loss of TWRP anyway (unless it was a user modified firmware zip).
Click to expand...
Click to collapse
So I downloaded the RUU from (http://www.htc.com/us/support/htc-one-m8/news/) but its an .exe which requires me to plug my phone in which my computer cannot recognize because the phone won't boot at all, is there anyway I can install the RUU by not really needing to connect the phone to the computer? (Put the file in the external SD and install it via the bootloader maybe?) Any tips on that? Thanks
Austin3161337 said:
So I downloaded the RUU from (http://www.htc.com/us/support/htc-one-m8/news/) but its an .exe which requires me to plug my phone in which my computer cannot recognize because the phone won't boot at all
Click to expand...
Click to collapse
The phone doesn't need to boot into OS to run the RUU. It just needs to be able to get into bootloader/fastboot mode, which it can if the screen comes on.
If the device doesn't show on your PC, its a different issue. USB connectivity issue is almost always a driver issue. Install HTC Sync and HTC drivers, if you haven't already. Or uninstall and install them again.
I have a similiar issue. I had a tombile ruu.zip that a flashed as a 0P6Bimg.zip a kitkiat sense version for tmobile. Everything is cool and it runs fine. When I change cid and mid then flashed the sense lollipop firmware I lost my internal memory and twrp read storage as 0mb.
So idk
I flashed the Dev RUU as recommended by redpoint73, booted up and now it says that its updating to the latest firmware android 5.0 (OTA Update) However, I am going to install a custom recovery (TWRP) and put on ARHD instead, thanks for the help, and pretty much unbricking my device, lol.
Austin3161337 said:
I flashed the Dev RUU as recommended by redpoint73, booted up and now it says that its updating to the latest firmware android 5.0 (OTA Update) However, I am going to install a custom recovery (TWRP) and put on ARHD instead, thanks for the help, and pretty much unbricking my device, lol.
Click to expand...
Click to collapse
You're very welcome. Happy to help.
Did you have to do anything to get the RUU to run (like install drivers), or did you just end up running the RUU exe, and it worked?
redpoint73 said:
You're very welcome. Happy to help.
Did you have to do anything to get the RUU to run (like install drivers), or did you just end up running the RUU exe, and it worked?
Click to expand...
Click to collapse
I already had HTC Sync installed, had to boot into Fastboot USB for the thing to get recognized.
So I purchased the phone from somone, but the person who sold the phone to me also had a previous owner who rooted the phone and installed a rom. So as I deleted all the files for the person, something must have happened because ever since then, the wifi is not responding. It cannot search any routers nor does it turn on. So I am trying to return the phone to stock condition, but the process was a bit too hard for me to understand. Can someone explain it a bit easy for someone who does not know a lot about HTC devices and rooting?
So far, when I enter recovery mode, I get
Tampered Unlocked M8UL PVT SHIP S-OFF CID-HTC_622 HBOOT-3.16.0.0000 RADIO-1.16.21331831.A16G OpenDSP-v38.2.2-00542-M8974.0311 OS- eMMC-boot 2048MB May 20 2014
I think I wiped the recovery program(TWRP) or something because all I get is a red triangle with an exclamation point. I had done the getvar but I did not get any info in the main version part. So far I have installed the Maximus HD 9.0.0 rom. The radio is fine. Text, phone call, data all seems to work, but the only thing that is not working is the wifi. What steps should I take to return the phone to stock so that I don't have to worry about rooting and stock roms? As always, thanks for the feedback everybody! I had so much help from you guys!
chrislee0123 said:
So I purchased the phone from somone, but the person who sold the phone to me also had a previous owner who rooted the phone and installed a rom. So as I deleted all the files for the person, something must have happened because ever since then, the wifi is not responding. It cannot search any routers nor does it turn on. So I am trying to return the phone to stock condition, but the process was a bit too hard for me to understand. Can someone explain it a bit easy for someone who does not know a lot about HTC devices and rooting?
So far, when I enter recovery mode, I get
Tampered Unlocked M8UL PVT SHIP S-OFF CID-HTC_622 HBOOT-3.16.0.0000 RADIO-1.16.21331831.A16G OpenDSP-v38.2.2-00542-M8974.0311 OS- eMMC-boot 2048MB May 20 2014
I think I wiped the recovery program(TWRP) or something because all I get is a red triangle with an exclamation point. I had done the getvar but I did not get any info in the main version part. So far I have installed the Maximus HD 9.0.0 rom. The radio is fine. Text, phone call, data all seems to work, but the only thing that is not working is the wifi. What steps should I take to return the phone to stock so that I don't have to worry about rooting and stock roms? As always, thanks for the feedback everybody! I had so much help from you guys!
Click to expand...
Click to collapse
Your wifi isn't working because you are running a 4.4.4 ROM with 4.4.2 firmware. Look for a 4.4.2 based ROM, or update your firmware.
You can download the last(newest) 4.4.2 based Maximus HD ROM from here.
xunholyx said:
Your wifi isn't working because you are running a 4.4.4 ROM with 4.4.2 firmware. Look for a 4.4.2 based ROM, or update your firmware.
Click to expand...
Click to collapse
So is it possible to get a rom with a 4.4.2 and get an OTA from that ROM to a 4.4.4? Or does that not work. And also, I think I may have wiped the Recovery Program(TWRP?) and I think I need to install that again. Thanks for the help.
chrislee0123 said:
So is it possible to get a rom with a 4.4.2 and get an OTA from that ROM to a 4.4.4? Or does that not work. And also, I think I may have wiped the Recovery Program(TWRP?) and I think I need to install that again. Thanks for the help.
Click to expand...
Click to collapse
You will never get an OTA on a custom ROM. The problem is your model (Hong Kong). I'm not sure if you will be able to find stock backups or an RUU to return to stock to take the OTAs.
Hook up the phone to your PC, start up ADB/fastboot, and issue the command fastboot getvar all and post the readout here. I'll see if I can find something for you to return to stock. Edit out the serial no and IMEI from the readout for your own security.
xunholyx said:
You will never get an OTA on a custom ROM. The problem is your model (Hong Kong). I'm not sure if you will be able to find stock backups or an RUU to return to stock to take the OTAs.
Hook up the phone to your PC, start up ADB/fastboot, and issue the command fastboot getvar all and post the readout here. I'll see if I can find something for you to return to stock. Edit out the serial no and IMEI from the readout for your own security.
Click to expand...
Click to collapse
Thanks for the help, but the only problem that I have with the RUU and the stock backup is that I am confused on how to install them. Can you help me with distinguishing between them? I saw that when you want your m8 stock Google, you need to have some sort of Google RUU but that is as far as I know regarding RUU and Stock backups.
chrislee0123 said:
Thanks for the help, but the only problem that I have with the RUU and the stock backup is that I am confused on how to install them. Can you help me with distinguishing between them? I saw that when you want your m8 stock Google, you need to have some sort of Google RUU but that is as far as I know regarding RUU and Stock backups.
Click to expand...
Click to collapse
The RUUs aren't from Google, they are from HTC. I'm not sure if you'll find one for the Hong Kong model or not. The same applies for returning to stock using the stock ROM and recovery backups that are available here. You could also update your firmware manually since you are S-Off, but until I see a getvar, I can't point you in the right direction.
xunholyx said:
The RUUs aren't from Google, they are from HTC. I'm not sure if you'll find one for the Hong Kong model or not. The same applies for returning to stock using the stock ROM and recovery backups that are available here. You could also update your firmware manually since you are S-Off, but until I see a getvar, I can't point you in the right direction.
Click to expand...
Click to collapse
So this is what I have, do you need to know anything else? Thanks.
chrislee0123 said:
So this is what I have, do you need to know anything else? Thanks.
Click to expand...
Click to collapse
Okay. The link I provided in my last post has a stock backup for you. Choose the ones from CID HTC_622. You will need the one for 1.60.708.2 and the TWRP version for it installed in your phone. Put it into your backup folder and flash it. (full instructions are on that thread) Then you will need to flash the stock recovery from that thread. I couldn't find one to match. You might have to look elsewhere. You will be able to get the OTAs after that.
Or you could change to SuperCID (lots of instructions for that on XDA) and change your MID (Model ID, also lots of instructions here ~ change to 0P6B10000), then update manually with WWE firmware. You may be able to run WWE without changing your MID, but I can't confirm that. My MID is 0P6B12000, and I was able to flash international WWE firmware myself. Hope this helps.
xunholyx said:
Okay. The link I provided in my last post has a stock backup for you. Choose the ones from CID HTC_622. You will need the one for 1.60.708.2 and the TWRP version for it installed in your phone. Put it into your backup folder and flash it. (full instructions are on that thread) Then you will need to flash the stock recovery from that thread. I couldn't find one to match. You might have to look elsewhere. You will be able to get the OTAs after that.
Or you could change to SuperCID (lots of instructions for that on XDA) and change your MID (Model ID, also lots of instructions here ~ change to 0P6B10000), then update manually with WWE firmware. You may be able to run WWE without changing your MID, but I can't confirm that. My MID is 0P6B12000, and I was able to flash international WWE firmware myself. Hope this helps.
Click to expand...
Click to collapse
Can you provide a bit more clarification on the first option? Thanks!
chrislee0123 said:
Can you provide a bit more clarification on the first option? Thanks!
Click to expand...
Click to collapse
Sure. To go back to stock to get the OTAs, you need a stock ROM and stock recovery. I could find a stock ROM backup from that thread for your device, but not a stock recovery that matched. You will have to find that one on your own.
xunholyx said:
Sure. To go back to stock to get the OTAs, you need a stock ROM and stock recovery. I could find a stock ROM backup from that thread for your device, but not a stock recovery that matched. You will have to find that one on your own.
Click to expand...
Click to collapse
Thanks for the help! What stock recovery should I be specifically be looking for?
chrislee0123 said:
Thanks for the help! What stock recovery should I be specifically be looking for?
Click to expand...
Click to collapse
One that matches your firmware. It is explained in the link I provided
xunholyx said:
One that matches your firmware. It is explained in the link I provided
Click to expand...
Click to collapse
Hi! After some searching, I have found the file, but I am not really sure on what to do. The link that you provided me really did not explain a lot. I am a bit confused on the part where I got the zip, but don't know really what to do. I got the zip that you wanted me, the HTC 622 one with the 1.6.0XXX and you told me to put it in a recovery folder(?). Do I have to put it in there or is it something I can flash right off my sd card? Is the zip something that I put in the TWRP folder? I really tried to google it, but all I get is how I can use RUU on H BOOT to install TWRP or something. Thanks for the help.
Edit 1. Sorry, I forgot to mention the zip! The stock nandroid backups. I got that, but the recovery that you mentioned, I really got lost trying to look for it. Is it possible to just flash the nandroid backup without the boot loader locked but S-off with the TWRP and get the stock ROM?
chrislee0123 said:
Hi! After some searching, I have found the file, but I am not really sure on what to do. The link that you provided me really did not explain a lot. I am a bit confused on the part where I got the zip, but don't know really what to do. I got the zip that you wanted me, the HTC 622 one with the 1.6.0XXX and you told me to put it in a recovery folder(?). Do I have to put it in there or is it something I can flash right off my sd card? Is the zip something that I put in the TWRP folder? I really tried to google it, but all I get is how I can use RUU on H BOOT to install TWRP or something. Thanks for the help.
Edit 1. Sorry, I forgot to mention the zip! The stock nandroid backups. I got that, but the recovery that you mentioned, I really got lost trying to look for it. Is it possible to just flash the nandroid backup without the boot loader locked but S-off with the TWRP and get the stock ROM?
Click to expand...
Click to collapse
Okay. So I did a little research and came up with an official HTC RUU for your phone. As far as I know, it is the latest for the Hong Kong version (4.4.3). I say as far as I know because I don't deal with HK versions very often here.
Hook up to your PC and get into ADB/fastboot.
Download the official RUU from HTC's website by clicking here.
When the download is finished, double click it and choose run, (it's an .exe formatted file) then follow the prompts.
But please relize that running the RUU will WIPE EVERYTHING, so backup anything that you have that you don't want to lose.
xunholyx said:
Okay. So I did a little research and came up with an official HTC RUU for your phone. As far as I know, it is the latest for the Hong Kong version (4.4.3). I say as far as I know because I don't deal with HK versions very often here.
Hook up to your PC and get into ADB/fastboot.
Download the official RUU from HTC's website by clicking here.
When the download is finished, double click it and choose run, (it's an .exe formatted file) then follow the prompts.
But please relize that running the RUU will WIPE EVERYTHING, so backup anything that you have that you don't want to lose.
Click to expand...
Click to collapse
Thanks to your help, I have successfully returned to stock! Thank you for the kind and quick reply!
chrislee0123 said:
Thanks to your help, I have successfully returned to stock! Thank you for the kind and quick reply!
Click to expand...
Click to collapse
Cool. Glad to be of assistance.
Man is it good to be back to stock! Thanks again for the help!
chrislee0123 said:
Man is it good to be back to stock! Thanks again for the help!
Click to expand...
Click to collapse
There's a button for that thanks.
When I click on the link I get a .zip file with two .tar.gz files inside. No exe file. Am I missing something?
Hi people, this is my first time posting on a forum. I've always fixed my problem by googling them but now i failed.
I fixed the problem mentioned in the title and now i'm back to the original problem.
I followed a guide on the web to root my HTC 10. What i did was unlocking the bootloader and then flashing TWRP and till then things went good.
Then i tried to root it by flashing superSU and after that my phone went in bootloop and i found out i didnt have a system image anymore.
I tried to flash the RUU with my cid but i got the following error "RU_MAIN_VER_FAIL...".
This is my situation:
-i can access download, recovery and bootloader
-I've TWRP installed and my internal storage is blank, it only has an empty TWRP folder.
-My external memory has the following folders: Android, TWRP, .android_secure, LOST.DIR
What is my problem? I even tried to restore a TWRP backup without succeeding from https://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297
Please help me!!
rorou said:
Hi people, this is my first time posting on a forum. I've always fixed my problem by googling them but now i failed.
I fixed the problem mentioned in the title and now i'm back to the original problem.
I followed a guide on the web to root my HTC 10. What i did was unlocking the bootloader and then flashing TWRP and till then things went good.
Then i tried to root it by flashing superSU and after that my phone went in bootloop and i found out i didnt have a system image anymore.
I tried to flash the RUU with my cid but i got the following error "RU_MAIN_VER_FAIL...".
This is my situation:
-i can access download, recovery and bootloader
-I've TWRP installed and my internal storage is blank, it only has an empty TWRP folder.
-My external memory has the following folders: Android, TWRP, .android_secure, LOST.DIR
What is my problem? I even tried to restore a TWRP backup without succeeding from https://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297
Please help me!!
Click to expand...
Click to collapse
Grab an ruu that is at least at the same version you are, or flash a custom rom from twrp
Tarima said:
Grab an ruu that is at least at the same version you are, or flash a custom rom from twrp
Click to expand...
Click to collapse
thank you for your reply! i tried already a ruu solution with the version of my cid but it didnt workout. You're saying i need to install a custom rom and then revert back to stock?
rorou said:
thank you for your reply! i tried already a ruu solution with the version of my cid but it didnt workout. You're saying i need to install a custom rom and then revert back to stock?
Click to expand...
Click to collapse
No I meant you can flash a custom rom instead of stock. If you want stock you'll have to run a stock ruu. What's your current software number and which ruu are you trying to run?
Tarima said:
No I meant you can flash a custom rom instead of stock. If you want stock you'll have to run a stock ruu. What's your current software number and which ruu are you trying to run?
Click to expand...
Click to collapse
I've used this ruu 1.90.401.5 that has same mid and cid as my phone. And before wiping my internaL storage i had nougat, 7.0 i think. This ruu thing is really twisting my mind, never heard about it before today... maybe that's because i got in trouble. I've installed viper and the phone seems to work now but i have my doubts on whether to keep it or not. I'll try this so rom for a week, i want to see if it has battery or overheating issues.
But in case i wanted to go back to stock, i dont know what went wrong and why the ruu i've picked failed to install even if it had the same cid and mid.
rorou said:
I've used this ruu 1.90.401.5 that has same mid and cid as my phone. And before wiping my internaL storage i had nougat, 7.0 i think. This ruu thing is really twisting my mind, never heard about it before today... maybe that's because i got in trouble. I've installed viper and the phone seems to work now but i have my doubts on whether to keep it or not. I'll try this so rom for a week, i want to see if it has battery or overheating issues.
But in case i wanted to go back to stock, i dont know what went wrong and why the ruu i've picked failed to install even if it had the same cid and mid.
Click to expand...
Click to collapse
If you had Nougat before, that means your firmware version is 2.x.x.x. This is newer than the ruu you're trying to flash. You can only run an ruu that is at the same version as or above your current firmware version, and you cannot downgrade. That's what I mean by "run an ruu that's the same version as your phone."
Get your software info by doing fastboot getvar all from download mode. Then find an ruu that is for your CID/mid and at the same or higher version that you have. That'll take you to stock.
Tarima said:
If you had Nougat before, that means your firmware version is 2.x.x.x. This is newer than the ruu you're trying to flash. You can only run an ruu that is at the same version as or above your current firmware version, and you cannot downgrade. That's what I mean by "run an ruu that's the same version as your phone."
Get your software info by doing fastboot getvar all from download mode. Then find an ruu that is for your CID/mid and at the same or higher version that you have. That'll take you to stock.
Click to expand...
Click to collapse
That explains everything! thank you so much!!!