Related
I've seen on the gs3 forums so hacks to use NFC while the screen is off. Anybody know if we can get this going on the note 2?
Sent from my GT-N7105 using xda app-developers app
I found the thread for the Nexus, but cannot get confirmation that it would work with the GN2... This would be very helpful!
I tried the one that is floating around and it breaks NFC entirely. Had to restore the Nfc.apk that I saved.
I used the Xposed Framework mod to enable this and it works great. You can read about the Xposed framework mod here: http://forum.xda-developers.com/showthread.php?t=2067292. I got the NFC mod (as well as in call recording) from here: http://www.villainrom.co.uk/forum/forums/xposed_framework_mods/
I can also confirm that the DPI mods that are enabled by this work as well.
Hope this helps.
powerhome said:
I used the Xposed Framework mod to enable this and it works great. You can read about the Xposed framework mod here: http://forum.xda-developers.com/showthread.php?t=2067292. I got the NFC mod (as well as in call recording) from here: http://www.villainrom.co.uk/forum/forums/xposed_framework_mods/
I can also confirm that the DPI mods that are enabled by this work as well.
Hope this helps.
Click to expand...
Click to collapse
I already had Xposed installed. So I downloaded the module, installed it and activated it via Xposed and then rebooted. Nothing...
I have other modules that are working properly, so I know its not the XPosed application.
Any suggestions? Did you have to do anything additional?
After activating it in Xposed, I then had to open NFC LockScreen in the Apps drawer and select "screen is off". Closed, rebooted and then it worked for me.
*Edit:
I tested on my wife's phone and it doesnt work on hers. Im running cmenards N7105ZHALJ4 rom and my wife is running teshxx stock T889UVALK8 so it does appear to be somewhat rom dependent.
Im running the same ROM as your wife... Oh well...
powerhome said:
After activating it in Xposed, I then had to open NFC LockScreen in the Apps drawer and select "screen is off". Closed, rebooted and then it worked for me.
*Edit:
I tested on my wife's phone and it doesnt work on hers. Im running cmenards N7105ZHALJ4 rom and my wife is running teshxx stock T889UVALK8 so it does appear to be somewhat rom dependent.
Click to expand...
Click to collapse
Just for the hell of it I did a back up and wipe and installed the cmenards N7105ZHALJ4 ROM and I followed your instructions and it still did not work.
I am willing to pay a bounty to someone who can get this working. I am running the teshxx stock VALK8 ROM and simply want to be able to use the NFC feature while screen off and locked.
Hi guys! Let me introduce to you this awesome MOD:
Let's start underlining again (as clearly stated in topic title) that this is not my work - the developer of the xPosed framework is rovo89 so why don't you leave him a "thanks"? :laugh:
So, as making a duplicate would be useless I am not copying-pastying the original thread you can find HERE
By the way, I got the permission from rovo89 himself to mantain a S3 Mini dedicated thread for his MOD
PLEASE NOTICE - do not spam the official thread with bugreports, do it here instead. If you don't understand a step, you want more clarifications on how this framework is working, or a mod isn't working for you and so on, just leave a post here and I'll help you to get through your problems/curiosities
That said...
The xPosed framework itself only has the potential to mod your ROM. It doesn't include any extra feature, that you will get by installing additional modules, but we will talk about that later.
Features:
No need to modify system apks (so no unpacking,decompiling,recompiling,ect... very n00b friendly!)
Universal - it works on multiple devices and ROMs as it relies on proprietary framework
Changes are fully revertable by simply uninstalling the framework, so no need to reflash your ROM
Open source!
Instructions:
First of all you need to setup your framewok:
- Download the Xposed installer.from the original thread
- Install it on your phone
- Launch the Xposed Installer and click on "Install/Update"
- Reboot and you're done!
As I said before installing the framework only won't make any magic. To start modding your system you have to download some additional modules you can find here: http://www.villainrom.co.uk/forum/forums/xposed_framework_mods/ (a google search may reveal more modules repositories though )
The modules are in apk format, if you want to install them do this way:
- Download <module>.apk and install it
- Launch the Xposed Installer and go to the "Modules" tab
- Enable the module by checking the checkbox
- Reboot (sometimes soft reboot is enough) and you're done! :good:
Now lets talk about these modules. I have tried most of them before posting here to provide some useful hands-on feedback and here's what I suggest to install (100% working mods) on our S3 mini:
Dithered Holo Background
Email Text Colour
No increasing ringtone
Samsung Keyboard short delay
Xposed delivery notify toast
Xposed tweakbox (you'll find it on GSII forums - HERE )
Description of the mods: -more info on the repository page-
- Dithered Holo Background:
This mod fixes a minor annoyance in ICS/Jelly Bean that shows a slight color banding over Holo backgrounds.
- Email Text Colour:
Use this if you're using stock Samsung Email client - NOT THE ONE IN MY DMOD THAT'S INVERTED. As many of you could have noticed, stock email app isn't that readable. Why? Black backgrounds+greyish text. If you are not using my inverted email mod this could come in handy because changes the text colour from grey to a more white one
- No increasing ringtone:
Easy, this disables the default increasing ringtone and will play your ringtone at the same volume from the beginning to the end
- Samsung keyboard short delay:
If you, like me, don't like to use a third party keyboard this could be quite useful. If you've ever wondered about the possibility of reducing the long-press delay this is the answer, by reducing time from 500ms (that's just ridicolous) to 200ms.
- Xposed delivery notification toast:
If you're using delivery notifications (i find them veeery useful) you'll find this mod great. Samsung has a strange way of handling delivery reports, as a notification appears in the status bar and the SMS ringtone will be played. So it's not that different from a normal SMS... this will transform the notification into a little toast (just like superuser ones) and no sound will annoy you anymore
-Xposed tweakbox
A nice xposed module (with own GUI, like a standalone app), with a nice collection of graphical mods:
Statusbar mods - they work just fine!
CRT effect - does NOT work as it relies on a modded
Battery mods - working
Phone mods - working, call recording NOT tested
Miscellaneous - they work - SKIP TRACKS WITH VOLUME BUTTON INCLUDED!
So at the end of the day these are the major mods you can get with xposed, even on a stock ROM (if rooted):
- No SMS to MMS conversion
- No increasing ringtone
- Change default smilies
- Enable call recording (not tested yet)
- Launcher modifications
- Real SMS timestamps
- Per-app DPI and UI settings
and some other nice (but minor) mods/fixes
You can find credits in the original thread!
ok installed the wposed
now share a good module.. i cant understand the link...
sassonno1 said:
now share a good module.. i cant understand the link...
Click to expand...
Click to collapse
I don't understand.. I've stated which modules I suggest in my OP, and I said you can find them here: http://www.villainrom.co.uk/forum/forums/xposed_framework_mods/
got it?
AW: [FRAMEWORK][MOD] rovo89's xPosed Framework - ROM modding without modyfing APKs!
I have testet Transparent Status Bar and change color of clock
.....Works fine.
Test end.
Sent from my GT-I8190 using xda premium
Dont Work
Why that dont work by me? i have aktivate tweakbox.
AW: [FRAMEWORK][MOD] rovo89's xPosed Framework - ROM modding without modyfing APKs!
1. You must download and install XposedInstaller_2.1.3.apk
From link
2. Step Download and install XposedTweakbox_1.4.0.apk
3.Start xposed installer and klick install/update
4. Reboot you phone
5.open xposed installer again
6. Klick on Mudules and load/mark xposed Tweakbox
7.close
8.Open Tweakbox and make you choice
9.Reboot and have fun
PS. Transparent status bar looks bad with lookscreen
Sent from my GT-I8190 using xda premium
AW: [FRAMEWORK][MOD] rovo89's xPosed Framework - ROM modding without modyfing APKs!
I do that but nothing happen realy but thank you
Sent from my GT-I8190 using xda premium
giving this a shot, might work better for me considering my attempts to mess around with systemui are still failing
long story short
try try again
all part of learning how to mod stuff
Dario did you know if this module "Received SMSes' Sent Times in Details" use the right sms time like you standard rom V1?
R: [FRAMEWORK][MOD] rovo89's xPosed Framework - ROM modding without modyfing APKs!
devil-- said:
Dario did you know if this module "Received SMSes' Sent Times in Details" use the right sms time like you standard rom V1?
Click to expand...
Click to collapse
Yes, it's useless if you're using DMod
Sent from my GT-I8190N using xda app-developers app
dariolob said:
Yes, it's useless if you're using DMod
Click to expand...
Click to collapse
I ask because i think you must go on with your rom only for N version crying, I have standard one so I use right now Benz rom V4, I ask to Benz if can include this mod on the next update but of corse I just ask for it but if I can do it by this module I'm happy too
---------- Post added at 11:57 AM ---------- Previous post was at 11:09 AM ----------
installing the module, by xposed flag the module, reebot, tourn off the mobile and send sms with other mobile, after 10 minute i open mobile and.... not working... :crying:
And if someone, like me, had the problem with xposedbridge.jar not installing and failures like this:
Code:
[: not found
[: not found
mounting/system writable
[: not found
Created backup of
app_process executable at /
system/bin/app_process.orig
copying app_process...
[: not found
copying XposedBridge.jar...
cp:cant create '/data/xposed/XposedBridge.jar.newversion':
Path does not exist
then do read this and do exactly what is indicated. It all works like a charm afterr that. Click thanks there and not to me, as ante0 discovered it.
ps: never had a problem on my SGS II, its wife's SGS III Mini perking and acting I guess, even though it's well rooted and modified
it works i like it
Problem parsing package??
And is there a module to make center clock?
Sent from my GT-I8190 using xda app-developers app
your repo link is not working do you have any alternatives?
I found some on the forum http://forum.xda-developers.com/showthread.php?t=2327541 but couldn't find "No SMS to MMS conversion" and "Real SMS timestamps" that you talked about.
do you have any info on wanam xposed module? http://forum.xda-developers.com/showthread.php?t=2383484
it s for 4.2+ but i think maybe some of the functions can work on our device too. what do you think?
Greenify * ROOT *
Try the Greenify * ROOT *!
Wonderful tool!
Ice unwanted apps!
Save the battery and ram, etc.
MUST!
agree greenify is excellent
hi i'm worried about soft brick or boot loop. does it happen? please help i don't wanna brick my phone
It's OK to use
Sent from my GT-I8190 using XDA Free mobile app
Which xposed version should I flash for s3 mini lollipop?
Omni rom
Well I just updated to official kit kat 4.4.2 stock with root. I notice after I enable xposed wanam module the Samsung keyboard loses the auto replace function when u type in a misspelled word and it fixes it after u press the spacebar. There is no option in wanam to either enable or disable the function so I don't see how it affects it. However I know it is the problem because I've done clean install 3 times now and every time after I install xposed module the function is gone.
I had that too but didn't realize it was caused by the Wanam module. I just switched to the SwiftKey beta. It has better autocorrect, themeable keyboards, and a numbers row.
Sent from my SM-N900T using Tapatalk
pkimkpop said:
Well I just updated to official kit kat 4.4.2 stock with root. I notice after I enable xposed wanam module the Samsung keyboard loses the auto replace function when u type in a misspelled word and it fixes it after u press the spacebar. There is no option in wanam to either enable or disable the function so I don't see how it affects it. However I know it is the problem because I've done clean install 3 times now and every time after I install xposed module the function is gone.
Click to expand...
Click to collapse
Yeah I'm having the same issue. Did anyone find out how to fix it? It's irritating and my favorite Keyboard is the Samsung. I want that. I don't like SwiftKey.
It's annoying thing.
I have the same problem on 4.3
Also I don't get the question mark by long pressing the M letter.
not just in 4.4.2 also in 4.3 has issues
* Sorry no screenshots (Everyone knows what a TW based rom looks like)
This is a slim NG8 4.4.2 Rom with some S5 features baked in.
This is built super slim for good battery life and speed. (1.03 GB)
All Samsung bloat removed
All ATT bloat removed
S5 apps added
1. S5 Launcher
2. S5 Messeging
3. S5 Camera
4. S5 Gallery
5. S5 Files
6. S5 Contacts & Phone
7. S5 Modified White Keyboard
Full Screen Caller
NC1 Modem Baked in
Custom boot annimation
Wanwam Installer
Wanwam Exposed
Wanam Xposed features:
Call Recording
4 Ways Reboot (Reboot, Recovery, Hotboot, Download)
Full Color/Transparency customization for Status bar and Notification drawer elements
Secure Samsung Keyboard
Option to keep "Add Call" button with Call recording menu
Disable Camera shutter sound (+Screen Capture)
Flashlight trough volume button UP
Skip Music with Volume buttons
Save Call Logs View
Enable Keyboard Symbols
Enable Hangouts Calls trough cellular
Enable Camera while calling
Unlimited and Customizable Multi-View support
Bypass Exchange Lock check
Notification Panel Customization
Long Home key behavior
Long Back key to kill App (+ white list)
Disable increasing ringtone
Messaging Tweaks (raise limits and conversion)
Disable Scrolling cache
Enable Full rotations
White/Colored Circle Battery
Transparent Notifications panel
Customize Clock format and size
Customize Battery text helper size
Customize Quick Settings buttons number per row
Collapse Quick Settings after toggle
2 line formatted date on the panel header
Dark themed Multi-Window
Disable Boot sound
Customize Two line date header format
White/Black Email App background (Supported on some devices)
Transparent Quick Settings buttons background
Default hidden SMS logs
Add Call button to Logs and Contacts list
Disable Accounts icons on Contacts list
Custimize Wifi AP Clients number
Disable Launcher page rotation
Add Exit button to browser
SMS Automatic input mode
Disable Call number formatting
Enable unlimited Contacts joining
Enable Gallery Rotation trough button
Set default Browser view to Desktop
Hide Wireless charging popup
Hide Full Battery Notification
Clock position Status bar (Hide, Left, Right, Center)
NFC behaviors (UN/Locked on Screen ON/Off)
Hide Headset icon and notification bar
Disable TW DVFS
Enable TW DVFS Boost Benchmark mode
Hide Smart Stay, Alarm, NFC icons on status bar
Launcher: Enable Scroll wallpaper and Hide Dock labels
Disable Wake Home button
Use separate Address field on Contacts
Add Fast PIN unlock (to be used with caution)
Added SMS sent time details
Enable Screen ON options on Messaging App
Disable low Battery warning
Add custom carrier label on notification label
Set low Camera battery level
Change System Holo Dark/Light background
Acces hidden Lockscreen shortcuts menu
Disable SEAndroid/Knox notifications and container
Disable volume control sound
Disable low battery sound
Auto Disable Knox notifications when Knox Apps are installed
Set SELinux to Permissive mode on boot
ScreenShot and ScreenRecord (Requires Busybox) on Power menu (KitKat FWs only)
CM Numeric Circle battery (Kitkat Roms only)
Screen Off animation (CRT/Fade) (Kitkat Roms only)
Expand all notifications
Enable Heads up notifications (Optional ongoing notifications and display delay customization)
And much more to come
Install instructions,
1. Clean install only
2. Put rom on ext. sd card
3. Complete wipe
4. Install rom with safestrap
5. Flash your carriers kernal and modem (if your not a ATT NC1 user)
6. Flash Superuser
Let it settle for a couple minutes and set it up.
Download Links:
Rom:
https://www.androidfilehost.com/?fid=23622183712474633
SU:
https://www.androidfilehost.com/?fid=23622183712474628
Tried your rom, wifi doesn't work.
Flash NC1 module in recovery, wifi works now. There is a software upgrade notification, should I run it?
merikgvr4 said:
Tried your rom, wifi doesn't work.
Flash NC1 module in recovery, wifi works now. There is a software upgrade notification, should I run it?
Click to expand...
Click to collapse
modem baked in. You still need to flash the kernel modules for wifi. As far as the update you can run it and it will most likely fail. It's for Samsung update which we can't use anyway.
Seems dropbox has suspended my links because of too much traffic. I am reuploading it now to Mega
Panorama not working!
Panorama mode won't save the pics. =(
dsfletch said:
Seems dropbox has suspended my links because of too much traffic. I am reuploading it now to Mega
Click to expand...
Click to collapse
I like your rom it light to the touch and has brilliant battery..the only issue i have encountered so far is the camera the pictures come out hazzy and it freezes completely sometimes untill a reboot
Bundizle said:
I like your rom it light to the touch and has brilliant battery..the only issue i have encountered so far is the camera the pictures come out hazzy and it freezes completely sometimes untill a reboot
Click to expand...
Click to collapse
In the apps section I have I have the S5 camera. Maybe try reflashing it? I will try and make an S4 flashable camera.
dsfletch said:
In the apps section I have I have the S5 camera. Maybe try reflashing it? I will try and make an S4 flashable camera.
Click to expand...
Click to collapse
okay man and hats off your rom,it has some sence of aosp in it and the battery is incredible, it was my 1st tym to reach 5hrs sot in any rom. Good work mate. appreciate
Deleted
man i keep coming back to this rom..its that awesome...anny updates? please dont quit on us. panorama and a fc in settings in the call settings other than that perfect..mostly the battery life
dsfletch said:
modem baked in. You still need to flash the kernel modules for wifi. As far as the update you can run it and it will most likely fail. It's for Samsung update which we can't use anyway.
Click to expand...
Click to collapse
I feel I am missing a step somewhere. When I rooted, I used ODIN to flash the I337_NI1_Stock_Kernel after using Towelroot. I have Safestrap installed and had no problem getting F-Slim ROM loaded on the Stock slot. Are you saying I need to flash the NI1 wifi kernel module? Is this different than the kernel I mention above? If not, where do I get it from? (yes, I have searched) Once I have it, I would think I need to use ODIN again to flash the kernel, but when I tried booting into recovery using the hardbuttons, I just got a black screen and ODIN did not see my device connected. Again, what am I missing? Thanks for your help. I'm sure it is something simple, but a key piece none the less.
EDIT: immediately after posting this, I found the modem kernel thread here , but I would conclude this is not what you mean to flash to get WiFi working. Sorry I'm posting info that may not be related, I'm just trying to show I have done the searching, just havent found what I think I am looking for.
UPDATE:
Here is the post containing NI1 wifi kernel modules. I finally found it myself. I hope this helps others.
nouse41 said:
I feel I am missing a step somewhere. When I rooted, I used ODIN to flash the I337_NI1_Stock_Kernel after using Towelroot. I have Safestrap installed and had no problem getting F-Slim ROM loaded on the Stock slot. Are you saying I need to flash the NI1 wifi kernel module? Is this different than the kernel I mention above? If not, where do I get it from? (yes, I have searched) Once I have it, I would think I need to use ODIN again to flash the kernel, but when I tried booting into recovery using the hardbuttons, I just got a black screen and ODIN did not see my device connected. Again, what am I missing? Thanks for your help. I'm sure it is something simple, but a key piece none the less.
EDIT: immediately after posting this, I found the modem kernel thread here , but I would conclude this is not what you mean to flash to get WiFi working. Sorry I'm posting info that may not be related, I'm just trying to show I have done the searching, just havent found what I think I am looking for.
UPDATE:
Here is the post containing NI1 wifi kernel modules. I finally found it myself. I hope this helps others.
Click to expand...
Click to collapse
I'm very sorry but my s4 is broken at the moment. I broke the lcd and haven't been on here in quite a bit. I'm glad you found what you were looking for though. When my phone is repaired I'll be back
Zero errors or FCs
Thx for this ROM! Successful install . Smooth ROM, Zero errors or FCs :good:
I LOVE THIS ROM!! Hats off to you for this. Only problem I am having is getting my wifi/tether working, but I'm sure I'll figure it out. Thanks again! This is S4 Gold!
merikgvr4 said:
Tried your rom, wifi doesn't work.
Flash NC1 module in recovery, wifi works now. There is a software upgrade notification, should I run it?
Click to expand...
Click to collapse
Do you have a download link to the NC1 module you flashed in recovery or in odin?
Is it a kernel?
I tried flashing the NC1 stock kernel in odin but wifi still will not work.
Is there a download link to a wifi fix for this rom?
Non of these here work
im on NC1
Note:
This rom is based on the Samsung 4.4.2 and won't contain heavy mods or themes, install what you want.
I'm not a developer and not pretending to be one, I'm a android enthusiast.
Take it as it is and don't complain as this is free.
No requests.
Thanks to
amarullz for Aroma installer
Chainfire for the SUperSU app
rovo89 for the xposed framework
zhuhang for Viper4Android and for the IRS starter pack
alexndr for SU installer script new updater-script
gharrington for3Minit battery & 3Minit Quicklaunch panel
.........Sorry if I forget someone please contact me and I will add you with pleasure.........
Installation:
KNOX counter will be tripped to 1 as you need to be on TWRP to install this
Make a EFS backup
Make a backup
Download rom and place on your device.
First time you install this full wipe.
I'm giving Android.Ninja full control over this thread.
He will be answering questions and helping you out. Don't pm me , Android.Ninja will decide if it is important enough to pm me. And if so he will contact me. He can edit the OP and I will let him as he got more experience then me about development and problem tracking.
Do what he ask, be polite and be patient. We do this as a hobby and we do have a life.
SM-P900
Based on KOT49H.P900XXUANK2
Android Host File
CivZ-P900-XXUANK2-Rev1.4_signed.zip & older
Mega File
CivZ-P900-XXUANK2-Rev1.4_signed.zip & older
md5 checksum: 9B80F3148665FDCC30834733670FBE7A *CivZ-P900-XXUANK2-Rev1.4_signed.zip
FLASH UPDATE PATCH TO REV1.5
Install with custom recovery!
Update_Patch_To_Rev1.5.zip
LATEST CIVZ-P900 KERNEL-REV...
See here for the latest Custom Kernel ( Rev3.2 included in Rom Rev1.3) and full details.
Available regions in aroma:
(You want more regions? Then you provide me your CSC)
"BTU", "UNITED KINGDOM"
"DBT", "GERMANY"
"ITV", "ITALY",
"LUX", "LUXEMBURG"
"PHN", "NETHERLANDS"
"XAC", "CANANDA"
"XAR", "USA"
"XEF", "FRANCE"
"XEO", "POLAND"
Aroma installation options:
"Bloomberg"
"Genie" "Google weather and news"
"Scloud"
"Evernote"
"MobilePrint"
"LiveWallpapers"
"CiscoMeeting"
"Pen Up"
"S-Tab launcher" "This replaces stock Note pro launcher"
"PaperArtist" "Note 8.0 Drawing app"
"PhotoShop" "Samsung provided in Note10.1"
ROM FEATURES
[*]Custom Kernel CivZ-P900-Rev3.2
[*]Re-Odex script
[*]KNOX removed
[*]3Minit Battery Mod @ gharrington.
[*]3Minit Quicklaunch Panel @ gharrington. modded by me for better layout.
[*]3-Way-reboot = Reboot/Softreboot/Recovery
[*]ExternalSD card R/W fixed
[*]Deodexed & zipaligned
[*]Busybox 1.22.0 included
[*]New SuperUser 2.13 included
[*]SpenWindow manager & MultiWindow manager included (Select what apps are visible in pen drawer & Multiwindow drawer)
[*]Xposed framework
[*]ViperFX supported and included (modded build.prop) Updates follow this thread.
[*] init.d support with the custom kernel that is included
[*]Xad & YouTube AdAway xposed modules
[*]CSC hidden features enabled: Camera sound; Key_symbols;........
[*]Apps & Libs updated and google apps placed in data to keep a clean system all the time.
[*]Aroma installation to pick the apps you want and the region you need.[*]updater script with correct symlinks (wifi) for 100% stability.
[*]Extra control settings in the rom menu (Apps are not shown in the app drawer) (see screenshots)
*MultiWindow app manager (Thanks to Xperiacle)
*Pen Window Manager (Thanks to Xperiacle)
*3Minit battery icons manager
*Ad blocker
*Xposed Framework
*SuperSu root manager (This is also visible in the app drawer)
[*]Added native AC3 audio support
[*]etc.........
Changelog ROM:
14/10/2014: First release Rev1.0
24/10/2014 Rev1.1 Released
Updated app
Updated libs
Polaris removed =lib not supported , download from the playstore.
Custom Kernel CivZ-P900
26/10/2014 Rev1.2 Released
Updated app & libs
Splanner widget modded to support all launchers and not only MagazineLauncher
RE-Odex script added (thanks to MatrixDJ96), smoothness off stock rom , re-odex your rom after installation with the simple command in terminal emulator : su (enter) odex (enter) all (enter)
Custom Kernel CivZ-P900-Rev2.3
16/12/2014 Rev1.3 Released
Updated app & libs
Based on the new release XXUANK2
Custom Kernel CivZ-P900-Rev3.2 included
07/01/2015 Rev1.4 Released
Extra control settings in the rom menu (Apps are not shown in the app drawer) (see screenshots)
*MultiWindow app manager (Thanks to Xperiacle)
*Pen Window Manager (Thanks to Xperiacle)
*3Minit battery icons manager
*Ad blocker
*Xposed Framework
*SuperSu root manager (This is also visible in the app drawer)
Added native AC3 audio support
11/01/2015 Update PatchRev1.5 Released
Small 40MB patch to update to Rev1.5 and fix the system settings bug = see here what the bug is
Planning to use anything of this rom, like my modded apps/framework, please give proper credit
P900 STOCK Kernel download folder
If this was a helpfull post hit thanks!
XDA:DevDB Information
CivZ-P900, ROM for the Samsung Galaxy Note Pro 12.2
Contributors
civato, Android.Ninja
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2014-10-15
Last Updated 2015-01-11
Reserved
Q&A: (Questions and answers that are help full will be posted here)
Overclocking and undervolting can cause instability.
Re-Odex Script:
simple command in terminal emulator : su (enter) odex (enter) all (enter)
Some screens of the Synapse:
Hey Civ! Android.Ninja here! Good to see you put out a ROM for the Note Pro 12.2
Sent from my SM-P900 using Tapatalk
Installed yesterday morning and all is working well so far.
Sent from my VS985 4G using XDA Premium HD app
Hello guys! Thanks u so much for the ROM is AWESOME
But i have a problem, with samsung stock based roms, when i use S-pen, the physical buttons dont works, so if i hold accidentaly recents or back button while im writing the buttons dont works, What can i do to disable while im writing like in samsung stock? It is possible? Its importante for me becausei use this tablet for taking notes at university
Thanks 4 all guys :good::good::good::good:
Hi all ,can anyone provide me paperartist.Apk. please.
Thanks,
Best Regards
Jhon
itsme_4ucz said:
Hi all ,can anyone provide me paperartist.Apk. please.
Thanks,
Best Regards
Jhon
Click to expand...
Click to collapse
Can u add selinux kernel?
The OP says no requests. Great rom.
Thank you so much
Thank you @civato !!! thank you so much for cooking this rom.
I was so disapointed first times that this powerful high end tablet never reach its potential. And missing developpend.. I was planing to sell but there is no altertane powerful than this one really.
So I decided to wait until it gets android 5... hoping there will be a good firmware by samsung with renewing all apps.
after losing hopes of development I wasnt even looking this forums for months.. today it was all randomly...
I will install the rom this wekkend. !
Aurondios said:
Can u add selinux kernel?
Click to expand...
Click to collapse
The stock kernel is a Selinux kernel
#################################################################################
m_carleone82 said:
Thank you @civato !!! thank you so much for cooking this rom.
I was so disapointed first times that this powerful high end tablet never reach its potential. And missing developpend.. I was planing to sell but there is no altertane powerful than this one really.
So I decided to wait until it gets android 5... hoping there will be a good firmware by samsung with renewing all apps.
after losing hopes of development I wasnt even looking this forums for months.. today it was all randomly...
I will install the rom this wekkend. !
Click to expand...
Click to collapse
I waited for the price to drop, In the beginning it was up 750 Euro , now it dropped to 438 Euro.
#########################################################################################
Info:
Update rom coming :
Small changes in SystemUI
Added some Xposed modules that I use (tested and working)
Note4 Wallpapers added in Xperia wallpaper picker (Only for main screen)
Init.d script "zipalign on every boot added"
New Custom kernel CivZ-P900 with lots of tweak options...... Everything related to Knox removed (SecureStorage, Containers)
Release?... This weekend or the following week.
And I don't take requests as this is what I use and I share it.
I only put in what I will use.
Tried to setup Viper Android but the driver install failed, saying that the busybox version installed is broken. Installed Stericsons but the driver still won't install. Any ideas to get it to work?
dodo99x said:
Tried to setup Viper Android but the driver install failed, saying that the busybox version installed is broken. Installed Stericsons but the driver still won't install. Any ideas to get it to work?
Click to expand...
Click to collapse
No problems here, try reinstalling the rom, no need for a full wipe.
That fixed her. Merci
Question
Hi, thank you for posting the rom, and your hard work, I tried to install it several times, I do a full wipe before installing, after it finishes I restart and it just come back to recovery every time, Any suggestions? I would appreciate your help. Thanks
Go into Advanced Wipe, wipe Cache, Data, System, Dalvik. Install rom again. If you still get a boot loop, start over from scratch by flashing back to stock via Odin, flash TWRP, then try to flash the rom again.
Thanks, the first link to download the rom is imcomplete or corrupted, i downloaded the rom again from the 3 link and its working like a char , thank you again, I also noticed the S tab launcher doesnt install atall regardless, Any idea about that one?
awsome rom
Awsome rom first time instal and it works like a charm with the aroma installer
Keep up the good work
Thank you so much
Thank you so much!!. Everything works like charming...
Sooner I will try this with muti boot.
It is surprise to see you again Civato, I am still using your rom with my iconia a500 It is good that you are cooking rom for this. Too bad mine is P901 Is there any chance?
Sent from my SM-G900F using XDA Free mobile app
New rom release with custom kernel
New rom with the following kernel included, please give me some time to setup github. I'm working on it.
Download in OP
KERNEL FEATURES source
[*]KNOX removed (container service, SecureStorage)
[*]SELINUX protection included but set at Permissive = No problems wit apps like Paragon and Titainium.
[*]INIT.D Support
[*]FRANDOM
[*]ARCH Enabled
[*]NEON @ Faux123
[*]DYNAMIC FSYNC & A_SYNC @ Faux123
[*]BATTERY CONTROL @ Andreilux
[*]POWERSUSPEND @ Faux123 & Yank555.lu
[*]SPen BOOSTER CONTROL @ bonuzzz
[*]INTERNAL & MEMORY VOLTAGE CONTROL @ Andreilux & halaszk
[*]MEMORY Frequency up to 933MHz
[*]OVERCLOCKING & VOLTAGE CONTROL CPU & GPU @ Andreilux & halaszk (CPU:200MHz up to 21000MHz / GPU:100MHz up to 667MHz)
[*]BFQ SCHEDULER ADDED
[*]INTERACTIVE GOVERNOR TWEAK
[*]WOLFSON DAC SOUND CONTROL ( Speaker and Headphone equalizer) @ Andreilux & oloendithias
[*]DIRTY WRITEBACK & DYNAMIC READ AHEAD
[*]INTELLI HOTPLUG & SAMSUNG DYNAMIC HOTPLUG CONTROL @ Faux123 & oloendithas
[*]EXTRA TCP WIFI CONNECTION OPTIONS
[*]NTFS READ WRITE SUPPORT (with paragon)
[*]MODULES LOADABLE
[*]SWAP/CLEANCACHE/FRONTSWAP
[*]MAC80211
[*]CIFS
[*]CAIF
[*]EEPROM 93CX6
[*]RTL8187
[*]RT2X00/RT2800USB
[*]OTG
[*]COMPILED WITH GCC 4.7.4 (standard, not using the optimized for A15 toolchain as there are also A7 cores)
[*]XZ COMPRESSED
[*]FULL CONTROL WITH SYNAPSE APP (Thanks to Andreilux for the app and UpInTheAir for most of the layout)
etc.........