First im not good speaking english, im Dominican and i dont know a lot of vocabulary, so i apologize if I confuse you a bit.
Ok,
some days a go i tried to install a custom software to my Kindle Fire 1st generation, i could root my kindle with a app, but when i tried to install the TWRP, the fire fire fire and the Recovery with the CMD or Command Pront i get a little lose, i mean, i did everything that said in one tutorial that i was reading, but when i finish i had to put on my CMD "adb reboot" to end the process, ok i did it and my kindle doesnt reboot,the kindle do nothing.
i mean the screen doesnt turn on, indicating that it was restarting, it kept in black and the power button was in green, i wait until 5 minutes and i push the power button to verify my kindle but it didnt respond, so i hold the button trying to turn on and nothing so, now my kindle doesnt turn on, even when i put my power cable to charge it doesnt do anything i mean the power button doesnt get green or orange and my computer doesnt recognize my kindle...
i think that this is the mother of the brick, if this can be named "BRICK". so if someone can help me I would appreciate...
Note: if i get you lose pls ask me i will answer right away... THANKS.
Related
Back story: I purchased a used Kindle Fire on Ebay about a week ago, not knowing that it had been rooted. I was looking for a standard Kindle fire for my son so he would stop using my tablet (lol) and the parental controls are better and more books and so on... none the less when I got it I noticed that it booted differently (I had a kindle fire prior) and it booted into Android. I have had problems with trying to be able to get my computer to recognize it. It looks for missing drivers and I have been all frustrated, but figured that we would just have to download off of it, well, we went on a trip this past weekend (11 hours) and my son wanted to watch a movie, turned it on and it wont boot past the yellow triangle now. I have tried a hard reboot, I have tried to turn it on and hold it and watch for the orange light to no avail. The light is either green or its powered off.
I don know what to do at this point? I cant hook it to my computer (wont even recognize as an F drive or mass media) and I cant boot past the orange triangle. Yes, I am a newb (apologies) but a very frustrated one if that counts?
Sadly I think the thing is bricked and I will take a $150 hit (ugh)
No worries, your Kindle isn't bricked, it's just stuck in the wrong bootmode, which is easy to fix if you know what you are doing.
I could give you links to various guides and tutorials but it seems that it would be a lot to handle all at once for someone who knows nothing about Android and probably has no intention to.
Changing bootmodes is very easy, but getting everything set up to change bootmodes can be tricky, especially on Windows. It seems to me that you want the device back to stock (not rooted, stock bootloader, etc.), which may be a little less troublesome for you in the long run.
Hold the power button for 10-15 seconds to ensure it is completely powered off, then turn it on again.
When you see the yellow triangle, hold the power button until it turns orange and release. That should get you into the custom recovery that has been installed. When it boots into that recovery, describe what you see (i.e. recovery version, color scheme, etc.)
Yes, you would be correct in that I just want it stock, sure Android is great but my son is 4 and he just needs the basics for his books and angry birds lol. So, I attempted what you said, powered off all of the way and turned back on, as soon as I see the yellow triangle I hold the button and it wont turn orange, it will just power back off. I used to be able to touch the screen when the yellow triangle came up and it would take me into some menu (TWRP?) but it wont do that anymore either, its just remains either off or on the yellow triangle.
soupmagnet said:
No worries, your Kindle isn't bricked, it's just stuck in the wrong bootmode, which is easy to fix if you know what you are doing.
I could give you links to various guides and tutorials but it seems that it would be a lot to handle all at once for someone who knows nothing about Android and probably has no intention to.
Changing bootmodes is very easy, but getting everything set up to change bootmodes can be tricky, especially on Windows. It seems to me that you want the device back to stock (not rooted, stock bootloader, etc.), which may be a little less troublesome for you in the long run.
Hold the power button for 10-15 seconds to ensure it is completely powered off, then turn it on again.
When you see the yellow triangle, hold the power button until it turns orange and release. That should get you into the custom recovery that has been installed. When it boots into that recovery, describe what you see (i.e. recovery version, color scheme, etc.)
Click to expand...
Click to collapse
Well you're going to need a few things first.
The Kindle Fire Software Update
The Kindle Fire Utility
And you need to get a custom recovery. TWRP is kind of on the fritz right now so getting it from the TWRP website is probably not your best option. You can still find a working one with the smirkit but you'll have to extract it yourself. It will be titled "recovery_twrp_2.x.img". COTR will work just as well but be sure you get the .img
Extract the KFU and run the install_drivers.bat
Place your custom recovery.img in the Kindle Fire Utilitiy's " tools" folder
Shift + Right-click on the Kindle Fire Utilitiy's "tools" and select "Open command window here". In the window that opens up enter the following commands:
Code:
fastboot flash recovery name_of_recovery.img
fastboot oem idme bootmode 5001
fastboot reboot
I'll leave it at that until you can confirm you have recovery installed and you're booted into it.
I would if I could... lol... I can not get my computer to recognize the Kindle as either a kindle or a mass media drive... when I plug it in it will say that I need kindle drivers (which I am told there is no such thing as) and it does not show up as a drive either. I am to the point that I am about ready to throw it on craigslist for 50 bucks, take the 100 plus loss and start all over with a brand new one... damn you ebay! Lol
soupmagnet said:
Well you're going to need a few things first.
The Kindle Fire Software Update
The Kindle Fire Utility
And you need to get a custom recovery. TWRP is kind of on the fritz right now so getting it from the TWRP website is probably not your best option. You can still find a working one with the smirkit but you'll have to extract it yourself. It will be titled "recovery_twrp_2.x.img". COTR will work just as well but be sure you get the .img
Extract the KFU and run the install_drivers.bat
Place your custom recovery.img in the Kindle Fire Utilitiy's " tools" folder
Shift + Right-click on the Kindle Fire Utilitiy's "tools" and select "Open command window here". In the window that opens up enter the following commands:
Code:
fastboot flash recovery name_of_recovery.img
fastboot oem idme bootmode 5001
fastboot reboot
I'll leave it at that until you can confirm you have recovery installed and you're booted into it.
Click to expand...
Click to collapse
Save yourself the trouble mail it to me I will fix it then you reimburse me the return postage or better yet I can show you how to fix it without even mailing it . 150 for a first gen kindle is pretty high you kinda already got taken.
[email protected] said:
I would if I could... lol... I can not get my computer to recognize the Kindle as either a kindle or a mass media drive... when I plug it in it will say that I need kindle drivers (which I am told there is no such thing as) and it does not show up as a drive either. I am to the point that I am about ready to throw it on craigslist for 50 bucks, take the 100 plus loss and start all over with a brand new one... damn you ebay! Lol
Click to expand...
Click to collapse
Pay attention to what I said previously...
soupmagnet said:
Extract the KFU and run the install_drivers.bat
Click to expand...
Click to collapse
Clearly, there are drivers for the Kindle Fire and they are needed to fix your device.
I think I am officially over this thing... I downloaded the drivers and went to plug in the kindle fire to the computer and now its just looping the triangle... it turns on for a second and then off and on and off and so on... UGHHHHHH....
soupmagnet said:
Pay attention to what I said previously...
Clearly, there are drivers for the Kindle Fire and they are needed to fix your device.
Click to expand...
Click to collapse
You let the battery die. I won't go into how it happened but to get it to charge, you need to...
With the device turned off, Plug the device into USB and hold the power button until it shuts off again. If you can get it to stay off, leave it plugged in for about half a day and turn it on again.
SO recently i tried to root my kindle using one of the guides unfortunately i somehow messed up during it or something, but the problem i have now is whenever i turn my kindle on it has the yellow triangle with a fire logo in it and at the bottom it says "press power button for recovery". Simple enough only the second problem is i do not have TWRP or anything like that so pressing the power button literally does nothing. Unfortunately as well when i plug it into the USB it will identify that something is connected but it won't install it to the pc because it cant find some hardware or something. So i cant get it to start up or connect it to the pc and am desperately looking for a solution. Thanks to anyone who can help.
First off. Do you have a first gen kindle fire?
6.3.x or 10.x.x?
If you have a first gen,
Download this.
http://forum.xda-developers.com/showthread.php?t=2192818
Choose bootmode menu, and choose fastboot.
Hold down the power button for 10-20 seconds till it turns off.
Connect your kindle to your computer.
Does KFU find the device? If so, good. You will be taken to the main screen at that point I think.
Choose to install recovery (TWRP).
That should be it. Post here if there's any problems.
Sent from my muffin-ated Kindle Fire with Tapatalk HD.
Just because I am a Senior Member doesn't mean anything.
I do not count myself any higher than anybody else.
jma9454 said:
First off. Do you have a first gen kindle fire?
6.3.x or 10.x.x?
If you have a first gen,
Download this.
http://forum.xda-developers.com/showthread.php?t=2192818
Choose bootmode menu, and choose fastboot.
Hold down the power button for 10-20 seconds till it turns off.
Connect your kindle to your computer.
Does KFU find the device? If so, good. You will be taken to the main screen at that point I think.
Choose to install recovery (TWRP).
That should be it. Post here if there's any problems.
Sent from my muffin-ated Kindle Fire with Tapatalk HD.
Just because I am a Senior Member doesn't mean anything.
I do not count myself any higher than anybody else.
Click to expand...
Click to collapse
Attached is a picture of what my kindle screen looks like. I tried resetting it, plugging it into the computer, etc. but this screen never changes. Also on my pc it doesn't recognize it as a kindle, it recognizes it as an unknown device. So I can't put any files onto my kindle at the moment because my PC keeps telling my me driver is not working or something. I attached files showing what my pc says as well. Also I apologize for the bad quality of the pictures i don't own a very nice camera at all so I apologize in advanced for that. The last 3 are readable the 1st one is basically just a yellow triangle with a fire symbol in the middle and it says "press power button for recovery" but nothing happens when i press the power button, and the 2 photo is a little bit blurry but all it says is:
Unknown Device
Device Type: Universal Serial Bus controllers
Manufacturers: (Standard USB Host Controller)
Location: Port_#0009.Hub_#0002
Device Status:
Windows has stopped this device because it has reported problems. (Code 43)
The "press power button for recovery" can be confusing if you don't know what's going on. That version of FireFireFire sits in fastboot mode for...I think...8 seconds before it will recognize the power button. You can repeatedly press the power button until the LED turns orange to see if that gets you into recovery. If not, you're probably looking at something like usbboot to replace your bootloader. You need to replace your bootloader anyway, but hopefully you'll be able to flash a new one in recovery instead.
soupmagnet said:
The "press power button for recovery" can be confusing if you don't know what's going on. That version of FireFireFire sits in fastboot mode for...I think...8 seconds before it will recognize the power button. You can repeatedly press the power button until the LED turns orange to see if that gets you into recovery. If not, you're probably looking at something like usbboot to replace your bootloader. You need to replace your bootloader anyway, but hopefully you'll be able to flash a new one in recovery instead.
Click to expand...
Click to collapse
Repeatedly pressed the power button for about 30 seconds with the same result, green light still, and no screen change. So it looks like its this usbboot, how would i go about doing this in order to replace my bootloader?
KindleFail said:
Repeatedly pressed the power button for about 30 seconds with the same result, green light still, and no screen change. So it looks like its this usbboot, how would i go about doing this in order to replace my bootloader?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1405052
http://forum.xda-developers.com/showthread.php?t=1430038&highlight=firekit
Since you will need Linux anyway, you might as well download and install SoupKit. It comes with Firekit and will probably make your life easier in the long run.
What guide did you use exactly? I can see if we can update that guide to use the latest FFF because that is a very old alpha version that has had many issues with the yellow triangle in the past. I'm surprised its still floating around here.
Sent from my One V using xda app-developers app
Stuck at boot logo
Hey all,
I'm not sure if this is the correct place to post but I didn't want to make a new topic and this seems to be in the area of what is wrong with my kindle... I tried the new KFU v0.9.9 on my first gen KF running 6.3.2. I have rooted it before (not on 6.3.2), but unrooted and restored to factory settings because I thought I was going to sell it. However, the plans fell through and I am keeping it so I wanted to re-root and all that jazz....
My question is, how do I get it boot past the boot logo? I used the KFU, but firstly when it prompts it says:
'findstr' is not recognized as an internal or external command, operable program or batch file.
So none of the commands pop up, however they are still there... For example, i followed:
"Choose bootmode menu, and choose fastboot.
Hold down the power button for 10-20 seconds till it turns off.
Connect your kindle to your computer."
And I can get to fastboot, but it says there is no device connected to my computer. If you need more details on the problem I'll be glad to give them to you. Hopefully someone checks this thread again
Thanks
What version of Windows do you have that doesn't have 'findstr'?
What do you see in your device manager while the device is plugged in?
soupmagnet said:
What version of Windows do you have that doesn't have 'findstr'?
What do you see in your device manager while the device is plugged in?
Click to expand...
Click to collapse
I'm running a 64 bit version of Windows 7 professional.
There's nothing in the device manager when I plug it in.
I can not get my wife's fire HD 8.9 to boot. When I turn it on the Kindle Fire screen appears for about 5 seconds, then the Kindle Fire goes out, but the screen is still backlit.
This device is completely stock with no modifications. It did this when I turned it on one day, no previous problems.
I tried holding the power button down for up to 2 min. After I hold the button for 10 seconds the backlight goes out and the kindle is completely off. I tried letting the battery go completely dead, then charging it for several hours with no change. I tried running fastboot, but it is stuck at <waiting for device>. My computer does not see it at all. I do hear the chime that something was plugged into the computer immediately followed by the chime that it was disconnected, but nothing shows up in my computer at all.
Is there any hope for this Kindle, or is it bricked for good?
So I assume you're on windows. That beeb you hear is the fastboot mode you need to load drivers really quickly during that beeb. At that point fastboot shoukd work and you can issue a command to get into the factory restore.
I got it working again.
The problem was simple, I did not have any drivers installed on my computer for the kindle (I have never plugged it into this computer before it would not boot). I found the drivers to download here: http://forum.xda-developers.com/showthread.php?t=1890413
I was then able to get it into fastboot and recover it with instructions from this thread: http://forum.xda-developers.com/showthread.php?t=2011126
This is the face that you're making if you're gonna reply
So...
What happened was that a while back, I accidentally flashed a bootloader for the original kindle fire. Then I rebooted. The screen went blank and then I couldn't turn it on, even with a fastboot cable. Anyone have any suggestions[insert question mark here because my shift key is broken.] Oh, and i need one that doen't require opening up the kindle.
I have
kindle fire 2
fastboot cable
a working pc
windows
ubuntu
Thx for any help.
Hi, did you end up finding anything? I'm sitting here with an opened KF2 with what seems like no bootloader, no system, nothing. Trying to figure out how to go about the shorting method.
Ok so really need some help as I’m on the verge of giving up!! I don’t know anything about what you guys are doing!! My kindle fire 8.9 just decided to go ‘red screen’ on me when I turned it on one day. I hadn’t done anything to it to try to mod it or anything- it just turned on and went straight to the red screen and that’s all it’s done since. I’ve tried disconnecting the battery for a while and then reconnecting - no joy. I’ve followed tutorials here to try to reset it via fastboot but have got stuck where it says ‘waiting for device’ - I plug it in and turn it on but it doesn’t find it and nothing happens. I don’t know how to get it into fast boot mode any other way and don’t have any other ideas for things to try so any help would be really great or I’m just going to have to chuck it out?.
I got it into fastboot earlier without the special fastboot cable. I had lubutu running on a memory stick. I installed the adb and fastboot stuff. The first time it wouldn't say "waiting on device" or whatever but the second time before installing the adb and fastboot stuff I changed the settings so it was normal releases and unsupported sources or whatever so it'd draw from a bigger pool. Then the waiting on device part showed up. I plugged a normal cable in and was turning it on and off and all that. But what made it go into fastboot mode was having it plugged in then holding power button to turn it off then I pressed and held down the power button and I think it's the volume down button (the one closest to power) then it loaded into fastboot ^_^. I'm gonna try to actually fix it now.