Hi, This afternoon I tried to Re-root my galaxy s3 in 4.3. I did not know about "Knox," and tried to root anyways. Now, my phone just says: Firmware upgrade encountered an issue. Please select recovery mode in kies & try again. Im not all skilled with the techno magic and stuff, so please respond with help with a "to help a stupid person" response. I really need help! Also, it says Odin Mode in red in the corners , with this below it.
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: YES (2 COUNTS)
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
QUALCOME SECUREBOOT: ENABLE
WARRENTY BIT: 0
BOOTLOADER AP SWREV: 2
Please help, I will do anything! :crying::crying:
Hi guys, I'll admit I'm a noob, but I'm trying my best to understand the ins and outs of flashing ROMs. I recently purchased a used S4 SGH-M919. The problem is the phone has i337 AT&T firmware on it. (I'm pretty sure it's a stock ROM and not rooted). I need to find a way to use the Tmobile network on this phone, so I have been trying revert to stock by flashing the stock M919 ROM on the phone using odin. Odin repeatedly fails before the flash begins. Odin dislays "FAIL! (Auth)" and the phone displays message "SECURE CHECK FAILED : aboot". I have tried several different .tar.md5 firmware files from sammobile. I have tried several USB cables and every USB port on my PC. The phone isn't quite bricked, it still boots fine it's just the network unusable with my t-mobile sim and the at&t firmware.
Do I need to wipe the phone and do a kernel flash? I'm lost and any advice would be appreciated
Thanks in advance,
Ryan
pull out the battery and MAKE SURE the PHYSICAL sticker behind the battery says model SGH-M919 (not SGH-M919V) but exacly SGH-M919.
if that has been confirmed then download the ODIN image from sammobile
Download the latest M919UVUFOH3
install via odin using the PDA or AP slot depending what version of odin u have it will say PDA or AP.
btw: you are getting SECURE CHECK FAILED : aboot". error because you are either flashing wrong image or too old of a image and the boot wont allow it.
are you sure that it is not a stock I337 ? If it is, it would be much easier to just obtain the SIM unlock code to use it with T-Mobile, I337s are really difficult to root and the sim unlock code is free and takes less than 5 minutes on the at&t website
XeoNoX said:
pull out the battery and MAKE SURE the PHYSICAL sticker behind the battery says model SGH-M919 (not SGH-M919V) but exacly SGH-M919.
if that has been confirmed then download the ODIN image from sammobile
Download the latest M919UVUFOH3
install via odin using the PDA or AP slot depending what version of odin u have it will say PDA or AP.
btw: you are getting SECURE CHECK FAILED : aboot". error because you are either flashing wrong image or too old of a image and the boot wont allow it.
Click to expand...
Click to collapse
c_irie said:
are you sure that it is not a stock I337 ? If it is, it would be much easier to just obtain the SIM unlock code to use it with T-Mobile, I337s are really difficult to root and the sim unlock code is free and takes less than 5 minutes on the at&t website
Click to expand...
Click to collapse
Thanks for the replies fellas. I am sure it's a stock SGH-M919. The sticker beneath the battery says so. I've already tried using the most recent firmware from sammobile (ending with OH3) with odin and I receive the same error no matter what. I've even tried multiple versions of odin and have used PDA or AP accordingly.
c_irie, It's not a stock i337, I've read about the bootloader issues and Loki regarding that model. I would really prefer to do a clean M919 flash, but do you think I could use a sim unlock code from at&t with my current situation?
This may not be useful information, but here's exactly what is displayed at the top of the screen when I boot into download mode:
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
SECURE DOWNLOAD : ENABLE
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
rkham said:
This may not be useful information, but here's exactly what is displayed at the top of the screen when I boot into download mode:
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
SECURE DOWNLOAD : ENABLE
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
Click to expand...
Click to collapse
seems like someone sold you a "hybrid S4" the casing with sticker of the m919 but the "motherboard" of a I337...
was probably a "fixer upper" normally from those shady mom and pop cell shops/ebay/craigslist. consider that you got yourself a sgh-i337 even tho the outside doesnt say so...the board inside matches that of a i337 i will gaurentee u.
XeoNoX said:
seems like someone sold you a "hybrid S4" the casing with sticker of the m919 but the "motherboard" of a I337...
was probably a "fixer upper" normally from those shady mom and pop cell shops/ebay/craigslist. consider that you got yourself a sgh-i337 even tho the outside doesnt say so...the board inside matches that of a i337 i will gaurentee u.
Click to expand...
Click to collapse
Thank you for opening up a new realm of possibilities for me. I hadn't thought of that. Why would someone re-brand a i337? Do you think odin is failing because I have the wrong image for a i337?
Problem solved for now. I went ahead and assumed that it's actually an i337. I followed the suggestion above and requested an unlock code from at&t using the imei found in settings. I didn't think it would work, i figured the phone was stolen, but the code from at&t worked and I can use the t mobile network! thanks guys. I'm kind of bummed that it's an i337 since it will be difficult to root if i ever go down that path.
glad we where able to help you out. Sorry to hear that someone kinda scammed you and sold you the wrong phone. To be honest with you tmobile phones have a slightly higher resale value too...i hope you didnt pay the extra premium..esp since it was a fixer upper phone. well anyways glad you got it all figured out. btw: the att s4 on tmo is missing a band but you can possibly unlock it to have all the tmo bands.
http://forum.xda-developers.com/showthread.php?t=2291589
Yeah it's definitely not the device I was hoping to receive. I've discovered a few issues. I haven't been able to use internet at all without wi-fi, and the mic doesn't work in calls for some reason so I use speaker phone. Other than that, it seems to be working very well.
rkham said:
Yeah it's definitely not the device I was hoping to receive. I've discovered a few issues. I haven't been able to use internet at all without wi-fi, and the mic doesn't work in calls for some reason so I use speaker phone. Other than that, it seems to be working very well.
Click to expand...
Click to collapse
if you have used a factory ODIN image and flashed it and you have all those problems then im sorry to say it was probably a "fixer upper" phone that wasnt fixed properly. sorry to hear you are having all those problems...that sux. i always thoroughly test new phones IN PERSON before i buy them. i do the sim card test, screen color test, mic test, speaker test, model number test. and a voice and data and wifi test.
installing tmobile on att version
f irst of all you have to have root second you need to install a custom recovery such as TWRP. then you need to download the Wicked V.10 zip.then boot into recovery mode white data cache partition and dalvik cache partition.actually install the zip file you downloaded for the wicked v10 Rom. But make sure download the tmobile version because it willautomatically change your CSC settings
maybes this will help
Ok first things first. You have to be rooted and already have a custom recovery installed like TWRP or CWM. If u aren't rooted then try the king root apk. Once u have root access then you can go to download mode on your phone. Most of the Phones the power button & volume down at the same time will take you to download mode you have to search on Xda for the custom recovery version that is for your phone model it also has to be the Odin compatible ".tar" file. I use Odin 3.9 just because it seems to work better but after u have everything I've listed the install Odin 3.9 on your computer. Once that is done u have to remember where the custom recovery u should have already downloaded is located. Right click on the odin icon and click run as administrator make sure that you click on the BL button because that is where you will place the custom recovery.tar file. when you click on the BL button it will open up a window where you can search for the custom recovery that you downloaded earlier once you find it click on it and it will automatically go to the BL box then you click Start and just let Odin finish doing what it has to do when it says complete unplug your cable from the computer out phone reboot your phone hold volume up that should take you to your custom recovery once you have your custom recovery installed you can backup your whole system install zip files custom roms. things of that nature I hope this helps feel free to msg me if u have problems
Hi their.
was wondering if anybody could help me or know somebody who mite be able to help me in some way or another.
I tried rooting my phone which is a galaxy s4 mini using this site with these instructions http://forum.xda-developers.com/show....php?t=2364980. and it worked. but with problems connecting to my exsiting google account was saying couldn't establish a connection. so I repeated process this time I did step 10. bad choice as I didn't read it properly...... as for me I have the kitkat version and now at first it had a black screen....
my question really is could you or do you know anybody who has the original/stock s4mini firmware/software/rom. this is where im clueless. I have red people say im going to need to downgrade back to original to put it back on. ive looked everywhere online but to no avail.
ive been on to sammobile and downloaded every stock firmware their is for s4 mini gt-i9195. but none are working with my odid, they keep coming up failed.
phone tells me to connect to kies but when I type s/n it tells me my phone dosn not initialise. ?? ive got this on download screen...
odin mode
product name: gt-i9195
current binary: custom
system status: custom
knox kernel lock: 0x0
knox warranty void: 0x1
csb-config-lsb: 0x30
bootloader ap swrev: 2
write protection: enable
sw rev check fail: fused 2 > binary 1
many thanks
d'hurdinator said:
Hi their.
was wondering if anybody could help me or know somebody who mite be able to help me in some way or another.
I tried rooting my phone which is a galaxy s4 mini using this site with these instructions http://forum.xda-developers.com/show....php?t=2364980. and it worked. but with problems connecting to my exsiting google account was saying couldn't establish a connection. so I repeated process this time I did step 10. bad choice as I didn't read it properly...... as for me I have the kitkat version and now at first it had a black screen....
my question really is could you or do you know anybody who has the original/stock s4mini firmware/software/rom. this is where im clueless. I have red people say im going to need to downgrade back to original to put it back on. ive looked everywhere online but to no avail.
ive been on to sammobile and downloaded every stock firmware their is for s4 mini gt-i9195. but none are working with my odid, they keep coming up failed.
phone tells me to connect to kies but when I type s/n it tells me my phone dosn not initialise. ?? ive got this on download screen...
odin mode
product name: gt-i9195
current binary: custom
system status: custom
knox kernel lock: 0x0
knox warranty void: 0x1
csb-config-lsb: 0x30
bootloader ap swrev: 2
write protection: enable
sw rev check fail: fused 2 > binary 1
many thanks
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. I have moved your question to your device's Q&A forum. You'll receive expert advice here. Good luck!
Please help:
I was updating my phone to the Lollipop manually as I did not get the update over the air from ATT. While trying to update the all four files BL,AP,CP,CSC at once I tried sending the file one by one. This time at the bootloader file tried to update and failed. This time my phone started with the screen "Firmware Upgrade Encountered an issue Please select recovery mode in kies and try again" I did perform a back up of my media and contacts etc. However I can not use the kies for some reason. It does not recognize my S/N.
Problem now:
I am unable to use odin to send any type of file it the phone. It fails due to authriation error. read online that this is due to reactivation lock: on.
I tried the original file kitkat 4.4. it did not work.
ODIN Mode (HIGH SPEED)
PRODUCT NAME: SM-N910A
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: ON
KNOX WARRANTY VOICE 0X0
QUALCOMM SCREENBOOT: ENABLE (CSB)
RP SWREV: S1, T2 A1, A2, P1
SCURE DOWNLOAD: ENABLE
UDC START
From what I read you can't use an older firmware than 5.1.1. If I am wrong I apologize but I've been having update problems and was recommended to flash 4.4 and it would not take via odin. So I went looking and read that statement.
Sent from my SAMSUNG-SM-N910A using Tapatalk
You can only use v 5.1.1 if you've taken the update.
Sent from my SAMSUNG-SM-N915A using XDA-Developers mobile app
Samsung Galaxy S8+
Version Info
Model SM-G955U [SS]
PDA FA70_G955UQU4ARE1
PHONE G955USQU4CRE1
P_S/N UNKNOWN
H/W REV1.0
CAL.ID 2017.04.18
UN (NOT SURE IF TO GIVE THIS NUMBER)
MEMORY 64GB
Ran ODIN v3.12.7 and rom that came with it. now stuck in Factory Binary, trying to flash back to factory, any help? Ive tried several roms and either get fails. or sometimes gets abl.elf
in upload mode
[ UPLOAD MODE ]
User press powerkey 7 sec (it does nothing)
--------------------
DDR Vendor :Samsung
SOC_HW_REVISION : 2.1
last_ns :0xff
Generaring Summary
>>General Info
>>DDR Info
>>DCVS Info
>>RPM
>>Trust2one
>>Hypervisor
>>APSS
>>MOdem
Done!
in Downloading custom rom
CARRIER: vzw
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: Samsung Official
SYSTEM STATUS : oFFICIAL
FRP LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B4(2,1,1,1,1) K3 S4
SECURE DOWNLOAD: ENABLE
DID : 205E53BE31CB
AFTER RUNNING ODIN AND FAILING THERES ANEW RED LINE
SW REV CHECK FAIL : [ABL]FUSED 4 > BINARY 1
I am not an expert, but it sounds like you are trying to flash a bootloader that is an older version than the version 4 on your phone. I don't think you can downgrade the BL version. The fifth character from the end is the BL version. (e.g. G955USQU4CRE1) Also, you may need a newer version of ODIN.
Smithfolk4 said:
I am not an expert, but it sounds like you are trying to flash a bootloader that is an older version than the version 4 on your phone. I don't think you can downgrade the BL version. The fifth character from the end is the BL version. (e.g. G955USQU4CRE1) Also, you may need a newer version of ODIN.
Click to expand...
Click to collapse
so could i just google a "verison 4 BL for s8+" or something along those lines?
Kyles89 said:
so could i just google a "verison 4 BL for s8+" or something along those lines?
Click to expand...
Click to collapse
Yes. There are a lot of software versions available. If you use Updato you can search by model number and service provider (listed as region on Updato. I was able to find one with a version 4 bootloader. Similar to your version, but CRE9 at the end. It is an oreo version. Your phone is a model SM-G-955U when you search there. It might take a long time to download. I have sometimes had luck speeding things up by trying to restart the download. Sometimes it just takes a long time. Be careful when you are flashing if you have any desire to go back to a previous version. I am not sure of the limitations.
Another thing you could try that might be easier for you is to go to the JRKruse ROM thread here - https://forum.xda-developers.com/verizon-galaxy-s8+/development/rom-t3771206 and use the instructions he has there to install the ROM. There is another rooted ROM that he has that may also work for you. He has instructions on what to do.
Hello, my galaxy s8 is stuck in rpmb provisioned and its boot looping, I can get to download mode, it doesn't say things such as fuse blown etc. How can I get out of the boot loop? Help is appreciated.
Did you find a fix? Im having a very similar problem. I don't see any stock roms with a v4 bootloader. The most recent seems to be a v3.
Fixed it the way Smithfolk said. I was using the combination rom FA70_G955USQU4ARE1 with a V4 bootloader. I used odin v3.13.1 and flashed verizion G955USQU4CRE9 from Sammobile including the bootloader and it fixed my phone.