Develop Bugs

[Q] Bricked replacing CWM with TWRP using Goo Manager

I've been running the Cyanogen ROM and recently developed a problem with the phone not producing an audible tone when I receive a call. I was going to flash a debloated stock ROM to see of that made any difference since I couldn't find any reason for the phone not ringing. It was recommended to use the latest version of TWRP to flash the ROM. I used Goo Manager to replace CWM with TWRP and now I have a brick.The Samsung logo will appear briefly when the phone is powered on and then the screen hours blank. Does anyone have any ideas for a rescue plan? Any help will be greatly appreciated.

max2361 said:
I've been running the Cyanogen ROM and recently developed a problem with the phone not producing an audible tone when I receive a call. I was going to flash a debloated stock ROM to see of that made any difference since I couldn't find any reason for the phone not ringing. It was recommended to use the latest version of TWRP to flash the ROM. I used Goo Manager to replace CWM with TWRP and now I have a brick.The Samsung logo will appear briefly when the phone is powered on and then the screen hours blank. Does anyone have any ideas for a rescue plan? Any help will be greatly appreciated.
Click to expand...
Click to collapse
You need to Odin a TWRP tar file from here:
http://techerrata.com/browse/twrp2/hercules
To anybody else reading this STOP USING GOO MANAGER TO UPDATE YOUR RECOVERY ON HERCULES!

I'm having the exact issue the samsung logo appears briefly and then the phone vibrates and quickly powers off... I'm curious as to why flashing a recovery image (I flashed it through heimdall) would interfere with the boot process this early on. The phone wont enter download or recovery mode (hard bricked) going to try a USB jig as a last resort.

Yea, same thing happened to me. Goo manager is bunk.. like previously stated i had to use odin to fix it, never used goo manager for anything again.

Will a USB jig get me back into recovery mode so I can flash the TWRP file using Odin?

max2361 said:
Will a USB jig get me back into recovery mode so I can flash the TWRP file using Odin?
Click to expand...
Click to collapse
You can use a jig. Or you can hold volume up + volume down while you plug the USB cable into your computer.

max2361 said:
Will a USB jig get me back into recovery mode so I can flash the TWRP file using Odin?
Click to expand...
Click to collapse
if you cannot go to download mode, USB Jig is the only way:
http://www.diygadget.com/samsung-galaxy-s-i9000-s2-i9100-download-mode-usb-jig.html
It happened to me, I had to use the above Jig to fix it.

[Q] recovery problem

Hey guys .. after I upgraded to 4.4.2 I coulding install any custom recovery on my note 2 7100 ..when I used odin is says every thing is alright and pass but nothing change the stock recovery only show and nothing else ..I tried it with several custom recovery but it is the same at the end..
please if there is any thing could be done help me.

droid aka said:
Hey guys .. after I upgraded to 4.4.2 I coulding install any custom recovery on my note 2 7100 ..when I used odin is says every thing is alright and pass but nothing change the stock recovery only show and nothing else ..I tried it with several custom recovery but it is the same at the end..
please if there is any thing could be done help me.
Click to expand...
Click to collapse
Try flashing the custom recovery again but uncheck "auto reboot" in odin and then once done flashing manually enter into recovery mode by pressing volume up + home + power and let go of all 3 buttons as soon as you see the samsung logo.Prior to doing this put superSu v 1.94 in your sd card so you can flash it right after booting into recovery ,this would root your phone for more guidance refer to this guide.Philz touch 6.26.6 or 6.41 should be used.
http://forum.xda-developers.com/showthread.php?t=2730764

can't boot to recovery, bad USB port

Hi, simple quick question.
Have a bad USB port, so any hope of Odin or any PC help is out of the picture. I had the phone rooted with towelroot and twrp(terminal emulator method). Switched to a version of cwm(not the latest and can't remember the version) couldnt flash the philz or cwm recovery zips.
Tried the terminal emulator method again, found a different guide and the recovery boots to download mode. As well as the power on button only.
Is there chance of recovery or complete reset??, at this point the phone has been off for at least two hours.

So you flashed cwm and now when you press home, volume up and power it boots to download?
Can you boot normally into Android? If so, check out Mobile Odin by chainfire. He's got a thread here on xda for it. Maybe it can help you get where you need to be.
Sent from my SGH-T999 using Tapatalk

after install rom touch not play

Hallo
after installing the ROM in SM T900 touch it does not work.
I tried to fix it with many rom and still the same .
not to do HELP PLEASE!!!
Sorry for the translation

pitt66 said:
Hallo
after installing the ROM in SM T900 touch it does not work.
I tried to fix it with many rom and still the same .
not to do HELP PLEASE!!!
Sorry for the translation
Click to expand...
Click to collapse
Does touch still work under TWRP? Is so flash a different ROM....

i dont open twrp

sorry
I cant open twrp

TWRP in case you were not aware is the recovery mode.
From off, Press Volume Up, plus Power. If you still can not get into TWRP, (Or whatever Recovery you have installed), then you need to reflash a Stock ROM (Volume Down, plus Power, then Volume Up), and connect via USB to a Windows PC running Odin.

Thanks Ichijoe
I have running odin and I have reflashed some ROM. All Of rom aré installed ok but the problem Dont fixed...Dont play touch
I Dont know what i can do now. ?

Soft-bricked Note 10.1 2014 (SM-P601) stuck on boot-screen?

So I wanted to root my note 10.1 (2014 edition) and i did it with Kingo root with my PC and it was a success.
Then I wanted to install a custom recovery next and this is where it went wrong. I tried doing it with the Flashify app and may have flashed a wrong .img file... (backed up stock recovery)
Then when I rebooted it just gets stuck in the boot screen.. I cant access the recovery mode but i can go into download mode.. I dont really know how to fix this :/

Go into download mode and see if you can flash the recovery again with Odin
Sent from my SM-N915G using Tapatalk

Not staying on x(
I tried doing it but now theres a new problem x( the tab dosent even turn on now and i dont think it charges. it turns on when i connect the charger plug but turns off by the time i enter the download mode