Q&A for [ROM][DEV][OFFICIAL][v500] CM 11.0 Nightlies
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][DEV][OFFICIAL][v500] CM 11.0 Nightlies. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
May i install cm12 nightly over cm11, or i need wipe and do a fresh install?
andfrancaBR said:
May i install cm12 nightly over cm11, or i need wipe and do a fresh install?
Click to expand...
Click to collapse
Try and see. One time it worked for me - but could fail...
Make a recovery backup & then you *can* get back by getting to factory reset page in TWRP.
So it all counts on how much you know what to do...
Problem installing PA stock gapps with CM12 nightlies on TWRP
I'm also having issues installing the pa full stock gapp on TWRP with the latest CM12 nightlies, saying I have insufficient space. It's really been bugging me as I like my devices as close to stock as possible. I'm by no means an expert but believe I have found the issue; the system partition size after installing CM12 has about 400mb remaining which is not enough for the pa stock gapps zip to install. I've also tried the modular gapps which didn't work either but found the mini package to work fine. This was never a problem when using CM11 as the remaining system partition size was much higher. You could probably change the partition size manually but I'm too much of a noob to attempt it haha. Do you think it will be addressed in CM12 official nightlies the near future?
Help to fallback to CM11
Hello all,
I have tried the CM12 nightly and I don't like it much (no quick settings toggle, sound mode/vibrate missing, excess animation effects), and it is not stable yet (kindle app keep self-crashing). Therefore I want to fallback into CM11, but the download links at download.cyanogenmod.org are all dead. Anyone still have a good latest nighties of CM11 v500 rom for share? Thanks.
hkBetaBoy said:
Hello all,
I have tried the CM12 nightly and I don't like it much (no quick settings toggle, sound mode/vibrate missing, excess animation effects), and it is not stable yet (kindle app keep self-crashing). Therefore I want to fallback into CM11, but the download links at download.cyanogenmod.org are all dead. Anyone still have a good latest nighties of CM11 v500 rom for share? Thanks.
Click to expand...
Click to collapse
ok, seems no one interested to run CM11 anymore, I've build it from the source code myself. Here comes the latest cm-11-20150129-UNOFFICIAL-v500.zip.
Code:
[email protected]:~/android/system/out/target/product/v500$ ls
android-info.txt data previous_build_config.mk root
boot.img external ramdisk.img symbols
clean_steps.mk fake_packages ramdisk-recovery.cpio system
cm-11-20150129-UNOFFICIAL-v500.zip installed-files.txt ramdisk-recovery.img system.img
cm-11-20150129-UNOFFICIAL-v500.zip.md5sum kernel recovery userdata.img
cm_v500-ota-8a2f867575.zip obj recovery.img
Just tried it in my gpad and works great. Now I have a stable running tablet again. :laugh:
Response
Ridiculous that I can't respond directly to someone on any thread because I need 10 posts. So I'll write my response through this Q&A section and eventually I'll be able to help people directly.
To the guy that said "Me, google play services crash on every boot, and after that in use. So I went back to last CM 12" after installing the latest CM12.1 update...
You need to separately update your third party add-on zips i.e. your gapps. This is stated in the latest Cyanogenmod blog "Microsoft and CM12.1 Nightlies".
json30 said:
Me, google play services crash on every boot, and after that in use. So I went back to last CM 12.
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Related
Q&A for [ROM][4.4.4][TeamCanjica] CyanogenMod 11.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
question
Hi guys, i have a bug: calling history not show
Problem
It repeatedly giving error com.android.phone has unfortunately stopped . And the ROM is able to search the mobile networks but there is bar in signal strength . Means it not getting the signal .
Rest everything is ok .
PLease help me ASAP .
Does video recording work on your phone? Because I have camera app crashing all the time after switching to video.
Some Question about this ROM
Hi,
my Ace2 is still running under Stock Android 2.3.6. and I would like to Upgrade to CM.
For me stability and a working phone are more important than having the latest android Version, so my question is - which CM Version would you recommend? CM11 or is CM10.2 more stable? And is the latest version also the most stable one?
Is it correct that the only issue with CM11 is the Live streaming problem and with CM10.2 the memory leaks reported by some users- or are there more problems with these ROMS? A well working GPS is also important for me - is this the case?
And how difficult would it be to go back to stock 2.3.6. if CM is not working well for me?
Sorry for all the question and thanks in advance!
bootloop on the latest build from Rox
stuck on boot loop as is:
http://forum.xda-developers.com/showpost.php?p=56027724&postcount=5377
cm-11-20140807-UNOFFICIAL-codinap from @ace2nutzer
Install the firmware, reset the smartphone, then GAPS. If all at once, when you start on selecting the language setting is not. This, in my case, I tried several times. @ace2nutzer when to expect an update of your firmware
Hello
i have the i8160L,are the links you gave working on that version?
also if its working and i root that cm11,can i get back to my original firm later?
thanks
Bootloop
Rox, are you going to be fixing teh bootloop in the last build?
Also: the call log is empty, is there any fix for that?
Blackscreen
I want to record a logcat showing a black screen ocurring on wake up, with the s6d driver, in order to help in the resolution of the bug...
What's the priority level I should set for the catlog? Verbose, Debug, Info, Warnings, Errors, or Fatals?
Reboot loop with 1014 update
WARNING: I'm stuck in a reboot loop after updating to the recent 1014 version. Can't even get into recovery mode anymore. Flashed stock rom, installed CM again: same picture.
Grmblprmf said:
WARNING: I'm stuck in a reboot loop after updating to the recent 1014 version. Can't even get into recovery mode anymore. Flashed stock rom, installed CM again: same picture.
Click to expand...
Click to collapse
Flash chrono kernel..1014 build got a kernel broken...
@hackstorm1989
I have the GT-I8160L too.
This ROM specifically i haven't tried yet, but I've installed 2 different builds of NovaFusion CM11 (http://forum.xda-developers.com/showthread.php?t=2568105) and now I'm running J-TEAM AOSP (http://forum.xda-developers.com/showthread.php?t=2588054).
As TeamCanjica, both these ROMs are for the GT-I8160, but can be installed on GT-I8160L by changing the lines in the updater-script of the ROM (META-INF/GOOGLE/ANDROID/) where it checks the model of the device. I also read that the tee folder (system/lib/) of the ROM must be replaced by a copy of a tee folder from a running GT-I8160L firmware with SIM and carrier services properly working.
I've followed this guide:
http://brasildroid.com.br/showthread.php?t=23729
So, just by checking the updater-script of teamcanjica CM11, i GUESS it could be installed on GT-I8160L through the same 2 steps that i did with the other cited ROMs.
Also, I remember seeing other members running these ROMs on the L version while reading these 3 threads. I really wanna know what exactly differences are between these 2 device versions.
Please anyone let me know and correct me if I've posted any wrong information.
@soraxx
I can´t post in the main thread yet (10 post treshold), but maybe you read this or someone can copy this into the main thread.
I had exactly the same problem (audio but no video picture) and a simple change from stock browser to firefox solved it - Maybe it works for you too.
This should be main thread from now on
Same problem
Bootloop
14.10 bootloop
@ace2nutzer
I don´t agree with your statement that everything is working with the 07/08 build. I am using that build and the camera video recording is definitely bugged.
Elder666 said:
@ace2nutzer
I don´t agree with your statement that everything is working with the 07/08 build. I am using that build and the camera video recording is definitely bugged.
Click to expand...
Click to collapse
read this carefully:
http://forum.xda-developers.com/showpost.php?p=56171431&postcount=5436
Hi guys,
In stripped versions I notice camera quality and time of battery are worse... I'm going to try the build made for ace2nutzer 07-aug-2014 and stay on it by now.
Q&A for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-1]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DEV][ROM][4.4]Cyanogenmod 11[WIP][ALPHA-1]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Camera app
After updating to RC11 I didn't have an stock camera app. If you don't,download the google camera zip from the post with all the gapps,extract it and install the apk from system\app,then it'll work
Should there be an stock camera app?
Bluetooth won't connect
Hi,
I run cm11 rc13 on my gio. I paired it with my tablet. I can send and receive files.
However, the connection won't stay. This is frustrating because I want to use my phone to smart unlock my tablet.
Is this a known bug, or am I the only one experiencing it?
I think Gio doesn't support ext4
As the title says,I can't seem to make my Gio running RC11 To make my sd-card an ext4 partition,the recovery makes it ext3 even do selected ext4. Any support? Need it for space issues
Using Cast Screen
Hi;Can any one Use Cast Screen in this rom? I Have a LG Smart TV and For use cast Screen First Should Conect to TV via WIFI Direct But This rom Hasn't WiFI Direct! Can anyone advise what should I do? (Sorry for Bad English!)
Can't get this install working - stuck on the blue CM logo after flashing..
Doing a wipe after the flashing causes the phone to hang one step earlier - with the Samsung logo.
- CWM 6.0.5.3.
- CM11 4.4.4 RC13 / RC14 (both give same problem)
- Flashed from stock ROM (A 2.3.7)
a2sd darktremor in cm11
Anyone has got a2sd darktremor working with cm11 Rom? After Installing referring steps from many installation guides, used 2.7.5.3 beta04 script with ext4(512mb) partition, when i do an a2sd check it says
Segmentation fault
Segmentation fault
/system/bin/bash: /system/bin/launcha2sd: No such file or directory found
TIA
me too!
mpc007 said:
Can't get this install working - stuck on the blue CM logo after flashing..
Doing a wipe after the flashing causes the phone to hang one step earlier - with the Samsung logo.
- CWM 6.0.5.3.
- CM11 4.4.4 RC13 / RC14 (both give same problem)
- Flashed from stock ROM (A 2.3.7)
Click to expand...
Click to collapse
I have the same issue, have you come across a fix? Also, where did you download your stock ROM from? I can't find any links that work anymore! I have found one, but its all in a language I cannot read! :S
orangejuice43 said:
I have the same issue, have you come across a fix? Also, where did you download your stock ROM from? I can't find any links that work anymore! I have found one, but its all in a language I cannot read! :S
Click to expand...
Click to collapse
are you the same guy from "Half-bricked gio" thread
anyway, here you go:
http://www.sammobile.com/firmwares/database/GT-S5660/
amazing!! yes I am and thank you very much
I can't find the latest build, I guess its RC14, because the arm6 website is down...
Does anyone have it?
Q&A for [ROM][AOSP][4.4.4][AOSP Kangs][DJL4.4][Linaro][Build 26][2014/08/07]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][AOSP][4.4.4][AOSP Kangs][DJL4.4][Linaro][Build 26][2014/08/07]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
yess please!
farenteria said:
Inbox for Gmail. It's a slightly different take on Gmail
Click to expand...
Click to collapse
Please me to!
[email protected]
Thanks!
Inbox invite
Hi there,
If you have any inbox invites left, I'd like to have one.
Thanks,
ubergeek2112
Once your update comes out, do I need to factory reset before flashing?
Will I need to factory reset or can I just flash the ROM and SuperSU again?
TitaniumBackup_6.2.0 apk issue
Hello,
I've installed the newer apk of Ti and it's not responding.
When I click on it, it goes through the initial steps then gets hung on "checking for SQLite support"
SuperSU is working fine.
Please let me know what to try.
Miscallenous takes the most battery about 40% and rotate not working, help me
system crashing after gapps install on lollipop
I followed the directions and did a factory reset, installed DJL5.0 Build 6 [2014/11/16], gapps-lp-20141109-signed.zip and rebooted. When my Nexus 7 starts up, I get multiple dialog boxes stating:
Unfortunately, Setup Wizard has stopped.
Unfortunately, Gmail has stopped.
Unfortunately, the prrocess com.google.process.location has stopped
Unfortunately, Google+ has stopped.
...
...
Any advice? Thanks.
I have 04.02 Bootloder, but on this ROM works everything perfect its normal?
Which is better?
This ROM you use or the Stock Android 5.0 by google?
Very bad battery 90% consumed by !isacallenous
status bar
In last build, You dont fix a graphics issue when pull down status bar on the right site.
Settings is broke..?
*sighs* settings end up breaking after I flash Gapps? I tried two different packages, and they both broke.
From android version 4.4.2 to aosp 5.0
I have a rooted, bootloader unlocked, with TWRP nexus 7 2013 (32gb wifi) running android 4.4.2 but have not installed a custom rom till date. Now if i want to flash a custom rom such as this one forum.xda-developers.com/showthread.php?t=2510141(android 5, while my nexus is on 4.4.2), all i have to do is download the rom from the link given in the instructions and flash it via TWRP. From what i understand from the instructions, it doesnt matter what my tablets kernel number etc is, all i have to do is flash it via TWRP. Or is it that the new kernel is included with the flashable zip file, that i am to download.
Any input or advice is appreciated.
Thanks in advance
Gapps flashing problem
delete
im using grogg's build and im having an issue with close recent apps .
it force closes system ui.
Great rom!
I Don't have any issues so far.
I have the newest bootloader and TWRP.
Running this with the elemental x (3.03) kernel.
Flashed scrosler's rooted stock lollipop rom first. Runs very well.
Tried Liquidsmooth, but it wasn't very... smooth yet.
Just want to thank you, dev! Great work!
If I have any issues, I'll post them.
Is there no encryption on this ROM? I had the same issue on kk builds.
Sent from my Verizon NC5 Galaxy S4 w/ GEL and Xposed
Q&A for [ROM] [5.0] Deb - lrx21m
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [5.0] Deb - lrx21m. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
data is working just fine on my side.
Anyone able to root the device, everything else works fine for me along with twrp but the root app keeps saying binaries not updated
panjaby said:
Anyone able to root the device, everything else works fine for me along with twrp but the root app keeps saying binaries not updated
Click to expand...
Click to collapse
I believe it is because a new kernel has to be generated in the boot.img with permissive mode turned off. Once that is flashed then root will work properly.
@QA Bot could you please change the build number from "m" to "t" for me in the first post. I do not want people getting confused.
Root is working with latest chainfire app and element fix kernel.
Awesome
root
Root is OK with chainfire utility.
Root is OK
I too have successfully obtained root using Chainfire's AutoRoot for DEB 4.4.4 (NOT the one for FLO 5.0); everything is working mighty fine so far.
Thank you very much, fosser2!
I'm coming from completely stock. I see you have a simple fastboot image for aosp... Can I get the gapps on as well without a custom recovery being installed?
hey, i has just install rom, but when i connect my laptop, it don't have MTP conect, so now, i can't flash a new rom because my laptop don't receive my nexus 7 via USB, what should i do next?
hotspot
Was hotspot accidentally leftout or is it not compatible?
Data Speed
Thanks for this great rom! Everything seems to work for me, but i have noticed slower data speeds than i had on 4.4.4. Anyone else noticing that?
Awesome work! Thanks. Everything works. I love stock Android with no modifications. Keep it up.
gg
ggg
AOSP Nexus 7 LTE (2013) Building from Source - Driver?
EDIT: Moved this to a separate thread as this is for an outdated version.
I'm just learning to develop from AOSP right now, I've done some modifications in the past but want to learn to build AOSP roms from source.
I've gone through and setup my build environment, downloaded source code for 5.0.2_r1 and downloaded the proprietary drivers and extracted them into a vendor folder within the root of the source tree. When I build the ROM I don't get any errors, but I get a boot loop.
I've tried using the 4.4.4 drivers for Deb, as well as the beta drivers, and both produce the same result with the boot loop. Can anyone provide me any guidance on building this or if there is customization required to get 5.0.2 to work on Deb? I know there are ROM's out there and Fosser has build a 5.0.2 stock AOSP rom, but I can't figure out how to get it to boot. Everything seems correct right up to the point of booting after fastboot loading the device.
Thanks!
Q&A for [ROM][CM12.1][OFFICIAL] CyanogenMod 12.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM12.1][OFFICIAL] CyanogenMod 12.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Is Dirty flash possible
Sorry im a little confused , I have a ls980 that has never had the radio firmware updated and i have been on CM up until CM 11
My question is Can i just Dirty Flash over cm 11 nightly to this cm 12.1 and get the gapps flashed to or do I have to do a complete wipe?
Thanks
The CM12.1 thread says to revert to stock and then flash 12.1.
Do the camera and flash really not work at all?
And what's wrong with the 7-17 Gapps package?
Coming from cm 11 want to go to cm 12.1
Ok so my questions are still:
1 Can I flash 12.1 over cm 11 that still has the original zv8 Radio on it ?
2 If i have to Flash the original sprint software how would i be able to upgrade to the new radio if i don't use sprint
Flashed 8/14 nightly on LS980 that uses Boost Mobile. Everything working except data. Lost data and MMS. Looked around and found a universal apn fix. Flashed it and got 3G back. Still no 4G connection and 3G drops frequently. Any ideas on a better fix?
How's everyone's GPS signal? I can't seem to lock on a satellite
IR blaster working with this rom?
Do you have blastagator bumped twrp? I flashed zv8 radoo that n factory/wipe dalvik and cache before flashing cm12.1 and tbo stock gapps.
Sent from my LG-LS980 using XDA Free mobile app
NFC issue
ROM running extremely well, definitely daily driver material and overall faster and more stable than LG stock.
One issue - been running this ROM since 8/16 and have never been successful in turning on NFC. Currently on 9/09 nightly and still won't turn on NFC.
Behavior: Tap to turn on NFC, switch moves to on position, line remains "grayed out." Sometimes the switch automatically moves back to off position and vibration motor activates, other times it just says "on" but remains grayed out. Upon a reboot it appears back in the "off" position.
I don't see NFC listed anywhere as a known problem - am I the only one? I know other AOSP roms have listed NFC as broken for LS980 for quite some time...wondering if I can help. I attached a log file - with android pay coming soon NFC might actually become useful