Develop Bugs

[ICS][CM9][HWA]Quarx Defy/Defy+ builds - GB and Froyo [Latest builds 16-07-2012]

OK, guys, since adi4motion's thread got locked and the new thread turned into SPAM without any useful information and got moved to the General section, we don't have a thread for Quarx's GB builds. Therefore I am creating this thread to keep track of Quarx's builds. I will do my best to keep it as up-to-date as humanly possible.
NB! This thread does not aim to collect "Thanks". I'd rather answer to questions here, where everyone can benefit from the answers, than having to answer the same questions over and over again on PM.
I'm not taking any credit for this! Please, do not thank me! If you want to thank somebody, thank Quarx, Epsylon3 and maniac103, as they are the ones, responsible for all that! Better yet, you can consider some donations to them for all their continuous efforts!:​
Quarx - donations
Epsylon - donations
maniac103 - donations
Also, consider thanking:
adi4motion, parts of whose old thread I am using in this and
nogoodusername, who has been keeping track of bugs and has helped many people get their phones up and running. (Please forgive me if I have missed to give credit to somebody).
Defy+ Builds
Latest Defy+ build: 16-July-2012
Older Defy+ builds: here​
Click to expand...
Click to collapse
Defy Builds
Latest Defy build: 16-July-2012
Older Defy builds: here​
Click to expand...
Click to collapse
Gapps
Latest Gapps: http://goo.im/gapps/gapps-ics-20120429-signed.zip
Kernels
GB kernels: CM9_Kernel-signed.zip
4.5.2_DHT-22_kernel: 4.5.2-109_DHT-22-kernel.zip
Froyo kernel: froyo-222-179-4-signed.zip​
Click to expand...
Click to collapse
Flashing instructions​NB! Before you start flashing, make sure your battery is charged at least at 50% (fully charged recommended)!​
1. Download your preferred build and put it on your SD card
2. Download your preferred kernel and put it on your SD card (skip this step if you own Defy+)
3. Download the latest gapps and put it on your SD card
Head over to Stable recovery from Boot menu
4. Wipe data/factory reset (only if doing a fresh install; skip if upgrading from an earlier Nightly) (Optionally you can make a Nandroid backup before wiping data)
5. Wipe cache partition (you can skip this step if you performed Step 4)
6. Wipe Dalvik cache
7. Install Froyo kernel if you are flashing the Defy build (ex. if you own a green-lensed Defy) or a GB kernel if you are flashing the Defy+ build (ex. if you own a red-lensed Defy ) (Skip if you own Defy+!)
8. Install your Nightly build
9. Install gapps
10. Install ICS Defy Red Lense Battery fix (only if you have Defy with red lense)
11. Wipe cache and Dalvik cache; Reboot.
NB! First boot may take up to 10 minutes.
After you have flashed CM9 kernel and your system booted up, you can try flashing the 4.5.2_DHT-22 kernel (mandatory on top of CM9) - some users have found it to be more battery efficient.
Upgrading nightlies​
1. Install new nightly build
2. Wipe cache and dalvik cache (optional)
3. Reboot
Click to expand...
Click to collapse
+ICS bugs (all kernel versions) http://forum.xda-developers.com/showthread.php?t=1381887
Bugs/not working yet​
- managed mode tethering still does not work
Click to expand...
Click to collapse
Additional downloads​Music application
Apex Launcher (Recommended)
Theme patcher Mixer_ICS
Click to expand...
Click to collapse
Apex Launcher as system app​
For a really smooth and snappy launcher experience, I recommend using Apex launcher and adding it to the whitelist in your build.prop file.
1. Download Apex.apk file
2. Via root explorer place it in /system/app
3. Set its permissions to 0644 (rw-r--r--)
4. Reboot and enjoy your smooth and snappy launcher
Click to expand...
Click to collapse
If I have missed some useful information, you can PM me and I'll do my best to add it within 24 hours and credit you for this!
Here are some screenshots:

Changelog
Quarx2k github
Code:
[B]CM9-NIGHTLY-1200708-Defy+[/B]
+Apps2SD
===============================================================================
[SIZE="2"][B]CM9-NIGHTLY-1200706-Defy+[/B]
+Full HWA implemented
===============================================================================
[B]CM9-NIGHTLY-120609-Defy+[/B]
+ip6table_mangle disabled to fix Droidwall
[I][SIZE="1"][B]Changelog by[/I][/B] me - got changes from github[/SIZE][/SIZE]
===============================================================================
[SIZE="2"][B]CM9-NIGHTLY-120607-Defy+[/B]
+4th vsel is present in Boot menu CPU settings again
+New lock screen (weather in lock screen)
+Mobile data limiter is now implemented and working
+Update adbd root binary with current sources (v1.0.29-cm9) [[URL="https://github.com/tpruvot"]tpruvot[/URL]] - Why do we need that ? because at bootmenu stage, the property
service is handled by the original froyo or gb kernel init. It is set to ro.secure and cant provide root permissions required for the bootmenu shell and the recovery...
+Two more modules ipv6 netfilter modules required [[URL="https://github.com/tpruvot"]tpruvot[/URL]]
+system.prop edited - Set com.ti.omap_compat for future use (OMAP_COMPAT); clean spaces and remove duplicated button brightness [[URL="https://github.com/tpruvot"]tpruvot[/URL]]
[I][SIZE="1"][B]Changelog by[/I] cristianosite[/B] and me - got changes from github[/SIZE][/SIZE]
===============================================================================
[SIZE="2"][B]CM9-NIGHTLY-120526-Defy+[/B]
+Data usage by app now works
+Apollo player
+Baseband selector now works
+update xt_owner2.ko from tpruvot repo (from Quarx's github) (Don't know what this one does...the working data usage maybe???)
+Update flash and focus mode when a scene mode is set.
-Back to Bootmenu 1.1.9
-Revert "tweaks" in Bootmenu (from Quarx's github)
-Revert "tweaks" in Profiles (from Quarx's github)
[I][SIZE="1"][B]Changelog by[/I] ChirmiPlay, ktmbikerman and me[/B][/SIZE][/SIZE]
===============================================================================
[SIZE="2"][B]CM9-NIGHTLY-120522-Defy+[/B]
+includes maniac103's baseband selector featuring a nicer interface and more selections, including the correct baseband for South Africa
+Bootmenu 1.3
+I/O SIO sched
+Boosted CPU Governor
+CPU Governors now work (Smartass, Boosted..)
+continuous scrolling in boot menu and recovery when volume keys are held (no need to release and press again)
[I][SIZE="1"][B]Changelog by[/I] ktmbikerman, ChirmiPlay and miziel[/B][/SIZE][/SIZE]

I dont know why everyone mention that Trebuchet is laggy It works as Apex for me!
BTW, the link to the BUG thread is invalid.

Just pmed asking Quarx to make a thread himself then saw this!... problem is that I don't think he reads my pm... if anyone one of u can contact him plz tell him to make a thread him self...
Sent from my MB526 using xda premium

Finally something useful comes up.....lol..last couple of days have been confusion unlimited.....!!!!!
Oh btw...for me...I have listed chrome in whitelist...use forced 2d gpu rendering in settings....yet...it has never worked for me....it never loads fully.....anything else I can do.....anyway...I am 0905 nightly...
Sent from my MB526 using XDA

nogoodusername said:
Just pmed asking Quarx to make a thread himself then saw this!... problem is that I don't think he reads my pm... if anyone one of u can contact him plz tell him to make a thread him self...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I have PM-ed him once too (about a different matter), but never got a response... Guess he's really busy and doesn't have time for everything, but if he decides to create a thread himself, I would gladly ask a moderator to close this - afterall, it's the developer who should be starting and updating a thread for his own ROM. I just wanted to put all the information in one place, so I don't have to rewrite it over and over again in PM's.

Agree auris, but you are a serious guy so I hope this will be it, I guess quarx will be happy that you do this to help, now he can concentrate on his amazing development and you can control this magnificent/needed serious tread. Thanks mate
Ps! Don't ask about my signature, I also have a LG Optimus 2X
Sent from latest Django Manouche with latest Spica Kernel

IMO also Quarx should have created own thread and add donate info coz he really deserved.
Epsylon added new CPU governor to his rom, hope Quarx will do same

It would be better to switch to this theme in the development subforum

Why!?
Hi all.
Excuse my ignorance, but can someone explain to me why the thread for CM9 (the Adi one) got deleted, and all the other CM9 threads ended up here in General?
Everyone seems to be confused.
Thanks

Hi, I've successfully install the CM9 Rom (Quarx version) on BL7, but the thing is, I'm unable to open the "com.android.settings"...it automatically stop when I open it...making me unable to do any configuration...I'm using Defy + by the way...
Can please anyone assist me on this...I tried to search the answer on the web, but unable to find any...just some suggestion to un-install apps, but how I'm supposed to do it since I'm unable to open the setting/configuration apps...
Thank you...

hi thread starter, will it be all right if you provide a link to download the last 4 apks (music, apex etc.) without using dropbox? some, like me, may not be able to access dropbox

Auris 1.6 vvt-i said:
I have PM-ed him once too (about a different matter), but never got a response... Guess he's really busy and doesn't have time for everything, but if he decides to create a thread himself, I would gladly ask a moderator to close this - afterall, it's the developer who should be starting and updating a thread for his own ROM. I just wanted to put all the information in one place, so I don't have to rewrite it over and over again in PM's.
Click to expand...
Click to collapse
he replied and said he will do it and his exams... so...
Sent from my MB526 using xda premium

OK..I had tried d cm9 music app on 1304 nightly....was working nice sly....but removed it due to heavy memory consumption an back battery efficiency.....today. .I again tried that bcoz d stock player is yuck...n it went bad....after copying it to /system/app nd den setting permission n den installing the app.....my phone rebooted automatically....n den after that phone a completely lost root . ...root explorer fails to mount system as r/w....and tb fails in gaining root access.......any ideas anyone y Dis hpnd .....good thing I had a backup in hand......!!
Sent from my MB526 using XDA

Thanks, Auris for starting this thread! You're the right guy to keep track of Quarx's builds

@ Auris
The name of the thread is [ICS][CM9]Quarx Defy/Defy+ builds for GB kernel
Is that means so there will be only discussion about Defy's with GB kersnel?
What about Defy's with Froyo kernel?
Sorry for dumb questions, but it is not clear for me...

nogoodusername said:
he replied and said he will do it and his exams... so...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
That would be awesome, 'cause he definitely is the right guy for this! I'm really glad about this, so as soon as his thread is up, I'll ask a moderator either to delete this thread, or to merge it with Quarx's one.
trurl3 said:
@ Auris
The name of the thread is [ICS][CM9]Quarx Defy/Defy+ builds for GB kernel
Is that means so there will be only discussion about Defy's with GB kersnel?
What about Defy's with Froyo kernel?
Sorry for dumb questions, but it is not clear for me...
Click to expand...
Click to collapse
Quarx is only building GB builds now and Epsylon3 already has his own thread, so yes, this one will only follow Quarx's GB builds (just until he opens a thread himself).

utoi80 said:
... unable to open the setting/configuration apps...
Click to expand...
Click to collapse
Did you wipe cache and dalvik cache after installation?
kevraul said:
hi thread starter, will it be all right if you provide a link to download the last 4 apks (music, apex etc.) without using dropbox? some, like me, may not be able to access dropbox
Click to expand...
Click to collapse
I don't have other online storage and they are bigger than the allowd attachment size to upload on this board. Didn't know there were limitations for DL'ing from Dropbox
bharaththeunique said:
....after copying it to /system/app nd den setting permission n den installing the app.....
Click to expand...
Click to collapse
You don't have to install it. Just copy it to the app folder, set permissions and reboot.
P.S. Wow... This was my post #666 on this board!

Thank you so much...after I did the clear cache & dalvik after installation, i can access the setting/configuration already...thank you so much...
I only did the clear cache before the installation...

Can expect a new nightly shortly.....coz Apollo player officially released by Andrew Neal today.....and officially included in cm sources.....yay....n oh ya...d app is smoooooth.....but many customizations removed in the first release.....
Sent from my MB526 using XDA

[ROM][PORT][Samsung Galaxy GT-I5510 ]Unofficial Cyanogenmod 7

Unofficial cyanogenmod 7.2 for samsung galaxy I5510
These are ported
From what i know this rom is completely stable. If you find any bugs post here i will try to fix it​
What is working?
everything
Camera Working
Sensors Working
WiFi Working
3G/2G Working
Bluetooth Working
GPS Working
USB Tethering Working
Wifi tethering Working
Call Working
Headset Working
ADB Working
SDCard Working
Vibration Working
Keyboard Working
Video Working
What is not Working?
try and find and post here
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Overclocked upto 806 MHz
I will upload whenever a new cyanogenmod 7.2 nightly releases
The link for stable cyanoegnmod 7.2 is also availabe.Your choice to use the one you want.
Download Link- Cyanogenmod
mod edit
after flashing cm7 nightly flash the gappsgb
some apps Post
CyanMobile by squadzone
Bugs fixed. have fun
Spideroak - Download
Flash using CWM made by willing magic for gingerbread bootloader
if apps are force closing wipe cache and data after flashing.
I have taken things from many roms and developers. None of these are my property. I just combined them to give a stable rom.
I need your feedback and tell me how it is working
Post here if there are bugs
How to flash- complete gude here
Development stopped temporarily!
will be continued at a later stage
most stable version --cm-7.2.0-20130125-STABLE-ajay ​
Credits
Squadzone for the base rom
Raman Venmarathoor for modifying squadzone kernel
willingmagic for his cyanogenmod 7 release (some stuff wer used from his rom)
TearsDontFalls for the tutorial to re-odex rom
Peteragent5 for the tutorial to port rom
tass and other members of his team for official cyanogenmod 7.2 for galaxy mini
Adrenaline™ Engine thread

About Changelogs
25-01-13
two stable versions are uploaded.
changes.!
some performance improvements .
Roms:
1. cm-7.2.0-20130125-STABLE-ajay is normal one., in which you can S2E or link2sd or any memory scripts.
2. cm-7.2.0-20130125-STABLE-ajay-sdext have an inbuilt memory script, you need to have an sd-ext4 partition. it will increase your usable memory. uninstall or remove all other memory scripts before using this !!. it works better than S2E. you can check your internal memory
16-10-2012
nightly
04-10-2012
new stable cm 7.2
camera picture and video orientation fixed
some perfomance improvements
19-9-2012
new nightly with different base rom.
maybe faster than previous rom
17-9-2012
new nightly with performance improvements
Adrenaline™ Engine
Increase touchscreen sensitivity
Less RAM usage through zipalign. | World first smart zipaligning
Reduced /dbdata, /data, /sdcard usage of *.db files and faster database access.
Faster disk access through remount script (noatime, disabled barrier etc)
Better network throughput from TCP tweaks and 3G tweaks
Tons of prop tweaks
Overall Better Performance and Battery Life
Less lags through LMK Tweak and Various VM Tweaks
Faster SDCARD Read/Write Speed
Click to expand...
Click to collapse
10-9-2012
new nightly uploaded
no more rom manager
bugs in CyanMobile by squadzone have been fixed and uploaded.
2-9-2012
new nightly uploaded
cangelog 31-8-2012
video playback fixed in both nightly and stable.
stable is most stable release of cm7 which is cm7.2.0
Official Cyanogenmod 7 changelog can be found here:- Link
Device specific changelogs can be found on following site(cangelog for galaxy mini is same as our device link
You can find the official Google apps here:- link or link
Clockwork Mod Recovery for our device(by WillingMagic):- link
Stock roms -here
indonesian users can flash this using CWM for key board fix.i dont know who made it any way thanks - link

which should i donload stable one or nightly?
and one more thing
want your permissions to use it for my miui gb please

actually i dint ask any permision from the developers.Is it necessary?
ya you can make miui port.i was thinking of doing it myslf
and you can both . i think both are stable.nightly will have more features.
see cm7.2 changelogs
John XDA fan said:
which should i donload stable one or nightly?
and one more thing
want your permissions to use it for my miui gb please
Click to expand...
Click to collapse

Thanks a lot ! But I'm too noobish to understand fully how to flash with this sentence :
ajay.al said:
Flash using CWM made by willing magic for gingerbread bootloader
Click to expand...
Click to collapse
Where can we download it ?
Will it work if I install this from Arkas 1.6 ?

bug
found one bug while playing video
only hear audio and movie is stuck
means audio is playing smoothly but no motions in picture

video is playing slow.i noted just now.
let me see

mll2 said:
Thanks a lot ! But I'm too noobish to understand fully how to flash with this sentence :
Where can we download it ?
Will it work if I install this from Arkas 1.6 ?
Click to expand...
Click to collapse
1.flash any gingerbread stock using odin
2.flash CWMgb using odin from willing magic
3.put this rom in sd card and go to recovery (power+t)
4.install zip from sdcard
5.wipe data and cache.
reboot

ajay.al said:
1.flash any gingerbread stock using odin
2.flash CWMgb using odin from willing magic
3.put this rom in sd card and go to recovery (power+t)
4.install zip from sdcard
5.wipe data and cache.
reboot
Click to expand...
Click to collapse
Thanks. Is it OK if I use the version of CWM linked at https://galaxy551.wordpress.com/2011/12/09/clockworkmod-5-0-2-6-a-x-guide/ ?

mll2 said:
Thanks. Is it OK if I use the version of CWM linked at https://galaxy551.wordpress.com/2011/12/09/clockworkmod-5-0-2-6-a-x-guide/ ?
Click to expand...
Click to collapse
that will do. gingerbread one

video bug fixed
i have fixed the video bug. it will be uploaded soon

I am currently running CM 7.2 RC1 by WillingMagic, and noticed that Willing said on Twitter that support for the 551 is being dropped since he doesn't have this phone anymore. So, I decided to look for other roms. And ran into... THIS! a stable Cyanogenmod rom, what a surprise. The question, therefore would be, as I'm currently running WillingMagic's Cyano port, do I have to wipe data whenever I flash this one? I ask this because I've read that when flashing from one build of cyanogen to another there's no need to wipe data. But since these are different ports... There's no harm in asking!
Thanks in advance.

Thanks will try it asap.....
Sent from my Transformer TF101

i think there will not be any problem if you didnt clear cache and data..

Great work ajay everything seems to be working will report any issues that I find...
Thanks
Sent from my GT-I5510 using Tapatalk 2

This is too much greatness... Didn't test everything, but so far, it's the smoother I've ever had in this phone.
Ajay, thanks a lot.

Cool, now I gotta dig out my 5510 and check this out.
EDIT: Wow, the nightly version is definitely very zippy. Never would have though the I5510 could be this quick.
EDIT#2: It's good that you leave overclocking to the users. I tried setting 806MHz but it froze when I locked and then tried to unlock it.

The function automatic brightness doesn't work... but it is a very good Rom.
BTW: Now released CM10 for Galaxy Mini ,can you port it?
Sent from my GT-I5510 using xda app-developers app

i have problems with internet connection in my college . so it will take time . and cm10 porting will be difficult
i will try.

I will try this rom Will post for feedback and found bug.
---------- Post added at 10:49 AM ---------- Previous post was at 10:40 AM ----------
I hope you will continue the dev for cm9 by willing
EDIT : i read in our google group that there is a problem with this rom in link2sd.?
Or we can still use the link2sd to transfer the app in sd

[ROM] [PORT] Mooke OS for Callisto aka Galaxy 551

New Build Mokee osV2 final... coming soon
MOKEE OS
Hi! Again Mooke OS Port is Here for Callisto
i Port this rom for here link
SCREEN SHOTS..!! IN THE ATTACHMENTS
FEATURES.!!
-
Mokee Based - So lot of Options Built In
- Lightweight Keyboard (Multiling Keyboard)
-New 360 Launcher-HOT
-After install set ex contact and dialer as default
-App2sd patched Link
- Lewa's FM Radio Function
- Dark Blue Mi File Explorer
- MiUi AND Cm7 Camera
-Very Good Memo App
-ADDED MANY SCRIPTS FOR BATTERY AND TOUCH RESPONSE
-Very Good Battery Management App and many More
TIPS
- Enable both 16 Bit Transparancy and Allow Purging of Assets...
- Fix Permission after installation
Click to expand...
Click to collapse
BUGS AND ERRORS!!!
-APP2Sd Patch Link
-TILL NOW NOTHING EXCEPT FEW CHINESE WORDS IN SETTING LIKE CPU OVERCLOCK.
-FOR THIS USE NO-FRILLS..!!
-IT WILL TAKE 5 MINS TO BOOT DONT PANIC.
Working:
Swipe notifications(HOT)
Swipe settings
3D and 2D rendering
Boot successfully
Keyboard
Overclock
Camera
Bluetooth
WiFi
Very smooth
Nearly everything else
FLASH INSTRUCTIONS..
-DOWNLOAD THE ROM
-MOVE TO UR SD CARD
-REBOOT AND GO TO CWM
-DATA WIPE/CLEAR CACHE/CLEAR DALVIK-CACHE
-APPLY ZIP
-Mooke_os CallTST1.zip
-FLASH GAPPS
-AGAIN DATA WIPE/CLEAR CACHE
-REBOOT
How to flash App2sd patch..!
-mount data,system in cwm
-flash patch
-Reboot ( IT WILL REBOOT TWICE) DONT PANIC..!
Click to expand...
Click to collapse
THANX AND CREDITS
Ajay Base Rom
Mooke Os Rom for Fit by arhant
Mokee creators!
AND OF COURSE ME FOR PORTING IT FOR Callisto
Also Check Out my New Lewa Os Post (Stable Version)
Xperialized For CallistoNow Avaliable For Download
IF YOU LIKE MY WORK PLZ HIT THNX BUTTON..

ScreenShot
HereAre Some ScreenShot and Link
Link for the Rom : Build 1

now downloading first thanks anvesh!!!

Great rom anvesh...even better than ur joyOS this time...much option here in mokeeOS...
Also keybourd is looking good...u should add ss of it...
And thanks again for ur kind work for our device...
Sent from my GT-I5510 using xda premium

priyesh103 said:
Great rom anvesh...even better than ur joyOS this time...much option here in mokeeOS...
Also keybourd is looking good...u should add ss of it...
And thanks again for ur kind work for our device...
Sent from my GT-I5510 using xda premium
Click to expand...
Click to collapse
Thanks but i am also working for my callisto also but sharing my work only

anveshparashar said:
Thanks but i am also working for my callisto also but sharing my work only
Click to expand...
Click to collapse
Here small issue with this rom...if u notice than when we type words by physical and touch keypad than sometime words are not display on screen....
Edited:
Keyboard backlight is not working...
Sent from my GT-I5510 using xda premium

You are AWESOME!!!
Thank you so so so much!!!!!! great ROM!!! :good: :laugh:
It's ppl like you that want me to continue using this phone!
btw, one small help? i am new to this porting business.. i was trying to extract ajay's JB (cm 10) rom for using it as the base rom!
i am having problems during the extraction, probably the zip was not archived properly, is there any work around for this?
Thanks in advance!!

vvaklnprm said:
Thank you so so so much!!!!!! great ROM!!! :good: :laugh:
It's ppl like you that want me to continue using this phone!
btw, one small help? i am new to this porting business.. i was trying to extract ajay's JB (cm 10) rom for using it as the base rom!
i am having problems during the extraction, probably the zip was not archived properly, is there any work around for this?
Thanks in advance!!
Click to expand...
Click to collapse
ajay jb.zip as double named files such that on extracting they displace each other due to similar name it is due to addition of file in zip after compilation as for now cm7 is the most stable version

Cm10 zip
Good job! great rom.
If you want to extract cm10 you have to use linux, because for windows folder ''a'' and folder ''A'' is the same name.
bye

CM 10 ??
a lot of cm 7.2 roms have come recently..
will cm 10 roms come soon??

R: [ROM] [PORT] Mooke OS for Callisto aka Galaxy 551
I'm working on aokp...
Inviato dal mio GT-I5510 con Tapatalk 2

Wait till march
vvaklnprm said:
a lot of cm 7.2 roms have come recently..
will cm 10 roms come soon??
Click to expand...
Click to collapse
I m currently working for Stable CyanogenMod 10.1 for our Device

Waiting for its release....
Sent from my GT-I5510 using xda premium

please add soft button to status bar like in jellybread

Hi man,
I have tryed some of your Roms and i like much the interface but i wanted to ask you, do anyone supports ext4 and swap ?

brick?
I tried to flash the rom on my rooted callisto, but since then i´m stuck in a screen it say "indonesia cyanmobile squadzone"...it doesn`t seem to boot through......recovery is still there....any chance to "unbrick" it?
Got it fixed with ODIN an a proper official Firmware...and back to root try to start over tomorrow... any suggestions what was wrong ? i really would like to have this rom

Hondologe said:
I tried to flash the rom on my rooted callisto, but since then i´m stuck in a screen it say "indonesia cyanmobile squadzone"...it doesn`t seem to boot through......recovery is still there....any chance to "unbrick" it?
Got it fixed with ODIN an a proper official Firmware...and back to root try to start over tomorrow... any suggestions what was wrong ? i really would like to have this rom
Click to expand...
Click to collapse
1.have you fixed permission,cleared data cache etc....
2.which rom you are on
3.please make a nandroid before..
4.use the ajay cyanogenmod build 20121005 i find it most stable (my preference). all my build are based on it
5.if you downloaded corrupted zip test the zip for error
6. which version of cmw you use...they are two 5.xx.6 and 5.xx.8 i found .6 with usb mount faulty but nandroid backup is best and .8 with usb mount but i get nandroid restore faulty about 5/100 times
7.specific device error can also occur....

1
i got it ..THX

anveshparashar said:
1.have you fixed permission,cleared data cache etc....
2.which rom you are on
3.please make a nandroid before..
4.use the ajay cyanogenmod build 20121005 i find it most stable (my preference). all my build are based on it
5.if you downloaded corrupted zip test the zip for error
6. which version of cmw you use...they are two 5.xx.6 and 5.xx.8 i found .6 with usb mount faulty but nandroid backup is best and .8 with usb mount but i get nandroid restore faulty about 5/100 times
7.specific device error can also occur....
Click to expand...
Click to collapse
Right now im on Stock 2.3.6 with root...i also think i don`t have cwm..seems to be stock recovery...how can i install the cwm recovery?
Will this CWM work on the callisto? "CLOCKWORKMOD 5.0.2.6" (got it from here: http://galaxy551.wordpress.com/2011/12/09/clockworkmod-5-0-2-6-a-x-guide/)

Hondologe said:
Right now im on Stock 2.3.6 with root...i also think i don`t have cwm..seems to be stock recovery...how can i install the cwm recovery?
Will this CWM work on the callisto? "CLOCKWORKMOD 5.0.2.6" (got it from here: http://galaxy551.wordpress.com/2011/12/09/clockworkmod-5-0-2-6-a-x-guide/)
Click to expand...
Click to collapse
ya download the didy version and follow the instructions .....to flash....

WorkAround: MultiRom + Kernel Panic on Secondary Rom

Not sure if im posting in correct area,
If Posted in wrong area, my Bad..
Ever since MultiRom come out for D851, People have been experiencing Kernel panics with the latest updates from the CM Sources. (Not everyone, But Most)
The method I used below has worked with no problems with me. I cant say it will work with everyone. But it worked for me..
I know installing a Full Kernel ZIP file on secondary rom can either take 45 mins or longer, or not even work at all. (My Experience.)
But the method listed below, only took 5 secs and worked perfectly..
Now I just wanted to post a work around for the people that are experiencing Kernel Panics when using MultiRom..
Example: you install CM-12 as a secondary rom, Reboot and it crashes with Kernel Panic,
Work around: This awesome Kernel: Optimized SM-4.9.3 Kernel V2.2 for D855/D851/D850/LS990 http://forum.xda-developers.com/lg-g3/development/kernel-optimized-sm-4-9-3-kernel-t2976049
Take that kernel and unzip file. Then in Multi rom settings in TWRP-MultiRom goto list roms.. Pick the Rom with the kernel panic and Then remove Boot image..
click on the add boot image now.. and then goto the unziped kernel from above, Find the boot.img and click on it.. it will add it.. takes only a few secs.
Reboot.. Kernel panic is now gone..... (Becides, that Kernel works great)..
Note: that above example is for Lollipop only.. I havent tested it with any other kernels.. Most kernels that I unziped had that bump stuff listed for the locked bootloaders.
and no correctly listed boot.img So.. it wouldnt work...
You can also Make a Backup of your current working boot image and then flash that into it, Havent testing it like that, but should work the same.
The other work around I heard posted is:
Install to primary ROM then move to secondary rom.

Thank you for this. I have been flashing RIN kernel after any cm12 I've installed since installing MultiROM. Seems to work too, but the hour long wait to flash a 7mb kernel really bugs me.
Next time I flash a cm12 as secondary I'll give this a go.

Eliminater74 said:
Not sure if im posting in correct area,
If Posted in wrong area, my Bad..
Ever since MultiRom come out for D851, People have been experiencing Kernel panics with the latest updates from the CM Sources. (Not everyone, But Most)
The method I used below has worked with no problems with me. I cant say it will work with everyone. But it worked for me..
I know installing a Full Kernel ZIP file on secondary rom can either take 45 mins or longer, or not even work at all. (My Experience.)
But the method listed below, only took 5 secs and worked perfectly..
Now I just wanted to post a work around for the people that are experiencing Kernel Panics when using MultiRom..
Example: you install CM-12 as a secondary rom, Reboot and it crashes with Kernel Panic,
Work around: This awesome Kernel: Optimized SM-4.9.3 Kernel V2.2 for D855/D851/D850/LS990 http://forum.xda-developers.com/lg-g3/development/kernel-optimized-sm-4-9-3-kernel-t2976049
Take that kernel and unzip file. Then in Multi rom settings in TWRP-MultiRom goto list roms.. Pick the Rom with the kernel panic and Then remove Boot image..
click on the add boot image now.. and then goto the unziped kernel from above, Find the boot.img and click on it.. it will add it.. takes only a few secs.
Reboot.. Kernel panic is now gone..... (Becides, that Kernel works great)..
Note: that above example is for Lollipop only.. I havent tested it with any other kernels.. Most kernels that I unziped had that bump stuff listed for the locked bootloaders.
and no correctly listed boot.img So.. it wouldnt work...
You can also Make a Backup of your current working boot image and then flash that into it, Havent testing it like that, but should work the same.
The other work around I heard posted is:
Install to primary ROM then move to secondary rom.
Click to expand...
Click to collapse
Or you can try the tootsie-pop test kernel. I implemented the multirom patch into it tonight. If everything works fine it'll be been bumped into the stable kernel and be included with bliss pop and Resurrection remix ROMs.

aclegg2011 said:
Or you can try the tootsie-pop test kernel. I implemented the multirom patch into it tonight. If everything works fine it'll be been bumped into the stable kernel and be included with bliss pop and Resurrection remix ROMs.
Click to expand...
Click to collapse
Yes from what I have tested it works with any Compatible flashable Kernel that unzips and has a boot.img..
The above kernel that I listed on post #1 is Stable but is overclockable, If you dont want that.. Then dont use that one, It was only listed as an Example.
I use that kernel with no problems.. I dont OC my phone, but its nice to have the option to do so.
Ill test out the tootie-pop kernel the next time I feel like messing with my phone.
Now isnt a good time, Im sick, and I have already messed up my linux system and my windows system (windows 10 Enterprise build 9926).. Had to do a fresh install on windows.. my linux doesnt want to let me mount my own drives in gnome.. Says I dont have access do to some error, But I am running Ubuntu Vivid 15.04.. so thats to be expected..
So touching my phone isnt a good idea right now.. I might just end up blowing it up the way my luck is going.

Thanks to the OP. This was a quick and simple fix to a frustrating issue.
Sent from my LG-D851

After doing a little research, and finding out that the MultiRom is pretty much dead. I decided to delete it all together and stick with the one rom that seemed
very stable and likable for me. I wont say what rom that was as to respect all developers on this forum.. So I stopped all testing and experiments dealing with MultiRom..
If the Developer once again decides to post updates and fixes. I will again. try it.. but for now.. I will no longer post any workarounds or help with this MultiRom section anymore...
As you know that thread was closed in the ROM Development section..

[KERNEL] -> tegra-3.18_unified_dragon_kernel_11_v201218 (DISCONTINUED)

Due to several reasons I have stopped the deployment of the "monthly Update.Zip packages" !
Thanks for your understanding.
This thread will be used for the unified tegra-3.18 kernel only.
Twelve:
tegra-3.18_unified_dragon_kernel_12_v211213.zip
Eleven:
tegra-3.18_unified_dragon_kernel_11_v201218.zip
Ten:
tegra-3.18_unified_dragon_kernel_10_v201010.zip
Pie:
tegra-3.18_unified_dragon_kernel_p_v200310.zip
Oreo:
tegra-3.18_unified_dragon_kernel_o_v200310.zip
Changes/Features:
- Upstream to kernel version 3.18.140
- Various patches and security updates
- Added Wireguard support
- Added/Enabled various file systems (exFat, NTFS, Network Filesystems .. etc.)
- Changed kernel config to enable/improve support for varioius services (tethering .. etc.)
- Added "fix cpu frequency limitation"
- etc.
Installation:
1. Boot into TWRP
2. Install the Kernel Update.Zip file
3. Reboot into system .. no need for SuperSU / Magisk !
The package contains an Image.fit kernel binary only - and no ramdisk part !
This way the kernel should run on all available Android Oreo/Pie/Ten ROMs for the dragon device.
And there is no need for a new SuperSu/Magisk installation afterwards, unlike to "full boot.img" installation.
Sources:
https://github.com/followmsi/android_kernel_tegra
https://github.com/followmsi/lazyflasher/tree/followmsi-dragon
https://github.com/followmsi/AnyKernel2/tree/dragon
Download:
https://drive.google.com/drive/folders/18cqluw7lp1S720QdV0p-OtHfY9MNpSwn
Big thanks to @NYCHitman1 (Dirty Unicorn), @cheep5k8 (xceed), @Vartom and updateing from Team Mokee for the nice kernel sources !
Big thanks to @osm0sis (Anykernel2) and @jcadduono (lazyflasher) for the nice tools !
Enjoy

flashed your system image
devices does not boot
flashed back to stock
boots
edit: further details
every boot just dumps me into recovery.

dmitrygr said:
flashed your system image
devices does not boot
flashed back to stock
boots
edit: further details
every boot just dumps me into recovery.
Click to expand...
Click to collapse
Thanks for feedback .. no good news.
Sorry, I can not reproduce your problem.
Tested the system_vendor udapte.zip several times on my Pixel C.
No problem so far ...
You flashed the complete .zip via TWRP ?
What was your previous firmware level ?
Did you upgrade bootloader as well ?
What kernel do you have in use ?
EDIT:
Which Version of TWRP ?
Pls use xceed version for now.
The NYChitman1 version seems to have problems.
http://forum.xda-developers.com/pix...ock-bootloader-install-custom-t3307183/page14

followmsi said:
The NYChitman1 version seems to have problems.
http://forum.xda-developers.com/pix...ock-bootloader-install-custom-t3307183/page14
Click to expand...
Click to collapse
Only the latest one I released because I didn't put the proper flag in place -- the previous one works perfectly fine as indicated by myself and others.
Also, I find it interesting that you've created a development thread while you aren't actually developing anything.

Thanks for the update.
Still like to test your version.
Ok, the version from here is recommended .. http://forum.xda-developers.com/showpost.php?p=66557703&postcount=101
In the one from yesterday you fixed vendor image flashing via TWRP.. sounds nice.
When do you re-release this version ?
You may open a new thread for your TWRP releases ..
Thanks a lot for all your work!

New kernel released ... pls test
Update.ZIP_Nexus_Ryu_chromeos-3.18-kernel_v160519_followmsi.zip
There are lot of changes in compare to latest stock kernel .. https://chromium.googlesource.com/chromiumos/third_party/kernel/+log/chromeos-3.18/
Cheers

followmsi said:
New kernel released ... pls test
Update.ZIP_Nexus_Ryu_chromeos-3.18-kernel_v160519_followmsi.zip
There are lot of changes in compare to latest stock kernel .. https://chromium.googlesource.com/chromiumos/third_party/kernel/+log/chromeos-3.18/
Cheers
Click to expand...
Click to collapse
Many thanks for your work The kernel is for stock / AOSP roms? Running Dirty Unicorns and I think it´s not compatible :/

redukt said:
Many thanks for your work The kernel is for stock / AOSP roms? Running Dirty Unicorns and I think it´s not compatible :/
Click to expand...
Click to collapse
There are so many fixes since MXC89F kernel .. which was commited on Arpil 5th .. even it's the May release. Ok, was tagged on May, 4th.
https://chromium.googlesource.com/chromiumos/third_party/kernel/+/MXC89F
Last changes .. 6 weeks ..
https://chromium.googlesource.com/c...+log/9c052efad6e651d33334b84c8f1feaf8945e8e7a
I am running the new kernel on latest M stock release .. MXC89F.
No problems so far .. really stable.
The kernel should run on all stock M releases for PixelC.
Used latest stock ramdisk to build the kernel .. maybe the dirty unicorn ramdisk is different.
But the actual kernel should work as well ..it's a dragon kernel.
Repack DU ramdisk with my kernel and it will most probably work as well .. maybe even with the same ramdisk, without repacking. Needs to be tested ..
Give it a try .. it will not hurt.
Cheers

Any chance of getting a port of multirom? Let me know if there's any interest, and what I can do to help.

nic. said:
Any chance of getting a port of multirom? Let me know if there's any interest, and what I can do to help.
Click to expand...
Click to collapse
Sounds good .. have it running on Nexus 7 flo .. really like it.
MultiROM for PixelC would be really nice .. the chromeos is part is maybe tricky.
But like SuperSU .. automatic chromeos image unpack and repack, if required at all.
It seems Tassadar is not around anymore .. not sure if he will come back.
Some new guys have taken over .. they just made a new update release for TWRP and MultiROM..
Works fine
Are you able to port it to Pixel C ?
Thanks

followmsi said:
Give it a try .. it will not hurt.
Cheers
Click to expand...
Click to collapse
Bootloop
Restored my Nandroid and device is up
DU is CM based and unfortunately incompatible :/

followmsi said:
Sounds good .. have it running on Nexus 7 flo .. really like it.
MultiROM for PixelC would be really nice .. the chromeos is part is maybe tricky.
But like SuperSU .. automatic chromeos image unpack and repack, if required at all.
It seems Tassadar is not around anymore .. not sure if he will come back.
Some new guys have taken over .. they just made a new update release for TWRP and MultiROM..
Works fine
Are you able to port it to Pixel C ?
Thanks
Click to expand...
Click to collapse
I am wanting to dig into the Linux4Tegra side of this, and was hoping that some of the work for multirom could or had been done. I don't know anything about the chromeos bootloader. Looking into it, Chrubuntu might be a viable path for this. I feel like this device is gimped with Android.

redukt said:
Bootloop
Restored my Nandroid and device is up
DU is CM based and unfortunately incompatible :/
Click to expand...
Click to collapse
Thanks for the test ..
Restore DU boot.img and you are back to normal ..yep
I will unpack the DU boot.img and have short look .. just to check it.

nic. said:
I am wanting to dig into the Linux4Tegra side of this, and was hoping that some of the work for multirom could or had been done. I don't know anything about the chromeos bootloader. Looking into it, Chrubuntu might be a viable path for this. I feel like this device is gimped with Android.
Click to expand...
Click to collapse
Sounds like a lot of work .. but if you have the right people involved ..
Maybe xceed or nychitman will know better how to "manage" the bootloader ..
As I know, until today, "nobody" knows how to remove the 30 second warning time beep sound ****.
Right now I am happy to "manage" the layer above .. boot.img and recovery.img

redukt said:
DU is CM based and unfortunately incompatible :/
Click to expand...
Click to collapse
What are you talking about? We're not CM based.
followmsi said:
There are so many fixes since MXC89F kernel .. which was commited on Arpil 5th .. even it's the May release. Ok, was tagged on May, 4th.
https://chromium.googlesource.com/chromiumos/third_party/kernel/+/MXC89F
Last changes .. 6 weeks ..
https://chromium.googlesource.com/c...+log/9c052efad6e651d33334b84c8f1feaf8945e8e7a
I am running the new kernel on latest M stock release .. MXC89F.
No problems so far .. really stable.
The kernel should run on all stock M releases for PixelC.
Used latest stock ramdisk to build the kernel .. maybe the dirty unicorn ramdisk is different.
But the actual kernel should work as well ..it's a dragon kernel.
Repack DU ramdisk with my kernel and it will most probably work as well .. maybe even with the same ramdisk, without repacking. Needs to be tested ..
Give it a try .. it will not hurt.
Cheers
Click to expand...
Click to collapse
I had been keeping up with the chromeos-3.18 branch upstream, but I realized that a majority of the commits do not even apply to Dragon -- so it wasn't all that worthwhile to have in the majority of cases. With that said, I decided to go back to the MXC89F source until the next batch of source is released in June.

NYCHitman1 said:
What are you talking about? We're not CM based.
Click to expand...
Click to collapse
Well my bad...DU is AOSP based. I get mixed up with all several custom roms on my devices :silly:

NYCHitman1 said:
What are you talking about? We're not CM based.
I had been keeping up with the chromeos-3.18 branch upstream, but I realized that a majority of the commits do not even apply to Dragon -- so it wasn't all that worthwhile to have in the majority of cases. With that said, I decided to go back to the MXC89F source until the next batch of source is released in June.
Click to expand...
Click to collapse
You are right .. there also many fixed not relevant for dragon at all.
But it´s a fresh kernel .. upstream
I was so free .. and made a new DU kernel now .. used your ramdisk and my fresh chomeos-3.18 build from today.
@redukt, please test this kernel again .. on DU
Update.ZIP_PixelC_Ryu_chromeos-3.18-kernel_DU_v160519_followmsi.zip
https://onedrive.live.com/?authkey=!ABLdSOKIeXgg_XU&id=479EB75F5DD9DA59!117&cid=479EB75F5DD9DA59
Thanks .. still bootloop ?

redukt said:
Well my bad...DU is AOSP based. I get mixed up with all several custom roms on my devices :silly:
Click to expand...
Click to collapse
Please test this one ... Update.ZIP_PixelC_Ryu_chromeos-3.18-kernel_DU_v160519_followmsi.zip
https://onedrive.live.com/?authkey=!ABLdSOKIeXgg_XU&id=479EB75F5DD9DA59!117&cid=479EB75F5DD9DA59
Thanks !

followmsi said:
Please test this one ... Update.ZIP_PixelC_Ryu_chromeos-3.18-kernel_DU_v160519_followmsi.zip
https://onedrive.live.com/?authkey=!ABLdSOKIeXgg_XU&id=479EB75F5DD9DA59!117&cid=479EB75F5DD9DA59
Thanks !
Click to expand...
Click to collapse
!!! Device is booting!!!
Meh... forget to install SU lol.... Will have a look in kernel auditor
Many thanks
edit: I have to flash the latest supersu (beta v2.74-2) to get root again. Will test your kernel til the next DU weeklie as dd. I´ll have a look at the frequency overview and kept stock settings / governor. System runs fluid with no hickups or so. Great work!

Looks also very interessting ..stabilize-smaug-7897.B-chromeos-3.18
https://chromium.googlesource.com/c...kernel/+/stabilize-smaug-7897.B-chromeos-3.18
Will see .. today they released the 3rd N preview ... maybe it´s time for some N testing.
As I understand correct .. using N ramdisk and the same kernel from today should work on N as well.
We will see ...
Cheers