Related
People,
I got to install the Cyanogen Firmware on my Xperia ZL (6503) and i'm give a problem.
I follow the instructions on the http://wiki.cyanogenmod.org/w/Install_CM_for_odin
and download the file cm-10.1.2-odin.zip in this page:
http://download.cyanogenmod.org/?type=stable&device=odin
When I select the option Factory Default, the CWM show the message: Error Mounting /sdcard/.android_Secure! and no mount the internal sdcard. I'm install the .zip file from the external sdcard, and stuck on logo of Cyanogen.
Any fix for this error?
Do you mean you are unable to perform a factory reset? You can do this without using CWM. Inside of the phone settings, backup & restore, there is an option to reset to factory.
If you mean you are unable to install the zip, then maybe you need to install a different version of recovery.
ryude said:
Do you mean you are unable to perform a factory reset? You can do this without using CWM. Inside of the phone settings, backup & restore, there is an option to reset to factory.
If you mean you are unable to install the zip, then maybe you need to install a different version of recovery.
Click to expand...
Click to collapse
Humm, i'm not do factory reset before install the Cyanogenmod. I'm install the boot.img with CWM provided with cyanognen file. What's the difference do factory reset directly in original rom?
hudfer said:
Humm, i'm not do factory reset before install the Cyanogenmod. I'm install the boot.img with CWM provided with cyanognen file. What's the difference do factory reset directly in original rom?
Click to expand...
Click to collapse
Ah you're attempting to flash the boot.img file? You have to use fastboot I believe in order to flash it.
1. You must have unlocked bootloader of your device. You can do so from here.
2. Download Fastboot here.
3. Place Fastboot.zip and the boot.img files onto your Desktop.
2. Extract files from the Fastboot archive to your Desktop. Move the boot.img file into the Fastboot folder.
3. Turn ON the USB debugging option on your device by going to Menu>>Settings>>Developer options>>USB debugging.
4. Once enabled, connect your device to your PC via USB cable.
5. Launch a Command Prompt Window on the Desktop of your PC. To do so, press and hold the Shift button on your keyboard and right-click on any blank area on the screen, then choose Open command window here.
6. Type in following command into the Command Prompt Window:
adb reboot bootloader
7. Your device will reboot into the bootloader mode.
8. Once inside bootloader mode, enter the following command into Command Prompt.
fastboot flash boot boot.img
9. Once the file’s flashed, reboot your device.
10. And you’re all set! You now have CWM recovery!
ryude said:
Ah you're attempting to flash the boot.img file? You have to use fastboot I believe in order to flash it.
1. You must have unlocked bootloader of your device. You can do so from here.
2. Download Fastboot here.
3. Place Fastboot.zip and the boot.img files onto your Desktop.
2. Extract files from the Fastboot archive to your Desktop. Move the boot.img file into the Fastboot folder.
3. Turn ON the USB debugging option on your device by going to Menu>>Settings>>Developer options>>USB debugging.
4. Once enabled, connect your device to your PC via USB cable.
5. Launch a Command Prompt Window on the Desktop of your PC. To do so, press and hold the Shift button on your keyboard and right-click on any blank area on the screen, then choose Open command window here.
6. Type in following command into the Command Prompt Window:
adb reboot bootloader
7. Your device will reboot into the bootloader mode.
8. Once inside bootloader mode, enter the following command into Command Prompt.
fastboot flash boot boot.img
9. Once the file’s flashed, reboot your device.
10. And you’re all set! You now have CWM recovery!
Click to expand...
Click to collapse
Thank's for the explanation, but i'm have executed all the commands described by you and not work. Is the same commands on cyanogen wiki page. The CWM appears the same error and i'm install the cyanogen, but stucks in logo and the android is not start.
hudfer said:
Thank's for the explanation, but i'm have executed all the commands described by you and not work. Is the same commands on cyanogen wiki page. The CWM appears the same error and i'm install the cyanogen, but stucks in logo and the android is not start.
Click to expand...
Click to collapse
You should flash a stock FTF image using Flashtool. After you have completed this, you can try again.
ryude said:
You should flash a stock FTF image using Flashtool. After you have completed this, you can try again.
Click to expand...
Click to collapse
After hours of research, I resolved the problem. I`m followed the steps described on cyanogen wiki, adding the first step Factory Restore on original sony firmware and the problem persists. After launched the CWM, I select the option "Format /data" and after "Format /sdcard". After selected this options, the error message not appears again and the Cyanogen firmware install and launch successful! Probably with format, deleted some key or protection in internal sdcard. Thanks for the help!
hudfer said:
After hours of research, I resolved the problem. I`m followed the steps described on cyanogen wiki, adding the first step Factory Restore on original sony firmware and the problem persists. After launched the CWM, I select the option "Format /data" and after "Format /sdcard". After selected this options, the error message not appears again and the Cyanogen firmware install and launch successful! Probably with format, deleted some key or protection in internal sdcard. Thanks for the help!
Click to expand...
Click to collapse
I'm happy you were able to resolve your problem. How are you liking CyanogenMod so far?
ryude said:
I'm happy you were able to resolve your problem. How are you liking CyanogenMod so far?
Click to expand...
Click to collapse
The Cyanogen is always incredible, i'm use this custom rom since my Galaxy S2. The rom is very fast and clean. I most like in this version, the option "Expand Desktop", in particular opinion, the best configuration on the rom.
hudfer said:
The Cyanogen is always incredible, i'm use this custom rom since my Galaxy S2. The rom is very fast and clean. I most like in this version, the option "Expand Desktop", in particular opinion, the best configuration on the rom.
Click to expand...
Click to collapse
I'm have a first problem with full screen mode: the game "Kingdom Rush" not launch.
does not work for me
hudfer said:
After hours of research, I resolved the problem. I`m followed the steps described on cyanogen wiki, adding the first step Factory Restore on original sony firmware and the problem persists. After launched the CWM, I select the option "Format /data" and after "Format /sdcard". After selected this options, the error message not appears again and the Cyanogen firmware install and launch successful! Probably with format, deleted some key or protection in internal sdcard. Thanks for the help!
Click to expand...
Click to collapse
Hi,
I have the same issue, but after trying: "Format /sdcard" I get "Error formatting /sdcard!"
Please help! I'm researching 2 days in a row and can't find a solution.
flutur said:
Hi,
I have the same issue, but after trying: "Format /sdcard" I get "Error formatting /sdcard!"
Please help! I'm researching 2 days in a row and can't find a solution.
Click to expand...
Click to collapse
you just format your sdcard as FAT32, that's how i solved my problem
Same problem in Razr 925
ShanksVo said:
you just format your sdcard as FAT32, that's how i solved my problem
Click to expand...
Click to collapse
I have the same problem in my Razr 925. I installed with CWM 6.0.3.6-10.2 cm from the external SD.
1) First I tried from the inside SD, I never realized that appeared "Warning: No file_contexts", and install the zip of cm-10.2, the result was "Error mounting / data" "Error mounting / sdcard /. Android_secure".
2) From the external memory I managed to do it, but the logo remains Cyanogen cycling.
3) I tried to restore the backup, but "Can not mount / sdcard".
Now I don't know what to do, I researched and solution is always restart from the official android, in my case I can not start the official android. I need help please !:crying:
If you don't want to format your SD-card
flutur said:
Hi,
I have the same issue, but after trying: "Format /sdcard" I get "Error formatting /sdcard!"
Please help! I'm researching 2 days in a row and can't find a solution.
Click to expand...
Click to collapse
If you aren't able to (as in your case) or simply don't want to (as in mine, where I didn't have an external SD card handy); you can simply upgrade your recovery software.
In my case, Carbon ROM JB for the GT-N7000 came with CWM 6.0.3.5 which couldn't flash newer ROMs (like Carbon KitKat), and had issues with the internal SD card including the one in the topic of this post. Since I had just wiped my current ROM and didn't want to start up an ADB sideload session, I simply flashed PA (which came with CWM 6.0.3.7, a minor version bump but a huge difference here) and after rebooting to recovery again (I didn't even have to boot to PA), everything worked again.
(My first post that could be even considered remotely useful on XDA, so please tell me if it helped you!)
Thanks!
hudfer said:
After hours of research, I resolved the problem. I`m followed the steps described on cyanogen wiki, adding the first step Factory Restore on original sony firmware and the problem persists. After launched the CWM, I select the option "Format /data" and after "Format /sdcard". After selected this options, the error message not appears again and the Cyanogen firmware install and launch successful! Probably with format, deleted some key or protection in internal sdcard. Thanks for the help!
Click to expand...
Click to collapse
Finally!
PS: Do -not- try to encrypt your nexus 4 if you put 5.0 on it X(
Today i decided to download a new rom, something i ain't done in a long time, so everything went well, got the rom and kernal installed on my external.
I then went and wiped everything on the phone but went a bit to far and decided to go into advanced and wipe dalvik cache, cache, system, data, internal storage and external SDcard. so after this was done, i went into the SD card to install the new rom, but nothing is there, the entire folder is clear.
so now when i try to turn my phone off, i get a message come up saying 'no OS installed! are you sure you wish to reboot.
When i connect my phone to my computer so that i can transfer over the files again, my phone aint coming up anymore.
what can i do?
i prey someone knows a way around this.
MrLarner said:
Today i decided to download a new rom, something i ain't done in a long time, so everything went well, got the rom and kernal installed on my external.
I then went and wiped everything on the phone but went a bit to far and decided to go into advanced and wipe dalvik cache, cache, system, data, internal storage and external SDcard. so after this was done, i went into the SD card to install the new rom, but nothing is there, the entire folder is clear.
so now when i try to turn my phone off, i get a message come up saying 'no OS installed! are you sure you wish to reboot.
When i connect my phone to my computer so that i can transfer over the files again, my phone aint coming up anymore.
what can i do?
i prey someone knows a way around this.
Click to expand...
Click to collapse
Well, those actions did not delete the recovery you flashed so you should be able to enter it. If yes you can:
A) take the sdcard out and copy the data to it on your PC (home/work/friend/cafe?)
B) connect the phone to PC using USB cable:
- on PC start Command Prompt (cmd.exe)
- navigate to the directory where you have the new ROM stored
- enter "adb sideload ROM_filename"
- while at the same time in your recovery enter flashing menu and select Sideload
- you will be able to flash rom
C) enter "Download Mode" (power+home+vol_down) also called Odin Download Mode and use PC Odin to flash some recovery - search for Philz custom recovery, he has versions named something.md5 that are usable to Odin.
mat9v said:
Well, those actions did not delete the recovery you flashed so you should be able to enter it. If yes you can:
A) take the sdcard out and copy the data to it on your PC (home/work/friend/cafe?)
B) connect the phone to PC using USB cable:
- on PC start Command Prompt (cmd.exe)
- navigate to the directory where you have the new ROM stored
- enter "adb sideload ROM_filename"
- while at the same time in your recovery enter flashing menu and select Sideload
- you will be able to flash rom
C) enter "Download Mode" (power+home+vol_down) also called Odin Download Mode and use PC Odin to flash some recovery - search for Philz custom recovery, he has versions named something.md5 that are usable to Odin.
Click to expand...
Click to collapse
My SD Card is a tiny little card, and there is nowhere on my computer to put it. how am i ment to copy the stuff across?
Need to give a HUGE thank you to mat9v on here who spent around 2 hours helping me solve all my problems on my phone.
can't thank him enough. :good::good::good:
Hi guys,
I've been running custom AOKP rom and decided to return back to stock.
I have the rogers version of the M8, and intended to flash a stock TWRP backup of someone's rogers save.
I made the poor decision of relocking and unlocking the bootloader again, leaving me without a functional OS and with only fastboot and TWRP recovery available to me. As a result, I can't get the rogers backup folder onto my phone ( I don't have a miscro SD), and the only other option I see is to manually push each file in the stock TWRP recovery with ADB to my phone, but I'm horrible with anything that involves command lines.
Any suggestions to get me out of this situation would be great. My end goal is to get the stock ROM / kernel running so I can get OTA's.
Edit: Solved by doing an advanced wipe and format in TWRP, and I flashed a stock Rogers nandroid
Just adb push or adb sideload a stock rooted ROM to your phone. Just a single command line.
If you want OTAs, you will also need stock recovery. But my recommendation is that OTAs have no place on a modded device.
redpoint73 said:
Just adb push or adb sideload a stock rooted ROM to your phone. Just a single command line.
If you want OTAs, you will also need stock recovery. But my recommendation is that OTAs have no place on a modded device.
Click to expand...
Click to collapse
I've tried flashing a ROM and unfortunately I get stuck on the boot animation.
Attempting to wipe my phone through TWRP before the zip install yields a failure:
E: Unable to mount '/data'
E: Unable to mount internal storage
Those two lines are repeated a couple times in the error screen.
It looks like I need to flash some form of backup but am not sure which one will hard reset my phone to stock from this scenario.
Flashnova said:
I've tried flashing a ROM and unfortunately I get stuck on the boot animation.
Click to expand...
Click to collapse
Which ROM? How did you try to flash it (how did you get it on the phone, did you adb sideload?)/
Flashnova said:
Attempting to wipe my phone through TWRP before the zip install yields a failure:
E: Unable to mount '/data'
E: Unable to mount internal storage
Click to expand...
Click to collapse
Select "Mount" in TWRP main screen and make sure data is checked (cache should also e checked by default). If so, and still getting this error, di you by chance try to factory reset in bootloader (not TWRP)?
redpoint73 said:
Which ROM? How did you try to flash it (how did you get it on the phone, did you adb sideload?)/
Select "Mount" in TWRP main screen and make sure data is checked (cache should also e checked by default). If so, and still getting this error, di you by chance try to factory reset in bootloader (not TWRP)?
Click to expand...
Click to collapse
I flashed dirty unicorns 4.4.4. I had a 2gb SD card which managed to get it to the phone (the 2gb isn't enough to move the system backup).
I can't check Mount in the settings and it remains unchecked, and yes, I did hit the factory reset in the bootloader thinking that it would help me (I assume this was another bad decision).
Flashnova said:
I can't check Mount in the settings and it remains unchecked, and yes, I did hit the factory reset in the bootloader thinking that it would help me (I assume this was another bad decision).
Click to expand...
Click to collapse
Yes, that was a bad decision. But probably not one that you could have known about. Doing a factory reset in bootloader on a modded M8 corrupts the internal memory. This is your main problem right there.
If you have a Windows PC, connect the phone, go to Device Manager and find the phone. Then select the option to format the memory.
In the future only do a factory reset within the OS (in Settings) or in recovery, not in bootloader.
If you've gone through this much, I'd highly recommend getting comfy with a few command line commands. These may very well save you some time and additional headache (speaking from experience).
After recently running into issues with my newly purchased Roger's M8, I needed to restore to stock as well. Honestly, I followed these instructions to the T and it got me out scrape-free.
But, note Step #6 may require you to "adb push" your unzipped folder. And that's it.
Once you've ADB'd the massive nandroid backup, you should be out of the woods (in TWRP, Restore, Select the pushed backup file).
Good luck, and as long as you've got recovery/hboot looking back at you, you should be fine.
redpoint73 said:
If you have a Windows PC, connect the phone, go to Device Manager and find the phone. Then select the option to format the memory.
Click to expand...
Click to collapse
I'm not too sure where that option is located, would you know how to get there?
esuohe said:
But, note Step #6 may require you to "adb push" your unzipped folder. And that's it.
Once you've ADB'd the massive nandroid backup, you should be out of the woods
Click to expand...
Click to collapse
After pushing the folder to my device I receive "protocol failure", so the push isn't working unfortunately.
Flashnova said:
I'm not too sure where that option is located, would you know how to get there?
Click to expand...
Click to collapse
On Win7, go to Start Menu, use the search function at the bottom that says "Search programs and files" and type "Device Manager".
Or go to Start Menu>Control Panel>Hardware and Sound; and under "Devices and printers" you will see Device Manager.
Flashnova said:
After pushing the folder to my device I receive "protocol failure", so the push isn't working unfortunately.
Click to expand...
Click to collapse
You aren't going to be able to write to the memory when its still corrupt.
redpoint73 said:
On Win7, go to Start Menu, use the search function at the bottom that says "Search programs and files" and type "Device Manager".
Or go to Start Menu>Control Panel>Hardware and Sound; and under "Devices and printers" you will see Device Manager.
Click to expand...
Click to collapse
Device manager does not provide a format option. Perhaps you mean disk manager? If I do format it will I have to somehow reinstall the android system?
Flashnova said:
Device manager does not provide a format option. Perhaps you mean disk manager? If I do format it will I have to somehow reinstall the android system?
Click to expand...
Click to collapse
I've often read it described as Device Manager. Can't personally say from experience as I've never actually had to do it myself, but seen this described on XDA quite a few times. If the option comes up in Disk Management, that should be fine, too.
Formatting internal storage should not affect the Android OS, as its a separate partition (note how Windows is only reading the internal storage as around 25 GB of the total 32 GB). But you have to re-install a ROM anyway, as you presently do not have one installed.
hi all
been searching and searching but doesnt find quite what i am want. so ill ask here.
how can i completely delete my phone? and start it all over. after trying different roms i have more "roots" on my sdcard. so i want to erase sdcard, system, everything and start all over. how to do that??
i know i then wont have any rom.zip file on sdcard to install then, but seems like that can be done with sideloader in recovery right??
regards.
drumcodex said:
hi all
been searching and searching but doesnt find quite what i am want. so ill ask here.
how can i completely delete my phone? and start it all over. after trying different roms i have more "roots" on my sdcard. so i want to erase sdcard, system, everything and start all over. how to do that??
i know i then wont have any rom.zip file on sdcard to install then, but seems like that can be done with sideloader in recovery right??
regards.
Click to expand...
Click to collapse
dear,
i am using this method:
flash any rom, and make it root ZV9-ZVB-Universal-Root or towelroot
install freegee, grant root access, unlock bootloader, and install custom recovery
reboot into recovery by turning off, then vol up + power
in recovery, unmount everything, wipe data, system, and all cache, recovery will say there is no os to boot into (twrp has a full wipe option)
start adb sideload, connect usb, wait for drivers, and "adb sideload rom.zip" OR:
turn off, put in download mode: vol up and down, and THEN connect usb. wait for drivers, and use kdz updater in 3gqct - emergency for kdz files <1GB
drumcodex said:
how can i completely delete my phone? and start it all over. after trying different roms i have more "roots" on my sdcard. so i want to erase sdcard, system, everything and start all over. how to do that??
i know i then wont have any rom.zip file on sdcard to install then, but seems like that can be done with sideloader in recovery right??
Click to expand...
Click to collapse
One option would be to flash a KDZ -- that will get you to a complete fresh stock setup, and everything will be wiped from your phone. Of course, you need to root, unlock BL, and flash custom recovery before doing anything else...
Or, you can simply use your existing custom recovery to format the entire /data partition, as well as the /system. Specific options may differ between recovery versions, so I will just give you an example based on PhilZ Touch CWM that I am using. Normally, when you do "format /data", or wipe "clean to install a new ROM", it always preserves /data/media, which is your internal SD. To wipe it clean, you need to chose another option -- either "wipe user media" from the Wipe menu, or "format /data and /data/media" from Mounts and Storage menu. Other recoveries may have different options for doing this.
As for installing a ROM after wiping the internal SD, yes, you can use adb sideload from recovery.
I am having a problem it happened after I finally got to flash latest CosmicOS and set up a new password on my OP3. So, here’s what basically happened;
Once I got it up and running I noticed that home button and fingerprint sensor was completely disabled, then I tried to set up a new password (completely same password I used to decrypt my storage in TWRP 3.0.2-0) and fingerprint just in case but it didn’t react to me calibrating the fingerprint so I was like, ”alright, gladly I got a backup in TWRP”.
Once I rebooted to recovery it asked for a password as usually, once I typed that exact same password as before it just said wrong password, I tried it twice in case if I made a typo but still invalid password. And then I was panicing and pressed cancel and just rebooted back to OS.
I then removed all passwords there and booted back to recovery again, TWRP doesn’t ask for a password anymore but there’s a slider which says allow modifications or something similar and also there’s read only mode. When I slided the modification thing it just doesn’t show any of my files in sdcard folder when I go to ’Install’ tab but (0mb) instead. I even was able to browse and add files from my pc while phone was plugged in and in recovery mode, not anymore though.
Can anyone give me advice or help to get my oneplus 3 back in use? I have all the important files moved to my pc so I don’t mind losing files I have left in internal storage that much. Not if it’s necessary or easier workaround. thanks for reading this long-ass text :fingers-crossed:
EDIT: Issue SOLVED thanks to @AkR2014. I switched data partition from EXT4 to F2FS and then one more time back to EXT4 in TWRP's Wipe tab. (I was using latest blue_spark's TWRP-3.2.1-x version) and I was able to wipe data, system and both caches afterwards. After that I managed to flash new rom via USB-C to A with mounted USB flash drive on the other end and you know rest of the story. Do note that it WILL clear your internal storage so back up all the necessary files you need. And if you want to stay on F2FS data partition be sure to flash a ROM which supports it
EDIT2: There might be another way to mount your storage in TWRP but this is probably fail-proof method and worked for me
Oh and I couldn’t flash the Gapps in recovery after flashing the CosmicOs and nor I can’t now because of this haha. I can use my email though and send files through it from my another email if that helps
Vaahtopahvi said:
Oh and I couldn’t flash the Gapps in recovery after flashing the CosmicOs and nor I can’t now because of this haha. I can use my email though and send files through it from my another email if that helps
Click to expand...
Click to collapse
Try eng.stk's TWRP and clean flash ROM and Gapps.
tnsmani said:
Try eng.stk's TWRP and clean flash ROM and Gapps.
Click to expand...
Click to collapse
I couldnt find link for eng.stk TWRP, only people talking of it it. and what am I supposed to do with it once I get if you could explain? sorry for nooby questions
tnsmani said:
Try eng.stk's TWRP and clean flash ROM and Gapps.
Click to expand...
Click to collapse
Wait, I think I found it. But the question is can and do I need to update the latest eng.stk’s TWRP through fastboot? And if so, is there instructions topic somewhere?
So here's the latest update: I flashed twrp-3.1.1-2 via fastboot but once I go to recovery it still doesn't let me browse files in /sdcard and if I put new password in OS it doesn't match in TWRP. I have a OS where I can boot to but no Gapps installed.
People say formatting data in TWRP would work, I'm just scared if that doesn't work and won't let me boot to OS anymore (even though I have a TWRP back up which I made before wiping my OxygenOS system data and caches in my pc as well in my phone's storage atm) and I can't flash anything in recovery mode, is there anything I could do? I'm in desperate need of help right now.
In this CosmicOS i am using Android 8.1.0 and I'm afraid something isn't supporting it or so.
Vaahtopahvi said:
So here's the latest update: I flashed twrp-3.1.1-2 via fastboot but once I go to recovery it still doesn't let me browse files in /sdcard and if I put new password in OS it doesn't match in TWRP. I have a OS where I can boot to but no Gapps installed.
People say formatting data in TWRP would work, I'm just scared if that doesn't work and won't let me boot to OS anymore (even though I have a TWRP back up which I made before wiping my OxygenOS system data and caches in my pc as well in my phone's storage atm) and I can't flash anything in recovery mode, is there anything I could do? I'm in desperate need of help right now.
In this CosmicOS i am using Android 8.1.0 and I'm afraid something isn't supporting it or so.
Click to expand...
Click to collapse
As I said, flash eng.stk's TWRP. Simply flash the image to Recovery partition using the TWRP you already have. After that, wipe everything and clean flash the ROM. If anything goes wrong, you can use the Mega Unbrick guide method 2.
Here's the link to TWRP: https://forum.xda-developers.com/devdb/project/?id=15934#downloads
tnsmani said:
As I said, flash eng.stk's TWRP. Simply flash the image to Recovery partition using the TWRP you already have. After that, wipe everything and clean flash the ROM. If anything goes wrong, you can use the Mega Unbrick guide method 2.
Here's the link to TWRP: https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Click to expand...
Click to collapse
Thanks for the reply and link. I understood most of the parts except flashing the image to Recovery partition. Am I supposed to find the eng.stk’s TWRP from my Install tab in my current TWRP? Because it doesn’t show any files there. Also do I download the latest 3.2.1-x TWRP from the link you provided?
Vaahtopahvi said:
Thanks for the reply and link. I understood most of the parts except flashing the image to Recovery partition. Am I supposed to find the eng.stk’s TWRP from my Install tab in my current TWRP? Because it doesn’t show any files there. Also do I download the latest 3.2.1-x TWRP from the link you provided?
Click to expand...
Click to collapse
You will find TWRP 3.2.1-x v8.61 in the link I provided. Download that to your phone and save it. Restart your phone in recovery mode and in the current TWRP that you have, click the 'Install' button. By default, you will be shown zip files,if any. TWRP comes as an img file. So click the 'show img files' button at bottom right in TWRP and navigate to where you saved it and select it. Slide the bottom bar to install, you will be asked where to install it to. Select 'Recovery' and again slide the bar. It will be installed. To confirm, restart in recovery mode and check the version number of TWRP.
eng.stk's TWRP is compatible with OOS and custom ROMS. The offficial one doesn't work with some custom ROMs.
tnsmani said:
You will find TWRP 3.2.1-x v8.61 in the link I provided. Download that to your phone and save it. Restart your phone in recovery mode and in the current TWRP that you have, click the 'Install' button. By default, you will be shown zip files,if any. TWRP comes as an img file. So click the 'show img files' button at bottom right in TWRP and navigate to where you saved it and select it. Slide the bottom bar to install, you will be asked where to install it to. Select 'Recovery' and again slide the bar. It will be installed. To confirm, restart in recovery mode and check the version number of TWRP.
eng.stk's TWRP is compatible with OOS and custom ROMS. The offficial one doesn't work with some custom ROMs.
Click to expand...
Click to collapse
he is unable to mount storage via twrp , i have the sol but it will format your whole data / internal storage if your wiling to .
1 ) Go to twrp
2 ) wipe - > Advance wipe > change system file partation
3) if your on F2FS change to ext 4 or vice versa .
4 ) you will be able to mount sdcard
and dont flash this rom again , faceed same issue while flashing some oreo rom .
P.S : do it at your own risk .
AkR2014 said:
he is unable to mount storage via twrp , i have the sol but it will format your whole data / internal storage if your wiling to .
1 ) Go to twrp
2 ) wipe - > Advance wipe > change system file partation
3) if your on F2FS change to ext 4 or vice versa .
4 ) you will be able to mount sdcard
and dont flash this rom again , faceed same issue while flashing some oreo rom .
P.S : do it at your own risk .
Click to expand...
Click to collapse
Thanks man :highfive: I have really nothing to lose anyways so I gotta try that lol. How can I know whether I am on F2FS or EXT 4 though? And once it’s done can I access to my phone storage while it’s in recovery mode and just paste new rom to internal storage? Or do I need to push the rom via adb while in fastboot mode? Thinking to try out Paranoid rom which is based on Nougat, right?
tnsmani said:
You will find TWRP 3.2.1-x v8.61 in the link I provided. Download that to your phone and save it. Restart your phone in recovery mode and in the current TWRP that you have, click the 'Install' button. By default, you will be shown zip files,if any. TWRP comes as an img file. So click the 'show img files' button at bottom right in TWRP and navigate to where you saved it and select it. Slide the bottom bar to install, you will be asked where to install it to. Select 'Recovery' and again slide the bar. It will be installed. To confirm, restart in recovery mode and check the version number of TWRP.
eng.stk's TWRP is compatible with OOS and custom ROMS. The offficial one doesn't work with some custom ROMs.
Click to expand...
Click to collapse
Thanks for clarification tnsmani, appreciate the time you put into it. But as the person who replied to your text, I cannot mount the storage in TWRP which would prevent me of flashing pretty much anything on phone in TWRP.
Vaahtopahvi said:
Thanks man :highfive: I have really nothing to lose anyways so I gotta try that lol. How can I know whether I am on F2FS or EXT 4 though? And once it’s done can I access to my phone storage while it’s in recovery mode and just paste new rom to internal storage? Or do I need to push the rom via adb while in fastboot mode? Thinking to try out Paranoid rom which is based on Nougat, right?
Click to expand...
Click to collapse
yap you will be able to access your internal storage as well flash any thing you want from internal storage , no need to push via adb , use deskinfo app from playstore to check
the format of your data partition. yah try Omni 8.1.0 really awsome rom i am currently using. :laugh:
Vaahtopahvi said:
Thanks for clarification tnsmani, appreciate the time you put into it. But as the person who replied to your text, I cannot mount the storage in TWRP which would prevent me of flashing pretty much anything on phone in TWRP.
Click to expand...
Click to collapse
If you are able to boot into fastboot mode, you can install TWRP through ADB.
But you can not copy, paste in TWRP.
AkR2014 said:
yap you will be able to access your internal storage as well flash any thing you want from internal storage , no need to push via adb , use deskinfo app from playstore to check
the format of your data partition. yah try Omni 8.1.0 really awsome rom i am currently using. :laugh:
Click to expand...
Click to collapse
Great to hear that. Though I don’t have Gapps installed. Accidentally tried to flash the wrong one before the mounting problem occurred and now you know rest of the story :laugh:
I’ll try to find another way to check it though. Oh and as well as the ROM