Related
I have searched high and low for an answer on how to replace a scratched screen of the SGS2 by yourself and have finally found the answer.
This will definitely VOID YOUR WARRANTY so don't say you haven't been warned.
I suggest you only use this guide if you were desperate like me. My phone didn't come with an official warranty so I was as good as screwed if I wanted a new screen.
Step 1: Obtain the part
Just ebay for lcd screen and digitizer galaxy s2 (however u may wish to buy it with the faceplate see below note). You want both the super amoled plus screen and the digitizer together. You can get this for about 120-130 USD.
There are some vendors that sell just the 'lens' but you need a specialized machine to replace it and is simply not worth the trouble.
Note that if you go to an original Samsung service centre, when they order the part, it comes together with the face plate and is therefore a breeze to install. This part is for sale on Ebay too. http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0. I would recommend you to buy this type instead of just the LCD and digitizer.
Follow this disassembly guide (not mine).
Now using a thin metal flat tool with a wide flat surface area, dig at the small gap from the top of the screen and pry the screen from the frontplate. It is held entirely by double-tape so don't worry about any screws, catches. Be careful of not damaging the bezel in the process.
Clean off the old black tape and double tape as best as u can, and be careful of the bottom buttons. The attachment shows how it looks like after cleaning it.
Reapply the double tape in strips and try to shape it to fit as much as you can. This is tiresome but necessary since the adhesive behind the lcd screen is very weak and you don't your screen falling out of you halfway.
Push it in and it should stick. That's it! Then reassemble.
Confirmed working!
thanks for the write up, do you have any more photos of your process?
OMG, it's like watching an autopsy.
Could a better resolution screen or even 3d screen be used/upgraded later on?
Nice to know for something happens, Hope not
Hope wont be necessary. How did you scratch the screen so hard that it had to be changed? I tought the Gorilla Glass is almost unscratchable.
Man,,u shud handle it a bit gently ,,,,i mean,i flinched every time u "threw" the phone on the table.
On second thought, I might as well buy that screen protector
Sent from my GT-I9100 using XDA Premium App
wow that is the definition of T H I N !!!!!
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
Thanks also full part with bezel here http://www.ebay.co.uk/itm/Samsung-G...062?pt=LH_DefaultDomain_3&hash=item3cb9ff0e4e
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
With Housing Bezel front cover ,Home Button, Flex Cable
http://www.ebay.co.uk/itm/LCD-Touch...669?pt=LH_DefaultDomain_3&hash=item3cb9ff0cc5
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
With Housing Bezel front cover ,Home Button, Flex Cable Without Samsung logo
White house soon on site
psp888 said:
thanks for the write up, do you have any more photos of your process?
Click to expand...
Click to collapse
Unfortunately not at this time. I will do it the next time around (which will be soon as there is a slight imperfection with my button sensitivity so I might be inclined to try it again) but trust me it's not a beautiful process. Needs lots of guts. Nothing technical about it. Shove the flat tool in the gap and keep on loosening the glue as much as u can then take it off.
podgo said:
Hope wont be necessary. How did you scratch the screen so hard that it had to be changed? I tought the Gorilla Glass is almost unscratchable.
Click to expand...
Click to collapse
It's more like cracked. I dropped it on some rocks from waist height and it cracked. It seems that gorilla glass is not shatter proof. There are also some scratches/mini cracks from where the rocks cut it.
Lesson learnt, get a screen protector that hopefully will reinforce it a bit more.
I wonder how these replacement parts compare to the quality of the original parts.
Is your new screen a Super AMOLED+ screen? all ebay listing just says LCD. Is it original Samsung part?
psp888 said:
Is your new screen a Super AMOLED+ screen? all ebay listing just says LCD. Is it original Samsung part?
Click to expand...
Click to collapse
There some listed as Super AMOLED+ screen just search on ebay or even drop the sellers a question about their iteams.
It is a Super Amoled + screen (don't see any difference in quality between the old and new one). Most sellers don't really know much of their products unfortunately but they do say it's original and I do believe mine is.
There's no Samsung print on the front plate but it does have a part number which corresponds closely to the original one. Everything else looks exactly the same, even the black sponge at the back and the microchips have Samsung wording on them.
BarryH_GEG said:
OMG, it's like watching an autopsy.
Click to expand...
Click to collapse
I have stomach to watch dead bodies, but not a GSII LOL
Dropped SGS2 from bikemount : broken screen.
OK,
I broke my screen this weekend. I was on a bike tour with the SGS2 mounted on the steering bar. For some unclear reason, the universal holder came off the bikemount at 25 kmh... Dropped on the paved road, and although still in the universal holder, which is made of soft rubber (which I would expect to break the fall), the screen of my beloved SGS2 was cracked !!! Apart from the cracked screen, everything else seems to work as before.
So, today I ordered a replacement set with bezel from aliexpress.com at 148USD.
When I get the part, I will try to post some pictures of the replacement process.
I had an HD2 before ... just sold it last Friday :-( ... I think over a period of 1,5 year, I dropped the HD2 about 6 times on hard surfaces ... also it fell off my bike once ... the HD2 never broke.
So, is it just bad luck this time, or is the built quality of the SGS2 just not as good as the HD2 ?
Regards,
DirkB
DirkB19 said:
OK,
I broke my screen this weekend. I was on a bike tour with the SGS2 mounted on the steering bar. For some unclear reason, the universal holder came off the bikemount at 25 kmh... Dropped on the paved road, and although still in the universal holder, which is made of soft rubber (which I would expect to break the fall), the screen of my beloved SGS2 was cracked !!! Apart from the cracked screen, everything else seems to work as before.
So, today I ordered a replacement set with bezel from aliexpress.com at 148USD.
When I get the part, I will try to post some pictures of the replacement process.
I had an HD2 before ... just sold it last Friday :-( ... I think over a period of 1,5 year, I dropped the HD2 about 6 times on hard surfaces ... also it fell off my bike once ... the HD2 never broke.
So, is it just bad luck this time, or is the built quality of the SGS2 just not as good as the HD2 ?
Regards,
DirkB
Click to expand...
Click to collapse
It is very easy to do. Just unclip each component and transplant it to the new case.
I have to do my friends one this weekend as he has dropped it and damaged the screen and the bezel .
I have managed to source the screen and the bezel for him all as one piece .
Now all the guides i have seen just rip the phone to pieces , surely if we have the right bits like i have bought this fix is very smple to do??
I am thinking it is just a case of undoing the 7 screws at the back of the phone , opening it up and then disconnect the screen cables from the mainboard . Does the whole front then come away??
If not i take it i have to undo the screws on the main board to release the screen? but this means the componets of the main board may come loose etc??
Has anyone that has done this got any info on just swapping the screen with the complete part? when i say complete part i mean the one that comes with the bezel and home button etc like this
http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0
Thanks in adance for any guidance
buxz777 said:
Has anyone that has done this got any info on just swapping the screen with the complete part? when i say complete part i mean the one that comes with the bezel and home button etc like this
http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0
Thanks in adance for any guidance
Click to expand...
Click to collapse
+1 for me.
I received my screen including bezel.
I've removed the main board just like the guy in the Youtube video.
But now I still have to transfer (from original front to my new front):
- the bottom PCB (where the microUSB sits)
- the camera
- the speaker
etc ...
I can not find a description/movie of how to do this ?
The bottom PCB for example has 2 screws, but after removing them the PCB itself looks like glued to the front assy'.
I prefer to see or get proper instructions before starting the rest of this adventure
...
PS : I got my part from aliexpress.com within 2 weeks (via airmail). It's with the Samsung logo on it and the package included all required tools (screwdrivers) to do the job. Would be nice to see some written instructions included as well.
Grtz,
DirkB
Since I got my new Note 2 LTE last week, I've got very thin scratches on my screen, which is only visible under direct sunlight - I ordered for a screen protector way before I ordered my phone but my phone came very early in the post. Since these scratches are peeing me off, is they any way I can get the glass replaced? One that's scratch free and genuine?
All help would be greatly appreciated!
PS - Is it possible these scratches occurred through the manufacturing process?
Thank you!
Regards,
Dave
The stylus could have done it?
Yeah, possibly! I mean the scratches are extremely thin. I knew I shouldn't have used that damn stylus 'till I got a screen protector! I think that particles that are able to scratch we're carried by the stylus and left a nasty scratch
After seeing the various scratch tests on youtube,with keys and knives and whatnot(with hardly any scratches),its hard to imagine that stylus couldve done that.
Sand,maybe.
Get it replaced for another reason, and buy a screen protector for that one?
Well, not sure. I think this Gorilla Glass we get on the Note 2 is bu**s***. I've got all these tiny scratches on my phone, after a week; my phone has always been on a table or in my pants pockets with nothing else in the same pocket, I don't get how the hell it got scratched, just noticed it today and was pissed at work lol.
http://www.youtube.com/watch?v=nFdJOBOI3lY
Watch this . Makes you feel pity for that phone.
fml. it didn't even look like it scratched it! wtf?
Dirt/sand will easily scratch your screen
A screen protecter costs like $1
Why would you not use one
Sent from my GT-N7105 using xda premium
I dont know what you guys are doing. I use my pen, I walk on the beach daily and have the phone in my pocket. I take it out on the production floor at work and dont have any scratchs on my display. Even after 9 months of doing the same with my Note1, I dont have any scratches.
If you're really paranoid, you could research the cost it would cost to get your screen replaced, say $100.
Sell it for $50 cheaper than RRP. Then buy a new one. Profit I guess.
Beamed from Jupiter on my Galaxy Note II
This should be what you're after.
http://item.mobileweb.ebay.co.uk/viewitem?itemId=320984730131
I don't think it's the stylus or your handling as I have been using my note 2 for a few weeks now without a screen protector and I didn't notice any scratches. I don't know the real cause for your scratches but i have to tell you that in the note 2 user guide, there is a statement saying to don't put any screen protector. But it's purely your choice if you want to use it.
Sent from the undoubtedly best phone on earth, the Samsung Note II
Not to use any screen protectors? Why?
Handwritten from my Note 2
Laynee1 said:
Not to use any screen protectors? Why?
Handwritten from my Note 2
Click to expand...
Click to collapse
Because there is NO need to use any. If sand or dust gonna scratch it then a tiny protector, however pricey it is, won't save it either.
And really, these scratches come as per our usage pattern. I never could able to scratch my Note 1, which I used for 9 months and my S2, which was used for 6+ months. And no, I don't use my device carefully.
But the service center, where I submitted the Note 2 last week, was able to scratch the screen. I told them I'd give them an award.
is the lens glass (outer glass) replacable on the note2 ??on the s3 its quite a hard job to do and i ruined mine while trying.
is it not a combined unit outer glass and touch screen?
magyosha said:
is the lens glass (outer glass) replacable on the note2 ??on the s3 its quite a hard job to do and i ruined mine while trying.
is it not a combined unit outer glass and touch screen?
Click to expand...
Click to collapse
Proof. No bugger reads threads anymore.
FloatingFatMan said:
Proof. No bugger reads threads anymore.
Click to expand...
Click to collapse
thanks for your reply..
i cannot see either in this thread or others a definitive statement if the screen is the same glued to the digitizer type that the s3 has.
i can see the a outer screen can be purchased .. yes .
i am interested if it is the same or not as the s3 as when i heated my s3 up to fix the outer screen on that it buggered it up. and would breath a slight sigh of relief if the note2 outer screen was easier to replace,
forgive my inability to find the part you say i should of read
magyosha said:
thanks for your reply..
i cannot see either in this thread or others a definitive statement if the screen is the same glued to the digitizer type that the s3 has.
i can see the a outer screen can be purchased .. yes .
i am interested if it is the same or not as the s3 as when i heated my s3 up to fix the outer screen on that it buggered it up. and would breath a slight sigh of relief if the note2 outer screen was easier to replace,
forgive my inability to find the part you say i should of read
Click to expand...
Click to collapse
as I've read and watched on youtube before, I understood that most of the latest LCD/AMOLED/etc (screen) and digitizer(touch panel) of mobile units are glued tightly if not "built" together, hence "further" reducing or providing slimmer waistline for the actual unit,. i believe it can be taken apart but will be a "very" difficult task to do without leaving a mark or worst damaging the LCD/AMOLED screen,. just sharing my thought based on what I've learned on youtube and reviews which mostly is about tearing down new mobile devices,.
gedster314 said:
I dont know what you guys are doing. I use my pen, I walk on the beach daily and have the phone in my pocket. I take it out on the production floor at work and dont have any scratchs on my display. Even after 9 months of doing the same with my Note1, I dont have any scratches.
Click to expand...
Click to collapse
I do the same but still has scratches on my 3 weeks old note II
Skickat från min GT-N7100 via Tapatalk 2
So, I shattered the glass on my Galaxy S3 today. It's pretty messed up (see the attached picture), but the touch works, even in the damaged areas. So it seems it's only the glass that needs to be replaced, with something like this:
http://www.ebay.co.uk/itm/Blue-Fron...K_Replacement_Parts_Tools&hash=item417515ee67
Correct?
Yep, goodluck. Replaced the same on my Galaxy Note 2. all good now.
Yeah.... if i were you and have the funds, I would replace the complete assembly ($100-$150 on ebay) and be happy.
I shattered the screen on mine and replaced the digitizer alone and now the screen has freezing/unresponsive issues. I should of known better and replaced the complete assembly, I got what i payed for, literally less than that actually. Now i have a semi-new gs3 collecting dust until i save up for a complete lcd.
1slow4G said:
Yeah.... if i were you and have the funds, I would replace the complete assembly ($100-$150 on ebay) and be happy.
I shattered the screen on mine and replaced the digitizer alone and now the screen has freezing/unresponsive issues. I should of known better and replaced the complete assembly, I got what i payed for, literally less than that actually. Now i have a semi-new gs3 collecting dust until i save up for a complete lcd.
Click to expand...
Click to collapse
The screen seems to work fine, touch/responsiveness is working fine in the areas. I have no intention of spending the £100-120 on a complete new screen (again...). I'd rather save that for a Nexus 5.
I'll post again when I receive the part and it's been replaced.
MadsBen said:
The screen seems to work fine, touch/responsiveness is working fine in the areas. I have no intention of spending the £100-120 on a complete new screen (again...). I'd rather save that for a Nexus 5.
I'll post again when I receive the part and it's been replaced.
Click to expand...
Click to collapse
Mine was working fine with cracked digitizer as well. The problems started with new digitizer. Seems that when typing hard enough the digitizer touches LCD and causes to freeze up. Anyways, Good luck.
Sent from my neXus⁴ using Tapatalk 2
Actually the glass on an s3 is just that, glass. The digitizer is fused together with the LCD. However glass is glued to the LCD which can make it very difficult to replace. If you've never taken on the repair of a screen before then I would say you'll be more likely to break the LCD than not in your replacement of the glass. But again it is possible if you are very slow and very careful. As someone else mentioned though it's much easier to replace the whole assembly.
It didn't went well. I wasn't too carefull. In the bottom, the glass was too shattered, so when I tried to lift it, a piece with glue got stock and lifted the digitizer. So now that don't work. I'm not gonna spend £100-120 on a new digitizer, I'm gonna settle for my good old Nokia 6300i (and Nexus 7...) and wait for the Nexus 5.
I would wait for the n5.. gs3 is a dying trend already.
Its hard like everyone said , if your really gunna do it watch videos online and be prepared. If you know anyone that has done it successfully ask for help or tips
ouch didnt see u tried it already
the same happened to me on my wife's white sgs3 trying to be the savior of the day turned out to be an expensive digitizer replacement of $200 instead of the $8 glass replacement. I rushed the glass removal and cracked the lcd screen. I could have ordered one on ebay for $100 but wife needs the phone the next day so i decided to get it repaired locally.
Just replace the glass. A lot of care for changing it, but it is not so hard to do. I did it 2 weeks ago, and all is all right.
My 2 cents
bidibull14 said:
Just replace the glass. A lot of care for changing it, but it is not so hard to do. I did it 2 weeks ago, and all is all right.
Click to expand...
Click to collapse
Wanted to warn that changing the glass is not for everyone. It takes patience and zen. If you rush it, you will likely break LCD and spend even more $$$ that you would have otherwise. Also following notes:
1. Watch at least a couple of youtube videos before starting.
2. Heavy duty heat blower works much better than a hair dryer. Of course, don't go crazy, as it's possible to melt the phone with it
3. S III has a wire at the bottom (the one which goes to the buttons). If you damage it, you will need to replace whole LCD, there is [almost] no chance you will be able to fix this wire. So, always start removing glass starting with the top of the phone
4. Heavily cracked glass is hard to remove, as it crumbles. To make it easier, a) put a scotch tape on top of glass, so that the small pieces stick to it, and b) use a lot of heat
5. Everybody advises to use plastic tools, personally I used swiss army knife with high level of success, and never had a problem scratching LCD. Your mileage may vary, but using metal blade certainly makes life much easier, especially in heavily cracked glass situation.
6. If you do use blade, it often is enough to get blade just a little bit under a glass, and then simply apply heat. Big chunks will unglue all by themselves.
7. Remember, that failure is always an option. Don't use it on the phone, if you know that you desperately need it working right this day, if you don't have a plan B.
1slow4G said:
Mine was working fine with cracked digitizer as well. The problems started with new digitizer. Seems that when typing hard enough the digitizer touches LCD and causes to freeze up. Anyways, Good luck.
Sent from my neXus⁴ using Tapatalk 2
Click to expand...
Click to collapse
same freezing issue on mine... apparently the hardness of Gorilla2 is much greater than the knockoff glass replacements. The replacement glass on ebay and kijiji may not be authentic and that is why it bends slightly when pressed harder (in fact mine cracked completely when I applied too much pressure)
i replaced my glass too (about month ago), and discovered that , the "freezing issue" come's when you press too hard.. that the glass touches lcd.
after quick google-ing , i've found that they suggest to apply uv glue (octa glue) , to fix that.
have somebody tried that ? is it worth that much effort to mess with liquid glue ?
hani93 said:
i replaced my glass too (about month ago), and discovered that , the "freezing issue" come's when you press too hard.. that the glass touches lcd.
after quick google-ing , i've found that they suggest to apply uv glue (octa glue) , to fix that.
have somebody tried that ? is it worth that much effort to mess with liquid glue ?
Click to expand...
Click to collapse
I've heard about that glue too. I'm considering switching mine, because when I repaired I reused the glue of the original glass, and know I had dust between the glass and the lcd -.-
My concern is about the uv light, don't know if we could put in the sun to substitute it.
I was researching how to replace the glass on an iPhone not too long ago and watched a video where the guy used the UV bonding agent. Long story short he said you can use sunlight to cure it but it takes substantially longer than using a UV lamp. I don't know exact time for sunlight but apparently it would work.
Also it appeared to be a long delicate process of removing the current glue from the digitizer and LCD without damaging it. But I'm sure anyone who has already replaced the glass knows how tedious the process is.
m1batt1 said:
I was researching how to replace the glass on an iPhone not too long ago and watched a video where the guy used the UV bonding agent. Long story short he said you can use sunlight to cure it but it takes substantially longer than using a UV lamp. I don't know exact time for sunlight but apparently it would work.
Also it appeared to be a long delicate process of removing the current glue from the digitizer and LCD without damaging it. But I'm sure anyone who has already replaced the glass knows how tedious the process is.
Click to expand...
Click to collapse
it's not that hard to remove factory gle there..
for example, i removed mine, by rolling the glue with fingers.
just make sure, that you don't apply too much pressure to lcd.
and after that, clean up lcd form dust/fingerprints, and you are good to go.
and for removing glass, i used usual/ stronger kitchen knife (attached picture).
i replaced my glass 3 months ago.
i use normal hair dryer to remove glass and glass comes out almost as whole except for small broken pieces.
i think my scratch guard help in that.
i didnt use any additional glue or uv light.
nonresponsive screen is issue but only when you press too hard and press of power button resolve this issue.
but whole process of replacing galss took 2hrs
Hey All.
Been using nexus 7 2013 since last 2 years. My nephew dropped it and the screen cracked from the side. The device is working fine. The touch doesn't work at the the area of the cracks on the top right, and a few other places. But works everywhere else on the screen. My question is what has to be replaced, the digitizer or the entire LCD. My personal diagnoses is only the upper glass needs to be replaced. Please advice further!
Digitizer is for $15 and the whole thing is for $50. What has to be replaced and how to find out?
Please see the pictures and help me please
Get the whole thing. Replacing only digitazer is very difficult and compromises the tablet's construction.
no_cannabis said:
Get the whole thing. Replacing only digitazer is very difficult and compromises the tablet's construction.
Click to expand...
Click to collapse
agree with you
barriecary said:
agree with you
Click to expand...
Click to collapse
how much cost to replace?
I did it, two times, buy the glass+lcd+digitizer combo, you can find it at ~ $40
It takes 10 minutes to disassemble the tablet and 1h+ to separate the glass from the frame, the glue is very strong and the melting point is so high that you can melt the frame when trying to separate. Even doing this you will have to scrap the glue and zillions of microscopic bit of glass embeded in the glue. It's doable of course, but be patient!
I bought the screen + digitizer from Aliexpress about $20 last month
This was the guide I followed: https://www.youtube.com/watch?v=hAlNuGrGDuU
I didn't have heat gun or other thing, I just scratched the whole screen away from frame, took me couple of hours to completely replace the screen, but works nicely. This was the first time ever I've replaced a screen.
Just make sure you have double sided adhesive tape before you start, about ~3mm or so. My replacement screen didn't include that adhesive so I had to buy it separately.
well done..patience is the key, so id be not very good at it..haha..touch wood ive never dropped any of my tablets/mobiles, hopefully the cases i always put on would cushion any blows, i bought a used nexus 7 2013 and although cosmetically its in great shape, the lcd is showing blue blobs, like ink leakage..stuck pixels maybe, but i dont think you can just do the lcd change, the whole front would need buying which is pointless as i only paid £45 in the first place.. but im so impressed with it performance wise, i got a samsung t280 in the latest sale, returned it after 3 days, the chip inside was shockingly rubbish..
Hi, guys I have a question about the galaxy note 5 N920A. Is the display or should I say the digitizer screen is a two separate part?
My galaxy note 5 has a crack above and on top of the home button. the display and touch LCD works just fine without any kind of problems whatsoever. the only problem is that the crack seems to be spreading just like a crack windshield, which would soon look like a spider web. I would like to replace the crack plastic without changing the whole display screen:fingers-crossed:
I have check online for the display and to my dismayed the price is something I would like to ventured into. I also did further research and found quite a few which is describe as a panel screen for the display for only $10. So I am kind of confuse could this be also consider to be a tamper glass protector? Need advice please before I buy something that I might regret later on, since I am no novice with phone parts.
Thank you.
bnrrcast said:
Need advice please before I buy something that I might regret later on, since I am no novice with phone parts.
Thank you.
Click to expand...
Click to collapse
Hopefully you got your answer as its been a couple years since you asked, in case you didn't or anyone else thats curious about this, I recently replaced the screen on a Note 5, so have a bit of experience with it.
First to answer your question, a LCD screen and a tempered glass screen protector are 2 very different things. An screen is standard on every phone and is generally what you'd replace when your screen is cracked. On the other hand, a tempered glass screen protector is something you'd get and apply onto your phone's screen to protect it from hard drops onto the cement. They're quite effective depending on various factors but I definitely recommend them, if your screen is flat like the Note 5. Rounded edges screens like the S6 Edge thru S9, though tempered glass are available, reviews show they aren't nearly as effective, due to the "curved" wrap around edges, unfortunately.. Tempered glass screens have saved me a few times, after dropping my device, only the glass screen protector cracked, the phones LCD screen was undamaged. Tore off the cracked glass, $15 later, had a new on there. Small investment for the protection it gives, doubt a screen replacement will ever be around $15-20..
BTW, the Note 5s LCD screen is glass (Gorilla Glass 3, I think?) not plastic, as you mentioned..
Onto the bigger question, if you Google search "Note 5 teardown" you'll find quite a few tutorials w/ pics that breakdown the process, towards the end of them, after they've separated the LCD, you'll notice on back of it, there's a few small components, still attached. All of the teardowns, only mention the remaining removal difficulty is 5/5, the adhesive holding the screen much stronger than the LCD glass itself, though none have attempted the work..
Searching for LCD's on eBay, there's many listings of only the clear LCD glass, nothing else on back of it, which leads me to believe it is possible to do, but whoever attempts this may be the first and only one to have documented it.
If the pro's are semi-sketched from trying it, then, I'll trust their opinion, when replacing a friends Note 5 screen, we found a parts only device and did the swap, complete with all the little components on back.
I still have the rest of the parts, but it had water damage, so logic board is fried.
If anyone needs any other parts, PM me.