Develop Bugs

Space Key not appear in Full Qwerty Keyboard

Hi all.
Suddenly, the "Space Key" does not appear in Full Qwerty Keyboard.
Now ".com" & "/" appear instead of "Space Key".
(plz see the attached file)
I want to change from ".com" & "/" to "Space Key",, how ever i don't know the way.
Could u give the solution?

i had exact same problem. apparently you have to do a registry change to fix it. HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
Your variable might not be 1 but when my screen was as yours it was a 2. Laater it switched on its own to a 9 so dont lose this registry change because your probably going to have to do it again. I noticed when i added new contact or something to that effect it changed the variable

Thank you very much for your solution!
My "CurrentET9Style" is 6.
After revise from 6 to 0, Back to normal keyboard.
Thank you !!!
mjcole2003 said:
i had exact same problem. apparently you have to do a registry change to fix it. HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
Your variable might not be 1 but when my screen was as yours it was a 2. Laater it switched on its own to a 9 so dont lose this registry change because your probably going to have to do it again. I noticed when i added new contact or something to that effect it changed the variable
Click to expand...
Click to collapse

Did you install the tweak cab from ppgeeks? if so, that is your issue. It was in the 1st post

thanks ,i think i get it.

supdawg said:
Did you install the tweak cab from ppgeeks? if so, that is your issue. It was in the 1st post
Click to expand...
Click to collapse
who's first post? I did install the tweak cab from ppcgeeks and would like to read that 1st post. If i uninstall the tweak will it fix the reacurring problem or do i have to hard reset? Thanks

when i changed to "autocomplete" I had the same problem with the space key being gone until i put the registry back the way it was...Tj

Keep CurrentET9Style = 0 ??
Changed HKLM\Software\Tegic\eT9\Ime.change CurrentET9Style from 1 back to 0
This works temporarily, but when I click on the time in a calendar entry, it switches to numbers, and does not switch back unless I re-edit the registry. Is there any way to keep the setting from changing at all? I want it to stay at CurrentET9Style = 0.
Anybody?

Hi everyone. Okay, first let me just say that the "FixStuckTP2Keyboard.cab" is fine and it does work. But it reverts your keyboard back to the "eT9" and you probably did a registry hack to change it from that in the first place (changed it to "COMP") am I right? Not to knock that cab, like I said it works just fine but I did NOT want to "install" a cab file everytime this happened (after it would change it back to "eT9" I would have to go back into the registry and change it to "COMP" again.)
Let me tell you HOW this is happening in the first place, it has something to do with Opera. You can test this very easily. First get your keyboard working properly, then open Opera. Type something in the address bar or just tap the address bar and BAM! Your keyboard is stuck in that mode. Now I don't know why this happens, that mode is getting stuck in memory for some strange reason and it will NOT let go.
I'm assuming this is ONLY happening to those of us who have used the registry (or a program or cab) to change the keyboard to "COMP" instead of "eT9" since changing it back to "eT9" solves the problem.
There are three solutions:
1.) ONLY use the slide-out keyboard when using Opera.
2.) Use the FixStuckTP2Keyboard.cab
3.) Use the MortScripts I created.
Use "KB-OFF (eT9).mscr" to force the "eT9" info into the registry. Then use "KB-ON (COMP).mscr" to enter the "COMP" info back into the registry, then do a soft reset.
You can rename these files if you like.
Yeah I know it sucks to have to do a reset just to get the use of your spacebar back just because you used the virtual keyboard when using Opera but hey, what are you gonna do?
UPDATE: Just noticed that "sometimes" my scripts don't work if you click on them one after another (again for some strange reason). If this happens to you just click on "KB-OFF" soft reboot then click on KB-ON" & reboot. Weird I know.

xperia arc ics ring delay

Hello guys. Since I am on ics(even before the root and unlocking the bootloader) I am experiencing ring delays. I've reinstalled the .587 several times and the problem still exist. When someone phone me, the phone starts to vibrate and after 1-2 seconds starts to ring. Sometimes when someone phone me short I am unable to feel or hear the phone. It is interesting though that I have and xperia active(stock, non-rooted) which do not experience this problem.
I am running arcknight v4 kernel, 460-1612mhz, services.jar from supercharger v8, disabled cpu rendering + adreno JB drivers.
How can I solve this ring delay? Thanks in advance.

Could be a couple of things. Simplest first, if you've re-flashed the rom then re-pick your ringtone. If that doesn't work then recovery, backup, wipe data, advanced restore restore data, reboot(consecutively i.e. no boot between actions).

1. Be root
2. Download any file explorer (I recommend es file explorer, which is free)
3. Go to system and open build.prop
U will see a lot of lines, go to the end and add:
Code:
ro.telephony.call_ring_delay=0
to disable blackscreen after calls add
Code:
ro.lge.proximity.delay=25
mot.proximity.delay=25

Thanks a lot, it worked, but as i see it is a dialer problem. When the phone instantly start to ring, the name and the picture of the contact do not load. But when the name and the picture of the contact manage to be loaded and displayed when ringing, the ringtone delay is even bigger. I found here at XDA an archive with port of the dialer, contacts and etc from Xperia S(i'll flash it via CWM). I hope that will be better than the current. Thanks a lot again!

Help Home Button not working

anyone please help i cannot use my home button but the back button is working

help me please

What have you done to the phone, like root and so on? Also what G3 model?
Have you tried a reboot or reset?

GTCC said:
What have you done to the phone, like root and so on? Also what G3 model?
Have you tried a reboot or reset?
Click to expand...
Click to collapse
Check the file LGKeyguard.apk on your /system/priv-app folder.
You can try this, click on it and try running it, you should see a Note appearing with Cancel / Settings options, if not, that is your issue.
Check the file properties and make sure are -rw-r-r- then try running it again, if it works then reboot your phone.

home button doesn't work
SpeKtroNet said:
Check the file LGKeyguard.apk on your /system/priv-app folder.
You can try this, click on it and try running it, you should see a Note appearing with Cancel / Settings options, if not, that is your issue.
Check the file properties and make sure are -rw-r-r- then try running it again, if it works then reboot your phone.
Click to expand...
Click to collapse
Hi, I have the same problem with a LG G3 LS990: The home button doesn't work but the back button is working.
It still does make the click sound and icon highlights, but after that, nothing happens. And the long press does nothing on both.
I checked the file LGKeyguard.apk and the properties were -rw-r-r-
When I run it, it doesn't appear a note with Cancel / Settings, just the next:
s30.postimg .org/5iwyvki0h/Screenshot_2015_08_03_12_38_16 .png
s7.postimg .org/hwhsu00vf/Screenshot_2015_08_03_12_38_09 .png
(please remove the space before the dots)
I do installed in both modes but nothing happens. I rebooted, and the button still doing nothing.
Before that, I did a hard reset trying to solve it, but nothing.
What should I do?
Thanks in advance
(Android 4.4.2)

Button haptic feedback and q-button stopped working

Hello, this is my first time posting here. I was having some trouble with the touch screen not being responsive enough, sometimes missing my taps. So I installed this mod: http://forum.xda-developers.com/showthread.php?t=2347009&page=3
Not only did it not appear to change anything, after rebooting I found that my menu and back button no longer vibrate like they should (yes vibration is on in settings) and my q-button no longer does anything. And my home key does not turn the screen on now either. This has to be a simple key configuration change but someone please help me fix this issue Oh also I have the at&t version of the phone if that makes a difference.
Edit: I have found more information about this problem. One being that the mod I spoke of only changes the usr folder of the system folder which contains the key mappings gk-keypad-8064.kl file. I tested and trying to change the QuickButton command in the settings no longer affects this key mappings file as I believe it should. So somehow it either can't find the file (even though it's there) or thinks that the file is corrupt. So is there anyone who has the stock gk-keypad-8064.kl file I can use? Or maybe there should be different permission settings other that rw r r? Please let me know as I think this is the main problem here.

xlJohnnyIcelx said:
Hello, this is my first time posting here. I was having some trouble with the touch screen not being responsive enough, sometimes missing my taps. So I installed this mod: http://forum.xda-developers.com/showthread.php?t=2347009&page=3
Not only did it not appear to change anything, after rebooting I found that my menu and back button no longer vibrate like they should (yes vibration is on in settings) and my q-button no longer does anything. And my home key does not turn the screen on now either. This has to be a simple key configuration change but someone please help me fix this issue Oh also I have the at&t version of the phone if that makes a difference.
Edit: I have found more information about this problem. One being that the mod I spoke of only changes the usr folder of the system folder which contains the key mappings gk-keypad-8064.kl file. I tested and trying to change the QuickButton command in the settings no longer affects this key mappings file as I believe it should. So somehow it either can't find the file (even though it's there) or thinks that the file is corrupt. So is there anyone who has the stock gk-keypad-8064.kl file I can use? Or maybe there should be different permission settings other that rw r r? Please let me know as I think this is the main problem here.
Click to expand...
Click to collapse
How about you try to flash back to the stock rom using the lg flash tool?

I fixed it with a work around. I used exposed additions to force haptic feedback and also to map the q button key. Hopefully if anyone else has this problem it will help them.

LG G4 H815 - Optimizing Apps & Reboot after build.prop edit. Bootloop?

Hey,
I have a LG G4 H815, rooted, bootloader unlocked everytime I boot my phone it optimize apps, reboot, optimize apps, reboot, optimize apps reboot... Before this happend I edited the following line in **build.prop**:
persist.splitwindow.support_all=false to
persist.splitwindow.support_all=true
Okay, I did a hardware reset by pressing volume down and power button, but nothing happens. Unfortunately it don't even shows TWRP. It still says optimizing app 1 from 100. Is there a way to delete all apps and do a full hard reset? Will LG repair my phone? My PC don't recognize my phone. I am not able to answer on this topic until 27.02, because I am not home. I hope somebody got an idea. Thanks.