Related
Guys.
Here is the lewa os for the Q1010i . Ported from the Jiyau G2F. (yay for original port again)::victory:
Download from below:
https://drive.google.com/folderview?id=0BwkQgsLo9fXHQUFqZi1EM3lCcEk&usp=sharing
1) flash the Latest test Q1010i_LewaOS_24-07-2014.zip
2) flash lewaaudiopatch.zip (ONLY IF YOU HAVE AUDIO ISSUES)
3) thank XDA and everyone who helped you.
3.5) Feedback is welcomed and expected.
Enjoy
maxritz said:
Guys.
Here is the lewa os for the Q1010i . Ported from the Jiyau G2F. (yay for original port again)::victory:
Download from below:
https://drive.google.com/folderview?id=0BwkQgsLo9fXHeGczZFpUSXpvN3c&usp=sharing
1) flash the Latest test Q1010i_LewaOS_24-07-2014.zip
2) flash lewaaudiopatch.zip (ONLY IF YOU HAVE AUDIO ISSUES)
3) thank XDA and everyone who helped you.
3.5) Feedback is welcomed and expected.
Enjoy
Click to expand...
Click to collapse
I know it is based on kitkat but you should mention it and try to provide screenshots and features of the rom to get more attention.
I am currently on your lenovo rom and i am getting battery backup of more than 2 days as like stock but unable to find the option of battery usage in lenovo rom.
rishusngh said:
I know it is based on kitkat but you should mention it and try to provide screenshots and features of the rom to get more attention.
I am currently on your lenovo rom and i am getting battery backup of more than 2 days as like stock but unable to find the option of battery usage in lenovo rom.
Click to expand...
Click to collapse
Hi,
This Lewa OS is 4.2.2 not KitKat
You can view Battery usage in Lenovo Power app, but after installing Xposed Framework and BatteryStat for Kitkat module. My problem with Lenovo ROM is I am getting Battery life of 12 Hrs. I m on 3G/Wifi full day and Battery Stats shows Radio (Network) using 40-45% of Battery. I was Stock Rom as same but still i had 40% battery remaining at night. I m stock battery use was very good. Hopes for solution in next update.
Hi,
I have uploaded a new VIBEUI2 rom for the q1010i.
It should be better I think for battery life.
If you have issues on the older one. can you try deleting 2 files. Libaal and libaal_custom.so and test. Thanks
maxritz said:
Guys.
Here is the lewa os for the Q1010i . Ported from the Jiyau G2F. (yay for original port again)::victory:
Download from below:
https://drive.google.com/folderview?id=0BwkQgsLo9fXHeGczZFpUSXpvN3c&usp=sharing
1) flash the Latest test Q1010i_LewaOS_24-07-2014.zip
2) flash lewaaudiopatch.zip (ONLY IF YOU HAVE AUDIO ISSUES)
3) thank XDA and everyone who helped you.
3.5) Feedback is welcomed and expected.
Enjoy
Click to expand...
Click to collapse
Sim card not detecting any fix yet?
No such issue noticed in testing... I suggest to do a complete Factory reset, Cache, Dalvik wipe and format Data,Cache,System. Then install afresh.
Best of Luck.
andro2master said:
No such issue noticed in testing... I suggest to do a complete Factory reset, Cache, Dalvik wipe and format Data,Cache,System. Then install afresh.
Best of Luck.
Click to expand...
Click to collapse
done everything u said but still no sim card is detecting:crying: help
Using this ROM for a couple of days now. It has a few bugs
Initially had issues detecting the SIM cards. Got fixed later, after a few reboots, swapping sims etc - dont ask me how, dont know. I cut the SIMs by hand, and they are slightly smaller than ideal.
Messaging App says "Unfortunately contacts has stopped" and force closes. Happens quite frequently opening new messages from notification
Touch seems to be slightly off the UI elements- especially notification area and check boxes in general. I broke and replaced my LCD recently, not sure if this is because of that.
Unable to get gravity box working, GB framework crashes on opening. Some Xposed modules do work, XuiMod and other theming mods are not working.
Phone freezes occasionally and I faced one random reboot.
General RAM usage is high - only around 300mb available after clearing. But this is expected as it is JB and not KK
I downloaded the OTA update for this ROM, but was unable to flash the same. I think it is identifying that the phone is not the proper model to receive this update. Didnt capture the exact error
Battery backup and look and feel, transition effects and operational ease is pretty good(if you dont deal with SMS much).
maxritz said:
Guys.
Here is the lewa os for the Q1010i . Ported from the Jiyau G2F. (yay for original port again)::victory:
Download from below:
https://drive.google.com/folderview?id=0BwkQgsLo9fXHQUFqZi1EM3lCcEk&usp=sharing
1) flash the Latest test Q1010i_LewaOS_24-07-2014.zip
2) flash lewaaudiopatch.zip (ONLY IF YOU HAVE AUDIO ISSUES)
3) thank XDA and everyone who helped you.
3.5) Feedback is welcomed and expected.
Enjoy
Click to expand...
Click to collapse
Storage Issues..??
Hello!
I decided to finish CM10 and CM10.1 ROMs for Wildfire S. This thread is about CM10. Here's the ROM.
What's working:
- GSM
- Data (2G/3G)
- SMS / MMS
- FM Radio (use spirit FM)
- GPS
- USB
- Bluetooth
- WI-FI
- LED
- Camera
- Camcorder.
- Panorama mode (Laggy, but works.)
- Video playback [fully]
- VPN
- USB Tethering
- Wifi tethering
- Bluetooth tethering
- etc
What's not working:
- All ARMv7 features (Google Now, offline voice search and etc)
- You tell me
XDA:DevDB Information
CyanogenMod 10, ROM for the HTC Wildfire S
Contributors
niks255, PecanCM, modpunk, armv6team, JDevs, everyone else I forgot to mention
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 2.6.x
Version Information
Status: Stable
Stable Release Date: 2014-11-08
Created 2014-10-17
Last Updated 2014-11-08
Deodex version will be ?
ihor2284 said:
Deodex version will be ?
Click to expand...
Click to collapse
Maybe, but not from me.
New version is here!
Changelog:
Backported Superuser from CyanogenMod 10.1.
"Turn off" button in torch notification.
"Hide apps" option in trebuchet.
2G/3G switching in profiles.
Ringtone mode switching in profiles.
App type filter in app drawer (system/downloaded).
Removed not working features
Improved scrolling speed.
Fixed LiveWallpaper picker.
Added Simple2Ext.
Added call blacklist.
Small fixes and improvements.
Awesome! Thank you I will install it as soon as possible, only one question - is it really fast and smooth?
KoFiler said:
Awesome! Thank you I will install it as soon as possible, only one question - is it really fast and smooth?
Click to expand...
Click to collapse
Yep, but don't install it yet - I forgot to do something. I'll update this post when I do.
Updated! Please have fun!
niks255 said:
Yep, but don't install it yet - I forgot to do something. I'll update this post when I do.
Click to expand...
Click to collapse
Ok, I want to install it right now, so thanks for warning.
Using Cm10.1 with data2sd
Hi Niks255,
Thanks for your work on wildfire s, I have been using your cm 10.1 on my wfs since its release with data2sd script.
Now, I really want to shift to your cm 10 for wfs as it is faster and smoother. Is there any way of doing this without loosing me apps as I have read on some threads that data2sd can mess with back-ups.
or it will be fine if I just make a back up and flash this cm 10 rom and restore back up ?
am sorry for the noob question, as you can see my name I am a really a noob in these stuff
thanks in advance
Aman_noob said:
Hi Niks255,
Thanks for your work on wildfire s, I have been using your cm 10.1 on my wfs since its release with data2sd script.
Now, I really want to shift to your cm 10 for wfs as it is faster and smoother. Is there any way of doing this without loosing me apps as I have read on some threads that data2sd can mess with back-ups.
or it will be fine if I just make a back up and flash this cm 10 rom and restore back up ?
Click to expand...
Click to collapse
I recommend a clean installation. CM10.1 is a lot different than CM10.
You can backup your apps using Helium or TItanium Backup.
Aman_noob said:
am sorry for the noob question, as you can see my name I am a really a noob in these stuff
Click to expand...
Click to collapse
I've seen worse
Hi, can I have only three questions?
1. Which gapps are recommended?
2. Is here something like int2ext?
3. Is here any special tutorial about installation?
Thanks
KoFiler said:
Hi, can I have only three questions?
1. Which gapps are recommended?
2. Is here something like int2ext?
3. Is here any special tutorial about installation?
Thanks
Click to expand...
Click to collapse
1. yourzgapps
2. SImple2ext is in the rom, you can disable/remove it and install int2ext or something else
3. Just like any other ROM.
niks255 said:
1. yourzgapps
2. SImple2ext is in the rom, you can disable/remove it and install int2ext or something else
3. Just like any other ROM.
Click to expand...
Click to collapse
1. You mean KK gapps? Gapps-KK-4.4.0-Signed-UpdatedWithGtransport.zip?
2. Simple2ext is better than int2ext?
3. Ok
Thanks and sorry for "re-questions"
KoFiler said:
1. You mean KK gapps? Gapps-KK-4.4.0-Signed-UpdatedWithGtransport.zip?
2. Simple2ext is better than int2ext?
3. Ok
Thanks and sorry for "re-questions"
Click to expand...
Click to collapse
1. No. http://forum.xda-developers.com/showthread.php?t=2240652
2. Well, yes. You can choose what you wanna move to ext partition.
hi, how about battery life and deep sleep compared to 2.3.5 official? thanks for this great rom and debugging, you rock!
Hi, so I am running now your ROM for the third day and it is awesome! I see only some graphic bugs like when I tried to connetct to wifi, the form appear in status bar and one time i get lock screen somehow in status bar. Will it be solved? Otherwise its perfect ROM, I like it!
Well, im finally runnin this rom, int2extv2+ seems to be flawless than S2E (maybe i dont know how to setup, but int2extv2+ its a lot simplier than simple2ext, so its a bit taste of irony for me )
Things i like about this rom:
*Its smoothier and stable, at least more for every android4 roms that i have ever tried on the WFS
*It's like able to daily driver, cause of good RIL (atm dont find any RIL comedown)
*Android4! every WFS will need it for resurge like a phoenix from the ashes, its so cool, thanks for made it.
*Customizations!
Things i think probably work better on next builds
*Graphic glitches in the framework u.u
*Battery drain with screen on
*Touchscreen sensibility
ONE THING PLEASE, PLEASE HELP:
I can't overwrite gps.conf in this rom, im trying this patch [http://forum.xda-developers.com/showthread.php?t=1239713], tried flashable zip over recovery [aborted error:0], tried adb push [error: cant copy files files/dir] and i've tried root explorer and modify it manually, i can read it but i cant write it, i have tried changing permissions with ES Explorer and none of these things works u.u
Sorry my english, is anybody out there?
Hi, ive done some research about the touchscreen issue and i have found some interesting probes, lets see:
Its marked my finger direction and where it comes buggy, maybe in newer versions it works properly so a touchscreen fix maybe could be ported from cm10.2 or cm11, if not please tell me how can i can help u!
Thanks for this rom, battery life with screen off is SUPERB and its great! i'm fascinated with this rom!
Hope it will be helpfully
PLEASE ANYONE COULD TELL ME IF A RIL (RADIO INTERFACE LAYER) IS PRESENT AFTER A FEW ACTIVATIONS/DEACTIVATIONS OF IT OR 2G/3G SWITCH?
Please, im facing this problem and i don't know if my friend just bugged something or its a bug on al cm-branched roms, or if anyone faced this and get some feedback to fix it, please i love this rom but this bug make it unusable for my dear friend...
Love u xda, hope anyone read this and help meeeeeeeeeeeeeeeeeeee D:
no problems with RIL here, what problems exactly are you having
also good work nik
i had a problem with TTS too but its relatesd to the Gapps thats used, you have to use full gapps to get the best experience
from here is what i used , gapps-jb-20121011-signed.zip
http://wiki.cyanogenmod.org/w/Google_Apps
and do a full wipe in recovery
wipe factory reset / data
wipe system (advanced-Format system) (this helps on wildfire s for some reason)
- flash cm10 rom zip
- flash cronmod int2ext+
- flash gapps gapps-jb-20121011-signed.zip
if this improves things for anyone else, let us know
hope this helps
also ive been getting russian text here and there
i think the reason might be, errors in build.prop
you have duplicate entries you have EN and RU
also they are incorrect and should be like so
British english
ro.product.locale.language=en
ro,producl.locale.region=GB
American usa
ro.product.locale.language=en
ro,producl.locale.region=US
you have it incorrect
=ru, =ru
and
=en,=en
Hi! i am new to the forum and have a Letv Le 1 Pro US with stock malware Rom.
I want to change to CM12.1 ROM v3 by BetaHydri. But have a few questions. I am in doubt in rooting stock rom and clean the trojans and adware or changing to this custom Rom.
The rom in question is in this thread, but i can't ask there:
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
1-My question is if the GPS works fine? In stock Malware Rom is very fast. I see some custom roms with gps problem.
2-4G data works well on Sim2? and Hotspot?
3-Is any major bug on this v3 Custom Rom?
4-How many free Ram is available? without installing other apps besides the ones that are in the ROM.
Thank You, especially the user @BetaHydri
i need your help too sir
cm-12.1-20160713-Bet…weakV3.zip501.1 MB , so the system just 500 mb?
now im still using eui with malware , so i just follow the installation step?
Tested V3 installation sequence
I went to TWRP 3.0.2 for a factory reset wipe
Installed ROM "cm-12.1-20160713-BetaHydri-CollapseTweakV3.zip"
Installed OpenGApps arm64 5.1 Nano
Installed all three ZIPs from DolbyAtmos Fix
Wiped Caches via TWRP
Rebooted
I'm on the V4, and actually everything seems good! Just have to test some sensors (Gyroscope)
Presidente_84 said:
Hi! i am new to the forum and have a Letv Le 1 Pro US with stock malware Rom.
I want to change to CM12.1 ROM v3 by BetaHydri. But have a few questions. I am in doubt in rooting stock rom and clean the trojans and adware or changing to this custom Rom.
The rom in question is in this thread, but i can't ask there:
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
1-My question is if the GPS works fine? In stock Malware Rom is very fast. I see some custom roms with gps problem.
2-4G data works well on Sim2? and Hotspot?
3-Is any major bug on this v3 Custom Rom?
4-How many free Ram is available? without installing other apps besides the ones that are in the ROM.
Thank You, especially the user @BetaHydri
Click to expand...
Click to collapse
everyone works mate just go ahead and install v4 cm
I'm on V3 and all seems ok, what's the differences between V3 & V4?
martinbanshee said:
I'm on V3 and all seems ok, what's the differences between V3 & V4?
Click to expand...
Click to collapse
"Only some build.prop changes as some folks reported problems. [...]
one of the main changes was this:
ro.telephony.default_network=22,22 and ro.ril.hsxpa=1
it was before
ro.telephony.default_network=10,10 and ro.ril.hsxpa=2"
So LTE and UMTS changes basically
Thanks, I'll try V4 for a few days and see how it goes.
Sent from Tapatalk
thank you all guys.
Now i am with the stock original ROM EUI without malware, without any problem.
Can anyone post some pictures or screenshots from CM 12.1 ROM v4?
to see the appearance of the system
Stiffrigg said:
I'm on the V4, and actually everything seems good! Just have to test some sensors (Gyroscope)
Click to expand...
Click to collapse
How about MHL TV-OUT & IR blaster?
hello guys, sorry for bad english, i have problem on CM 12.1 V3, when some call me or message come my flash blinking. How to fix that?
dragangiga said:
hello guys, sorry for bad english, i have problem on CM 12.1 V3, when some call me or message come my flash blinking. How to fix that?
Click to expand...
Click to collapse
BetaHydri said:
Hi,
you don't need to uninstall FlashRing.
With the Flash RIng App you can configure which APP and when the Flash should be used for notification.
View attachment 3819790
View attachment 3819791
View attachment 3819792
View attachment 3819793
View attachment 3819794
Click to expand...
Click to collapse
Sent from my LeTv 1 Pro using Tapatalk
letv le 1 pro
willngg said:
Sent from my LeTv 1 Pro using Tapatalk
Click to expand...
Click to collapse
i fix it
thanks a lot
System freezes when data connection switches to Edge
Hi All,
Using this ROM from BetaHydri, overall it works really good, however I have a problem that is getting annoying: whenever the phone switches to Edge from LTE/HSPA, the system freezes. As this can happen even in a staircase in an office building or on a train ride on the countryside it is rather vexing.
I have deleted the caches, but the issue persists.
Has anyone encountered the same problem maybe? Any ideas how to solve this?
Evaluation and some solutions
After some evaluation I can say this rom is really good.
There were some issues however:
I had sensors malfunctioning (gyro inverted). There is some discussion on this subject in Betahydri's developer thread, but I cannot post there as I'm considered a newbie by xda
Somehow the sensor calibration file (/persist/sensors/sns.reg) can get messed up. The trick is to delete the file, and on the next boot the system should replace it with the defaults, which are in /system/etc/sensors/sensor_def_qcomdev.conf. But this is not (always?) happening on this CM rom. What I did to resolve was to delete /persist/sensors/sns.reg, make a full TWRP backup, factory wipe, flash cuoco's 11s rom, start it, confirm if the gyro is working again, then restore the TWRP backup. Maybe there's a simpler way, but this worked.
I had a non-working notification LED. Wiping data in TWRP solved this, but I just had to find out what it was It turns out wiping the data of Settings Storage (com.android.providers.settings) was enough to restore the notification LED. The culprit is that there is a value in the settings.db of this component, in the system table called notification_light_pulse which was set to 0 somehow. Setting it to 1 with SQLite Editor (speed software) also solved the problem. There are more interesting values in this table by the way.
IR is not working, this is a known issue and I have no solution.
Double tap to wake does not work, at first I thought this would be a showstopper for me, but then I found out that with the Gravity Screen app, I can wake and sleep by using proximity and G sensors, which more than satisfies my needs for easy wake up and sleep.
OTG is not working natively, this can be overcome by third party apps like USB OTG helper. Could have something to do with fuse kernel modules not being available.
Volume level of ringer/notification is not calibrated, first step is already very loud and it doesn't change much if set higher. Does somebody now a solution for this?
I have dual SIMs and I could not switch one SIM to anything else than GSM only. Trick is to disable the other SIM, then set the network mode you want, and then re-enable the other SIM. There can be only one SIM for data, but somehow it wouldn't switch if the other SIM (that currently has the data) is still active.
If I find more, I'll post here.
Getting pretty bad battery drain. I went from 100% to 60% in a few hours and I didn't even use the phone, it was just sitting on standby
chr0m said:
Getting pretty bad battery drain. I went from 100% to 60% in a few hours and I didn't even use the phone, it was just sitting on standby
Click to expand...
Click to collapse
You can try to see what is happening with OS Monitor (from play store) In settings, enable expert mode to see the native Linux processes, try to find the one that is eating the cpu. I had this once, it was some media indexer process that would not stop (can't remember the exact name).
xposed
Hi all,
Since i cannot post in ROM's thread, i will ask here for your help. I am having a hard time installing Xposed on BetaHydri-CollapseTweakV4.
I get an error while fashing Xposed Framework xposed-v86-sdk22-arm64:
<<Xposed version: 86
! Wrong platform: arm
! This file is for: arm64>>
So i successfully flashed the arm framework (for 32 bit), for afterwards to install XposedInstaller_3.0_alpha4. But now i am getting "Xposed Framework installed, but now active."
Any idea? Thanks.
Am I am on TRWP 3.0.2.0 by CUOCO92, coming from Le1PRO_US_X800-ROW-PB-v60-CUOCO92-5.5.014S.
Hi all
I've got the US version and I'm with 12.1 v4.
I got only edge on data sim (the other is one only for calls)
Any ideas as I can't select any options but GSM from the hidden menu in *#*#4636#*#*?
Is it OK if I flash 14s Cuoco now as I'm in 12.1?
---------- Post added at 02:42 PM ---------- Previous post was at 02:28 PM ----------
I just followed #slidetowipe and now I got LTE
T H A N K Y O U M A N ! ! !
It's interesting how the same phone works differently for different people... what I mean is that the GPS on my phone is very bad - it was bad from the very beginning with factory ROM, with MrRusch ROM, different versions, gps.conf tweaks, etc.... Now I am using an external bluetooth GPS receiver as the fix was painfully slow or non-existent. Some people report no such problems, how can that be, I wonder?
Now I use CM 12.1 V4 ROM from BetaHydri, But I found some bugs :
1. Error clock / alarm... If I choose setting or an alarm clock, appeared notification "unfortunately, clock has stopped"
2. IR isn't working
3. And I have a problem with the network 4G LTE, where the issue there is no on EUI ROM
Please help me to fix it.
To be honest I prefer premises EUI ROM if there is not malware and adware, Is there EUI ROM clean of Malware and adware?
If there are please help me to link from the ROM and the way instal rom, because I was new in using x800.
And I had experienced hard brick at instal couco92 14S.
Thanks
Once again, I am Here to present my new Port Rom --
**--+--EMUI 4.1--+--**
About Rom ("_")
Smooth
Fast
Stable
Beautiful :angel:
Now, Comes to Installation Process.
Same as other Roms, but tell i will tell you once again.
Installation:--
-Goto Twrp
- Wipe Cache, dalvik, System, Data
-Goto Install
-Select Emui 4.1 Rom zip
-Flash
-flash patch [for Camera]
INFO:
Only important GApps like Google App, Gmail and Chrome, as well as the Google core apps and services (which must be in ROM) installed. All the other GApps debloaded - everyone can use Playstore to install what is needed (Google Music, Drive, Maps ...)
Downloads :-
Rom -- https://drive.google.com/file/d/1x4IkhOm3Y7b77AQyTDUY4YAihg8FQthl/view?usp=drivesdk
Camera Patch -- https://drive.google.com/file/d/0B4VkGc5GGk30YUZja1hpMVc0UTQ/view?usp=drivesdk
Bugs:-
- Only Volte (hard to fix) :crying:
- you tell me
If you like my work - fell free to donate via Paytm - Akashdeep Shukla (8077007389) :fingers-crossed:
ROM :- EMUI 4.1
ANDROID :- MARSHMALLOW
KERNEL :- 3.18.19 [x32]
Credits:-
Me (For Porting)
4pda (for Rom)
And You guys for all your Support
Here the Screenshots
Is this ROM similar to MIUI? What are the advantages of this ROM over MIUI though?
DystopianDJ said:
Is this ROM similar to MIUI? What are the advantages of this ROM over MIUI though?
Click to expand...
Click to collapse
Hotspot working fine...
DystopianDJ said:
Is this ROM similar to MIUI? What are the advantages of this ROM over MIUI though?
Click to expand...
Click to collapse
Stable , smooth and its a stock rom of huawei
I faced a wierd problem after flashing the ROM,
I could not turn the WiFi on..
But then I SOLVED the issue by reflashing the ROM and then skipping all the initial step such as Google account login...
Then WiFi started working fine...later I logged in with no issues...:good:
Does this rom supports Magisk and Xposed for Magisk module? If someone tries then do let us know.
This ROM is epic. Thanks for this, just that the low DPI is a little to small for me though (yes I have tried using Easy DPI Changer). I guess I'll just increase the font size using the original DPI of this ROM. xD
The only problem I've experienced is the problem of camera not being able to focus properly. Please check if this a general problem as it was persistent in mine.
Thanks again!
DystopianDJ said:
This ROM is epic. Thanks for this, just that the low DPI is a little to small for me though (yes I have tried using Easy DPI Changer). I guess I'll just increase the font size using the original DPI of this ROM. xD
The only problem I've experienced is the problem of camera not being able to focus properly. Please check if this a general problem as it was persistent in mine.
Thanks again!
Click to expand...
Click to collapse
Flash the updated camera patch provided with MIUI 8 ROM...
You can also flash the same patch with stock ROM
manishah.1996 said:
Flash the updated camera patch provided with MIUI 8 ROM...
You can also flash the same patch with stock ROM
Click to expand...
Click to collapse
Okay thanks for this. I had flashed the second updated Camera Fix that was given in this thread and I had experienced the error.
But what do you mean by flashing it with Stock ROM? Stock ROM already has everything working properly though.
DystopianDJ said:
Okay thanks for this. I had flashed the second updated Camera Fix that was given in this thread and I had experienced the error.
But what do you mean by flashing it with Stock ROM? Stock ROM already has everything working properly though.
Click to expand...
Click to collapse
Not in this threads....In the MIUI thread..
And I've flashed the camera fix patch on both this and stock ROM because it gives the background some decent blur to make the pic look good..
manishah.1996 said:
Not in this threads....In the MIUI thread..
And I've flashed the camera fix patch on both this and stock ROM because it gives the background some decent blur to make the pic look good..
Click to expand...
Click to collapse
Wow thanks! I'll try patching the MIUI one on Stock ROM rn.
DystopianDJ said:
Wow thanks! I'll try patching the MIUI one on Stock ROM rn.
Click to expand...
Click to collapse
https://drive.google.com/open?id=0B59Ujza640rNN2RfUFczNl9YTTg
Has anyone tried Magisk Or Exposed with this Rom?? Please revert.
I installed the Rom and i must say it looks so good and works so smooth the icons and interface looks beautiful.. The only strange problem am facing is that am not able to connect to wifi as am not getting any mac address or the IP address in the advanced setting menu, so please help me to fix this as i dont wanna switch from this rom because of this problem.. i already installed the Rom from the scratch by also wiping the internal storage but still the same issue, any fix will be really appreciated..
solkarsalman said:
I installed the Rom and i must say it looks so good and works so smooth, battery backup is amazing also the icons and interface looks beautiful.. The only strange problem am facing is that am not able to connect to wifi as am not getting any mac address or the IP address in the advanced setting menu, so please help me to fix this as i dont wanna switch from this rom because of this problem.. i already installed the Rom from the scratch by also wiping the internal storage but still the same issue, any fix will be really appreciated..
Click to expand...
Click to collapse
Flash the ROM.....
Don't sign in to your Google account during the initial setup...skip everything...
Once the setup is complete... reboot...and sign in to WiFi....
DystopianDJ said:
This ROM is epic. Thanks for this, just that the low DPI is a little to small for me though (yes I have tried using Easy DPI Changer). I guess I'll just increase the font size using the original DPI of this ROM. xD
The only problem I've experienced is the problem of camera not being able to focus properly. Please check if this a general problem as it was persistent in mine.
Thanks again!
Click to expand...
Click to collapse
Pleasure brother:fingers-crossed:
manishah.1996 said:
Flash the ROM.....
Don't sign in to your Google account during the initial setup...skip everything...
Once the setup is complete... reboot...and sign in to WiFi....
Click to expand...
Click to collapse
And that fixed the issue.. Thank you so much for the help..
" Friends any updates about magisk with this rom?
The only bug I experienced was that after changing the DPI to 320, the UI literally broke. The notification bar had all the broken lines, the icons went haywire. Everything seemed like a chaos which ruined the experience for me though. I don't exactly think if a fix is possible since it might be the issue of porting for a device but regardless, it was important to mention.
solkarsalman said:
I installed the Rom and i must say it looks so good and works so smooth, battery backup is amazing also the icons and interface looks beautiful.. The only strange problem am facing is that am not able to connect to wifi as am not getting any mac address or the IP address in the advanced setting menu, so please help me to fix this as i dont wanna switch from this rom because of this problem.. i already installed the Rom from the scratch by also wiping the internal storage but still the same issue, any fix will be really appreciated..
Click to expand...
Click to collapse
STOCK ROM INSTALLATION WITH TWRP RECOVERY
Check this video
Without wiping your imei no flash stock rom
This method is find by me please share to others
:good:
---------- Post added at 06:07 PM ---------- Previous post was at 06:06 PM ----------
akash_eric said:
Once again, I am Here to present my new Port Rom --
**--+--EMUI 4.1--+--**
About Rom ("_")
Smooth
Fast
Stable
Beautiful :angel:
Now, Comes to Installation Process.
Same as other Roms, but tell i will tell you once again.
Installation:--
-Goto Twrp
- Wipe Cache, dalvik, System, Data
-Goto Install
-Select Emui 4.1 Rom zip
-Flash
-flash patch [for Camera]
INFO:
Only important GApps like Google App, Gmail and Chrome, as well as the Google core apps and services (which must be in ROM) installed. All the other GApps debloaded - everyone can use Playstore to install what is needed (Google Music, Drive, Maps ...)
Downloads :-
Rom -- https://drive.google.com/file/d/1x4IkhOm3Y7b77AQyTDUY4YAihg8FQthl/view?usp=drivesdk
Camera Patch -- https://drive.google.com/file/d/0B4VkGc5GGk30YUZja1hpMVc0UTQ/view?usp=drivesdk
Bugs:-
- Only Volte (hard to fix) :crying:
- you tell me
If you like my work - fell free to donate via Paytm - Akashdeep Shukla (8077007389) :fingers-crossed:
ROM :- EMUI 4.1
ANDROID :- MARSHMALLOW
KERNEL :- 3.18.19 [x32]
Credits:-
Me (For Porting)
4pda (for Rom)
And You guys for all your Support
Click to expand...
Click to collapse
STOCK ROM INSTALLATION WITH TWRP RECOVERY
Check this video
Without wiping your imei no flash stock rom
This method is find by me please share to others
:good:
[Mirror] - Download link: Maps_Rom_NX563J_MIUI10_8.12.6.zip
Source: https://bbs.nubia.cn/thread-1408995-1-1.html
Rom Info Translated
ROM Author: Maps233 (microblogging: Maps- cherish day time)
BUG submitted: HTTP: //weibo.com/maps233
Android Version: 8.1
ROM version: MIUI10 (8.12.6)
Updated: 2018-12-12
applicable models : Nubia Z17 (NX563J)
ROM size: 1.34GB
Click to expand...
Click to collapse
Attached below is the Google Installer that works for me
*Note* this is not my work I'm only mirroring it for people outside of China
Any informations about installation steps? It's multi language rom? This app, what's for?
surfer30 said:
Any informations about installation steps? It's multi language rom? This app, what's for?
Click to expand...
Click to collapse
The usual Wipe System, Data, and Dalvik/Art and Cache then flash and reboot.
I can't read some of the characters for the other languages but it has English and Chinese. And the attached apk is to install the Google services and Playstore.
Mobstergunz said:
*Note* this is not my work I'm only mirroring it for people outside of China
Click to expand...
Click to collapse
Is that a treble rom?
aljoscha81 said:
Is that a treble rom?
Click to expand...
Click to collapse
No it's a proper nx563j rom
I just flashed this room.
Steps:
1. Flash newest Nubia radio 5.52
2. Flash ROM.
My opinion
1. This isn't global rom, just China (few Chinese dialects and English)
2. I had problem with WiFi connection. Few times on a minutes lost.
3. Problem with magisk. I installed it but modulus was problem
Overall, very nice luncher, quick and light. But depends above points not for me.
surfer30 said:
I just flashed this room.
Steps:
1. Flash newest Nubia radio 5.52
2. Flash ROM.
My opinion
1. This isn't global rom, just China (few Chinese dialects and English)
2. I had problem with WiFi connection. Few times on a minutes lost.
3. Problem with magisk. I installed it but modulus was problem
Overall, very nice luncher, quick and light. But depends above points not for me.
Click to expand...
Click to collapse
For me the the only issues are the Wifi is toggled off after a reboot but I can turn it right back on. Magisk 18 works perfectly fine for me. I only used YouTube vanced and ablock tho. The Radio and all other necessary firmware is in the zip. And the Flashlight quick toggle doesn't work but using an app from the Playstore does work.
For me it's the most stable 8.0+ Rom that I like UI wise. The other Roms I tried keep crashing in the apps this one doesn't.
I use this rom about a week ago, and it's good, but I noticed some bugs:
- the battery is draining at night very fast (~20% in 8 hours), but I switch the network from 4G to 2G. MIUI
optimization is turned on in developer settings. I can't figured out what causes this.
UPDATE: Turning off and on the feature without restart fix this issue. I think the restart is turning off the optimization!
- VIBER calls are horrible, the sound is cracking and freezing
- the Magisk root is turned off daily, restart is fixed the problem (i use v18)
- I receive the fb messenger messages and e-mails ~10 minutes after sending, or when I open the app. (I tried to lock the apps to memory, but no success)
- Reading Mode isn't working
Can someone detected any of these?
Otherwise good work, thanks!
(sorry for my english)