Develop Bugs

[Q] CM7 nightly doubts.

Few n00b questions.
Firstly, how do i flash a nightly on my phone? lets say im running ofw 2.2 SEA edition? Do i follow the same procedure as if to flash RC1... do i also need to flash gapps similarly.
Secondly, are the links on quarxs' CM7 for defy thread up-to-date? or are there newer versions of gapps and nightlies floating around somewhere
Third, i have noticed that there is an issue with network and wi-fi when i flash cm7 RC1 over the nordic sbf. when i go back to official 2.2 SEA there is no hassle at all. Since i live in india i was wondering if that was the issue. I can easily take care of the network problem using "baseband switcher for defy" but it still doesnt help the wi-fi problem.
My question is.. will using the new BOOTSEA nightly solve this problem. I am assuming from the name is boot"SEA" im assuming its built southeastasia specific.
Fourth, ive used CM7 RC1 for a while and apart from the wifi issue i got problems with camera and video... it absolutely doesnt work, wether it be in potrait or landscape or whatever setting... the app just force closes. Any fixes for that.. ive got green lens.
please help!!! and i hope other similar questions can be added by members here so as to make this thread an FAQ for distressed users like me.
Thanks

deathw15h said:
Few n00b questions.
Firstly, how do i flash a nightly on my phone? lets say im running ofw 2.2 SEA edition? Do i follow the same procedure as if to flash RC1... do i also need to flash gapps similarly.
--> I'd say install RC1 and gapps first, then try a nightly by just wiping cache and Dalvik - no need to install gapps again since they're on your phone now. If you install a BOOT version and want to go back to an earlier CM7 nightly, then you might want to start from scratch, reflash froyo and install RC1 + gapps again.
Secondly, are the links on quarxs' CM7 for defy thread up-to-date? or are there newer versions of gapps and nightlies floating around somewhere
--> mostly up to date, but I don't worry about gapps too much as I believe that the Market gets updated automatically anyway (but I might be wrong about that). On the OP, the link to the gapps should show you up to date versions; but read the comments on there - very important.
Third, i have noticed that there is an issue with network and wi-fi when i flash cm7 RC1 over the nordic sbf. when i go back to official 2.2 SEA there is no hassle at all. Since i live in india i was wondering if that was the issue. I can easily take care of the network problem using "baseband switcher for defy" but it still doesnt help the wi-fi problem. My question is.. will using the new BOOTSEA nightly solve this problem. I am assuming from the name is boot"SEA" im assuming its built southeastasia specific.
---> same here my wifi DL speed was really bad for the last month or so on CM7; only after BOOT179-4 install, my wifi speed somewhat got back to normal.
Fourth, ive used CM7 RC1 for a while and apart from the wifi issue i got problems with camera and video... it absolutely doesnt work, wether it be in potrait or landscape or whatever setting... the app just force closes. Any fixes for that.. ive got green lens.
---> My camera and video worked on RC1 (and earlier) but video recording had some chopiness at times. Around July 11th nightly, Quarx released a camera fix (in that nightly) that solved the problem for me. But then days later, on newer nightly builds, I got the FC problem on video camera (same as you but red lens here). Then with BOOT179-4, camera was fine again and so the wifi speed; so all good for me.
--------> I really don't know what's going on with the video camera: many poeple have problems and many have it working on every nightly builds. It has been a problem from day one for Quarx on CM7-jordan... You have to try and see which build works for you I guess. And like you said, BOOT-SEA definitely looks like something you should try - many people liked it and many people say yesterday nightly is the best for them so far... so go on and have fun with testing
---> Before you do more testing though, you can always do a backup from the custom recovery so it will be easy for you to restore your current phone state -if nothing improves. I do this all the time: stock recovery factory reset, nordic flashing, RC1 install then restore my (BOOT179-4 now) backup.
Please help!!! and i hope other similar questions can be added by members here so as to make this thread an FAQ for distressed users like me.
---> I did try to help - I hope I did! If so, you can use that "Thanks" button - hehe!
---> Not sure that a thread entitled "nightly doubts" will become a very popular
FAQ thread though
Thanks
Click to expand...
Click to collapse
........................

[] AL [] said:
........................
Click to expand...
Click to collapse
thanks for all the help

There is a FAQ for flashing cm7 go and read it There is no need for threats like This
Send from my brain using Tapatalk

dumrul said:
There is a FAQ for flashing cm7 go and read it There is no need for threats like This
Send from my brain using Tapatalk
Click to expand...
Click to collapse
i went thru the whole FAQ but my doubts are regarding the nightlies which it doesnt address hence the thread.
thx for the concern though.

downloaded the BOOTSEA, but there is another file "cm7-110726-0018-BOOTSEA-Jordan.zip.md5sum" mentioned below it. ( there are similar md5sum files for all nightlies...) are they essential ? and how do i use them.
wanted to clarify before proceeding.

deathw15h said:
downloaded the BOOTSEA, but there is another file "cm7-110726-0018-BOOTSEA-Jordan.zip.md5sum" mentioned below it. ( there are similar md5sum files for all nightlies...) are they essential ? and how do i use them.
wanted to clarify before proceeding.
Click to expand...
Click to collapse
Md5 files are to verify your download is not corrupted one. Which you can compare the md5 after downloading the zip file and regenerating the md5 of downloaded file and check against the one in the server.
Sent from my MB525 using XDA App

deathw15h said:
thanks for all the help
Click to expand...
Click to collapse
No problem.
Go read here on the official CM7-jordan thread: http://forum.xda-developers.com/showthread.php?t=1033654&page=943
And from post 9429 particularily; pretty much goes in the same direction I was pointing at regarding the wifi and video camera...
How's the BOOTSEA doing for you?

The nightly ones is just the output that the ones who are working on the rom ups to us. Normally have all that part on topic that say "next version:..."
If you wanna try the nightly one, use as the *.zip that you download when got the "rc1 v2" for exemple. So wipe the phone, choose install from a zip of the sdcard and choose the *.zip, been it the rc1 or the nightly build.
The md5sum file is the one that contains the 5sum from the file. Its nornaly given when you have to download a big file and have fear to corrupt the file. If you use linux, go on terminal and type "5sum file" when file is the name of any file that you have. It will give you a big number. This is the 5sum. The *.md5sum have the 5sum of the respective *.zip nightly rom.
Sent from my MB525 using XDA App

how is the battery life with the nightly builds?

what android version is the 27/7 nightly build using? is it 2.3.5?

yup..its 2.3.5

[Q] Stable Android 4.0 ROM that can be used with Odin?

I'm looking for a stable Android 4.0 or above ROM which can be flashed using Odin. Any threads or links?

zacszy said:
I'm looking for a stable Android 4.0 or above ROM which can be flashed using Odin. Any threads or links?
Click to expand...
Click to collapse
Well I am not aware of any 4.0 or above ROMs that can be flashed via ODIN. I am sure if any developer wants, they may be able to do it but I really think that flashing via recovery is always a better choice compared to ODIN. I see no advantage for ODIN flash...
Do you mind telling me why do you need odin flash???

Well..
thearif said:
Well I am not aware of any 4.0 or above ROMs that can be flashed via ODIN. I am sure if any developer wants, they may be able to do it but I really think that flashing via recovery is always a better choice compared to ODIN. I see no advantage for ODIN flash...
Do you mind telling me why do you need odin flash???
Click to expand...
Click to collapse
Well, I'm more familiar with Odin flashing compared to recovery mode, and it's a whole lot easier compared to other flashing methods. I don't find that the recovery mode is easy to understand, so you mind to provide me the steps (better if they are easier to understand and follow) and also a link to a stable Android 4.0 Rom?

zacszy said:
Well, I'm more familiar with Odin flashing compared to recovery mode, and it's a whole lot easier compared to other flashing methods. I don't find that the recovery mode is easy to understand, so you mind to provide me the steps (better if they are easier to understand and follow) and also a link to a stable Android 4.0 Rom?
Click to expand...
Click to collapse
Do you have root access on your phone? Every step is actually quite easy to follow. There are really good guides on both general and development sections. But beforewe delve into howto's you should clarify what constitutes STABLE for you...
We have ICS (4.04) as well as JB ( 4.1.2 and 4.2.2) in the development section. All are pretty good but here and there they may have some bugs. Just go to their threads check them out. On the very first page of a ROM thread what works and what doesn't are listed. Decide whether you can live with one of them then we can talk about howto's.
I recommend CM9, CM10 and CM10.1 all from the developer arco68...
OHHH with a custom recovery, you don't even need a computer to flash a new ROM. That surely is a bonus...
Sent from my GT-I8150 using xda app-developers app

Okay..
thearif said:
Do you have root access on your phone? Every step is actually quite easy to follow. There are really good guides on both general and development sections. But beforewe delve into howto's you should clarify what constitutes STABLE for you...
We have ICS (4.04) as well as JB ( 4.1.2 and 4.2.2) in the development section. All are pretty good but here and there they may have some bugs. Just go to their threads check them out. On the very first page of a ROM thread what works and what doesn't are listed. Decide whether you can live with one of them then we can talk about howto's.
I recommend CM9, CM10 and CM10.1 all from the developer arco68...
OHHH with a custom recovery, you don't even need a computer to flash a new ROM. That surely is a bonus...
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
I have root access on my phone. Well, I don't see the ROM thread that you mentioned. Stable means that the ROM is not easy to crash or eats up my RAM even when I'm not using it, while common bugs are still acceptable if they can be fixed (I can't find threads from arco68, so I don't know what you mean by his CM9 and all those so...)
Hope you can enlighten me more about this recovery method and the difference between the CMs (if possible, also include any differences between ICS and JB b'coz I don't know which one to choose)

Recovery is super easy:
Download the zip and put it on your SD (internal or external, makes no difference)
Then turn of your phone
Press and hold Volume up + Power button + home button
Once the screen turns on, release the power button, but keep holding onto the other two
Then the recovery menu shows up
choose install zip from SD
select the zip and hit install
finished
Here are the links, with more detailed instruction on how to do it
CM10.1
http://forum.xda-developers.com/showthread.php?t=2214042
CM10
http://forum.xda-developers.com/showthread.php?t=1990795
CM9
http://forum.xda-developers.com/showthread.php?t=1576874

Ups and downs?
Are there any down sides regarding the CM9 mod? And can I change the shortcuts on the lockscreen if I install CM9?
And also, what is CWM actually? I don't understand from the FAQs in the forums or other sites, so can you tell me what CWM is (CWM5 or CWM6) and how to access or install that?
Sorry, I'm really considered a total newbie in this sort of stuff 8(>o<)8

zacszy said:
Are there any down sides regarding the CM9 mod? And can I change the shortcuts on the lockscreen if I install CM9?
And also, what is CWM actually? I don't understand from the FAQs in the forums or other sites, so can you tell me what CWM is (CWM5 or CWM6) and how to access or install that?
Sorry, I'm really considered a total newbie in this sort of stuff 8(>o<)8
Click to expand...
Click to collapse
Its a kind of recovery, called ClockworkMOD. Now its the 6.0.3.0 version if I'm not wrong...
Linky: here
Okay, the process of installation of a custom recovery is tedious. Link: here DO NOT USE THE FILES IN THIS PAGE. JUST THE INSTRUCTIONS.
Now, flash the ROM (any of the three is fine. I personally recommend CM9 or 10 cus its in its RC stages, which means Resource... something)
The instructions is on the ROM page itself. And you're done. I or arco are not held responsible if your phone is screwed up in the process (very little chance) or
if your heart fails because its loading for a longer period than it should be.
HAVE FUN!
Sent from my 4.1 running Galaxy W.

iDelta said:
Now its the 6.0.3.0 version if I'm not mistaken.
Click to expand...
Click to collapse
In CM9, I see that the ClockworkMod needed is 5.5.xxxx, so wouldn't CM9 crash if i use the 6.0.3.0 version instead of 5.5.xxxx?
And also, does the CM9 have any bugs? Because I saw some in the posts by people about CM10 but not CM9 (refer to links of above comments)
Anyway, it is a pleasure to receive help from you and the person above.

zacszy said:
In CM9, I see that the ClockworkMod needed is 5.5.xxxx, so wouldn't CM9 crash if i use the 6.0.3.0 version instead of 5.5.xxxx?
And also, does the CM9 have any bugs? Because I saw some in the posts by people about CM10 but not CM9 (refer to links of above comments)
Anyway, it is a pleasure to receive help from you and the person above.
Click to expand...
Click to collapse
Well obviously, since its a custom ROM, its bound to have bugs. There's no such thing as a "perfect" ROM. And I have 6.0.1.something CWM and I have flashed every single ROM, from 9-10.1. So it shouldn't be a problem.
Sent from my 4.1 running Galaxy W.

zacszy said:
In CM9, I see that the ClockworkMod needed is 5.5.xxxx, so wouldn't CM9 crash if i use the 6.0.3.0 version instead of 5.5.xxxx?
And also, does the CM9 have any bugs? Because I saw some in the posts by people about CM10 but not CM9 (refer to links of above comments)
Anyway, it is a pleasure to receive help from you and the person above.
Click to expand...
Click to collapse
Man, if you want a stable rom, buy another phone.

iDelta said:
Well obviously, since its a custom ROM, its bound to have bugs. There's no such thing as a "perfect" ROM.
Click to expand...
Click to collapse
I believe I have caused some misinterpretation here. What I mean is that I want to know if there is anything that's not working in CM9. The stuff below is found from the CM9 thread.
What's working:
Audio
Receiving and making calls
GPS
Compass
Proximity sensor
Wifi
Bluetooth
USB mass storage
HW accelerated gui
HW accelerated video
Camera
Torch
Wifi and USB tethering
There isn't anything that's not shown as "not working", so I'm asking you about it just for confirmation.
If there isn't anything, I will flash CM9 soon. :laugh:

zacszy said:
I believe I have caused some misinterpretation here. What I mean is that I want to know if there is anything that's not working in CM9. The stuff below is found from the CM9 thread.
What's working:
Audio
Receiving and making calls
GPS
Compass
Proximity sensor
Wifi
Bluetooth
USB mass storage
HW accelerated gui
HW accelerated video
Camera
Torch
Wifi and USB tethering
There isn't anything that's not shown as "not working", so I'm asking you about it just for confirmation.
If there isn't anything, I will flash CM9 soon. :laugh:
Click to expand...
Click to collapse
Everything works fine.
For CM9 for sure.

Madzix said:
Everything works fine.
For CM9 for sure.
Click to expand...
Click to collapse
Yeah, CM9 is like the most stable out of the three... hardly any bugs
Sent from my 4.1 running Galaxy W.

iDelta said:
Its a kind of recovery, called ClockworkMOD. Now its the 6.0.3.0 version if I'm not wrong...
Linky: here
Okay, the process of installation of a custom recovery is tedious. Link: here DO NOT USE THE FILES IN THIS PAGE. JUST THE INSTRUCTIONS.
Now, flash the ROM (any of the three is fine. I personally recommend CM9 or 10 cus its in its RC stages, which means Resource... something)
The instructions is on the ROM page itself. And you're done. I or arco are not held responsible if your phone is screwed up in the process (very little chance) or
if your heart fails because its loading for a longer period than it should be.
HAVE FUN!
Sent from my 4.1 running Galaxy W.
Click to expand...
Click to collapse
I just noticed something in your post. Just to clarify, RC mean "Release Candidate" not resource something... Just so you know. First alpha's come, then beta's, and right before a FINAL version is released in which most of the bugs are squashed, a release candidate comes to make sure everything is working. If for example, no bugs remain in a release candidate, it is renamed to FINAL as far as I know
However, there are different understanding of these names on the internet. For example, for some, once a product is in a BETA phase, no more new features added from there on. However, that may not be true for CM releases here, I am not sure.
and @zacszy, both CM9 and CM10 are pretty stable. I have not encountered any show stopping bugs but that maybe because of the way I use my phone, as I dont play games. I use it mostly for productivity, internet surfing, couple of youtube videos, music...
Try them all. I am sure you will pick one that suits your needs..

thearif said:
both CM9 and CM10 are pretty stable. I have not encountered any show stopping bugs but that maybe because of the way I use my phone, as I dont play games. I use it mostly for productivity, internet surfing, couple of youtube videos, music...
Click to expand...
Click to collapse
Really appreciate your help @thearif and I would definitely try them out before really settling in with the CM I want

thearif said:
I just noticed something in your post. Just to clarify, RC mean "Release Candidate" not resource something... Just so you know. First alpha's come, then beta's, and right before a FINAL version is released in which most of the bugs are squashed, a release candidate comes to make sure everything is working. If for example, no bugs remain in a release candidate, it is renamed to FINAL as far as I know
However, there are different understanding of these names on the internet. For example, for some, once a product is in a BETA phase, no more new features added from there on. However, that may not be true for CM releases here, I am not sure.
and @zacszy, both CM9 and CM10 are pretty stable. I have not encountered any show stopping bugs but that maybe because of the way I use my phone, as I dont play games. I use it mostly for productivity, internet surfing, couple of youtube videos, music...
Try them all. I am sure you will pick one that suits your needs..
Click to expand...
Click to collapse
Thanks for the definition. Just saying, you can't call it fully stable cuz .... well that's impossible. It is only nearly stable.... you may have not said it but I'm just saying. Haha
Can your single core run 4.1? My Galaxy W can! That's how I sent this!
---------- Post added at 11:30 PM ---------- Previous post was at 11:29 PM ----------
zacszy said:
Really appreciate your help @thearif and I would definitely try them out before really settling in with the CM I want
Click to expand...
Click to collapse
Good luck :thumbup:
Can your single core run 4.1? My Galaxy W can! That's how I sent this!

[Q&A] [ROM][4.4.4][TeamCanjica] CyanogenMod 11.0

Q&A for [ROM][4.4.4][TeamCanjica] CyanogenMod 11.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

question
Hi guys, i have a bug: calling history not show

Problem
It repeatedly giving error com.android.phone has unfortunately stopped . And the ROM is able to search the mobile networks but there is bar in signal strength . Means it not getting the signal .
Rest everything is ok .
PLease help me ASAP .

Does video recording work on your phone? Because I have camera app crashing all the time after switching to video.

Some Question about this ROM
Hi,
my Ace2 is still running under Stock Android 2.3.6. and I would like to Upgrade to CM.
For me stability and a working phone are more important than having the latest android Version, so my question is - which CM Version would you recommend? CM11 or is CM10.2 more stable? And is the latest version also the most stable one?
Is it correct that the only issue with CM11 is the Live streaming problem and with CM10.2 the memory leaks reported by some users- or are there more problems with these ROMS? A well working GPS is also important for me - is this the case?
And how difficult would it be to go back to stock 2.3.6. if CM is not working well for me?
Sorry for all the question and thanks in advance!

bootloop on the latest build from Rox
stuck on boot loop as is:
http://forum.xda-developers.com/showpost.php?p=56027724&postcount=5377

cm-11-20140807-UNOFFICIAL-codinap from @ace2nutzer
Install the firmware, reset the smartphone, then GAPS. If all at once, when you start on selecting the language setting is not. This, in my case, I tried several times. @ace2nutzer when to expect an update of your firmware

Hello
i have the i8160L,are the links you gave working on that version?
also if its working and i root that cm11,can i get back to my original firm later?
thanks

Bootloop
Rox, are you going to be fixing teh bootloop in the last build?
Also: the call log is empty, is there any fix for that?

Blackscreen
I want to record a logcat showing a black screen ocurring on wake up, with the s6d driver, in order to help in the resolution of the bug...
What's the priority level I should set for the catlog? Verbose, Debug, Info, Warnings, Errors, or Fatals?

Reboot loop with 1014 update
WARNING: I'm stuck in a reboot loop after updating to the recent 1014 version. Can't even get into recovery mode anymore. Flashed stock rom, installed CM again: same picture.

Grmblprmf said:
WARNING: I'm stuck in a reboot loop after updating to the recent 1014 version. Can't even get into recovery mode anymore. Flashed stock rom, installed CM again: same picture.
Click to expand...
Click to collapse
Flash chrono kernel..1014 build got a kernel broken...

@hackstorm1989
I have the GT-I8160L too.
This ROM specifically i haven't tried yet, but I've installed 2 different builds of NovaFusion CM11 (http://forum.xda-developers.com/showthread.php?t=2568105) and now I'm running J-TEAM AOSP (http://forum.xda-developers.com/showthread.php?t=2588054).
As TeamCanjica, both these ROMs are for the GT-I8160, but can be installed on GT-I8160L by changing the lines in the updater-script of the ROM (META-INF/GOOGLE/ANDROID/) where it checks the model of the device. I also read that the tee folder (system/lib/) of the ROM must be replaced by a copy of a tee folder from a running GT-I8160L firmware with SIM and carrier services properly working.
I've followed this guide:
http://brasildroid.com.br/showthread.php?t=23729
So, just by checking the updater-script of teamcanjica CM11, i GUESS it could be installed on GT-I8160L through the same 2 steps that i did with the other cited ROMs.
Also, I remember seeing other members running these ROMs on the L version while reading these 3 threads. I really wanna know what exactly differences are between these 2 device versions.
Please anyone let me know and correct me if I've posted any wrong information.

@soraxx
I can´t post in the main thread yet (10 post treshold), but maybe you read this or someone can copy this into the main thread.
I had exactly the same problem (audio but no video picture) and a simple change from stock browser to firefox solved it - Maybe it works for you too.

This should be main thread from now on

Same problem

Bootloop
14.10 bootloop

@ace2nutzer
I don´t agree with your statement that everything is working with the 07/08 build. I am using that build and the camera video recording is definitely bugged.

Elder666 said:
@ace2nutzer
I don´t agree with your statement that everything is working with the 07/08 build. I am using that build and the camera video recording is definitely bugged.
Click to expand...
Click to collapse
read this carefully:
http://forum.xda-developers.com/showpost.php?p=56171431&postcount=5436

Hi guys,
In stripped versions I notice camera quality and time of battery are worse... I'm going to try the build made for ace2nutzer 07-aug-2014 and stay on it by now.

[Q&A] [ROM] [NIGHTLY] [KitKat] [4.4] CyanogenMod 11.0 nightlies

Q&A for [ROM] [NIGHTLY] [KitKat] [4.4] CyanogenMod 11.0 nightlies
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

Hi, please see my post in old thread

I am having a problem with this rom. It runs great and is surprisingly fast and smooth. But I just saw in F-Droid that the rom reports that it does not provide android.hardware.telephony. This wonders me because I am able to call.

Is there any possible to have 5.0 running on our device?
Is there any possible to have 5.0 running on our device? From a old user holding a G2

error 7 trying to install kitakt 4.4
Can someone please help me?
I'm getting the status 7 error message when trying to install kitkat 4.4 on my desire z. Does anyone know how I can fix this error? I have clockwork mod 5.0.2.7 installed.
It says
(status 7)
Installation aborted
I have tried various other roms, and the only one that works is cyanogen mod 7.2
groan.

sonmamnibus said:
Can someone please help me?
I'm getting the status 7 error message when trying to install kitkat 4.4 on my desire z. Does anyone know how I can fix this error? I have clockwork mod 5.0.2.7 installed.
It says
(status 7)
Installation aborted
I have tried various other roms, and the only one that works is cyanogen mod 7.2
groan.
Click to expand...
Click to collapse
update your recovery
here is link
http://forum.xda-developers.com/showthread.php?t=1377754

hamxa266 said:
update your recovery
here is link
http://forum.xda-developers.com/showthread.php?t=1377754
Click to expand...
Click to collapse
A useless app that does nothing.
Is there a newer version of clockworkmod in .zip format available?

sonmamnibus said:
A useless app that does nothing.
Is there a newer version of clockworkmod in .zip format available?
Click to expand...
Click to collapse
The easiest way to install recovery is by using that app , any way if your not able to install via application then you must try fastboot or use secondary app like flashify to install recovery . And i really don't know about flash able zip file files for recovery !!

hamxa266 said:
The easiest way to install recovery is by using that app , any way if your not able to install via application then you must try fastboot or use secondary app like flashify to install recovery . And i really don't know about flash able zip file files for recovery !!
Click to expand...
Click to collapse
zip files are easy. . . . download, boot into clockworkmod, select install zip fiel, boom! done.
This useless app won't even install. all it does is give me stupid information about what a release candidate is...well least I get my refund. back to square one.
Can anyone help me install a new version of clockwork mod? for desire z/G2 PLEASE?

Hi, ok i will try to help you guys...
Its a long time ago, but probably this is a easy way.
https://market.android.com/details?id=ext.recovery.control&feature=search_result
Try, to install 4ext, an than push recovery install in this app.
Thats it.
Lg ivi
---------- Post added at 11:22 AM ---------- Previous post was at 11:17 AM ----------
Ops, i see, the link above tells the more or less the same...
Hmmm, ok probably you guys knew to less of root,bootloader and flashing.
Ok, maybe this will help you
http://forum.xda-developers.com/showthread.php?t=1682479
Lg ivi

I have one question and a short unrelated diatribe. My question is: I just rooted a G2, and this was the first rom I installed. Occasionally I'm losing service/gps etc and I'm assuming I just need to update the radio. Through my research I understand I'll need a matching RIL file for my rom to accompany the radio firmware update. How would I do that for this rom? Or do I need to?
On an unrelated note, I'd like to say thanks so much for continuing to provide nightlies for this phone. I just bought a G2 because the form-factor/hardware feature-set is perfect for me and is also super rare/no longer produced (qwerty slide-out kb, trackpad). Having the hardware feature-set along with up-to-date functional software to boot is HUGE for me. Especially considering the latest nightly upload patched stagefright. KitKat runs almost flawlessly considering the fact that I overclock to 1.5Ghz (didn't seem to effect battery life), reduce animations, don't use the gapps package / google play framework and shy away from bloated apps (besides spotify). With a little thought and creativity in configuration and app selection I have no major issues. For example, good ol brut mod gmaps runs super fast (with some bugs). The classic rolle tube modded youtube app works better than any version of google's youtube app ever has and it even lets me shut off the screen when listening to music.
I've always been bothered by the fact that the android after-market rom dev community seems to mostly abandon projects and let them drift into link-rot hell about as fast as manufacturers put out new phones. No disrespect to the people volunteering their time to make old phones last a couple more years, but when a dev puts themselves out there as a service provider I believe there's a certain degree of responsibility that comes with the implied trust and reliance others are giving the dev by using their rom. So anyways thanks for keeping this one alive. If development ever dries up for the G2 I'll likely roll up my sleeves and figure out rom dev for myself.
---------- Post added at 02:49 PM ---------- Previous post was at 02:22 PM ----------
Nevermind, I figured out updating the radio thanks to this post:
http://forum.xda-developers.com/showpost.php?p=58542873&postcount=57
But my diatribe still applies. Thanks!!!!

hardwarekeyboard problem
hello,
I've installed cyanogenmod 11.0.
It is not possible to type numbers or symbols with fn+letter on the hardware keyboard. exept [email protected] gives a !.
I tried serveral language mappings but it is always the same result.
thanks
Led

[Q&A] [ROM] [endeavoru] [4.4.4.] [nov7] [CM11-based] **crDroid**

Q&A for [ROM] [endeavoru] [4.4.4.] [nov7] [CM11-based] **crDroid**
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [endeavoru] [4.4.4.] [nov7] [CM11-based] **crDroid**. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

DSP error
not sure if it's just me but everytime I open the music app and play music the DSP manager always crashes.

DSP manager
Hello, I just got a new fresh install. EVERYTHING wiped out, even sd card. I'm getting force closes when trying to play music. DSP Manager is not working as it should. Is this a known issue or only me? Thank you, this rom is great!

DSP error logcat
Hello, here's the logcat, not sure if well captured, it is my first time capturing logcats. Captured with CatLog.

3g not working and apn keeps unloging me from network, when disabled no probs except no internet... Any ideas?
E: switched wifi hotspot on and disabled adb and it worked...
E2: guess it is just usb debbuging, works fine with bouth off
E3: had some more weird issues then reinstalled rom and all works fine now. I love it, fast and stable. [emoji2]

Hi, i have got this rom for 2 weeks. At the beginning it was fast etc. Now it cant even kepp launcher in memory? When i want to open any app for few mins, then i wan to back to homescreen it is loading all apps and widgets.. Also i cant back to my apps which i used few seconds/minutes ago cuz it's loading like a new open. When i had viperx 4.2.2 it could keep uc browser and some pages for few weeks, and when i wanted to open, it took 1 second for me. Now im feeling like on my 1st galaxy spica.
Is that normal?
I'm using clean master and it does nothing.
I have to change rom or something?
Second Q, are videos in browsers woring ok for You? I have to restart HOX sometimes if i want to watch someting. And is there any solution to watch videos like on PC? I mean, my player is everywhere the same. It's annoying becouse, sometimes i have to change resolution but i cant, also i cant turn on full screen mode second time, i have to releod page, then watch it on full screen.
Thanks,

A noob in need of help here
Hi there,
I tried to install your latest version crdroid-5.0.2-20150121-endeavoru on my HTC One X but I got only an infinit HTC image. I am not very familiar with this things but I think I did what the instructions said:
- start on recovery mod (I am using TWRP v2.6.0.0, the one I used the only time I installed a custom rom);
- installed "crdroid-5.0.2-20150121-endeavoru" and "pa_gapps-stock-5.0.1-BETA12-20150116-signed" and did a data wipe in the end;
- reboot.
As I said, after restarting, I get the HTC start image and nothing progresses. Any idea what I am doing wrong (and how to make my phone back to work)?
Thanks a lot.

wi-fi problem
hi there .. crDroid 5.0.2
I seem to be having problems with the wi-fi when I change the DPI. I set it to 240, it restarts just fine but the wi-fi doesn't turn on anymore. any solutions? thanks

uaeted said:
Hi there,
I tried to install your latest version crdroid-5.0.2-20150121-endeavoru on my HTC One X but I got only an infinit HTC image. I am not very familiar with this things but I think I did what the instructions said:
- start on recovery mod (I am using TWRP v2.6.0.0, the one I used the only time I installed a custom rom);
- installed "crdroid-5.0.2-20150121-endeavoru" and "pa_gapps-stock-5.0.1-BETA12-20150116-signed" and did a data wipe in the end;
- reboot.
As I said, after restarting, I get the HTC start image and nothing progresses. Any idea what I am doing wrong (and how to make my phone back to work)?
Thanks a lot.
Click to expand...
Click to collapse
Did you flash the boot.IMG through fastboot ??

paulh1978 said:
Did you flash the boot.IMG through fastboot ??
Click to expand...
Click to collapse
Hum no Didn't know I needed to do that... Do do I flash the boot.img and where is that file?
Thanks a lot paulh1978.

uaeted said:
Hum no Didn't know I needed to do that... Do do I flash the boot.img and where is that file?
Thanks a lot paulh1978.
Click to expand...
Click to collapse
If you put the ROM zip on your PC and open the zip file (not unzip) you'll see a boot.IMG inside,extract the boot.IMG to your pc. I'm assuming you've got the fastboot controls on your PC.

Link for the rom is broken guys

Move app to SD
No way no way to move app to sd in this rom?
---------- Post added at 12:34 AM ---------- Previous post was at 12:26 AM ----------
No way no way to move app to sd in this rom?

Help me!!!
Hello, still no way to move app to SD, always tells me that is full and no space ...

HI
When a new version is offered ??

Thank you very much.

Fixes & futures possible?
Hellow everyone,
recently I've installed the ROM wich is a great build I must say. The experience is smooth and I haven't got any random reboots. But when I reboot the phone, it gets stuck on the HTC logo. After 3 reboots it will work normal again. Sometimes the WIFI doesn't work after a reboot and I have to reboot it again.
Not experienced anymore in build 20150210
Another problem I have is that the AdBlocker isn't working (I still have advertisements in apps) although I've downloaded the latest host files.
Still not working in build 20150210
Something that bugs me is the fact that I can't choose wich page of my homescreens is my home-homescreen.
Available in build 20150210
The last things that in my opinion are missing are a good (digital) clock widget and a simple mail client. In the original Sense ROMs the clock is fantastic and the mail client is just good. I'm now using K-9 mail, but I think there are too many opions in it. (suggestions?)
I installed the wrong Gapps
Probably some things are fixed in the newest build, but I can't find the changelog of it on XDA. It's there! And how do I update my ROM (I am used to OTA updaters, idea?)? Just dirty install the new ROM?
The answer is dirty flashing. (just install the ROM and clear cache and dalvik (I guess))
Beware, for the new storage layout read this post:
http://forum.xda-developers.com/htc-one-x/orig-development/storage-layout-hox-endeavoru-t3022358
In advance thanks for your work and answer!
Keep up the good work! This is the best experience I had so far with an AOSP (had CM, but didn't work that well).
------
I'm using the ROM's boot.img, unmodified ROM (crdroid-5.0.2-20150131-endeavoru.zip) and TWRP 2.7.1.0
I'm using the ROM's boot.img, unmodified ROM (crdroid-5.0.2-20150210-endeavoru.zip) and TWRP 2.8.1.0

releasenotes?
Hi!
Thanks for your great work on this rom.
Is there a list of changes from the previous release?

Enjoying this rom
Thank you team for a very good rom. I have an HTC One X [Endeavoro] and have experimented with many roms over time. I always fall back onto JB Sense 5 Blade Elite 2.0 with Lyapota mods flashed.
The CM KitKat roms just didn't tick all the boxes for me. Functionality v battery life.
But I am so impressed with this Rom, especially so early in the development.
With crdroid 5.0.2-20150210, I am running the native launcher with PA Gapps mini. Touch recovery 6.0.4.8 gave me a problem restoring the back up but after allowing root access in dev options (I don't know if that made a difference) and flashing twrp-recovery-hox-2.8.1.0 the twrp back up restored perfectly. The Rom is so smooth, battery life is great and everything works!
Congratulations team

Mad Prof said:
Hellow everyone,
recently I've installed the ROM wich is a great build I must say. The experience is smooth and I haven't got any random reboots. But when I reboot the phone, it gets stuck on the HTC logo. After 3 reboots it will work normal again. Sometimes the WIFI doesn't work after a reboot and I have to reboot it again.
Another problem I have is that the AdBlocker isn't working (I still have advertisements in apps) although I've downloaded the latest host files.
Something that bugs me is the fact that I can't choose wich page of my homescreens is my home-homescreen.
The last things that in my opinion are missing are a good (digital) clock widget and a simple mail client. In the original Sense ROMs the clock is fantastic and the mail client is just good. I'm now using K-9 mail, but I think there are too many opions in it. (suggestions?)
Probably some things are fixed in the newest build, but I can't find the changelog of it on XDA. And how do I update my ROM (I am used to OTA updaters, idea?)? Just dirty install the new ROM?
In advance thanks for your work and answer!
Keep up the good work! This is the best experience I had so far with an AOSP (had CM, but didn't work that well).
------
I'm using the ROM's boot.img, unmodified ROM (crdroid-5.0.2-20150131-endeavoru.zip) and TWRP 2.7.1.0
Click to expand...
Click to collapse
Something that bugs me is the fact that I can't choose wich page of my homescreens is my home-homescreen.
If you hold your finger on the screen and the pages display, there is a small home icon at the top of your current home screen, just move it to the one you want, It works.