Develop Bugs

[STOCK ROM] *LEAKED* LG Optimus G Jelly Bean 4.1.2 KOREAN F180 S K L (KDZ)

LG Optimus G F180 S K L Jelly Bean 4.1.2 KDZ
S Variant
F180S20B_00.kdz / MIRROR
K Variant
F180K19G_00.kdz / MIRROR
L Variant
F180L20F_00.kdz / MIRROR
Code:
[B][COLOR="Red"]Disclaimer:[/COLOR][/B]
download & use these files at your own risk. I take no responsibility...
Links are active. thanks goes to landlord for the mirrors
[B][COLOR="Red"]WARNING:[/COLOR][/B] [I]If you don't have a Korean Phone and you flash
these images you might risk bricking your modem / radio meaning if
you flash back to your original stock you wont have working radio.
hop on irc (freenode #lg-optimus-g)
for all chatters and if you run into problems someone
is always willing to help.
[/I]
I decided to give it a shot and installed the LG-F180S Variant
on my Bell E973.. I haven't played much with it. I took a few
screenshots and did a system dump . I installed all 3 and
dumped the system of S and L. Atm there is no root.

So, is there any info about these roms?

Tim4 said:
So, is there any info about these roms?
Click to expand...
Click to collapse
Thats the leaked 4.1.2 rom
With reference to testers no differences are noted
Seems zero boost on performance
Main change visually noted is the weather widget

Any screenshots?

Anyone try this please? Some screenshots ?:good:

I can try it. But you should explain what a hell is .kdz and how it can be installed first.

Tim4 said:
I can try it. But you should explain what a hell is .kdz and how it can be installed first.
Click to expand...
Click to collapse
See here for the instructions:
http://forum.xda-developers.com/showthread.php?t=2010624
Basically just download the kdz from above and:
2) Make sure you have LG United Drivers already installed, otherwise download from below
http://www.mediafire.com/?82nt1aeh04aqa3m
3) Download LG KDZ Updater
http://www.mediafire.com/?sj5y073xal03ntw
5) Put your Optimus G into Download Mode by switching it off, attaching the usb cable to the phone, holding both the up and down volume buttons at the same time and lastly inserting the usb cable into the computer; wait for the drivers to finish loading if doing it for the first time.
6) Unzip the downloaded updater zip file and run KDZ_FW_UPD.exe. Use the settings below
Type: 3GQCT
Phone Mode: CS_Emergency
KDZ file: navigate to the folder which you have saved the downloaded KDZ from the step (1)
Click Launch Software Update and wait for the flash process to finish
7) Your phone will restart itself when IParam = 90 is displayed and proceed slower until you see IParam=1 again (which signals the end of flash, you can safely exit the program then and remove the cable from the phone). If phone boots up normally, congrats, skip the steps below and proceed to use the phone as per normal.
Click to expand...
Click to collapse
Also you need to wipe /data. If you are unlocked you need to relock. After you flash it please hop on irc (freenode #lg-optimus-g), we'd like you to pull some images (boot, system)!

Just tried and I won't recommend you guys to install this
Zero improvement
Some say better battery performance but noting special for me
And the phone is lagger than 4.0.4

hkhkhkhk said:
Just tried and I won't recommend you guys to install this
Zero improvement
Some say better battery performance but noting special for me
And the phone is lagger than 4.0.4
Click to expand...
Click to collapse
Which version do you have?
Sent from my LG-E971 using Tapatalk 2

Elisha said:
Which version do you have?
Sent from my LG-E971 using Tapatalk 2
Click to expand...
Click to collapse
F180S

Some pictures:

Is this build rootable?
I might try it out, got a couple more days of vacation to play around with it. We'll see.
Definitely leaked/ unofficial. I checked the LG .kdz server and it still shows F180L10p as the most current for my device.
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=<your IMEI here>

chevro1et said:
Is this build rootable?
I might try it out, got a couple more days of vacation to play around with it. We'll see.
Definitely leaked/ unofficial. I checked the LG .kdz server and it still shows F180L10p as the most current for my device.
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=<your IMEI here>
Click to expand...
Click to collapse
Get on irc, we can root you there.

From the looks of all the screenshots I notice that none of them have a signal for phone/data....is it because of different network bands used in Korea?

Can someone pull the recovery partition from a device running the leak? We would like to test if the 3.4 kernel will run on a stock phone without any of the other firmware flashed to it.

metal_god69 said:
From the looks of all the screenshots I notice that none of them have a signal for phone/data....is it because of different network bands used in Korea?
Click to expand...
Click to collapse
Screenshot says no sim card in the phone.

does anyone have a system dump they can provide for me?

XsMagical said:
does anyone have a system dump they can provide for me?
Click to expand...
Click to collapse
ot sure which letter he used, but someone in the sprint section flashed and dumped one
kc_exactly said:
Thanks to Elisha here is the korean kernel.
https://www.dropbox.com/s/hdfl15d7j4albhm/boot.img
And system dump.
https://www.dropbox.com/s/na0gqlhdnmduspf/JB.ZIP
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse

Thanks but the dump is a little to small. I downloaded it and it seems to be corrupt. I think it needs to be around 700mb-800mb
Stroked from my Dirty Nocturnal'd Optimus G

you need a dump via adb? or another method? ill setup adb and flash it to get a new dump if needed

[TOT] Sprint LS980 ZVC 4.4.2

The Sprint ZVC 4.4.2 .TOT is now available on the Codefire servers. TOT is used along with a .dll in LG Flash to install the stock firmware. Running this WILL erase your data including whatever is on the internal SD card.
I had to pay for this.. so donations are welcomed :highfive:
TOT (ZVC zip.. unzip it FOOL!) and .DLL can be found HERE.
Guide to use this can be found HERE. Yes, it's for Verizon but it can be loosely followed.. just replace the verizon stuff with the Sprint files.

Autoprime first rooting with your ioroot 25 now this your such a help for Sprint and others
Sent from my LG-LS980 using XDA Premium 4 mobile app
---------- Post added at 11:50 AM ---------- Previous post was at 11:36 AM ----------
So wait I just go thought on LG flash tool
Sent from my LG-LS980 using XDA Premium 4 mobile app

Donation Details - Confirmation number: 6CP664455L4491501
Thanks for all the support.

Noob question: If I use this TOT to upgrade my ZV7 to ZVC, can I downgrade it back to ZV7 using ZV7 TOT? Asking since I use the permanent unlock and if it does not work on ZVC, I will have to downgrade it.

Pat123 said:
Noob question: If I use this TOT to upgrade my ZV7 to ZVC, can I downgrade it back to ZV7 using ZV7 TOT? Asking since I use the permanent unlock and if it does not work on ZVC, I will have to downgrade it.
Click to expand...
Click to collapse
I have not done it, but I believe others have confirmed you can still downgrade.

Permanent GSM unlock will be erased if you use flash tool.
I took the OTA without root with stock recovery without GSM unlock.
Managed to root using ioroot25, flashed CDMA on NV got data for CDMA, then tried the unlock for GSM. Did not work. Now after messing around I managed to unlock GSM with data. Also found that it's either GSM or CDMA. Both for now will not work together like before.
Sent from my LG-LS980 using Tapatalk

Unrelated to the update by phone decided to brick itself while doing a backup.
I decided to go ahead and do the upgrade while I am restoring. I can get into download mode, but my computer can no see it. Installed Drivers already, just does not show up in device manager.
Anyone have any ideas on how I can get this going?

Is there a version that won't wipe all data from the phone? i made a backup but forgot to drop box it so now i need to save that if possible and then restore the firmware

pvinodnayak said:
Unrelated to the update by phone decided to brick itself while doing a backup.
I decided to go ahead and do the upgrade while I am restoring. I can get into download mode, but my computer can no see it. Installed Drivers already, just does not show up in device manager.
Anyone have any ideas on how I can get this going?
Click to expand...
Click to collapse
Change the port number for the device in the Microsoft device manager...I can't remember if it is port 41 or port 43. Give both a try!

keezy1986 said:
Change the port number for the device in the Microsoft device manager...I can't remember if it is port 41 or port 43. Give both a try!
Click to expand...
Click to collapse
It is port 41, but I can not change it as Windows doesn't recognize that a device has been plugged in at all.

New to TOT and LG in general, would I be able to use this to come from ZV8? I assume that TOT's completely redo everything so it doesn't matter (to a degree) what's on it before (except in the case of downgrading). Thanks!

lil_jimmy_norton said:
It is port 41, but I can not change it as Windows doesn't recognize that a device has been plugged in at all.
Click to expand...
Click to collapse
Try different drivers. I had to use the TOT method found here and it worked for me with no issues. http://forum.xda-developers.com/showthread.php?t=2432476

This worked where the modified OTA failed. I did need to unplug and re-attach the phone after the driver sorted itself out.
Thank you!

Hope someone makes a flashable pre rooted ROM.zip from this.

lil_jimmy_norton said:
Unrelated to the update by phone decided to brick itself while doing a backup.
I decided to go ahead and do the upgrade while I am restoring. I can get into download mode, but my computer can no see it. Installed Drivers already, just does not show up in device manager.
Anyone have any ideas on how I can get this going?
Click to expand...
Click to collapse
Try a diff computer.
Sent from my LG-LS980 using Tapatalk

pvinodnayak said:
Permanent GSM unlock will be erased if you use flash tool.
I took the OTA without root with stock recovery without GSM unlock.
Managed to root using ioroot25, flashed CDMA on NV got data for CDMA, then tried the unlock for GSM. Did not work. Now after messing around I managed to unlock GSM with data. Also found that it's either GSM or CDMA. Both for now will not work together like before.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
so if I flash to zvc, knowing the unlock will be erased, then root the phone using ioroot 25, follow the steps of permanent unlock, will it work on GSM again?

Gsm unlock
obie992 said:
so if I flash to zvc, knowing the unlock will be erased, then root the phone using ioroot 25, follow the steps of permanent unlock, will it work on GSM again?
Click to expand...
Click to collapse
Give it a shot. must work!!

can someone upload it to a torrent, i have a slow internet here, just failed @ 50% progress

autoprime said:
The Sprint ZVC 4.4.2 .TOT is now available on the Codefire servers. TOT is used along with a .dll in LG Flash to install the stock firmware. Running this WILL erase your data including whatever is on the internal SD card.
I had to pay for this.. so donations are welcomed :highfive:
TOT (zvc .zip.. unzip it fool!) and .dll can be found HERE.
Guide to use this can be found HERE. Yes, it's for Verizon but it can be loosely followed.. just replace the verizon stuff with the Sprint files.
Click to expand...
Click to collapse
what's the MD5/SHA1 sum for the TOT so I can be sure my download is good?

Wonder if this happened to anyone else. First I installed the LGFlashTool 1.8, then set my clock to 4/1/2012 and opened LGFlashTool. It says something about LG FLASH TOOL ERROR LG USB/PARELLEL. went ahead anyway and selected the .dll and .tot files and changed all the ports per instructions. Long story short, the files flashed but showed failed at 94% but phone had booted to accessibility settings and was talking to me in the weird robotic voice. I went ahead and disconnected and set up phone then rooted with ioroot25. all seems to ok but I wonder if the fail is going to be a problem somewhere down the line. I have not noticed any problems. Any suggestions?

[Q] Need help rooting Lg G3 Vs985

So Friday i went to verizon and bought me a new LG G3 phone, 32G memory 3G RAM, you know the good **** LOL. Well when i got home i wanted to root the phone but when i looked it up there was many options, IOROOT, TowelRoot, and Stump Root. So i tried towel root on the phone but when i clicked the button towel root said my device isnt compatible and my phones build is the VS98510B. So at that point i decided to try IOROOT. When i launched the batch file i made sure i made myself a developer, got the proper drivers, made it connect via usb and set the phone connection to Ethernet. Well in the batch file it said everything was good and that i just needed to click any button to continue well i did that but when i clicked a button it simply closed the batch file. All i clicked was the space bar and it closed. Stump root isnt compatible and im afraid to use bruteforce mode. Any one got any help with this? Andriod Kitkat 4.4.2

Use the brut force method in stump. Takes about 5 minutes.

TonikJDK said:
Use the brut force method in stump. Takes about 5 minutes.
Click to expand...
Click to collapse
But i mean is it safe? Im kinda new to the whole android rooting scene i use to use iphones and **** so i dont wanna break this phone since i just got it

Worked for me and I have not seen a single report of any problems.

TonikJDK said:
Worked for me and I have not seen a single report of any problems.
Click to expand...
Click to collapse
So when i root it do i need to back up anything? Ive heard of whats called TWRP but idk what that is

I used stump root. My phones still works. You can't install twrp because bootloader is still locked, have to wait for a way to unlock it.

ToF_Itachi said:
So when i root it do i need to back up anything? Ive heard of whats called TWRP but idk what that is
Click to expand...
Click to collapse
Read a bit here TWRP is a recovery and backup software for when you flash a custom ROM.. You're not flashing any custom ROMs just yet.. So... I don't think you need to backup anything just yet. After you root the phone you can use TWRP to backup your current stock ROM .. Good luck ..
:good:

I used ioroot with no problems. Check out this vid, pretty straight fwd on what you need to do.
sent from my VZW VS985 aka LG G3

Showtek1980 said:
Read a bit here TWRP is a recovery and backup software for when you flash a custom ROM.. You're not flashing any custom ROMs just yet.. So... I don't think you need to backup anything just yet. After you root the phone you can use TWRP to backup your current stock ROM .. Good luck ..
:good:
Click to expand...
Click to collapse
Oh okay thanks! Well i guess im off to use the stump root and use brute force

R0ck.em 5ock.em said:
I used ioroot with no problems. Check out this vid, pretty straight fwd on what you need to do.
sent from my VZW VS985 aka LG G3
Click to expand...
Click to collapse
how were you able to use ioroot with yours? Like when i tried to use it it would just close the batch file and wouldnt even work when i tried it.

ToF_Itachi said:
Oh okay thanks! Well i guess im off to use the stump root and use brute force
Click to expand...
Click to collapse
My pleasure Hope you can find root using the desired software.. I'm in Korea..using the F400k but the latest update (v10l) couldn't find root using any of the available tools.. so.. I had to downgrade to the previous (v10g) and got root again. :victory:

Showtek1980 said:
My pleasure Hope you can find root using the desired software.. I'm in Korea..using the F400k but the latest update (v10l) couldn't find root using any of the available tools.. so.. I had to downgrade to the previous (v10g) and got root again. :victory:
Click to expand...
Click to collapse
Yeah im using the Verizon Vs985 v with the 10B version. so for me idk which way to go when it comes to rooting software

After you clicked to continue in the batch file, did yout phone boot into recovery?
sent from my VZW VS985 aka LG G3

ToF_Itachi said:
Yeah im using the Verizon Vs985 v with the 10B version. so for me idk which way to go when it comes to rooting software
Click to expand...
Click to collapse
This has ALWAYS worked well for me (Besides with the latest version update)... But I don't know if it would work on your device.. Try what you have. If all fails then give this a shot

R0ck.em 5ock.em said:
After you clicked to continue in the batch file, did yout phone boot into recovery?
sent from my VZW VS985 aka LG G3
Click to expand...
Click to collapse
no the batch file simply closed on me while my phone sat there still on the home screen

Downgrade from MM to LL with LGUP is possible!

Just wanted everybody to know that you CAN downgrade your MM LG G4 for Verizon by using LGUP.
And this is how...
1). Download all The Files Below!
1) Firmware Files - Click HERE!
Or Here LGKDZ.com for your exact match KDZ for your model
2) Download LG Drivers - LG Drivers Here - 10.9 Mb
2.1)Verizon Drivers (Verizon Only)LG_VZW - 7.8 Mb
3..LGUP can be found on this website LG UP DOWNOAD
You have to sign into one of your accounts and like the page for them to open the downloads in the middle of the page.
4. install the drivers then the .msi file for LGUP. Usually there is a DLL file and the LGUP application, install the .DLL file then install LGUP.
5. First make sure that your phone is showing up on LGUP, if not make sure you have USB debugging enabled and the you are connected with MTP.
6. Find your .kdz file, and don't press start VERY IMPORTANT!!, Exit out of the application and then REOPEN LGUP and your 13b.KDZ should still be in the box at the bottom.
7. Now just press start and wait for it to do it's magic.
And now your back on LL and you can get back to rooting this phone.
And just so people know it is not possible to downgrade from LL to KK, it will brick your phone for some reason, and trust me I had to send mine back and get a knew one, nothing would get it to work again!
So that's how you get back to LL from MM, which seems to be the only way to have root at the moment...
One more thing, I was able to transfer the files for the effortless root on MM but you can't do any send_command.exe commands because it just says FAIL. but it did switch the system software from Official to Modified so it did something just not what I wanted it to do....

If there's anyone wondering why this works, it's because both the 13b and 24c kdz's both have the same qfuse number, so the bootloader accepts both without bricking. If Verizon ever puts out an update that increments the qfuse value and you take it, you won't be able to downgrade to 13b or 24c.

I have the kdz file but it wont let me put it on lgup. It's looking for a .tot file. Help would be greatly appreciated
Nevermind. Figured it out

would this work with h811

mrewn said:
would this work with h811
Click to expand...
Click to collapse
This is the Verizon VS986 LG G4 section .

shoes22 said:
If there's anyone wondering why this works, it's because both the 13b and 24c kdz's both have the same qfuse number, so the bootloader accepts both without bricking. If Verizon ever puts out an update that increments the qfuse value and you take it, you won't be able to downgrade to 13b or 24c.
Click to expand...
Click to collapse
Thank you for the info! Just curious: how do you check the value of qfuse?

I did this on a Canadian variant H812 and it worked. Rooted right after and that worked too. I am a happy camper.
I loaded H81210n.
Anyone reading do note that I did not use the Verizon files above.
---------- Post added at 06:39 PM ---------- Previous post was at 06:34 PM ----------
duvelsuper said:
I have the kdz file but it wont let me put it on lgup. It's looking for a .tot file. Help would be greatly appreciated
Nevermind. Figured it out
Click to expand...
Click to collapse
What you must do is tick the update and select the kdz file. Then close LGUP, open it again and select refurbish and kdz file should be there. Start the load.
This phone with L and root is perfect. No M for me until root (if it happens). Really enjoy having the changed DPI with root and no permanent notification for Priority mode.

You can DL from here, without "liking" anything. http://www.droidopinions.com/download-lgup-tool/

Colchiro said:
You can DL from here, without "liking" anything. http://www.droidopinions.com/download-lgup-tool/
Click to expand...
Click to collapse
Or get it from this XDA thread: http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803 where those other sites probably got it from .

divineBliss said:
Or get it from this XDA thread: http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803 where those other sites probably got it from .
Click to expand...
Click to collapse
*edit* sorry did not mean to quote the person above me. I'm asking about actually getting from MM back to LP
Hate to ask this but has anyone verified this? I'm wanting to do this to mine tonight but I don't have near the experience a lot of others do here.

I did this without any problems at all
phonepie said:
*edit* sorry did not mean to quote the person above me. I'm asking about actually getting from MM back to LP
Hate to ask this but has anyone verified this? I'm wanting to do this to mine tonight but I don't have near the experience a lot of others do here.
Click to expand...
Click to collapse
I did this without any problems at all

It's very easy. Just load stock kdz with LGUP. I even rooted and all that after.
Sent from my LG-H812 using Tapatalk

tulio25 said:
I did this without any problems at all
Click to expand...
Click to collapse
thanks!
---------- Post added at 12:21 AM ---------- Previous post was at 12:20 AM ----------
milan187 said:
It's very easy. Just load stock kdz with LGUP. I even rooted and all that after.
Sent from my LG-H812 using Tapatalk
Click to expand...
Click to collapse
thanks!

silly question but will i lose all data on my phone if I do this?

stephen293 said:
silly question but will i lose all data on my phone if I do this?
Click to expand...
Click to collapse
I haven't done it just yet. And I know I'm not the smartest here. But to my knowledge yes you will lose everything. So always good to back up all your files. I've got all my photos backed up to google photos. over 5000 lol. But yeah from what I understand it's the same as doing a factory reset except instead of factory resetting back to MM you're factory resetting to LP.

stephen293 said:
silly question but will i lose all data on my phone if I do this?
Click to expand...
Click to collapse
(Request to a moderator below my response to stephen293)
OK, I did mine last night and using the refurbish mode as said does in fact delete all data.
((TO MODERATOR CAN WE GET THE ORIGINAL POST UPDATED TO INCLUDE THAT TO LOCATE THE KDZ FILE YOU NEED TO FIRST TICK THE UPGRADE CIRCLE)) I found it down the thread, But just figured it would be easier for others if it was included in the original post. Thanks

Big ups to everyone who made this happen!

Link not working kdz site down
Azweezey said:
Just wanted everybody to know that you CAN downgrade your MM LG G4 for Verizon by using LGUP.
And this is how...
1). Download all The Files Below!
1) Firmware Files - Click HERE!
Or Here LGKDZ.com for your exact match KDZ for your model
2) Download LG Drivers - LG Drivers Here - 10.9 Mb
2.1)Verizon Drivers (Verizon Only)LG_VZW - 7.8 Mb
3..LGUP can be found on this website LG UP DOWNOAD
You have to sign into one of your accounts and like the page for them to open the downloads in the middle of the page.
4. install the drivers then the .msi file for LGUP. Usually there is a DLL file and the LGUP application, install the .DLL file then install LGUP.
5. First make sure that your phone is showing up on LGUP, if not make sure you have USB debugging enabled and the you are connected with MTP.
6. Find your .kdz file, and don't press start VERY IMPORTANT!!, Exit out of the application and then REOPEN LGUP and your 13b.KDZ should still be in the box at the bottom.
7. Now just press start and wait for it to do it's magic.
And now your back on LL and you can get back to rooting this phone.
And just so people know it is not possible to downgrade from LL to KK, it will brick your phone for some reason, and trust me I had to send mine back and get a knew one, nothing would get it to work again!
So that's how you get back to LL from MM, which seems to be the only way to have root at the moment...
One more thing, I was able to transfer the files for the effortless root on MM but you can't do any send_command.exe commands because it just says FAIL. but it did switch the system software from Official to Modified so it did something just not what I wanted it to do....
Click to expand...
Click to collapse
Hey sorry but the www.lgkdz.com doesn't work. Is there another site we can find all lg firmware to downgrade for our exact lg variant match....

From OP second 1), try : http://storagecow.eu/index.php?dir=Xda/LG+G4/
or check the XDA G4 section for your variant.

Thank you for your response. I did actually download the H812 kdz from storagecow however when I put it in the LGUP tool it read as an error in the tot file. I'm not sure what happened or where I went wrong. I'm so confused at this point and without my G4 being unuseable at this time. I also wanted to ask if the kdz you directed me to are in fact the file I need to go back to LP from MM?

V35 bricked...sad

Hi all, I have tried to upgrade to Android P but fail. After that, the phone does not work anymore. Could you please tell me how can I fix it? million thanks

masterken said:
Hi all, I have tried to upgrade to Android P but fail. After that, the phone does not work anymore. Could you please tell me how can I fix it? million thanks
Click to expand...
Click to collapse
How did you get to where you are? What did you use? Need more info.

masterken said:
Hi all, I have tried to upgrade to Android P but fail. After that, the phone does not work anymore. Could you please tell me how can I fix it? million thanks
Click to expand...
Click to collapse
bricked same
stop upgrade LG V35 AT&T
lot people failed
---------- Post added at 02:16 PM ---------- Previous post was at 02:12 PM ----------
masterken said:
Hi all, I have tried to upgrade to Android P but fail. After that, the phone does not work anymore. Could you please tell me how can I fix it? million thanks
Click to expand...
Click to collapse
u can pm motogvasyag to help u fix u r V35

az090631 said:
bricked same
stop upgrade LG V35 AT&T
lot people failed
---------- Post added at 02:16 PM ---------- Previous post was at 02:12 PM ----------
u can pm motogvasyag to help u fix u r V35
Click to expand...
Click to collapse
thanks

Shawnashley said:
How did you get to where you are? What did you use? Need more info.
Click to expand...
Click to collapse
Hi, I used the LGUP to upgrade the LG V35 from Android 8 to 9 with V350ULM20d_00_NAO_US_OP_0612.kdz. The version 8 is V350AWM10n. I used the Refurbish to process it...:crying:

masterken said:
Hi, I used the LGUP to upgrade the LG V35 from Android 8 to 9 with V350ULM20d_00_NAO_US_OP_0612.kdz. The version 8 is V350AWM10n. I used the Refurbish to process it...:crying:
Click to expand...
Click to collapse
So you went from Korean version Oreo to the Unlocked Variant Pie? Probably a compatability issue. I went from Variant 10i to Variant 20d with no issues using the upgrade option in LGUP. Have you tried anything else?

Shawnashley said:
So you went from Korean version Oreo to the Unlocked Variant Pie? Probably a compatability issue. I went from Variant 10i to Variant 20d with no issues using the upgrade option in LGUP. Have you tried anything else?
Click to expand...
Click to collapse
sorry, no. My version is AT&T unlocked V350AWM10n

masterken said:
sorry, no. My version is AT&T unlocked V350AWM10n
Click to expand...
Click to collapse
Have you tried any other KDZ? Have you tried other options besides refurbish?

Shawnashley said:
Have you tried any other KDZ? Have you tried other options besides refurbish?
Click to expand...
Click to collapse
sorry, my screen sticks (please see the picture) and cannot get in any screen to refresh ROM again...thanks

Try draining the battery by connecting an usb fan via otg and putting it into the fridge. After it turned off, enter fastboot mode and flash again.

themostunique said:
Try draining the battery by connecting an usb fan via otg and putting it into the fridge. After it turned off, enter fastboot mode and flash again.
Click to expand...
Click to collapse
Another user had issues with fastboot, could get into mode but nothing worked in fastboot. I might suggest letting it die, then using buttons to download mode while connecting to a PC. But either might work. Would love to hear either way.

masterken said:
Hi all, I have tried to upgrade to Android P but fail. After that, the phone does not work anymore. Could you please tell me how can I fix it? million thanks
Click to expand...
Click to collapse
thanks @vbenkovskyy to help me to unbrick my V35

Could you or @vbenkovskyy share what worked? I'm at a similar place.
I just bought a NiB AT&T Unlocked v350awm10w. I tried to follow this guide (https://forum.xda-developers.com/lg-g7-thinq/how-to/guide-how-to-flash-stock-firmware-lock-t3820888) but the .rar for the LGUP_common.dll is corrupted. I tried another version through google but my firmware update stopped at 91% with an 0x2000 error, which from my seach was due to the wrong .dll version. That led me to https://www.reddit.com/r/LgV35/comments/blt10i/how_to_flash_kdz_firmwares/, I extracted the .dll from the unlocked Pie .kdz (V350ULM20d_00_NAO_US_OP_0612) but now when I try to launch LGUP it says the .dll for v350awm10w is not properly installed.

**TheDuke** said:
Could you or @vbenkovskyy share what worked? I'm at a similar place.
I just bought a NiB AT&T Unlocked v350awm10w. I tried to follow this guide (https://forum.xda-developers.com/lg-g7-thinq/how-to/guide-how-to-flash-stock-firmware-lock-t3820888) but the .rar for the LGUP_common.dll is corrupted. I tried another version through google but my firmware update stopped at 91% with an 0x2000 error, which from my seach was due to the wrong .dll version. That led me to https://www.reddit.com/r/LgV35/comments/blt10i/how_to_flash_kdz_firmwares/, I extracted the .dll from the unlocked Pie .kdz (V350ULM20d_00_NAO_US_OP_0612) but now when I try to launch LGUP it says the .dll for v350awm10w is not properly installed.
Click to expand...
Click to collapse
This one: url]https://www.lanzous.com/i3y5ocd[/url
Use this one and run as administrator. Don't unzip, just use LGUPD. From within zip. Let me know if it works.

Shawnashley said:
This one: url]https://www.lanzous.com/i3y5ocd[/url
Use this one and run as administrator. Don't unzip, just use LGUPD. From within zip. Let me know if it works.
Click to expand...
Click to collapse
Thanks for that link Shawn. Unfortunately after about an hour stuck at 91%, the download mode rebooted. Now it autoboots into the bootloader. I can see it through fastboot devices, but the only on-phone options are restart and power off. I tried to extract the laf.img from the Oreo Fi .kdz and fastboot boot laf.img but I got the g.co/abh warning and it rebooted into bootloader again so I'm stuck. Any help you can give would be great.

Anybody figure this out?
Also US unlocked v35 tried upgrdaing from 8.0 to 9.0 , stuck at 91% and now forever in fastboot mode
anyhelp would be appreciated
thanks
Rico