Hey everyone ,I need some help to solve my issue , I have galaxy note 3 n900t Tmobile ,few months ago I have root my phone and I have my rom manager app purchased so I used it to flash their recovery ,phone worked fine ,few days ago after rebooting it went to download mode by itself and kept restating and going to download mode over and over and did not boot.
So I tried vol up+home+pwr it instead going to recovery it happened same thing it went to download mode and reboot and over and over ,so I pulled out battery and using buttons I went to download mode and when asked to continue or cancel I picked cancel and phone restarted and without problems booted up and works ,I use stock rom 4.4.2 .
And story got worst now ,since everything seems to be fine phone works right ,its not ,It wont go to recovery mode anyway using rom manager or button way,using odin 3.7 and 3.10 no matter flashing any recovery file FAIL, flashing stock firmware FAIL at aboot ,using Kies to update firmware FAIL ,I tried all What I know and nothing helps odin shows me that writing memory fail ,I have not tied to use nand memory erase ,and reboot since I have not use that ever and im scared to do it since phone kinda work I dont want to brick it ,so if anyone know how Please advise ,Thanks
odin massage :
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900TUVUDNE6_N900TTMBDNE6_N900TUVUDNE6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> __XmitData_Read ..
<ID:0/005> XmitData Fail..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Related
im in a bit of a pickle here.
so i had android 4.3 stock rom but then switched to cyanogemod 10.2.. today i decided i wanted to go back to stock rom so i tried using odin 3.07 and flashing I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 (i cant find 4.3 firmware anywhere). i go into download mode, put that file in PDA, and odin tells me:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone is says SV REV Check Fail : Fused 2 > Binary 0
i was trying to find stuff out online and they said something about a bootloader and i have no clue what that means. also, cyanogenmod is no longer even going to the home screen so my phone is not functioning at all. and since it isnt loading, my computer isnt detecting a device so i cant add any files to my phone.
can someone please help me? using english please, not computer hacker language. im not that advanced in this kind of stuff.
camerondobbs said:
im in a bit of a pickle here.
so i had android 4.3 stock rom but then switched to cyanogemod 10.2.. today i decided i wanted to go back to stock rom so i tried using odin 3.07 and flashing I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 (i cant find 4.3 firmware anywhere). i go into download mode, put that file in PDA, and odin tells me:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone is says SV REV Check Fail : Fused 2 > Binary 0
i was trying to find stuff out online and they said something about a bootloader and i have no clue what that means. also, cyanogenmod is no longer even going to the home screen so my phone is not functioning at all. and since it isnt loading, my computer isnt detecting a device so i cant add any files to my phone.
can someone please help me? using english please, not computer hacker language. im not that advanced in this kind of stuff.
Click to expand...
Click to collapse
Unfortunately my friend, Odin will not work to return back to stock. By chance did you make a nandroid backup before you switched from 4.3 to CyanogenMod? If not I'd suggest finding a TW based rom from one of the devs on here under the Android Development thread and flash it manually via CWM or TWRP. I'm looking myself for a 4.3 TW Odin tar but nothing has surfaced to my knowledge. You're trying to flash a 4.0 rom in Odin it looks like which won't work since 4.3 updates the baseband and bootloader which will cause Odin to fail every time you try flashing a rom that isn't 4.3
camerondobbs said:
im in a bit of a pickle here.
so i had android 4.3 stock rom but then switched to cyanogemod 10.2.. today i decided i wanted to go back to stock rom so i tried using odin 3.07 and flashing I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 (i cant find 4.3 firmware anywhere). i go into download mode, put that file in PDA, and odin tells me:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone is says SV REV Check Fail : Fused 2 > Binary 0
i was trying to find stuff out online and they said something about a bootloader and i have no clue what that means. also, cyanogenmod is no longer even going to the home screen so my phone is not functioning at all. and since it isnt loading, my computer isnt detecting a device so i cant add any files to my phone.
can someone please help me? using english please, not computer hacker language. im not that advanced in this kind of stuff.
Click to expand...
Click to collapse
if you still can go into downloadmode, you can unroot your device and put it back to stock with Kies 3.
Download Kies 3 from samsung web site and download Samsung USB Drivers too
Unplug your phone from the PC
After on Kies 3 click on tools>emergency firmware update and inisialitazion.
Now they will ask for your phone model so if you are on at&t its : SGH-I747 (Rogers bell .. tis : SGH-I747M
After, Kies 3 will ask you your S/N (this can be found under your battery the sticker) so remove your battery and write it down
Know if it work they gonna tell you to put your phone into download mode
To go into download mode hold : Volume Down + Home Button + Power button
After on your phone you should see a Yellow triangle with some warning (jUst ignore that and press the volume up button)
And Kies 3 will automaticly unroot your phone, flash the new 4.3 update and flash the new bootloader too.
!!!***WATCH OUT! DO A BACK UP OF YOUR INTERNAL MEMORY BECAUSE YOU ARE GOING TO LOSE EVERYTHING***!!!
And after you just have to wait.... Kies 3 will download automaticly 4.3 Firmware and flash it on your phone.
Make shure that your battery is charged at least at 30% before doing that.
And after enjoy your phone unrooted and on stock rom and after you will be still able to update your phone for futurer update availble.
Tell me if it worked for you after!
Hi all, so I installed the cyanogenmod's new update, I used its in the system update, thought it will be pretty safe just like a stock android update, but then my phone stuck at boot screen. and I really don't have time to mingle with the system right now. I need the phone like 3 hours ago!! i downloaded the stock rom and try to use odin to flash it. then it gives me this error message.
I tried, change the cable, change usb port, change odin version, but nothing works so far. (((
Please help !!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
You have the 4.3 bootloader on your phone? If you do, you can't use Odin to flash a stock ROM because it may brick your phone. You can only use Odin to flash a 4.3 stock ROM that had specifically been compiled for use with Odin.
audit13 said:
You have the 4.3 bootloader on your phone? If you do, you can't use Odin to flash a stock ROM because it may brick your phone. You can only use Odin to flash a 4.3 stock ROM that had specifically been compiled for use with Odin.
Click to expand...
Click to collapse
Is there a 4.3 rom we can flash with odin? I attempted (stupidly) to flash stock after a CM11 nightly caused a bootloop and would not allow me to enter recovery. All I can do for the moment is enter download mode. Every rom I try to flash I get the same error along with the error on my phone reading:
SW REV CHECK FAIL : Fused 2 > Binary 0
Is there anything I can do?
EDIT: Finally found a fix. I flashed a rom from this thread.
http://forum.xda-developers.com/showthread.php?t=1980683
Just go to their website and download the file for your specific model. After flashing my phone booted up in CM11 (what I previously had installed) but it crashed upon loading the lockscreen. Luckily I could enter recovery mode and do a factory reset. This fixed everything!
stuck at boot logo
enter into recovery but internal memory not mounting shows only 0mb storage not evn wipe,restore,backup anything wd dt not possible
odin show me dis when m try to install new md5 file.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
plzzzzzzzzz help pllzzzz
thankz in advance
What recovery are you using? Try updating it. Factory resetting almost always solves boot hangups. For Odin, try flashing a different firmware. If you ever flashed 4.3 firmware, you can ONLY flash the same or newer from now on.
DocHoliday77 said:
What recovery are you using? Try updating it. Factory resetting almost always solves boot hangups. For Odin, try flashing a different firmware. If you ever flashed 4.3 firmware, you can ONLY flash the same or newer from now on.
Click to expand...
Click to collapse
SIr i have the same Problem but a little bit different .
i can recover my Phone without Odin problem but when the phone start up the is hangup with SAMSUNG logo and nothing appear then suddenly the phone is restarting without any action .. !!!!
please what should i do to fix my phone !?
Wallid92 said:
SIr i have the same Problem but a little bit different .
i can recover my Phone without Odin problem but when the phone start up the is hangup with SAMSUNG logo and nothing appear then suddenly the phone is restarting without any action .. !!!!
please what should i do to fix my phone !?
Click to expand...
Click to collapse
What steps have you taken to try to fix it?
Hey,
I have some old samsung ace 2 that I was experimenting around with, wanted to try and get some 5.1.1 ROM on it. But first I figured I needed to get some kernel on it, though I did something which now means that during bootup it is stuck on the samsung galaxy ace 2 logo. I can access ODIN mode, though cant access recovery mode. The battery mode also seems to be broke too as it just displays a loading symbol. So far I have flashed the EK kernel on it with what seems to be a success according to ODIN mode. Also note that Samsung KIES tries to connect to my device in ODIN mode but it never connects and troubleshooting doesnt do anything.
I tried to flash stock firmware to it through the odin software whilst my phone was in odin mode, though it displays a bunch of stuff in the odin pc software then attempts to reboot my phone though it just gets stuck on the boot logo again without odin really doing much here are the logs:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8160XXLD8_ready_to_root_ANT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> kernel.bin.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Reckon my device is still salvagable from this hole I have dug myself in?
i am also having the same problem. tried to flash stock firmware with and without pit, still can't work :crying:
and i don't have jtag and don't know how to use it even if i have jtag :crying:
Need help recovering SM-T310 8", stuck at boot screen, Odin won't load TWRP onto it
I've been trying to get this tab back in working order for several hours now - When I first started working on it, all it showed was the "Samsung Galaxy Tab 3" screen, going right back to that when I turn it off (not even staying off.) I tried putting it in download mode (Power+Down+Home, it does work) and loading TWRP 3.1.1 with Odin (tried both 3.07 and 3.12.3) and it fails almost immediately after hitting Start, Kies won't recognize it over USB, and when I put in the model and S/N it says it's "not eligible".
Also, I've tried using the stock recovery mode, but the factory reset doesn't help, and it doesn't recognize the format of the only rom I could find for it (that doesn't require a premium membership.) It's a .tar.md5, TWRP is supposed to be able to handle it, but the system recovery doesn't see it at all.
(click for big)
Here's the Odin log:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T310.TWRP.3.1.1-0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Help, please? I've gone through multiple past threads here and on other sites I found on Google to get this far, but I've been unable to make any appreciable progress.