HELP! I upgraded my Ascend P6 to B510 (after going from B125 to B132 the day before). At first it seemed like it was working, but then I got the message "System UI has stopped" over and over again. I tried to reboot the phone, but it stayed stuck on the "Huawei Ascend" logo. Now, I try to turn it off, but it just restarts and then goes to the same screen. After a long time it will eventually play the startup animation and then go to the Huawei Logo, but it stays stuck there. I'm new to Android so I might just be making stupid mistakes, but I can't seem to access bootloader or fast recovery mode. Any ideas? Thanks in advance!
While restarting the phone, press and hold all three buttons (power button , volume up , volume down) and it will bring you to the recovery mode where you can whipe dalvick/cache and make a reset to the phone. If that doesnt help with booting to the system then download some stock firmware and put it on your sd card and boot to recovery again. That way you gonna start the update process and reflash the system. If that doesnt work too write here and we'll see what to do next.
Sent from my P6-U06 using xda app-developers app
Related
guys,
trying to install a new rom but once i enter "reboot inot recovery mode" via rom manager the phone restarts and is stuck on the HTC screen (just plain green HTC, nothing else)
i even tried installing an over the air update and thats gets stuck at this screen when it reboots.
the phone is fully rooted, only way to get off the screen is doing a battery pull
help!!
jhonnieblue said:
guys,
trying to install a new rom but once i enter "reboot inot recovery mode" via rom manager the phone restarts and is stuck on the HTC screen (just plain green HTC, nothing else)
i even tried installing an over the air update and thats gets stuck at this screen when it reboots.
the phone is fully rooted, only way to get off the screen is doing a battery pull
help!!
Click to expand...
Click to collapse
today is the day of the stucks... read this thread maybe its useful to you
http://forum.xda-developers.com/showthread.php?t=1089682
u can´t enter into recovery?
but if you pres vol-& power button at the same time for a long... u can enter into bootloader yees??
yup i get into bootloader with the volume and pwer knob but from rom manager it sticks on the white screen with HTC logo
I installed the latest Cyanogenmod 10.2 Nighty yesterday and it worked just fine. I rebooted it and got a cyanogenmod logo bootloop. I entered fastboot, then recovery and installed another version of cgm which was already in the sd card after wiping the data.
Now I can't even access fastboot. When I hold the power button with volume up or down it does nothing, sometimes it shortly shows the LG logo and then it turns into a black screen.
The only thing I can do is to access Download Mode by holding power+volume up+volume down.
Thank you for your time
Click my signature and look there for answers. Use kdz updater to revert to stock and that's it. Don't ask how you do that,i will ignore any further questions. You have all the answers there.
HELP PLEASE!
OKAY HERE MY PROBLEM: Im too lazy to flash a TWRP via ADB Shell my phone huawei P6. and i search for easy way to install it . and i try Apps call flashify and flash the trwp direct on it. after flashing apps request me to reboot after i reboot my phone huawei P6. its stuck on Logo. and when i try to Off my phone. its automatically getting on and i try to hold Volume + and down plus power up to go to recovery mode and nothing happen. my phone stay stuck on logo untill he gets 0% of battery because when i try to off my phone. its automatically getting on. PLEASE! HELP ME! I MISS MY PHONE I SWEAR
BTW I HAVE AN "recovery-twrp.img" on my internal memory. can i flash it? even my phone stuck on logo? using abd&fastboot.zip with commcand promp? sorry im not too professional on android PLEASE HELP!
You really need to get your phone boot to fastboot-mode and flash the correct recovery that way now, you can find on this forum how to boot to fastboot, if I am right it is Volume Down + Power On. You will see the Huawei logo (it will look like your phone is stuck).
You can check with fastboot devices if it really is in fastboot-mode.
_Arjen_ said:
You really need to get your phone boot to fastboot-mode and flash the correct recovery that way now, you can find on this forum how to boot to fastboot, if I am right it is Volume Down + Power On. You will see the Huawei logo (it will look like your phone is stuck).
You can check with fastboot devices if it really is in fastboot-mode.
Click to expand...
Click to collapse
Sir can you post the link to how to fast boot my phone even its stuck? i really need to fix my phone.
Please help me. How to fix my phone stock on logo
Try to: Hold Power + vol up for then secs until it reboots. Then only hold vol up. Now it should be stuck in ascend logo. Now flash twrp with fastboot.
Sent from my P6-U06 using XDA Free mobile app
_heisenberg said:
Try to: Hold Power + vol up for then secs until it reboots. Then only hold vol up. Now it should be stuck in ascend logo. Now flash twrp with fastboot.
Sent from my P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
Sir. its not working i hold vol up. and my phone cant detect my computer. when i type "adb devices" there anothing appear that my phone is detected. PLEASE HELP! How can detect my phone? so i can flash new Twrp
Correction , i hold power button then vol up. when huawei logo appear i only hold vol up. then it still not detected on my computer. sorry for my bad english.
Help999 said:
Correction , i hold power button then vol up. when huawei logo appear i only hold vol up. then it still not detected on my computer. sorry for my bad english.
Click to expand...
Click to collapse
When your phone gets stuck on huawei logo it means you are in bootloader mode which means adb commands dont work anymore thats why the computer isnt recognizing it, so you need to install fastboot drivers and use fastboot commands to flash anything.
Sent from my P6-U06 using xda app-developers app
Once I had the same problem with P6 and someone told me to plug in charger and it will charge but very slow. And then i put b132 firmware on sd card, hold 3 button combination and phone did the rest
tileeq said:
When your phone gets stuck on huawei logo it means you are in bootloader mode which means adb commands dont work anymore thats why the computer isnt recognizing it, so you need to install fastboot drivers and use fastboot commands to flash anything.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Can you give me the link to install the fastboot drivers please? :3
and the next step after i've done downloading the fastboot drivers .
advance thanks sir. i appreciate your help. :good:
stuck on huawei logo
Ive experience also stuck on huawei ascend logo when flashing custom rom without twrp recovery. I just flash B118 chinese via stock recovery and all is ok now.
122
trimactam said:
Ive experience also stuck on huawei ascend logo when flashing custom rom without twrp recovery. I just flash B118 chinese via stock recovery and all is ok now.
Click to expand...
Click to collapse
how did you flash the rom? my phone didnt detect my computer and my phone cant go on recovery mode. so how did you flash the rom?
*help needed* huawei p6 stuck in bootloop *help needed*
Hi everybody,
I need some help on my huawei p6 that is stuck in a bootloop. Ofcourse there is a solution with recovery mode, but i can't get into the recovery mode. Can someone please help me with this problem???
Thanks in advance.
Jeri vd Mooren.
Get a update.app and put it in the dload directory. It will install a working from. (Update.app is a rom) then press the vol up and down plus the power on button.
Can you enter bootloader mode atleast?
Sent from my SM-G850F
Update.app will update the whole with everything and that is all you need to have a working phone (I use the b708) .
Put the update.app in a directory called dload in yr sd card (if you do nto have, create one.
Press the Volume + and Vol - and then Press the power button. It will get you install the update.app.
The rest is immaterial and I cant help you.
He said he cant get into recovery, so update.app wont help him at this moment unless he can make it work.
Sent from my SM-G850F
[B708 version]
This is very strange. I just had the same problem today. Appeared out of nowhere and for no reason. Very odd bug.
If TWRP is installed, you can still access the bootrecovery. Well again with the power button and volume + -.
Wipe cache and cache davil.
This solves the problem.
BUT ... I noticed that the connection 3G / 4G stops working then. SOLUCE ---> android phone switched on the desktop, remove the SIM card "hot plug" and return. The phone will ask to restart. Restart!
Plug in the USB phone to conserve the battery (caution).
Otherwise install TWRP in adb mode if debug mode was previously activated and make the approach.
Jerivdmooren said:
Hi everybody,
I need some help on my huawei p6 that is stuck in a bootloop. Ofcourse there is a solution with recovery mode, but i can't get into the recovery mode. Can someone please help me with this problem???
Thanks in advance.
Jeri vd Mooren.
Click to expand...
Click to collapse
hello we are equal . My ascend p6 not work out that way
could you fix it?
This is very weird indeed, I have the same problem and of course I have it on B708, this one to be exact.
It worked fine for a few months, when it just started to reboot.
I didn't pay much attention to it at that moment, but after a week or so I got bootloops, (4-5 restarts at the logo) and then it would start.
And one day it failed to start, i would get only bootloops.
I tried getting in recovery and do a wipe / format, it barely worked.
The system went ON for a few minutes then totally crashed.
I couldn't get it started, I couldn't get in bootloader / fasboot (or whatever it's called) and not even recovery.
Every time I try to get in any of them the phone just bootloops.
I have no idea what to do since I can't flash a Rom 'cuz I can't get in the damned bootloader or recovery.
Can anyone help us?
My dear P2a42 keeps stock on the first boot-logo :crying:
I've already tries to recover boot and system with TWRP 3.0.3 and TWRP 3.0.3-3. Also tried to wipe the whole phone and reinstall the ROM (the modded newest stock ROM), this also didn't work.
Strange problem IMHO... What's the best way to completely reset the phone to stock, flashing it with fastboot?? Or is there a possible other solution?
Thanks in advance :good:
Have a nice day y'all.
ilmervanhattem said:
My dear P2a42 keeps stock on the first boot-logo :crying:
I've already tries to recover boot and system with TWRP 3.0.3 and TWRP 3.0.3-3. Also tried to wipe the whole phone and reinstall the ROM (the modded newest stock ROM), this also didn't work.
Strange problem IMHO... What's the best way to completely reset the phone to stock, flashing it with fastboot?? Or is there a possible other solution?
Thanks in advance :good:
Have a nice day y'all.
Click to expand...
Click to collapse
try this not sure if it will work for you
https://www.youtube.com/watch?v=ixnZMM5FRIs
abhayruparel said:
try this not sure if it will work for you
https://www.youtube.com/watch?v=ixnZMM5FRIs
Click to expand...
Click to collapse
Thank you, but I don't want to downgrade. Why should I.
Either way I'm not able to watch youtube here.
ilmervanhattem said:
Thank you, but I don't want to downgrade. Why should I.
Either way I'm not able to watch youtube here.
Click to expand...
Click to collapse
Actually in video it's fastboot method only i didn't read the article of yours properly.
Sent from my Lenovo P2 using Tapatalk
Lenovo p2a42 stuck on logo
Lenovo P2 is stuck in a boot loop.
I can't enter the recovery menu. If I press Volume up and power, it tries to start normally. If I press Volume Down and Up and Power, Phone enters "Bootmode is 'recovery'". After 14 seconds, it tries to restart in the normal startup.
If I press power + Volume Down, it enters a menu to swich between "Start", "Barcodes" and "Power Off". it shows dthe device parameters like serial number, storage, ram and the date of the installed software.
What can I do?
The only fix to get back into TWRP,
when the phone reboots, in the short moment of a blank screen you need to press Volume Up + Power.
The only catch is you have to press the Volume Up for a very short time.
It took me many attemps untill i got back into TWRP !!
Do not wipe anything or the phone boots again and you might get stuck in the same shizzle.
So install your favorite Rom & GApps and hopelly all works fine again.