Develop Bugs

Firmware Help

So I just got S-Off with SunShine and now I want to get rid of the red banners at the start up. I looked for my Version-Main but it was blank. I have SuperCid so does that mean I can flash any firmware? Will anything get messed up? I'm sorry, I'm new to the HTC One M8 and I don't understand everything just yet. Thank you for the help.

EarthboundHero said:
So I just got S-Off with SunShine and now I want to get rid of the red banners at the start up. I looked for my Version-Main but it was blank. I have SuperCid so does that mean I can flash any firmware? Will anything get messed up? I'm sorry, I'm new to the HTC One M8 and I don't understand everything just yet. Thank you for the help.
Click to expand...
Click to collapse
@santod040 made a thread for this over here. It has all variants HBOOTS so it should work. & to answer your question yes you can. SuperCID allows you to flash other carriers ROM's, all though it's best you flash only the ones for your variant as other carriers may use other cellular bands and leave your phone unable to make calls or use mobile data if you use their ROM's.

S1L3nTShaDoWz said:
@santod040 made a thread for this over here.It has all variants HBOOTS so it should work. & to answer your question yes you can. SuperCID allows you to flash other carriers ROM's, all though it's best you flash only the ones for your variant as other carriers may use other cellular bands and leave your phone unable to make calls or use mobile data if you use their ROM's.
Click to expand...
Click to collapse
Thanks, that's the thread I was using, I just wanted to double check that I wouldn't brick my phone if I flashed the wrong HBoot or something. Thanks for the help, mate.

EarthboundHero said:
Thanks, that's the thread I was using, I just wanted to double check that I wouldn't brick my phone if I flashed the wrong HBoot or something. Thanks for the help, mate.
Click to expand...
Click to collapse
Welcome! Feel free to ask more questions if you feel unsure of something. Best ask the simple questions rather than brick your phone and have an even tougher question to ask.
On the possible brick of the phone, yes it's very possible if you flash the wrong HBOOT. So be 100% sure you DO flash the correct one.

empty version number is something I had too, I was using TWRP and issue disappeared when I switched to Philz recovery (you may need to reflash the firmware afterwards though).
I agree, be sure to flash the right HBOOT version or you might have issues. SuperCID allows you to flash any RUU or firmware version, but it doesnt prevent getting into trouble unfortunately

nuts77 said:
empty version number is something I had too, I was using TWRP and issue disappeared when I switched to Philz recovery (you may need to reflash the firmware afterwards though).
Click to expand...
Click to collapse
Yes empty version number is a common issue with the TWRP 2.7.1.0.
I got this fixed by reflashing firmware and afterwards reflashing TWRP. After this everything was fine again, as version number showed up again in bootloader.

[q] m8 european developer edition, stock, unlocked and tampered with s-on

Plz help. I have htc one m8 developer edition its s_on, unlocked, tampered. I want to know will i ever receive ota updates? Because I'm still on 4.4.2.

w69 said:
Plz help. I have htc one m8 developer edition its s_on, unlocked, tampered. I want to know will i ever receive ota updates? Because I'm still on 4.4.2.
Click to expand...
Click to collapse
If it is a true developer edition, you might try backing up, running one of the Developer Edition RUU's to get back to 100% stock, and then see if you can get the OTA update. If this was a conversion, make sure the CID/MID are correct (which requires S-off).

w69 said:
Plz help. I have htc one m8 developer edition its s_on, unlocked, tampered. I want to know will i ever receive ota updates? Because I'm still on 4.4.2.
Click to expand...
Click to collapse
If its truly the Dev Edition, on the stock ROM and stock recovery, you should get OTA.

insert coin
redpoint73 said:
If its truly the Dev Edition, on the stock ROM and stock recovery, you should get OTA.
Click to expand...
Click to collapse
bro i doubt its stock because it is also showin insert coin. are insert coin roms stock or custom??

w69 said:
Plz help. I have htc one m8 developer edition its s_on, unlocked, tampered. I want to know will i ever receive ota updates? Because I'm still on 4.4.2.
Click to expand...
Click to collapse
lock the bootloader and flash then newest RUU
http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
Then simply unlock the bootloader
flash TWRP recovery and SuperSU and a kernel if you need system r/w

w69 said:
bro i doubt its stock because it is also showin insert coin. are insert coin roms stock or custom??
Click to expand...
Click to collapse
Then why did you state in the thread title and OP "stock"?
InsertCoin is a custom ROM and not stock. So you need to return to a stock ROM to install OTA.
---------- Post added at 10:08 AM ---------- Previous post was at 10:07 AM ----------
clsA said:
lock the bootloader and flash then newest RUU
http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
Click to expand...
Click to collapse
1540 is US Dev Edition, and the OP has Euro DE. The RUU likely will not run with incorrect CID, MID. And not sure this is the stock baseline he would want to be on.

Htc one m8 CID: 002, european, stock demo rom (receiving ota)
redpoint73 said:
Then why did you state in the thread title and OP "stock"?
InsertCoin is a custom ROM and not stock. So you need to return to a stock ROM to install OTA.
---------- Post added at 10:08 AM ---------- Previous post was at 10:07 AM ----------
1540 is US Dev Edition, and the OP has Euro DE. The RUU likely will not run with incorrect CID, MID. And not sure this is the stock baseline he would want to be on.
Click to expand...
Click to collapse
ok i changed the custom insert coin rom to this demo rom unfortunately. yet my device is S-on, unlocked boot loader, its cid is 002, european model. the problem is i cant flash any other rom on this demo version rom. i only need a 100% stock rom (sense) to receive ota updates in future. plz reply asap cant use my phone the demo app comes again and again.

w69 said:
ok i changed the custom insert coin rom to this demo rom unfortunately. yet my device is S-on, unlocked boot loader, its cid is 002, european model. the problem is i cant flash any other rom on this demo version rom. i only need a 100% stock rom (sense) to receive ota updates in future. plz reply asap cant use my phone the demo app comes again and again.
Click to expand...
Click to collapse
Whats a Demo Rom ?
do you have TWRP installed ?
Install this >> http://www.androidrevolution.org/downloader/download.php?file=One_M8_2.22.401.4_odexed.zip
That will get the phone working and Sunshine should get you s-off

clsA said:
Whats a Demo Rom ?
do you have TWRP installed ?
Install this >> http://www.androidrevolution.org/downloader/download.php?file=One_M8_2.22.401.4_odexed.zip
That will get the phone working and Sunshine should get you s-off
Click to expand...
Click to collapse
yes i have twrp-2.8.1.0 installed. demo roms are those roms like in shops they have demo phones with playing demo videos again again in it. this rom is only supporting 2G. i used this link http://forum.xda-developers.com/showthread.php?t=2735235 and copied the odexted zip to twrp. it runs successfully but after that phone is in same old condition. is it true that the odexted rom is not installing because im S_ON??
and tell me if i S_OFF will i get ota updates with the odexted rom? sunshine needs 25$. well havnt tried firewater on this demo rom. and bro the link u sent is not working.

w69 said:
is it true that the odexted rom is not installing because im S_ON??
Click to expand...
Click to collapse
Don't know where you obtained that info, but its false. S-off is not needed to install any ROMs.
If the phone is a demo unit, you should have stated that right away in your top post. On a previous HTC device (One X) I believe the demo unit was very difficult, if not impossible to make fully functioning. But no idea if the same is true for the M8 demo unit you have.

redpoint73 said:
Don't know where you obtained that info, but its false. S-off is not needed to install any ROMs.
If the phone is a demo unit, you should have stated that right away in your top post. On a previous HTC device (One X) I believe the demo unit was very difficult, if not impossible to make fully functioning. But no idea if the same is true for the M8 demo unit you have.
Click to expand...
Click to collapse
i have no ideo what was it. i got it from ebay. it had a custom rom 4.4.2 insert coin.i was not receiving fota thats y i thought to shift to full stock. on a facebook page of htc one M8 someone sent me a link to flash it and said its full stock rom. i flashed it with twrp but i came out demo. now im stuck. someone told if me i flash a custom rom again it will be fixed even if its S-ON. kindly tell me a good updated custom rom which doesnot require S-OFF.

w69 said:
on a facebook page of htc one M8 someone sent me a link to flash it and said its full stock rom.
Click to expand...
Click to collapse
Sounds like you just got some random advice, with an unknown link and flashed it. Why on earth would you do such a thing? Stick to XDA, at least here you can go by reputation (number of thanks, Recongnized Contibutor, or Recognized Dev titles).
w69 said:
someone told if me i flash a custom rom again it will be fixed even if its S-ON. kindly tell me a good updated custom rom which doesnot require S-OFF.
Click to expand...
Click to collapse
As I just said in my last response, you do not need S-off to flash any ROMs. If you want help, you need to start actually paying attention to the help that is being given to you. You are also making it very hard to help you, by not giving enough info, and just leaking it out little by little.
You say you can't flash any other ROMs, but that isn't enough information. What happens when you try to flash? Does it fail with an error message? Or flash successful, but doesn't boot? What other ROMs have you tried?
If you want to return to stock to receive OTAs, you will need to find and flash the appropriate nandroid and stock recovery for our CID. Stock backup collection can be found sticky at the top of the General section. There are also various guides on how to return to stock, if you need them just search.

redpoint73 said:
Sounds like you just got some random advice, with an unknown link and flashed it. Why on earth would you do such a thing? Stick to XDA, at least here you can go by reputation (number of thanks, Recongnized Contibutor, or Recognized Dev titles).
As I just said in my last response, you do not need S-off to flash any ROMs. If you want help, you need to start actually paying attention to the help that is being given to you. You are also making it very hard to help you, by not giving enough info, and just leaking it out little by little.
You say you can't flash any other ROMs, but that isn't enough information. What happens when you try to flash? Does it fail with an error message? Or flash successful, but doesn't boot? What other ROMs have you tried?
If you want to return to stock to receive OTAs, you will need to find and flash the appropriate nandroid and stock recovery for our CID. Stock backup collection can be found sticky at the top of the General section. There are also various guides on how to return to stock, if you need them just search.
Click to expand...
Click to collapse
Thanx a lot for your help and concern. now i have installed android revolution rom. i think its good. will see for L rom in future. but the problem was that i found exact rom and rocovery for my device which is 401 wwe european having cid 002 latest HBoot . flashed it and flashing was successful but when i reboot the device its still the same. means the flash didnt work. yes u are right i was leaking out info a little. it was because i knew my device a little and i didnt know what is the current status of my device. now after reasearch of few days my mind is clear. thanx for your help and interest again. this page is a blessing for beginners like me.

w69 said:
Thanx a lot for your help and concern. now i have installed android revolution rom. i think its good. will see for L rom in future. but the problem was that i found exact rom and rocovery for my device which is 401 wwe european having cid 002 latest HBoot . flashed it and flashing was successful but when i reboot the device its still the same. means the flash didnt work. yes u are right i was leaking out info a little. it was because i knew my device a little and i didnt know what is the current status of my device. now after reasearch of few days my mind is clear. thanx for your help and interest again. this page is a blessing for beginners like me.
Click to expand...
Click to collapse
I glad you got it working .. sorry about the dead link, i wish Mike would leave the old version on his site longer

Returning to stock issues.

I'm currently running Android Revolution HD on my new M9, unlocked, s-off also.
Found out that I have the battery is faulty, so I need to return it to stock, and get it back the shop for a replacement.
However, I stupidly didn't make a back up of my stock rom.
The CID of my phone is O2___01
I've downloaded the stock rom from this site, and flashed it using the RUU command. However when it flashes, then tells me to reboot, it still has Android Revolution HD on it.
I've spent a few hours browsing the forum, and still I've come to no avail.
Any help would be well appreciated!

Webbage said:
I'm currently running Android Revolution HD on my new M9, unlocked, s-off also.
Found out that I have the battery is faulty, so I need to return it to stock, and get it back the shop for a replacement.
However, I stupidly didn't make a back up of my stock rom.
The CID of my phone is O2___01
I've downloaded the stock rom from this site, and flashed it using the RUU command. However when it flashes, then tells me to reboot, it still has Android Revolution HD on it.
I've spent a few hours browsing the forum, and still I've come to no avail.
Any help would be well appreciated!
Click to expand...
Click to collapse
You don't provide much information so it's hard to help. So let's start at the bginning: What firmare version are you using? (It's stated in Download Mode in the line with "OS" at the beginning.)
You tried to flash a RUU? Which one? Have there been any error outputs? If yes, which ones? Since you're S-OFF flashing a RUU should not be a problem at all so these outputs are very important if you want any help.

I tried to flash 1.40.206.8 -> 2.10.206.2 from this page
Code:
http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Also I followed this,
Code:
http://forum.xda-developers.com/one-m9/development/firmware-t3068243
downloaded the correct RUU zip, tried to flash, got the error code telling me I need to immediately flash again which I did. Rebooted, and it just set up Android Revolution HD again.-
My firmware currently is 2.10.206.2
Im sure it's something stupid I missing out?

Webbage said:
I tried to flash 1.40.206.8 -> 2.10.206.2 from this page
Code:
http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698
Also I followed this,
Code:
http://forum.xda-developers.com/one-m9/development/firmware-t3068243
downloaded the correct RUU zip, tried to flash, got the error code telling me I need to immediately flash again which I did. Rebooted, and it just set up Android Revolution HD again.-
My firmware currently is 2.10.206.2
Im sure it's something stupid I missing out?
Click to expand...
Click to collapse
As far as I know Sneakyghost doesn't provide any RUUs. Those are only firmware packages that do not contain a rom. So it's no miracle that you're still booting ARHD.
You can download O2 RUUs from here, here or here. Any of the X.XX.206.X files will work since you are S-OFF. Do you have a SD card that is not bigger than 32gb? If yes, format it to fat32, copy one O2 RUU to its root directory and rename that file to "0PJAIMG.zip". If you then boot to Download Mode you will be asked to push the Volume Up button and the RUU will start flashing. If it reboots to system instead of rebooting to Download Mode you will have to power off your phone and boot to Download Mode manually. The RUU will continue then. At the end you will be asked to push the power button so that your phone gets shut down. If you now start your phone you will be back on a stock system.
Be aware that there is no RUU for your current firmware. Since you're S-OFF that doesn't matter but your phone will be downgraded at the end.

Ahh no wonder! haha
Going to try this shortly, so will let you know how I get on!
After its flashed, I'll be good to lock again and go s-on? Then return to the shop?

Webbage said:
Ahh no wonder! haha
Going to try this shortly, so will let you know how I get on!
After its flashed, I'll be good to lock again and go s-on? Then return to the shop?
Click to expand...
Click to collapse
Relock only after you successfully tested that your device is booting normaly. After that you theoretically could re-S-ON. (But I would never do that because there is always a risk of hardbricking your phone if you re-S-ON and there is anything still modified that you didn't notice. For safety reasons S-OFF should always be considered as a oneway.)
Edit: I'm not completely sure but I actually doubt that they will check whether your phone was S-OFFed or not. If I think about the people who are working at the O2 or vodafone shops in my city I would say they do not even know what a bootloader is...

Agreed, use the s-off command to change back to "LOCKED" and leave it s-off. Too much of a risk otherwise.
If in the unlikely event they see it, you can play dumb, because a few rare people have gotten s-off phones from the factory and it doesn't prove you did anything.

Flippy498 said:
Relock only after you successfully tested that your device is booting normaly. After that you theoretically could re-S-ON. (But I would never do that because there is always a risk of hardbricking your phone if you re-S-ON and there is anything still modified that you didn't notice. For safety reasons S-OFF should always be considered as a oneway.)
Edit: I'm not completely sure but I actually doubt that they will check whether your phone was S-OFFed or not. If I think about the people who are working at the O2 or vodafone shops in my city I would say they do not even know what a bootloader is...
Click to expand...
Click to collapse
All sorted mate! Thanks a lot for your help!
What recovery am I best restoring on it?

Webbage said:
All sorted mate! Thanks a lot for your help!
What recovery am I best restoring on it?
Click to expand...
Click to collapse
Didn't the RUU flash the corresponding stock recovery?

Flippy498 said:
Didn't the RUU flash the corresponding stock recovery?
Click to expand...
Click to collapse
My bad, I didn't check.
All sorted now, thanks again bud!

Just got an M9 today and need some tips...

Hello everyone, I I just got an M9 at my local Telus store and I would like to be able to do everything with it like I am able to do with my M7, so I know I will need to use sunshine to get S-OFF and I would also like to be able to change everything from the rom to the kernel to the OS, everything, so I was just wondering if someone could let me know the best order to go about doing things, meaning should I do sunshine first then worry about flashing a recovery and all that, or should I do the recovery first so that I can backup the phones current state? The phone currently says this in the hboot screen:
*** LOCKED ***
LK-1.0.0.0000
OS-1.32.661.6
and this is what it says on the phones Setting-About-Software screen:
Android version
5.0.2
HTC Sense version
7.0
Like I mentioned before, it would probably be best if I can make a backup of the phones current state just in case there are any issues, so to do that I know I need a recovery, but do I need to do the HTC Dev unlocker before I can do so? or do I have to flash a recovery first before everything else?
Now, before anyone gets upset with me for asking these questions because they have most likely been asked 1000 times before, I am not asking to be spoon feed all the details step by step, I am just asking to be pointed in the right direction and asking for you guy's opinions on the best way to go about doing things so that I do them right the first time... So if anyone could please take a minute to help me out and get me pointed in the right direction then it would be greatly appreciated... thank you very much...

apaquette420 said:
So if anyone could please take a minute to help me out and get me pointed in the right direction then it would be greatly appreciated... thank you very much...
Click to expand...
Click to collapse
First thing you should do is unlock your bootloader. After that you can install twrp and flash supersu (most can be found here) Once you are rooted run sunshine. After that the sky is the limit. You will be free to flash anything and everything. I know because I've done it. If you want to convert to a developers edition there is a post here. Personally I do not use my stock recovery or system image backups to download ota's. I prefer to run an RUU and do fresh installs. Reason why is because I am constantly changing firmware and roms. A lot of roms are based on the WWE firmware.
let me know if you have any more questions

bigp951 said:
First thing you should do is unlock your bootloader. After that you can install twrp and flash supersu (most can be found here) Once you are rooted run sunshine. After that the sky is the limit. You will be free to flash anything and everything. I know because I've done it. If you want to convert to a developers edition there is a post here. Personally I do not use my stock recovery or system image backups to download ota's. I prefer to run an RUU and do fresh installs. Reason why is because I am constantly changing firmware and roms. A lot of roms are based on the WWE firmware.
let me know if you have any more questions
Click to expand...
Click to collapse
Thank you very much for the tips.. Do I use the HTC Dev website to unlock the bootloader? I seen a link in the dev thread that said Unlock bootloader without HTCDev(root required), but I bet that the HTCDev way is probably the best best. which did you use? I'm not at home right now so I will begin when I get home later on tonight and if I need anything else I will post back, plus I post back to say how everything goes.. Thanks again for help, it is very much appreciated...

apaquette420 said:
Thank you very much for the tips.. Do I use the HTC Dev website to unlock the bootloader? I seen a link in the dev thread that said Unlock bootloader without HTCDev(root required), but I bet that the HTCDev way is probably the best best. which did you use? I'm not at home right now so I will begin when I get home later on tonight and if I need anything else I will post back, plus I post back to say how everything goes.. Thanks again for help, it is very much appreciated...
Click to expand...
Click to collapse
I've used htcdev for all 2 out o 3 of my m9's. third one is a developer edition so it wasn't needed.
just note download mode is fastboot mode on the m9. htcdev says to boot to fastboot mode and if you do not know than you can waste hours trying to figure it out.

bigp951 said:
I've used htcdev for all 2 out o 3 of my m9's. third one is a developer edition so it wasn't needed.
just note download mode is fastboot mode on the m9. htcdev says to boot to fastboot mode and if you do not know than you can waste hours trying to figure it out.
Click to expand...
Click to collapse
lol I so would have gotten caught up on that lol thanks again man!!! will post back later on...

cool..let me know if you get stuck anywhere

Ok so I got the bootloader unlocked and TWRP installed, right now I am taking a backup of the phones current state just in case. Now I just need to flash the SuperSU beta from the link you provided and then run sunshine, after that I would like to flash the latest OS for my phone, but I am not sure which version to use, I think this one is correct http://forum.xda-developers.com/one-m9/development/firmware-red-t3097678 but I am not 100% sure, do you know if this is the correct latest version for my phone?
Also should I supercid my phone before updating the firmware by entering "fastboot oem writecid 11111111" while in download mode? because my cid is TELUS001 and I do not see that cid listed in the androidinfo.txt file that is in the firmware zip...
Thanks again for all your help...
**UPDATE** I now have S-OFF, I can't believe how smooth the whole process is now with sunshine compared to almost all of my other HTC phones, hats off to those guys for sure... Thank you very much for getting me this far!!! I appreciate it very much...

apaquette420 said:
Ok so I got the bootloader unlocked and TWRP installed, right now I am taking a backup of the phones current state just in case. Now I just need to flash the SuperSU beta from the link you provided and then run sunshine, after that I would like to flash the latest OS for my phone, but I am not sure which version to use, I think this one is correct http://forum.xda-developers.com/one-m9/development/firmware-red-t3097678 but I am not 100% sure, do you know if this is the correct latest version for my phone?
Also should I supercid my phone before updating the firmware by entering "fastboot oem writecid 11111111" while in download mode? because my cid is TELUS001 and I do not see that cid listed in the androidinfo.txt file that is in the firmware zip...
Thanks again for all your help...
**UPDATE** I now have S-OFF, I can't believe how smooth the whole process is now with sunshine compared to almost all of my other HTC phones, hats off to those guys for sure... Thank you very much for getting me this far!!! I appreciate it very much...
Click to expand...
Click to collapse
I was actually just going to tell you to type
Code:
fastboot getvar all
while in download mode and to copy and paste that into a file a text file somewhere so you always have it. then you can supercid. I actually have never seen any firmware for your carrier. what is your mid? this is where I get all of my firmware from. I learned how to remove the red text using hex editor and I also throw in a custom splash screen before I flash.
Here is a link for your stock firmware. not sure what the most up to date is but most custom roms are using the WWE firmware anyways.
p.s. either quote me or tag me if you need a faster response. I'm not getting notifications otherwise.

bigp951 said:
I was actually just going to tell you to type
Code:
fastboot getvar all
while in download mode and to copy and paste that into a file a text file somewhere so you always have it. then you can supercid. I actually have never seen any firmware for your carrier. what is your mid? this is where I get all of my firmware from. I learned how to remove the red text using hex editor and I also throw in a custom splash screen before I flash.
Click to expand...
Click to collapse
My mid is 0PJA11000 but the one that is listed in the androidinfo.txt file of the firmware that I linked earlier is 0PJA10000, does this mean I cant use it? in all I plan to flash ViperOneM9 3.5.0 for the rom and it says it requires 2.10 but my phone is currently at 1.32

apaquette420 said:
My mid is 0PJA11000 but the one that is listed in the androidinfo.txt file of the firmware that I linked earlier is 0PJA10000, does this mean I cant use it?
Click to expand...
Click to collapse
I honestly don't know if the hardware is any different but it looks like your mid is the same as the dev ed. check this one out. @clsA is very knowledgeable on the m9. I learned a lot of what I know from his posts.
Personally I have gotten so relaxed that I just change my mid and cid to whatever it is I want to flash and just go for it. But I also understand that I'm risking a brick by doing so..lol

bigp951 said:
I honestly don't know if the hardware is any different but it looks like your mid is the same as the dev ed. check this one out. @clsA is very knowledgeable on the m9. I learned a lot of what I know from his posts.
Personally I have gotten so relaxed that I just change my mid and cid to whatever it is I want to flash and just go for it. But I also understand that I'm risking a brick by doing so..lol
Click to expand...
Click to collapse
took a look at the thread and it looks like all I need to do to flash 2.10 which is the international version is type fastboot oem writemid 0PJA10000 while in downloader mode because like you said and which I also confirmed in the other thread that my phone is the same as the dev ed and I should be able to switch back and forth with the same command

apaquette420 said:
took a look at the thread and it looks like all I need to do to flash 2.10 which is the international version is type fastboot oem writemid 0PJA10000 while in downloader mode because like you said and which I also confirmed in the other thread that my phone is the same as the dev ed and I should be able to switch back and forth with the same command
Click to expand...
Click to collapse
If going to dev ed I have had better luck running an RUU and accepting ota's as far as the radio goes. my reception went from 2 bars to full bars doing it that way verses just flashing the newest firmware. But it is a very long and tedious process and since you just got your m9 I'm sure you want to use it already..
What rom are you thinking about flashing?

bigp951 said:
If going to dev ed I have had better luck running an RUU and accepting ota's as far as the radio goes. my reception went from 2 bars to full bars doing it that way verses just flashing the newest firmware. But it is a very long and tedious process and since you just got your m9 I'm sure you want to use it already..
What rom are you thinking about flashing?
Click to expand...
Click to collapse
I am hoping to flash ViperOneM9 3.5.0, it was the only rom I ran on my M7 and I loved it, so I'm really hoping to have it on this phone too... I just asked in the roms thread to see if anyone else there is on my same network to see how they got it working... and to be honest I don't mind waiting in order to get things done the right way the first time, know what I mean...

apaquette420 said:
I am hoping to flash ViperOneM9 3.5.0, it was the only rom I ran on my M7 and I loved it, so I'm really hoping to have it on this phone too... I just asked in the roms thread to see if anyone else there is on my same network to see how they got it working... and to be honest I don't mind waiting in order to get things done the right way the first time, know what I mean...
Click to expand...
Click to collapse
Viper is one of my favorites. Was using it for months. They are good about replying too... A little too good because you get spoiled. Then when you post on other roms and nobody ever replies you realize how good those guys are..haha
check out the second line on this thread to reclaim 3 gb of data after using sunshine. I've been s-off for months and just saw this today.

bigp951 said:
Viper is one of my favorites. Was using it for months. They are good about replying too... A little too good because you get spoiled. Then when you post on other roms and nobody ever replies you realize how good those guys are..haha
check out the second line on this thread to reclaim 3 gb of data after using sunshine. I've been s-off for months and just saw this today.
Click to expand...
Click to collapse
do you know where I can find the latest international RUU? what rom are you running now?

@bigp951
Ok so I got the firmware updated to the latest international version 2.10 and was able to flash the ViperOne Rom and I love it just like I did for my M7... Everything is working great, except I have the problem that you mentioned would happen, I only show 1 bar for my signal strength, could you please let me know exactly what you had to do to fix it? Also, I would just like to say thank you once more, you helped me out a great deal and you made my upgrade to the M9 an absolute cake walk, so thank you very much for everything and for explaining the proper steps to take, I appreciate it very much...

Return to stock from VenomRom

Hi.. I've not used my M8 for some time and I'd like to put it back on a stock rom and give it to my mother-in-law. Unfortunately I can't remember how to do much with regards to rooting, fuu, roms, etc, and I'm finding the forums a bit overwhelming.
It is an ATT phone, but the CID was changed to 11111111 so I could sim-unlock it. It's currently on 4.16.401.10, and on the ViperOneM8 v 4.6.1.
We need it to remain sim-unlocked, and on the stock rom.. I've looked around a little bit and found [tutorial] How to get back on stock with TWRP Stock Nandroid Backups. I've downloaded M8_6.12.401.4_WWE_FullStock.zip - if I flash this in TWRP will it return the phone to a stock rom, and will receive OTA updates?
Thank you for any help or answers you can give me,
mewikime

mewikime said:
Hi.. I've not used my M8 for some time and I'd like to put it back on a stock rom and give it to my mother-in-law. Unfortunately I can't remember how to do much with regards to rooting, fuu, roms, etc, and I'm finding the forums a bit overwhelming.
It is an ATT phone, but the CID was changed to 11111111 so I could sim-unlock it. It's currently on 4.16.401.10, and on the ViperOneM8 v 4.6.1.
We need it to remain sim-unlocked, and on the stock rom.. I've looked around a little bit and found [tutorial] How to get back on stock with TWRP Stock Nandroid Backups. I've downloaded M8_6.12.401.4_WWE_FullStock.zip - if I flash this in TWRP will it return the phone to a stock rom, and will receive OTA updates?
Thank you for any help or answers you can give me,
mewikime
Click to expand...
Click to collapse
You can't flash it in recovery. You need to flash it in fastboot, or via SDcard/hboot.
I've given instructions to another user recently on the ViperOneM8 thread. You can see them here.

xunholyx said:
You can't flash it in recovery. You need to flash it in fastboot, or via SDcard/hboot.
I've given instructions to another user recently on the ViperOneM8 thread. You can see them here.
Click to expand...
Click to collapse
@xunholy do I need to use 0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed.zip that you linked to in your instructions, or a different one for mine? I'm a bit nervous because that says HTC Europe, and mine is ATT in the US. I'm s-off, too, while the person you were helping there was s-on

mewikime said:
@xunholyx do I need to use 0P6BIMG_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_Radio_1.29.214500021.12G_20.72.4196t.01_release_464360_signed.zip that you linked to in your instructions, or a different one for mine? I'm a bit nervous because that says HTC Europe, and mine is ATT in the US. I'm s-off, too, while the person you were helping there was s-on
Click to expand...
Click to collapse
If you want to keep WWE firmware, yes.
If you want to go back to AT&T firmware (and this is probably a better option for you), there is another way.
Go here (HTC's US website). Scroll down to the Manual System Update Instructions, and read them. There is an RUU download at the end of the instructions.